Waifu Model Kits

The SO.SKILL x Eastern Model 1/12 The Nine-Tailed Fox Da Ji is a snap-fit, full-articulation plastic model kit produced as a collaboration between SO.SKILL (圣斯基) and Eastern Model (御模道) for the long-running ATK Girl line. The kit depicts the nine-tailed fox Da Ji and converts between a light form and a fully armored "berserk" configuration through swappable limbs, a swappable head, and a rear-mounted Nine-Tail Annihilation System. ATK Girl is Eastern Model's articulated female figure series, and this release introduces a newly tooled base body with revised proportions, updated face sculpts, and reinforced one-piece arm and leg parts. Key Features Dual Light and Armed Forms - swap the limbs and head and attach the Nine-Tail system to convert between the unarmed light form (approx. 17 cm) and the armored form (approx. 19 cm). Nine-Tail Annihilation System - a rear-mounted array of eight articulated mechanical tails with multi-segment joints, integrated thrusters, and six transparent "Huanmei" blades that slide out and detach for hand-held use. Ten Face Options - five pad-printed expression faces plus five blank faces for water-slide decal customization, all swapped by removing the front hair base. Transformable Ninth-Tail "Qingshi" Weapon - a single hand-held armament that functions as both a staff and a rifle and stows on the Nine-Tail system's weapon rack as the ninth tail. Newly Tooled Base Body - revised proportions with one-piece arm and leg parts and combination interlocking joints, described by Eastern Model as a no-fall-off articulation upgrade over earlier ATK Girl bodies. Posing Accessories - multiple replacement hand pairs plus OK, pointing, and finger-heart gestures, a wire-cored fur boa for the light form, six thruster effect parts, and a universal display stand. Material and Finish - PVC/ABS parts with a matte finish and slightly translucent skin-tone plastic; red markings and panel lines applied via the included water-slide decal sheet. Builder Context This is a snap-fit kit suited to beginner and intermediate builders, with no cement required and pad-printed faces and pre-colored armor that allow a complete look without painting. Decal application and light seam cleanup are the main finishing steps. The build and articulation are comparable to other ATK Girl machine girl kits and to entry-level Bandai 30MS figures, though reviewers note loose ball joints and tight leg joints that benefit from careful handling. Why Build This Kit The SO.SKILL x Eastern Model 1/12 The Nine-Tailed Fox Da Ji is best suited to collectors of articulated machine girl figures who want a kit that displays in two distinct configurations rather than a single fixed pose. Its main point of difference within the ATK Girl line is the newly tooled base body, which uses one-piece arm and leg parts and revised proportions that depart from the thinner limbs of earlier releases in the series. On a shelf the light form stands about 17 cm and the armed form about 19 cm, placing it close in height to a Bandai 30MS kit but with a denser accessory count, including ten face options and the multi-tail Nine-Tail Annihilation System. Compared with snap-fit Bandai kits at a similar price, Da Ji reaches a display-ready look without painting thanks to pad-printed faces and pre-colored armor, but the red detailing relies on the included water-slide decals rather than molded color separation. Builders should know that reviewers report loose ball joints, tight hip joints, and small parts such as the side bangs and tail blades that can pop off during handling, so gluing select connection points and easing tight joints is recommended before posing. Box Contents Da Ji main body (light form) x1 Pad-printed replacement faces x5 Blank faces x5 Replacement hand pairs x4 "OK" hand x1 Pointing hand x1 Finger-heart hand x1 Replacement front bangs x1 "Tianhu Face Armor" (天狐面甲) armed-form head x1 "Pouxin Claw" (剖心爪) armed arms x1 pair "Zhonggu Hook" (踵骨钩) armed legs x1 pair Nine-Tail Annihilation System (玖尾歼灭系统) x1 "Qingshi" (倾世) ninth-tail staff/rifle x1 Thruster effect parts x6 Wire-cored fur boa accessory x1 Water-slide decal sheet x1 Universal display stand x1 Specifications Brand SO.SKILL x Eastern Model (御模道) Series ATK Girl Character The Nine-Tailed Fox Da Ji Scale 1/12 Type Full articulation plastic model kit Height (Light Form) approx. 17 cm Height (Armed Form) approx. 19 cm Runners 26 Material PVC / ABS Assembly Snap-fit (no cement required) Finish Matte, pre-colored; water-slide decals included Face Options 10 (5 pad-printed, 5 blank) First-Edition Note Light-pink armed-form hair; standard release uses two dark-tone hair parts Preorder Notice:This item is currently on preorder and will be shipped once available. Please be aware that cancelling a preorder will incur a 25% restocking fee. For detailed information on our preorder and cancellation policies, please visit our FAQs page.

MS General MG-01 Zhao Yun x Cheng Huang Ver. 2.0 Model Kit The MS General MG-01 Zhao Yun x Cheng Huang Ver. 2.0 is a 1/10 scale plastic model kit from MS General's Syokon-Ki series, themed around characters from Romance of the Three Kingdoms and Chinese mythology. This updated version of the original MG-01 release features Zhao Yun, reimagined as a mecha girl warrior, alongside her companion divine beast Cheng Huang. Ver. 2.0 introduces new equipment including the Longdan Spear and Guerrilla Cannon armament system, along with expanded customization options through multiple 3mm connector ports. Key Features Four Pre-Painted Faceplates: Zhao Yun includes four pre-painted interchangeable expressions plus blank faceplates, using a simple and efficient swapping mechanism. Longdan Spear (Dragon Gall Spear): Signature weapon featuring a metallic strip on the handle and 3mm ports on both sides, allowing combination with the Guerrilla Cannon armament. Guerrilla Cannon Armament: Modular floating cannon system with a dedicated display stand for showcasing different configurations. Cheng Huang Divine Beast Mecha: Full beast-form mecha with wide-range swivel joints on neck and limbs, telescopic shoulder mechanisms for enhanced articulation, and an extendable torso and tail for lateral movement. Dual-Use Cheng Huang System: Cheng Huang can serve as a rideable mount for Zhao Yun or transform into wearable armor for the character. Optional Rear Thruster: Cheng Huang includes an installable rear thruster unit with adjustable mounting direction. Extensive 3mm Port System: Multiple 3mm connection ports throughout the body and weapons enable DIY equipment customization and future expansion. Five Connector Types: Kit includes five varieties of connectors for free combination between the main body, Guerrilla Cannon armament, and Cheng Huang. Decals and Stickers: Includes metallic green and silver reflective stickers along with a large quantity of marking decals for the character, divine beast, and weapons. Box Contents Zhao Yun character body components Four pre-painted interchangeable faceplates and blank faceplates Interchangeable hand parts (PVC) Cheng Huang divine beast mecha components Armor set components Longdan Spear with metallic handle strip Guerrilla Cannon armament parts and display stand Rear thruster unit and connector parts Five types of expansion connectors Metallic green and silver reflective stickers Marking decal sheet Metal parts (spear handle strip, display stand screws) Display base Instruction manual Specifications Brand MS General Series Syokon-Ki (Romance of the Three Kingdoms) Model Number MG-01 Product Name Zhao Yun x Cheng Huang Ver. 2.0 Scale 1/10 Height Approx. 18 cm (Zhao Yun) Materials ABS, PVC, POM, metal parts Joint Material POM (runners C and Z) Product Type Plastic assembly model kit Recommended Age 15+ IP Original design (Chinese mythology / Romance of the Three Kingdoms)

MS General 1/10 UBP-R02T Falcon Model Kit The MS General 1/10 UBP-R02T Falcon is a large-scale mecha girl plastic model kit from MS General’s Mecha Break series. This is a Third Party Gundam Gunpla Like Mecha Model Kit and is not affiliated with Bandai or the Gundam franchise. Designed at 1/10 scale, Falcon combines a humanoid character body with integrated mechanical armor and modular weapon systems for a display-focused build. Key Features Scale: 1/10 scale mecha girl model kit. Series: Mecha Break. Character Design: Armored humanoid body with mechanical limb and armor integration. Face Options: Multiple interchangeable face parts shown in official materials. Hair Options: Includes interchangeable hair parts for different display expressions. Backpack Equipment: Mechanical wing-style backpack system for combat and display configurations. Display Support: Includes a dedicated display base for stable standing and action poses. Weapon Systems Falcon Longbow: Large wing-mounted ranged weapon system. Falcon Close-Combat Unit: Compact weapon configuration designed for short-range combat poses. Falcon Variable Wing Equipment: Wing components capable of multiple deployment configurations as shown. Box Contents UBP-R02T Falcon main body parts Interchangeable face parts Interchangeable hair parts Mechanical armor components Wing-style backpack and weapon equipment Display base and support arm Instruction manual Specifications Brand MS General Series Mecha Break Model UBP-R02T Falcon Scale 1/10 Category Third Party Gundam Gunpla Like Mecha Model Kit

Official Nuke Matrix Retailer LA Scale Model is an authorized retailer of Nuke Matrix. All Nuke Matrix model kits are 100% genuine and sourced directly from the manufacturer. Overview The Nuke Matrix 1/12 Cyber Forest Fantasy Girls Vivienne Hayha CF01 F.O.X. Long-Range Striker Unit Ver. Arctic White Fox (極地白狐) is a limited-edition color variant of the CF01 Vivienne Hayha kit from Nuke Matrix's original Cyber Forest Fantasy Girls series. Originally released as a CJ2024 convention exclusive, this version features an arctic white color scheme across the entire runner set, replacing the standard navy and dark tones of the original CF01 with a winter-operations aesthetic. Vivienne Hayha is the Empire's top sniper and leader of Fox Team - the first character released in the Cyber Forest lineup and a successful test subject of the Empire's Maiden Project. Key Features Limited-Edition Arctic White Fox Color Scheme - Convention-exclusive white color variant with arctic-themed runner colors, distinct from the standard CF01 release 1/12 Scale, Approx. 16 cm Assembled Height - Full character body with articulated joints for a wide range of posing options Two Selectable Body Configurations - One complete body per kit with two build options for armored and standard configurations Seven Weapons Included - F.O.X. Type I sniper rifle, F.O.X. Type I assault rifle, F.O.X. Type II sniper rifle, pulse-type magnum, "My Fang" tactical dagger, Apocalyptor light sword, and the large cross unit (ZERO System) Pre-Painted and Blank Face Plates - Three tampo-printed face plates plus four blank face plates for custom painting Thermal Conversion Tactical Scarf - Cloth accessory with Fox Team insignia, designed for Vivienne's cold-environment sniper operative setting Water Decals and Crystal Stickers - Dedicated detail markings for enhanced surface detail Builder Context The Ver. Arctic White Fox shares the same snap-fit construction as the standard CF01 - no painting or cement is required, though the white color scheme particularly benefits from panel lining to bring out detail. Build complexity is comparable to a Bandai RG-grade kit. Builders familiar with Kotobukiya Frame Arms Girl or Bandai 30MS kits will find a similar construction approach. The white plastic can show nub marks more visibly than darker colors, so careful nub cleanup with a hobby knife and sanding sticks is recommended. Why Build This Kit The Nuke Matrix CF01 Vivienne Hayha Ver. Arctic White Fox is a limited-edition convention exclusive that offers a distinct arctic winter-operations color scheme unavailable in the standard CF01 release. With seven individually named weapons - two sniper rifles, an assault rifle, a magnum, a dagger, a beam sword, and the oversized ZERO System cross unit - the CF01 remains the most accessory-dense kit in the entire Cyber Forest Fantasy Girls lineup. The white color variant is especially suited to builders who want a striking shelf display that stands out alongside standard-color Cyber Forest kits, and the lighter plastic makes it an attractive base for custom paint schemes. As a limited release, the Arctic White Fox version is not expected to be restocked once current inventory is sold through, making it a collector-focused purchase. Builders new to Nuke Matrix should know that face plate pegs and hand joints on Cyber Forest kits are smaller and more delicate than Bandai equivalents, so dry-fitting before final assembly is recommended. Box Contents Main body parts in arctic white color scheme (one complete body, two selectable body configurations) Pre-painted face plates x3 Blank face plates x4 Interchangeable hand parts x12 Cable part x1 Large cross unit (ZERO System) x1 F.O.X. Type I sniper rifle x1 F.O.X. Type I assault rifle x1 F.O.X. Type II sniper rifle x1 Pulse-type magnum x1 "My Fang" tactical dagger x1 Apocalyptor light sword x1 Thermal conversion tactical scarf x1 Display base and support arm x1 Water decal sheet x1 Crystal sticker sheet x1 Instruction manual x1 Specifications Brand Nuke Matrix Series Cyber Forest Fantasy Girls Character Vivienne Hayha Unit Designation CF01 F.O.X. Long-Range Striker Unit Version Ver. Arctic White Fox (極地白狐) - Limited Edition Scale 1/12 Assembled Height Approximately 16 cm Materials ABS, PVC Product Type Plastic Model Kit (Assembly Required) Decals Water decals and crystal stickers included Display Base Included Backorder Notice:This item is currently on backorder and will be shipped once available. Please be aware that cancelling a backorder will incur a 25% restocking fee. For detailed information on our backorder and cancellation policies, please visit our FAQs page.

Official Nuke Matrix Retailer LA Scale Model is an authorized retailer of Nuke Matrix. All Nuke Matrix model kits are 100% genuine and sourced directly from the manufacturer. Nuke Matrix Cyber Forest Fantasy Girls Lirly Bell Special Edition Model Kit The Nuke Matrix 1/12 Cyber Forest Fantasy Girls Lirly Bell Special Edition – Remote Attack Battle Base Info Tactician (天眼跃兔—Ver.镜像潜行) is a plastic assembly model kit produced by Nuke Matrix. This is a Third Party Gundam Gunpla Like Mecha Model Kit and is not affiliated with Bandai or the Gundam franchise. This kit is a 1/12 scale assembly model with an assembled height of approximately 16 cm. One complete body can be assembled per kit, with two selectable body configurations included. Box Contents Body parts x1 (one complete body per kit, two body options available) Pre-painted face parts x4 Blank face parts x4 Interchangeable hand parts x12 Quadruped robot x1 Handgun x1 Carrot missiles x2 Holographic projection system x1 Destruction cannon firing effect part x1 CP-95 assault rifle x1 Victor Type II x1 High-explosive shotgun x1 Pulse baton x1 Detail water decals x3 Crystal sticker x1 Cable wire x1 Display base and support stand x1 Instruction manual x1 Specifications Brand Nuke Matrix Line Cyber Forest Fantasy Girls Product Name 天眼跃兔—Ver.镜像潜行 Model Number FF0111V Scale 1/12 Assembled Height Approximately 16 cm Product Type Third Party Gundam Gunpla Like Mecha Model Kit Decals Water decals included Display Base Included

Official Nuke Matrix Retailer LA Scale Model is an authorized retailer of Nuke Matrix All Nuke Matrix model kits are 100% genuine and sourced directly from the manufacturer. Nuke Matrix Cyber Forest Cyclone Hopper Model Kit The Nuke Matrix Cyber Forest Cyclone Hopper is a highly articulated original mecha girl kit from Nuke Matrix’s Cyber Forest lineup. This is a Third Party Gundam Gunpla Like Mecha Model Kit and is not affiliated with Bandai or the Gundam franchise. The kit combines a humanoid character body with modular armor systems, a transformable combat motorcycle, and extensive wind-themed effect parts designed for high-mobility action displays. Key Features Dual Body Configuration: Includes both a human body and an armored body, allowing multiple display states. Vehicle Integration: Comes with the Storm Chaser motorcycle, designed to pair directly with the Cyclone Hopper character. Effect Parts: Includes multiple wind-based and attack effect parts such as Spines Cutter, High-pressure Air Cutter, Cyclone Kick, and spiral effects. Pre-painted Runners: Select runners are pre-painted to enhance surface detail straight out of the box. Display Support: Action base included for dynamic airborne and combat poses. Customization: Multiple face plates, hand types, feet options, and armor components included for varied expressions and setups. Compatibility: Includes three different neck joint sizes, compatible with other mecha girl kits on the market. Box Contents Human body x1 Armour body x1 Storm Chaser motorcycle x1 Insect Instrument Unit (helmet) x1 Backpack x1 Strike Trampler x2 Orthoptera Booster x2 Spines Cutter effect parts x2 Spines Cutter Mode II effect parts x2 High-pressure Air Cutter effect parts x2 QianJi Spiral effect part x1 Spiral Cut effect part x1 Cyclone Kick effect part x1 Armour hands x6 pairs Standard hands x7 pairs Pre-printed face plates x5 Blank face plates x5 Sneaker feet x1 pair Naked feet x2 pairs Cloth suit x1 set Matrix Driver - Acrididae Type I x1 Water decals x2 Action base Different size neck joints x3 Instruction manual Specifications Brand Nuke Matrix Line Cyber Forest Model Name Cyclone Hopper Product Type Third Party Gundam Gunpla Like Mecha Model Kit Decals Water decals included Pre-painted Parts Some runners pre-painted Display Base Action base included Compatibility Multiple neck joint sizes included for cross-compatibility Backorder Notice:This item is currently on backorder and will be shipped once available. Please be aware that cancelling a backorder will incur a 25% restocking fee. For detailed information on our backorder and cancellation policies, please visit our FAQs page.

Official Nuke Matrix Retailer LA Scale Model is an authorized retailer of Nuke Matrix All Nuke Matrix model kits are 100% genuine and sourced directly from the manufacturer. Nuke Matrix 1/12 Mad Wolf Night Shadow Demon Wolf The Nuke Matrix 1/12 Mad Wolf Night Shadow Demon Wolf is a limited special edition release in the Cyber Forest Fantasy Girls lineup. This premium third party Gundam Gunpla-like mecha model kit features a dramatic Night Shadow color theme and partial iridescent coating on selected armor sections for a striking display finish. Product Highlights Special Edition: Night Shadow Demon Wolf color variant 1/12 scale third party Gundam Gunpla-like mecha model kit Limited-edition release with exclusive color styling Full color separation for clean visual presentation Partial iridescent spray finish on selected armor pieces Medium panel-line complexity suitable for most hobby builders Includes water-slide decals for enhanced detail Special Edition Features Unique Night Shadow Demon Wolf themed armor and color layout Enhanced iridescent surface finish for premium visual effect Exclusive parts and color palette specific to this limited version Complete color separation for a polished build out of the box Box Contents Mad Wolf Night Shadow Demon Wolf model kit parts (1/12 scale) Special-edition armor parts with iridescent effects Fully color-separated part runners Water-slide decal sheet Instruction manual Description This special edition of the Mad Wolf design introduces a bold Night Shadow-themed appearance, emphasizing darker tones, metallic accents, and iridescent highlights on key armor panels. The kit retains the mechanical styling and articulation seen across the Cyber Forest Fantasy Girls series, providing a versatile build suitable for display or dynamic posing. With its polished finish, distinctive color separation, and limited-edition styling, the Mad Wolf Night Shadow Demon Wolf variant offers a standout presence in any mecha model collection. It's designed for builders who enjoy detailed mechanical kits with unique visual themes. Specifications Brand Nuke Matrix Series Cyber Forest Fantasy Girls Edition Special Edition / Limited Edition Theme Night Shadow Demon Wolf Scale 1/12 Color Separation Complete Panel-line Complexity Medium Surface Finish Partial iridescent coating Includes Decals Water-slide decals included

MS General 1/10 Seven Deadly Sins – Sloth & Rhino Full Set Model Kit This MS General 1/10 Seven Deadly Sins Sloth Full Set includes both the Sloth figure and her large mechanical Rhino support unit. As a third party Gundam Gunpla-like mecha model kit, the set combines stylized character design with a heavy mechanized companion, offering a standout build for hobbyists seeking a larger and more dynamic display piece. Product Highlights Full set: includes Sloth figure and her Rhino mechanical partner 1/10 scale third party mecha model kit with character and mech build components Highly articulated Sloth figure with armor and mechanical accessories Large Rhino mecha unit capable of multiple poses and support functions ABS and PVC molded parts designed for durability and display Color-molded parts reduce the need for painting Description The Sloth & Rhino Full Set from MS General’s Seven Deadly Sins lineup provides both a detailed figure build and a substantial mechanical companion. Sloth features expressive armor styling, multiple articulation points, and interchangeable mechanical components, while the Rhino unit serves as a fully poseable support mecha with a powerful armored presence. Designed for builders who enjoy character-and-mech pairings, this set offers a balanced combination of stylized figure modeling and heavy mechanical construction, making it ideal for prominent display or customization. Box Contents Sloth figure model kit Mechanical Rhino full build unit Armor parts and mechanical attachments Interchangeable hand parts Weapon and accessory components Instruction manual Specifications Brand MS General Series Seven Deadly Sins Set Includes Sloth figure + Rhino mecha Scale 1/10 Materials PVC, ABS Figure Height Approx. 16 cm Companion Mech Fully poseable Rhino unit

Official Animester Retailer LA Scale Model is an authorized retailer of Animester. All Animester model kits are 100% genuine and sourced directly from the manufacturer. Animester x Nuclear Gold Reconstruction 1/12 Polaris Star White (紫微星·白) The Animester x Nuclear Gold Reconstruction 1/12 Polaris Star White is a mecha musume (mecha girl) plastic model kit featuring both a detailed figure and a full-size mechanical serpent companion called the Deep Space Viper Raider. This is the second entry in Animester's collaboration with Nuclear Gold Reconstruction following the White Dragon Knight Galahad, and it represents a significant increase in volume and playability over its predecessor - the box is substantially larger with two-layer runner organization, and the kit includes both a light-armor figure and a fully articulated mecha beast rather than the armor-swap format of Galahad. Key Features Dual-Unit Kit - Includes both the Polaris Star White figure (~175 mm tall) and the Deep Space Viper Raider mechanical serpent (~405 mm fully extended), each buildable as standalone display pieces or combinable into a full-armor merged form 6 Pre-Painted Faceplates - Standby smile, tongue-out intoxicated, raised-eyebrow mocking, manga-style angry, starry-eyed happy, and battle-crazed expressions, all with detailed pupil, shadow, and makeup printing Multi-Mode Weapon System - The "Hunter's Fang" triple-pronged bow converts into the "Starpiercer" javelin through blade folding and grip reconfiguration, and includes wire for a blade-release display mode Serpent Transformation - The Deep Space Viper Raider transforms between beast mode, flight mode (with fold-out seat and handlebars for the figure to ride), stealth mode, and combination mode that docks directly onto the figure's legs Hidden Armament - The serpent head conceals deployable "Fire Cannons" with linkage-driven barrel extension, "Blade Turrets" with flip-open transparent covers, and triple graduated blades that fan out independently Pre-Painted Gold and Iron Accents - Gold armor sections are pad-printed in a dark gold tone with smooth finish; select black-iron parts are also pad-printed on exposed surfaces for color accuracy without painting Chinese-Inspired Design - The figure's outfit draws from qipao (high-slit Chinese dress) silhouettes with asymmetric thigh armor, soft-rubber ribbon sashes on side skirts, and a "Crown of the Star World" folding visor headpiece with angular horn elements Builder Context This is an intermediate-level build suited for hobbyists who have completed at least a few HG or RG Bandai kits. The kit is snap-fit with no cement required, and the pre-painted gold and skin-tone parts mean a display-ready finish is achievable without an airbrush. However, the runner layout is fragmented - parts are split across many small scattered sprues rather than consolidated by assembly group, which can slow down the build. Builders familiar with Kotobukiya Frame Arms Girl or Bandai 30MS kits will find the construction logic similar, though the part count and mechanical complexity of the serpent unit push it beyond typical mecha musume territory. Why Build This Kit The Animester x Nuclear Gold Reconstruction Polaris Star White stands out in the mecha musume market by including a full mechanical beast companion rather than just swappable armor sets - the Deep Space Viper Raider alone is over 400 mm when extended, making the combined display presence comparable to a 1/100 scale mecha kit. Compared to the previous White Dragon Knight Galahad from the same collaboration, Polaris Star White delivers improved runner quality, a larger overall volume, and substantially more play patterns including serpent transformation, figure-serpent combination, and wire-controlled blade deployment. Six pre-painted faceplates with high-detail printing put this kit ahead of most competitors in the mecha musume segment, where two to three expressions is standard. The kit is a strong choice for builders who want a visually dense display piece that goes beyond the typical girl-in-armor format, though prospective buyers should be aware that the serpent's multi-segment body requires careful joint management to hold poses, and several sharp spike elements throughout the design can catch fingers during handling. Box Contents Polaris Star White figure model kit (main body, armor, hair components) Deep Space Viper Raider mechanical serpent model kit (multi-segment body, head unit with hidden weapons) 6 pre-painted faceplates (standby, intoxicated, mocking, angry, happy, battle) 6 blank faceplates for custom waterslide decal expressions 5 pairs of interchangeable hands (1 default pair + 4 additional pairs including weapon-grip hands) "Hunter's Fang" bow weapon "Starpiercer" javelin arrow and conversion parts 6 detachable blades with grip handles (from serpent unit, usable as hand weapons) Wire for blade-release display mode 6 Flame-Glazed Blades - transparent red replacement blades (first-batch bonus) 2 transformable display bases A4 waterslide decal sheet (armor stripe patterns and face expressions) Instruction manual Specifications Brand Animester x Nuclear Gold Reconstruction Series Original Character Scale 1/12 Figure Height Approx. 175 mm (6.9 in) Full Equipment Height Approx. 405 mm (15.9 in) Materials ABS, PVC, POM Decals Waterslide decals included Country of Origin China Preorder Notice: This item is currently on preorder and will be shipped once available. Please be aware that cancelling a preorder will incur a 25% restocking fee. For detailed information on our preorder and cancellation policies, please visit our FAQs page.

Special Edition: A.T.K. Girl Camilla Silver Version 幽银血魅 Introducing the latest addition to the A.T.K. Girl series: the Endless Night Vampire Camilla 1/12 Scale Model Kit. This intricately designed model kit seamlessly blends gothic aesthetics with futuristic elements, resulting in a captivating and dynamic figure. The kit features a highly articulated 1/12 scale figure of Vampire Camilla, standing approximately 6.69 inches (17 cm) tall. Crafted from high-quality ABS and PVC materials, this model offers exceptional durability and detail. The figure showcases a sharp and distinct design, incorporating elements like suspenders, stockings, and high heels. The classic red and black color scheme is complemented by silver accents with a metallic pre-spray, enhancing its visual appeal. Vampire Camilla comes equipped with an impressive array of accessories to enhance customization and display options: Dual-Body Configuration: Includes both a standard body and an armored body, allowing for versatile display options. Covenant Bat "Laura": A mechanical bat familiar equipped with autonomous AI, capable of transforming into armor for Camilla. It features both retracted and flight modes. Crimson Thorn: A versatile melee weapon that can extend a crimson energy blade from its hilt. Sin and Punishment: A pair of short daggers that inflict both physical and psychological damage upon the enemy. Cause and Effect: A set of silver blades, one long and one short, which can combine to form the double-ended scythe "Causality Reaper." Blood Effect Parts: Special effects pieces that simulate dynamic battle scenes. Interchangeable Faces: Five pre-painted facial expressions and five blank faces for customization. Hand Options: Six pairs of hands for the standard body and three pairs for the armored body, allowing for a variety of poses and weapon handling. Display Stand: A sturdy base to support dynamic poses. Decals: Eye decals, marking decals, and rhinestone stickers for added detail. Collectible Card: A character card featuring Vampire Camilla. Notably, certain parts of the kit come pre-painted, allowing for a more streamlined assembly process and a visually striking final product. The model also features an upgraded body sculpt, reflecting enhanced lines and proportions to accurately depict Camilla's alluring and enigmatic presence. Whether you're a seasoned model builder or a newcomer to the hobby, the A.T.K. Girl Endless Night Vampire Camilla kit offers an engaging and rewarding experience, culminating in a dynamic figure that's sure to be a standout in any collection. BACKORDER Notice: This item is currently on preorder and will be shipped once available. Please be aware that cancelling a backorder will incur a 25% restocking fee. For detailed information on our backorder and cancellation policies, please visit our FAQs page.

The SOSKILL Hatsune Miku Series Snow Miku Model Kit, titled “Frozen Echo” is the long-awaited finale of the SaintSki Miku line. This detailed and expressive model captures Snow Miku’s winter charm across multiple themed outfits, complemented by a fully transformable snow vehicle and a rich set of accessories for imaginative assembly and display. Key Features: Figure Scale and Dimensions: Snow Miku stands approximately 160mm tall. Mecha deer reaches 220mm, and the snowmobile measures about 175mm in height. Three Outfit Modes: Basic Costume: A soft blue-and-white snowflake-themed outfit. Performance Outfit: Includes ribboned mini hat and butterfly bow for concert-ready style. Rescue Gear: A heartwarming rescue uniform complete with winter tools and accessories. Accessory Arsenal: Includes 7 interchangeable facial expressions (including masked and blank faces), magnetic parts, scarf, goggles, hand options, PE soft skirts for posing, rescue syringe, multi-function medikit that unfolds into a keyboard, and more. Transformable Vehicle: The mechanical deer and snowmobile can morph into one another, blending biotechnological aesthetics with mechanical design. Both forms feature articulated joints, reins, deployable skis, and rear-mounted thrusters with moving nozzles. Additional Items: Includes a snow rabbit companion with matching scarf and pre-painted face, dual base stands (round and square), snowy printed backdrop board, and a collectible ID clear card of Snow Miku. Release Information: Scheduled for release in Q3 2025, this model kit is crafted from ABS, PVC, PE, magnets, paper, and metal. It offers a versatile and expressive build experience for both fans of Hatsune Miku and collectors of stylized sci-fi model kits. The SOSKILL Hatsune Miku Series Snow Miku Model Kit is a winter-themed showcase of character, creativity, and clever engineering — ideal for display, photography, and immersive building fun year-round.

Souling Toys 1/12 Daytime Meteor Mecha Musume White Dragon Model Kit The Souling Toys 1/12 Daytime Meteor Mecha Musume White Dragon Model Kit is a striking third-party figure model that blends mecha styling with “mecha-musume” character design. Featuring articulated build structure and a range of weapons and accessories, this kit delivers character personality with mechanical flair at a 1/12 scale suitable for display collectors and customizers alike. Product Highlights 1/12 scale mecha musume model kit with articulated build White Dragon character styling with mechanical accents Multiple external armor parts and weapons for pose variety Color-separated plastic runners for crisp assembly with minimal paint Designed for display and character interpretation poses Includes decals/stickers for detailed markings Description The White Dragon “Daytime Meteor” merges a stylized female mecha character with detailed mechanical design elements. This model kit embraces both aesthetic personality and functional structure through articulation points at major joints, allowing a wide range of expressive poses. Armor and weapon accessories enhance the theme and add visual interest for display. Ideal for collectors who enjoy original IP mecha musume kits, this build balances character appeal with mechanical complexity, making it a versatile addition to a shelf, diorama, or photography setup. Box Contents White Dragon main body parts Armor and mechanical detail runners Weapon accessories Interchangeable hands Display stand support Decal sheet Assembly manual Specifications Brand Souling Toys Model Daytime Meteor – White Dragon Scale 1/12 Kit Type Third-party mecha musume model kit Articulation Full poseable joints Includes Armor, weapons, decals, display stand Backorder Notice:This item is currently on backorder and will be shipped once available. Please be aware that cancelling a backorder will incur a 25% restocking fee. For detailed information on our backorder and cancellation policies, please visit our FAQs page.

Introducing the latest addition to the A.T.K. Girl series: the Endless Night Vampire Camilla 1/12 Scale Model Kit. This intricately designed model kit seamlessly blends gothic aesthetics with futuristic elements, resulting in a captivating and dynamic figure. The kit features a highly articulated 1/12 scale figure of Vampire Camilla, standing approximately 6.69 inches (17 cm) tall. Crafted from high-quality ABS and PVC materials, this model offers exceptional durability and detail. The figure showcases a sharp and distinct design, incorporating elements like suspenders, stockings, and high heels. The classic red and black color scheme is complemented by silver accents with a metallic pre-spray, enhancing its visual appeal. Vampire Camilla comes equipped with an impressive array of accessories to enhance customization and display options: Dual-Body Configuration: Includes both a standard body and an armored body, allowing for versatile display options. Covenant Bat "Laura": A mechanical bat familiar equipped with autonomous AI, capable of transforming into armor for Camilla. It features both retracted and flight modes. Crimson Thorn: A versatile melee weapon that can extend a crimson energy blade from its hilt. Sin and Punishment: A pair of short daggers that inflict both physical and psychological damage upon the enemy. Cause and Effect: A set of silver blades, one long and one short, which can combine to form the double-ended scythe "Causality Reaper." Blood Effect Parts: Special effects pieces that simulate dynamic battle scenes. Interchangeable Faces: Five pre-painted facial expressions and five blank faces for customization. Hand Options: Six pairs of hands for the standard body and three pairs for the armored body, allowing for a variety of poses and weapon handling. Display Stand: A sturdy base to support dynamic poses. Decals: Eye decals, marking decals, and rhinestone stickers for added detail. Collectible Card: A character card featuring Vampire Camilla. Notably, certain parts of the kit come pre-painted, allowing for a more streamlined assembly process and a visually striking final product. The model also features an upgraded body sculpt, reflecting enhanced lines and proportions to accurately depict Camilla's alluring and enigmatic presence. Whether you're a seasoned model builder or a newcomer to the hobby, the A.T.K. Girl Endless Night Vampire Camilla kit offers an engaging and rewarding experience, culminating in a dynamic figure that's sure to be a standout in any collection.

Official Nuke Matrix Retailer LA Scale Model is an authorized retailer of Nuke Matrix All Nuke Matrix model kits are 100% genuine and sourced directly from the manufacturer. Nuke Matrix 1/12 Cyber Forest Fantasy Girls – B.A.T. Sonic Blast Attacker Maria Strauss The Nuke Matrix 1/12 Cyber Forest Fantasy Girls B.A.T. Sonic Blast Attacker Maria Strauss is a third party mecha-girl model kit combining stylish character design with mechanical components and dynamic equipment. As part of the Cyber Forest Fantasy Girls series, this kit emphasizes articulation, accessory variety, and display versatility. Product Highlights 1/12 scale mecha-girl kit from the Cyber Forest Fantasy Girls line Fully articulated body frame suitable for dynamic posing Includes sonic-themed weapon equipment and mechanical parts Winged or booster-style back equipment for aerial-style display options Color-separated runner design for clean assembly with optional painting Multiple expressive face options and interchangeable hands Includes display stand for stable posing Description Maria Strauss appears in the B.A.T. (Sonic Blast Attacker) configuration, equipped with sound- or pulse-themed armaments and mechanical attachment parts that support various attack stances. Her articulated frame enables a wide range of expressive poses, while color-separated runners ensure a visually appealing build straight from the box. The combination of character styling, mechanical wings or boosters, and unique sonic elements makes Maria Strauss a standout figure in the Cyber Forest Fantasy Girls lineup, especially for collectors who enjoy display-focused builds with personality and flair. Box Contents Maria Strauss main body parts Mechanical equipment set (B.A.T. configuration) Back-mounted wing/booster components Sonic or pulse-style weapon accessories Interchangeable hands Multiple face plates Display base and stand arm Decal sheet Instruction manual Specifications Brand Nuke Matrix Series Cyber Forest Fantasy Girls Model B.A.T. Sonic Blast Attacker: Maria Strauss Scale 1/12 Material Color-separated plastic runners Articulation Full articulated frame Accessories Weapon set, wing/booster parts, faces, hands, stand

The MS General 1/10 Seven Deadly Sins Envy model kit features an intricately designed mecha girl paired with a mechanical beast, representing the sin of Envy from the Seven Deadly Sins lineup. With striking green highlights and mechanical aesthetics, this kit offers a captivating build experience for collectors and mecha enthusiasts alike. Key Features: Scale and Materials: 1/10 scale model made from high-quality ABS and PVC materials, ensuring durability and refined detail. Height: Approximately 17cm tall when assembled, including the mecha girl and her beast companion. Accessories: Includes the main mecha girl unit, weapon parts set, Orthrus mechanical beast, throne display base, and a LED lighting kit with switch module. Design Details: Features bold mechanical design with vibrant colors, combining character aesthetics and mechanical engineering, designed for dynamic display and customization. Release Information: Scheduled for release in January 2025, the Envy set is part of the Seven Deadly Sins model kit series by MS General, continuing the brand’s tradition of high-quality original IP designs with distinctive character themes and mecha integrations. The MS General 1/10 Seven Deadly Sins Envy model kit is perfect for fans of stylized mecha girls and unique original concept builds, offering detailed craftsmanship and dynamic poseability right out of the box.

Animester x Nuclear Gold Reconstruction - Honor of Kings Sun Shangxiang Doomsday Mecha 1/12 Model Kit The Sun Shangxiang Doomsday Mecha is a 1/12 scale plastic model kit produced by Animester in collaboration with Nuclear Gold Reconstruction, based on the legendary-tier skin from Tencent's Honor of Kings (King of Glory) mobile game. The kit features a fully transformable motorcycle-to-cannon weapon system that converts without part swapping, along with three interchangeable face plates and pre-painted transparent accent parts in fluorescent green and gunmetal gray. Honor of Kings is China's highest-grossing mobile game with over 100 million daily active players, and the Doomsday Mecha skin is one of the most iconic designs in the game's history. Key Features Integrated Transformation System: The motorcycle converts directly into a cannon without removing or swapping any parts, faithfully reproducing Sun Shangxiang's in-game weapon transformation. Pre-Painted Transparent Parts: Fluorescent green and gunmetal gray accent pieces come pre-painted with good translucency, providing a mechanical aesthetic straight out of the box. Three Interchangeable Face Plates: Includes three expression options plus a blank face plate for custom expressions via the included decal sheet. Matte Finish Body: The main body features an overall matte texture with color-separated runners for the figure and motorcycle components. Motorcycle Riding Articulation: An additional leg articulation point is designed specifically for natural motorcycle riding and kneeling poses. Snap-Fit Assembly: Color-separated components with snap-fit construction - no cement required. Builder Context This is an intermediate-level snap-fit kit that does not require pin cutting or hole widening, though some small bow-tie style connectors can be fiddly during assembly. The build complexity and articulation are comparable to a Bandai RG kit, with pre-painted transparent parts reducing the need for painting to achieve a display-ready result. Builders familiar with Animester's other Nuclear Gold Reconstruction kits should note that hand part quality has been improved over the White Dragon Knight Galahad release. Why Build This Kit The Animester Sun Shangxiang Doomsday Mecha is currently the only licensed 1/12 scale model kit based on Honor of Kings, one of the world's most-played mobile games. The integrated motorcycle-to-cannon transformation is the kit's standout feature - most mecha kits with vehicle accessories require part swapping, but this system converts entirely through reconfiguration, making it a genuine engineering showcase at the 1/12 scale. At approximately 17 cm tall, the finished figure has similar shelf presence to a Bandai RG Gundam kit but offers a distinctly different aesthetic rooted in Chinese game design rather than Japanese mecha traditions. Builders should be aware that the cannon is too heavy for two-handed standing poses without a support stand, and the motorcycle wheels may benefit from a small amount of lubricant for smoother rolling. This kit is a strong choice for builders who want a video game-licensed mecha musume kit with real transformation engineering rather than static display parts. Box Contents Sun Shangxiang figure parts (color-separated runners) Transformable motorcycle/cannon weapon unit 3 interchangeable face plates 1 blank face plate Multiple hand parts Decal sheet Assembly instructions Specifications Series Honor of Kings (King of Glory) Character Sun Shangxiang - Doomsday Mecha Manufacturer Animester x Nuclear Gold Reconstruction Scale 1/12 Height Approx. 17 cm (6.7 in) Materials ABS, PC, PVC, POM Assembly Snap-fit, color-separated Product Code ANT81008 Country of Origin China

Soskill Hatsune Miku Series Sakura Express Model Kit Celebrate the charm of Hatsune Miku with the stunning Sakura Express model kit, a blend of sweet, dynamic, and creative elements. This special edition "Sakura Express" transforms Hatsune Miku into a multifaceted character, featuring three distinct modes: Basic Outfit: A delightful design inspired by cherry blossoms and pink hues. The twin tails are adorned with adorable cherry-shaped accessories. Courier Outfit: Equipped with a wind-resistant hood for vehicle use, this look reveals Miku's "sweet and cool" side. The set includes a delivery box and tape dispenser, perfect for a gold-standard courier delivering mystery packages. Stage Outfit: As a performer, Miku’s exclusive stage attire pairs beautifully with a sakura guitar and drone for a vibrant musical journey. This kit also includes four pre-painted facial expressions, water decals for customizable emotions, and six blank faces for even more personalization. Exciting Features: Motorcycle and Sidecar: Miku's vehicle comes in a harmonious pink-and-white color scheme. The design strikes a balance between sleek motion and soft, sweet aesthetics. The bike includes a detachable sidecar that transforms into an independent robot. Drone Integration: The drone robot features articulated arms capable of gripping the delivery box, perfect for reaching high-rise recipients. Light-Up Headlamp: The motorcycle headlight lights up via a unique activation feature where the drone gently touches the front panel to replenish energy. Functional Accessories: Slots on the sidecar allow storage for drones or delivery boxes, adding practicality to this detailed set. Special Bonus:The first production run includes an exclusive Sakura Miku photocard. Capture her beauty in all its cherry-blossom splendor! Specifications: Figure Height: Sakura Miku approx. 16 cm Motorcycle Dimensions: Approx. 19.5 cm x 13 cm x 10 cm (including the sidecar) Materials: ABS, PVC, PE, TPE, LED, magnets, paper Contents: Sakura Miku figure, interchangeable parts for outfits, various accessories, motorcycle, sidecar, drone, water decals, and a light-up unit with batteries Release Date: Q1 2025 This delightful kit is a must-have for fans and collectors who want to bring the dynamic world of Sakura Miku to life.

Overview The Animester x Nuclear Gold Reconstruction 1/12 White Dragon Knight Galahad is the first entry in the Twelve Knights of the Round Table original mecha musume plastic model series. Designed by artist 唐璜Zzz, Galahad features a white dragon-themed knight aesthetic with interchangeable armor configurations, allowing display in both armored White Dragon mode and unarmored Knight mode. Animester is a Chinese manufacturer specializing in mecha musume kits, and this collaboration with Nuclear Gold Reconstruction marks their entry into original-IP Arthurian fantasy designs at 1/12 scale. Key Features Dual Display Modes: Kit includes enough parts to build both the armored White Dragon form (17 cm) and the unarmored base body form (15 cm) simultaneously, functioning as two complete display pieces from a single box. Five Interchangeable Faces: Four pre-printed expression faceplates plus four blank faces for custom painting, offering extensive character display options. Fabric Cloak: Real fabric cape elements are included alongside hard plastic components for a mixed-media display aesthetic. Color-Separated Runners with Pre-Painted Parts: Runners include molded color separation in white, clear blue, and plated gold accents, with select parts pre-painted for visual impact out of the box. First-Batch Bonus Wing Effect Parts: Initial production units include phantom-painted wing effect parts as a limited bonus. Later production runs do not include this accessory. Full Articulation: Poseable joints throughout the body allow dynamic display poses, though the armored form prioritizes appearance over extreme articulation range. Builder Context This kit is suited for intermediate to advanced builders. The ABS armor parts, plated gold runner, and tight-tolerance joints require careful cleanup - builders should expect to sand pegs, drill out joints, and glue select parts for a secure fit. The build is notably longer than average for a 1/12 mecha musume kit. Cement, a pin vise, and fine-grit sandpaper are recommended alongside standard nippers and hobby knife. Builders familiar with Kotobukiya Frame Arms Girl or Bandai 30MS kits should be aware that Galahad's engineering is less forgiving, closer in difficulty to a resin conversion kit than a standard snap-fit model. Why Build This Kit The Animester White Dragon Knight Galahad is one of the few mecha musume model kits built around an Arthurian fantasy theme rather than the sci-fi or military aesthetics that dominate the category from Kotobukiya, Bandai, and most Chinese manufacturers. The inclusion of enough parts to build both armored and unarmored configurations simultaneously means builders effectively get two display pieces from one box, which is uncommon at the $55-70 price point. At 17 cm in armored mode, Galahad has strong shelf presence and the plated gold accents and clear blue armor give the finished build a premium look without paint. However, builders should be aware that Galahad's engineering quality is inconsistent across runners - some parts have clean gate placement while others require significant cleanup, and the armored leg assembly in particular has known fit issues that require patience and glue. This kit is best suited for builders who enjoy the cleanup and modification process as part of the hobby rather than those looking for a clean snap-fit experience. Box Contents Main body pieces x 2 (armored and unarmored builds) White Dragon form arm armor x 1 pair Knight form arm armor x 1 pair White Dragon form leg armor x 1 pair Knight form leg armor x 1 pair Removable face shield x 1 Interchangeable face parts x 4 Blank face parts x 4 Replacement hand parts x 4 sets Sword x 1 Backpack x 1 Fabric cape x 1 pair Foot effect parts x 1 pair Wing effect parts x 1 pair (first-batch bonus only) Water slide decals x 1 sheet Display stand x 1 Brand Animester x Nuclear Gold Reconstruction Series Twelve Knights of the Round Table Character White Dragon Knight Galahad Designer 唐璜Zzz Scale 1/12 Height Approx. 17 cm (armored) / 15 cm (unarmored) Materials ABS, PVC, Fabric Product Type Plastic model kit (assembly required) Product Code ANT81007 JAN Code 6976881810073 Country of Origin China Release Date October 2024

Eastern Model A.T.K. Girl Eternal Daylight Ling Wang Xingshi (Awakened Lion) 1/12 Scale Model Kit The Eastern Model EM2024002 A.T.K. Girl Ling Wang Xingshi (Awakened Lion) is a 1/12 scale mecha girl plastic model kit from the Eternal Daylight series. Inspired by traditional Chinese Southern Lion dance culture - specifically the red lion associated with Guan Yu - the design fuses lion dance motifs with mecha girl aesthetics across a dual-body system featuring both a basic figure body and a fully armed mecha body. Eastern Model's A.T.K. Girl line is one of the most established mecha musume (mecha girl) model kit series from a Chinese manufacturer, with over 16 entries spanning mythology, military, and cultural themes. Key Features Dual-Body System: Includes a basic figure body with brown hair and an armed mecha body with white hair. Hair parts are interchangeable between both bodies. LED-Equipped Dance Hammer: The signature weapon features a built-in vibration-activated LED light set. Tapping the hammer head activates the light effect, which auto-shuts off after 12 seconds. Requires 3x LR621 batteries (not included). Four Pre-Printed Face Plates: Tampo-printed expressions include Mischievous, Star, Shouting, and Crying. Four additional blank face plates are included for custom decoration using provided eye decals. Movable Lion Giant Hand: The armed mode lion claw features rotatable eyeballs for expressive, humorous posing. Interchangeable Chest Armor: Red and transparent orange chest armor options allow color customization. Extensive Hand Options: 3 pairs for the basic body and 7 pairs for the armed body, covering a wide range of lion dance poses. Poseable Fabric Scarf: Includes a wire-core fabric scarf for dynamic, customizable positioning. Builder Context The A.T.K. Girl Awakened Lion is a snap-fit plastic model kit that builds without cement or glue. Pre-sprayed metallic silver and gold accents and tampo-printed face plates reduce the need for painting, though builders who want to refine color separation or add weathering will find plenty of surface detail to work with. The build complexity is intermediate - comparable to a Bandai RG kit in terms of part count and articulation engineering, though tolerances on Eastern Model kits can vary more than Bandai. Builders familiar with Kotobukiya Megami Device or Frame Arms Girl kits will find the dual-body format and accessory density familiar. Why Build This Kit The Eastern Model A.T.K. Girl Ling Wang Xingshi (Awakened Lion) is one of the few mecha girl model kits built around a specific cultural theme rather than a generic military or fantasy concept, which gives the finished build a distinctive shelf presence that stands apart from other 1/12 mecha musume kits. The LED-equipped Dance Hammer is a functional accessory rarely seen at this scale and price point - the vibration-activated light effect adds display value without requiring soldering or wiring by the builder. At approximately 16.5 cm, the armed configuration has comparable height and visual density to other recent A.T.K. Girl releases like the Fenrir and Frankenstein, but the lion dance color scheme (red, white, black with metallic gold and silver accents) makes it immediately recognizable in a lineup. Builders should note that the kit requires 3x LR621 batteries for the LED feature, which are not included and are a less common button cell size. For collectors exploring the A.T.K. Girl line for the first time, the Awakened Lion is a strong mid-series entry point - it uses Eastern Model's newer highly articulated body and avoids some of the tight-tolerance issues reported on earlier entries like the Arachne 2.0. Box Contents Basic figure body components Armed mecha body components Dance Hammer with vibrating LED light module Lion giant hand with movable eyeballs Red and transparent orange chest armor parts PVC front and back red skirt parts Poseable fabric scarf with wire core Cat paw accessories (basic body) 3 pairs of hands (basic body) 7 pairs of hands (armed body) 4 pre-printed face plates (Mischievous, Star, Shouting, Crying) 4 blank face plates Eye decals Marking decals Display base Collector's card Instruction manual Specifications Brand Eastern Model (E-Model) Series A.T.K. Girl - Eternal Daylight Model Number EM2024002 Character Ling Wang Xingshi (岭王醒狮 / Awakened Lion) Scale 1/12 Height Approx. 16.5 cm Materials ABS, PVC, Electronic Components Battery Requirement 3x LR621 (not included) EAN 6971835800742 Product Type Plastic assembly model kit Backorder Notice:This item is currently on backorder and will be shipped once available. Please be aware that cancelling a backorder will incur a 25% restocking fee. For detailed information on our backorder and cancellation policies, please visit our FAQs page.

Official Nuke Matrix Retailer LA Scale Model is an authorized retailer of Nuke Matrix All Nuke Matrix model kits are 100% genuine and sourced directly from the manufacturer. Nuke Matrix 1/12 Cyber Forest Fantasy Girls – Mad Wolf: Carolina Rolphe The Nuke Matrix 1/12 Mad Wolf Carolina Rolphe is a third-party mecha-girl model kit blending stylized character design with mechanical build detail. At 1/12 scale and standing approximately 16 cm tall, this kit delivers a striking figure for collectors seeking a compact but detailed build. Product Highlights 1/12 scale mecha-girl model kit from Nuke Matrix’s Cyber Forest Fantasy Girls line Height approx. 16 cm when assembled Constructed from ABS and PVC materials Fully articulated build suitable for dynamic posing and display Color-separated plastic parts for a clean build without painting (optional painting enhances detail) Mecha-girl styling that combines character appeal with mechanical design Box Contents Carolina Rolphe main body parts Accessories and mechanical parts (as per standard Mad Wolf kit configuration) Decal / sticker sheet Instruction manual Description Carolina Rolphe’s Mad Wolf kit captures the feral aesthetic of the “Mad Wolf” archetype while maintaining the flexibility and customization common to third-party mecha-girl model kits. With clean part separation and solid articulation, this kit is suitable both for display and for further customization or painting. Whether built as-is or customized, this kit offers a balance of mecha-girl character styling and mechanical structure, making it a versatile foundation for any collection that includes original-IP or third-party mecha kits. Specifications Brand Nuke Matrix Series Cyber Forest Fantasy Girls Model Mad Wolf: Carolina Rolphe Scale 1/12 Height Approx. 16 cm Material ABS, PVC Kit Type Third-party mecha-girl model kit Backorder Notice:This item is currently on backorder and will be shipped once available. Please be aware that cancelling a backorder will incur a 25% restocking fee. For detailed information on our backorder and cancellation policies, please visit our FAQs page.