Gundam Gunpla

The YMS-15 Gyan is a mobile suit that appears in the TV anime Mobile Suit Gundam. The YMS-15 Gyan was developed by the Zimmad company in the late stages of the One Year War for the Principality of Zeon's second phase main mobile suit development project. It was designed with exceptional close combat ability in anticipation of melee combat against the Earth Federation's mobile suits. When needed, the Gyan can receive fire support from the MS-09B Doms or MS-09R Rick Doms. However, its focus on close combat resulted in lower versatility and this contributed to its loss to the Zeonic's MS-14 Gelgoog.A Gyan (depending on sources, this is either the sole unit produced or one of three produced units) was later customized for use by Colonel M'Quve of the Mobile Assault Force. A powerful beam saber serves as Gyan's primary weapon, it also has a shield with 60 needle missiles and 25 hide bombs (space mines) for laying traps. The appearance of the Gyan, with its silver armor and Pickelhaube helmet design, has a strong resemblance to a medieval armored knight. This is further emphasized by M'Quve's fighting style, which is heavily based on fencing.

The MSN-04 Sazabi is a mobile suit introduced in Mobile Suit Gundam: Char's Counterattack. It is piloted by Char Aznable. After Char Aznable returned as the leader of his own Neo Zeon faction in U.C. 0093, he ordered his engineers to create a new mobile suit that would fit his piloting skills and Newtype powers. The result was the MSN-04 Sazabi, which was later built by the Luna-based contractor Anaheim Electronics. With an overall height of 25.6 meters, the Sazabi is much bigger than most standard mobile suits, but thanks to the use of lightweight armor materials and a great number of thrusters it is much faster and more maneuverable than other suits. The suit is armed with an abdomen-mounted scattering mega particle cannon, a beam shot rifle, a pair of beam sabers stored in the arms, and a shield with three missiles as well as a beam tomahawk.Because Char is a Newtype, the Sazabi was also equipped with six funnels which the pilot could control through his psycowaves via a Psycommu system. The Sazabi was also the first MS to be equipped with the revolutionary new psycho frame cockpit. This system featured microscopic psycommu receiver circuits installed throughout a mobile suit's internal frame and cockpit walls. These tiny circuits amplify and transmit a Newtype pilot's psycowaves, enabling the mobile suit to respond instantaneously to mental commands.

The MSΖ-006 Zeta Gundam (MSΖ-006 Ζゼータ ガンダム?) is the titular mobile suit of the Mobile Suit Zeta Gundam television series and also featured in the Mobile Suit Gundam ZZ television series. It was piloted by one of its designers, Kamille Bidan, during the Gryps Conflict [3][4], and then Judau Ashta in the First Neo Zeon War. The Zeta Gundam is a high-performance, next-generation MS constructed by Anaheim Electronics in partnership with the AEUG as part of the "Project Zeta". This project aimed to develop a transformable mobile suit capable of operating in space and on earth, but it stagnated due to problems with the strength of the movable frame. Progress was later made when Anaheim Electronics studied the movable frame of the RX-178 Gundam Mk-II units stolen by AEUG from the Titans.The main feature of the Zeta Gundam is its ability to instantly transform into a streamlined Waverider mode, which can fly at high speed in space as well as in the atmosphere. The Zeta Gundam can also function as a sub-flight system in this mode, carrying another mobile suit on its top surface. Furthermore, this mode also allows the Zeta Gundam to ride the shockwaves of atmospheric re-entry, thus it can enter the atmosphere without the use of the Ballute System, a bowl-shaped balloon parachute that protects a mobile suit from the friction heat of atmospheric entry. This atmospheric re-entry capability is thanks to the incorporation of the Flying Armor into the mobile suit's back (bottom in waverider mode), which is developed using the data of the Gundam Mk-II's FXA-00 Flying Armor.The Zeta Gundam is armored with the new lightweight Gundarium Gamma alloy, and has a variety of weaponry that includes two head-mounted vulcan guns, two beam sabers stored in the side armor that function as beam guns in Waverider mode, two forearm-mounted grenade launchers, a beam rifle with retractable barrel, and a shield. When higher firepower is required, it can use the powerful hyper mega launcher. The Zeta Gundam is also one of the first mobile suit to use the Bio-Sensor, a variant of the Psycommu system that allows a Newtype pilot to more easily interface with his mobile suit via mental commands.The Zeta Gundam is said to have received various upgrades from its initial model, such as the Initial Model + Wave Shooter, mid-model (major upgrade done in December UC 0087, most notable change being the rear skirt thrusters and addition of forearm grenade hatches) and the late model (final upgrade made in March UC 0088 consisting of Zeta Plus parts).

The RX-93-ν2 Hi-ν Gundam (pronounced "High-New") is an alternate interpretation of the RX-93 ν Gundam which appears in Mobile Suit Gundam: Beltorchika's Children. It is piloted by Amuro Ray. Originally developed in the Anaheim Electronics facility near Von Braun, the Hi-Nu Gundam's basic design was an update of past Gundam Type mobile suits, returning to the basics of Federation-made mobile suits and going against the trend of larger and more complex mobile suit designs at the time. Its most notable feature was a set of six all-range weapons mounted on its back, known as "Fin Funnels", which were capable of both attack and defense. This made it the first full spec Newtype-use Gundam type mobile suit.The Hi-Nu Gundam also featured a Psycommu system designed by its main pilot and engineer, Amuro Ray. Originally, the system only served as the control mechanism for the Fin Funnels. However, after the Londo Bell captured a MSN-03-2 Psycho Doga used by Neo Zeon, the Psycho-Frame technology obtained from it was incorporated into the Hi-Nu Gundam, improving its responsiveness via brainwave controls.Other than the Fin Funnels, the Hi-Nu Gundam was also armed with a pair of head-mounted vulcan guns and an arsenal of custom-made weapons: a beam rifle, a new hyper bazooka, three beam sabers (one on each back-mounted funnel rack, one inside a saber rack in the left forearm), a machine gun mounted in the right forearm, and a shield with built-in ranged weaponry. The Hi-Nu Gundam was completed within three months, this was the result of the maturation of movable frame technology, the tireless effort of engineers, as well as Amuro's own deep understanding of mobile suits.

The RGM-79SP GM Sniper II (ジム・スナイパーII Jimu sunaipā II?) is a variant of the RGM-79G GM Command and first appeared in Mobile Suit Gundam 0080: War in the Pocket. Based on the GM Command series and the concept of the RGM-79SC GM Sniper Custom deployed earlier in the war, the GM Sniper II is a high-performance machine capable of using specialized weaponry at maximum capacity for ultra-long-range engagements. It was the last and most advanced of the Federation's line of GM Sniper mobile suits during the One Year War. It was also one of the last GM-type units to be developed during the war.The GM Sniper II's specialized head visor has built-in compound sensors with specialized laser sensors, powerful zoom cameras, and image stabilizers for precision, and long-range targeting. During operation, goggles cover the main camera and other elements of the head sensor array, and together with head unit coolers, they physically eliminate noise interference and enhance long-range sniping capabilities. The suit is one of the few capable of accurately firing MS-sized sniper rifles that used physical projectiles. Unlike beam weapons, these rifles are not affected by magnetic forces or solar winds, but only a few were made.Operationally, the GM Sniper II was used to eliminate priority targets such as base ships and command machines from beyond the range of conventional weapons. However, the suit is not just a long-range specialist. Like the highly regarded GM Sniper Custom deployed earlier, the GM Sniper II maintains versatility while having enhanced performance. It has sufficient specifications for mid-range support and close combat and can use almost any existing MS armament. In terms of overall performance, it was one of the few machines to match the RX-78-2 Gundam, which was the standard against which other Federation suits were held to. In fact, its specifications on paper were superior to the Gundam's, and it was one of the few Federation production suits that could take on the MS-14A Gelgoog in a one-on-one fight.The armor of the GM Sniper II is reinforced with pieces of Luna Titanium alloy, and mobility is improved via sub-thrusters in various locations and a total of six large vernier thrusters – two in the backpack and four on the legs. The four large vernier thrusters in the legs have high output to make up for the shortfall in the output of the backpack thrusters, which are designed for precision, and boast superb pitching performance (rapid up and down movements). The suit's main verniers are built along the machine's core axis, an arrangement also used in later MS such as the MSA-003 Nemo and RGM-89 Jegan. This is an effective way to boost mobility while maintaining the same basic silhouette. The suit's torso is an upgraded version of the GM Command's and has superior specifications with additional waste heat and electrical noise suppression material. Its arms are constructed with the same parts used in other GM models, but with highly tuned servos and actuators and an updated driver.Only very few GM Sniper II were manufactured due to it being developed late in the war. Production costs were also undeniably higher than standard mass-produced machines, and apart from a few prototypes built for test purposes, the suit did not have any follow-up models. It is believed that the GM Sniper II's development team later worked on the Nemo, but this is unconfirmed. Due to the GM Sniper II's excellent performance and shooting capabilities, it continued to be used for sniping missions long after the war ended. Units deployed by the Titans have a dark blue color scheme and updated features such as a new optical camera system for long-range shooting and improved sensor radius.

The RX-78GP03S Gundam "Stamen" (Development codename: Dendrobium Stamen) is a mobile suit that serves as the core unit for the RX-78GP03 Gundam "Dendrobium". It was first seen in Mobile Suit Gundam 0083: Stardust Memory OVA and was piloted by Kou Uraki. The RX-78GP03S Gundam Stamen is one of two components that make up the RX-78GP03 Gundam "Dendrobium", with the other being the armed base Orchis. The Stamen serves as the control unit for the Gundam "Dendrobium" and can operate on its own when required. The suit has two beam sabers, a folding shield, and a beam rifle as standard armament, and can optionally use folding bazookas. The traditional twin-head Vulcans were removed, with the freed space used to install more advanced avionics and sensor systems.The "Stamen" was designed with two cockpit options: a Core Block System, and a spherical cockpit with linear seat and panoramic monitors that gives its pilot a full view of the battlefield that was first used in the RX-78NT-1 Gundam "Alex". In the end, the spherical cockpit was selected as the default as it provided superior fire control capabilities. This is of particular importance as when the Stamen is docked with the "Orchis", it must be able to efficiently control and use the large amounts of weapons stored in the "Orchis". Another unique feature of the "Stamen" is the tail binders mounted on the sides of the waist for increased maneuverability and to dock with the Orchis. Lastly, a set of foldable manipulator arms used to retrieve weapons from the Orchis' weapon containers were concealed in the forearms of the GP03S.

The MBF-P02 Gundam Astray Red Frame is a Mobile Suit in the Gundam SEED Astray series of manga, novels, and photonovel. It is operated by Junk Guild member Lowe Guele. The MBF-P02 Gundam Astray Red Frame is one of five identical prototype mobile suits developed by Orb using stolen data from the Earth Alliance's G Project. Its original concept was to be an MS that could be piloted by Naturals, and it was eventually loaded with an incomplete Natural-use OS. Most of the technology from the G Project is successfully copied with the exception of Phase Shift armor. In its place, the Gundam Astrays' designers made the machines out of a lighter foam metal compound, with minimal armor over the frame. This made the mobile suits lighter and faster than their G Project counterparts. All five prototype Gundam Astrays are also designed with a backpack that can be lowered to the back skirt armor, allowing the mounting of additional equipment on the back.

The XXXG-01W Wing Gundam (aka Gundam Zero-One) is the titular mobile suit of the Mobile Suit Gundam Wing series. The unit was primarily piloted by Heero Yuy.Out of the five original Gundams created for Operation Meteor, Wing Gundam is the most well-balanced in terms of abilities and bears the closest resemblance to their common ancestor: the XXXG-00W0 Wing Gundam Zero. Similar to Wing Zero, the Wing Gundam can transform into an alternate flight form known as "Bird Mode" and has a powerful Buster Rifle as part of its armaments. However, the "ZERO System" interface (which had technical problems) and other parts considered to be excessive were not included, and the skills of the pilot are needed to make up for the shortfall.The major contributor to Wing's mobility is the pair of wing units on the backpack. These units not only generate lift but can also change the aerodynamic characteristics of the mobile suit through the movements of their individual panels, supporting a range of speeds from stall to hypersonic. Even in outer space, the wing units exhibit high attitude control capability using both AMBAC and built-in vernier thrusters. By transforming into Bird Mode, Wing's mobility and movement range are increased further, allowing it to conduct operations that other Gundams could not. The leg thrusters on the back of the knees serve as the main verniers in Bird Mode and are also used for dashing on the ground in MS mode.The Wing Gundam EW is Hajime Katoki's redesign of Wing created after the release of the Gundam Wing sequel OVA/movie Endless Waltz, which has been featured in the Glory of the Losers manga re-telling of the series (among other works). The redesigned Wing retains largely the same armament and abilities, but resembles Wing Zero in appearance even more than before and can be equipped with extra energy cartridges to enable the Buster Rifle to fire a maximum of nine shots instead of three.

The GAT-X370 Raider Gundam is a transformable Mobile Suit introduced in the series Mobile Suit Gundam SEED and is piloted by "Biological CPU" Clotho Buer.The Raider is a transformable mobile suit and the only second generation GAT-X machine to adopt the X300-series frame used by the GAT-X303 Aegis Gundam. Compared to the Aegis, Raider has improved anti-mobile suit capabilities when in MA mode and its transformation system is greatly simplified. It is actually a variant of the GAT-333 Raider Full Spec and maintains some of its predecessor's characteristics, like a MA mode specialized for flight and the two large fighter plane-like main wings that give it full atmospheric flight capabilities. These wings also boost Raider's turning capabilities and acceleration speed on earth and in space, as well as allow it to serve as a subflight lifter unit for carrying other mobile suits (usually the GAT-X131 Calamity Gundam). During battles, Raider often utilizes hit-and-run attacks and has Trans-Phase armor like the other second generation machines. The Raider is armed with both energy and shell-firing weapons (with some of them being usable only in flight mode) and uses the "Mjolnir" Spherical Breaker, a wire tethered mace, as its handheld weapon.

The ZGMF-X10A Freedom Gundam (aka Freedom, X10A) is a mobile suit introduced in the anime Mobile Suit Gundam SEED and piloted by Kira Yamato.One of ZAFT's ZGMF-X series of Gundam units build in C.E. 71 using technology derived from the four captured Alliance's Gundam, the Freedom Gundam has Phase Shift Armor and its armaments include CIWS guns, beam sabers, shield, plasma beam cannons, railguns, and a beam rifle. When the latter three weapons are used simultaneously, the Freedom is said to be in 'Full Burst Mode'. The suit has full flight capabilities in the atmosphere and the back-mounted wings can be deployed in "High Mobility Aerial Tactics (HiMAT) Mode" to enhance its mobility in the atmosphere or in space. It also has an advanced targeting system, the Multi Lock-On System, that allows it to target and fire at multiple enemy units simultaneously. Due to its capabilities and loadout, the suit has a reputation as a specialized 'Mobile Suit Killer', but its high performance resulted in a complicated control system that demands extremely fast reaction speed and spatial awareness from its pilot.When required, the Freedom Gundam can dock with a support unit, the METEOR unit, for heavier firepower and greater speed. The Freedom Gundam has virtually unlimited combat endurance as it is equipped with a Neutron Jammer Canceller and powered by a nuclear reactor. Kira describes the suit as having over four times the power of the GAT-X105 Strike Gundam. However, what this exactly means is unclear. The Freedom Gundam is meant to operate alongside the ZGMF-X09A Justice Gundam, and they are often based on the warship, the FFMH-Y101 Eternal, which is designed specifically to maintain them. Even in CE 73, the suit is still considered by some people, such as Shinn Asuka, as the most powerful mobile suit out there. Overall, it is one of Clyne Faction's symbols of power, along with the Eternal, the Archangel, and the Justice.

The GN-001 Gundam Exia (aka Exia, Gundam Seven Swords) is a mobile suit featured in season one of Mobile Suit Gundam 00 and is piloted by Setsuna F. Seiei.Specializing in close combat and armed mainly with melee weapons, the Gundam Exia is one of four Gundams deployed in AD 2307 by the paramilitary organization, Celestial Being, to eliminate world conflicts through armed interventions. To fight against the world with their small numbers and win, these Gundams have overwhelming power and equipped with advanced technology a century ahead of its time. Notably, the semi-perpetual GN Drive mounted in the center of the Gundams provide almost limitless energy and generates special, multifunctional GN Particles. The GN Particles grant outstanding mobility, including independent flight capabilities, and are also utilized for beam weaponry, attitude control, and stealth purposes as the discharged particles can cause electromagnetic interference, leaving conventional communication and radar devices useless. The Gundams also share common aspects with conventional mobile suits, such as the use of E-Carbon for its armor material. However, the Gundams' E-Carbon has higher defensive power due to the use of advanced materials.An example of Exia's overwhelming power is that its output was estimated to be about six times that of the SVMS-01 Union Flag, one of the newest conventional mobile suits at the time. The technical hurdles that had to be overcome to create the powerful Gundams and their GN Drives were high, making their production extremely difficult and caused the Gundams' development to occur in phases. The first generation machine, the GN-000 0 Gundam, established the basic system of a mobile suit powered by a GN Drive, and armed with a beam gun and beam saber. Subsequently, four second generation machines were developed with individual capabilities required for armed intervention, and their data served as a basis for the third generation machines, which included Exia and the other three Gundams deployed in the armed interventions. Specifically, Exia was developed from the GNY-001 Gundam Astraea, a general-purpose mobile suit with human-like movability that was used for testing various weapons, and the two machines have a number of similarities in terms of appearance.The Astraea's movability aspect is particularly appropriate for the Exia, which requires the same range of articulations as the human body due to its close combat specialization. Thus, while the Exia is armed mainly with melee weapons, its basic performance remains that of a general-purpose mobile suit. In fact, Exia is the only Gundam deployed for the armed intervention that has a body structure capable of range of articulations like the human body's, and the omission of such a structure in the other three Gundams is simply because they do not require it as their specialization is in other areas. To achieve its wide range of articulations, Exia has the most complex basic frame out of the four Gundams, its armor is also more minutely segmentalized as well. This armor design however causes some internal structures and the joints to be unprotected during certain poses, lowering Exia's defensive capability. On the other hand, this design does provides better mobility, giving Exia the best projectile evasion capability among the four Gundams.The Exia also has finer attitude control capabilities than the other Gundams, which is beneficial for close combat, and this is related to its GN Cables. The GN Cables, also known as “GN Power Lines”, are the light purple-colored cables running through various parts of the Exia's body and also one of its eye-catching visual features. While these cables are also found on other Gundams, the ones extending from the shoulders to the upper arms are unique to Exia. The cables facilitate the supply of tremendous amount of GN Particles, and thus energy, to each part of the Gundam instantaneously. They are also used for attitude control due to the GN Particles' mass reduction effect, and so, the Exia which has more cables on its exterior than the other Gundams is able to achieve finer control. In terms of defense however, such placements are dangerous, and later in GN-001REII Gundam Exia Repair II, the cables become mostly stowed in the armor.The GN Particles' mass reduction effect also lightens the Gundam, and can be used to alter the mass ratio of various body parts. Due to this latter ability, it is possible to freely control the machine's inertia and turning capabilities when in the air, and for Active Mass Balance Auto-Control (AMBAC) when in space. This also eliminates the need for the legs to "walk” when moving. As for the control of GN Particles, it is largely carried out by the two clavicle antennas on the Gundam's torso. A minor role is played by the third generation Gundams' head antenna, which is experimentally equipped with particle control functions. The head antenna also has communications and radar search functions, as well as the black box for quantum communication linkage with Veda (the Celestial Being's quantum computing system). The rest of the Gundams' humanoid head unit also contain systems responsible for controlling the entire body, much like a human's head. On a side note, the Exia's head is designed to look like the helmet of the pilot suit worn by the Gundam Meisters in AD 2307-2308 to express the belief of “Meister = Gundam”.While the GN Drive can produce GN Particles endlessly, even when the Gundams are inactive, there is a limit to the amount that could be instantaneously produced. Thus, continuous or heavy usage of beam weapons and other GN Particles consuming systems might cause the Gundams to run out of particles. To avoid this, the Gundams have GN Condensers in various body parts to store excess GN Particles. For maintenance purposes, the condensers can display the particles' compression rate and the amount stored. During mission, this display function is used for transmitting coded messages to allied units. On the matter of GN Drives, Celestial Being only created five units as that was deemed to be the minimum needed for armed interventions. The low number is not only due to difficulties in manufacturing the GN Drive, which requires Jupiter's high gravity environment, but also because having more GN Drives would increase the risk of them falling into the enemy's hands.The Gundam Exia is nicknamed “Gundam Seven Swords” as its development code was “Seven Swords”, and as indicated by this name, it is equipped with a total of seven blades to meet the needs of the moment during combat. Of these seven, the GN Sword, GN Long Blade, GN Short Blade are physical blades, while the rest are beam-based and consisted of two GN Beam Sabers and two GN Beam Daggers. The GN Sword serves as the primary weapon and due to its low energy consumption, the Exia has an advantage in prolonged combat, which mainly occurs when fighting ace pilots or when subjected to traps such as the three major bloc's joint military exercise. The three physical blades also serve as countermeasures against GN Field, a protective barrier made of GN Particles. In other words, Exia is also intended to fight against Gundam/GN Drive-equipped machine that is piloted by a betrayer or captured by the enemy and used against Celestial Being. Early on, an alternate configuration of the GN-005 Gundam Virtue also had an anti-betrayer role, but its design was dropped and this increased the responsibilities placed on Exia and its Gundam Meister.Other armaments include a GN Shield for defense that also provides protection to the internal structures and joints that might be exposed during movements. The GN Shield is usually in a compact size to maintain Exia's range of articulations, but can expand to increase the defensive area when needed. Similarly, the GN Sword, can fold its blade and has a Rifle Mode for ranged combat. The last of Exia's armament is another ranged weapon in the form of a pair of low-power GN Vulcans mounted in the forearms. During battles, the Exia gloriously sliced through its opponents in close combat, leaving a powerful impression on those who witnessed it and contributing greatly to the instillment of a "fear of Gundams" in the world. This was already anticipated by Celestial Being, and it is because of this that the organization's tactical forecaster, Sumeragi Lee Noriega, selected the Exia to intervene in the AEU-09 AEU Enact's presentation ceremony, which became the unveiling of the paramilitary organization.The Gundam Exia has an "Over Boost Mode" that temporarily boosts its GN Drive's performance and thus increase the mobile suit's capabilities. During an emergency, the Exia can activate a special "Trans-Am System" that enhances its thrust and defensive capabilities, as well as increase its output to three times that of its normal specifications for a limited period of time. This system also causes the Gundam to glow red, but it is a double-edged sword as Exia's performance will drop dramatically once it ends. A number of additional optional equipment was also developed for Exia, such as the high mobility Avalanche Unit and the GNR-001E GN Arms Type-E support machine. When equipped with the Avalanche Unit, the Exia becomes the GN-001/hs-A01 Gundam Avalanche Exia and can speed past specialized high-speed mobile suits, which it normally cannot do despite having remarkable mobility. When docked with the GN Arms Type-E, the Exia becomes the GN-001+GNR-001E GN Armor Type-E, obtaining better mobility, offensive and defensive capabilities.

The RX-0 Unicorn Gundam 02 Banshee (aka Banshee) is a mobile suit that appears in Mobile Suit Gundam Unicorn. It is built alongside its brother unit, the RX-0 Unicorn Gundam, under the Earth Federation's UC Project. Originally piloted by Marida Cruz, it was later assigned to Riddhe Marcenas.After its completion alongside the Unicorn Gundam, the Banshee was eventually stationed on Earth with the Augusta Research Lab and tested for atmospheric combat. Rather than that of a Unicorn, the Banshee's motif is that of a lion, illustrated with gold accents on the forehead, a golden collar to signify a lion's mane (the Banshee originally had the same collar as the Unicorn but this was changed after it suffered damages while battling in space), and a much more elaborate horn/V-fin.The Banshee's armor is almost entirely black, and its psycho-frame emits a golden-orange glow when the NT-D is activated. Although the Banshee lacks the Unicorn's distinctive La+ System, its performance in atmospheric combat is vastly superior, presumably because of a significant reconfiguring of the suit's operating system to account for Earth's gravity and the atmosphere's frictional resistance.Combat improvements were made according to Unicorn Gundam's battle data, which had been relayed to the Augusta Research Lab. However, the two Gundams have no major operating differences. Aside from lacking the Unicorn's La+ operating system, the Banshee's raw performance is equal to that of the Unicorn. In other words, any modification to the Banshee (i.e. atmospheric combat performance) could also be applied to the Unicorn, making both suits equal in ability.In the anime version, it weighs more than Unit 1 and has a larger effective sensor radius. Its armament also differs from that of Unit 1, as it is equipped with the added psycho-frame armaments "Armed Armor BS" and "Armed Armor VN", granting it better continuous battle capability than Unit 1, and it is said to have a higher degree of completion.

The MS-09R Rick Dom (リック・ドム Rikku Domu?) is a mass production space combat mobile suit and a variant of the MS-09 Dom. It was introduced in the TV anime Mobile Suit Gundam. Proposed by Zimmad as one of the competing designs for Zeon's next generation space-use mobile suit in the middle stage of the One Year War, the MS-09R was a variant of the ground-use MS-09 Dom. The MS-09 was chosen as the developmental base due to its good basic design. Its block structure was a major factor that enabled its specifications to be easily changed without modifications to its basic frame.The MS-09R removed the ground-use equipment of its predecessor and replaced them with space-use equipment, increasing its propellant capacity and its vernier thruster output. The thermonuclear jet engines on its feet were replaced with thermonuclear rocket engines. Its total spec, including cost and ease of manufacture, surpassed that of the MS-06R-2 Zaku II High Mobility Type, the most advanced mobile suit at the time.In addition to retaining the Dom's armaments, including its signature Giant Bazooka, some units under Dozle Zabi were said to be equipped with the experimental Beam Bazooka. Though the Rick Dom's generator output was insufficient to use beam weapons, the Beam Bazooka did not require energy from the mobile suit to be used. However, the weapon never reached mass production due to frequent explosions, though it was rumored that an improved variant of the Rick Dom capable of using the Beam Bazooka safely existed.

Entry Grade 1/144 RX093 νGUNDAM The RX-93 ν Gundam (aka Nu Gundam, Nu) is a mobile suit that appears in Mobile Suit Gundam: Char's Counterattack. It was designed and piloted by Amuro Ray.

HGGBB ZGMF-X20A-PF Gundam Perfect Strike Freedom The ZGMF-X20A-PF Gundam Perfect Strike Freedom (ガンダムパーフェクトストライクフリーダム Gandamu Pāfekuto Sutoraiku Furīdamu?) is a Gunpla that appears in the Gundam Breaker Battlogue ONA. It first debuted in Gundam Breaker Mobile.

Principality of Zeon Char Aznable's Mobile Suit MS-06S Char's Zaku II is a mobile suit featured in the Mobile Suit Gundam: The Origin manga and its OVA adaptation. It was piloted by Char Aznable during the One Year War. At long last the HGUC Char's Zaku has been updated as part of the 40th Anniversary of GunPla! Pair it alongside HGUC #191 RX-78-2 to recreate scenes from the 1979 TV Anime series! Special features include design elements that allows expressive articulation via structural and material part usage. The skirt armor can be built using either soft material to recreate its one piece apperance in the TV show or be built with individual pieces to allow for a greater mechanical appearance. Includes Zaku Machine Gun, Heat Hawk, and Bazooka that can be stored on skirt armor. Only product with affixed official Bluefin and Bandai Namco label has been thoroughly tested for safety and meets all North American consumer product safety regulations and entitles the purchaser to product support assistance