Tools

Splash Paints SP-072 2K Gloss Black The Splash Paints SP-072 2K Gloss Black is a two-component urethane color coat designed for airbrush application on scale models, Gunpla, and 3D prints. Functioning as both a standalone gloss black finish and an ideal base coat for metalizer or metallic paint application, this 2K formula produces a non-shrinking, high-gloss surface that is extremely UV stable and resistant to fading. Each set includes a 30 ml (1 oz) Gloss Black bottle and a 10 ml (0.3 oz) catalyst bottle, mixed at a 4:1 ratio before application. Key Features Two-Component Urethane Formula: Requires mixing color with included catalyst at a 4:1 ratio before spraying. Non-Shrinking Surface: Maintains maximum gloss level with no shrinkage during curing. Extremely UV Stable: Resistant to fading for long-term display durability. No Polishing Required: Produces a high-gloss finish without the need for polishing when applied properly. Cut and Buff Compatible: Can be sanded and buffed after curing without losing gloss level. Ideal Metalizer Base: Serves as a recommended gloss black base coat for Splash Paints Metalizer Series and other metallic paints. Flash off for 5 minutes, then spray metallic while the surface is still wet. Cure Time: 48–72 hours at room temperature, or 60 minutes in a dehydrator at 120°F after cooldown. Application Notes 1st coat: Medium coat. Flash off 5–10 minutes. 2nd coat: Medium to wet coat. Flash off 5–10 minutes. 3rd coat: Wet coat. Flash off 15 minutes prior to baking cycle or air dry. For metallic application over gloss black: flash off for 5 minutes after final coat, then spray metallic while the surface is still wet. Allow 24 hours cure time before handling. Catalyst contains isocyanate. An organic vapor respirator must be worn during use. Use in a well-ventilated area only. Product is flammable and must be kept away from all heat sources. Included Components Gloss Black: 30 ml (1 oz) Catalyst: 10 ml (0.3 oz) Specifications Brand Splash Paints SKU SP-072 Product Type 2K Urethane Gloss Black Color Coat Formula Two-component (color + catalyst) Application Airbrush only Mixing Ratio 4:1 (color to catalyst) Color Volume 30 ml (1 oz) Catalyst Volume 10 ml (0.3 oz) Cure Time 48–72 hours at room temperature; 60 minutes in dehydrator at 120°F UV Stability Extremely UV stable, resistant to fading Country of Origin USA

Splash Paints 2K Ultra Clear Coat The Splash Paints 2K Ultra Clear is a two-component urethane clear coat designed for airbrush application as a final protective top coat on scale models, Gunpla, and 3D prints. Available in Gloss and Matte finishes, this high-solid clear coat provides enhanced self-leveling, increased UV stabilization, and zero clear coat shrinkage during curing. Each set includes a 30 ml (1 oz) clear coat bottle and a 10 ml (0.3 oz) catalyst bottle, mixed at a 3:1 ratio before application. Key Features Two-Component Urethane Formula: Requires mixing clear coat with included catalyst at a 3:1 ratio before spraying. High-Solid Clear Coat: Enhanced self-leveling properties produce an orange-peel-free finish. UV Stabilized: Rated for outdoor durability of 10+ years with no yellowing or degradation. No Shrinkage: Zero clear coat shrinkage during curing for a consistent final surface. Cut and Buff Compatible (Gloss): The 2K Ultra Gloss can be cut and buffed after curing without losing shine. Two Finish Options: Ultra Gloss for high-shine finishes and Ultra Matte for flat finishes. Cure Time: 48–72 hours at room temperature, or 60 minutes in a dehydrator at 120°F after cooldown. Application Notes (Gloss) 1st coat: Light coat. Flash off 5–10 minutes. 2nd coat: Medium to wet coat. Flash off 5–10 minutes. 3rd coat: Wet coat. Flash off 5–10 minutes. Application Notes (Matte) 1st coat: Tack coat. Flash off 5 minutes. 2nd coat: Wet coat. Flash off 5 minutes. Do not exceed 2 coats. Additional layers will make the surface glossy. Included Components Clear Coat: 30 ml (1 oz) Catalyst: 10 ml (0.3 oz) Specifications Brand Splash Paints Product Type 2K Urethane Clear Coat Formula Two-component (clear coat + catalyst) Application Airbrush only Mixing Ratio 3:1 (clear coat to catalyst); up to 0.5 parts thinner optional Clear Coat Volume 30 ml (1 oz) Catalyst Volume 10 ml (0.3 oz) Finishes Available Ultra Gloss, Ultra Matte Cure Time 48–72 hours at room temperature; 60 minutes in dehydrator at 120°F UV Rating 10+ years outdoor rated Country of Origin USA

Splash Paints 2K Urethane Primer The Splash Paints 2K Primer is a two-component urethane primer designed for airbrush application on scale models, Gunpla, and 3D prints. Available in White (SPP-001), Grey (SPP-002), and Black (SPP-003), this 2K primer provides superior durability and adhesion compared to single-component primers. Each set includes a 60 ml (2 oz) urethane primer bottle and a 15 ml (0.5 oz) urethane catalyst bottle, requiring thorough mixing before application. Key Features Two-Component Urethane Formula: Requires mixing primer with included catalyst before spraying for enhanced durability. Superior Surface Preparation: Apply over surfaces sanded to at least #800–#1000 grit for optimal adhesion. Fast Cure Time: 3–4 hours at room temperature, or 10–15 minutes at 140°F in a dehydrator. Sandable Finish: Wet-sand with #1500–2000 grit after curing for a smooth surface before basecoat application. Three Color Options: White, Grey, and Black to accommodate different basecoat color requirements. Recommended PSI: 20–30 PSI. Apply medium to wet coats in multiple passes. Recommended Nozzle Size: 0.35 mm or larger for primer application. Pot Life: Approximately 2 hours after mixing. Clean all product from airbrush immediately after use. Application Notes Coat 1: Medium wet passes. Coat 2: Wet passes. Coat 3: Additional wet passes if necessary. After curing, wet-sand the entire surface with #1500–2000 grit before applying any base coats. Catalyst contains isocyanate. An organic vapor respirator (such as 3M 60921) must be worn during use. Use in a well-ventilated area only. Product is flammable and must be kept away from all heat sources. Included Components Urethane Primer: 60 ml (2 oz) Urethane Catalyst: 15 ml (0.5 oz) Specifications Brand Splash Paints Product Type 2K Urethane Primer Formula Two-component (primer + catalyst) Application Airbrush only Primer Volume 60 ml (2 oz) Catalyst Volume 15 ml (0.5 oz) Colors Available White (SPP-001), Grey (SPP-002), Black (SPP-003) Thinning Required No (pre-thinned; catalyst mixing required) Recommended PSI 20–30 PSI Recommended Nozzle 0.35 mm or larger Cure Time 3–4 hours at room temperature; 10–15 minutes at 140°F in dehydrator Pot Life Approx. 2 hours after mixing Country of Origin USA

Splash Paints 2K Urethane Primer The Splash Paints 2K Primer is a two-component urethane primer designed for airbrush application on scale models, Gunpla, and 3D prints. Available in White (SPP-001), Grey (SPP-002), and Black (SPP-003), this 2K primer provides superior durability and adhesion compared to single-component primers. Each set includes a 60 ml (2 oz) urethane primer bottle and a 15 ml (0.5 oz) urethane catalyst bottle, requiring thorough mixing before application. Key Features Two-Component Urethane Formula: Requires mixing primer with included catalyst before spraying for enhanced durability. Superior Surface Preparation: Apply over surfaces sanded to at least #800–#1000 grit for optimal adhesion. Fast Cure Time: 3–4 hours at room temperature, or 10–15 minutes at 140°F in a dehydrator. Sandable Finish: Wet-sand with #1500–2000 grit after curing for a smooth surface before basecoat application. Three Color Options: White, Grey, and Black to accommodate different basecoat color requirements. Recommended PSI: 20–30 PSI. Apply medium to wet coats in multiple passes. Recommended Nozzle Size: 0.35 mm or larger for primer application. Pot Life: Approximately 2 hours after mixing. Clean all product from airbrush immediately after use. Application Notes Coat 1: Medium wet passes. Coat 2: Wet passes. Coat 3: Additional wet passes if necessary. After curing, wet-sand the entire surface with #1500–2000 grit before applying any base coats. Catalyst contains isocyanate. An organic vapor respirator (such as 3M 60921) must be worn during use. Use in a well-ventilated area only. Product is flammable and must be kept away from all heat sources. Included Components Urethane Primer: 60 ml (2 oz) Urethane Catalyst: 15 ml (0.5 oz) Specifications Brand Splash Paints Product Type 2K Urethane Primer Formula Two-component (primer + catalyst) Application Airbrush only Primer Volume 60 ml (2 oz) Catalyst Volume 15 ml (0.5 oz) Colors Available White (SPP-001), Grey (SPP-002), Black (SPP-003) Thinning Required No (pre-thinned; catalyst mixing required) Recommended PSI 20–30 PSI Recommended Nozzle 0.35 mm or larger Cure Time 3–4 hours at room temperature; 10–15 minutes at 140°F in dehydrator Pot Life Approx. 2 hours after mixing Country of Origin USA

Splash Paints 1K Acrylic Lacquer Primer The Splash Paints 1K Primer is a single-component acrylic lacquer primer designed for airbrush application on plastic model kits, resin parts, and 3D prints. Available in four colors — White, Light Grey, Dark Grey, and Black — the 1K Primer is a ready-to-use surfacer that fills scratches as fine as #800 grit and provides a smooth foundation for basecoat application. Each bottle contains 60 ml (2 oz) of pre-thinned primer with no catalyst or mixing required. Key Features Single-Component Formula: No catalyst or activator required. Ready to use directly from the bottle. Pre-Thinned and Airbrush-Ready: No additional thinning needed. Shake, load, and spray. Surfacer Capability: Fills scratches down to #800 grit for a smooth surface before basecoat application. Fast Dry Time: Ready to sand in under 2 hours at room temperature, or 5–10 minutes with a dehydrator. Air Dry Recommended: Heat cure at temperatures below 120°F if using a dehydrator. Ideal for Plastics and Resin: Formulated specifically for plastic model kits and resin media. Recommended PSI: 20–25 PSI. Apply wet layers for optimal film build. Recommended Nozzle Size: 0.35 mm or larger for primer application. Four Color Options: White, Light Grey, Dark Grey, and Black to suit different basecoat requirements. Application Notes Apply at least 2–3 coats for optimal film thickness prior to basecoat application. Flash off until matte between coats. Wet-sand with #1500–2000 grit before applying basecoat for a smooth finish. The White primer has an off-white finish; bright colors may require a pure white base coat after priming. A respirator must be worn during use. Product is flammable and must be kept away from all heat sources. Specifications Brand Splash Paints Product Type 1K Acrylic Lacquer Primer (Surfacer) Formula Single-component (no catalyst required) Application Airbrush only Volume 60 ml (2 oz) per bottle Colors Available White, Light Grey, Dark Grey, Black Thinning Required No (pre-thinned) Recommended PSI 20–25 PSI Recommended Nozzle 0.35 mm or larger Dry Time Under 2 hours at room temperature; 5–10 minutes with dehydrator Compatible Media Plastic, resin Country of Origin USA

Splash Paints 1K Acrylic Lacquer Primer The Splash Paints 1K Primer is a single-component acrylic lacquer primer designed for airbrush application on plastic model kits, resin parts, and 3D prints. Available in four colors — White, Light Grey, Dark Grey, and Black — the 1K Primer is a ready-to-use surfacer that fills scratches as fine as #800 grit and provides a smooth foundation for basecoat application. Each bottle contains 60 ml (2 oz) of pre-thinned primer with no catalyst or mixing required. Key Features Single-Component Formula: No catalyst or activator required. Ready to use directly from the bottle. Pre-Thinned and Airbrush-Ready: No additional thinning needed. Shake, load, and spray. Surfacer Capability: Fills scratches down to #800 grit for a smooth surface before basecoat application. Fast Dry Time: Ready to sand in under 2 hours at room temperature, or 5–10 minutes with a dehydrator. Air Dry Recommended: Heat cure at temperatures below 120°F if using a dehydrator. Ideal for Plastics and Resin: Formulated specifically for plastic model kits and resin media. Recommended PSI: 20–25 PSI. Apply wet layers for optimal film build. Recommended Nozzle Size: 0.35 mm or larger for primer application. Four Color Options: White, Light Grey, Dark Grey, and Black to suit different basecoat requirements. Application Notes Apply at least 2–3 coats for optimal film thickness prior to basecoat application. Flash off until matte between coats. Wet-sand with #1500–2000 grit before applying basecoat for a smooth finish. The White primer has an off-white finish; bright colors may require a pure white base coat after priming. A respirator must be worn during use. Product is flammable and must be kept away from all heat sources. Specifications Brand Splash Paints Product Type 1K Acrylic Lacquer Primer (Surfacer) Formula Single-component (no catalyst required) Application Airbrush only Volume 60 ml (2 oz) per bottle Colors Available White, Light Grey, Dark Grey, Black Thinning Required No (pre-thinned) Recommended PSI 20–25 PSI Recommended Nozzle 0.35 mm or larger Dry Time Under 2 hours at room temperature; 5–10 minutes with dehydrator Compatible Media Plastic, resin Country of Origin USA

Splash Paints 1K Acrylic Lacquer Primer The Splash Paints 1K Primer is a single-component acrylic lacquer primer designed for airbrush application on plastic model kits, resin parts, and 3D prints. Available in four colors — White, Light Grey, Dark Grey, and Black — the 1K Primer is a ready-to-use surfacer that fills scratches as fine as #800 grit and provides a smooth foundation for basecoat application. Each bottle contains 60 ml (2 oz) of pre-thinned primer with no catalyst or mixing required. Key Features Single-Component Formula: No catalyst or activator required. Ready to use directly from the bottle. Pre-Thinned and Airbrush-Ready: No additional thinning needed. Shake, load, and spray. Surfacer Capability: Fills scratches down to #800 grit for a smooth surface before basecoat application. Fast Dry Time: Ready to sand in under 2 hours at room temperature, or 5–10 minutes with a dehydrator. Air Dry Recommended: Heat cure at temperatures below 120°F if using a dehydrator. Ideal for Plastics and Resin: Formulated specifically for plastic model kits and resin media. Recommended PSI: 20–25 PSI. Apply wet layers for optimal film build. Recommended Nozzle Size: 0.35 mm or larger for primer application. Four Color Options: White, Light Grey, Dark Grey, and Black to suit different basecoat requirements. Application Notes Apply at least 2–3 coats for optimal film thickness prior to basecoat application. Flash off until matte between coats. Wet-sand with #1500–2000 grit before applying basecoat for a smooth finish. The White primer has an off-white finish; bright colors may require a pure white base coat after priming. A respirator must be worn during use. Product is flammable and must be kept away from all heat sources. Specifications Brand Splash Paints Product Type 1K Acrylic Lacquer Primer (Surfacer) Formula Single-component (no catalyst required) Application Airbrush only Volume 60 ml (2 oz) per bottle Colors Available White, Light Grey, Dark Grey, Black Thinning Required No (pre-thinned) Recommended PSI 20–25 PSI Recommended Nozzle 0.35 mm or larger Dry Time Under 2 hours at room temperature; 5–10 minutes with dehydrator Compatible Media Plastic, resin Country of Origin USA

Splash Paints Metalizer Series Lacquer Airbrush Paint The Splash Paints Metalizer Series is a line of ultra-fine metallic flake lacquer paints formulated for airbrush application on scale models, Gunpla, and 3D prints. Featuring 11 metallic colors including Aluminium, Gunmetal, Titanium, Gold, Copper, and Magnesium, the Metalizer Series produces realistic metal-like finishes with high pigment density. All Metalizer paints are pre-thinned, airbrush-ready, and supplied in 30 ml (1 oz) bottles with shaker balls. Key Features Ultra-Fine Metallic Flakes: Precision-sized particles produce realistic metal finishes suitable for scale modeling. High Pigment Density: Updated formula with increased pigment levels for enhanced coverage and color accuracy. Pre-Thinned and Airbrush-Ready: No additional thinning required. Shake, load, and spray directly from the bottle. Must Be Applied Over Black Base: Requires black primer or base coat for best results. Splash Paints 1K Black Primer, 2K Black Primer, or a gloss black base coat is recommended. Clear Coat Required: Without a gloss clear coat, metalizer colors may appear differently than intended. Recommended PSI: 25–30 PSI. Apply thin layers only and avoid wet coats. Recommended Nozzle Size: 0.3 mm airbrush nozzle for color application. Durable Finish: Metalizer finishes are handleable once cured. Application Notes Apply thin layers over black primer or base coat. Flash off until matte between coats. Avoid spraying wet coats. Light passes produce the best metallic effect. A gloss clear coat (such as Splash Paints 2K Ultra Clear) should be applied to protect the finish and achieve intended appearance. A respirator must be worn during use. Product is flammable and must be kept away from all heat sources. Specifications Brand Splash Paints Series Metalizer Series Paint Type Acrylic lacquer with metallic flakes Application Airbrush only Volume 30 ml (1 oz) per bottle Colors Available 11 Thinning Required No (pre-thinned) Recommended PSI 25–30 PSI Recommended Nozzle 0.3 mm Base Coat Required Yes (black primer or gloss black) Clear Coat Required Yes Country of Origin USA

Splash Paints Metalizer Series Lacquer Airbrush Paint The Splash Paints Metalizer Series is a line of ultra-fine metallic flake lacquer paints formulated for airbrush application on scale models, Gunpla, and 3D prints. Featuring 11 metallic colors including Aluminium, Gunmetal, Titanium, Gold, Copper, and Magnesium, the Metalizer Series produces realistic metal-like finishes with high pigment density. All Metalizer paints are pre-thinned, airbrush-ready, and supplied in 30 ml (1 oz) bottles with shaker balls. Key Features Ultra-Fine Metallic Flakes: Precision-sized particles produce realistic metal finishes suitable for scale modeling. High Pigment Density: Updated formula with increased pigment levels for enhanced coverage and color accuracy. Pre-Thinned and Airbrush-Ready: No additional thinning required. Shake, load, and spray directly from the bottle. Must Be Applied Over Black Base: Requires black primer or base coat for best results. Splash Paints 1K Black Primer, 2K Black Primer, or a gloss black base coat is recommended. Clear Coat Required: Without a gloss clear coat, metalizer colors may appear differently than intended. Recommended PSI: 25–30 PSI. Apply thin layers only and avoid wet coats. Recommended Nozzle Size: 0.3 mm airbrush nozzle for color application. Durable Finish: Metalizer finishes are handleable once cured. Application Notes Apply thin layers over black primer or base coat. Flash off until matte between coats. Avoid spraying wet coats. Light passes produce the best metallic effect. A gloss clear coat (such as Splash Paints 2K Ultra Clear) should be applied to protect the finish and achieve intended appearance. A respirator must be worn during use. Product is flammable and must be kept away from all heat sources. Specifications Brand Splash Paints Series Metalizer Series Paint Type Acrylic lacquer with metallic flakes Application Airbrush only Volume 30 ml (1 oz) per bottle Colors Available 11 Thinning Required No (pre-thinned) Recommended PSI 25–30 PSI Recommended Nozzle 0.3 mm Base Coat Required Yes (black primer or gloss black) Clear Coat Required Yes Country of Origin USA

Splash Paints Metalizer Series Lacquer Airbrush Paint The Splash Paints Metalizer Series is a line of ultra-fine metallic flake lacquer paints formulated for airbrush application on scale models, Gunpla, and 3D prints. Featuring 11 metallic colors including Aluminium, Gunmetal, Titanium, Gold, Copper, and Magnesium, the Metalizer Series produces realistic metal-like finishes with high pigment density. All Metalizer paints are pre-thinned, airbrush-ready, and supplied in 30 ml (1 oz) bottles with shaker balls. Key Features Ultra-Fine Metallic Flakes: Precision-sized particles produce realistic metal finishes suitable for scale modeling. High Pigment Density: Updated formula with increased pigment levels for enhanced coverage and color accuracy. Pre-Thinned and Airbrush-Ready: No additional thinning required. Shake, load, and spray directly from the bottle. Must Be Applied Over Black Base: Requires black primer or base coat for best results. Splash Paints 1K Black Primer, 2K Black Primer, or a gloss black base coat is recommended. Clear Coat Required: Without a gloss clear coat, metalizer colors may appear differently than intended. Recommended PSI: 25–30 PSI. Apply thin layers only and avoid wet coats. Recommended Nozzle Size: 0.3 mm airbrush nozzle for color application. Durable Finish: Metalizer finishes are handleable once cured. Application Notes Apply thin layers over black primer or base coat. Flash off until matte between coats. Avoid spraying wet coats. Light passes produce the best metallic effect. A gloss clear coat (such as Splash Paints 2K Ultra Clear) should be applied to protect the finish and achieve intended appearance. A respirator must be worn during use. Product is flammable and must be kept away from all heat sources. Specifications Brand Splash Paints Series Metalizer Series Paint Type Acrylic lacquer with metallic flakes Application Airbrush only Volume 30 ml (1 oz) per bottle Colors Available 11 Thinning Required No (pre-thinned) Recommended PSI 25–30 PSI Recommended Nozzle 0.3 mm Base Coat Required Yes (black primer or gloss black) Clear Coat Required Yes Country of Origin USA

Splash Paints Mecha Series Lacquer Airbrush Paint The Splash Paints Mecha Series is a line of high-concentrate pigment lacquer paints designed for airbrush application on scale models, Gunpla, and 3D prints. The Mecha Series includes 27 colors across two sub-ranges: the core MS Colors (MSO-001 through MSO-012) featuring mecha-inspired tones such as Mecha Red, Zeon Grey, and Titan Blue, and the EVA Colors (MSO-013 through MSO-027) featuring Evangelion-inspired shades including Eva Neon Green, Eva Midnight Purple, and Eva Proto Yellow. All Mecha Series paints are pre-thinned, airbrush-ready, and supplied in 30 ml (1 oz) bottles with shaker balls. Key Features High-Concentrate Pigments: Formulated for strong opacity with 1 coat for shading and 2 coats for full coverage. Pre-Thinned and Airbrush-Ready: No additional thinning required. Shake, load, and spray directly from the bottle. Lacquer-Based Formula: Safe to apply over most lacquer-compatible primer types. Fast Drying: Flash off until matte between coats for efficient multi-coat application. Recommended PSI: 20–25 PSI for optimal atomization and coverage. Recommended Nozzle Size: 0.3 mm airbrush nozzle for color application. Wide Color Range: 27 colors across MS Colors and EVA Colors sub-lines, covering core mecha tones and Evangelion-inspired palettes. Application Notes MS Colors (MSO-001 – MSO-012): Apply over grey or white primer for most colors. EVA Colors (MSO-013 – MSO-027): White or light grey primer is recommended for most colors; dark grey or black primer for select darker shades (MSO-015, MSO-022, MSO-025, MSO-026). A respirator must be worn during use. Product is flammable and must be kept away from all heat sources. Specifications Brand Splash Paints Series Mecha Series (MS Colors + EVA Colors) Paint Type Acrylic lacquer Application Airbrush only Volume 30 ml (1 oz) per bottle Colors Available 27 (12 MS Colors, 15 EVA Colors) Thinning Required No (pre-thinned) Recommended PSI 20–25 PSI Recommended Nozzle 0.3 mm Country of Origin USA

Splash Paints Mecha Series Lacquer Airbrush Paint The Splash Paints Mecha Series is a line of high-concentrate pigment lacquer paints designed for airbrush application on scale models, Gunpla, and 3D prints. The Mecha Series includes 27 colors across two sub-ranges: the core MS Colors (MSO-001 through MSO-012) featuring mecha-inspired tones such as Mecha Red, Zeon Grey, and Titan Blue, and the EVA Colors (MSO-013 through MSO-027) featuring Evangelion-inspired shades including Eva Neon Green, Eva Midnight Purple, and Eva Proto Yellow. All Mecha Series paints are pre-thinned, airbrush-ready, and supplied in 30 ml (1 oz) bottles with shaker balls. Key Features High-Concentrate Pigments: Formulated for strong opacity with 1 coat for shading and 2 coats for full coverage. Pre-Thinned and Airbrush-Ready: No additional thinning required. Shake, load, and spray directly from the bottle. Lacquer-Based Formula: Safe to apply over most lacquer-compatible primer types. Fast Drying: Flash off until matte between coats for efficient multi-coat application. Recommended PSI: 20–25 PSI for optimal atomization and coverage. Recommended Nozzle Size: 0.3 mm airbrush nozzle for color application. Wide Color Range: 27 colors across MS Colors and EVA Colors sub-lines, covering core mecha tones and Evangelion-inspired palettes. Application Notes MS Colors (MSO-001 – MSO-012): Apply over grey or white primer for most colors. EVA Colors (MSO-013 – MSO-027): White or light grey primer is recommended for most colors; dark grey or black primer for select darker shades (MSO-015, MSO-022, MSO-025, MSO-026). A respirator must be worn during use. Product is flammable and must be kept away from all heat sources. Specifications Brand Splash Paints Series Mecha Series (MS Colors + EVA Colors) Paint Type Acrylic lacquer Application Airbrush only Volume 30 ml (1 oz) per bottle Colors Available 27 (12 MS Colors, 15 EVA Colors) Thinning Required No (pre-thinned) Recommended PSI 20–25 PSI Recommended Nozzle 0.3 mm Country of Origin USA

Splash Paints Mecha Series Lacquer Airbrush Paint The Splash Paints Mecha Series is a line of high-concentrate pigment lacquer paints designed for airbrush application on scale models, Gunpla, and 3D prints. The Mecha Series includes 27 colors across two sub-ranges: the core MS Colors (MSO-001 through MSO-012) featuring mecha-inspired tones such as Mecha Red, Zeon Grey, and Titan Blue, and the EVA Colors (MSO-013 through MSO-027) featuring Evangelion-inspired shades including Eva Neon Green, Eva Midnight Purple, and Eva Proto Yellow. All Mecha Series paints are pre-thinned, airbrush-ready, and supplied in 30 ml (1 oz) bottles with shaker balls. Key Features High-Concentrate Pigments: Formulated for strong opacity with 1 coat for shading and 2 coats for full coverage. Pre-Thinned and Airbrush-Ready: No additional thinning required. Shake, load, and spray directly from the bottle. Lacquer-Based Formula: Safe to apply over most lacquer-compatible primer types. Fast Drying: Flash off until matte between coats for efficient multi-coat application. Recommended PSI: 20–25 PSI for optimal atomization and coverage. Recommended Nozzle Size: 0.3 mm airbrush nozzle for color application. Wide Color Range: 27 colors across MS Colors and EVA Colors sub-lines, covering core mecha tones and Evangelion-inspired palettes. Application Notes MS Colors (MSO-001 – MSO-012): Apply over grey or white primer for most colors. EVA Colors (MSO-013 – MSO-027): White or light grey primer is recommended for most colors; dark grey or black primer for select darker shades (MSO-015, MSO-022, MSO-025, MSO-026). A respirator must be worn during use. Product is flammable and must be kept away from all heat sources. Specifications Brand Splash Paints Series Mecha Series (MS Colors + EVA Colors) Paint Type Acrylic lacquer Application Airbrush only Volume 30 ml (1 oz) per bottle Colors Available 27 (12 MS Colors, 15 EVA Colors) Thinning Required No (pre-thinned) Recommended PSI 20–25 PSI Recommended Nozzle 0.3 mm Country of Origin USA

Splash Paints Mecha Series Lacquer Airbrush Paint The Splash Paints Mecha Series is a line of high-concentrate pigment lacquer paints designed for airbrush application on scale models, Gunpla, and 3D prints. The Mecha Series includes 27 colors across two sub-ranges: the core MS Colors (MSO-001 through MSO-012) featuring mecha-inspired tones such as Mecha Red, Zeon Grey, and Titan Blue, and the EVA Colors (MSO-013 through MSO-027) featuring Evangelion-inspired shades including Eva Neon Green, Eva Midnight Purple, and Eva Proto Yellow. All Mecha Series paints are pre-thinned, airbrush-ready, and supplied in 30 ml (1 oz) bottles with shaker balls. Key Features High-Concentrate Pigments: Formulated for strong opacity with 1 coat for shading and 2 coats for full coverage. Pre-Thinned and Airbrush-Ready: No additional thinning required. Shake, load, and spray directly from the bottle. Lacquer-Based Formula: Safe to apply over most lacquer-compatible primer types. Fast Drying: Flash off until matte between coats for efficient multi-coat application. Recommended PSI: 20–25 PSI for optimal atomization and coverage. Recommended Nozzle Size: 0.3 mm airbrush nozzle for color application. Wide Color Range: 27 colors across MS Colors and EVA Colors sub-lines, covering core mecha tones and Evangelion-inspired palettes. Application Notes MS Colors (MSO-001 – MSO-012): Apply over grey or white primer for most colors. EVA Colors (MSO-013 – MSO-027): White or light grey primer is recommended for most colors; dark grey or black primer for select darker shades (MSO-015, MSO-022, MSO-025, MSO-026). A respirator must be worn during use. Product is flammable and must be kept away from all heat sources. Specifications Brand Splash Paints Series Mecha Series (MS Colors + EVA Colors) Paint Type Acrylic lacquer Application Airbrush only Volume 30 ml (1 oz) per bottle Colors Available 27 (12 MS Colors, 15 EVA Colors) Thinning Required No (pre-thinned) Recommended PSI 20–25 PSI Recommended Nozzle 0.3 mm Country of Origin USA

Splash Paints Mecha Series Lacquer Airbrush Paint The Splash Paints Mecha Series is a line of high-concentrate pigment lacquer paints designed for airbrush application on scale models, Gunpla, and 3D prints. The Mecha Series includes 27 colors across two sub-ranges: the core MS Colors (MSO-001 through MSO-012) featuring mecha-inspired tones such as Mecha Red, Zeon Grey, and Titan Blue, and the EVA Colors (MSO-013 through MSO-027) featuring Evangelion-inspired shades including Eva Neon Green, Eva Midnight Purple, and Eva Proto Yellow. All Mecha Series paints are pre-thinned, airbrush-ready, and supplied in 30 ml (1 oz) bottles with shaker balls. Key Features High-Concentrate Pigments: Formulated for strong opacity with 1 coat for shading and 2 coats for full coverage. Pre-Thinned and Airbrush-Ready: No additional thinning required. Shake, load, and spray directly from the bottle. Lacquer-Based Formula: Safe to apply over most lacquer-compatible primer types. Fast Drying: Flash off until matte between coats for efficient multi-coat application. Recommended PSI: 20–25 PSI for optimal atomization and coverage. Recommended Nozzle Size: 0.3 mm airbrush nozzle for color application. Wide Color Range: 27 colors across MS Colors and EVA Colors sub-lines, covering core mecha tones and Evangelion-inspired palettes. Application Notes MS Colors (MSO-001 – MSO-012): Apply over grey or white primer for most colors. EVA Colors (MSO-013 – MSO-027): White or light grey primer is recommended for most colors; dark grey or black primer for select darker shades (MSO-015, MSO-022, MSO-025, MSO-026). A respirator must be worn during use. Product is flammable and must be kept away from all heat sources. Specifications Brand Splash Paints Series Mecha Series (MS Colors + EVA Colors) Paint Type Acrylic lacquer Application Airbrush only Volume 30 ml (1 oz) per bottle Colors Available 27 (12 MS Colors, 15 EVA Colors) Thinning Required No (pre-thinned) Recommended PSI 20–25 PSI Recommended Nozzle 0.3 mm Country of Origin USA

TuWang (TW) DT008 Folding Light Wing Expansion Effect for 1/100 MGEX Strike Freedom The TuWang (TW) DT008 Folding Light Wing Expansion Effect is a third-party aftermarket accessory set designed for the Bandai MGEX 1/100 ZGMF-X20A Strike Freedom Gundam. This upgrade kit replaces the standard wing effect parts with expanded, foldable light wing components that reproduce the Strike Freedom's iconic "Wings of Light" in a larger, more dramatic form factor. Key Features Foldable Light Wing Design: The light wing components feature a folding mechanism, allowing the wings to be posed in both deployed and stowed configurations. MGEX Strike Freedom Compatibility: Engineered specifically for the Bandai MGEX 1/100 Strike Freedom Gundam (ZGMF-X20A). Not compatible with other Strike Freedom kit grades. Expansion-Scale Wings: Provides larger light wing effect parts compared to the stock MGEX kit wings, creating a more imposing display presence. Replacement Runner Parts Included: Some versions of this kit include replacement runner parts (G1, G21, G31, G43, and G45) for the base MGEX kit to ensure proper fitment with the expanded wings. Plastic Construction: Made from plastic material, consistent with standard Gunpla aftermarket accessories. Included Components Folding light wing expansion effect parts Mounting and connection components for MGEX Strike Freedom backpack Specifications Brand TuWang (TW) Model Number DT008 Scale 1/100 Compatibility Bandai MGEX 1/100 ZGMF-X20A Strike Freedom Gundam Material Plastic Product Type Aftermarket expansion effect accessory (assembly required) Country of Origin China Age Recommendation 12+ Note: The MGEX 1/100 Strike Freedom Gundam base kit is sold separately and is required to use this accessory set.

A surfacer containing a primer component. [Precautions for use] Store out of reach of children and be careful not to accidentally swallow or eat. Since it contains organic solvent, improve ventilation both during painting and drying. When spraying paint, be careful not to get it on people or objects. Wear a mask and gloves during handling to avoid touching the skin as much as possible. If it gets on your skin, wash it with soapy water. In case of contact with eyes, rinse with water. If you feel sick, rest in a clean air. Seek medical attention immediately if you experience pain or changes in appearance. Cover the remaining paint and do not store it in direct sunlight, near heaters, or in rusty water or humid places in cans to prevent damage. Do not apply in places with fire. Do not use for anything other than painting.

Bandai Spirits Entry Nipper The Bandai Spirits Entry Nipper is an entry-level plastic nipper designed for beginners building plastic model kits. Manufactured by Bandai Spirits, this tool is intended for basic gate cutting on plastic runners and is commonly recommended for first-time Gunpla builders or casual hobby use. Key Features Beginner-Friendly Tool: Designed for entry-level builders and first-time model kit assembly. Double-Edge Cutting Blade: Standard double-blade nipper suitable for rough gate removal. Plastic Use Only: Intended for cutting plastic model kit runners. Lightweight Design: Easy to handle and control for new hobbyists. Official Bandai Tool: Produced by Bandai Spirits for use with Gunpla and other plastic model kits. Recommended Usage First cut to remove parts from runners Beginner and casual model kit assembly Not recommended for flush cuts or final nub removal Specifications Brand Bandai Spirits Product Name Entry Nipper Blade Type Double-edge Supported Materials Plastic only Target User Beginner Category Model Kit Tool

GodHand GH-PN-120 Blade One Nipper (Plastic Only) The GodHand GH-PN-120 Blade One Nipper is a single-edge precision nipper designed for clean gate cutting on plastic model kits. Built for durability and control, it includes safety-oriented features such as a blade-break prevention stopper, an over-opening prevention pin, a return spring, and an included protective nipper cap. Key Features Single-Edge Blade: Single-edge cutting design intended for cleaner cuts on plastic gates. Cutting Capacity: Supports plastic (PS, PP, ABS, PE) up to 3 mm; transparent or semi-transparent PS is limited to 2 mm. Safety and Handling: Includes a blade-break prevention stopper, over-opening prevention pin, and spring-assisted operation. Included Protection: Comes with an original protective nipper cap for storage. Specifications Brand GodHand Product Name Blade One Nipper Model Number GH-PN-120 Total Length Approx. 120 mm Weight Approx. 60 g Blade Type Single-edge Supported Materials Plastic only (PS, PP, ABS, PE) Cutting Capacity Up to 3 mm; transparent / semi-transparent PS up to 2 mm Included Protective nipper cap

A surfacer containing a primer component. [Precautions for use] Store out of reach of children and be careful not to accidentally swallow or eat. Since it contains organic solvent, improve ventilation both during painting and drying. When spraying paint, be careful not to get it on people or objects. Wear a mask and gloves during handling to avoid touching the skin as much as possible. If it gets on your skin, wash it with soapy water. In case of contact with eyes, rinse with water. If you feel sick, rest in a clean air. Seek medical attention immediately if you experience pain or changes in appearance. Cover the remaining paint and do not store it in direct sunlight, near heaters, or in rusty water or humid places in cans to prevent damage. Do not apply in places with fire. Do not use for anything other than painting.