Sheik Mainland

Overview The Sheik Mainland 3MIN Project-A Fenrir S2 Sniper Type is a 1/18 scale mecha model kit and the long-range specialist variant of the Fenrir platform from Sheik Mainland's 3MIN Project series. The S2 introduces two major systems not found on the Standard Type or Assault Type: interchangeable S1/S2 head sights for different combat roles and a backpack-mounted "Armadillo" layered armor system that provides asymmetric one-side coverage with a radar-blocking field. Each box includes two complete Fenrir S2 Sniper Type kits with all weapons and armor, and the model supports four official configurations - Full Armor S1, Full Armor S2, Light Armor S1, and Enhanced Full Armor S2. Key Features Dual Head Sight System - Two interchangeable head-mounted sighting units: S1 optimized for conventional firearms targeting and S2 designed for electronic warfare and jamming resistance. Swapping between them changes the kit's visual profile and in-universe role Armadillo Layered Armor - Backpack-mounted articulated armor panels that fold out to provide wraparound coverage on one side of the body. In the standard configuration, the armor deploys on one side with a built-in radar-blocking field. Both sides can be armored simultaneously for full coverage, but this significantly restricts joint range of motion Four Official Configurations - Full Armor S1, Full Armor S2, Light Armor S1, and Enhanced Full Armor S2. Each configuration combines a different head sight with a different armor deployment, giving builders four distinct display options from one box Sniper Weapon Loadout - Dedicated long-range sniper rifle as the primary weapon, plus a secondary carbine and blade for close-quarters options 12 Runners with Single-Gate Layout - Two more runners than the Fenrir A6 Assault Type, with all parts arranged on single-gate connections for clean separation and minimal nub cleanup Two Complete Kits Per Box - Standard packaging includes two full Fenrir S2 Sniper Type units with all weapons, armor, and accessories Builder Context The Fenrir S2 Sniper Type is the most parts-dense kit in the 3MIN Project-A Fenrir series to date, with 12 runners compared to the Assault Type's 10. Assembly remains snap-fit with no tools or adhesives required, though build time will be longer than the Standard Type due to the Armadillo armor system and additional weapon parts. The 3mm port system is fully compatible with Bandai 30MM, Kotobukiya MSG, and other Sheik Mainland 3MIN series accessories. Builders familiar with the A2 Standard Type or A6 Assault Type will recognize the core frame - the new complexity comes from the armor deployment and configuration options layered on top of it. Why Build This Kit The Sheik Mainland Fenrir S2 Sniper Type is the first kit in the 3MIN Project-A series designed around asymmetric armor and role specialization rather than uniform coverage, which gives it a visual silhouette distinct from both the Standard Type and Assault Type even though all three share the same core frame. The Armadillo layered armor system is new to the Fenrir line and introduces a build-and-pose dynamic that the previous variants lack - configuring the armor panels across four official loadouts means the S2 has more meaningful display variety per unit than any other kit in the series. At the same price as the Fenrir A6 Assault Type with two more runners and the Armadillo armor system included, the S2 represents the highest parts count per dollar in the 3MIN Project-A line. Builders who already own the A2 or A6 will find the S2 visually distinct enough to display alongside them, and the shared 3mm hardpoints mean weapons and accessories are cross-compatible across all Fenrir variants. Box Contents 2x Fenrir S2 Sniper Type runner sets (12 runners per unit) S1 head sight (conventional firearms targeting) S2 head sight (electronic warfare / jamming resistance) Armadillo backpack-mounted layered armor system Sniper rifle Secondary carbine Blade weapon POK interchangeable hand types Assembly instructions Specifications Series 3MIN Project-A Scale 1/18 Height Approximately 11 cm Materials PS, POM (joints), POK (hand types) Runners 12 per unit Kit Count 2 per box Construction Snap-fit, no tools or adhesives required Head Sights S1 (conventional) and S2 (electronic warfare) Configurations Full Armor S1, Full Armor S2, Light Armor S1, Enhanced Full Armor S2 Compatibility 3mm universal hardpoints (30MM, MSG, Sheik Mainland 3MIN series) Manufacturer Sheik Mainland Preorder Notice:This item is currently on preorder and will be shipped once available. Please be aware that cancelling a preorder will incur a 25% restocking fee. For detailed information on our preorder and cancellation policies, please visit our FAQs page.

Overview The MUFS-S5 Fortress is a 1/60 scale mini mecha model kit from Sheik Mainland's 3MIN Project series - a line of compact, snap-fit original mecha designed for fast assembly and army building. Each box contains three identical Fortress units built from six runners (two per unit), allowing builders to field a full squad straight out of the box. The Fortress is the third mecha design in the 3MIN Project lineup and features an Armored Core-inspired artillery platform silhouette rather than a humanoid close-combat frame, with opening missile compartments on the shoulders and legs, a functional cockpit hatch, and dual handheld weapons per unit. Key Features Set of 3 Kits Per Box - Each box includes three identical Fortress units built from six runners (two per unit) for squad displays and army-building configurations Opening Missile Compartments - Hatches on both the shoulders and lower legs open to reveal 8-tube rocket pod interiors Dual Weapons Per Unit - Each Fortress includes one heavy cannon and one Gatling gun, totaling six weapons across the box for free mixing across units Opening Cockpit - The torso features a hinged cockpit hatch with interior detail, compatible with separately sold Sheik Mainland 3MIN Project pilot figures Full Ball Joint Articulation - All connection points use ball joints, providing head rotation, arm windmill, 90-degree-plus elbow and knee bends, waist tilt, and articulated rear thruster nozzles 3mm Modular Hardpoints - Multiple standardized connection points across the body for cross-compatible weapon and accessory mounting with other 3MIN Project releases Multiple Color and Material Options - Available in Metallic Black (POK material), Olive Drab (ABS), and City Gray (ABS) Builder Context The Fortress is a beginner-friendly snap-fit kit that requires no cement, paint, or specialized tools. Assembly is straightforward enough that most builders will not need the instructions by the second unit. Despite the simple structure, the mold precision is high and the parts are notably thick and dense compared to standard Bandai KPS plastic. Builders should be aware that some flash, mold lines, and minor plastic overflow are present and may need trimming with a hobby knife. One common assembly issue: the elbow ball joint sockets are left/right specific, but the manual does not clearly indicate this - installing them backwards will lock the shoulder's lateral movement, and the tight fit makes disassembly difficult. The mono-eye sensor and missile warheads benefit from color touch-up with a marker or brush for a finished look. Why Build This Kit The Sheik Mainland MUFS-S5 Fortress is one of the most cost-effective army-building options currently available in the North American mecha kit market, with three fully articulated 1/60 scale units included in a single box at a price comparable to one Bandai HG kit. The Fortress occupies a similar concept space to Bandai's 30 Minutes Missions line - quick-build, modular, customizable units - but delivers three kits per box instead of one and uses an Armored Core-inspired artillery walker design that stands out from the humanoid frames that dominate most mecha kit lines. At approximately 15 cm tall with opening missile compartments on the shoulders and legs, a hinged cockpit, and dual handheld weapons per unit, the Fortress packs a surprising amount of play value and display detail into a kit that builds in minutes. The 3MIN Project's standardized 3mm hardpoints make the Fortress compatible with vehicles, soldiers, and additional mech frames in the series, so it functions as an entry point into a modular ecosystem rather than a standalone purchase. Builders who also paint will find the Fortress especially appealing as a low-cost practice subject - the dense ABS plastic takes primer and paint well, and at three kits per box, there is room to experiment with different color schemes without high financial risk. Box Contents 6 runners (2 per unit, builds 3 identical Fortress kits) 6 weapons (1 heavy cannon + 1 Gatling gun per unit) Assembly instruction sheet (two-fold) Specifications Manufacturer Sheik Mainland Series 3MIN Project Model Number MUFS-S5 Product Name Fortress (要塞) Scale 1/60 Height Approximately 15 cm Materials ABS (Olive Drab, City Gray) / POK (Metallic Black) Runner Count 6 (2 per unit) Kit Count 3 per box Weapons 1 heavy cannon + 1 Gatling gun per unit (6 total) Assembly Type Snap-fit, no cement required Joint Type Ball joints throughout Compatibility 3mm connection standard (cross-compatible with 3MIN Project series) Box Dimensions Approximately 22 x 16.5 x 8.5 cm Box Weight Approximately 298g Country of Origin China Recommended Age 15+ Preorder Notice:This item is currently on preorder and will be shipped once available. Please be aware that cancelling a preorder will incur a 25% restocking fee. For detailed information on our preorder and cancellation policies, please visit our FAQs page.

Overview The Sheik Mainland 3MIN Project-A Fenrir A6 Assault Type is a 1/18 scale mecha model kit and the heavy-assault tactical variant of the original Fenrir A2 Standard Type. Roughly half the runners are entirely new molds, covering a redesigned head, chest armor, shoulder armor, shin armor, tactical comms backpack, skirt armor, and a significantly expanded weapon and hand type loadout. Each box includes two complete Fenrir A6 kits, and the model supports three official configurations - CQC (Battle Armor), LA (Light Assault), and FA (Full Armor) - plus an undocumented transformation into a mechanical locust form using the existing joints and armor structure. Key Features Three Official Configurations - CQC Battle Armor for maximum protection, LA Light Assault for mobility-focused loadouts, and FA Full Armor for the heaviest weapon and armor coverage. Standard Type shoulder and knee armor parts are included for additional light-configuration options 8 Pairs of Hand Types - Five pairs feature wrist lateral articulation for natural weapon-holding angles. Includes fist (with movable thumb), pointing/finger-gun (with movable thumb), open palm (with four-finger inward bend), angled-grip pairs in both square and round hole variants for different weapon handles, and one bonus pair of POK wrist reinforcement joints for long-term durability Expanded Heavy Weapon Loadout - Rocket launcher with detachable warhead and rotatable grip/scope, assault rifle, micro submachine gun, tactical machete, dagger, grenade, and arm shield. All weapons are cross-compatible with the Standard Type Fenrir Tactical Comms Backpack - Rear-mounted radio module that detaches as a standalone display prop. The antenna is made from flexible soft rubber to resist white stress marks and breakage during handling Improved Joint Tuning - Upper waist tightened, lower waist loosened, and hip ball joints recalibrated compared to the Standard Type. Joint damping is more consistent across the entire body, and the knee joint no longer risks stress marks from over-tight assembly Rear-Mounted Skirt Armor - Both halves pivot from the rear on ball joints, allowing them to swing clear for forward kicks, side kicks, and deep crouching poses. Front skirt is a separate piece that flips upward independently Two Complete Kits Per Box - Standard packaging includes two full Fenrir A6 units with all accessories Builder Context The Fenrir A6 Assault Type assembles in approximately 10-15 minutes per unit using optimized single-gate runner design with no tools, adhesives, or painting required. Build time is longer than the Standard Type due to the additional armor and weapon parts but remains beginner-friendly. The instruction manual has known diagram errors at step 5 (hip joint orientation shown inverted) and mislabeled part numbers on the arm assembly - builders should match parts by shape rather than relying solely on the printed part numbers. The 3mm port system is fully compatible with Bandai 30MM, Kotobukiya MSG, and other Sheik Mainland 3MIN series accessories including the Xenostrike, Xentinel, and Worker Bee lines. Why Build This Kit The Sheik Mainland Fenrir A6 Assault Type is the recommended starting point for the 3MIN Project-A series if choosing between the A6 and the Standard Type, because it delivers significantly more accessories, improved joint tuning, and greater configuration variety at the same price tier. Chinese reviewer consensus from multiple July 2026 build videos confirms that the A6's wrist lateral articulation - present on five of the eight hand pairs - resolves the most common complaint about 1/18 scale kits: unnatural weapon-holding angles, particularly with longer rifles. At approximately 11 cm tall, the Fenrir A6 packs articulation density comparable to Bandai's RG line into a kit that costs under $15 per unit (two per box), making it one of the highest value-to-articulation ratios currently available from any manufacturer at any scale. The A6 does not replace the A2 Standard Type - the two designs are visually distinct enough to display well together, and the A6 includes the Standard Type's original shoulder and knee armor as alternate parts. Builders should note that the A6 does not include the small display stand that comes with the Standard Type, and the thicker shin armor slightly reduces maximum knee bend compared to the A2. Box Contents 2x Fenrir A6 Assault Type runner sets (approximately half new-mold runners) New-mold head, chest armor, shoulder armor, shin armor, and knee armor parts Standard Type shoulder armor and knee armor parts (for light configuration) Tactical comms backpack with detachable radio module and soft rubber antenna Rear-mounted skirt armor with ball-joint pivot assembly Rocket launcher (detachable warhead, rotatable grip and scope) Assault rifle Micro submachine gun Tactical machete Dagger Grenade Arm shield 8 pairs of hand types (5 with wrist lateral articulation, 1 POK reinforcement pair) Shoulder-mounted weapon hardpoint adapters Ball-joint to straight-peg connector adapters Angled connector adapters (for offset shield mounting) Assembly instructions Specifications Series 3MIN Project-A Scale 1/18 Height Approximately 11 cm (head height) Materials PS, POK (composite joints and bonus wrist joints), soft rubber (backpack antenna) Kit Count 2 per box Assembly Time Approximately 10-15 minutes per unit Construction Snap-fit, no tools or adhesives required Configurations CQC (Battle Armor), LA (Light Assault), FA (Full Armor) Hand Types 8 pairs (5 with wrist lateral articulation) Compatibility 3mm universal hardpoints (30MM, MSG, Sheik Mainland 3MIN series) Display Stand Not included Release July 2026 Manufacturer Sheik Mainland Preorder Notice:This item is currently on preorder and will be shipped once available. Please be aware that cancelling a preorder will incur a 25% restocking fee. For detailed information on our preorder and cancellation policies, please visit our FAQs page.

Overview The Sheik Mainland 3MIN Project-A 1/18 Fenrir A2 Standard Type is a compact, highly articulated mecha model kit from Sheik Mainland's original 3MIN Project series. Available in five colorways - Blue, Green, Yellow, Purple, and Limited Metallic Black - each box contains two identical Fenrir A2 units with weapons and a display stand. The Fenrir A2 features a near-future realistic design aesthetic with 42 points of articulation driven by durable POM (polyoxymethylene) joints, delivering articulation ranges that exceed most kits in this size class. Key Features Two Complete Kits Per Box: Each box includes two identical Fenrir A2 units in the selected colorway, enabling squad displays, kitbashing, or spare parts for customization. 42-Point Articulation with POM Joints: Durable polyoxymethylene joints throughout provide smooth, tight movement - arm swing exceeds 180 degrees, knee bend reaches 150 degrees, elbow bend reaches 135 degrees, and waist side-tilt approaches 90 degrees. Weapon Loadout: Each unit includes four guns (with linkable rifle magazines), one dagger, and four weapon mount connectors for hardpoint storage across the body. Four Interchangeable Hand Types: Open palm, grip, fist, and flat/barrier hands included per unit for a wide range of posing options. 3mm Universal Connection Ports: Standard 3mm hardpoints distributed across the body enable compatibility with 30MM, MSG, and other popular aftermarket accessory lines. Hidden Gate Mark Design: Many parts feature single gate points placed at connection seams, minimizing visible nub marks without additional cleanup. Builder Context The Fenrir A2 is designed for absolute beginners and assembles in approximately three minutes with snap-fit construction requiring no tools, adhesives, or painting. The 3mm port system and compact form factor also make it a strong customization base for experienced builders familiar with Bandai's 30 Minutes Missions line or Kotobukiya's MSG accessories. Why Build This Kit The Sheik Mainland 3MIN Project-A Fenrir A2 is the most accessible entry point into the third-party mecha kit category, with a sub-$30 price point that includes two complete units per box. Its 42-point POM articulation system delivers joint ranges that rival Bandai's RG line despite the kit's compact 11 cm height, making it one of the highest articulation-to-size ratios available in any current model kit. The 3mm universal hardpoints make every Fenrir A2 immediately compatible with 30MM and MSG weapon and armor accessories, which means builders can start customizing without committing to a more expensive or complex kit first. At roughly the same price as a single Bandai HG kit, the two-unit box format gives the Fenrir A2 a value proposition that no other 1/18 mecha kit currently matches in the North American market. Box Contents Fenrir A2 Standard Type model kit x 2 Guns x 4 (per unit, with linkable rifle magazines) Dagger x 1 (per unit) Weapon mount connectors x 4 (per unit) Interchangeable hands x 4 types (per unit): open palm, grip, fist, flat/barrier Display stand Assembly instructions Specifications Series 3MIN Project-A Scale 1/18 Height Approx. 11 cm (4.33 in) Material ABS, POM (joints) Articulation 42 points Compatibility 3mm connection ports (30MM, MSG compatible) Available Colorways Blue, Green, Yellow, Purple, Limited Metallic Black Manufacturer Sheik Mainland Country of Origin China Age Recommendation 15+

The Sheik Mainland 1/144 MAC18 Super Cavalry Wolf Spider Squad is a set of three multi-legged mecha model kits from the Ultra Action Trooper series. Each unit is based on a wolf spider (Lycosidae) motif, translating the predatory silhouette and low-profile stance of the arachnid into a compact tactical mech platform. Sheik Mainland (also known as Chief Continent / Chieftain Continent) is a Chinese manufacturer known for accessible, customization-friendly mecha kits with high parts compatibility across the 30MM and MSG ecosystems. Key Features Three Complete Mechs Per Box - Each box contains parts to build three individual wolf spider mech units, making this a squad-based kit out of the box. Three Weapon Types Per Unit - Each mech can be equipped with one of three weapon loadouts: rocket launcher, drone, or cannon. The kit includes five sets of each weapon type, leaving two spare sets after equipping all three mechs for custom dual-weapon configurations. Wolf Spider (Lycosidae) Design - Multi-legged mech silhouette based on the wolf spider, with a wrap-around front face panel that eliminates visible center seam lines. Snap-Fit ABS Construction - Molded in ABS plastic for tool-free snap-fit assembly. Seam lines are engineered to sit on the interior side of the body for a clean exterior finish. Customization-Ready Body - The rear and both side panels are suitable locations for drilling 3mm ports, enabling compatibility with 30MM, MSG, and other standard aftermarket accessory lines. Water Slide Decal Sheet Included - Comes with a decal sheet for additional military-style detailing across all three units. Multiple Color Versions Available - The MAC18 Wolf Spider Squad is available in multiple colorways. Select your preferred version from the dropdown menu. Builder Context The MAC18 Wolf Spider Squad is suited for beginners and experienced builders alike. Each individual mech takes approximately one hour to assemble with no tools or adhesive required. The small scale and low part count make this an accessible entry point for first-time builders, while the spare weapon parts and 3mm-compatible body panels give experienced customizers material to work with for kitbashing and custom loadout configurations. Why Build This Kit The Sheik Mainland MAC18 Wolf Spider Squad is one of the few 1/144-scale non-humanoid mecha kits currently available from any manufacturer, making it a distinctive display piece alongside standard bipedal Gunpla and third-party kits. At three units per box with five weapon sets, the kit offers genuine army-building value - builders can field a full squad from a single purchase or combine multiple color versions for a mixed-unit display. The weapon surplus (two extra sets of each type after equipping all three mechs) supports custom dual-cannon or dual-drone configurations without requiring additional purchases. For builders familiar with Bandai's 30 Minutes Missions line, the Wolf Spider occupies a similar customization-first philosophy at a lower price point and smaller footprint, though it trades the humanoid frame's poseability for a more static but visually unique spider-form factor. The wrap-around front panel design that eliminates the center seam line is a construction detail typically seen on more expensive kits. Box Contents Parts to build three wolf spider mech units Five weapon assemblies per type (rocket launcher, drone, cannon) Water slide decal sheet Collector card Instruction manual Brand Sheik Mainland Series Ultra Action Trooper - Super Cavalry Product Name MAC18 Super Cavalry Wolf Spider Squad Scale 1/144 Material ABS Set Contents 3 wolf spider mechs, 5 sets of 3 weapon types Assembly Snap-fit, no tools or adhesive required Approx. Build Time ~1 hour per unit Manufacturer Sheik Mainland Country of Origin China Age Recommendation 15+