Premium Model Paints for Hobbyists

Tamiya TS-80 Flat Clear Lacquer Spray 100ml The Tamiya TS-80 Flat Clear is a 100ml synthetic lacquer spray paint designed for use on plastic model kits and large model surfaces. It provides a flat (matte) clear top coat finish, allowing modelers to convert glossy paint finishes to a final flat look. Key Features Flat Clear Finish: Provides a matte top coat over cured paint finishes. Synthetic Lacquer Formula: Fast-curing synthetic lacquer suitable for large model surfaces. Compatible with Acrylics and Enamels: Not affected by acrylic or enamel paints, allowing detail work with those mediums after application. 100ml Can Coverage: Each can contains enough paint to fully cover approximately 2–3 1/24 scale car model bodies. Gloss-to-Flat Conversion: Useful for achieving a flat finish over glossy paint finishes. Not for Polycarbonate: Not designed for use on clear polycarbonate/Lexan R/C body shells; Tamiya PS sprays should be used for those applications. Usage Notes Allow the underlying paint to fully cure before applying TS-80 to prevent cracking from differing cure rates. Best results are achieved by allowing up to one week of cure time. Test over decals before applying to a finished project, as clear coat can affect some decals. Specifications Brand Tamiya Product Code TS-80 (Item No. 85080) Color Flat Clear Type Synthetic Lacquer Spray Volume 100ml Finish Flat (Matte) Intended Use Plastic model kits and large model surfaces

Tamiya TS-79 Semi Gloss Clear Lacquer Spray 100ml The Tamiya TS-79 Semi Gloss Clear is a 100ml synthetic lacquer spray paint designed for use on plastic model kits and large model surfaces. It provides a semi-gloss clear top coat finish, allowing modelers to convert gloss paint finishes to a semi-gloss appearance. Key Features Semi-Gloss Clear Finish: Provides a semi-gloss top coat over cured paint finishes. Synthetic Lacquer Formula: Fast-curing synthetic lacquer suitable for large model surfaces. Compatible with Acrylics and Enamels: Not affected by acrylic or enamel paints, allowing detail work with those mediums after application. 100ml Can Coverage: Each can contains enough paint to fully cover approximately 2–3 1/24 scale car model bodies. Gloss-to-Semi-Gloss Conversion: Useful for achieving a semi-gloss finish on paints that are only available in gloss. Not for Polycarbonate: Not designed for use on clear polycarbonate/Lexan R/C body shells; Tamiya PS sprays should be used for those applications. Usage Notes Allow the underlying paint to fully cure before applying TS-79 to prevent cracking from differing cure rates. Best results are achieved by allowing up to one week of cure time. Test over decals before applying to a finished project, as clear coat can affect some decals. Specifications Brand Tamiya Product Code TS-79 (Item No. 85079) Color Semi Gloss Clear Type Synthetic Lacquer Spray Volume 100ml Finish Semi-Gloss Intended Use Plastic model kits and large model surfaces

Tamiya LP Lacquer Paint (10ml) Tamiya LP Lacquer Paints are solvent-based model paints packaged in 10ml glass bottles, formulated for use on plastic model kits, figures, and scale modeling projects. The LP series is designed for both airbrush and hand brush application, offering fast drying times and a tough paint film suitable for use as a basecoat under Tamiya enamel paints. Key Features Versatile Application: Suitable for airbrushing larger surfaces as well as hand brushing fine details. Fast Drying: Quick-drying formula allows for efficient layering and reduced wait times between coats. Durable Paint Film: Tough lacquer membrane resists damage from subsequent enamel paint layers, making it ideal as a basecoat. Enamel Compatible: Works as a foundation layer beneath Tamiya enamel paints without lifting or reacting. Thinner Compatibility: Formulated for use with Tamiya Lacquer Thinner (item 87077). Glass Bottle Packaging: 10ml (1/3 fl oz) glass bottle with screw cap for storage and shelf life. Usage Notes Use in a well-ventilated area; lacquer paints contain strong solvents. Thin with Tamiya Lacquer Thinner for airbrush application. Colors may vary slightly from Tamiya acrylic or spray paints sharing the same name. Specifications Brand Tamiya Product Line LP Lacquer Paint Volume 10ml (1/3 fl oz) Paint Type Solvent-based lacquer Container Glass bottle Application Airbrush and hand brush Recommended Thinner Tamiya Lacquer Thinner (87077) Intended Use Plastic model kits and scale modeling

Tamiya LP Lacquer Paint (10ml) Tamiya LP Lacquer Paints are solvent-based model paints packaged in 10ml glass bottles, formulated for use on plastic model kits, figures, and scale modeling projects. The LP series is designed for both airbrush and hand brush application, offering fast drying times and a tough paint film suitable for use as a basecoat under Tamiya enamel paints. Key Features Versatile Application: Suitable for airbrushing larger surfaces as well as hand brushing fine details. Fast Drying: Quick-drying formula allows for efficient layering and reduced wait times between coats. Durable Paint Film: Tough lacquer membrane resists damage from subsequent enamel paint layers, making it ideal as a basecoat. Enamel Compatible: Works as a foundation layer beneath Tamiya enamel paints without lifting or reacting. Thinner Compatibility: Formulated for use with Tamiya Lacquer Thinner (item 87077). Glass Bottle Packaging: 10ml (1/3 fl oz) glass bottle with screw cap for storage and shelf life. Usage Notes Use in a well-ventilated area; lacquer paints contain strong solvents. Thin with Tamiya Lacquer Thinner for airbrush application. Colors may vary slightly from Tamiya acrylic or spray paints sharing the same name. Specifications Brand Tamiya Product Line LP Lacquer Paint Volume 10ml (1/3 fl oz) Paint Type Solvent-based lacquer Container Glass bottle Application Airbrush and hand brush Recommended Thinner Tamiya Lacquer Thinner (87077) Intended Use Plastic model kits and scale modeling

Tamiya LP Lacquer Paint (10ml) Tamiya LP Lacquer Paints are solvent-based model paints packaged in 10ml glass bottles, formulated for use on plastic model kits, figures, and scale modeling projects. The LP series is designed for both airbrush and hand brush application, offering fast drying times and a tough paint film suitable for use as a basecoat under Tamiya enamel paints. Key Features Versatile Application: Suitable for airbrushing larger surfaces as well as hand brushing fine details. Fast Drying: Quick-drying formula allows for efficient layering and reduced wait times between coats. Durable Paint Film: Tough lacquer membrane resists damage from subsequent enamel paint layers, making it ideal as a basecoat. Enamel Compatible: Works as a foundation layer beneath Tamiya enamel paints without lifting or reacting. Thinner Compatibility: Formulated for use with Tamiya Lacquer Thinner (item 87077). Glass Bottle Packaging: 10ml (1/3 fl oz) glass bottle with screw cap for storage and shelf life. Usage Notes Use in a well-ventilated area; lacquer paints contain strong solvents. Thin with Tamiya Lacquer Thinner for airbrush application. Colors may vary slightly from Tamiya acrylic or spray paints sharing the same name. Specifications Brand Tamiya Product Line LP Lacquer Paint Volume 10ml (1/3 fl oz) Paint Type Solvent-based lacquer Container Glass bottle Application Airbrush and hand brush Recommended Thinner Tamiya Lacquer Thinner (87077) Intended Use Plastic model kits and scale modeling

Tamiya XF-86 Flat Clear Acrylic Mini Paint (10ml) The Tamiya XF-86 Flat Clear is a 10ml water-soluble acrylic paint from Tamiya's Acrylic Mini lineup, formulated to apply a matte finish coat over painted or bare model surfaces. As part of Tamiya's XF flat-finish series, it is suitable for both brush painting and airbrushing across a wide range of modeling materials. Key Features Flat Clear Finish: XF-designated flat topcoat for applying a matte finish to finished models. Water-Soluble Acrylic Formula: Made from water-soluble acrylic resins; uncured paint can be cleaned up with water. Brush and Airbrush Compatible: Flows smoothly and covers evenly for both application methods. Wide Material Compatibility: Suitable for styrene resins, Styrofoam, wood, and common model plastics. Thinner Compatibility: Can be thinned for airbrushing with Tamiya X-20A Acrylic Thinner or Tamiya Lacquer Thinner. Mini Bottle Size: 10ml glass jar, ideal for small projects and detail work. Specifications Brand Tamiya Product Line Tamiya Color Acrylic Mini Item Number 81786 Color Code XF-86 Color Flat Clear Finish Flat / Matte Paint Type Water-soluble acrylic Volume 10ml Application Brush painting and airbrushing Recommended Thinner Tamiya X-20A Acrylic Thinner or Tamiya Lacquer Thinner

Splash Paints SP-072 2K Gloss Black The Splash Paints SP-072 2K Gloss Black is a two-component urethane color coat designed for airbrush application on scale models, Gunpla, and 3D prints. Functioning as both a standalone gloss black finish and an ideal base coat for metalizer or metallic paint application, this 2K formula produces a non-shrinking, high-gloss surface that is extremely UV stable and resistant to fading. Each set includes a 30 ml (1 oz) Gloss Black bottle and a 10 ml (0.3 oz) catalyst bottle, mixed at a 4:1 ratio before application. Key Features Two-Component Urethane Formula: Requires mixing color with included catalyst at a 4:1 ratio before spraying. Non-Shrinking Surface: Maintains maximum gloss level with no shrinkage during curing. Extremely UV Stable: Resistant to fading for long-term display durability. No Polishing Required: Produces a high-gloss finish without the need for polishing when applied properly. Cut and Buff Compatible: Can be sanded and buffed after curing without losing gloss level. Ideal Metalizer Base: Serves as a recommended gloss black base coat for Splash Paints Metalizer Series and other metallic paints. Flash off for 5 minutes, then spray metallic while the surface is still wet. Cure Time: 48–72 hours at room temperature, or 60 minutes in a dehydrator at 120°F after cooldown. Application Notes 1st coat: Medium coat. Flash off 5–10 minutes. 2nd coat: Medium to wet coat. Flash off 5–10 minutes. 3rd coat: Wet coat. Flash off 15 minutes prior to baking cycle or air dry. For metallic application over gloss black: flash off for 5 minutes after final coat, then spray metallic while the surface is still wet. Allow 24 hours cure time before handling. Catalyst contains isocyanate. An organic vapor respirator must be worn during use. Use in a well-ventilated area only. Product is flammable and must be kept away from all heat sources. Included Components Gloss Black: 30 ml (1 oz) Catalyst: 10 ml (0.3 oz) Specifications Brand Splash Paints SKU SP-072 Product Type 2K Urethane Gloss Black Color Coat Formula Two-component (color + catalyst) Application Airbrush only Mixing Ratio 4:1 (color to catalyst) Color Volume 30 ml (1 oz) Catalyst Volume 10 ml (0.3 oz) Cure Time 48–72 hours at room temperature; 60 minutes in dehydrator at 120°F UV Stability Extremely UV stable, resistant to fading Country of Origin USA

Splash Paints 2K Ultra Clear Coat The Splash Paints 2K Ultra Clear is a two-component urethane clear coat designed for airbrush application as a final protective top coat on scale models, Gunpla, and 3D prints. Available in Gloss and Matte finishes, this high-solid clear coat provides enhanced self-leveling, increased UV stabilization, and zero clear coat shrinkage during curing. Each set includes a 30 ml (1 oz) clear coat bottle and a 10 ml (0.3 oz) catalyst bottle, mixed at a 3:1 ratio before application. Key Features Two-Component Urethane Formula: Requires mixing clear coat with included catalyst at a 3:1 ratio before spraying. High-Solid Clear Coat: Enhanced self-leveling properties produce an orange-peel-free finish. UV Stabilized: Rated for outdoor durability of 10+ years with no yellowing or degradation. No Shrinkage: Zero clear coat shrinkage during curing for a consistent final surface. Cut and Buff Compatible (Gloss): The 2K Ultra Gloss can be cut and buffed after curing without losing shine. Two Finish Options: Ultra Gloss for high-shine finishes and Ultra Matte for flat finishes. Cure Time: 48–72 hours at room temperature, or 60 minutes in a dehydrator at 120°F after cooldown. Application Notes (Gloss) 1st coat: Light coat. Flash off 5–10 minutes. 2nd coat: Medium to wet coat. Flash off 5–10 minutes. 3rd coat: Wet coat. Flash off 5–10 minutes. Application Notes (Matte) 1st coat: Tack coat. Flash off 5 minutes. 2nd coat: Wet coat. Flash off 5 minutes. Do not exceed 2 coats. Additional layers will make the surface glossy. Included Components Clear Coat: 30 ml (1 oz) Catalyst: 10 ml (0.3 oz) Specifications Brand Splash Paints Product Type 2K Urethane Clear Coat Formula Two-component (clear coat + catalyst) Application Airbrush only Mixing Ratio 3:1 (clear coat to catalyst); up to 0.5 parts thinner optional Clear Coat Volume 30 ml (1 oz) Catalyst Volume 10 ml (0.3 oz) Finishes Available Ultra Gloss, Ultra Matte Cure Time 48–72 hours at room temperature; 60 minutes in dehydrator at 120°F UV Rating 10+ years outdoor rated Country of Origin USA

Splash Paints 2K Urethane Primer The Splash Paints 2K Primer is a two-component urethane primer designed for airbrush application on scale models, Gunpla, and 3D prints. Available in White (SPP-001), Grey (SPP-002), and Black (SPP-003), this 2K primer provides superior durability and adhesion compared to single-component primers. Each set includes a 60 ml (2 oz) urethane primer bottle and a 15 ml (0.5 oz) urethane catalyst bottle, requiring thorough mixing before application. Key Features Two-Component Urethane Formula: Requires mixing primer with included catalyst before spraying for enhanced durability. Superior Surface Preparation: Apply over surfaces sanded to at least #800–#1000 grit for optimal adhesion. Fast Cure Time: 3–4 hours at room temperature, or 10–15 minutes at 140°F in a dehydrator. Sandable Finish: Wet-sand with #1500–2000 grit after curing for a smooth surface before basecoat application. Three Color Options: White, Grey, and Black to accommodate different basecoat color requirements. Recommended PSI: 20–30 PSI. Apply medium to wet coats in multiple passes. Recommended Nozzle Size: 0.35 mm or larger for primer application. Pot Life: Approximately 2 hours after mixing. Clean all product from airbrush immediately after use. Application Notes Coat 1: Medium wet passes. Coat 2: Wet passes. Coat 3: Additional wet passes if necessary. After curing, wet-sand the entire surface with #1500–2000 grit before applying any base coats. Catalyst contains isocyanate. An organic vapor respirator (such as 3M 60921) must be worn during use. Use in a well-ventilated area only. Product is flammable and must be kept away from all heat sources. Included Components Urethane Primer: 60 ml (2 oz) Urethane Catalyst: 15 ml (0.5 oz) Specifications Brand Splash Paints Product Type 2K Urethane Primer Formula Two-component (primer + catalyst) Application Airbrush only Primer Volume 60 ml (2 oz) Catalyst Volume 15 ml (0.5 oz) Colors Available White (SPP-001), Grey (SPP-002), Black (SPP-003) Thinning Required No (pre-thinned; catalyst mixing required) Recommended PSI 20–30 PSI Recommended Nozzle 0.35 mm or larger Cure Time 3–4 hours at room temperature; 10–15 minutes at 140°F in dehydrator Pot Life Approx. 2 hours after mixing Country of Origin USA

Splash Paints 2K Urethane Primer The Splash Paints 2K Primer is a two-component urethane primer designed for airbrush application on scale models, Gunpla, and 3D prints. Available in White (SPP-001), Grey (SPP-002), and Black (SPP-003), this 2K primer provides superior durability and adhesion compared to single-component primers. Each set includes a 60 ml (2 oz) urethane primer bottle and a 15 ml (0.5 oz) urethane catalyst bottle, requiring thorough mixing before application. Key Features Two-Component Urethane Formula: Requires mixing primer with included catalyst before spraying for enhanced durability. Superior Surface Preparation: Apply over surfaces sanded to at least #800–#1000 grit for optimal adhesion. Fast Cure Time: 3–4 hours at room temperature, or 10–15 minutes at 140°F in a dehydrator. Sandable Finish: Wet-sand with #1500–2000 grit after curing for a smooth surface before basecoat application. Three Color Options: White, Grey, and Black to accommodate different basecoat color requirements. Recommended PSI: 20–30 PSI. Apply medium to wet coats in multiple passes. Recommended Nozzle Size: 0.35 mm or larger for primer application. Pot Life: Approximately 2 hours after mixing. Clean all product from airbrush immediately after use. Application Notes Coat 1: Medium wet passes. Coat 2: Wet passes. Coat 3: Additional wet passes if necessary. After curing, wet-sand the entire surface with #1500–2000 grit before applying any base coats. Catalyst contains isocyanate. An organic vapor respirator (such as 3M 60921) must be worn during use. Use in a well-ventilated area only. Product is flammable and must be kept away from all heat sources. Included Components Urethane Primer: 60 ml (2 oz) Urethane Catalyst: 15 ml (0.5 oz) Specifications Brand Splash Paints Product Type 2K Urethane Primer Formula Two-component (primer + catalyst) Application Airbrush only Primer Volume 60 ml (2 oz) Catalyst Volume 15 ml (0.5 oz) Colors Available White (SPP-001), Grey (SPP-002), Black (SPP-003) Thinning Required No (pre-thinned; catalyst mixing required) Recommended PSI 20–30 PSI Recommended Nozzle 0.35 mm or larger Cure Time 3–4 hours at room temperature; 10–15 minutes at 140°F in dehydrator Pot Life Approx. 2 hours after mixing Country of Origin USA

Splash Paints 1K Acrylic Lacquer Primer The Splash Paints 1K Primer is a single-component acrylic lacquer primer designed for airbrush application on plastic model kits, resin parts, and 3D prints. Available in four colors — White, Light Grey, Dark Grey, and Black — the 1K Primer is a ready-to-use surfacer that fills scratches as fine as #800 grit and provides a smooth foundation for basecoat application. Each bottle contains 60 ml (2 oz) of pre-thinned primer with no catalyst or mixing required. Key Features Single-Component Formula: No catalyst or activator required. Ready to use directly from the bottle. Pre-Thinned and Airbrush-Ready: No additional thinning needed. Shake, load, and spray. Surfacer Capability: Fills scratches down to #800 grit for a smooth surface before basecoat application. Fast Dry Time: Ready to sand in under 2 hours at room temperature, or 5–10 minutes with a dehydrator. Air Dry Recommended: Heat cure at temperatures below 120°F if using a dehydrator. Ideal for Plastics and Resin: Formulated specifically for plastic model kits and resin media. Recommended PSI: 20–25 PSI. Apply wet layers for optimal film build. Recommended Nozzle Size: 0.35 mm or larger for primer application. Four Color Options: White, Light Grey, Dark Grey, and Black to suit different basecoat requirements. Application Notes Apply at least 2–3 coats for optimal film thickness prior to basecoat application. Flash off until matte between coats. Wet-sand with #1500–2000 grit before applying basecoat for a smooth finish. The White primer has an off-white finish; bright colors may require a pure white base coat after priming. A respirator must be worn during use. Product is flammable and must be kept away from all heat sources. Specifications Brand Splash Paints Product Type 1K Acrylic Lacquer Primer (Surfacer) Formula Single-component (no catalyst required) Application Airbrush only Volume 60 ml (2 oz) per bottle Colors Available White, Light Grey, Dark Grey, Black Thinning Required No (pre-thinned) Recommended PSI 20–25 PSI Recommended Nozzle 0.35 mm or larger Dry Time Under 2 hours at room temperature; 5–10 minutes with dehydrator Compatible Media Plastic, resin Country of Origin USA

Splash Paints 1K Acrylic Lacquer Primer The Splash Paints 1K Primer is a single-component acrylic lacquer primer designed for airbrush application on plastic model kits, resin parts, and 3D prints. Available in four colors — White, Light Grey, Dark Grey, and Black — the 1K Primer is a ready-to-use surfacer that fills scratches as fine as #800 grit and provides a smooth foundation for basecoat application. Each bottle contains 60 ml (2 oz) of pre-thinned primer with no catalyst or mixing required. Key Features Single-Component Formula: No catalyst or activator required. Ready to use directly from the bottle. Pre-Thinned and Airbrush-Ready: No additional thinning needed. Shake, load, and spray. Surfacer Capability: Fills scratches down to #800 grit for a smooth surface before basecoat application. Fast Dry Time: Ready to sand in under 2 hours at room temperature, or 5–10 minutes with a dehydrator. Air Dry Recommended: Heat cure at temperatures below 120°F if using a dehydrator. Ideal for Plastics and Resin: Formulated specifically for plastic model kits and resin media. Recommended PSI: 20–25 PSI. Apply wet layers for optimal film build. Recommended Nozzle Size: 0.35 mm or larger for primer application. Four Color Options: White, Light Grey, Dark Grey, and Black to suit different basecoat requirements. Application Notes Apply at least 2–3 coats for optimal film thickness prior to basecoat application. Flash off until matte between coats. Wet-sand with #1500–2000 grit before applying basecoat for a smooth finish. The White primer has an off-white finish; bright colors may require a pure white base coat after priming. A respirator must be worn during use. Product is flammable and must be kept away from all heat sources. Specifications Brand Splash Paints Product Type 1K Acrylic Lacquer Primer (Surfacer) Formula Single-component (no catalyst required) Application Airbrush only Volume 60 ml (2 oz) per bottle Colors Available White, Light Grey, Dark Grey, Black Thinning Required No (pre-thinned) Recommended PSI 20–25 PSI Recommended Nozzle 0.35 mm or larger Dry Time Under 2 hours at room temperature; 5–10 minutes with dehydrator Compatible Media Plastic, resin Country of Origin USA

Splash Paints 1K Acrylic Lacquer Primer The Splash Paints 1K Primer is a single-component acrylic lacquer primer designed for airbrush application on plastic model kits, resin parts, and 3D prints. Available in four colors — White, Light Grey, Dark Grey, and Black — the 1K Primer is a ready-to-use surfacer that fills scratches as fine as #800 grit and provides a smooth foundation for basecoat application. Each bottle contains 60 ml (2 oz) of pre-thinned primer with no catalyst or mixing required. Key Features Single-Component Formula: No catalyst or activator required. Ready to use directly from the bottle. Pre-Thinned and Airbrush-Ready: No additional thinning needed. Shake, load, and spray. Surfacer Capability: Fills scratches down to #800 grit for a smooth surface before basecoat application. Fast Dry Time: Ready to sand in under 2 hours at room temperature, or 5–10 minutes with a dehydrator. Air Dry Recommended: Heat cure at temperatures below 120°F if using a dehydrator. Ideal for Plastics and Resin: Formulated specifically for plastic model kits and resin media. Recommended PSI: 20–25 PSI. Apply wet layers for optimal film build. Recommended Nozzle Size: 0.35 mm or larger for primer application. Four Color Options: White, Light Grey, Dark Grey, and Black to suit different basecoat requirements. Application Notes Apply at least 2–3 coats for optimal film thickness prior to basecoat application. Flash off until matte between coats. Wet-sand with #1500–2000 grit before applying basecoat for a smooth finish. The White primer has an off-white finish; bright colors may require a pure white base coat after priming. A respirator must be worn during use. Product is flammable and must be kept away from all heat sources. Specifications Brand Splash Paints Product Type 1K Acrylic Lacquer Primer (Surfacer) Formula Single-component (no catalyst required) Application Airbrush only Volume 60 ml (2 oz) per bottle Colors Available White, Light Grey, Dark Grey, Black Thinning Required No (pre-thinned) Recommended PSI 20–25 PSI Recommended Nozzle 0.35 mm or larger Dry Time Under 2 hours at room temperature; 5–10 minutes with dehydrator Compatible Media Plastic, resin Country of Origin USA

Splash Paints Metalizer Series Lacquer Airbrush Paint The Splash Paints Metalizer Series is a line of ultra-fine metallic flake lacquer paints formulated for airbrush application on scale models, Gunpla, and 3D prints. Featuring 11 metallic colors including Aluminium, Gunmetal, Titanium, Gold, Copper, and Magnesium, the Metalizer Series produces realistic metal-like finishes with high pigment density. All Metalizer paints are pre-thinned, airbrush-ready, and supplied in 30 ml (1 oz) bottles with shaker balls. Key Features Ultra-Fine Metallic Flakes: Precision-sized particles produce realistic metal finishes suitable for scale modeling. High Pigment Density: Updated formula with increased pigment levels for enhanced coverage and color accuracy. Pre-Thinned and Airbrush-Ready: No additional thinning required. Shake, load, and spray directly from the bottle. Must Be Applied Over Black Base: Requires black primer or base coat for best results. Splash Paints 1K Black Primer, 2K Black Primer, or a gloss black base coat is recommended. Clear Coat Required: Without a gloss clear coat, metalizer colors may appear differently than intended. Recommended PSI: 25–30 PSI. Apply thin layers only and avoid wet coats. Recommended Nozzle Size: 0.3 mm airbrush nozzle for color application. Durable Finish: Metalizer finishes are handleable once cured. Application Notes Apply thin layers over black primer or base coat. Flash off until matte between coats. Avoid spraying wet coats. Light passes produce the best metallic effect. A gloss clear coat (such as Splash Paints 2K Ultra Clear) should be applied to protect the finish and achieve intended appearance. A respirator must be worn during use. Product is flammable and must be kept away from all heat sources. Specifications Brand Splash Paints Series Metalizer Series Paint Type Acrylic lacquer with metallic flakes Application Airbrush only Volume 30 ml (1 oz) per bottle Colors Available 11 Thinning Required No (pre-thinned) Recommended PSI 25–30 PSI Recommended Nozzle 0.3 mm Base Coat Required Yes (black primer or gloss black) Clear Coat Required Yes Country of Origin USA

Splash Paints Metalizer Series Lacquer Airbrush Paint The Splash Paints Metalizer Series is a line of ultra-fine metallic flake lacquer paints formulated for airbrush application on scale models, Gunpla, and 3D prints. Featuring 11 metallic colors including Aluminium, Gunmetal, Titanium, Gold, Copper, and Magnesium, the Metalizer Series produces realistic metal-like finishes with high pigment density. All Metalizer paints are pre-thinned, airbrush-ready, and supplied in 30 ml (1 oz) bottles with shaker balls. Key Features Ultra-Fine Metallic Flakes: Precision-sized particles produce realistic metal finishes suitable for scale modeling. High Pigment Density: Updated formula with increased pigment levels for enhanced coverage and color accuracy. Pre-Thinned and Airbrush-Ready: No additional thinning required. Shake, load, and spray directly from the bottle. Must Be Applied Over Black Base: Requires black primer or base coat for best results. Splash Paints 1K Black Primer, 2K Black Primer, or a gloss black base coat is recommended. Clear Coat Required: Without a gloss clear coat, metalizer colors may appear differently than intended. Recommended PSI: 25–30 PSI. Apply thin layers only and avoid wet coats. Recommended Nozzle Size: 0.3 mm airbrush nozzle for color application. Durable Finish: Metalizer finishes are handleable once cured. Application Notes Apply thin layers over black primer or base coat. Flash off until matte between coats. Avoid spraying wet coats. Light passes produce the best metallic effect. A gloss clear coat (such as Splash Paints 2K Ultra Clear) should be applied to protect the finish and achieve intended appearance. A respirator must be worn during use. Product is flammable and must be kept away from all heat sources. Specifications Brand Splash Paints Series Metalizer Series Paint Type Acrylic lacquer with metallic flakes Application Airbrush only Volume 30 ml (1 oz) per bottle Colors Available 11 Thinning Required No (pre-thinned) Recommended PSI 25–30 PSI Recommended Nozzle 0.3 mm Base Coat Required Yes (black primer or gloss black) Clear Coat Required Yes Country of Origin USA

Splash Paints Metalizer Series Lacquer Airbrush Paint The Splash Paints Metalizer Series is a line of ultra-fine metallic flake lacquer paints formulated for airbrush application on scale models, Gunpla, and 3D prints. Featuring 11 metallic colors including Aluminium, Gunmetal, Titanium, Gold, Copper, and Magnesium, the Metalizer Series produces realistic metal-like finishes with high pigment density. All Metalizer paints are pre-thinned, airbrush-ready, and supplied in 30 ml (1 oz) bottles with shaker balls. Key Features Ultra-Fine Metallic Flakes: Precision-sized particles produce realistic metal finishes suitable for scale modeling. High Pigment Density: Updated formula with increased pigment levels for enhanced coverage and color accuracy. Pre-Thinned and Airbrush-Ready: No additional thinning required. Shake, load, and spray directly from the bottle. Must Be Applied Over Black Base: Requires black primer or base coat for best results. Splash Paints 1K Black Primer, 2K Black Primer, or a gloss black base coat is recommended. Clear Coat Required: Without a gloss clear coat, metalizer colors may appear differently than intended. Recommended PSI: 25–30 PSI. Apply thin layers only and avoid wet coats. Recommended Nozzle Size: 0.3 mm airbrush nozzle for color application. Durable Finish: Metalizer finishes are handleable once cured. Application Notes Apply thin layers over black primer or base coat. Flash off until matte between coats. Avoid spraying wet coats. Light passes produce the best metallic effect. A gloss clear coat (such as Splash Paints 2K Ultra Clear) should be applied to protect the finish and achieve intended appearance. A respirator must be worn during use. Product is flammable and must be kept away from all heat sources. Specifications Brand Splash Paints Series Metalizer Series Paint Type Acrylic lacquer with metallic flakes Application Airbrush only Volume 30 ml (1 oz) per bottle Colors Available 11 Thinning Required No (pre-thinned) Recommended PSI 25–30 PSI Recommended Nozzle 0.3 mm Base Coat Required Yes (black primer or gloss black) Clear Coat Required Yes Country of Origin USA

Splash Paints Mecha Series Lacquer Airbrush Paint The Splash Paints Mecha Series is a line of high-concentrate pigment lacquer paints designed for airbrush application on scale models, Gunpla, and 3D prints. The Mecha Series includes 27 colors across two sub-ranges: the core MS Colors (MSO-001 through MSO-012) featuring mecha-inspired tones such as Mecha Red, Zeon Grey, and Titan Blue, and the EVA Colors (MSO-013 through MSO-027) featuring Evangelion-inspired shades including Eva Neon Green, Eva Midnight Purple, and Eva Proto Yellow. All Mecha Series paints are pre-thinned, airbrush-ready, and supplied in 30 ml (1 oz) bottles with shaker balls. Key Features High-Concentrate Pigments: Formulated for strong opacity with 1 coat for shading and 2 coats for full coverage. Pre-Thinned and Airbrush-Ready: No additional thinning required. Shake, load, and spray directly from the bottle. Lacquer-Based Formula: Safe to apply over most lacquer-compatible primer types. Fast Drying: Flash off until matte between coats for efficient multi-coat application. Recommended PSI: 20–25 PSI for optimal atomization and coverage. Recommended Nozzle Size: 0.3 mm airbrush nozzle for color application. Wide Color Range: 27 colors across MS Colors and EVA Colors sub-lines, covering core mecha tones and Evangelion-inspired palettes. Application Notes MS Colors (MSO-001 – MSO-012): Apply over grey or white primer for most colors. EVA Colors (MSO-013 – MSO-027): White or light grey primer is recommended for most colors; dark grey or black primer for select darker shades (MSO-015, MSO-022, MSO-025, MSO-026). A respirator must be worn during use. Product is flammable and must be kept away from all heat sources. Specifications Brand Splash Paints Series Mecha Series (MS Colors + EVA Colors) Paint Type Acrylic lacquer Application Airbrush only Volume 30 ml (1 oz) per bottle Colors Available 27 (12 MS Colors, 15 EVA Colors) Thinning Required No (pre-thinned) Recommended PSI 20–25 PSI Recommended Nozzle 0.3 mm Country of Origin USA

Splash Paints Mecha Series Lacquer Airbrush Paint The Splash Paints Mecha Series is a line of high-concentrate pigment lacquer paints designed for airbrush application on scale models, Gunpla, and 3D prints. The Mecha Series includes 27 colors across two sub-ranges: the core MS Colors (MSO-001 through MSO-012) featuring mecha-inspired tones such as Mecha Red, Zeon Grey, and Titan Blue, and the EVA Colors (MSO-013 through MSO-027) featuring Evangelion-inspired shades including Eva Neon Green, Eva Midnight Purple, and Eva Proto Yellow. All Mecha Series paints are pre-thinned, airbrush-ready, and supplied in 30 ml (1 oz) bottles with shaker balls. Key Features High-Concentrate Pigments: Formulated for strong opacity with 1 coat for shading and 2 coats for full coverage. Pre-Thinned and Airbrush-Ready: No additional thinning required. Shake, load, and spray directly from the bottle. Lacquer-Based Formula: Safe to apply over most lacquer-compatible primer types. Fast Drying: Flash off until matte between coats for efficient multi-coat application. Recommended PSI: 20–25 PSI for optimal atomization and coverage. Recommended Nozzle Size: 0.3 mm airbrush nozzle for color application. Wide Color Range: 27 colors across MS Colors and EVA Colors sub-lines, covering core mecha tones and Evangelion-inspired palettes. Application Notes MS Colors (MSO-001 – MSO-012): Apply over grey or white primer for most colors. EVA Colors (MSO-013 – MSO-027): White or light grey primer is recommended for most colors; dark grey or black primer for select darker shades (MSO-015, MSO-022, MSO-025, MSO-026). A respirator must be worn during use. Product is flammable and must be kept away from all heat sources. Specifications Brand Splash Paints Series Mecha Series (MS Colors + EVA Colors) Paint Type Acrylic lacquer Application Airbrush only Volume 30 ml (1 oz) per bottle Colors Available 27 (12 MS Colors, 15 EVA Colors) Thinning Required No (pre-thinned) Recommended PSI 20–25 PSI Recommended Nozzle 0.3 mm Country of Origin USA

Splash Paints Mecha Series Lacquer Airbrush Paint The Splash Paints Mecha Series is a line of high-concentrate pigment lacquer paints designed for airbrush application on scale models, Gunpla, and 3D prints. The Mecha Series includes 27 colors across two sub-ranges: the core MS Colors (MSO-001 through MSO-012) featuring mecha-inspired tones such as Mecha Red, Zeon Grey, and Titan Blue, and the EVA Colors (MSO-013 through MSO-027) featuring Evangelion-inspired shades including Eva Neon Green, Eva Midnight Purple, and Eva Proto Yellow. All Mecha Series paints are pre-thinned, airbrush-ready, and supplied in 30 ml (1 oz) bottles with shaker balls. Key Features High-Concentrate Pigments: Formulated for strong opacity with 1 coat for shading and 2 coats for full coverage. Pre-Thinned and Airbrush-Ready: No additional thinning required. Shake, load, and spray directly from the bottle. Lacquer-Based Formula: Safe to apply over most lacquer-compatible primer types. Fast Drying: Flash off until matte between coats for efficient multi-coat application. Recommended PSI: 20–25 PSI for optimal atomization and coverage. Recommended Nozzle Size: 0.3 mm airbrush nozzle for color application. Wide Color Range: 27 colors across MS Colors and EVA Colors sub-lines, covering core mecha tones and Evangelion-inspired palettes. Application Notes MS Colors (MSO-001 – MSO-012): Apply over grey or white primer for most colors. EVA Colors (MSO-013 – MSO-027): White or light grey primer is recommended for most colors; dark grey or black primer for select darker shades (MSO-015, MSO-022, MSO-025, MSO-026). A respirator must be worn during use. Product is flammable and must be kept away from all heat sources. Specifications Brand Splash Paints Series Mecha Series (MS Colors + EVA Colors) Paint Type Acrylic lacquer Application Airbrush only Volume 30 ml (1 oz) per bottle Colors Available 27 (12 MS Colors, 15 EVA Colors) Thinning Required No (pre-thinned) Recommended PSI 20–25 PSI Recommended Nozzle 0.3 mm Country of Origin USA

Splash Paints Mecha Series Lacquer Airbrush Paint The Splash Paints Mecha Series is a line of high-concentrate pigment lacquer paints designed for airbrush application on scale models, Gunpla, and 3D prints. The Mecha Series includes 27 colors across two sub-ranges: the core MS Colors (MSO-001 through MSO-012) featuring mecha-inspired tones such as Mecha Red, Zeon Grey, and Titan Blue, and the EVA Colors (MSO-013 through MSO-027) featuring Evangelion-inspired shades including Eva Neon Green, Eva Midnight Purple, and Eva Proto Yellow. All Mecha Series paints are pre-thinned, airbrush-ready, and supplied in 30 ml (1 oz) bottles with shaker balls. Key Features High-Concentrate Pigments: Formulated for strong opacity with 1 coat for shading and 2 coats for full coverage. Pre-Thinned and Airbrush-Ready: No additional thinning required. Shake, load, and spray directly from the bottle. Lacquer-Based Formula: Safe to apply over most lacquer-compatible primer types. Fast Drying: Flash off until matte between coats for efficient multi-coat application. Recommended PSI: 20–25 PSI for optimal atomization and coverage. Recommended Nozzle Size: 0.3 mm airbrush nozzle for color application. Wide Color Range: 27 colors across MS Colors and EVA Colors sub-lines, covering core mecha tones and Evangelion-inspired palettes. Application Notes MS Colors (MSO-001 – MSO-012): Apply over grey or white primer for most colors. EVA Colors (MSO-013 – MSO-027): White or light grey primer is recommended for most colors; dark grey or black primer for select darker shades (MSO-015, MSO-022, MSO-025, MSO-026). A respirator must be worn during use. Product is flammable and must be kept away from all heat sources. Specifications Brand Splash Paints Series Mecha Series (MS Colors + EVA Colors) Paint Type Acrylic lacquer Application Airbrush only Volume 30 ml (1 oz) per bottle Colors Available 27 (12 MS Colors, 15 EVA Colors) Thinning Required No (pre-thinned) Recommended PSI 20–25 PSI Recommended Nozzle 0.3 mm Country of Origin USA