Pre-Order

Official SNAA RetailerLA Scale Model is an authorized retailer of SNAA. All SNAA model kits are 100% genuine and sourced directly from the manufacturer. Overview The SNAA 1/144 BE Thunderstorm Mordred is a model kit from the Beyond Exquisite (BE) Round Table Knights series, the 11th entry in the lineup. Based on the Arthurian traitor knight Mordred, this design features a lean, agile silhouette with large wing-like back elements, a lance, and an ornate shield - setting it apart from the heavier, bulkier knights in the series. SNAA is a sub-brand of Supernova, a Chinese manufacturer that has built a reputation for delivering full inner frame 1/144 kits with loaded weapon sets at price points that consistently undercut comparable Bandai RG kits. The Round Table Knights line reimagines figures from Arthurian legend as original mecha designs, each with a distinct combat role and visual identity. Key Features 1/144 scale original mecha design - 11th entry in the Round Table Knights BE series Agile combat silhouette - Lean frame with prominent wing-like back elements, distinct from the line's heavier knights Lance and shield loadout - Visible in gray model images; full weapon list pending official confirmation Full inner frame construction - Standard for the Round Table Knights line, enabling strong articulation and posing Snap-fit assembly - No cement required; includes water slide decals (standard for the BE line) Builder Context The Round Table Knights kits are suited for beginner to intermediate builders. Assembly is snap-fit with no cement required, and the build complexity is comparable to Bandai RG kits. Panel lining and decal application are recommended for the best finished appearance, but painting is optional. Why Build This Kit The SNAA Thunderstorm Mordred fills an interesting role in the Round Table Knights lineup as one of the more agile, speed-oriented designs alongside heavier entries like Gawain and Bedivere. At 72 yuan MSRP (roughly the same price point as other standard BE kits), it continues SNAA's strategy of delivering full inner frame 1/144 kits with loaded weapon sets at RG-competitive pricing. The Round Table Knights line has steadily improved with each release - earlier kits like Incise Grace had fit inconsistencies, while more recent entries like Lamorak and Percival have tightened tolerances and improved hand joint strength. Builders who want a mecha shelf that goes beyond Gundam will find this kit fits comfortably alongside other Round Table Knights entries, and the Mordred design's lance-and-shield loadout gives it a distinct display silhouette compared to the sword-heavy kits that dominate the series. This is the 11th kit in a twelve-knight lineup, so collectors following the full series will want to secure it early. Box Contents Plastic runner plates (count TBD - pending official release) Inner frame runner(s) Lance weapon Shield Additional weapon accessories (pending official confirmation) Water slide decal sheet Foil sticker sheet Assembly instruction manual Specifications Brand SNAA Series Beyond Exquisite (BE) - The Round Table Knights Character Thunderstorm Mordred (幻风雷-莫德雷德) Series Entry 11th in the Round Table Knights lineup Scale 1/144 Height TBD (typical Round Table Knights kits stand approximately 17 cm / 6.7 in) Materials ABS / PS / POM (pending official confirmation) Assembly Snap-fit, no cement required Manufacturer MSRP 72 yuan Preorder Notice:This item is currently on preorder and will be shipped once available. Please be aware that cancelling a preorder will incur a 25% restocking fee. For detailed information on our preorder and cancellation policies, please visit our FAQs page.

Overview The Motor Nuclear MNP-XH19A Yue Fei is a Zhongyong Class model kit from the Legend of Star General series - the 24th release in Motor Nuclear's flagship XH lineup. The kit features Motor Nuclear's MNP line construction: snap-fit plastic armor assembly over a pre-assembled alloy inner frame. Yue Fei, the Southern Song dynasty general historically associated with loyalty and military valor, is interpreted here as a winged combat mecha built around a Peng (roc bird) motif, with a dramatic multi-panel wing backpack that dominates the kit's silhouette. Motor Nuclear is a Chinese manufacturer whose model kits are tied to an original serialized manhua called Legend of Star General. The XH series translates Chinese historical and mythological figures into detailed mechanical combat units with alloy inner frames and pre-painted components. Key Features Pre-Assembled Alloy Inner Frame - Metal inner frame provides structural rigidity and weighted feel, consistent with all MNP line kits Multi-Panel Wing Backpack - Articulated wing unit with translucent red feather panels, white structural frames, gold circular joints, and bird-head forms at the wing tips; wingspan is dramatically large relative to the body Translucent Effect Parts - Blue translucent flame-shaped effect parts on the head crest, and amber translucent cheek panels with etched character patterns visible in the face plate close-up Multiple Handheld Weapons - At minimum a long polearm and a straight sword are visible across the official images Pre-Painted Components - Metallic red, gold, white, blue, and purple finish visible across the official images, consistent with MNP line color separation Snap-Fit Construction - Exterior armor components assemble over the pre-built alloy inner frame using tool-free snap-fit connections Builder Context The MNP-XH19A Yue Fei is suited for intermediate to advanced builders comfortable with multi-session builds and layered armor assembly. Motor Nuclear's MNP kits share construction complexity comparable to MG-grade Bandai kits, but the pre-assembled alloy inner frame reduces frame build time. Motor Nuclear parts are known for sharp, precise edges - side cutters and careful handling are recommended. Why Build This Kit The Motor Nuclear MNP-XH19A Yue Fei is the first Legend of Star General kit built around a winged flight-type design, making it visually distinct from every previous release in the series. The translucent red wing panels and articulated multi-panel backpack give the finished build a wingspan and shelf presence that no other kit in the MNP lineup currently matches. Motor Nuclear's Zhongyong Class kits typically offer competitive value against Bandai MG kits at similar price points, with alloy inner frames and pre-painted finishes that MG kits do not include. Builders should note that this product is still in Motor Nuclear's optimization stage as of September 2026, and final specifications including height, runner count, and full accessory list have not been published. Box Contents Pre-assembled alloy inner frame Snap-fit plastic armor components Handheld weapons (polearm and sword confirmed from official images; full weapon list not yet published) Blue translucent effect parts Wing backpack assembly with translucent red panels Instructions Specifications Manufacturer Motor Nuclear Series Legend of Star General Line MNP Class Zhongyong (Loyal-Brave) Character Tiankui Star God of War - Yue Fei Height Not yet published Materials Not yet published (MNP line standard: ABS, POM, alloy) Construction Snap-fit plastic assembly with pre-assembled alloy inner frame Painting Required No - pre-painted components and color-separated parts Product Number MNP-XH19A Release Number #24 in XH series Status Optimization stage (not final production) Preorder Notice:This item is currently on preorder and will be shipped once available. Please be aware that cancelling a preorder will incur a 25% restocking fee. For detailed information on our preorder and cancellation policies, please visit our FAQs page.

Official Infinite Dimension Retailer LA Scale Model is an authorized retailer of Infinite Dimension. All Infinite Dimension model kits are 100% genuine and sourced directly from the manufacturer. Overview The Infinite Dimension 1/100 RT-002 Nemesis Mechanic Clear Special Edition is a structural reimagining of the brand's 10th anniversary flagship kit, produced under the In ERA+ product line as part of the Advanced Strategic Revenge Titan (A.S.R.T.) series. Rather than a simple color swap, this edition replaces the standard dark exterior armor with crystal-clear transparent ABS panels designed to fully expose the triple-layer inner frame construction beneath - and upgrades the inner frame itself with deeper color contrast, expanded pre-painted coverage, and nearly double the photo-etch detail of the original. Infinite Dimension is a premium Chinese mecha design studio known for intricate mechanical sculpting and complex layered internal frames, operating alongside its collaboration sub-brand Infinite Nova under the IN ERA+ consumer label. Key Features Crystal-Clear Transparent ABS Armor - Exterior armor panels use the highest-transparency ABS raw material available, coated on both sides with a proprietary clarity-enhancing paint that achieves near-crystal transparency while forming a hardened protective film that resists normal scratches and handling wear Upgraded Inner Frame Color Separation - The second-layer inner frame is recolored from the standard edition's green-gray to a deeper mechanical raw gray, creating stronger visual contrast against the silver meridian frame details when viewed through the transparent armor Expanded Blue-Silver Pre-Painted Coverage - Additional blue-silver paint applications across the head, chest sides, arms, hip, lower legs, and cockpit area ensure the inner frame looks detailed and layered when fully visible through the clear panels Redesigned Wing Blade Inner Frame - The Vengeance Blade wing units receive a newly designed internal backplate with blue-silver pre-paint, produced on a dedicated new mold created specifically for this edition to prevent the blades from appearing hollow under transparent armor 62 Photo-Etch Parts (Up from 34) - Nearly double the metal etching detail of the standard edition, with additional pieces on the antenna, inner thigh, knees, calves, and other visible areas to maximize layered detail under transparent panels 22 Pre-Painted Runners (Up from 14) - Expanded pre-painted runner count covers the additional blue-silver frame applications, transparency coating, and new wing blade backplate parts Full Standard Nemesis Feature Set - Retains the complete weapon system (eight transformable Vengeance Blades, great swords, spike rifles, shield claws), linked armor deployment hatches, backpack-mounted cockpit, optional pre-assembled POM joints, display base with weapon storage, and commemorative artbook Builder Context The Mechanic Clear Special Edition is an advanced-level build comparable to the standard RT-002 Nemesis in assembly complexity and time investment. The transparent armor panels require more careful handling during assembly to avoid visible fingerprints and scratches, and builders should note that minor paint coating unevenness may be visible on individual parts at certain angles due to the extremely high transparency - this is a known characteristic of the coating process and is not noticeable once the kit is fully assembled. The snap-fit construction does not require cement, and the included POM joint units remain available for builders who prefer tighter joint hold over smoother articulation. Why Build This Kit The Infinite Dimension RT-002 Nemesis Mechanic Clear Special Edition is not a standard clear-color reissue - it is a ground-up rework of the inner frame presentation with 22 pre-painted runners, 62 photo-etch parts, a new dedicated mold for the wing blade backplate, and a proprietary transparency-enhancing coating process that goes significantly beyond what typical mechanic clear kits offer from any manufacturer. For builders who already own the standard Nemesis, the Mechanic Clear edition functions as a display counterpart that reveals the triple-layer inner frame architecture the standard edition conceals - the deeper mechanical gray second layer and expanded blue-silver coverage were specifically designed to look complete and detailed when viewed through transparent armor. At 22 cm to the head and roughly 45 cm wide with wing blades deployed, the clear armor creates a visual effect comparable to exhibition-style display models rather than a typical clear kit. Builders should be aware that the transparent panels amplify any handling marks, so cotton gloves or careful part placement during assembly are recommended. Box Contents Nemesis Mechanic Clear model runners (including 22 pre-painted runners with transparency-coated clear ABS armor, blue-silver frame parts, and metallic meridian frame runners) Redesigned wing blade backplate runners (new mold, blue-silver pre-paint) Pre-assembled POM joint units (optional use) 8 x Vengeance Blade weapon assemblies (transformable sword/gun mode) Red blade components (curved sword formation) Spike gun components Wing blade components (x4) Great sword assemblies (x2, convertible to rifle mode) Shield claw assemblies (x2, claw/pincer mode switchable) 62-piece metal etching parts sheet Etched metal nameplate 3D sticker sheet Water transfer decal sheet Display base with weapon storage slots and maintenance arms Metal support rod / kickstand Cardboard runner organizer trays (x2) Full-color instruction manual with QR code video guides Commemorative design artbook Brand Infinite Dimension / In ERA+ Series Advanced Strategic Revenge Titan (A.S.R.T.) Model RT-002 Nemesis Mechanic Clear Special Edition Scale 1/100 Height (to head) Approx. 22 cm Height (with backpack) Approx. 27 cm Display Width (wings deployed) Approx. 45 cm Weight (full armor) Approx. 440 g Material ABS (clear-coated transparent + standard), PS, POM Pre-Painted Runners 22 Photo-Etch Parts 62 pieces Preorder Notice:This item is currently on preorder and will be shipped once available. Please be aware that cancelling a preorder will incur a 25% restocking fee. For detailed information on our preorder and cancellation policies, please visit our FAQs page.

Overview The MUFS-S5 Fortress is a 1/60 scale mini mecha model kit from Sheik Mainland's 3MIN Project series - a line of compact, snap-fit original mecha designed for fast assembly and army building. Each box contains three identical Fortress units built from six runners (two per unit), allowing builders to field a full squad straight out of the box. The Fortress is the third mecha design in the 3MIN Project lineup and features an Armored Core-inspired artillery platform silhouette rather than a humanoid close-combat frame, with opening missile compartments on the shoulders and legs, a functional cockpit hatch, and dual handheld weapons per unit. Key Features Set of 3 Kits Per Box - Each box includes three identical Fortress units built from six runners (two per unit) for squad displays and army-building configurations Opening Missile Compartments - Hatches on both the shoulders and lower legs open to reveal 8-tube rocket pod interiors Dual Weapons Per Unit - Each Fortress includes one heavy cannon and one Gatling gun, totaling six weapons across the box for free mixing across units Opening Cockpit - The torso features a hinged cockpit hatch with interior detail, compatible with separately sold Sheik Mainland 3MIN Project pilot figures Full Ball Joint Articulation - All connection points use ball joints, providing head rotation, arm windmill, 90-degree-plus elbow and knee bends, waist tilt, and articulated rear thruster nozzles 3mm Modular Hardpoints - Multiple standardized connection points across the body for cross-compatible weapon and accessory mounting with other 3MIN Project releases Multiple Color and Material Options - Available in Metallic Black (POK material), Olive Drab (ABS), and City Gray (ABS) Builder Context The Fortress is a beginner-friendly snap-fit kit that requires no cement, paint, or specialized tools. Assembly is straightforward enough that most builders will not need the instructions by the second unit. Despite the simple structure, the mold precision is high and the parts are notably thick and dense compared to standard Bandai KPS plastic. Builders should be aware that some flash, mold lines, and minor plastic overflow are present and may need trimming with a hobby knife. One common assembly issue: the elbow ball joint sockets are left/right specific, but the manual does not clearly indicate this - installing them backwards will lock the shoulder's lateral movement, and the tight fit makes disassembly difficult. The mono-eye sensor and missile warheads benefit from color touch-up with a marker or brush for a finished look. Why Build This Kit The Sheik Mainland MUFS-S5 Fortress is one of the most cost-effective army-building options currently available in the North American mecha kit market, with three fully articulated 1/60 scale units included in a single box at a price comparable to one Bandai HG kit. The Fortress occupies a similar concept space to Bandai's 30 Minutes Missions line - quick-build, modular, customizable units - but delivers three kits per box instead of one and uses an Armored Core-inspired artillery walker design that stands out from the humanoid frames that dominate most mecha kit lines. At approximately 15 cm tall with opening missile compartments on the shoulders and legs, a hinged cockpit, and dual handheld weapons per unit, the Fortress packs a surprising amount of play value and display detail into a kit that builds in minutes. The 3MIN Project's standardized 3mm hardpoints make the Fortress compatible with vehicles, soldiers, and additional mech frames in the series, so it functions as an entry point into a modular ecosystem rather than a standalone purchase. Builders who also paint will find the Fortress especially appealing as a low-cost practice subject - the dense ABS plastic takes primer and paint well, and at three kits per box, there is room to experiment with different color schemes without high financial risk. Box Contents 6 runners (2 per unit, builds 3 identical Fortress kits) 6 weapons (1 heavy cannon + 1 Gatling gun per unit) Assembly instruction sheet (two-fold) Specifications Manufacturer Sheik Mainland Series 3MIN Project Model Number MUFS-S5 Product Name Fortress (要塞) Scale 1/60 Height Approximately 15 cm Materials ABS (Olive Drab, City Gray) / POK (Metallic Black) Runner Count 6 (2 per unit) Kit Count 3 per box Weapons 1 heavy cannon + 1 Gatling gun per unit (6 total) Assembly Type Snap-fit, no cement required Joint Type Ball joints throughout Compatibility 3mm connection standard (cross-compatible with 3MIN Project series) Box Dimensions Approximately 22 x 16.5 x 8.5 cm Box Weight Approximately 298g Country of Origin China Recommended Age 15+ Preorder Notice:This item is currently on preorder and will be shipped once available. Please be aware that cancelling a preorder will incur a 25% restocking fee. For detailed information on our preorder and cancellation policies, please visit our FAQs page.

DLKHobby 1/100 ZAW-S02 Kingfisher Atmospheric Type The DLKHobby 1/100 ZAW-S02 Kingfisher Atmospheric Type is the second 1/100 scale mecha model kit in the ZAW Project series, following the ZAW-S01 Ikaruga Universal Space Type. In-universe, the Kingfisher is an atmospheric-operations variant of the Ikaruga, modified for high-mobility flight within planetary atmospheres. The kit retains the multi-layer inner frame design that defined the Ikaruga while introducing a separable backpack that transforms into an independent support craft. Key Features Multi-Layer Inner Frame System: Full inner frame construction with a multi-layer design and multi-segment articulated joints, continuing the engineering approach established in the ZAW-S01 Ikaruga Transformable Backpack: The backpack unit detaches from the main body and converts into a standalone support craft, adding a flight-mode display option not available in the Ikaruga Atmospheric-Operations Design: Redesigned external armor reflects the Kingfisher's atmospheric flight specialization, with aerodynamic thruster wings and a streamlined silhouette distinct from the Ikaruga's space-combat profile Full Weapon Loadout: Includes an XVC-08[P] Improved Ragnarok support unit, high-energy beam rifle, long-range rifle, shield, aerial-type funnels, and piercing blade Collaboration Decals: Waterslide decal sheet produced in partnership with Dalin Model Decal and Lai Er Zwei Builder Context The Kingfisher uses the same multi-layer inner frame construction as the Ikaruga, so builders familiar with that kit will recognize the build sequence. The multi-segment joints and layered frame construction place this kit at an intermediate-to-advanced skill level, comparable in complexity to Bandai MG kits with inner frames. Snap-fit assembly is expected based on the Ikaruga's construction, though cement may be helpful for small thruster and weapon attachment points. Why Build This Kit The DLKHobby ZAW-S02 Kingfisher Atmospheric Type is the more accessible entry point into the ZAW Project series, offering the same multi-layer inner frame engineering as the Ikaruga at a lower price and a more compact 20 cm finished height. The transformable backpack gives this kit a display option the Ikaruga does not have - builders can show the main frame in a ground-combat pose while the support craft hovers separately on a stand. At approximately 20 cm tall, the Kingfisher is closer in size to a standard 1/100 MG kit than the oversized Ikaruga, making it easier to integrate into existing shelf displays. Builders who found the Ikaruga's 99-runner build intimidating should find the Kingfisher a more manageable introduction to DLKHobby's inner frame system, while still getting the layered-frame depth that sets this brand apart from most third-party 1/100 kits. Box Contents Runners for ZAW-S02 Kingfisher model kit XVC-08[P] Improved Ragnarok support unit High-energy beam rifle Long-range rifle Shield Aerial-type funnels Piercing blade Waterslide decal sheet (Dalin x Lai Er Zwei collaboration) Instruction manual Brand DLKHobby Manufacturer Dalin Product ZAW-S02 Kingfisher - Atmospheric Type Series ZAW Project Scale 1/100 Height Approx. 20 cm (7.9 in) Materials ABS, PVC (unconfirmed - verify before publishing) Construction Snap-fit assembly, multi-layer inner frame Release Date November 2026 Preorder Notice:This item is currently on preorder and will be shipped once available. Please be aware that cancelling a preorder will incur a 25% restocking fee. For detailed information on our preorder and cancellation policies, please visit our FAQs page.

Overview The Motor Nuclear MNP-XH08 Wei Yuan Shi - Imperial Guard Variant is a Steadfast Valor-grade model kit from the Legend of Star General series. This variant reconfigures the Wei Yuan platform with the equipment loadout and gold-and-white color scheme of the Tiandu Imperial Guard, adding a beast-face round shield, gold melon hammer, backpack banners, and redesigned armor panels to the base chassis. Motor Nuclear is a Chinese manufacturer known for original mecha designs that fuse ancient Chinese military aesthetics with sci-fi engineering, and the Wei Yuan line represents the entry-level tier within their Legend of Star General range. Key Features Alloy Inner Frame - Zinc alloy skeleton with 11 pre-assembled joint assemblies provides weight, stability, and the ability to hold dynamic poses under the full weapon loadout Imperial Guard Weapon Arsenal - Includes a Tiandu Army Standard Beast-Face Round Shield, Type Zero-Three Gold Melon Hammer, Tiandu Army Standard Long Sword, Type 33 Light Crossbow, and four Type 63 Horizontal Blade Prototype - Infantry Edge swords Pre-Painted Color Separation - 26 of 38 runners are pre-painted (193 painted parts), delivering the gold, white, and bronze Imperial Guard color scheme without painting Four Interchangeable Faceplates - Removable side head panels allow free swapping between four distinct face designs for display variety Modular Weapon Mounting System - Six documented mounting configurations including thigh-mounted weapon hardpoints, rear skirt armor weapon rails, backpack side connectors for horizontal blade holders or banners, and short/long shield arm connectors Display Stand Included - Dedicated base stand with support arm and nameplate sticker for finished display Builder Context This kit is suited for intermediate builders comfortable with multi-runner assembly and alloy inner frame integration. Construction is snap-fit with no cement required, and the pre-painted runners mean the kit looks display-ready without painting. The build complexity and part count (449 total parts across 38 runners) are comparable to a Bandai MG kit, with the added step of fitting armor over the pre-assembled alloy skeleton. Why Build This Kit The Motor Nuclear MNP-XH08 Wei Yuan Shi Imperial Guard Variant is the most display-oriented configuration in the Wei Yuan lineup, combining a striking gold-and-white pre-painted color scheme with a broad weapon arsenal that includes both melee and ranged options. The Tiandu Army Standard Beast-Face Round Shield is the visual centerpiece of this variant and is unique to the Imperial Guard configuration - no other Wei Yuan release includes it. At 19 cm to the head (21.5 cm with helmet tassel) and 358 grams fully equipped, the Imperial Guard has strong shelf presence for its price tier and noticeably more visual mass than Bandai HG or RG kits at similar price points. Builders already familiar with the Wei Yuan Trainee (MNP-XH06) or Sword Stance (MNP-XH07) will find the same chassis and build process here, with the differentiation coming entirely from the armor panels, color scheme, and equipment loadout. This kit shares the same weapon grip system as other Wei Yuan variants, so builders should note that the peg-and-socket hand connections work best when weapon weight is distributed across both hands and the display stand rather than relying on a single grip point. Box Contents Main body (38 runners, 449 total parts including 11 pre-assembled alloy inner frame components) Replacement hands (4 pairs) Backpack x1 Replacement backpack x1 Tiandu Army Standard Beast-Face Round Shield with handle x1 Type Zero-Three Gold Melon Hammer x1 Tiandu Army Standard Long Sword x1 Type 33 Light Crossbow x1 Type 63 Horizontal Blade Prototype - Infantry Edge x4 Horizontal blade mounting parts x1 pair Replacement faceplates x4 Replacement helmet crest x1 Replacement skirt armor x1 pair Shield arm connector (short) x1 Shield arm connector (long) x1 Rear skirt armor weapon connector x1 Backpack banners x2 Weapon connectors x3 Base stand with support arm x1 set Water slide decal sheet x1 Nameplate sticker sheet x1 Instruction manual Quality certificate After-sales service guide Brand Motor Nuclear Series Legend of Star General Grade Steadfast Valor (忠勇级) Model Number MNP-XH08 Height Approx. 19 cm (21.5 cm with helmet tassel) Width Approx. 10 cm Weight Approx. 358.4 g (body + all accessories), 181.6 g (body only) Materials ABS, POM, PVC, Zinc Alloy Total Parts 449 Runners 38 (26 pre-painted) Pre-Painted Parts 193 Pre-Assembled Components 11 alloy inner frame assemblies Decals Water slide decal sheet (military rank), nameplate sticker Display Stand Included Age Recommendation 16+ Preorder Notice:This item is currently on preorder and will be shipped once available. Please be aware that cancelling a preorder will incur a 25% restocking fee. For detailed information on our preorder and cancellation policies, please visit our FAQs page.

Overview The Cangdao CD-AS-02EX Tiger Hunter is a 1/100 scale model kit from the Guardian-Sentinels of White Tiger series, designated as a Stardust Class entry. The Tiger Hunter is the dedicated support mecha of the Sacred Beast White Tiger, designed as a stealth ambush unit specializing in long-range interference and rapid strikes from concealment. Its design draws from traditional Chinese warrior aesthetics with a distinctive conical hat head silhouette, dark navy and white armor panels accented in gold, and translucent blue effect parts representing energy discharge. Cangdao (also known as Zen Of Collectible / 藏道模型) is a Chinese mecha brand known primarily for its premium 1/72 diecast action figures in the Four Sacred Beasts universe. The Stardust Class line represents Cangdao's expansion into the assembly model kit format, building plastic armor panels over a pre-assembled alloy inner frame. The CD-AS-02EX is the second Stardust Class release following the CD-AS-01 Long Ji (Azure Dragon). Key Features Pre-Assembled Alloy Inner Frame - The alloy inner frame arrives pre-built, providing structural rigidity and stable joint tension beneath the plastic armor panels. This keeps the finished model poseable under the weight of armor and weapons without the looseness common in all-plastic builds. 1/100 Scale, MG-Grade Complexity - Standing approximately 21 cm tall with 20 body runner plates, the Tiger Hunter delivers a build experience comparable in scale and part count to a Bandai Master Grade kit. Extensive Weapon and Accessory Set - The kit includes a long ornate polearm, a chain weapon, a crossbow, a large shuriken, arrow projectiles, and multiple interchangeable hand parts, giving the Tiger Hunter a wide range of display and posing options. Translucent Blue Effect Parts - Clear parts represent the Tiger Hunter's energy discharge effects, including flowing energy cloaks and a translucent conical hat piece, adding visual impact to the finished display without painting. Display Base with Docking Station - A dedicated display base with an integrated equipment rack and docking structure is included, built from four runner plates. Water-Slide Decals - Two sheets of water-slide decals are included for additional markings and detail work. Builder Context The Cangdao Stardust Class kits are suited for intermediate builders comfortable with standard snap-fit model kit assembly. The pre-assembled alloy inner frame simplifies the structural build, but fitting plastic armor panels over a metal skeleton requires more care with tolerances than an all-plastic kit. The 20-runner part count and 1/100 scale put this in MG-grade territory in terms of build time and complexity. No cement is required, but panel lining and waterslide decal application are recommended to get the most out of the color separation and surface detail. Why Build This Kit The Cangdao CD-AS-02EX Tiger Hunter is one of the most affordable alloy-frame model kits currently available at 1/100 scale, offering a metal inner frame, a full weapon loadout, and a dedicated display base at a price point where most competitors provide all-plastic construction with minimal accessories. The accessory density is unusually high for this price range - a polearm, crossbow, chain weapon, shuriken, arrow projectiles, translucent energy effects, and multiple hand options give it more display versatility than many kits costing twice as much. At 21 cm, the Tiger Hunter stands at standard MG height and displays well alongside Bandai 1/100 kits, but the alloy frame gives it noticeably more weight and joint stability than a typical MG. The dark navy and gold color scheme differentiates it sharply from the CD-AS-01 Long Ji's dragon-themed aesthetic, making it a strong companion piece for builders collecting the Guardian-Sentinels series. For builders interested in Chinese-mythology mecha outside the Gundam universe, the Tiger Hunter is a lower-cost entry point into Cangdao's Four Sacred Beasts universe than the brand's premium 1/72 diecast figures, which typically retail above $100. Box Contents Body runner plates x20 Display base runner plates x4 Pre-assembled alloy inner frame x1 Water-slide decal sheets x2 Translucent blue effect parts (energy cloak, conical hat piece) Long ornate polearm Crossbow Chain weapon Large shuriken Arrow/dart projectiles Backpack/equipment modules Multiple interchangeable hand parts Assembly instructions Specifications Brand Cangdao (Zen Of Collectible / 藏道模型) Series Guardian-Sentinels of White Tiger (巡界使) Product Name Tiger Hunter (虎狩) Class Stardust Class (星塵級) Product Number CD-AS-02EX Scale 1/100 Height Approximately 21 cm Materials ABS, POM, Alloy (inner frame) Runner Count 20 body + 4 display base Assembly Required (snap-fit over pre-assembled alloy inner frame) Decals Water-slide x2 sheets EAN 6974422351979 Preorder Notice:This item is currently on preorder and will be shipped once available. Please be aware that cancelling a preorder will incur a 25% restocking fee. For detailed information on our preorder and cancellation policies, please visit our FAQs page.

Overview The Yu Yi Tang EMP-02 Haoling Baidi is a mecha model kit set from the Xuanji Zhuxinglu (玄机铸型录) Five Directions, Five Emperors series. Inspired by the White Emperor (Baidi) of Chinese cosmology, the kit includes the main humanoid mecha with a pre-assembled alloy inner frame and a pair of phoenixes - one male (Feng) and one female (Huang) - that combine with the mecha to form the Phoenix Divine Armor (凤凰神装). Yu Yi Tang (驭意堂) is a Chinese mecha brand under Gaosheng Culture that launched in 2024 with the Five Emperors series, gaining attention for combining mythology-themed original mecha design with alloy inner frame construction and multi-layer armor systems at aggressive price points. Key Features Pre-Assembled Alloy Inner Frame: A complete alloy skeleton (~300 g) comes fully assembled out of the box, paired with POM joint components for articulation. No frame assembly required - armor layers build directly onto the alloy core. Dual Phoenix Companion Mechas: Includes both a male Feng and female Huang phoenix, each with approximately 52 cm wingspan and 42 cm body length. The two are distinguished by subtle design differences - the Feng carries blue gemstone accents on the head and tail, while the Huang features gold crest plating and an openwork tail structure. Phoenix Divine Armor Combination: Both phoenixes mount onto a dedicated backpack via metal mechanical arms, forming the combined Haoling Baidi Phoenix Divine Armor configuration. Three display modes are available: Nirvana (wings fully spread), Linkage (wings deployed for balanced positioning), and Defense (wings wrapped protectively around the mecha body). 10 Pre-Painted Gold Runner Plates: Ten runners arrive factory-painted in two distinct gold tones - gilded gold (鎏金) and bright gold (耀金) - with improved paint coverage and no visible plastic marks under the finish, an upgrade over the first-release Yuanling Huangdi. Multi-Weapon Loadout with Combination Forms: Includes the Guanri long sword, Lingxiao short blade, and a grip structure that converts the side skirt wing armor into the Changgeng divine bow. The long sword and short blade connect end-to-end to form the Guanri Lingxiao spear (~38 cm). Phoenix tail feathers detach and mount onto included grip handles to create Jinxing whip blades. Linked Armor Mechanics: Shoulder armor, rear skirt, and knee sections feature built-in linkage mechanisms that deploy automatically during articulation, revealing internal frame detail and expanding the silhouette. Matte Surface Finish: All non-painted runners feature a factory matte texture, giving the assembled kit a built-in flat coat appearance without requiring a separate top coat application. Builder Context This is an intermediate-to-advanced build. The alloy inner frame eliminates skeleton assembly, but the 63 runners and multi-layer construction (alloy frame, inner structure, outer armor) produce a build time of approximately 7 hours. Assembly is snap-fit with no cement required. The instruction manual provides linear step-by-step guidance rather than stage-by-stage breakdown, and includes hidden gate mark placement on most visible surfaces. Builders familiar with MG-grade Bandai kits or other alloy-frame third-party kits like Motor Nuclear or Ming Jiang Legend will find the layered construction approach familiar, though the phoenix sub-assemblies add repetitive steps since both birds share nearly identical structures. Why Build This Kit The Yu Yi Tang EMP-02 Haoling Baidi is the second release in the Five Emperors series and represents measurable improvements over the first-release Yuanling Huangdi in paint quality, alloy frame refinement, and combined-form integration. The dual-phoenix configuration gives the completed display a wingspan exceeding 50 cm on each side, making the Phoenix Divine Armor form one of the largest shelf-presence kits available in this price range from any third-party manufacturer. For builders who want an alloy inner frame experience comparable to Motor Nuclear's MNP series or Ming Jiang Legend's Ying Zheng but with a mythology-themed aesthetic focused on Chinese cosmology rather than martial heroes, the Five Emperors line is the primary alternative. The matte surface finish, hidden gate marks, and pre-painted gold runners mean the kit presents well as a straight build without painting, though the predominantly white armor benefits noticeably from the included gold filigree waterslide decals. Builders should note that the combined Phoenix Divine Armor form weighs approximately 900 g and pushes the alloy frame joints to their support limits - the included display stand with dual snake-bone support arms is effectively required for long-term combined-form display rather than optional. Box Contents Haoling Baidi main mecha body (63 runners including 10 pre-painted gold plates) Pre-assembled alloy inner frame x1 Feng (male phoenix) body x1 Huang (female phoenix) body x1 Interchangeable hands x5 pairs (fists, open hands, three grip types) Guanri long sword x1 Lingxiao short blade x1 Changgeng divine bow grip assembly x1 Jinxing whip blade grip handles x2 Phoenix tail feather segments x4 Backpack with metal mechanical arm connectors x1 Display base with storage compartment x1 Snake-bone flexible support arms x2 Metallic gold waterslide decal sheet x1 Parts checklist x1 Assembly manual x1 Background display panel x1 Folding cardboard runner racks x2 Specifications Brand Yu Yi Tang (驭意堂) Series Xuanji Zhuxinglu - Five Directions, Five Emperors Mecha Designation EMP-02 Haoling Baidi Beast Designation MC-02F Feng / MC-02H Huang Height (Mecha) Approx. 25 cm Phoenix Wingspan Approx. 52 cm Phoenix Body Length Approx. 42 cm Combined Spear Length Approx. 38 cm Weight (Mecha Only) Approx. 529 g Weight (Phoenix Divine Armor) Approx. 900 g Box Weight Approx. 3.7 kg Runner Count 63 Pre-Painted Runners 10 (gold, two tones) Material ABS, POM, alloy (die-cast) Inner Frame Pre-assembled alloy Assembly Type Snap-fit plastic model kit Decals Metallic gold waterslide decals Age Recommendation 15+ EAN 6978065720017 Package Dimensions 53 x 23 x 40 cm Country of Origin China Preorder Notice:This item is currently on preorder and will be shipped once available. Please be aware that cancelling a preorder will incur a 25% restocking fee. For detailed information on our preorder and cancellation policies, please visit our FAQs page.

Overview The EDDAS 1/100 NGMPM01 Nomes Commander Type is a general-purpose mass production mecha from EDDAS Technology's original mecha universe. Designed as a squad-buildable grunt unit rather than a hero machine, Nomes features a military-realistic aesthetic with angular, blocky armor plating, a subdued blue-gray color scheme, and two interchangeable head options - a visor-type for standard units and a dual-eye type for commander configuration. EDDAS Technology (formerly Starfield Toys) has built a reputation for alloy-frame original mecha kits with extensive accessory loadouts, and Nomes is the fourth release in the line following Asgard, Salamander, and Valkyrie. Key Features Alloy inner frame - Zinc alloy skeleton with surface detailing provides structural rigidity, tight joints, and a hefty 220g finished weight Squad-building design - Two swappable head units (commander dual-eye and standard visor) let builders configure leader or rank-and-file units from the same kit Full weapon storage on body - Every included weapon can be mounted on the mecha simultaneously using back-mounted weapon racks, leg holsters, and rear waist attachment points Hangar-style display base - Upgraded ground base includes weapon rack pylons, mechanical arms, an elevator platform with three height settings, a ring-shaped maintenance gantry, and miniature crew figures Extensive weapon loadout - Includes beam sabers, machine cannons on articulated mechanical arms, folding knives stored in knee armor, pistol, large blade, semi-automatic rifle, submachine gun, and shield Linked armor movement - Knee bending triggers sequential armor panel shifts on the thigh and lower leg, revealing internal mechanical detail Four pairs of interchangeable hands - Fist, relaxed, open palm, and weapon grip types, all with independently articulated thumbs Builder Context Nomes is a snap-fit kit aimed at intermediate builders comfortable with alloy-frame assembly. The build experience is comparable to MG-grade Bandai kits in terms of part count and complexity, with 37 runners plus alloy frame components. Joint tightness is reported as firm across the alloy skeleton, and no cement or painting is required for a complete build, though the subdued color scheme benefits from panel lining and decal application. Why Build This Kit The EDDAS Nomes Commander Type is the only kit in the EDDAS lineup specifically designed for squad display - builders who want to recreate military formation scenes can purchase multiple units and differentiate them using the commander and standard head options. At approximately 19 cm, the finished build is sized consistently with standard 1/100 Bandai MG kits, but the 220g weight from the alloy inner frame gives it noticeably more heft and posing stability than a typical MG. The hangar-style display base with mechanical arms, elevator, crew figures, and weapon storage pylons is a standout accessory that reviewers have highlighted as a significant value-add, and it is compatible with other EDDAS kits in the line. For builders interested in real-type military mecha aesthetics outside of the Gundam universe, Nomes offers a weapon-dense, alloy-frame kit at a price point well below most competing 1/100 alloy-frame kits from brands like Motor Nuclear or Infinite Dimension. Box Contents 37 plastic runners (ABS/PS/POM) Zinc alloy inner frame components Commander head unit (dual-eye type) Standard head unit (visor type) 4 pairs of interchangeable hands (fist, relaxed, open palm, weapon grip) 2 beam sabers with blue effect parts 2 machine cannons with articulated mechanical arms 2 folding knives Pistol with barrel attachment Large blade Semi-automatic rifle Submachine gun with movable magazine Shield Back-mounted weapon rack assembly Leg-mounted weapon holster brackets (left and right) Hangar-style display base with weapon pylons, mechanical arms, elevator, ring gantry, and crew figures Standard display stand arm (alternative to hangar base) Water slide decal sheet 3D sticker sheet (gun muzzle and scope accents) Assembly instructions Specifications Manufacturer EDDAS Technology Product Name Nomes Commander Type Model Number NGMPM01 Scale 1/100 Height Approx. 19 cm (7.48 in) to head Weight Approx. 220g (assembled, without weapons) Materials POM, ABS, PS, Zinc Alloy Runner Count 37 runners + alloy frame parts Assembly Snap-fit, no cement required Decals Water slide decals + 3D stickers Release Date July 2026 Preorder Notice:This item is currently on preorder and will be shipped once available. Please be aware that cancelling a preorder will incur a 25% restocking fee. For detailed information on our preorder and cancellation policies, please visit our FAQs page.

Official SNAA RetailerLA Scale Model is an authorized retailer of SNAA. All SNAA model kits are 100% genuine and sourced directly from the manufacturer. SNAA 1/100 YR-05 Nether Emperor F.A Type (Feathered Eagle Equipment) The SNAA 1/100 YR-05 Nether Emperor F.A Type is the full armament upgrade of the Nether Emperor A.P Type, adding the Feathered Eagle wing and weapon system to the Emperor Series' most mobile frame. Where the A.P Type prioritized a clean, stripped-back silhouette, the F.A Type loads the same articulated skeleton with a complete flight-capable equipment set - front shield wings, rear vector thrust wings, and armed storage side wings - transforming the Nether Emperor from a ground-focused mobility unit into a multi-range combat platform. SNAA is a Chinese manufacturer known for original mecha designs across their Emperor Series (1/100) and Round Table Knights (1/144) lines. Key Features Feathered Eagle Wing System - Three-piece PF-series wing equipment consisting of a Front Anti-Beam Guard Wing (PF-01), Rear Vector Thrust Wing (PF-02), and two Armed Storage Side Wings (PF-03) that dramatically expand the kit's silhouette and display presence Full A.P Type Weapon Set Retained - Includes the Thunder Pulse ranged weapon, Instant Flash Broken Blade with extendable tip, and Armor-Piercing Thrust retractable bayonet carried over from the base configuration Full Inner Frame - Complete articulated skeleton shared with the A.P Type, featuring cockpit hatch, waist rotation, and hip joints with pull-down extension for expanded leg range of motion Multi-Range Combat Configuration - F.A Type adds long-range firepower and defensive wing equipment to the A.P Type's existing mid-range and close-quarters weapon set 1/100 Scale Snap-Fit Assembly - Pre-colored runners with ABS, POM, and PVC construction, no cement required SNAA x Starry Craftsman Co-Production - Joint development between SNAA and Starry Craftsman, the same partnership behind the Round Table Knights BE line Builder Context The Nether Emperor F.A Type is suited for intermediate to advanced builders. The base inner frame is shared with the A.P Type, which means tight joint assembly during the skeleton build - firm pressure is needed to seat frame parts, though outer armor goes on more smoothly. The added wing equipment increases the total build time and complexity beyond the A.P Type, and the finished kit will require careful balance when posing due to the rear-heavy wing system. Comparable in build involvement to a Bandai Master Grade kit with a large backpack or flight unit. Why Build This Kit The SNAA 1/100 YR-05 Nether Emperor F.A Type fills a specific gap in the Emperor Series lineup - it is the full armament configuration of the series' most posable frame, combining the A.P Type's mobility-first design with a dramatic wing system that no other Emperor kit offers. Where the Fire Lord F.P.A.A. delivers maximum visual impact through flame-effect parts and heavy armor, the Nether Emperor F.A Type achieves a different kind of shelf presence through its Feathered Eagle wingspan while retaining the flexible posing that made the A.P Type the recommended Emperor Series entry point. At its 168 RMB MSRP, the F.A Type sits at the same price tier as the Blade King (YR-02), making it a mid-range Emperor Series purchase rather than a premium commitment like the Fire Lord variants. Builders who already own the A.P Type should note that this is a standalone kit, not an add-on pack - the full mech plus all equipment is included. For builders new to SNAA's 1/100 line, the A.P Type remains the simpler and more affordable starting point, while the F.A Type is for those who want the upgraded loadout from the start. Box Contents YR-05 Nether Emperor F.A Type model kit runners Front Anti-Beam Guard Wing (PF-01) x1 Rear Vector Thrust Wing (PF-02) x1 Armed Storage Side Wings (PF-03) x2 Thunder Pulse ranged weapon x1 Instant Flash Broken Blade x1 Armor-Piercing Thrust retractable bayonet x1 Additional armaments (to be announced by SNAA) Water slide decals (expected, consistent with Emperor Series) Instruction manual Specifications Brand SNAA x Starry Craftsman Series Emperor Series Model Number YR-05 Product Name Nether Emperor F.A Type (Feathered Eagle Equipment) Scale 1/100 Height Approximately 22 cm / 8.66" (pending confirmation) Materials ABS, POM, PVC (pending confirmation) Assembly Snap-fit, no cement required Release August 2026 MSRP (China) 168 RMB Preorder Notice:This item is currently on preorder and will be shipped once available. Please be aware that cancelling a preorder will incur a 25% restocking fee. For detailed information on our preorder and cancellation policies, please visit our FAQs page.

Overview The Motor Nuclear MNP-XH05XP Zhao Yun with Moonlight Jade Lion SP Color is a limited edition recolor of Motor Nuclear's flagship Legend of Star General rider-and-mount set, featuring a white-and-silver armor scheme inspired by Zhao Yun's legendary "white-robed, silver-armored general" appearance from classical Chinese literature. The kit includes two complete builds in one box - the Zhaoyun mecha and the fully articulated Moonlight Jade Lion mechanical mount - both built on zinc alloy inner frames with pre-painted armor components. Motor Nuclear is a leading Chinese third-party mecha kit manufacturer known for high part counts, alloy-reinforced construction, and designs drawn from Chinese mythology and the Three Kingdoms era. Key Features Limited Edition SP Color White-and-Silver Finish - Pre-painted silver outer armor recreates Zhao Yun's classical "white robe, silver armor" appearance, with gold and translucent blue accents throughout both models Two Complete Builds in One Box - Includes the Zhaoyun mecha (approximately 23 cm standing, 26 cm with horns) and the Moonlight Jade Lion mount (approximately 32 cm standing), reaching up to 41 cm in a mounted rearing pose Zinc Alloy Inner Frame - 25 alloy components with over 70% alloy proportion in the humanoid inner frame, providing rigidity and long-term pose-holding stability without the joint sag common in all-plastic builds Bionic Four-Layer Horse Construction - The Moonlight Jade Lion uses a bone, muscle, organ, and skin layered structural design with its own alloy inner frame, featuring multi-layered articulated neck, lateral pull joints, and independent dragon claw skirt armor movement 126 Runners and 10 Pairs of Interchangeable Hands - One of Motor Nuclear's largest kits by part count, with extensive hand options for weapon posing and display variety Full Weapon Set with Lightning Effects - Includes the Longdan Bright Silver Spear, Qinggang Sword with sheath, three translucent lightning effect parts for the spear, and two articulated cloaks Three Saddle Configurations - Interchangeable saddle parts allow display in complete form, saddled form, or riding form for different mounted display options Builder Context The MNP-XH05XP is an advanced-level build suited for experienced builders comfortable with high part counts and alloy frame integration. Assembly is snap-fit with pre-painted parts - no cement or painting is required for a display-ready result. At 126 runners with both a humanoid and a fully articulated mount to assemble, the total build time significantly exceeds most Bandai MG kits and is comparable in scope to assembling two separate large-format third-party kits. Builders should note that Motor Nuclear parts are known for sharp edges due to precise mold tolerances - quality side cutters and light sanding are recommended. The rubber-coated metal wire horse reins require careful handling during assembly. Why Build This Kit The Motor Nuclear MNP-XH05XP Zhaoyun with Moonlight Jade Lion SP Color is one of the only model kits on the market that includes a fully articulated mechanical mount with its own alloy inner frame, making it a genuinely unique display piece with no direct equivalent from Bandai or other third-party manufacturers. The SP Color limited edition specifically appeals to builders who want the white-and-silver scheme that references Zhao Yun's most recognizable literary depiction, as opposed to the standard version's colorway. At over 1,600 grams total assembled weight and a mounted rearing height of 41 cm, the finished display presence exceeds most 1/60 and Perfect Grade builds in both footprint and visual impact. Builders already familiar with Motor Nuclear from smaller kits like the BV-XH01 Xiang Yu or the MNP-XH03 Blue Dragon should treat this as a significant step up in complexity and build time. The combination of pre-painted alloy frames, translucent lightning effect parts, and articulated cloaks means the kit looks display-ready out of the box, but the 126-runner part count and dual-build structure make it a multi-session project rather than a weekend build. Box Contents Zhaoyun main mecha body x1 Moonlight Jade Lion (Yulan White Dragon Steed) mechanical mount x1 Longdan Bright Silver Spear x1 Qinggang Sword x1 Sword sheath x1 Longdan Bright Silver Spear lightning effect parts x3 Articulated cloaks x2 Interchangeable hand parts x10 pairs Humanoid display base x1 Horse display base x1 Humanoid stand x1 Horse stand x1 Base connectors x2 Base combination connectors x2 Saddle-to-body connector x1 Sword sheath connector x1 Saddle styling replacement part x1 Horse back styling replacement part x1 Horse arm styling replacement part x1 Rubber-coated metal wire horse reins x1 Horse reins connectors x2 Nameplate x1 Star Soul General sticker sheet x1 Brand Motor Nuclear Series Legend of Star General Model Number MNP-XH05XP Version SP Color Limited Edition (White/Silver) Zhaoyun Height Approx. 23 cm (without horns), 26 cm (with horns) Moonlight Jade Lion Height Approx. 32 cm (without horns) Mounted Rearing Height Approx. 41 cm (without base) Zhaoyun Weight Approx. 450 g (without weapons) Moonlight Jade Lion Weight Approx. 1,200 g Total Runners 126 Alloy Components 25 pieces (over 70% alloy proportion in humanoid frame) Materials ABS, POM, zinc alloy, rubber-coated metal wire Recommended Age 16+ Preorder Notice:This item is currently on preorder and will be shipped once available. Please be aware that cancelling a preorder will incur a 25% restocking fee. For detailed information on our preorder and cancellation policies, please visit our FAQs page.

Overview The Sheik Mainland 3MIN Project-A Fenrir A6 Assault Type is a 1/18 scale mecha model kit and the heavy-assault tactical variant of the original Fenrir A2 Standard Type. Roughly half the runners are entirely new molds, covering a redesigned head, chest armor, shoulder armor, shin armor, tactical comms backpack, skirt armor, and a significantly expanded weapon and hand type loadout. Each box includes two complete Fenrir A6 kits, and the model supports three official configurations - CQC (Battle Armor), LA (Light Assault), and FA (Full Armor) - plus an undocumented transformation into a mechanical locust form using the existing joints and armor structure. Key Features Three Official Configurations - CQC Battle Armor for maximum protection, LA Light Assault for mobility-focused loadouts, and FA Full Armor for the heaviest weapon and armor coverage. Standard Type shoulder and knee armor parts are included for additional light-configuration options 8 Pairs of Hand Types - Five pairs feature wrist lateral articulation for natural weapon-holding angles. Includes fist (with movable thumb), pointing/finger-gun (with movable thumb), open palm (with four-finger inward bend), angled-grip pairs in both square and round hole variants for different weapon handles, and one bonus pair of POK wrist reinforcement joints for long-term durability Expanded Heavy Weapon Loadout - Rocket launcher with detachable warhead and rotatable grip/scope, assault rifle, micro submachine gun, tactical machete, dagger, grenade, and arm shield. All weapons are cross-compatible with the Standard Type Fenrir Tactical Comms Backpack - Rear-mounted radio module that detaches as a standalone display prop. The antenna is made from flexible soft rubber to resist white stress marks and breakage during handling Improved Joint Tuning - Upper waist tightened, lower waist loosened, and hip ball joints recalibrated compared to the Standard Type. Joint damping is more consistent across the entire body, and the knee joint no longer risks stress marks from over-tight assembly Rear-Mounted Skirt Armor - Both halves pivot from the rear on ball joints, allowing them to swing clear for forward kicks, side kicks, and deep crouching poses. Front skirt is a separate piece that flips upward independently Two Complete Kits Per Box - Standard packaging includes two full Fenrir A6 units with all accessories Builder Context The Fenrir A6 Assault Type assembles in approximately 10-15 minutes per unit using optimized single-gate runner design with no tools, adhesives, or painting required. Build time is longer than the Standard Type due to the additional armor and weapon parts but remains beginner-friendly. The instruction manual has known diagram errors at step 5 (hip joint orientation shown inverted) and mislabeled part numbers on the arm assembly - builders should match parts by shape rather than relying solely on the printed part numbers. The 3mm port system is fully compatible with Bandai 30MM, Kotobukiya MSG, and other Sheik Mainland 3MIN series accessories including the Xenostrike, Xentinel, and Worker Bee lines. Why Build This Kit The Sheik Mainland Fenrir A6 Assault Type is the recommended starting point for the 3MIN Project-A series if choosing between the A6 and the Standard Type, because it delivers significantly more accessories, improved joint tuning, and greater configuration variety at the same price tier. Chinese reviewer consensus from multiple July 2026 build videos confirms that the A6's wrist lateral articulation - present on five of the eight hand pairs - resolves the most common complaint about 1/18 scale kits: unnatural weapon-holding angles, particularly with longer rifles. At approximately 11 cm tall, the Fenrir A6 packs articulation density comparable to Bandai's RG line into a kit that costs under $15 per unit (two per box), making it one of the highest value-to-articulation ratios currently available from any manufacturer at any scale. The A6 does not replace the A2 Standard Type - the two designs are visually distinct enough to display well together, and the A6 includes the Standard Type's original shoulder and knee armor as alternate parts. Builders should note that the A6 does not include the small display stand that comes with the Standard Type, and the thicker shin armor slightly reduces maximum knee bend compared to the A2. Box Contents 2x Fenrir A6 Assault Type runner sets (approximately half new-mold runners) New-mold head, chest armor, shoulder armor, shin armor, and knee armor parts Standard Type shoulder armor and knee armor parts (for light configuration) Tactical comms backpack with detachable radio module and soft rubber antenna Rear-mounted skirt armor with ball-joint pivot assembly Rocket launcher (detachable warhead, rotatable grip and scope) Assault rifle Micro submachine gun Tactical machete Dagger Grenade Arm shield 8 pairs of hand types (5 with wrist lateral articulation, 1 POK reinforcement pair) Shoulder-mounted weapon hardpoint adapters Ball-joint to straight-peg connector adapters Angled connector adapters (for offset shield mounting) Assembly instructions Specifications Series 3MIN Project-A Scale 1/18 Height Approximately 11 cm (head height) Materials PS, POK (composite joints and bonus wrist joints), soft rubber (backpack antenna) Kit Count 2 per box Assembly Time Approximately 10-15 minutes per unit Construction Snap-fit, no tools or adhesives required Configurations CQC (Battle Armor), LA (Light Assault), FA (Full Armor) Hand Types 8 pairs (5 with wrist lateral articulation) Compatibility 3mm universal hardpoints (30MM, MSG, Sheik Mainland 3MIN series) Display Stand Not included Release July 2026 Manufacturer Sheik Mainland Preorder Notice:This item is currently on preorder and will be shipped once available. Please be aware that cancelling a preorder will incur a 25% restocking fee. For detailed information on our preorder and cancellation policies, please visit our FAQs page.

Official Motor Nuclear Retailer LA Scale Model is an authorized retailer of Motor Nuclear. All Motor Nuclear model kits are 100% genuine and sourced directly from the manufacturer. Overview The Motor Nuclear BV-XH04 TieFuTu is a plastic assembly model kit from Motor Nuclear's Xun Yong Class (BV) line, part of the Legend of Star General series. TieFuTu is a mass-production heavy armored unit from the Milun Kingdom faction, inspired by the historical Iron Pagoda heavy cavalry of the Jin Dynasty - fully encased siege infantry designed for frontal assault and armored advance. The Xun Yong Class is Motor Nuclear's compact, budget-friendly entry tier, and the BV-XH04 is the third character release in the line following Xiang Yu (BV-XH01) and Wen Zhong (BV-XH02). Key Features Xun Yong Class (BV) Line: Motor Nuclear's compact kit tier, delivering the brand's signature mecha aesthetics and articulation at a smaller size and lower price point than the standard MNP series. 193 Parts Across 11 Runners: Streamlined build with ABS construction and POM joint components for durable, stable articulation. No alloy parts or full inner frame - a lighter, faster build than the larger MNP kits. Eight Independently Articulated Skirt Armor Panels: Front, rear, and side skirt sections each articulate independently, with side panels featuring two-segment hinges that fold outward to clear leg movement for posing. Chinese Heavy Cavalry Design Language: Layered, tower-style modular armor plates from head to foot with a dark military green and iron gray color scheme, bronze-gold accents, and a weathered white shoulder treatment. The three-eyed head design is recessed into the chest armor, creating a hunched, armored silhouette distinct from any other kit in the line. Full Weapon Loadout with Storage Mounting: Beast-face round shield, long lance with transparent orange blade, and short straight sword. All weapons mount to the back and skirt armor for full-equipment carry display. Pull-Out Hip Extension Joints: Thighs feature pull-down joint extensions that increase lateral kick range and improve ground contact for stable standing poses. Four Pairs of Interchangeable Hands: Eight hand parts covering fist, weapon grip, and open palm configurations. Builder Context The BV-XH04 TieFuTu is a beginner-friendly kit with a 2-3 hour build time and snap-fit construction requiring no glue or paint for a complete appearance. Part fit across the kit runs tight - a common Motor Nuclear trait - so a basic hobby knife or light sanding on transparent parts and tight-fitting connections is recommended. Comparable in difficulty to a Bandai HG kit, with the added density of layered skirt armor engineering that gives the build more mechanical interest than a typical 1/144-class kit. Why Build This Kit The Motor Nuclear BV-XH04 TieFuTu is the first mass-production "grunt" unit in the Xun Yong Class lineup, and its appeal is fundamentally different from the named character kits (Xiang Yu, Wen Zhong) that preceded it - this is a kit designed to be bought in multiples and displayed as a heavy armored squad or army formation. The layered tower-armor silhouette, recessed three-eyed head, and dark military color scheme give each unit a distinctive, imposing shelf presence at 15 cm, and the eight-panel articulated skirt system provides more posing flexibility than most kits in this price range from any manufacturer. Builders who enjoy military-themed army building or diorama scenes will find the TieFuTu a natural complement to other Xun Yong Class kits like the BV-XH01 Xiang Yu, particularly since all weapons store on-body for a fully loaded look without the need for separate display stands. Motor Nuclear's armor surface detail is consistently cited by Chinese builders as rivaling Bandai Ver.Ka kits in precision, and the TieFuTu maintains that standard at a fraction of the price and build time. Builders should be aware that head articulation is limited due to the recessed chest design - the head rotates approximately 90 degrees left and right but has almost no vertical tilt - and some batches may show minor sink marks on dark green and deep-colored parts. Box Contents 11 runners (193 parts total, ABS + POM) Beast-face round shield Long lance with transparent orange blade Short straight sword Weapon mounting connectors Four pairs of interchangeable hands (8 total) Color-correcting sticker sheet Instruction manual Specifications Brand Motor Nuclear Series Legend of Star General Line Xun Yong Class (BV) Model Number BV-XH04 Character TieFuTu (Iron Pagoda) - Mass Production Heavy Armored Unit Faction Milun Kingdom Heavy Armor Corps Height Approx. 15 cm (5.9 in) Parts Count 193 Runner Count 11 Material ABS, POM Inner Frame None (no alloy components) Product Type Plastic assembly model kit (snap-fit) IP Original third-party mecha design Country of Origin China Preorder Notice:This item is currently on preorder and will be shipped once available. Please be aware that cancelling a preorder will incur a 25% restocking fee. For detailed information on our preorder and cancellation policies, please visit our FAQs page.

Overview The Hemoxian 1/12 Red Hood is a licensed model kit based on the character from GODDESS OF VICTORY: NIKKE, the mobile shooter developed by SHIFT UP. Red Hood is one of the game's most popular characters, known for her sniper specialization, distinctive red coat, and central role in the story campaign. This kit includes two complete body builds in a single box - standing and crouching - allowing both of Red Hood's signature in-game poses to be displayed simultaneously without swapping parts between them. Hemoxian is a Chinese model kit manufacturer known for the Over Zero original mecha series and the Reverberation of Medta line. The Red Hood kit marks Hemoxian's first licensed character product from a video game IP, applying their snap-fit engineering and pre-painted runner approach to a bishoujo-style character kit at 1/12 scale. Key Features Dual Body Builds - One box contains complete standing and crouching body assemblies as independent builds, with no shared parts between them Pre-Painted Runners - 15 of the 26 total runners are pre-painted, combined with tampo-printed face parts for near-official-art color accuracy out of the box 10 Interchangeable Face Parts - Seven pre-printed expressions covering combat, casual, and victory poses, plus three blank faces for custom painting Dual-Material Coat System - Red Hood's signature coat is included in both soft PVC and hard plastic versions, interchangeable between standing and crouching bodies along with matching arm parts Wolfsbane Sniper Rifles - Two complete rifles with interchangeable muzzle tips, soft rubber gun straps, and removable magazines Fabric Scarves with Internal Wire - Two cloth scarves with embedded wire allow free-form shaping to match in-game poses First-Batch Bonus: Recordable Cassette Tape - A functional cassette tape and storage case are included as a first-production exclusive, referencing Red Hood's in-game cassette player accessory Builder Context This is a snap-fit kit with pre-painted runners that does not require cement or painting for a display-ready result, making it accessible to builders familiar with Bandai HG or 30MS kits. The 26-runner part count and dual-body construction put the total build time and complexity above a typical single-body 1/12 kit. Nippers and basic cleanup tools are recommended. The fabric scarves and soft PVC coat parts introduce mixed-material handling that builders accustomed to all-plastic kits should approach with care during assembly. Why Build This Kit The Hemoxian 1/12 Red Hood is currently the only licensed plastic model kit of Red Hood from GODDESS OF VICTORY: NIKKE available from any manufacturer. The dual-body design is the kit's primary differentiator - most character model kits at any scale require choosing between poses or swapping parts, while this kit builds both the standing and crouching forms as separate complete assemblies from a single box. At 17.5 cm standing height, the finished build has shelf presence comparable to other Hemoxian 1/12 releases like the Jiulian and Rhande Koskinen kits. The 15 pre-painted runners and tampo-printed faces mean the finished model closely matches the character's in-game appearance without painting, which positions it as an alternative to pre-painted PVC figures for NIKKE fans who want a hands-on build experience. Builders should note that Hemoxian kits use a proprietary joint system that differs from Bandai or Kotobukiya standards, so posing behavior and hand-grip tightness may require adjustment from builders whose experience is primarily with those brands. Box Contents Red Hood standing body assembly (1) Red Hood crouching body assembly (1) Replacement crossed-arms chest parts (1) Soft PVC coat (1) Hard plastic coat (1) Replacement collar (1) Replacement neck parts (4) Pre-printed face parts (7) Blank face parts (3) Interchangeable hand pairs (6) Wolfsbane sniper rifles (2) Replacement muzzle tips (2) Soft rubber gun strap (1) Magazines (2) Fabric scarves with internal wire (2) Soft rubber harness - standing pose (1) Soft rubber harness - crouching pose (1) Cassette tape player kit (1) Water-slide decal sheets (3) Sticker sheet (1) Display base kit (1) First-batch bonus: Recordable cassette tape (1) First-batch bonus: Cassette storage case (1) Brand Hemoxian License GODDESS OF VICTORY: NIKKE (SHIFT UP Corp.) Character Red Hood Scale 1/12 Height (Standing) 17.5 cm Height (Crouching) 11.5 cm Materials PVC, ABS, Cloth Runner Count 26 (15 pre-painted) Kit Type Snap-fit plastic model kit Release Q4 2026 (estimated) Preorder Notice: This item is currently on preorder and will be shipped once available. Please be aware that cancelling a preorder will incur a 25% restocking fee. For detailed information on our preorder and cancellation policies, please visit our FAQs page.

Official Infinite Nova Retailer LA Scale Model is an authorized retailer of Infinite Nova. All Infinite Nova model kits are 100% genuine and sourced directly from the manufacturer. Overview The Infinite Nova IN ERA+ 1/100 TR-2243EX Azure Falcon is a transformable RMD Series mecha model kit that converts between a streamlined fighter jet mode and a fully articulated humanoid mode. This is the first transformable entry in the RMD lineup, developed using multi-linkage hydraulic technology upgraded from the 1/72 Fenrir and a new pin-latch locking system designed to solve the structural stability problems common in transformable model kits. The Azure Falcon uses ABS construction with alloy reinforcement in structural load-bearing areas and POM components at key joints. IN ERA+ is the consumer model kit brand produced through a collaboration between Infinite Dimension (design) and SNAA (engineering and manufacturing), with the RMD series representing their mechanically dense, full-skeleton product line. Key Features Full Transformation System: Converts between fighter jet mode (43 cm total length) and humanoid mode through a multi-step process using hidden pin-latch locks under the armor, rotational locking joints, and retractable mechanical arms - not a simple lie-down transformation Alloy + POM Reinforced Structure: Alloy mechanical arm supports the backpack assembly, alloy-and-POM combination at the waist core with a notch-and-protrusion half-turn lock, and POM at key joint points for long-term stability Fully Articulated Assembled Fingers: First kit at this scale in the IN ERA+ line to feature fully poseable individual fingers with different-colored fingertips and an internal lever mechanism that locks weapons in place when the wrist is rotated Detailed Cockpit: Opening canopy reveals instrument panel, control stick, buttons, and independently articulating safety harness, with a 15 mm pilot figure assembled from 6 separate parts - the highest cockpit detail level in the IN ERA+ product line Slide-Rail Linked Weapons Bay: Opening the dorsal bay cover causes the grenade launcher to slide forward into firing position automatically, with rotating surveillance probes on both sides Upgraded Multi-Linkage Hydraulic System: Builds on the Fenrir's multi-linkage technology with additional linkage and hydraulic structures in the legs that drive the knee exterior and rear calf simultaneously during bending Dual-Form Balance Design: Both fighter and humanoid modes are designed as complete, uncompromised forms - the head is fully hidden in fighter mode with no visible seams, and the cockpit maintains a level orientation in both configurations Builder Context The Azure Falcon is an advanced build with a high part count and complex transformation engineering. The manufacturer explicitly recommends that all builders - including experienced ones - watch their official video tutorial before beginning assembly, due to the number of new structural mechanisms and lock points involved. The multi-linkage joints, pin-latch systems, and transformation sequence add significant complexity beyond a standard RMD kit. Builders familiar with MG-grade Bandai kits will find the frame-construction approach comparable, but the transformation mechanism and alloy-reinforced joints are closer in complexity to premium transforming kits from brands like Cang Toys. Basic modeling tools including nippers are required. Why Build This Kit The IN ERA+ TR-2243EX Azure Falcon is the first fully transformable model kit in the RMD series, and it represents a fundamentally different engineering approach from the Thunderbolt, Lizard, or Aurora - those are pose-and-display kits, while the Azure Falcon is designed to shift between a 43 cm fighter jet and a fully articulated humanoid using a pin-latch locking system that the manufacturer developed specifically to address the structural fragility problems common in transformable plastic model kits. The articulated assembled fingers with internal lever weapon-locking and the detailed 6-part cockpit interior are features not found on any other kit in the IN ERA+ catalog, and the multi-linkage hydraulic leg system is explicitly described as an upgrade over the Fenrir's technology. At the 1/100 scale price tier, the Azure Falcon competes with Bandai MG kits on shelf presence while offering a transformation system and mechanical density that no current Bandai MG provides. Builders should expect a significantly more involved and challenging build than other RMD releases due to the transformation mechanisms, multiple lock points, and alloy-POM hybrid construction. Box Contents Plastic runner sheets (ABS) Alloy structural components (mechanical arm, waist core parts) POM joint components Pilot figure parts (6 pieces) Assembly manual Specifications Brand Infinite Nova (IN ERA+) Designer Infinite Dimension Series RMD (Real Minutia Designs) Model Number TR-2243EX Product Name Azure Falcon (清渊) Scale 1/100 Material ABS, alloy, POM Fighter Mode Length 43 cm Type Transformable Model Kit Transformation Fighter jet ↔ humanoid Release Date Late August 2026 (estimated) PREORDER Notice:This item is currently on preorder and will be shipped once available. Please be aware that cancelling a preorder will incur a 25% restocking fee. For detailed information on our preorder and cancellation policies, please visit our FAQs page.

Overview The Souling Toys The Sin of Dark Moon is a 1/12 scale assembly model kit that pairs the fantasy warrior Black Moon Lilithia with the towering Audo life form Sin Statue Gord, released as the second wave of the AUDO·RESTORE HEART (奥多生命体：龙之心) IP. The set blends fantasy character sculpting with mechanical surface detailing and is built around an extensive linkage system that connects Lilithia, Gord, and a shared sculpted base into multiple display configurations, including a combined "Ruined Moon" form. Souling Toys (塑灵模玩) is a Chinese third-party studio developing an original fantasy-mecha universe, and this release refines the line with upgraded eye painting, reinforced peg engineering, and alloy weapon grips. Key Features Dual-Subject Diorama Set: Combines a 15 cm Black Moon Lilithia figure, a 29 cm Sin Statue Gord, and a 16 cm sculpted base into one connected display. Pre-Painted Faces and Expression Decals: Five pre-painted face sculpts plus four blank faces, upgraded eye painting, and dedicated Lilithia expression water decals. Mixed-Media Construction: ABS and POM parts combined with alloy weapon grips and a tattered fabric skirt with embedded shaping wire; soft-rubber parts at the leg joints allow dynamic leg posing. Reinforced Gord Engineering: C-clip-free assembly with thicker load-bearing pegs and uniformly upgraded plastic hardness for structural stability on the large body. Extensive Linkage System: Shared "Eroding Moon" device, "Dark Embrace" backpack, and Black Blood Church Candlestick; defeated-Gord parts reattach to Lilithia to form the "Ruined Moon" configuration. Alloy-Grip Signature Weapons: Lilithia's scythe "Eternal Sleep" and Gord's heavy "Ancient Trident" use bend-resistant alloy grips. Pack-In Lore Items: Includes the "To Lilithia Argin" novel and an in-universe Lilithia diary. Builder Context The Sin of Dark Moon suits intermediate builders comfortable with multi-material assembly kits. Construction is snap-fit, and the pre-painted faces plus factory-painted armor make the set display-ready without face painting, though panel lining and topcoating will sharpen the finish. Part count, alloy and fabric components, and the linkage gimmicks place it near MG-grade Bandai complexity, closer to a premium third-party figure kit than a beginner snap build. Why Build This Kit The Souling Toys The Sin of Dark Moon is built for collectors who want a large, story-driven diorama rather than a single figure, since it combines a 15 cm Lilithia figure, a 29 cm Gord creature, and a 16 cm sculpted base into one connected scene. Its defining feature is the linkage system: Gord's parts reattach to Lilithia to form the "Ruined Moon" configuration, and the shared base and "Eroding Moon" device let the two subjects be posed as a single display, which is uncommon among 1/12 character kits that ship as standalone figures. On a shelf, the 29 cm Gord gives the set strong vertical presence, closer in footprint to a large-scale creature kit than to a typical Master Grade Gundam. Compared with Bandai kits at a similar price, buyers are paying for mixed-media construction (alloy weapon grips, a wire-formed fabric skirt, soft-rubber joint parts) and pack-in lore items rather than for the runner efficiency and instruction polish Bandai is known for. Builders should know the faces arrive pre-painted while the rest of the kit benefits from panel lining and topcoat to match the promotional images, and that owners of the first wave, Daylight Meteor, can unlock additional linkage poses with Meteor Middel. Box Contents Sin Statue Gord main body x1 Black Moon Lilithia main body x1 Sin Statue exclusive sculpted base x1 Replacement hands x6 types Pre-painted faces x5 Blank faces x4 Scythe "Eternal Sleep" x1 Backpack "Dark Embrace" x1 Special device "Eroding Moon" x1 Tattered fabric skirt x1 Skirt soft-rubber replacement pieces x3 types Black Blood Church Candlestick x1 Heavy weapon "Ancient Trident" x1 "Daylight Meteor" universal interactive battle effect part x1 Ancient Trident grip replacement parts x4 Sculpted base replacement parts x4 Lilithia rear skirt replacement part x1 Sin Statue palm replacement parts x2 Lilithia backpack replacement part x1 Lilithia "Ruined Moon" form backpack connector x1 Black Moon x1 Universal small bases x3 Universal large base x1 Transparent stand rods x2 sprues Alloy weapon grips x2 Hot-silver water decal x1 Lilithia expression water decals x1 Background U-shaped board x1 "To Lilithia Argin" novel x1 Lilithia's diary x1 Assembly instruction manual x1 Pearlescent after-sales card x1 Specifications Brand Souling Toys (塑灵模玩) Series AUDO·RESTORE HEART (奥多生命体：龙之心), Wave 2 Product Name The Sin of Dark Moon (罪斥黑月) Scale 1/12 Black Moon Lilithia Height Approx. 15 cm Sin Statue Gord Height Approx. 29 cm Base Height Approx. 16 cm Materials ABS, POM, alloy, fabric Assembly Snap-fit assembly kit Release 2026 Q3 Preorder Notice:This item is currently on preorder and will be shipped once available. Please be aware that cancelling a preorder will incur a 25% restocking fee. For detailed information on our preorder and cancellation policies, please visit our FAQs page.

The MS General UBP-A04S Black Panther is a 1/10 scale assembly mecha girl model kit and the second release in the officially licensed Mecha BREAK (解限机) x MS General collaboration line. It adapts the Black Panther striker from the mecha-action game Mecha BREAK into a poseable mecha girl figure, carrying over the unit's dark in-game color scheme and its full weapon loadout, and pairs with the line's first release, the white UBP-R02T Falcon, as the "twin stars" of the in-universe Bifrost Industrial Group. MS General (将魂姬 / Jiang Hun Ji) is a Chinese manufacturer known for color-separated, snap-fit mecha girl kits across lines such as its Seven Deadly Sins and Shadow zodiac series. Key Features Officially licensed Mecha BREAK design - based on the Black Panther striker from the Bifrost Industrial Group. Poseable base body - the underlying figure retains articulation beneath the armor. Swappable melee loadout - the "Svalinn" combat defense shield and "Sol" thermal energy sword interchange freely in hand. Deployable "Skoll" shield - secondary defensive shield with an expanding/articulated structure. Extendable "Alsvid" heavy lance - telescoping cavalry-lance weapon replicating its in-game form. Color-separated, snap-fit construction - reaches its base colors without painting, consistent with the series. Builder Context This is an intermediate-friendly snap-fit kit that does not require cement, with the dark armor and accent colors achieved through molded color separation rather than paint, leaving panel lining and a top coat as optional finishing steps. In construction approach it sits alongside Bandai's 30MS line and Kotobukiya's Megami Device kits, but at a larger 1/10 scale and built around a single licensed character. Why Build This Kit The MS General UBP-A04S Black Panther is the kit to buy for Mecha BREAK players who want the Black Panther striker rendered as a buildable 1/10 mecha girl, and it is the second entry in the game's official model-kit collaboration after the white UBP-R02T Falcon. Its appeal is weapon flexibility rather than raw part count: the Svalinn combat shield and Sol thermal energy sword swap freely in hand, the Skoll secondary shield deploys, and the Alsvid heavy lance extends, so one figure covers melee, defensive, and lance poses. In build approach it is comparable to Bandai's 30MS mecha girl line, using color-separated, snap-fit parts that reach their base colors without painting, but it is a larger 1/10 scale and a fixed licensed character rather than a customizable system. Buyers should know this is a fresh pre-order announced as a color-scheme reveal, so MS General has not yet published the assembled height, plastic types, or runner count. Anyone who already builds 30MS or Megami Device kits will find the construction familiar, with the Mecha BREAK license being the main reason to choose it over a generic mecha girl kit. Box Contents Black Panther mecha girl base body and color-separated armor parts "Svalinn" combat defense shield "Sol" thermal energy sword (interchangeable with the Svalinn shield) "Skoll" deployable secondary shield "Alsvid" extendable heavy lance Specifications Brand MS General (将魂姬 / Jiang Hun Ji) Series Mecha BREAK (解限机) x MS General Mecha Girl Series (2nd release) Model Number UBP-A04S Character Black Panther (黑豹) Scale 1/10 Type Assembly mecha girl model kit Assembly Snap-fit, color-separated (no cement required) Height Not yet published (pre-order) Material Not yet published (pre-order) Release July 2026 Preorder Notice:This item is currently on preorder and will be shipped once available. Please be aware that cancelling a preorder will incur a 25% restocking fee. For detailed information on our preorder and cancellation policies, please visit our FAQs page.

Official Infinite Dimension RetailerLA Scale Model is an authorized retailer of Infinite Dimension and Animester. All Infinite Dimension and Animester model kits are 100% genuine and sourced directly from the manufacturer. Overview The Sky Blaze (Unit 03) is a 1/72 scale snap-fit action model kit from the Core Crystallizer series, produced as a joint release between Animester and Infinite Dimension under the Infinite Rank product line. Designed around a heavy-assault concept with a core energy-pulse motif, the kit centers on a sniper-cannon loadout and a fully articulated multi-layer internal frame. It stands roughly 32 cm at the main body and approximately 38 cm in its full-armor configuration, with over 25 pre-painted runners that include metallic-finished armor parts. Key Features Multi-layer internal frame: targeted load-bearing structure with reinforced key joints for stable, high-tension poses. POM gear joint system: gear-driven ratchets at the hips, knees, and ankles produce click-stop positioning, with a high-strength integrated hip axle. Near 80% leg armor articulation: multi-stage linked waist structure allows deep forward-lean and back-bend poses. Pre-painted metallic parts: over 25 pre-sprayed runners, with metallic-color parts finished using a detailed multi-stage coloring process. Five-axis precision tooling: parts cut on five-axis machinery for sharp surface detail. Heavy weapons loadout: two pulse rifles, two heavy sniper cannons, and a tactical backpack. Upgraded exclusive display base: high-strength chassis with multi-position adjustable bracket slots that lock height and angle, plus replaceable bracket heads. Builder Context This is an intermediate to advanced build aimed at experienced hobbyists. It is a snap-fit kit with pre-painted metallic parts, so paint is optional rather than required, and the multi-layer inner frame and gear-joint engineering place it closer to MG-grade Bandai kits than to beginner snap kits in assembly complexity. Why Build This Kit The Animester x Infinite Dimension Sky Blaze (Unit 03) is built for collectors who want a large-format third-party mecha with a display-ready finish out of the box, since it ships with over 25 pre-painted runners and metallic-finished armor that remove the need for painting. In its full-armor configuration it stands roughly 38 cm, giving it a much larger shelf footprint than a standard 1/100 Master Grade kit despite its 1/72 scale, driven by the sniper-cannon and backpack loadout. Its multi-layer internal frame and POM gear joints at the hips, knees, and ankles are engineered to hold large action poses, placing its articulation closer to MG-grade Bandai kits than to entry-level snap kits. Builders should know the load-bearing structure relies on POM ratchet gears that click-stop at each angle, so heavy weapons like the twin sniper cannons are intended to be balanced through the joints and the included display base rather than through hand grip alone. The first-batch release adds two semi-translucent blue ion saber effect parts, which are not guaranteed on later production runs. Box Contents Sky Blaze main body x1 Pulse Rifle x2 Heavy Sniper Cannon x2 Tactical Backpack x1 Posing hands x5 pairs (gripping, charging, fist, relaxed, open) Sky Blaze exclusive display base x1 Three-claw mechanical arm x2 Leg smoked-clear (black translucent) replacement parts x2 First-batch bonus: Ion Saber x2 (semi-translucent blue) Specifications Brand Animester x Infinite Dimension Product Line Infinite Rank Series Core Crystallizer Unit Unit 03 (Sky Blaze) Scale 1/72 Height (Main Body) approx. 32 cm Height (Full-Armor Form) approx. 38 cm Material ABS, POM Assembly Snap-fit, pre-painted Release Q4 2026 Preorder Notice:This item is currently on preorder and will be shipped once available. Please be aware that cancelling a preorder will incur a 25% restocking fee. For detailed information on our preorder and cancellation policies, please visit our FAQs page.

The SO.SKILL x Eastern Model 1/12 The Nine-Tailed Fox Da Ji is a snap-fit, full-articulation plastic model kit produced as a collaboration between SO.SKILL (圣斯基) and Eastern Model (御模道) for the long-running ATK Girl line. The kit depicts the nine-tailed fox Da Ji and converts between a light form and a fully armored "berserk" configuration through swappable limbs, a swappable head, and a rear-mounted Nine-Tail Annihilation System. ATK Girl is Eastern Model's articulated female figure series, and this release introduces a newly tooled base body with revised proportions, updated face sculpts, and reinforced one-piece arm and leg parts. Key Features Dual Light and Armed Forms - swap the limbs and head and attach the Nine-Tail system to convert between the unarmed light form (approx. 17 cm) and the armored form (approx. 19 cm). Nine-Tail Annihilation System - a rear-mounted array of eight articulated mechanical tails with multi-segment joints, integrated thrusters, and six transparent "Huanmei" blades that slide out and detach for hand-held use. Ten Face Options - five pad-printed expression faces plus five blank faces for water-slide decal customization, all swapped by removing the front hair base. Transformable Ninth-Tail "Qingshi" Weapon - a single hand-held armament that functions as both a staff and a rifle and stows on the Nine-Tail system's weapon rack as the ninth tail. Newly Tooled Base Body - revised proportions with one-piece arm and leg parts and combination interlocking joints, described by Eastern Model as a no-fall-off articulation upgrade over earlier ATK Girl bodies. Posing Accessories - multiple replacement hand pairs plus OK, pointing, and finger-heart gestures, a wire-cored fur boa for the light form, six thruster effect parts, and a universal display stand. Material and Finish - PVC/ABS parts with a matte finish and slightly translucent skin-tone plastic; red markings and panel lines applied via the included water-slide decal sheet. Builder Context This is a snap-fit kit suited to beginner and intermediate builders, with no cement required and pad-printed faces and pre-colored armor that allow a complete look without painting. Decal application and light seam cleanup are the main finishing steps. The build and articulation are comparable to other ATK Girl machine girl kits and to entry-level Bandai 30MS figures, though reviewers note loose ball joints and tight leg joints that benefit from careful handling. Why Build This Kit The SO.SKILL x Eastern Model 1/12 The Nine-Tailed Fox Da Ji is best suited to collectors of articulated machine girl figures who want a kit that displays in two distinct configurations rather than a single fixed pose. Its main point of difference within the ATK Girl line is the newly tooled base body, which uses one-piece arm and leg parts and revised proportions that depart from the thinner limbs of earlier releases in the series. On a shelf the light form stands about 17 cm and the armed form about 19 cm, placing it close in height to a Bandai 30MS kit but with a denser accessory count, including ten face options and the multi-tail Nine-Tail Annihilation System. Compared with snap-fit Bandai kits at a similar price, Da Ji reaches a display-ready look without painting thanks to pad-printed faces and pre-colored armor, but the red detailing relies on the included water-slide decals rather than molded color separation. Builders should know that reviewers report loose ball joints, tight hip joints, and small parts such as the side bangs and tail blades that can pop off during handling, so gluing select connection points and easing tight joints is recommended before posing. Box Contents Da Ji main body (light form) x1 Pad-printed replacement faces x5 Blank faces x5 Replacement hand pairs x4 "OK" hand x1 Pointing hand x1 Finger-heart hand x1 Replacement front bangs x1 "Tianhu Face Armor" (天狐面甲) armed-form head x1 "Pouxin Claw" (剖心爪) armed arms x1 pair "Zhonggu Hook" (踵骨钩) armed legs x1 pair Nine-Tail Annihilation System (玖尾歼灭系统) x1 "Qingshi" (倾世) ninth-tail staff/rifle x1 Thruster effect parts x6 Wire-cored fur boa accessory x1 Water-slide decal sheet x1 Universal display stand x1 Specifications Brand SO.SKILL x Eastern Model (御模道) Series ATK Girl Character The Nine-Tailed Fox Da Ji Scale 1/12 Type Full articulation plastic model kit Height (Light Form) approx. 17 cm Height (Armed Form) approx. 19 cm Runners 26 Material PVC / ABS Assembly Snap-fit (no cement required) Finish Matte, pre-colored; water-slide decals included Face Options 10 (5 pad-printed, 5 blank) First-Edition Note Light-pink armed-form hair; standard release uses two dark-tone hair parts Preorder Notice:This item is currently on preorder and will be shipped once available. Please be aware that cancelling a preorder will incur a 25% restocking fee. For detailed information on our preorder and cancellation policies, please visit our FAQs page.

Overview The Orange Cat Industry x Wave Corporation 1/35 ARX-8 Laevatein is a large-format assembly model kit based on the iconic Arm Slave from the Full Metal Panic! Invisible Victory anime series. This version recreates the Laevatein in its Last Decisive Battle configuration, bundled with the XL-3 Emergency Deployment Booster that Sousuke Sagara uses during the final arc of the series. The kit is a collaboration between Orange Cat Industry, a Chinese manufacturer known for high-detail licensed kits, and Wave Corporation, a Japanese hobby company with decades of experience in mecha and sci-fi model engineering. Key Features 100 Runners with 13 Pre-Painted Plates: Multi-color injection molding with 13 runners of factory-painted parts covering metallics and accent details, reducing the need for hand-painting to achieve a display-ready finish. Built-In LED Light Units: Includes LED modules for the camera eyes, heat dissipation lines, and cockpit interior - no aftermarket lighting kits required. Full Weapon Loadout: Ships with the 165mm Demolition Gun (with folding gimmick), GRAW-4 Monomolecular Cutter, and Lambda Driver Canceller ("Fairy's Feather"), all faithfully recreating the Laevatein's in-series armament. XL-3 Emergency Deployment Booster: The massive dorsal booster from the final battle is included as a separate assembly with a 46.5 cm wingspan, mountable to the Laevatein or displayable alongside it on the included stand. POM Joint Construction: Dedicated POM material runners for joint components provide long-term articulation stability and resistance to stress whitening. Sectioned Runner Organization: All 100 runners are sorted and bagged by body section, keeping the build manageable despite the high part count. Articulated Pilot Figure: Includes a poseable cockpit pilot figure with an openable head unit for cockpit display. Builder Context This is an advanced-level build suited to experienced modelers comfortable with high part counts and extended assembly sessions. The 114-page instruction manual guides the builder through an inner frame-first construction sequence. The kit uses snap-fit assembly but the volume and complexity - 100 runners across a mech and a full booster unit - place it closer to a Bandai Perfect Grade in scope and build time. Three types of decals are included: waterslide decals, adhesive sticker sheets, and 3D detail stickers for color correction on small parts. Springs and wire are also included for mechanical detail construction. Why Build This Kit The Orange Cat Industry x Wave 1/35 ARX-8 Laevatein is currently the most comprehensive plastic model kit of the Laevatein available from any manufacturer, surpassing both the Bandai 1/60 HG and the Aoshima 1/48 ACKS versions in scale, part count, and accessory density. At 24 cm tall with a booster wingspan of 46.5 cm, the completed build has display presence comparable to a Bandai Perfect Grade, and the included LED units for the eyes, cockpit, and heat dissipation lines mean it looks display-ready without aftermarket electronics. Builders familiar with large-format third-party kits from brands like Motor Nuclear or DLKHobby will find the build philosophy similar - inner frame first, sectioned runner bags, POM joints - but the licensed Full Metal Panic! IP and Wave Corporation co-development set this apart from original-IP Chinese mecha kits. This is not an entry-level kit: the 100-runner count and 114-page manual make it a project build best suited to hobbyists who have completed at least a few MG or PG-tier kits and are comfortable with multi-session assembly. Box Contents 100 runners (including 13 pre-painted runner plates) POM joint runners LED light units (head, torso, cockpit) Articulated pilot figure 165mm Demolition Gun (with folding gimmick) GRAW-4 Monomolecular Cutter Lambda Driver Canceller ("Fairy's Feather") XL-3 Emergency Deployment Booster assembly Display stand (supports both Laevatein and XL-3 Booster) Waterslide decal sheet Adhesive sticker sheet 3D detail sticker sheet (for color correction) Film/membrane decal sheet Springs and wire 114-page instruction manual Line art card Specifications Brand Orange Cat Industry x Wave Corporation Series Full Metal Panic! Invisible Victory Character ARX-8 Laevatein - Last Decisive Battle Ver. Scale 1/35 Height Approx. 24 cm (9.4 in) XL-3 Booster Wingspan Approx. 46.5 cm (18.3 in) Runner Count 100 (including 13 pre-painted) Materials ABS, POM, PVC LED Units Included (head, torso, cockpit) Instruction Manual 114 pages Product Type Plastic assembly model kit (snap-fit) Country of Origin China Preorder Notice: This item is currently on preorder and will be shipped once available. Please be aware that cancelling a preorder will incur a 25% restocking fee. For detailed information on our preorder and cancellation policies, please visit our FAQs page.