Backorder

Official SNAA RetailerLA Scale Model is an authorized retailer of SNAA. All SNAA model kits are 100% genuine and sourced directly from the manufacturer. About the SNAA SC-009 Divine Invoker Percival Deluxe Edition The SNAA SC-009 Divine Invoker Percival Deluxe Edition is a 1/144 scale model kit from the Beyond Exquisite (BE) Round Table Knights series. Percival belongs to the Sanctuary tier - the highest of three ranks in the Round Table Knights lineup (Gale, Steel Knight, and Sanctuary) - and represents a knight-class mecha designed for both long-range suppression and close-range combat. SNAA is a Chinese original-IP manufacturer known for Western fantasy-themed mecha designs, and the Round Table Knights line is their most popular series among NA builders. The Deluxe Edition represents Percival in its Awakening Sword Formation mode, which adds a complete set of seven individually named relic weapons, four translucent particle cloak panels, a Sword Formation backpack, and a dedicated weapon display base. These Deluxe-exclusive accessories allow the kit to be displayed with all seven weapons floating in a circular formation around the unit - a dramatic shelf configuration that sets this edition apart from the Standard version. Key Features Deluxe "Awakening" Sword Formation Mode: Includes seven named relic swords and blades, four translucent particle cloak panels, and a Sword Formation backpack - exclusive to the Deluxe Edition. Full Inner Skeleton: Fully articulated internal frame with linked joints across head, torso, shoulders, hips, and knees for dynamic posing. Pre-Painted Outer Armor: Select armor panels come pre-painted over multi-color separated parts for a clean finish out of the box. Weapon Display Base: Dedicated display stand allows all seven weapons to be arranged in a floating Sword Array formation around the unit. Approximately 21 Runners: Includes main unit runners, cloak components, sword array base parts, and accessory runners. Waterslide Decals: Full waterslide decal sheet included for markings and fine details. Round Table Knights Compatibility: Frame design allows part-swapping with other kits in the Round Table Knights BE line. Builder Context The Percival Deluxe Edition is recommended for intermediate to advanced builders due to its dense part count and complex weapon configuration options. Construction is snap-fit with no cement required, comparable to an RG-grade Bandai kit in terms of part density and articulation complexity. Builders familiar with Bandai Real Grade kits or other SNAA Round Table Knights entries will find the assembly straightforward, though posing the full sword array requires careful weight distribution across the display base. Why Build This Kit The SNAA SC-009 Divine Invoker Percival Deluxe Edition is the most accessory-heavy entry in the 1/144 Round Table Knights lineup, with seven individually named relic weapons, translucent particle cloaks, and a dedicated weapon display base included in the box. At 17 cm tall, SNAA's 1/144 kits are comparable in size to Bandai 1/100 scale kits, giving Percival significantly more shelf presence than its scale designation suggests. The pre-painted armor panels and snap-fit construction mean the finished build looks display-ready without painting, making it accessible to builders comfortable with RG-grade Bandai kits who want an original design outside the Gundam universe. Builders new to SNAA should be aware that hand joints on Round Table Knights kits tend to be looser than Bandai equivalents - posing the larger swords requires balancing weapon weight across both hands and the display base rather than relying on grip strength alone. At its current price point, the Percival Deluxe Edition offers more accessories and display options per dollar than most Bandai HG or RG kits, which is a consistent pattern across the SNAA BE line. Box Contents SC-009 Divine Invoker Percival main unit runners (approximately 21 runners total) Summoning Scepters x2 Authority Backpack x1 Particle Cloak Panels x4 Sword Formation Backpack x1 Judgement (Greatsword) x1 Eagle Eye (Sword) x1 Windcleaver (Sword) x1 Rockbreaker (Sword) x1 Voidrend (Sword) x1 Shadowedge (Blade) x1 Flashstrike (Blade) x1 Weapon display base Waterslide decal sheet Instruction manual Specifications Brand SNAA Series Beyond Exquisite (BE) - Round Table Knights Model Number SC-009 Product Name Divine Invoker Percival - Awakening / Deluxe Edition Scale 1/144 Height Approx. 17 cm (to head) Materials ABS, Polystyrene Construction Snap-fit assembly, no cement required Decals Waterslide decals included Runner Count Approximately 21 Recommended Age 15+ SKU snaa-be-07 Backorder Notice:This item is currently on backorder and will be shipped once available. Please be aware that cancelling a backorder will incur a 25% restocking fee. For detailed information on our backorder and cancellation policies, please visit our FAQs page.

Official SNAA RetailerLA Scale Model is an authorized retailer of SNAA. All SNAA model kits are 100% genuine and sourced directly from the manufacturer. The Tristan – Titan Greatsword Type from the Round Table Knight Series is a 1/144 scale close-combat mecha model, serving as the commanding unit of the legendary knight squad. Within its ranks are Steel Sickle Kai and two additional knight units, forming an elite melee-focused team. Key Features: Scale and Line: 1/144 scale, part of the SNAA-exclusive Round Table Knight Series. Combat Role: Specializes in close-quarters combat with heavy melee weaponry and high defensive capabilities. Design Details: Features intricately molded golden Celtic battle engravings across its armor surface, evoking an ancient warrior aesthetic. Armaments: Comes equipped with a massive Titan Greatsword, the ceremonial Oathblade, and a Runic Shield which stores the Oathblade within. Release Information: Released as part of SNAA’s high-detail 1/144 model line, the Tristan unit represents a symbolic oathbound knight. Its appearance and accessories reflect a fusion of medieval mythology with futuristic mecha design. “When the wail of the Titan Greatsword resounds across the battlefield, the knight's oath is fulfilled.”The Tristan – Titan Greatsword Type is ideal for builders seeking elegant melee-themed mecha with rich symbolic flair and distinct lore. Backorder Notice:This item is currently on backorder and will be shipped once available. Please be aware that cancelling a backorder will incur a 25% restocking fee. For detailed information on our backorder and cancellation policies, please visit our FAQs page.

Official Infinite Dimension Retailer LA Scale Model is an authorized retailer of Infinite Dimension. All Infinite Dimension model kits are 100% genuine and sourced directly from the manufacturer. Overview The Infinite Dimension 1/100 RT-002 Nemesis is a flagship mecha model kit from the Advanced Strategic Revenge Titan (A.S.R.T.) series, released to mark Infinite Dimension's 10th anniversary under the In ERA+ product line. As only the second standalone Infinite Dimension kit after the original Genesis, the Nemesis represents the brand's most ambitious engineering effort to date - featuring a triple-layer build architecture, 14 pre-painted metallic runners, and a weapon system built around eight transformable Vengeance Blades that double as deployable wing units. Infinite Dimension is a premium Chinese mecha brand known for intricate mechanical sculpting and complex layered internal frames, operating alongside its collaboration sub-brand Infinite Nova. Key Features Triple-Layer Build Architecture - Assembly progresses through three distinct stages: basic skeleton, meridian frame (gold and silver mechanical detailing layer), and full exterior armor, each forming a complete display-worthy form 14 Pre-Painted Metallic Runners - Gold, silver, and rose gold metallic runners with hidden gate marks, plus matte blue-black metallic paint on dark outer armor panels, delivering display-ready color separation without painting Transformable Vengeance Blade System - Eight modular blades that convert between sword and gun modes, combinable into curved swords, spike rifles, great swords, and wing-blade formations mounted on the backpack Full Armor Deployment Mechanisms - Linked hatches across shoulders, chest, knees, calves, and rear skirt open to reveal inner frame mechanical detail, with the shoulder armor featuring synchronized four-panel deployment Backpack-Mounted Cockpit - Detailed cockpit with pilot figure, display screen sculpting, and purple transparent canopy, located in the backpack rather than the chest due to the reactor core occupying the chest cavity Functional Display Base - Included system base (30 x 22.5 cm) with weapon storage slots, maintenance arm assembly, and support rod for aerial posing Pre-Assembled Joint Option - Major joints come with optional pre-assembled POM joint units for tighter hold and better weight support, alongside traditional assembly joints for builders who prefer smoother articulation feel Builder Context The RT-002 Nemesis is an advanced-level build with an estimated assembly time of 9-10 hours across its three-layer architecture. The kit is snap-fit and does not require cement, but the POM joint assemblies can be very tight and some wrist connections may require careful tool-assisted fitting. The full-color instruction manual follows a staged build process similar to PG Unleashed, with supplementary video guides available via QR code for tricky assembly steps. Comparable in engineering ambition to Bandai's MGEX or PG Unleashed lines, the Nemesis offers a build experience that advanced third-party kit builders and experienced MG/PG modelers will find rewarding. Why Build This Kit The Infinite Dimension RT-002 Nemesis is the brand's 10th anniversary flagship and its most content-dense kit to date, making it the definitive showcase of what Infinite Dimension's engineering can deliver at the 1/100 scale. The triple-layer skeleton-to-armor build progression and 14 pre-painted metallic runners give it a premium unboxing and assembly experience that no current Bandai MG can match in structural layering, while the included commemorative artbook documents the design process from concept sketches to final tooling. At 22 cm to the head and roughly 45 cm wide with wing blades deployed, the Nemesis has dominant shelf presence comparable to a PG kit in visual footprint, despite being 1/100 scale. Builders familiar with the Einta Industries Canopy or other premium third-party kits in the $120-$200 range will find the Nemesis competitive on part count and accessory density, though they should note that the pre-assembled POM joints produce a stiff, creaky feel during posing - builders who prioritize smooth joint action should opt for the included traditional assembly joints instead. Box Contents Nemesis model runners (40+ runners including 14 pre-painted metallic runners in gold, silver, rose gold, and matte blue-black) Purple transparent parts runners Pre-assembled POM joint units (optional use) 8 x Vengeance Blade weapon assemblies (transformable sword/gun mode) Red blade components (curved sword formation) Spike gun components Wing blade components (x4) Great sword assemblies (x2, convertible to rifle mode) Shield claw assemblies (x2, claw/pincer mode switchable) Metal etching parts sheet Etched metal nameplate 3D sticker sheet Water transfer decal sheet Display base with weapon storage slots and maintenance arms Metal support rod / kickstand Cardboard runner organizer trays (x2) Full-color instruction manual with QR code video guides Commemorative design artbook (concept art, line art, development records) Brand Infinite Dimension / In ERA+ Series Advanced Strategic Revenge Titan (A.S.R.T.) Model RT-002 Nemesis Scale 1/100 Height (to head) Approx. 22 cm Height (with backpack) Approx. 27 cm Display Width (wings deployed) Approx. 45 cm Weight (full armor) Approx. 440 g Material ABS, PS, POM Backorder Notice:This item is currently on backorder and will be shipped once available. Please be aware that cancelling a backorder will incur a 25% restocking fee. For detailed information on our backorder and cancellation policies, please visit our FAQs page.

Official SNAA RetailerLA Scale Model is an authorized retailer of SNAA. All SNAA model kits are 100% genuine and sourced directly from the manufacturer. SNAA 1/144 BE The Round Table Knights – Achilles Model Kit The SNAA 1/144 Round Table Knights – Achilles is a high-mobility mecha designed for fast assault, precision defense, and adaptable combat performance. Featuring two distinct battle modes and a signature articulated shield system, Achilles delivers an impressive level of versatility within the Round Table Knights lineup. Key Features Dual Combat Modes: Achilles can shift between “Gale Type I” for rapid approach tactics and “Duel Type II” for close-range engagements. Lys Blades: Equipped with two Lys Blades optimized for swift melee strikes. Advanced Shield System: The “Rapid God Shield” mounts on articulated mechanical arms for directional defense. Inside the shield are a concealed Armor-Piercing Claw and the Annihilation Cannon for ranged attacks. Dynamic Articulation: The frame supports a wide range of expressive poses, enabling both defensive formations and high-speed combat stances. High-Detail Engineering: Sharp molding and clean part separation characteristic of SNAA’s 1/144 Round Table Knights series. Description As the speed-oriented member of the Round Table Knights, Achilles excels in both interception and precision assault. The articulated shield system allows for realistic directional blocking, mid-motion transformations, and long-range firing poses based on its built-in weaponry. The included mechanical arms, dual shields, and Lys Blades offer a flexible loadout suitable for various display styles. This model is designed to integrate seamlessly with other members of the Round Table Knights series, complementing units such as Lancelot, Percival, and Gawain through its agility-driven combat role. Box Contents Main body × 1 Replacement hands × 6 Lys Blades × 2 Rapid God Shields × 2 Articulated mechanical arms × 2 Water decal sheet × 1 Specifications Brand SNAA Series Round Table Knights Model Achilles Scale 1/144 Material Plastic Release Window 2024 Backorder Notice:This item is currently on backorder and will be shipped once available. Please be aware that cancelling a backorder will incur a 25% restocking fee. For detailed information on our backorder and cancellation policies, please visit our FAQs page.

ZZA 1/100 GZSS-OX REGUS Model Kit The ZZA 1/100 GZSS-OX REGUS is the second release in the GZSS series, representing the Regus Captain Unit. Designed as a high-output propulsion and heavy laser firepower platform, Regus serves as the core assault unit within the lineup, emphasizing aggressive presence and battlefield dominance. Key Features GZSS Series Release: Second entry in the GZSS model kit lineup. 1/100 Scale Assembly Kit: Large-scale mecha model with articulated structure. High-Output Combat Design: Emphasizes powerful propulsion systems and heavy laser-based weaponry. Captain Unit Configuration: Distinctive design and loadout representing the Regus command unit. Customizable Armor: Includes alternate color outer armor parts to support builder customization and DIY color selection. Weapons and Equipment M-26 Energy Storage Cannon ×1 Anti-Beam Composite Shield ×1 Standard Beam Saber ×2 High-Power Beam Saber ×2 Included Parts GZSS-OX Regus main body (1/100 scale) ×1 Alternate color outer armor parts ×1 set Specifications Brand ZZA Series GZSS Model GZSS-OX REGUS Scale 1/100 Product Type Plastic assembly model kit Armor Options Alternate color outer armor parts included Backorder Notice:This item is currently on backorder and will be shipped once available. Please be aware that cancelling a backorder will incur a 25% restocking fee. For detailed information on our backorder and cancellation policies, please visit our FAQs page.

Official SNAA Retailer LA Scale Model is an authorized retailer of SNAA. All SNAA model kits are 100% genuine and sourced directly from the manufacturer. SNAA BE 1/144 The Round Table Knights - Gods Guardian Gawain Model Kit The SNAA BE 1/144 Gods Guardian Gawain is a highly detailed, articulated builder kit from SNAA’s Beyond Exquisite (BE) lineup, styled as an original Round Table Knights mecha design. This is a Third Party Gundam Gunpla Like Mecha Model Kit and is not affiliated with Bandai or the Gundam franchise. Key Features Scale: 1/144 scale model kit in the SNAA BE series. Build Style: Designed for dynamic posing once assembled, with a focus on compact, RG-like presentation. Detailing: Emphasizes sharp armor separation and mechanical surface detail for display. Markings: Includes marking accessories (such as decals and sticker materials) depending on production batch and distributor listing. Loadout: Includes weapon accessories for display-ready configurations, as commonly listed by major retailers. Box Contents Gawain model kit parts Weapon accessories Marking accessories (decals and or stickers as listed by retailer) Instruction manual Specifications Brand SNAA Series Beyond Exquisite (BE) - The Round Table Knights Model Gods Guardian Gawain Model Code SC-003 Scale 1/144 Material Plastic (material may vary by listing) Backorder Notice:This item is currently on backorder and will be shipped once available. Please be aware that cancelling a backorder will incur a 25% restocking fee. For detailed information on our backorder and cancellation policies, please visit our FAQs page.

SNAA 1/100 YR-02 Emperor Series Blade King Model Kit The SNAA 1/100 YR-02 Blade King is a highly detailed, poseable original mecha kit from SNAA’s Emperor Series. This is a Third Party Gundam Gunpla Like Mecha Model Kit and is not affiliated with Bandai or the Gundam franchise. Designed with a Master Grade-sized presence, the kit features a fully movable internal skeleton, strong color separation, and a display-oriented design supported by a reinforced display base. Key Features Scale and Size: 1/100 scale, approximately 21 cm tall to the top of the head (antenna height not included). Internal Structure: Built with a fully movable internal skeleton for dynamic posing. Detailing: Clean color separation and layered part division for a sharp mechanical appearance. Markings Included: Standard water decals included. Display Support: Includes a reinforced display base designed to support action poses. Backpack Gimmick: The bladed components mounted on the backpack can be combined with the shield to form multiple configurations, allowing for varied display and play options. Box Contents Blade King main body parts Shield and backpack blade components Reinforced display base Standard water decals Instruction manual Specifications Brand SNAA Series Emperor Series Model YR-02 Blade King Scale 1/100 Height Approx. 21 cm (head height, antenna excluded) Markings Water decals Display Base Reinforced base included Backorder Notice:This item is currently on backorder and will be shipped once available. Please be aware that cancelling a backorder will incur a 25% restocking fee. For detailed information on our backorder and cancellation policies, please visit our FAQs page.

Official SNAA Retailer LA Scale Model is an authorized retailer of SNAA. All SNAA model kits are 100% genuine and sourced directly from the manufacturer. SNAA 1/144 BE The Round Table Knights – Thunder Incise Grace Model Kit The SNAA 1/144 BE The Round Table Knights – Thunder Incise Grace is a plastic model kit offering detailed articulation and a balanced weapons loadout for dynamic posing. As part of SNAA’s Beyond Exquisite lineup, this kit delivers a compact 1/144 scale build suitable for both newer builders and seasoned hobbyists who enjoy expressive model displays. Product Highlights 1/144 scale model kit from SNAA’s Round Table Knights series Fully articulated frame for dynamic display poses Includes a set of weapon accessories to equip Thunder Incise Grace for varied engagements Plastic construction with detailed molding Compatible with other Round Table Knights kits for expanded shelf displays Instructions may or may not include English text depending on batch Description Thunder Incise Grace is crafted to offer a solid and poseable build experience in mini-mecha format. Its articulation and proportion allow for expressive stances once complete, and the included weapons help recreate varied combat displays. The model’s design maintains visual coherence with the broader Round Table Knights thematic lineup, blending mechanical form with a stylized silhouette suitable for shelf or diorama presentations. This kit is recommended for hobby builders comfortable with standard model assembly processes including nub removal, fitting, and optional finishes like panel lining or decals. Box Contents Main Thunder Incise Grace unit parts Weapon accessory set Instruction manual Specifications Brand SNAA Series The Round Table Knights (Beyond Exquisite) Model Thunder Incise Grace Scale 1/144 Material Plastic (injection molded) Articulation Full articulation Instructions Included (language varies) Backorder Notice:This item is currently on backorder and will be shipped once available. Please be aware that cancelling a backorder will incur a 25% restocking fee. For detailed information on our backorder and cancellation policies, please visit our FAQs page.

IMPORTANT MANUFACTURE UPDATE Additional reprints are available for Thor, but the manufacture is no longer making Thor with the preorder bonus items (the cape). Preorder Details Please read our Preorder FAQ carefully before placing the order. Product Description He Mo Xian (和模线) NZS-05-3 Legend of Thor, God of Thunder. Product Features Material: Plastics (ABS/POM/PVC etc.) Height: 22.5 cm Item Type: Model Kits Scale: 1/100 Box Contents 1 x main figure 2 x hand cannon 1 x backpack 1 x hammer 1 x eye-lighting part 1 x water slide decal

ZZA Model 1/100 GZSS-OX G.U.S Model Kit The ZZA Model 1/100 GZSS-OX G.U.S is an original mecha plastic model kit from ZZA Model. This is a Third Party Gundam Gunpla Like Mecha Model Kit and is not affiliated with Bandai or the Gundam franchise. Listed at 1/100 scale and produced in PVC and ABS, this kit is designed to deliver a clean, display-ready build with included markings and effect parts. Key Features Scale: 1/100 scale model kit. Materials: PVC and ABS. Markings Included: Includes a sheet of marking decals. Effect Parts: Includes a large beam sword effect part as shown in retailer details. Figure Detail: Includes a pilot figure as shown in retailer images and build review content. Approximate Height: Described as approximately 21 cm tall in retailer build notes. Box Contents GZSS-OX G.U.S model kit parts to build the figure Marking decal sheet Beam sword effect part Pilot figure Instruction manual Specifications Brand ZZA Model Model GZSS-OX G.U.S Scale 1/100 Material PVC, ABS Height Approx. 21 cm Markings Marking decals included Category Third Party Gundam Gunpla Like Mecha Model Kit Backorder Notice:This item is currently on backorder and will be shipped once available. Please be aware that cancelling a backorder will incur a 25% restocking fee. For detailed information on our backorder and cancellation policies, please visit our FAQs page.

Official Motor Nuclear Retailer LA Scale Model is an authorized retailer of Motor Nuclear. All Motor Nuclear model kits are 100% genuine and sourced directly from the manufacturer. Overview The Motor Nuclear MNP-XH15 Lu Bu is a Valiant Grade plastic model kit from the Legend of Star General series, inspired by the legendary Chinese warrior Lu Bu. This is the long-awaited assembly model kit version of Motor Nuclear's flagship mecha - the original MNQ-05X pre-built figure was the product that put Motor Nuclear on the international map five years ago, and the MNP-XH15 delivers that same design in a full plastic model kit format built around a pre-assembled zinc alloy inner frame. Motor Nuclear's Legend of Star General line reimagines Chinese historical and mythological figures as large-format, intricately detailed mecha, and Lu Bu - historically regarded as the most fearsome warrior of the Three Kingdoms era - serves as the series' centerpiece. Key Features Pre-Assembled Zinc Alloy Inner Frame: A full metal skeleton arrives pre-assembled in separate packaging, providing weight, rigidity, and stable posing support for the finished build's 25.5 cm height and broad shoulder span. 738 Parts Across 45 Runners: One of the highest part counts in the Legend of Star General lineup, with gold pre-painted parts, metallic dark gray parts with a subtle purple tone, glossy black parts, bright silver accents, and a large proportion of transparent red components backed with silver paint for layered depth. Four Primary Weapons with Modular Combination System: Includes the Fang Tian Hua Ji halberd, two distinct bows (Xing Yun Shooting Bow and Fang Yun She Gong), and a Ji Yun Sword. Weapons interconnect via dedicated connector units into additional configurations including the Po Tian Zhua claw gauntlet, a cape/cloak silhouette, a shield form, and a composite large bow. Fully Articulated Head Plumes: Each of the two plumes consists of 20 segmented parts threaded onto a rubber-coated flexible wire core, allowing virtually any curve or pose. Multi-Segment Skirt Armor with Mechanical Articulation: Front and rear skirt armor panels feature multi-section hinge systems for dynamic posing. Side skirts extend downward to increase leg clearance, and rear skirt panels mechanically spread outward when pushed at the upper tips. Horse-Riding Articulation Built In: Hip joints include lateral bend and a drop-down extension specifically designed for compatibility with the upcoming Red Hare (Chi Yan Huo Long Ju) mecha mount, with forearm rotation cuts for weapon versatility in mounted poses. Display Base with Storage Function: Includes a themed display base with built-in storage compartments and separate transparent accessory stands. Builder Context The MNP-XH15 Lu Bu is an advanced-level build suited for experienced builders comfortable with high part counts and alloy frame integration. Assembly is snap-fit with pre-colored and pre-painted parts - no cement or painting is required for a display-ready result. At 738 parts across 45 runners, the build complexity exceeds most Bandai MG kits and is comparable in density to Motor Nuclear's MNP-XH05 Zhao Yun. Builders should note that Motor Nuclear parts are known for sharp edges due to precise mold tolerances - quality side cutters and light sanding are recommended. Why Build This Kit The Motor Nuclear MNP-XH15 Lu Bu is the definitive kit in the Legend of Star General series - the brand's flagship character finally available as a full plastic model kit after five years as a pre-built figure only. At 25.5 cm with a 19.5 cm shoulder span and a full zinc alloy inner frame, Lu Bu has significantly more shelf presence and heft than any Bandai MG of comparable height, and the aggressive gold-and-dark-gray color scheme with extensive transparent red accents makes it one of the most visually striking kits in the current third-party mecha market. The modular weapon combination system - where four base weapons reconfigure into claws, capes, shields, and composite bows - provides more display variety from a single kit than most competitors offer across an entire product line. Builders already invested in the Legend of Star General series should know that Lu Bu's hip and leg articulation is specifically engineered for the upcoming Red Hare mecha mount, making this the first half of what will be Motor Nuclear's largest combined display piece. For builders new to Motor Nuclear, the MNP-XH05 Zhao Yun or the MNP-CR01 Huan Ci are more commonly recommended starting points due to their lower part counts, but experienced builders who want Motor Nuclear's most ambitious kit to date will find the MNP-XH15 Lu Bu delivers on both build complexity and finished display impact. Box Contents 45 runners (738 parts total) including gold pre-painted, metallic dark gray, glossy black, bright silver, and transparent red components Pre-assembled zinc alloy inner frame (separately packaged) Fang Tian Hua Ji halberd Xing Yun Shooting Bow with functional draw mechanism Ji Yun Sword (connects to Xing Yun Bow) Fang Yun She Gong bow with alloy center connector Weapon connector units and body-mount adapters for combination configurations Metal mechanical arm for back-mounted weapon display Interchangeable hands (10 total) Rubber-coated flexible wire for head plumes Display base with storage compartments Transparent accessory display stands Name sticker Instruction manual Specifications Brand Motor Nuclear Series Legend of Star General (Valiant Grade) Model Number MNP-XH15 Character Lu Bu Height Approx. 25.5 cm (to head) Shoulder Width Approx. 19.5 cm Materials ABS, POM, Zinc Alloy Parts Count 738 Runner Count 45 Inner Frame Pre-assembled zinc alloy Assembly Type Snap-fit plastic model kit EAN 6972147749279 Product Type Third-Party Mecha Model Kit Backorder Notice:This item is currently on backorder and will be shipped once available. Please be aware that cancelling a backorder will incur a 25% restocking fee. For detailed information on our backorder and cancellation policies, please visit our FAQs page.

Official Motor Nuclear Retailer LA Scale Model is an authorized retailer of Motor Nuclear. All Motor Nuclear model kits are 100% genuine and sourced directly from the manufacturer. Overview The Motor Nuclear MNP-XH03 Ao Bing is an original IP mecha model kit from the Legend of Star General series, inspired by the Chinese mythological figure Ao Bing - the son of the Dragon King and bearer of the Azure Dragon. The kit features fully pre-painted parts, an alloy inner frame, and includes a separately buildable Cold Killing Dragon combat support droid alongside the main mecha. Motor Nuclear is a Chinese manufacturer known for high-detail, mythology-themed mecha kits with alloy-reinforced construction and premium part separation. Key Features Alloy Inner Frame - 23 alloy parts form the core skeleton, providing weight, stability, and joint retention for dynamic posing even with full armor attached. Fully Pre-Painted Parts - All armor and detail parts come pre-painted with no stickers or waterslide decals required. The finished build is display-ready straight from the box. Under-Gated Runners - Gate marks are placed on non-visible surfaces wherever possible, minimizing cleanup on exposed armor panels. Cold Killing Dragon - A fully buildable articulated dragon combat support droid is included as a separate display piece with its own stand. Weapon Loadout - Includes a longsword, spear, fluorescent effect parts, and 6 interchangeable hands per side for a wide range of posing options. Display Stands - Dedicated display bases included for both the Ao Bing mecha and the Cold Killing Dragon. Builder Context This is an advanced-level kit with approximately 810 parts across 46 runners and a build time reported at roughly 30-40 hours by experienced builders. The alloy inner frame and pre-painted parts make it comparable in complexity and presentation to a Bandai MG Ver.Ka kit, though the construction approach is distinct - parts fit together via snap-fit and friction rather than Bandai's polycap system. Builders should have nippers, a hobby knife, and fine sandpaper on hand. Some joints - particularly peg-style connections on the dragon - are known to be very tight and benefit from light sanding before assembly to prevent breakage. Why Build This Kit The Motor Nuclear MNP-XH03 Ao Bing is widely considered the standout kit in the Legend of Star General series and one of the best entry points into the Motor Nuclear brand for builders coming from Bandai MG or RG kits. The combination of fully pre-painted parts, under-gated runners, and an alloy inner frame means the finished build has a premium display presence without requiring any painting or decal work, which makes it accessible to intermediate builders comfortable with complex part counts but not yet invested in painting equipment. At 23 cm, Ao Bing has strong shelf presence for a 1/72-equivalent kit, and the included Cold Killing Dragon adds a second display piece that most kits in this price range do not offer. Builders should be aware that some peg joints on the dragon subassembly run tight from the factory and require sanding to move safely - this is a known characteristic across multiple production runs, not a defect in individual copies. Box Contents Ao Bing mecha (pre-painted runners with alloy inner frame parts) Cold Killing Dragon combat support droid Longsword Spear Fluorescent effect parts Interchangeable hands (6 per side) Display stand for Ao Bing Display stand for Cold Killing Dragon Instruction manual Series Legend of Star General Product Code MNP-XH03 Height Approximately 23 cm Materials ABS, alloy inner frame Total Parts Approximately 810 Runners 46 Alloy Parts 23 Main Body Weight Approximately 270 g Total Weight with Accessories Approximately 625 g Pre-Painted Yes Stickers/Decals Required No EAN 6972147740269 Package Dimensions 20.6 x 14.4 x 6.1 inches Package Weight Approximately 2.3 kg Release 2023 Manufacturer Motor Nuclear Backorder Notice:This item is currently on backorder and will be shipped once available. Please be aware that cancelling a backorder will incur a 25% restocking fee. For detailed information on our backorder and cancellation policies, please visit our FAQs page.

Overview The Iron Toys 1/100 Star Destroyer 星灭 is a third-party mecha model kit built around a die-cast alloy inner frame, released in the manufacturer's "Star Destroyer" (星灭) line. Its silhouette draws heavily on the Exia-style aesthetic — a slim, blade-focused close-combat mecha — reinterpreted with metal internals for added weight and shelf stability. Iron Toys (铁创模型) is a Chinese third-party maker known for pairing alloy skeletons with fully styrene outer armor, and this standard release is the fuller-featured version of the line, shipping with an LED lighting set and a dedicated display base that the Dark Age and TC Prototype variants do not include. Key Features Die-cast alloy inner frame: Metal skeleton adds heft and holds poses more securely than an all-plastic frame. LED lighting set included: Integrated lighting for accent illumination on the finished build. Display base included: Dedicated stand for dynamic, aerial, or action posing. Exia-inspired close-combat design: Slim proportions and a blade-forward silhouette in the 1/100 form factor. ABS/PS outer armor: Injection-molded plastic panels over the metal core for a mixed-media build. High articulation: Multiple points of movement supported by the alloy frame. Builder Context This is an intermediate-to-advanced kit: it is largely snap-fit, but builder feedback notes a couple of spots benefit from cement, and the sharp, pointed armor edges reward careful nub cleanup and sanding. The die-cast frame gives it a hand-feel and weight closer to a mixed-media MG-grade Bandai kit than to a snap-only HG, and painting is optional but recommended for builders who want to hide seams and match the metal-and-plastic surfaces. Why Build This Kit The Iron Toys 1/100 Star Destroyer 星灭 is the version to buy for builders who want the complete package rather than the bare kit — it is the only trim in the Star Destroyer line that bundles both an LED lighting set and a display base, where the Dark Age and TC Prototype releases ship without them. The die-cast alloy inner frame gives the finished model real weight and a lower center of gravity, so a slim, blade-focused Exia-style figure stands and holds action poses more confidently than an equivalent all-plastic 1/100. At roughly 20 cm it reads as a compact MG-scale display piece, and its build experience sits between snap-fit and cement-assisted, comparable to a mixed-media Bandai Master Grade in complexity but with more metal in hand. Buyers should know the armor is a notably sharp, pointed design, so trimming and light sanding of edges is worth the time, and the English instructions are not guaranteed, which makes it better suited to builders who have completed a few kits than to a first-timer. Box Contents Runners for the complete Star Destroyer 星灭 model kit Pre-assembled or snap-together die-cast alloy inner frame components LED lighting set Display base (x1) Interchangeable / accessory parts Assembly instructions (English translation not guaranteed) Specifications Manufacturer Iron Toys (铁创模型) Model Name Star Destroyer (星灭) Scale 1/100 Height Approx. 20 cm (verify against box; line variants range 20–23 cm) Frame Die-cast alloy inner frame Armor Material ABS / PS plastic Lighting LED lighting set included Display Base Included (x1) Assembly Snap-fit with some cement recommended Skill Level Intermediate–Advanced Backorder Notice:This item is currently on backorder and will be shipped once available. Please be aware that cancelling a backorder will incur a 25% restocking fee. For detailed information on our backorder and cancellation policies, please visit our FAQs page.

Overview The Sheik Mainland 3MIN Project-A Fenrir A6 Assault Type is a 1/18 scale mecha model kit and the heavy-assault tactical variant of the original Fenrir A2 Standard Type. Roughly half the runners are entirely new molds, covering a redesigned head, chest armor, shoulder armor, shin armor, tactical comms backpack, skirt armor, and a significantly expanded weapon and hand type loadout. Each box includes two complete Fenrir A6 kits, and the model supports three official configurations - CQC (Battle Armor), LA (Light Assault), and FA (Full Armor) - plus an undocumented transformation into a mechanical locust form using the existing joints and armor structure. Key Features Three Official Configurations - CQC Battle Armor for maximum protection, LA Light Assault for mobility-focused loadouts, and FA Full Armor for the heaviest weapon and armor coverage. Standard Type shoulder and knee armor parts are included for additional light-configuration options 8 Pairs of Hand Types - Five pairs feature wrist lateral articulation for natural weapon-holding angles. Includes fist (with movable thumb), pointing/finger-gun (with movable thumb), open palm (with four-finger inward bend), angled-grip pairs in both square and round hole variants for different weapon handles, and one bonus pair of POK wrist reinforcement joints for long-term durability Expanded Heavy Weapon Loadout - Rocket launcher with detachable warhead and rotatable grip/scope, assault rifle, micro submachine gun, tactical machete, dagger, grenade, and arm shield. All weapons are cross-compatible with the Standard Type Fenrir Tactical Comms Backpack - Rear-mounted radio module that detaches as a standalone display prop. The antenna is made from flexible soft rubber to resist white stress marks and breakage during handling Improved Joint Tuning - Upper waist tightened, lower waist loosened, and hip ball joints recalibrated compared to the Standard Type. Joint damping is more consistent across the entire body, and the knee joint no longer risks stress marks from over-tight assembly Rear-Mounted Skirt Armor - Both halves pivot from the rear on ball joints, allowing them to swing clear for forward kicks, side kicks, and deep crouching poses. Front skirt is a separate piece that flips upward independently Two Complete Kits Per Box - Standard packaging includes two full Fenrir A6 units with all accessories Builder Context The Fenrir A6 Assault Type assembles in approximately 10-15 minutes per unit using optimized single-gate runner design with no tools, adhesives, or painting required. Build time is longer than the Standard Type due to the additional armor and weapon parts but remains beginner-friendly. The instruction manual has known diagram errors at step 5 (hip joint orientation shown inverted) and mislabeled part numbers on the arm assembly - builders should match parts by shape rather than relying solely on the printed part numbers. The 3mm port system is fully compatible with Bandai 30MM, Kotobukiya MSG, and other Sheik Mainland 3MIN series accessories including the Xenostrike, Xentinel, and Worker Bee lines. Why Build This Kit The Sheik Mainland Fenrir A6 Assault Type is the recommended starting point for the 3MIN Project-A series if choosing between the A6 and the Standard Type, because it delivers significantly more accessories, improved joint tuning, and greater configuration variety at the same price tier. Chinese reviewer consensus from multiple July 2026 build videos confirms that the A6's wrist lateral articulation - present on five of the eight hand pairs - resolves the most common complaint about 1/18 scale kits: unnatural weapon-holding angles, particularly with longer rifles. At approximately 11 cm tall, the Fenrir A6 packs articulation density comparable to Bandai's RG line into a kit that costs under $15 per unit (two per box), making it one of the highest value-to-articulation ratios currently available from any manufacturer at any scale. The A6 does not replace the A2 Standard Type - the two designs are visually distinct enough to display well together, and the A6 includes the Standard Type's original shoulder and knee armor as alternate parts. Builders should note that the A6 does not include the small display stand that comes with the Standard Type, and the thicker shin armor slightly reduces maximum knee bend compared to the A2. Box Contents 2x Fenrir A6 Assault Type runner sets (approximately half new-mold runners) New-mold head, chest armor, shoulder armor, shin armor, and knee armor parts Standard Type shoulder armor and knee armor parts (for light configuration) Tactical comms backpack with detachable radio module and soft rubber antenna Rear-mounted skirt armor with ball-joint pivot assembly Rocket launcher (detachable warhead, rotatable grip and scope) Assault rifle Micro submachine gun Tactical machete Dagger Grenade Arm shield 8 pairs of hand types (5 with wrist lateral articulation, 1 POK reinforcement pair) Shoulder-mounted weapon hardpoint adapters Ball-joint to straight-peg connector adapters Angled connector adapters (for offset shield mounting) Assembly instructions Specifications Series 3MIN Project-A Scale 1/18 Height Approximately 11 cm (head height) Materials PS, POK (composite joints and bonus wrist joints), soft rubber (backpack antenna) Kit Count 2 per box Assembly Time Approximately 10-15 minutes per unit Construction Snap-fit, no tools or adhesives required Configurations CQC (Battle Armor), LA (Light Assault), FA (Full Armor) Hand Types 8 pairs (5 with wrist lateral articulation) Compatibility 3mm universal hardpoints (30MM, MSG, Sheik Mainland 3MIN series) Display Stand Not included Release July 2026 Manufacturer Sheik Mainland Backorder Notice:This item is currently on backorder and will be shipped once available. Please be aware that cancelling a backorder will incur a 25% restocking fee. For detailed information on our backorder and cancellation policies, please visit our FAQs page.

Infinite Nova 1/100 PMD In Era+ Aurora Model Kit The Infinite Nova 1/100 PMD In Era+ Aurora is a premium original mecha model kit from the Infinite Dimension In Era+ Perfaction Metal Design (PMD) series. The Aurora features a pre-assembled gold-plated diecast alloy inner frame paired with injection-molded plastic outer armor, delivering structural rigidity and a high-end finish straight from the box. Extensive pre-painted part separation and color division across the outer armor reduce the need for painting, achieving a near-complete appearance with assembly and decals alone. Standing approximately 23 cm (9.05 inches) tall at 1/100 scale, the Aurora is fully articulated and includes a dedicated display stand and a comprehensive weapon loadout spanning melee and ranged options. Key Features PMD (Perfaction Metal Design) Inner Frame: Pre-assembled diecast alloy skeleton with gold plating, providing a rigid and durable core structure. Pre-Painted Outer Armor: Specially colored and high-precision pre-painted plastic armor panels achieve a polished look with minimal additional finishing work. Extensive Part Separation: Multi-tone color division across armor segments reduces paint requirements and provides detail surpassing standard snap-fit builds. Full Articulation: Enhanced joint engineering at the waist, hips, and shoulders supports a wide range of dynamic ground and aerial poses. Comprehensive Weapon Set: Includes a spear, blaster rifle, two knives, a beam blade, and two beam knives for multiple configuration options. Dedicated Display Stand: Included action base supports low-flying thrust poses and heavy-weapon display configurations. Water Slide Decals and Metallic Stickers: Full decal suite included for additional panel and sensor detail without painting. Box Contents Aurora outer armor parts (plastic) × 1 set Pre-assembled gold-plated alloy inner frame × 1 Spear × 1 Blaster rifle × 1 Knives × 2 Beam blade × 1 Beam knives × 2 Hand option set × 1 Display stand × 1 Water slide decal sheet × 1 Metallic sticker sheet × 1 Assembly manual × 1 Specifications Brand Infinite Dimension / Infinite Nova Series In Era+ PMD (Perfaction Metal Design) Product Name Aurora (曙光) Scale 1/100 Height Approx. 23 cm / 9.05 in Material Diecast alloy (inner frame), injection-molded plastic (outer armor) Inner Frame Pre-assembled, gold-plated diecast alloy Box Dimensions 400 × 320 × 170 mm Box Weight Approx. 2.2 kg Release Date Q2 2024 (China); mid-2024 (international) Product Type Plastic and alloy assembly model kit Backorder Notice:This item is currently on backorder and will be shipped once available. Please be aware that cancelling a backorder will incur a 25% restocking fee. For detailed information on our backorder and cancellation policies, please visit our FAQs page.

Official Nuke Matrix Retailer LA Scale Model is an authorized retailer of Nuke Matrix All Nuke Matrix model kits are 100% genuine and sourced directly from the manufacturer. Nuke Matrix Cyber Forest Cyclone Hopper Model Kit The Nuke Matrix Cyber Forest Cyclone Hopper is a highly articulated original mecha girl kit from Nuke Matrix’s Cyber Forest lineup. This is a Third Party Gundam Gunpla Like Mecha Model Kit and is not affiliated with Bandai or the Gundam franchise. The kit combines a humanoid character body with modular armor systems, a transformable combat motorcycle, and extensive wind-themed effect parts designed for high-mobility action displays. Key Features Dual Body Configuration: Includes both a human body and an armored body, allowing multiple display states. Vehicle Integration: Comes with the Storm Chaser motorcycle, designed to pair directly with the Cyclone Hopper character. Effect Parts: Includes multiple wind-based and attack effect parts such as Spines Cutter, High-pressure Air Cutter, Cyclone Kick, and spiral effects. Pre-painted Runners: Select runners are pre-painted to enhance surface detail straight out of the box. Display Support: Action base included for dynamic airborne and combat poses. Customization: Multiple face plates, hand types, feet options, and armor components included for varied expressions and setups. Compatibility: Includes three different neck joint sizes, compatible with other mecha girl kits on the market. Box Contents Human body x1 Armour body x1 Storm Chaser motorcycle x1 Insect Instrument Unit (helmet) x1 Backpack x1 Strike Trampler x2 Orthoptera Booster x2 Spines Cutter effect parts x2 Spines Cutter Mode II effect parts x2 High-pressure Air Cutter effect parts x2 QianJi Spiral effect part x1 Spiral Cut effect part x1 Cyclone Kick effect part x1 Armour hands x6 pairs Standard hands x7 pairs Pre-printed face plates x5 Blank face plates x5 Sneaker feet x1 pair Naked feet x2 pairs Cloth suit x1 set Matrix Driver - Acrididae Type I x1 Water decals x2 Action base Different size neck joints x3 Instruction manual Specifications Brand Nuke Matrix Line Cyber Forest Model Name Cyclone Hopper Product Type Third Party Gundam Gunpla Like Mecha Model Kit Decals Water decals included Pre-painted Parts Some runners pre-painted Display Base Action base included Compatibility Multiple neck joint sizes included for cross-compatibility Backorder Notice:This item is currently on backorder and will be shipped once available. Please be aware that cancelling a backorder will incur a 25% restocking fee. For detailed information on our backorder and cancellation policies, please visit our FAQs page.

DLKHobby 1/100 ZAW-S01 Ikaruga - Universal Space Type The DLKHobby 1/100 ZAW-S01 Ikaruga (Universal Space Type) is a 1/100 scale mecha model kit produced by DLKHobby (Dilei Ke) and manufactured by Dalin. Built around a precision multi-layer skeleton system, the Ikaruga features a three-stage construction sequence - core skeleton, detailed mechanical frame, then outer armor - delivering both structural integrity and visible mechanical depth at every layer. The kit ships with 99 runners and includes a first-batch bonus of two sets of transparent replacement outer armor, allowing builders to expose the layered internal frame while maintaining a finished display appearance. Key Features Multi-Layer Skeleton System: Three-stage build process starts with a core skeleton, adds a color-separated mechanical frame (frame gray, metallic gray, and iron red), then covers with outer armor - each layer visible through optional transparent armor panels First-Batch Transparent Armor: Two sets of clear replacement armor panels included, allowing partial or full swap to reveal the detailed internal skeleton Matte-Finish Outer Armor: All outer armor parts feature a factory matte coating that gives a flat-coat appearance straight out of the box, reducing visible surface imperfections Extensive Articulation with Linked Mechanisms: Double-jointed elbows with linked hydraulic piston detail, sliding hip joints with two lock positions, and double-jointed knees with armor panels that shift in sequence during bending Full Weapon Arsenal: Includes combination beam rifle, oversized extending cannon, large shield, two beam sabers with interchangeable blade lengths, and four detachable funnel/drone units that combine into multiple configurations Interchangeable Head Components: Two forehead options (spiked and smooth), two visor styles (transparent horned and green gem), and a gray transparent full-face mask for alternate display looks UV-Reactive Parts: All transparent green and yellow parts produce a fluorescent glow under UV/blacklight Builder Context The Ikaruga is an intermediate-to-advanced build with 99 runners and a multi-stage skeleton assembly. It is snap-fit construction with mostly hidden gate marks, though some parts have larger gates that require cleanup. The yellow thruster nozzles on the shoulder armor are loose-fitting and may need glue to stay secure. Builders familiar with MG-grade Bandai kits will find the complexity and part count comparable, with additional mechanical linkage details that go beyond typical Bandai engineering. Why Build This Kit The DLKHobby 1/100 ZAW-S01 Ikaruga is one of the highest-value third-party mecha kits available at its price point, offering 99 runners, a full weapon loadout, and a multi-layer skeleton system for under $90 USD. The three-stage skeleton construction gives the finished build visible mechanical depth that most 1/100 kits - including Bandai MG - do not attempt, and the included transparent armor means builders can show off the internal frame without any aftermarket purchases. At approximately 24.8 cm (9.75 inches) tall before weapons, the Ikaruga has strong shelf presence comparable to large MG kits, and the factory matte finish means the kit looks display-ready without topcoating. Builders should note that the funnel/drone weapons are heavy enough to require the included transparent support stands for stable display, and the shoulder thruster nozzles will need a small amount of glue to prevent drop-off during handling. Box Contents 99 runners (ABS/PVC construction) Two sets of transparent replacement outer armor panels Combination beam rifle (with beam saber attachment capability) Oversized extending cannon with auxiliary handles Large shield 2 beam sabers (interchangeable long and short blade parts, foldable sword/gun mode) 4 funnel/drone units (detachable, combinable into drone configuration) 5 pairs of interchangeable hands (fists, open hands, knife hands, gripping hands, gun-holding hands) 2 forehead parts (spiked and smooth) 2 visor types (transparent horned, green gem) Gray transparent full-face mask Display stand with weapon rack arms 4 transparent articulated support bases with ring attachments Waterslide decal sheet Aluminum foil detail sticker sheet Instruction manual Specifications Brand DLKHobby (Dilei Ke) Manufacturer Dalin Product ZAW-S01 Ikaruga - Universal Space Type Scale 1/100 Height Approx. 24.8 cm (9.75 in) Runner Count 99 Materials ABS, PVC Construction Snap-fit assembly, multi-layer skeleton Skeleton Colors Frame gray, metallic gray, iron red Armor Finish Factory matte coating Product Type Plastic assembly model kit Backorder Notice:This item is currently on backorder and will be shipped once available. Please be aware that cancelling a backorder will incur a 25% restocking fee. For detailed information on our backorder and cancellation policies, please visit our FAQs page.

Souling Toys 1/12 Daytime Meteor Mecha Musume White Dragon Model Kit The Souling Toys 1/12 Daytime Meteor Mecha Musume White Dragon Model Kit is a striking third-party figure model that blends mecha styling with “mecha-musume” character design. Featuring articulated build structure and a range of weapons and accessories, this kit delivers character personality with mechanical flair at a 1/12 scale suitable for display collectors and customizers alike. Product Highlights 1/12 scale mecha musume model kit with articulated build White Dragon character styling with mechanical accents Multiple external armor parts and weapons for pose variety Color-separated plastic runners for crisp assembly with minimal paint Designed for display and character interpretation poses Includes decals/stickers for detailed markings Description The White Dragon “Daytime Meteor” merges a stylized female mecha character with detailed mechanical design elements. This model kit embraces both aesthetic personality and functional structure through articulation points at major joints, allowing a wide range of expressive poses. Armor and weapon accessories enhance the theme and add visual interest for display. Ideal for collectors who enjoy original IP mecha musume kits, this build balances character appeal with mechanical complexity, making it a versatile addition to a shelf, diorama, or photography setup. Box Contents White Dragon main body parts Armor and mechanical detail runners Weapon accessories Interchangeable hands Display stand support Decal sheet Assembly manual Specifications Brand Souling Toys Model Daytime Meteor – White Dragon Scale 1/12 Kit Type Third-party mecha musume model kit Articulation Full poseable joints Includes Armor, weapons, decals, display stand Backorder Notice:This item is currently on backorder and will be shipped once available. Please be aware that cancelling a backorder will incur a 25% restocking fee. For detailed information on our backorder and cancellation policies, please visit our FAQs page.

Bandai China 2023 Limited Edition MG 1/100 Cross Contrast Colors Wing Gundam Zero EW Bandai China Estimated Release Date: December 2023 Estimated Delivery: Late~Early Feburary 2024 Grade: MG Scale: 1/100 Please read our Preorder FAQ carefully before placing the order.  

Official Infinite Nova Retailer LA Scale Model is an authorized retailer of Infinite Nova. All Infinite Nova model kits are 100% genuine and sourced directly from the manufacturer. Infinite Nova 1/100 In Era+ RMD Lizard – Premium Model Kit The Infinite Nova 1/100 In Era+ RMD Lizard Premium Model Kit is a next-generation mecha crafted under the In Era+ concept line, combining elaborate mechanical layering, reinforced joint engineering, and a signature reptilian silhouette inspired by high-mobility close-combat frames. The RMD Lizard features heavy armor segmentation, integrated sub-thrusters, and multiple mount points for weapon and equipment expansion, offering a premium build experience for third-party mecha collectors. Key Features In Era+ Engineering: Enhanced structural density with upgraded articulation for the waist, hips, and shoulders, supporting dynamic ground and aerial poses. Layered Armor Design: Multi-segment armor plates with deep mechanical sculpting, characteristic of Infinite Nova’s premium-grade molding. Reptilian Combat Aesthetic: A unique head unit, claw-inspired extremities, and tail-compatible rear assembly (varies by equipment version) emphasize a beast-mecha hybrid design. Weapon Systems: Includes a modular melee weapon set and ranged equipment loadout, allowing multiple configuration styles. Expansion-Ready Build: Designed within the In Era+ ecosystem, compatible with optional effect parts, equipment packs, and terrain display kits released by Infinite Nova. Premium Plastic Quality: Crisp part separation and durable materials suitable for display, posing, and customization work. Description RMD Lizard is designed as a high-output frontline unit within the In Era+ world concept. Its armor layering and reinforced limb structure emphasize explosive power, while its streamlined thruster layout supports quick repositioning during combat. The optional tail-mount section and modular weaponry allow for distinct silhouette variations, appealing to both builders and customizers. As a premium Infinite Nova release, the kit offers a dense building experience with carefully engineered joints, expressive posing capability, and multi-tone part separation that reduces paint requirements for a finished look. Box Contents Main body parts × 1 set Inner mechanical frame components × 1 set Weapon set (melee + ranged) × 1 Optional auxiliary weapon parts × 1 Hand option set × 1 Backpack / thruster assembly × 1 Effect-compatible mounting points × several Water decal sheet × 1 Assembly manual × 1 Specifications Brand Infinite Nova Series In Era+ Model RMD Lizard Scale 1/100 Grade Premium Model Kit Material Plastic Type Third-Party Gundam Gunpla Like Mecha Model Kit BACKORDER Notice:This item is currently on backorder and will be shipped once available. Please be aware that cancelling a backorder will incur a 25% restocking fee. For detailed information on our backorder and cancellation policies, please visit our FAQs page.