Backorder

Official Motor Nuclear Retailer LA Scale Model is an authorized retailer of Motor Nuclear. All Motor Nuclear model kits are 100% genuine and sourced directly from the manufacturer. Motor Nuclear MNP-CR02A Type-65 JiHu-II Assault Ver. Model Kit The Motor Nuclear MNP-CR02A Type-65 JiHu-II (Assault Ver.) is a 1/48 scale mecha model kit from the Blazing Stars sub-line within Motor Nuclear's Legend of Star General series. Built around a full die-cast alloy inner frame, the JiHu-II is a land warfare assault mecha drawing its design language from modern tanks and armored vehicles - riveted armor plates, lifting lugs, tread-equipped feet, and a green military color scheme with gradient depth. Motor Nuclear's Blazing Stars (CR) line focuses on military-styled mecha units distinct from the mythology-driven XH character kits, and the JiHu-II is one of the most anticipated entries in the series. Key Features Full Die-Cast Alloy Inner Frame: Complete metal skeleton comes partially pre-assembled, providing weight, rigidity, and stable posing for an imposing display presence 30+ Point Deployable Armor System: Outer armor panels open independently across the entire body to reveal internal mechanical structures, simulating a maintenance/overhaul mode with linked mechanical movement Massive Weapon Arsenal: Automatic rifle with detachable magazines, concealed forearm grenades, thigh-mounted daggers, two grenade launchers (standard and revolver-type with swing-out cylinder), missile pod with linked deployment, a Chinese-style halberd, shield with sliding armor panels, and two back-mounted mechanical arms for ammunition transfer Dual Interchangeable Heads: Standard twin-eye head and mono-eye head with optional face mask attachment, each with distinct antenna configurations 663 Parts Across 34 Runners: Approximately 600 pre-painted parts with optimized runner layout for an improved build experience over previous Motor Nuclear releases LED-Ready Construction: Pre-cut slots at the chest, eyes, and cockpit for aftermarket LED installation (LEDs not included) 1/48 Scale Pilot Figure and Display Base: Includes a buildable pilot figure with two head options and a standard display base Builder Context The JiHu-II Assault Ver. is an intermediate-level kit suited for builders with at least a few snap-fit kits under their belt. Assembly is snap-fit with pre-colored parts and does not require cement or painting for a complete look, though panel lining and topcoating will bring out the military surface detail. The alloy inner frame arrives partially pre-assembled. At 663 parts across 34 runners, build complexity exceeds most Bandai MG kits and is comparable to a large Real Grade in terms of part density, with the added step of integrating die-cast frame components. Water slide decals are included for final detailing. Why Build This Kit The Motor Nuclear MNP-CR02A JiHu-II Assault Ver. is the most weapon-dense kit in the Blazing Stars line, with over ten distinct armaments that store, mount, and combine across the frame in ways that reward posing experimentation. The 30+ point deployable armor system sets it apart from other kits at this price point - no other sub-$110 mecha kit from any manufacturer currently offers a full-body maintenance mode reveal. At 22.5 cm and 1/48 scale with a full alloy frame, the JiHu-II has noticeably more heft and shelf presence than a Bandai MG of similar height, and the military-realist design language appeals to builders who find Gundam aesthetics too anime-styled. Motor Nuclear's runner layout and undergating have improved significantly with this release compared to earlier Legend of Star General kits, making it a reasonable entry point into the brand for builders comfortable with RG-grade Bandai kits. Builders should note that Motor Nuclear parts are known for sharp edges due to precise mold tolerances - side cutters and light sanding are recommended, and the alloy frame joints may need minor adjustment for optimal tension. Box Contents 34 runners (approximately 600 pre-painted parts, 663 total) Die-cast alloy inner frame components (partially pre-assembled) Standard twin-eye head Mono-eye head with optional face mask Automatic rifle with detachable magazines 2 x concealed forearm grenades 2 x thigh-mounted daggers Standard grenade launcher Revolver-type grenade launcher with swing-out cylinder Missile pod with linked deployment mechanism Chinese-style halberd Shield with sliding armor panels 2 x back-mounted mechanical arms Rear skirt ammo resupply rack with 4 removable magazines Interchangeable hand parts 1/48 scale pilot figure (2 head options) Display base Water slide decals Assembly instructions Specifications Series Legend of Star General - Blazing Stars Manufacturer Motor Nuclear Model Code MNP-CR02A Designation Type-65 JiHu-II (Assault Ver.) Scale 1/48 Height Approx. 22.5 cm (8.9 inches) to head Parts Count 663 parts across 34 runners Materials ABS, POM, PVC, die-cast alloy EAN 6972147749521 Backorder Notice:This item is currently on backorder and will be shipped once available. Please be aware that cancelling a backorder will incur a 25% restocking fee. For detailed information on our backorder and cancellation policies, please visit our FAQs page.

Robox Animation RB-P-02 Cantonese Heavy Utility Vehicles Guangdong Cockroach Model Kit The Robox Animation RB-P-02 Guangdong Cockroach is a large-scale, highly articulated original mechanical creature model kit designed as a heavy-duty utility and assault platform. Inspired by industrial machinery and insect-based biomechanics, this kit features a multi-segmented body structure, oversized armor shells, and extensive mechanical detailing throughout the internal and external assemblies. Key Features Oversized Mechanical Insect Design: Cockroach-inspired silhouette with reinforced armor plating and articulated limbs. Large Finished Size: Assembled length exceeds approximately 14 inches, creating a strong visual presence. Multi-Joint Articulation: Segmented legs, body sections, and appendages allow for crawling, climbing, and attack poses. Modular Armor Construction: Layered shell components reveal internal mechanical structures. Transformable Components: Rear shell and body segments support expanded and combat-ready configurations. Industrial Aesthetic: Heavy machinery styling combined with bio-mechanical detailing. Mechanical Systems and Effects LED Lighting Unit: Integrated LED system for the core and sensor areas. Rotating Head Assembly: Head unit supports directional posing and attack orientation. Expandable Wing and Shell Mechanisms: Armor panels deploy to simulate combat and movement states. Rear Exhaust and Thruster Details: Mechanical exhaust structures integrated into the back assembly. Accessories and Included Parts Main cockroach mechanical body components Multi-segment articulated legs Expandable armor shell parts LED lighting unit Internal mechanical frame components Effect and detail parts Instruction manual Specifications Brand Robox Animation Model RB-P-02 Guangdong Cockroach Product Line Cantonese Heavy Utility Vehicles Scale Non-scale Material ABS plastic Lighting LED unit included Assembly Type Plastic model kit Backorder Notice:This item is currently on backorder and will be shipped once available. Please be aware that cancelling a backorder will incur a 25% restocking fee. For detailed information on our backorder and cancellation policies, please visit our FAQs page.

EDDAS Valkyrie 1/100 Mecha Model Kit The EDDAS Valkyrie 1/100 Mecha Model Kit is a detailed and high-impact build featuring multiple signature weapons, replaceable components, and articulated structure. Designed with premium materials and a dynamic equipment set, Valkyrie stands as a showcase model in the EDDAS lineup. Key Features 1/100 scale mecha model kit with dynamic mechanical design and articulation. Constructed from POM, ABS, PS, and zinc alloy for durability and stability. Approximately 21 cm tall when fully assembled. Comprehensive weapons and effect parts lineup included for versatile display options. Clear support stands for reliable posing in flight or action configurations. Multiple armor and weapon connection components enhance display versatility. Description Valkyrie is engineered for combat adaptability, equipped with a robust shield system (D·FANG·Shield), paired long blade (D·FANG·Great Sword), dual rare elemental tachi blades, and multiple specialized D·FANG blade variations in Aurora mode configurations. Clear stands and base support allow for immersive action poses and aerial arrangements. With high mechanical detail and a broad accessory set, this kit offers both visual sophistication and display flexibility — ideal for builders and collectors who enjoy intricate weapons systems and articulated mecha poses. Box Contents Valkyrie main body × 1 D·FANG·Shield × 1 D·FANG·Great Sword × 1 Rare Element Tachi × 2 D·FANG Composite Hand Blade × 1 D·FANG Type-I × 4 (Aurora Mode) D·FANG Type-II × 4 (Aurora Mode) Monitor color-correction stickers × 1 D·FANG transparent support stands × 8 Aurora Mode outer armor display connectors × 8 Retractable display stand arm × 1 Display base × 1 Marking decal sheet × 1 Valkyrie assembly manual × 1 Specifications Brand EDDAS Model Valkyrie Scale 1/100 Height Approx. 21 cm Materials POM, ABS, PS, Zinc Alloy Kit Type Third-party plastic mecha model kit Backorder Notice:This item is currently on backorder and will be shipped once available. Please be aware that cancelling a backorder will incur a 25% restocking fee. For detailed information on our backorder and cancellation policies, please visit our FAQs page.

Nilson Works Monument-FX | PG 1/60 Mecha Model Kit The Nilson Works Monument-FX is a premium PG-scale 1/60 mecha model kit featuring an angelic dual-wing configuration, long-form weapon system, and 801 total parts for a large-format building experience. With reinforced internal waist engineering designed to support heavy wing and backpack structures without external support, Monument-FX is built as a showcase centerpiece for display collectors. Product Highlights PG-class 1/60 scale mecha model kit by Nilson Works Total part count: 801 pieces Massive primary wingspan approx. 780mm Secondary wing span approx. 368mm Reinforced waist joint for backpack + wing load stability Cannon extended length approx. 460mm Shield + heat whip length approx. 575mm Base stand included for pose support and display Designed for advanced modelers seeking a high-impact centerpiece build Description Monument-FX emphasizes a grand silhouette with layered mechanical wings and a tall central frame presence. The reinforced waist system allows for stable poses even with the full wing load attached, reducing the need for additional supports. The long cannon, heat whip, shield, and dual beam sabers offer multiple dynamic posing options using the included stand. With 801 parts and PG-scale size, this build is suited to collectors who enjoy detailed assembly and want a visually commanding kit capable of dominating a display shelf or lighted case. Box Contents Monument-FX model runners (801 parts total) Cannon (with effect parts) Beam Sabers × 2 Shield Heat Whip Base Display Stand Instruction Manual Specifications Brand Nilson Works Product Monument-FX Scale PG-class 1/60 Total Parts 801 Main Wingspan Approx. 780mm Secondary Wingspan Approx. 368mm Cannon Length Approx. 460mm Shield & Heat Whip Approx. 575mm Model Type High-detail large-format mecha kit Backorder Notice:This item is currently on backorder and will be shipped once available. Please be aware that cancelling a backorder will incur a 25% restocking fee. For detailed information on our backorder and cancellation policies, please visit our FAQs page.

MG 1/100 Cross Contrast Colors Clear Blue Justice Gundam - Bandai China 2023 Limited Edition Bandai China Estimated Release Date: May 2024 Estimated Delivery: June ~ July 2024 Grade: MG Scale: 1/100 Please read our Preorder FAQ carefully before placing the order.  

GM-GODOMO GM-001 Solaridian - 1/72 Alloy Frame Mecha Model Kit The GM-GODOMO GM-001 Solaridian is a 1/72 scale original mecha model kit built around a pre-assembled alloy metal inner frame. Standing 25cm to the top of the head and reaching 33cm at shoulder height with its spiked armor silhouette, Solaridian is the debut release from GM-GODOMO (also known as GM Model), a Chinese third-party manufacturer focused on high-part-count alloy-hybrid mecha kits. The kit features over 690 parts across 31 runner sets combined with a diecast alloy skeleton, resulting in a fully equipped weight of approximately 986 grams. Its crimson-and-black color scheme, layered armor paneling, and aggressive proportions draw clear visual parallels to Gundam designs like the Sinanju, while maintaining an entirely original mechanical identity. Key Features Pre-Assembled Alloy Inner Frame - Diecast metal skeleton provides structural rigidity and a premium weighted feel; joints are tight out of the box for stable posing under heavy armor loads High Part Count Build - 690+ parts across 31 runners deliver a build session comparable in volume to a PG-class Bandai kit, with layered armor and detailed mechanical internals Shield Burst-Open Mechanism - Both shields feature a spring-loaded deployment structure that recreates dramatic combat expansion; rear shield color separation is particularly detailed Dual Greatsword Combination System - The two-handed greatsword splits into dual wielding swords for multiple combat configurations Yao Guang Floating Cannon System - Four blade-type remote cannons mount on the shoulder armor or deploy independently on transparent support arms from the display base Multi-Linked Articulation - Double-jointed arms, pull-out shoulder joints, linked knee armor movement, and 360-degree waist rotation enable dynamic posing despite the kit's mass Display Base with Storage - Included base features a central storage compartment for spare hand parts and accessories, plus a metal etching nameplate Builder Context The Solaridian is an advanced-level build due to its high part count and the tight tolerances between alloy frame and plastic components - several connection points require significant force during assembly. The kit is snap-fit with pre-colored parts and does not require glue or paint for a complete appearance, though the uniform red armor benefits from custom color variation or shading. Builders familiar with PG-grade Bandai kits or other alloy-frame third-party kits like Motor Nuclear or Infinite Dimension will find the build process familiar in scope, if somewhat rougher in fit precision. Why Build This Kit The GM-GODOMO GM-001 Solaridian occupies a rare position in the third-party mecha market as a 1/72 scale alloy-frame kit with a part count and build volume that rivals Bandai's Perfect Grade line at a fraction of the price. At approximately 986 grams fully equipped and 25cm tall to the head, Solaridian has significant shelf presence and physical weight that most plastic-only kits in this price range cannot match. The alloy skeleton is the kit's strongest engineering element - joints are tight enough to hold the full weapon loadout without sagging, which is a common failure point in heavy third-party kits. Builders should be aware that the tight frame tolerances make assembly physically demanding in places, and some small detail parts (particularly red accent pieces and floating cannon pegs) require care or glue to secure. For builders looking for a high-value, high-volume alloy mecha build outside the Gundam universe, Solaridian delivers more material per dollar than almost any competing kit in the NA market. Box Contents Pre-assembled alloy metal inner frame Armor and mechanical parts (31 runner sets) High-Concentration Magnetic Railgun with removable magazine Dual greatswords (combinable into single weapon) Shields x2 with burst-open deployment mechanism Propellant tanks x2 (usable as rear support stands) Yao Guang floating cannons x4 Transparent support arms x3 (for floating cannon display) Interchangeable fixed-pose hand parts (multiple grip and gesture types) Display base with storage compartment Metal etching nameplate Instruction manual Specifications Brand GM-GODOMO Model Number GM-001 Product Name Solaridian Scale 1/72 Height Approx. 25cm (head height), 33cm (shoulder height with spikes) Weight Approx. 542g (body), 986g (fully equipped) Parts Count 690+ pieces Runners 31 sets Frame Pre-assembled diecast alloy Materials ABS, POM, PVC, diecast alloy EAN 6978414220021 Classification Third-Party Original Mecha Model Kit Backorder Notice:This item is currently on backorder and will be shipped once available. Please be aware that cancelling a backorder will incur a 25% restocking fee. For detailed information on our backorder and cancellation policies, please visit our FAQs page.

The Bandai MG 1/100 MBF-P02Kai Gundam Astray Red Frame Kai (Cross Contrast Colors) is a Bandai China limited edition Master Grade kit from Mobile Suit Gundam SEED VS Astray. This special release reimagines the iconic Red Frame Kai in a dramatic dark color scheme with gold accents using polarized molding color technology, which produces color-shifting effects that change appearance based on viewing angle. As a Master Grade kit, this build is recommended for intermediate to advanced builders who enjoy inner frame construction and detailed assembly. This is part of the Cross Contrast Colors series, designed as a companion piece to the MG 1/100 Gundam Barbatos Cross Contrast Colors variant. Key Features Cross Contrast Colors Scheme: Exclusive dark palette with gold accents replaces the original red-and-white color scheme, using polarized molding color technology for color-shifting visual effects Tactical Arms IIL: Fully transformable backpack weapon system that converts between Sword Form, Flight Form, Arrow Form, Delta Form, V Form, and Work Form Dual Katanas: Includes the Gerbera Straight and Tiger Pierce katanas with plated blade parts and engraved handle signatures, plus sheaths that attach at the hip Beam Torch: Detachable component from the Tactical Arms IIL that can be held in hand or attached to Arrow Form Full Inner Frame: Detailed MG-grade internal skeleton with double-jointed elbows and knees, articulated fingers, and multi-axis shoulder and hip joints Pilot Figures: Two 1/100 scale Lowe Guele figures included - one standing and one seated Limited Edition: Bandai China exclusive regional release with limited production run Included Equipment and Accessories MBF-P02Kai Gundam Astray Red Frame Kai (Cross Contrast Colors) Tactical Arms IIL (multi-form backpack weapon system) Gerbera Straight katana with sheath Tiger Pierce katana with sheath Beam torch Beam saber effect parts 1/100 Lowe Guele figure (standing) 1/100 Lowe Guele figure (seated) Custom Action Base 2 Stickers and dry transfer decals Specifications Brand Bandai Series Mobile Suit Gundam SEED VS Astray Line MG (Master Grade) Scale 1/100 Model Number MBF-P02Kai Mobile Suit Name Gundam Astray Red Frame Kai Variant Cross Contrast Colors (Polarized Molding Color) Pilot Lowe Guele UPC/JAN 4573102672001 Product Type Snap-fit Plastic Model Kit Material PS/ABS Country of Origin Japan Release Date December 2024 Edition Bandai China Limited Edition Backorder Notice:This item is currently on backorder and will be shipped once available. Please be aware that cancelling a backorder will incur a 25% restocking fee. For detailed information on our backorder and cancellation policies, please visit our FAQs page.

Overview The Infinite Dimension IN ERA+ RULING Type 01 Full Armed Battle Machine is a 1/100 scale original mecha model kit featuring a full diecast alloy inner frame and heavy ranged-weapon loadout. Designed as the firepower-focused counterpart to the transformation-capable Genesis, the RULING emphasizes raw ordnance density - carrying six weapons across shoulder-mounted cannons, missile pistols, and forearm-attached kinetic rifles, with hidden missile bays in both the shoulder armor and chest plate. Infinite Dimension (also known as IN ERA+) is a premium Chinese third-party mecha brand recognized for engineering-heavy kits with high part counts, complex internal structures, and alloy frame construction. Key Features Full Diecast Alloy Inner Frame - Pre-assembled alloy skeleton spans the arms, torso, thighs, knees, and feet, concentrating metal in all load-bearing joints for rigid posing under the kit's 564g total weight Heavy Ranged Weapon Arsenal - Six weapons in two mirrored sets: two long-range beam cannons with extendable barrels and deployable heat fins, two triple-missile pistols, and two composite kinetic cannons mounted on the forearms Hidden Missile Bay System - Shoulder armor panels slide forward and flip open to reveal internal missile pods, upper shoulder plates open to expose triple-launch bays, and chest armor flips down to reveal dual missile compartments Weapon Configuration Flexibility - All six weapons connect via adapter pegs, allowing full deployment across both arms and backpack, or consolidated rear storage in a weapon-matrix formation on the backpack 33 Runners with Matte-Finish Molding - Color-separated parts with a matte surface texture across the purple, gray, and orange armor panels, with undergated runners throughout for minimal visible nub marks Removable Transparent Face Visor - Head unit includes a clear face shield that can be removed to reveal an alternate head appearance underneath Display Base Included - Dedicated stand with reversible printed design card and rear-mounted connection point for aerial display poses Builder Context The RULING is an intermediate-to-advanced build with approximately 10 hours of assembly time. The alloy frame comes pre-assembled, so the build focuses on layering armor panels and assembling weapons. No cement or painting is required - the kit is snap-fit with color-separated molding and includes waterslide decals and foil stickers for detail work. Builders familiar with MG-grade Bandai kits will find the complexity and part count comparable, with the added weight and rigidity of the metal skeleton providing a distinctly different handling experience during and after assembly. Why Build This Kit The Infinite Dimension RULING Type 01 is one of the few 1/100 third-party mecha kits that combines a full diecast inner frame with a complete ranged-weapon arsenal, making it a strong choice for builders who want a heavy, display-stable kit with weapon variety rather than melee options. At 22.5 cm tall and 564 grams, the finished build has substantial shelf presence and physical heft that most plastic-frame kits in this scale cannot match - comparable in weight to Bandai's Metal Build finished figures rather than standard MG kits. Builders who have completed the Infinite Dimension Genesis will find the RULING uses the same armor quality and engineering philosophy but trades transformation capability for weapon density and hidden ordnance gimmicks. The RULING is generally regarded as one of the more forgiving IN ERA+ builds - unlike some other kits in the line, part tolerances are well-calibrated and do not typically require sanding for assembly. One known build consideration is that the ball joints connecting the rear beam cannons to the backpack mechanical arms can weaken with repeated repositioning, so builders should plan their display pose before extensive adjustment. Box Contents 33 runners (color-separated injection-molded parts) Pre-assembled diecast alloy inner frame 2x long-range beam cannons 2x triple-missile pistols 2x composite kinetic cannons Weapon adapter/connector pegs 5 pairs of interchangeable hands (fists, open hands, weapon grip, trigger finger, and additional pair) Removable transparent face visor Backpack with mechanical arms and thrusters Display base with reversible design card Waterslide decal sheet Foil sticker sheet Instruction manual Specifications Brand Infinite Dimension / IN ERA+ Product Line IN ERA+ Model RULING Type 01 Full Armed Battle Machine Scale 1/100 Height Approx. 22.5 cm (8.9 in) to head Weight Approx. 564 g Material PS/ABS plastic + diecast alloy frame Runner Count 33 Release Date Q2 2023 Product Type Plastic assembly model kit with diecast frame Backorder Notice:This item is currently on backorder and will be shipped once available. Please be aware that cancelling a backorder will incur a 25% restocking fee. For detailed information on our backorder and cancellation policies, please visit our FAQs page.

Overview The Earnestcore Craft x Howling Star CZ-011B Kishin Colada is a partially pre-painted plastic model kit from the Daiblos Core series, based on the mobile game that is widely popular in China. This collaboration between Chinese hobby manufacturer Earnestcore Craft and game developer Howling Star delivers a knight-type mecha design with over 950 parts, 11 independent LED lighting units, and a dual-mode armor system that switches between ranged and close-combat configurations. The kit is distributed in North America by Kotobukiya. Key Features Dual Combat Modes: The "Oath" Detachable Weapon System allows Colada to switch between Assault Mode (high-mobility ranged firepower) and Melee Mode (close-range weapon configuration) 11 Independent LED Units: Built-in lighting across the mecha frame, with some units pre-assembled (9x CR425 stick batteries and 2x CR1632 button batteries required, sold separately) Over 950 Parts: Highly detailed construction using PS, ABS, PC (clear parts), PA (internal frame), and POM materials Partially Pre-Painted: Select armor panels feature factory-applied paint, plus included gold marking stickers for a display-ready finish with assembly alone Massive Weapon Arsenal: Includes shoulder energy cannons, missile pods, shield light sabers, composite greatswords, autonomous spike blades, guerilla javelins, and a core lance Commanding Display Presence: Model stands approximately 160mm tall at the mecha body, expanding to 350mm height with the full equipment and base, and 500mm in length with effect parts deployed Builder Context The Kishin Colada is an advanced-level build with 40 runners and over 950 parts, suited for experienced modelers comfortable with high part counts and multi-material assembly. The kit uses snap-fit construction with pre-painted elements and pre-assembled LED modules, which simplifies the lighting installation considerably. At 160mm, the main body sits between HG and MG Gundam kits in physical size, but the full Oath Armament System pushes the completed display well beyond anything in that range. Some joints require firm pressure during assembly - sanding or applying vaseline to tight-fitting pegs is recommended. The kit includes assembly assist tools in the box, similar to those found in the Rosado Project Starflower Lily MK3 from the same manufacturer. Why Build This Kit The Earnestcore Craft x Howling Star CZ-011B Kishin Colada stands apart from the current wave of Chinese third-party mecha kits by focusing almost entirely on external armament play value rather than complex inner frame engineering or xianxia-themed design. The "Oath" Armament System functions as a modular vest-like exoskeleton that transforms the 160mm base mecha into a 350mm-tall, 500mm-long display piece with individually openable missile pod doors, linked mechanical claw arms with palm cannons, deployable spike blades on bendable wire cables with burst effect parts, and a 260mm core lance that expands into a full ceremonial weapon array. All 11 LED units come pre-assembled as modules with mechanical activation triggers - opening a cover panel, sliding a claw forward, or pressing a cross-shaped switch - rather than requiring manual wiring, which makes the lighting system accessible to builders who have never worked with electronics in a kit before. The combination of 40 runners, linked armor gimmicks with spring-loaded clearance mechanisms, and multi-mode weapon configurations places this kit's play value closer to high-end Kotobukiya Hexa Gear releases than to typical Chinese mecha kits in its price range. Builders should plan for battery purchases separately: 11 total batteries are required (CR425 stick-type and CR1632 button-type), and a red fuel tank replacement part is included for any lighting positions where batteries are not installed. Box Contents Colada model x1 Oath Detachable Weapon System complete set: Shoulder energy cannons x2 Micro high-explosive missile pods x4 Shield light sabers x2 Type-10 composite greatswords x2 Autonomous spike blades x6 Guerilla javelins x6 Core lance x1 Sword hilt parts x3 sets Hand parts (for modeling) x3 sets Effect parts for spike blades (with cable) x6 Effect parts for light sabers x2 Joint parts x1 Gold marking stickers Dedicated display base x1 Specifications Brand Earnestcore Craft x Howling Star Series Daiblos Core Model CZ-011B Kishin Colada - Cenozoicera Blade A-Type Product Code GN193 Model Height Approx. 160mm Height Fully Equipped (with base) Approx. 350mm (13.78") Length Fully Equipped (with effect parts) Approx. 500mm (19.69") Part Count Over 950 Materials PS, ABS, PC, PA, POM LED Units 11 independent units (batteries sold separately) Pre-Painted Partially pre-painted Distributor Kotobukiya Age Rating 15+ Backorder Notice:This item is currently on backorder and will be shipped once available. Please be aware that cancelling a backorder will incur a 25% restocking fee. For detailed information on our backorder and cancellation policies, please visit our FAQs page.

Aluminum Alloy Acrylic Display Case This Aluminum Alloy Acrylic Display Case is a modular, dust-proof display solution designed for model kits, figures, collectibles, and building block toys. Constructed from aluminum alloy framing with acrylic and PETG transparent panels, the case features magnetic door panels, a mortise-and-tenon joint system for tool-free stacking, and included sealing strips for full dust protection. Key Features Aluminum Alloy Frame: Durable aluminum alloy frame structure with a maximum load-bearing capacity of 700 kg. Available in black, gold, or silver frame colors. Magnetic Door Panels: Transparent panels attach magnetically for easy access with strong adhesion and high light transmission. Mortise-and-Tenon Joint System: Patented universal connector design allows assembly in any direction — top, bottom, left, right, front, and back — without distinguishing orientation. Modular Stackable Design: Cases can be oriented horizontally or vertically and stacked together to form a custom display cabinet. Length and height dimensions are interchangeable while maintaining stackability. Dust Sealing Strips: Included foam sealing strips can be applied to the door panel edges for a fully sealed, dust-proof enclosure. Stacking Clips Included: Dedicated clips are provided to secure stacked cases together for added stability. Semi-Assembled for Easy Setup: Ships in semi-assembled form with simplified installation steps. High-Clarity PETG Panels: Panels are made from high-toughness, high-transparency PETG material for clear, durable viewing. What's Included Aluminum alloy frame components Acrylic and PETG transparent panels Magnetic door panel(s) Foam sealing strips Stacking clips Specifications Frame Material Aluminum Alloy Panel Material Acrylic + PETG Frame Load Capacity 700 kg Door Type Magnetic attachment Joint System Mortise-and-tenon, universal direction Stackable Yes (horizontal and vertical orientation) Dust Protection Included sealing strips for full seal Assembly Semi-assembled, simplified installation Product Type Display case Backorder Notice:This item is currently on backorder and will be shipped once available. Please be aware that cancelling a backorder will incur a 25% restocking fee. For detailed information on our backorder and cancellation policies, please visit our FAQs page.

GM-GODOMO GM-002 Luna-Trace Model Kit The GM-GODOMO GM-002 Luna-Trace is a 1/72 scale original science fiction mecha plastic model kit. Featuring a white-and-purple color scheme with a sharp, minimalist design, Luna-Trace takes a restrained approach compared to the flashier aesthetics common in Chinese third-party mecha kits. GM-GODOMO is an emerging Chinese manufacturer whose debut product, the 1/72 Solaridian, featured a full alloy inner frame - Luna-Trace shifts to an all-plastic construction at a significantly lower price point while retaining the brand's focus on high part count engineering and layered armor design. Key Features Scale and Size: 1/72 scale, approximately 23 cm tall to the head - over 25 cm with backpack equipped. Internal Frame: Full inner frame construction designed for stable posing and structural integrity. Part Count: Over 500 parts delivering layered armor panels and mechanical surface detail. Opening Armor Sections: Multiple armor panels open to reveal internal mechanical structure. Expansion Interface: Rear universal mount designed to support future backpack and weapon expansions. Interchangeable Hands: Five pairs of hands included - open hands, sword grip, gun grip, fist, and signature posing hand. No Paint Required: Color-separated parts deliver a complete appearance straight from the box. Builder Context Luna-Trace is suited for intermediate builders comfortable with high part counts and tight-fitting assemblies. The snap-fit construction requires no cement, and the approximately five-hour build time is comparable to a Bandai MG kit. Fit is reported as tight throughout with minimal need for part modification, making it accessible despite the 500+ part count. Why Build This Kit The GM-GODOMO GM-002 Luna-Trace stands out as one of the highest value-for-parts third-party mecha kits currently available, delivering over 500 parts with a full inner frame at a domestic Chinese price of 79 RMB. For builders looking to try a Chinese third-party kit without committing to a premium price point, Luna-Trace is the lowest-risk entry point in the GM-GODOMO lineup - the Solaridian (GM-001) costs significantly more due to its alloy frame. At 23 cm to the head and over 25 cm with the backpack, the finished build has strong shelf presence for a 1/72 kit, comparable to a standard Bandai MG in height. The minimalist white-and-purple design and balanced weapon loadout give it a protagonist-mecha feel that displays well next to Real Grade or Master Grade Bandai kits. Builders should note that the beam rifle and beam sabers are the only included weapons - this is not an accessory-heavy kit, and the value proposition is in the mechanical detail and armor layering rather than weapon count. Box Contents Luna-Trace main body runners (500+ parts) Internal frame components Armor parts and external panels Beam rifle Beam sabers Five pairs of interchangeable hands (open, sword grip, gun grip, fist, posing) Instruction manual Specifications Brand GM-GODOMO Model Number GM-002 Product Name Luna-Trace Scale 1/72 Height Approx. 23 cm (head height), 25+ cm with backpack Material ABS Part Count 500+ Build Type Snap-fit plastic model kit with full inner frame Color Scheme White and purple (color-separated, no painting required) Country of Origin China Category Third-Party Mecha Model Kit Backorder Notice:This item is currently on backorder and will be shipped once available. Please be aware that cancelling a backorder will incur a 25% restocking fee. For detailed information on our backorder and cancellation policies, please visit our FAQs page.

Bring your 1/72 Einta Industries Sky Defender to life with the KOSMOS LED Set, a premium lighting kit designed to enhance every detail of this iconic model. This expertly crafted set is tailored specifically for the Level-Ultimate edition, delivering an immersive display that truly stands out. Features: Custom-Fitted Design: Engineered to seamlessly integrate with the Sky Defender, ensuring a perfect fit with minimal effort. Dynamic Lighting Effects: Includes multiple lighting modes to replicate engine glows, cockpit illumination, and weapon system highlights. High-Quality Components: Bright yet energy-efficient LEDs for long-lasting performance and realistic effects. Easy Installation: Comes with a step-by-step guide, pre-soldered connections, and adhesive strips for hassle-free setup. Battery Powered: Operates with a compact battery pack (batteries not included), ensuring portability without external wiring. What’s Included: LED modules for cockpit, engines, and weapon systems Control board with multiple lighting modes Adhesive mounting strips Installation guide Backorder Notice:This item is currently on backorder and will be shipped once available. Please be aware that cancelling a backorder will incur a 25% restocking fee. For detailed information on our backorder and cancellation policies, please visit our FAQs page.

Official Nuke Matrix Retailer LA Scale Model is an authorized retailer of Nuke Matrix All Nuke Matrix model kits are 100% genuine and sourced directly from the manufacturer. Nuke Matrix 1/12 Mad Wolf Night Shadow Demon Wolf The Nuke Matrix 1/12 Mad Wolf Night Shadow Demon Wolf is a limited special edition release in the Cyber Forest Fantasy Girls lineup. This premium third party Gundam Gunpla-like mecha model kit features a dramatic Night Shadow color theme and partial iridescent coating on selected armor sections for a striking display finish. Product Highlights Special Edition: Night Shadow Demon Wolf color variant 1/12 scale third party Gundam Gunpla-like mecha model kit Limited-edition release with exclusive color styling Full color separation for clean visual presentation Partial iridescent spray finish on selected armor pieces Medium panel-line complexity suitable for most hobby builders Includes water-slide decals for enhanced detail Special Edition Features Unique Night Shadow Demon Wolf themed armor and color layout Enhanced iridescent surface finish for premium visual effect Exclusive parts and color palette specific to this limited version Complete color separation for a polished build out of the box Box Contents Mad Wolf Night Shadow Demon Wolf model kit parts (1/12 scale) Special-edition armor parts with iridescent effects Fully color-separated part runners Water-slide decal sheet Instruction manual Description This special edition of the Mad Wolf design introduces a bold Night Shadow-themed appearance, emphasizing darker tones, metallic accents, and iridescent highlights on key armor panels. The kit retains the mechanical styling and articulation seen across the Cyber Forest Fantasy Girls series, providing a versatile build suitable for display or dynamic posing. With its polished finish, distinctive color separation, and limited-edition styling, the Mad Wolf Night Shadow Demon Wolf variant offers a standout presence in any mecha model collection. It's designed for builders who enjoy detailed mechanical kits with unique visual themes. Specifications Brand Nuke Matrix Series Cyber Forest Fantasy Girls Edition Special Edition / Limited Edition Theme Night Shadow Demon Wolf Scale 1/12 Color Separation Complete Panel-line Complexity Medium Surface Finish Partial iridescent coating Includes Decals Water-slide decals included

Mecha Core Industry 1/100 Oberon Kai Model Kit The Mecha Core Industry 1/100 Oberon Kai is a third party Gundam Gunpla-like mecha model kit featuring a full assortment of beam weapons, remote armaments, optional gold pre-painted armor parts, and dual display bases. Designed for builders who enjoy mechanical detail and premium equipment loadouts, Oberon delivers a dynamic 1/100-scale building experience. Product Highlights 1/100 scale third party Gundam Gunpla-like mecha model kit Comprehensive beam weapon loadout including blade, rifle, and shield-composite armament Six remote funnels with individual clear supports and a ring-style base Includes optional gold pre-painted armor plate set Two display bases included: main base and funnel ring base Color-separated parts designed for straight build presentation Dedicated hand sets for holding different weapon types Box Contents Main mecha body × 1 Backpack × 1 Beam rifle × 1 Composite gun-shield × 1 Beam greatsword × 1 Close-combat beam sabers × 2 Modular beam blades × 2 Remote funnels × 6 Clear supports for funnels × 6 Ring-style funnel base × 1 Optional gold pre-painted armor plate × 1 Dedicated hand sets × 4 Main display base × 1 Display base support arm × 1 Water-slide decal sheet × 1 Instruction manual Description Oberon arrives with an extensive armament selection built around beam weapon versatility. The composite gun-shield combines both defensive and offensive capability, while the beam greatsword and close-combat sabers allow for dynamic melee posing. The six remote funnels include individual clear stands and a dedicated ring base, enabling floating and formation display arrangements. The kit also provides optional gold pre-painted armor plates for a premium finish straight out of the box. With multiple hand sets, color-separated parts, and two display platforms, Oberon offers strong poseability and custom layout potential for hobbyists and collectors. Specifications Brand Mecha Core Industry Model Oberon Scale 1/100 Armament Beam rifle, composite gun-shield, beam greatsword, beam sabers, modular beam blades Remote Weapons 6 funnels with dedicated stands Optional Parts Gold pre-painted armor plate Accessories Ring funnel base, main base, decals Hands 4 specialized sets Material Plastic model kit Backorder Notice:This item is currently on backorder and will be shipped once available. Please be aware that cancelling a backorder will incur a 25% restocking fee. For detailed information on our backorder and cancellation policies, please visit our FAQs page.

Overview The KOSMOS PGU RX-93 Nu Gundam LED Set (Full Version) is a third-party RGB lighting upgrade designed specifically for the Bandai PG Unleashed 1/60 RX-93 Nu Gundam. This Full Version includes complete LED coverage for the main body and all six fin funnels, making it the most extensive lighting configuration KOSMOS offers for this kit. The system uses flexible printed circuit boards (FPC) to illuminate the head, cockpit, chest vents, backpack thrusters, and all six fin funnels without restricting the model's articulation. KOSMOS is a Chinese aftermarket brand specializing in LED systems for Gunpla, known for app-controlled RGB lighting and model-specific circuit board routing that avoids joint interference. Key Features Full 6-Funnel Coverage: All six fin funnels receive individual dual-zone LED sets, lighting the complete funnel array for full deployment display 4-Channel Lighting Architecture: Three independent RGB channels plus one monochrome channel control head, cockpit, chest heat sink, body nozzles, and fin funnels separately Dual-Zone Fin Funnel Illumination: Each of the six fin funnels contains two independently controlled lighting zones - central frame and edge frame - allowing simultaneous multi-color display within a single funnel Double-Sided Silk-Screened Acrylic Panels: Custom acrylic light guide panels in each fin funnel create a layered, three-dimensional glow effect that recreates the psycho-frame energy field FPC Flexible Circuit Design: All circuit boards are routed to avoid joint areas, preserving the PG Unleashed Nu Gundam's full range of articulation after installation KOSMOS UNIVERSE App + Remote Control: Proprietary smartphone app with wireless remote provides four preset lighting modes, four custom user profiles, and a customizable power-on animation sequence No Modification Required: Plug-and-play installation with no cutting, trimming, or permanent changes to the model Builder Context This LED set is suited for intermediate to advanced builders who are comfortable working with small electronic components and routing wiring through a completed model. Installation does not require soldering, but careful handling of the FPC boards is important - bending beyond the natural flex range can damage circuits. All LED components should be tested before installation, as replacements cannot be offered after the wiring is routed into the kit. Builders familiar with Bandai's official PG Unleashed LED Unit will find the KOSMOS system significantly more capable, with RGB color control, app connectivity, and complete fin funnel coverage that the official unit does not offer. Why Build This Kit The KOSMOS PGU RX-93 Nu Gundam LED Set (Full Version) is the most comprehensive aftermarket lighting option currently available for the PG Unleashed Nu Gundam, covering areas the official Bandai LED Unit does not reach - particularly all six fin funnels and the backpack thrusters. Bandai's official LED Unit illuminates the head, chest, and cockpit in fixed green, requires four AA batteries, and does not support any color customization. The KOSMOS system replaces that limitation with full RGB control across four independent channels, app-based color programming, and dual-zone illumination across all six funnels that no other aftermarket LED set for this kit currently matches. The deployed fin funnel array is the defining visual feature of the PGU Nu Gundam, and the Full Version ensures all six funnels are lit rather than just two. Builders who already own the PG Unleashed Nu Gundam and want to elevate it from a display model to an illuminated centerpiece will find this a meaningful upgrade over the official Bandai option at a comparable price point. Box Contents Main body LED light kit (head, cockpit, chest heat sink, indicators) 6 fin funnel LED light sets with double-sided silk-screened acrylic panels Bonus nozzle light set (backpack thruster illumination) KOSMOS UNIVERSE Bluetooth controller Wireless remote control Exclusive brushed stainless steel metal nameplate Installation manual Specifications Brand KOSMOS Product PGU RX-93 Nu Gundam RGB LED Set (Full Version - 6 Fin Funnels) Compatibility Bandai PG Unleashed 1/60 RX-93 Nu Gundam only Lighting Channels 4 (3 RGB + 1 Monochrome) Circuit Type FPC Flexible Printed Circuit Board Funnel Panels Double-sided silk-screened acrylic Funnel Coverage All 6 fin funnels Control Method KOSMOS UNIVERSE App + Wireless Remote Material PVC, ABS, FPC Estimated Release Late September 2026 Backorder Notice:This item is currently on backorder and will be shipped once available. Please be aware that cancelling a backorder will incur a 25% restocking fee. For detailed information on our backorder and cancellation policies, please visit our FAQs page.

Overview The Special Forces Industry 1/100 Sentinel is a third-party mecha model kit built around a complete prebuilt alloy inner frame. Released in 2024 by Special Forces Industry (特战工业), the same manufacturer behind the Fire Shadow series, the Sentinel represents a sniper-type mecha design with an emphasis on mechanical weight, joint quality, and modular weapon configurations. Special Forces Industry is a Chinese third-party brand known for alloy-integrated mecha kits that prioritize internal frame engineering over external detail density. Key Features Complete Prebuilt Alloy Inner Frame - The entire internal frame is a finished alloy assembly with pre-tuned joint damping, not partial alloy inserts or individual joint upgrades. The 120-part alloy frame ships fully assembled and ready for outer armor attachment. Dual Configuration Build - The kit includes parts for two distinct loadout types, Sniper Type and Heavy Bombardment Type, with two interchangeable head sculpts and double sets of all primary weapons and equipment. One purchase supports two complete display configurations. 702 Total Parts - 120 parts within the prebuilt alloy frame and 582 buildable outer armor and accessory parts in ABS and POM. Pre-Painted Armor Sections - Navy blue, red, antenna, and green visor components are factory pre-sprayed for a near-finished appearance without painting. Modular 24.5 cm Sniper Rifle - The primary weapon can be reconfigured into a compact machine gun by removing the barrel, stock, and optics. Fully Articulated Five-Finger Hands - Individual finger joints require assembly but provide firm weapon grip and natural posing. Multi-Mechanism Articulation - Retractable face mask, extending elbows, three-segment waist bend, linked knee joints, and multi-angle adjustable thrusters. Builder Context The Sentinel is a moderate-difficulty snap-fit kit suited for intermediate to advanced builders. The outer armor is press-fit assembly with no cement required, though builders have noted that some peg tolerances run tighter or looser than typical Bandai kits. The prebuilt alloy frame eliminates the most complex part of the build, so the actual assembly process focuses on attaching outer armor panels and weapons. Builders familiar with MG-grade Bandai kits will find the build format comparable, with the added weight and joint stability of the alloy inner frame. Why Build This Kit The Special Forces Industry 1/100 Sentinel is one of a small number of third-party 1/100 mecha kits that ship with a complete prebuilt alloy inner frame rather than partial alloy joints or plastic-only construction. At 20.7 cm and approximately 702 parts, the finished build has a noticeably heavier, more substantial feel than standard plastic kits at the same scale, including Bandai MG kits. The dual-configuration design, which includes enough parts to build either a Sniper Type or Heavy Bombardment Type loadout with two interchangeable heads, offers display flexibility that most single-configuration kits at this price point do not match. Builders who want alloy frame construction at the 1/100 scale without the price of a high-end diecast figure will find the Sentinel competitive, though peg tolerances across the outer armor can be inconsistent and may require minor fitting adjustments during assembly. The Sentinel is a reasonable entry point into Special Forces Industry kits and third-party alloy-frame mecha in general, particularly for builders who prioritize joint stability and posing weight over surface detail refinement. Box Contents 1x Prebuilt alloy inner frame (120 parts, fully assembled) Outer armor runner sets (582 parts) 2x Interchangeable head sculpts 2x Sniper rifle kit (24.5 cm assembled, modular breakdown to machine gun) 2x Short firearms (side armor stored pistols) 2x Beam sabers 2x UV-reactive pre-painted beam saber effect parts 2x Cannons 2x Shields with articulated mechanical arm mount 2x Robotic sub-arms 2x Leg large thrusters 2x Missile launcher pods 2x Sniper replacement antenna pairs 2x Adaptors/connectors 1x Storage base with compartments 1x Alloy universal support arm stand Assembly instructions Brand Special Forces Industry (特战工业) Product Name Sentinel Model Number TZGY-01 Scale 1/100 Height Approximately 20.7 cm Materials Alloy, POM, ABS Total Parts 702 (120 alloy frame + 582 buildable) Pre-Painted Areas Navy blue, red, antenna, green visor Assembly Type Snap-fit (outer armor); alloy inner frame ships prebuilt Configurations Sniper Type / Heavy Bombardment Type (dual build option) Display Base Included - storage base with alloy universal support arm Backorder Notice:This item is currently on backorder and will be shipped once available. Please be aware that cancelling a backorder will incur a 25% restocking fee. For detailed information on our backorder and cancellation policies, please visit our FAQs page.

Eastern Model A.T.K. Girl Eternal Daylight Ling Wang Xingshi (Awakened Lion) 1/12 Scale Model Kit The Eastern Model EM2024002 A.T.K. Girl Ling Wang Xingshi (Awakened Lion) is a 1/12 scale mecha girl plastic model kit from the Eternal Daylight series. Inspired by traditional Chinese Southern Lion dance culture - specifically the red lion associated with Guan Yu - the design fuses lion dance motifs with mecha girl aesthetics across a dual-body system featuring both a basic figure body and a fully armed mecha body. Eastern Model's A.T.K. Girl line is one of the most established mecha musume (mecha girl) model kit series from a Chinese manufacturer, with over 16 entries spanning mythology, military, and cultural themes. Key Features Dual-Body System: Includes a basic figure body with brown hair and an armed mecha body with white hair. Hair parts are interchangeable between both bodies. LED-Equipped Dance Hammer: The signature weapon features a built-in vibration-activated LED light set. Tapping the hammer head activates the light effect, which auto-shuts off after 12 seconds. Requires 3x LR621 batteries (not included). Four Pre-Printed Face Plates: Tampo-printed expressions include Mischievous, Star, Shouting, and Crying. Four additional blank face plates are included for custom decoration using provided eye decals. Movable Lion Giant Hand: The armed mode lion claw features rotatable eyeballs for expressive, humorous posing. Interchangeable Chest Armor: Red and transparent orange chest armor options allow color customization. Extensive Hand Options: 3 pairs for the basic body and 7 pairs for the armed body, covering a wide range of lion dance poses. Poseable Fabric Scarf: Includes a wire-core fabric scarf for dynamic, customizable positioning. Builder Context The A.T.K. Girl Awakened Lion is a snap-fit plastic model kit that builds without cement or glue. Pre-sprayed metallic silver and gold accents and tampo-printed face plates reduce the need for painting, though builders who want to refine color separation or add weathering will find plenty of surface detail to work with. The build complexity is intermediate - comparable to a Bandai RG kit in terms of part count and articulation engineering, though tolerances on Eastern Model kits can vary more than Bandai. Builders familiar with Kotobukiya Megami Device or Frame Arms Girl kits will find the dual-body format and accessory density familiar. Why Build This Kit The Eastern Model A.T.K. Girl Ling Wang Xingshi (Awakened Lion) is one of the few mecha girl model kits built around a specific cultural theme rather than a generic military or fantasy concept, which gives the finished build a distinctive shelf presence that stands apart from other 1/12 mecha musume kits. The LED-equipped Dance Hammer is a functional accessory rarely seen at this scale and price point - the vibration-activated light effect adds display value without requiring soldering or wiring by the builder. At approximately 16.5 cm, the armed configuration has comparable height and visual density to other recent A.T.K. Girl releases like the Fenrir and Frankenstein, but the lion dance color scheme (red, white, black with metallic gold and silver accents) makes it immediately recognizable in a lineup. Builders should note that the kit requires 3x LR621 batteries for the LED feature, which are not included and are a less common button cell size. For collectors exploring the A.T.K. Girl line for the first time, the Awakened Lion is a strong mid-series entry point - it uses Eastern Model's newer highly articulated body and avoids some of the tight-tolerance issues reported on earlier entries like the Arachne 2.0. Box Contents Basic figure body components Armed mecha body components Dance Hammer with vibrating LED light module Lion giant hand with movable eyeballs Red and transparent orange chest armor parts PVC front and back red skirt parts Poseable fabric scarf with wire core Cat paw accessories (basic body) 3 pairs of hands (basic body) 7 pairs of hands (armed body) 4 pre-printed face plates (Mischievous, Star, Shouting, Crying) 4 blank face plates Eye decals Marking decals Display base Collector's card Instruction manual Specifications Brand Eastern Model (E-Model) Series A.T.K. Girl - Eternal Daylight Model Number EM2024002 Character Ling Wang Xingshi (岭王醒狮 / Awakened Lion) Scale 1/12 Height Approx. 16.5 cm Materials ABS, PVC, Electronic Components Battery Requirement 3x LR621 (not included) EAN 6971835800742 Product Type Plastic assembly model kit Backorder Notice:This item is currently on backorder and will be shipped once available. Please be aware that cancelling a backorder will incur a 25% restocking fee. For detailed information on our backorder and cancellation policies, please visit our FAQs page.

Official Nuke Matrix Retailer LA Scale Model is an authorized retailer of Nuke Matrix All Nuke Matrix model kits are 100% genuine and sourced directly from the manufacturer. Nuke Matrix 1/12 Cyber Forest Fantasy Girls – Mad Wolf: Carolina Rolphe The Nuke Matrix 1/12 Mad Wolf Carolina Rolphe is a third-party mecha-girl model kit blending stylized character design with mechanical build detail. At 1/12 scale and standing approximately 16 cm tall, this kit delivers a striking figure for collectors seeking a compact but detailed build. Product Highlights 1/12 scale mecha-girl model kit from Nuke Matrix’s Cyber Forest Fantasy Girls line Height approx. 16 cm when assembled Constructed from ABS and PVC materials Fully articulated build suitable for dynamic posing and display Color-separated plastic parts for a clean build without painting (optional painting enhances detail) Mecha-girl styling that combines character appeal with mechanical design Box Contents Carolina Rolphe main body parts Accessories and mechanical parts (as per standard Mad Wolf kit configuration) Decal / sticker sheet Instruction manual Description Carolina Rolphe’s Mad Wolf kit captures the feral aesthetic of the “Mad Wolf” archetype while maintaining the flexibility and customization common to third-party mecha-girl model kits. With clean part separation and solid articulation, this kit is suitable both for display and for further customization or painting. Whether built as-is or customized, this kit offers a balance of mecha-girl character styling and mechanical structure, making it a versatile foundation for any collection that includes original-IP or third-party mecha kits. Specifications Brand Nuke Matrix Series Cyber Forest Fantasy Girls Model Mad Wolf: Carolina Rolphe Scale 1/12 Height Approx. 16 cm Material ABS, PVC Kit Type Third-party mecha-girl model kit Backorder Notice:This item is currently on backorder and will be shipped once available. Please be aware that cancelling a backorder will incur a 25% restocking fee. For detailed information on our backorder and cancellation policies, please visit our FAQs page.

Official Nuke Matrix Retailer LA Scale Model is an authorized retailer of Nuke Matrix All Nuke Matrix model kits are 100% genuine and sourced directly from the manufacturer. Nuke Matrix 1/12 Cyber Forest Fantasy Girls - Tanya Charybdis (Storm Interceptor: Royal Enforcer) The Nuke Matrix CF04 Tanya Charybdis "Storm Interceptor: Royal Enforcer" is a 1/12 scale mecha-girl model kit from the Cyber Forest Fantasy Girls series. What sets this kit apart from standard mecha-girl kits is the included S.I.R.E.N. (Storm Interceptor Royal Enforcer) unit - a killer whale-type combat support mechanism that can either operate as a standalone aquatic mecha companion or combine with Tanya's body to form a full mermaid-mode configuration with a long articulated tail. Nuke Matrix is a Chinese manufacturer specializing in original-IP bishoujo mecha model kits, and the Cyber Forest Fantasy Girls line is their flagship series, with Tanya Charybdis being the fourth entry (CF04) following Vivienne, Amelia Hartmann, and Lirly Bell. Key Features S.I.R.E.N. Mecha Companion - Included killer whale-type combat support unit transforms into a mermaid tail when combined with Tanya's body, or displays as a standalone aquatic mecha companion Dual Display Modes - Build and display in standard combat configuration with weapons, or in mermaid mode with the S.I.R.E.N. tail attached Three Painted Face Parts - Pre-painted interchangeable faces for different expressions without requiring any painting Full Weapon Loadout - Trident, arm shield, two speakers, and microphone provide combat and performance display options Cross-Compatible Parts - Select parts are compatible with the previous Cyber Forest Harpy kit (CF03), enabling mix-and-match customization Color-Separated Runners - ABS and PVC construction with clean part separation for a strong out-of-box appearance Builder Context This kit is suited for intermediate builders comfortable with multi-part assembly and small components typical of 1/12 scale figure kits. Construction is snap-fit with no cement required, but the small scale and mecha-girl proportions demand more careful handling than standard mecha kits. The build experience is comparable to Kotobukiya's Megami Device or Frame Arms Girl lines rather than Bandai Gunpla, and builders familiar with those series will find a similar parts-count and complexity level here. Why Build This Kit The Nuke Matrix CF04 Tanya Charybdis is one of the few 1/12 scale mecha-girl kits that includes a full transformable companion unit rather than just swappable accessories, making it a significantly more complex and rewarding build than most kits in the category. The S.I.R.E.N. mermaid tail transformation gives the finished kit two distinct display profiles - a conventional armed mecha-girl and a visually striking aquatic mermaid configuration - which is unusual at any price point in the bishoujo model kit market. At approximately $85, Tanya offers more total plastic and display options than a comparably priced Kotobukiya Megami Device kit, though builders should expect tighter tolerances and smaller parts than Bandai's 30 Minutes Sisters line at this scale. The Cyber Forest Fantasy Girls series uses an original cyberpunk IP rather than licensed characters, so this kit appeals to collectors looking for something outside the Gundam, Frame Arms Girl, or Megami Device ecosystems. Builders new to Nuke Matrix should note that instructions may not include English translation and part fit can vary more than Bandai or Kotobukiya kits, so dry-fitting before final assembly is recommended. Box Contents Tanya Charybdis body parts (snap-fit assembly) S.I.R.E.N. mecha companion / mermaid tail unit Trident Arm shield 2 speakers Microphone 3 pre-painted interchangeable face parts Display stand Decal sheets x 2 Instruction manual Specifications Brand Nuke Matrix Series Cyber Forest Fantasy Girls Character Tanya Charybdis Designation CF04 - Storm Interceptor: Royal Enforcer Scale 1/12 Height (Standing) Approx. 160 mm / 6.3 in Height (Mermaid Mode) Approx. 250 mm / 9.8 in Material ABS, PVC Assembly Snap-fit (no cement required) Facial Options 3 pre-painted face parts Distributor Doyusha SKU NM60052 Backorder Notice:This item is currently on backorder and will be shipped once available. Please be aware that cancelling a backorder will incur a 25% restocking fee. For detailed information on our backorder and cancellation policies, please visit our FAQs page.

KOSMOS LED Lighting System for MGEX 1/100 Strike Freedom Gundam (RGB Upgrade Kit) The KOSMOS LED Lighting System for MGEX 1/100 Strike Freedom is a third-party RGB lighting upgrade engineered to illuminate the wings, internal frame, and head unit of the MGEX Strike Freedom. Featuring multi-zone light control, redesigned transparent wing parts for better diffusion, and an app-capable controller, this kit transforms Strike Freedom into a premium display centerpiece. Product Highlights Designed specifically for Bandai MGEX 1/100 Strike Freedom Gundam RGB multi-zone lighting system — wings and head illumination Wireless controller with mobile app support for color and animation effects Replacement transparent wing effect parts included for improved light diffusion No soldering required — plug-and-wire installation system Ideal for “Full Burst Mode” or “Wings of Light” style display setups Description The KOSMOS LED Lighting System elevates the MGEX Strike Freedom beyond standard display presentation. Light channels run through the wings and head unit, allowing builders to create dynamic visual effects ranging from static illumination to flowing gradient animations. The included replacement effect parts enhance light distribution, producing a bright and clean glowing wing appearance that is ideal for shelf display or photography. This system is designed for intermediate builders familiar with LED routing inside Gunpla frames. While no soldering is needed, careful handling during assembly is recommended to prevent pinching wires between inner and outer armor layers. Installation Notes MGEX Strike Freedom Gundam model kit not included Wing effect parts included with this LED upgrade are used in place of stock clear parts Minor trimming or adjustment may be required for ideal cable routing Always test lights before final assembly Box Contents RGB LED harness for wings and head Transparent wing effect replacement parts LED control module Power supply cable (USB or battery-powered depending on batch) Wireless remote and/or app pairing instructions Mounting aids, connectors, installation guide Specifications Brand KOSMOS Product LED Lighting System for MGEX Strike Freedom Compatibility Bandai MGEX 1/100 Strike Freedom Gundam Lighting Type RGB multi-zone LED Control Wireless module with app support Installation No soldering — internal wiring route required Backorder Notice:This item is currently on backorder and will be shipped once available. Please be aware that cancelling a backorder will incur a 25% restocking fee. For detailed information on our backorder and cancellation policies, please visit our FAQs page.