HeMoXian

Hemoxian 1/12 Rusted Brier - Rhande Koskinen The Hemoxian 1/12 Rhande Koskinen is a fully transformable assembly model kit from the Rusted Brier (铁锈蔷薇) series - a new original IP line from Hemoxian set in a dieselpunk world where young women are converted into hybrid combat units known as THMs (Tactical Humanoid Machines). Rhande Koskinen and her transformable mecha vehicle "Feng Ren" can be configured across five distinct display modes: base Mecha Girl form, Armed Form with external leg and back armor, Humanoid Mecha Form, Semi-Vehicle Mecha Form, and a full propeller-driven Vehicle Form inspired by WWII-era fighter aircraft. Hemoxian is the manufacturer behind the Over Zero series and the Reverberation of Medta Jiulian kit, known for engineering functional mechanical gimmicks into snap-fit plastic model kits. Key Features Five-Mode Transformation System - Reconfigure between Mecha Girl, Armed Form, Humanoid Mecha, Semi-Vehicle Mecha, and full Vehicle Form using shared structural components between the figure and mecha vehicle. Dual Build - Kit includes both the Rhande Koskinen figure (approx. 13.5 cm) and her dedicated mecha vehicle "Feng Ren," which assembles into a complete propeller-driven aircraft frame at approximately 19.5 cm in mecha configuration. Dieselpunk Military Aesthetic - Olive drab armor plating, yellow engine nacelles, red-tipped propeller blades, and riveted panel detail draw from WWII-era fighter aircraft and industrial military design language. Pre-Painted Components - Partially pre-painted parts including skin tone, blue hair, brown flight suit, and military green armor reduce the need for painting out of the box. Connective Backpack System - Back-mounted connective module allows the mecha armor to attach directly to the figure body, enabling the armed and semi-vehicle transitional forms. Weapon Loadout - Includes wing-mounted gun pods, blade weapons integrated into the mecha arms, and additional armaments visible across the vehicle and humanoid mecha configurations. Display Stand Included - Heavy-duty display stand supports both ground and flight poses across all five configuration modes. Builder Context Rhande Koskinen is an intermediate-level snap-fit kit that does not require cement or painting for a display-ready build, though nippers and basic cleanup tools are recommended. The transformation between five modes involves physical part-swapping rather than a single continuous transformation mechanism - builders should expect to disassemble and reconfigure components to switch between forms. Builders familiar with Hemoxian's previous 1/12 Jiulian kit or Kotobukiya Frame Arms Girl kits will find the mecha girl construction familiar, while the vehicle component adds a layer of engineering complexity comparable to a Bandai HG kit with a dedicated support craft. Why Build This Kit The Hemoxian 1/12 Rhande Koskinen is the first release in the Rusted Brier series and introduces a transformation system that is uncommon in the mecha girl model kit category - most competing products from Kotobukiya, Bandai 30MS, or other Chinese manufacturers offer armor-up configurations but not a full vehicle mode with propeller-driven aircraft aesthetics. At approximately 19.5 cm in mecha form, the combined figure-plus-vehicle assembly has display presence comparable to a Bandai MG kit, while the ¥218 RMB price point positions it below most 1/10 scale Hemoxian Over Zero releases. The dieselpunk military theme sets it apart visually from the cyberpunk direction of the Over Zero line and the horror aesthetic of Jiulian, making it appealing to builders who want a mecha girl kit with a more grounded, historical-military visual identity. Builders should note that this is a brand-new IP with no prior gray prototype or builder reviews available at time of preorder - first-batch buyers are committing based on Hemoxian's track record with Jiulian and the Over Zero series rather than community feedback on this specific product. Box Contents Rhande Koskinen figure components (partially pre-painted) "Feng Ren" transformable mecha vehicle components External leg armor parts (front and back) Connective backpack module Helmet Wing-mounted weapon pods Blade weapons Interchangeable hand parts Display stand with support arm Specifications Brand Hemoxian (和模线) Series Rusted Brier (铁锈蔷薇) Character Rhande Koskinen (兰德·科茜基妮) Scale 1/12 Type Assembly Posable Model Kit Materials ABS, POM, PVC Height (Base Body) Approx. 13.5 cm Height (Mecha Form) Approx. 19.5 cm Release Date Estimated Q3 2026 Preorder Notice: This item is currently on preorder and will be shipped once available. Please be aware that cancelling a preorder will incur a 25% restocking fee. For detailed information on our preorder and cancellation policies, please visit our FAQs page.

Rosado Project RS-03 Starflower Lily MK3 The Rosado Project RS-03 Starflower Lily MK3 is a partially pre-painted 1/10 scale plastic model kit and the third installment in the original mecha musume series rosado Project. Produced as a collaboration between Hemoxian (Kakusei Jizou) and Earnestcore Craft (Wamosen) and distributed by Kotobukiya, Starflower Lily MK3 features a lily-themed modular armor system, a dual-form body with magnetic part-swapping, movable eyes on all three face parts, and extensive pre-painted components including plated flame effects and champagne-gold detail parts. Key Features Lily Petal Armor System - Armor-mounted modular system configurable between three modes: Skirt Armor Mode, Composite Shield Mode, and Particle Cannon Mode. All three combine into the Lily Cannon for a massive combined weapon display. Dual Body Configuration - Switch between Human Mimicry and Battle Form with three interchangeable face parts (Human, Battle, and Overload Mode) plus a blank face. Includes both mechanical and humanoid chest parts for further customization. Magnetic Part-Swapping - Built-in magnets on the head connection allow tool-free face swapping. Head lifts straight off for instant mode changes. Movable Eyes - All three face parts feature adjustable eye mechanisms with an included adjustment rod, a rare feature in assembly-type mecha musume kits. Plated Flame Effect Parts - The Overload Mode head includes color-shifting plated flame effect parts that display different colors under varying light angles. Dual Color Transparent Parts - Orange and blue transparent part sets included for full-body color customization across the figure and weapons. Heavy Duty Display Stand - Black gloss base with press-release angle lock, aluminum support rod, and screw-fixed rotating joint at the top. Stand connection point is hidden beneath the lily stamen detail on the skirt armor. Builder Context The Starflower Lily MK3 is a snap-fit kit with many pre-painted components, making it accessible to intermediate builders comfortable with runner-based assembly and water slide decal application. The build complexity is comparable to Bandai's HG or 30MS mecha musume kits, though the small high-heel foot design and slender limb proportions require more careful handling during assembly than typical mecha kits. No cement or painting is required, but panel lining and topcoating will improve the finished appearance. Why Build This Kit The Rosado Project RS-03 Starflower Lily MK3 stands out in the mecha musume kit market for its three-mode Lily Petal Armor system, which allows the skirt armor, shield, and cannon to combine into a single oversized Lily Cannon weapon - a display option that no competing mecha girl kit in this price range currently offers. The movable eye mechanism across all three face parts is uncommon in assembly-type kits and adds posing expressiveness that typically requires aftermarket eye decals on products like Kotobukiya's Megami Device or Frame Arms Girl lines. At approximately 20.5 cm tall with weapons reaching up to 40 cm in length, the Starflower Lily MK3 has significant shelf presence for a 1/10 scale kit, especially in the full Lily Cannon configuration. The built-in magnetic head-swap system and pre-painted detail parts mean builders get display-ready results without painting, which positions this kit as a strong option for anyone who enjoys Bandai 30MS kits but wants a more detailed, larger-scale mecha musume build with original IP. Box Contents Main figure parts (31 runners including 2 metal-coated and 1 holographic-coated) Interchangeable face parts x3 (Human Mimicry, Battle Form, Overload Mode) Blank face x1 Movable eye parts x3 pairs with adjustment rod Interchangeable chest parts x2 (mechanical and humanoid) Standard hand parts x3 pairs (relaxed, open palm, claw) Weapon-specific hand parts x7 pairs (fist, straight grip, angled grip, weapon-integrated grips) Close-Combat Spear (Starflower Spear) with dual-length aluminum rod options (12 cm / 15 cm) Pursuit Cannon (Starflower Cannon) with deployable sniper bipod Petal Armor Mount Module Composite Shield (Lily Shield) Lily Cannon combination parts Orange transparent parts set Blue transparent parts set (replacement) Champagne-gold pre-painted petal inner parts with orange replacement set Plated flame effect parts (for Overload Mode) Energy release foot stand parts (blue and orange) Gold foil water slide decal sheet Heavy Duty Display Stand with aluminum rod Weapon Rack Church-themed photo backdrop card Lenticular holographic character card Instruction manual Specifications Series rosado Project Product Number RS-03 Scale 1/10 Height Approx. 20 cm (to head) / 22 cm (to armor peak) Materials ABS, PVC (phthalate-free) Manufacturer Hemoxian (Kakusei Jizou) x Earnestcore Craft (Wamosen) Distributor Kotobukiya Sculptor ZKI Product Type Partially pre-painted plastic assembly model kit Recommended Age 15+ Preorder Notice:This item is currently on preorder and will be shipped once available. Please be aware that cancelling a preorder will incur a 25% restocking fee. For detailed information on our preorder and cancellation policies, please visit our FAQs page.

Hemoxian 1/10 Over Zero UTX-6030 Tastier Model Kit The Hemoxian 1/10 Over Zero UTX-6030 Tastier is a third-party mecha model kit depicting the military cyborg "Tastier" from the original Over Zero universe. Unlike traditional mecha kits, Tastier is designed as a biomechanical power-armor unit with TPE soft-rubber musculature that deforms naturally during posing - simulating hydraulic pistons, spinal flexion, and muscle contraction across the arms, legs, and torso. Hemoxian (also known as NonZero Studio) is a Chinese manufacturer known for integrating functional mechanical gimmicks into snap-fit model kits, and Tastier is the flagship product of their Over Zero original IP line. Key Features TPE Biomimetic Muscle System: Red soft-rubber components across the neck, arms, spine, and legs compress and deform when joints are articulated, simulating functional power cables and musculature. Hydraulic Piston Linkage: Four hydraulic rods in the waist produce mechanical linkage movement during torso rotation, lateral bending, and forward/backward lean. Ankle pistons extend and retract during foot articulation. LED Eye Unit: Built-in LED module with rear-mounted switch illuminates eight interchangeable compound-eye sticker designs. Requires one CR927 3V button cell battery. Modular Mechanical Dog: General-purpose support mecha that functions as a standalone articulated unit, separates into an electromagnetic cannon (hand weapon) and a jet-propulsion backpack that mounts to Tastier's back. Composite Maintenance Base: Display stand with integrated weapon storage featuring dedicated slots for each accessory, diecast flexible snake-bone support arm, and a rotatable weapon-rack display mode. First-Batch Bonus Cloak: Cloth cloak with embedded internal wire for custom shaping and tattered-edge detailing at the hem. Partially Pre-Painted: Silver armor accents and select details are pre-painted. Color-separated plastic molding achieves accurate color layout without painting. Builder Context Tastier is an intermediate-level snap-fit kit that requires no cement or painting for a complete build, though nippers and basic cleanup tools are recommended. Assembly fitment runs slightly tight, and some force is needed during construction. The TPE rubber components and locking clip joints give the finished model a tactile, toy-like solidity that is unusual for a model kit - experienced builders often compare the handling feel to a finished action figure rather than a typical plastic kit. Builders familiar with MG-grade Bandai kits will find the articulation engineering comparable, with the biomimetic muscle system offering a build experience unlike anything in the Gundam ecosystem. Why Build This Kit The Hemoxian UTX-6030 Tastier is the recommended entry point into the Over Zero series due to its complete accessory package - the full set includes the main figure, mechanical dog, and maintenance base, making it the most value-dense offering in Hemoxian's current lineup. The TPE biomimetic muscle system sets Tastier apart from every other third-party mecha kit on the market; no Bandai kit at any grade currently replicates the functional piston-and-muscle deformation gimmick that Tastier uses across its entire body. At 19.5 cm with the mechanical dog and maintenance base included, Tastier offers more display volume and play options than most kits at double its price point. Builders who are comfortable with RG or MG Bandai kits but want something outside the Gundam universe will find Tastier's build complexity and joint engineering familiar, while the power-armor aesthetic and weapon-swapping modularity provide a distinctly different shelf presence. The one known build issue across reviews is that small gray leg-guard attachments can be difficult to fit as shown in the manual - test-fitting before committing is recommended. Box Contents Tastier main figure components (partially pre-painted) General-purpose mechanical dog (partially pre-painted) Composite maintenance base Diecast flexible snake-bone support arm Rifles x2 Pistols x2 (with functioning slide mechanism) Daggers x4 Light blade effect parts (forearm-mounted) Weapon firing effect parts (pistol, rifle, and electromagnetic cannon) Blade swing particle effect part LED eye unit (requires CR927 3V battery) Metal etching sheets x2 Water-slide decal sheets x3 Metal hose First-batch bonus cloth cloak (wire-embedded) Cityscape photo backdrop card Instruction manual Brand Hemoxian (NonZero Studio) Series Over Zero Model UTX-6030 Tastier Scale 1/10 Height (Tastier) Approx. 19.5 cm (7.67 in) Height (Mechanical Dog) Approx. 8.0 cm Height (Maintenance Base) Approx. 3.5 cm Materials ABS, PS, TPE, stainless steel, steel, cotton, PU Assembly Snap-fit (no cement required) Battery CR927 3V button cell (check packaging for inclusion) Release Year 2024

HeMoXian 1/10 Over Zero Batman Arkham Knight Model Kit The HeMoXian 1/10 Over Zero Batman Arkham Knight is an officially licensed plastic model kit based on Batman: Arkham Knight. This product is produced under authorization from DC and Warner Bros., and manufactured by Yuanye Culture, with design and development participation from Guangdong Hemoxian Culture Co., Ltd. The kit recreates the Arkham Knight’s armored design, weapon systems, and transformation mechanics as seen in the game. Key Features Official DC License: Licensed product based on Batman: Arkham Knight, approved by DC, Warner Bros., and WB Shield. 1/10 Scale Assembly Model: Large-scale plastic model kit with articulated joints and mechanical structure. Dual Character Configuration: Includes dedicated conversion parts to switch between Arkham Knight and Red Hood (Jason Todd), including two Red Hood helmet styles. LED Head Lighting System: Head unit supports interchangeable lighting, with blue LED set for Arkham Knight and red LED set for Red Hood, plus battle-damaged and alternate face armor. Combinable Weapon System: Two signature pistols can transform independently or combine into a full sniper rifle configuration. Game-Accurate Arsenal: Includes grappling gun, smoke grenades, knives, daggers, and melee weapons used by both Arkham Knight and Red Hood. Soft Rubber Joint Technology: Uses HeMoXian proprietary soft rubber components to simulate muscle deformation and improve dynamic posing. Modular External Backpack: Includes an original backpack compatible with the Over Zero modular system, allowing cross-series equipment combinations. First Batch Bonus Item Limited Bonus: One randomly included bonus garment per kit Hooded vest or leather jacket (randomly packed) Limited Production Notice This product is manufactured and released as a one-time production run Due to licensing term limitations, this item will be permanently discontinued after the initial release No reprints or reissues will be produced Included Parts and Accessories Arkham Knight main body components Red Hood (Jason Todd) conversion parts Multiple interchangeable head and mask parts Blue and red LED lighting units Two transformable pistols Sniper rifle combined configuration parts Grappling gun Smoke grenades Knives, daggers, and melee weapons Modular external backpack system Interchangeable hand parts Decal and marking sheets Instruction manual Specifications Brand HeMoXian Series Over Zero Scale 1/10 Product Type Plastic assembly model kit License Batman: Arkham Knight © DC, WB, WB Shield Lighting LED head lighting (red and blue) Material Plastic with soft rubber components Production One-time licensed production Preorder Notice:This item is currently on preorder and will be shipped once available. Please be aware that cancelling a preorder will incur a 25% restocking fee. For detailed information on our preorder and cancellation policies, please visit our FAQs page.

Big Firebird x HeMoXian Kelly Janet Model Kit The Big Firebird x HeMoXian Kelly Janet Model Kit is a fully articulated mecha girl plastic model from the Full-Time Jijia series. Designed around a human–machine hybrid combat concept, Kelly Janet features both a heavily equipped aerial combat form and a lighter close-combat configuration, offering high poseability and dynamic display options. Key Features Dual Configuration Design: Supports both Human-Computer Hybrid Form and Light Form, allowing builders to display Kelly Janet in different combat roles. Highly Articulated Build: Engineered with multi-axis joints across the shoulders, hips, and wing units to support airborne and action poses. Weapon Loadout: Includes a pulse sniper rifle for long-range combat, dual electromagnetic rifles, and a pulse light saber for close engagements. Flight System: Equipped with the SKY-001 dedicated flight unit and mechanical arm attachments for aerial combat display. Expression Customization: Comes with four interchangeable face plates, including smile, angry, crying, and sleepy expressions. Accessories & Equipment Pulse Sniper Rifle Electromagnetic Rifles x2 Pulse Light Saber SKY-001 Flight Unit Mechanical Arms x2 Dedicated Display Base with Support Arm Interchangeable Hand Parts (4 pairs) Interchangeable Face Plates (4 types) Specifications Brand Big Firebird x HeMoXian Series Full-Time Jijia Character Name Kelly Janet (凯莉·珍妮特) Model Type Mecha Girl Assembly Model Kit Height Approx. 18 cm (Full Equipment), 11 cm (Light Form) Material ABS, PS

Hemoxian 1/10 Over Zero – Lone Shadow Ninja Single Unit Model Kit The Hemoxian 1/10 Over Zero – Lone Shadow Ninja (Single Unit) model kit is a detailed 1/10-scale third-party mecha figure offering a dynamic action presence suited for collectors and builders interested in original IP mecha designs. This single-unit version includes the core build parts without the larger accessory kit, making it a focused entry for Hemoxian’s Over Zero lineup. Key Features 1/10 scale original mecha model kit by Hemoxian Unique “Lone Shadow Ninja” design with stylized silhouette and ninja-inspired aesthetics Plastic construction with articulated joints for dynamic posing Model height approx. 19 cm when fully assembled Includes essential build parts for the Lone Shadow unit Compatible with additional Over Zero accessories and expansions (sold separately) Instructions included (language may vary by batch) Description The Lone Shadow Ninja blends sleek mechanical angles with a combat-ready posture that emphasizes agility and form. With an articulated build, this kit lets builders pose the model in dynamic stances and expressions. As a single-unit version of the Lone Shadow design, it provides the core model for customization or standalone presentation. Detailed outer armor and ninja-themed silhouette give this kit a distinctive visual identity within the Hemoxian Over Zero series. The parts are molded for clean assembly, and though decal and finish options may vary by batch, the base kit forms a solid foundation for further enhancement. Box Contents Main unit runners for Lone Shadow Ninja Articulated joint components Essential armor and detail parts Decal sheet Instruction manual Specifications Brand Hemoxian Model NBD-009 Lone Shadow Ninja (Single Unit) Scale 1/10 Height Approx. 19 cm (7.48″) Material ABS, PS, TPE Articulation Poseable joints Kit Type Third-party mecha model kit

Hemoxian 1/10 Over Zero Red Death Version Model Kit The Hemoxian 1/10 Over Zero Red Death Version is a third party Gundam Gunpla-like mecha model kit featuring the character known as the “Red Death.” Equipped with a military-grade UTX-6020 cybernetic body, this version presents a powerful combination of mechanical styling, weapon variety, and premium accessories. As part of the Over Zero series, the kit offers both character narrative appeal and detailed mechanical construction. Product Highlights 1/10 scale third party mecha model kit Red Death height: approximately 19.5 cm Includes mechanical dog unit (approx. 8 cm) Includes composite maintenance base (approx. 3.5 cm) Constructed from ABS, PS, and TPE for flexibility and durability Partial pre-painted components for enhanced display quality Includes multiple weapons: rifles, pistols, and knives Includes metal parts, light-up eye component, and water-slide decals Exclusive event-limited red armor replacement plates included Bonus cloak and weapon effect parts included Description The Red Death is depicted as Adam Henrik, a mercenary enhanced with the UTX-6020 military cybernetic frame. Initially a member of the Tastier Alpha Squad, his memory was altered after capture, leading him to become the leader of the enemy unit known as the Death Hurricane. His half-red body coloration gives him the title “Red Death.” This model kit recreates the Red Death with detailed mechanical textures, varied weapons, and premium accessories. The included mechanical dog features partial paint application, while the compact maintenance base adds display versatility. With metal hoses, etched parts, glowing eyes, and optional red armor plates, the kit offers an extensive and customizable build experience. Box Contents Red Death main body (partial pre-paint) Rifles × 2 Pistols × 2 Knives × 2 Mechanical dog unit (partial pre-paint) × 1 Composite maintenance base × 1 Metal hose × 1 Light-up eye component × 1 Metal etched parts × 2 Water-slide decal sheets × 3 Special event-limited red armor replacement plates × 4 Weapon effect parts (two runners) Red Death cloak × 1 Instruction manual Specifications Brand Hemoxian Series Over Zero Version Red Death Scale 1/10 Figure Height Approx. 19.5 cm Mechanical Dog Height Approx. 8 cm Maintenance Base Height Approx. 3.5 cm Materials ABS, PS, TPE Special Inclusions Event red armor plates, weapon effect runners, cloak

HeMoXian Over-Zero Series Boxer BAKI 1/10 Model Kit The HeMoXian Over-Zero Series Boxer BAKI is an original mecha plastic model kit from HeMoXian’s Over-Zero lineup. This is a Third Party Gundam Gunpla Like Mecha Model Kit and is not affiliated with Bandai or the Gundam franchise. Built in 1/10 scale and listed at approximately 21 cm tall, this kit is designed as a large-format build with a boxing-inspired loadout and multiple display accessories. Key Features Scale and Size: 1/10 scale, approximately 21 cm tall when assembled. Materials: Listed as ABS, PS, and TPE. Display Options: Includes a base for stable posing and display. Customization: Includes alternate face plates, interchangeable hands, and effect pieces for varied presentation. Loadout Variety: Includes multiple weapon and equipment components shown in standard retailer box contents. Box Contents Pieces to build Boxer BAKI 2 alternate face plates 3 pairs of interchangeable hands Pair of electric drills Champion gold belt Pair of Rock Crack gauntlets Blade: Cardinal T-4 Garba-IV gun Training robot 2 Butter Knife MK3 units Boxer’s uniform parts 4 hair tube parts Effect pieces Color-changing panels Water decal sheets Base Instructions Specifications Brand HeMoXian Series Over-Zero Model Boxer BAKI Scale 1/10 Height Approx. 21 cm Materials ABS, PS, TPE Markings Water decal sheets included Category Third Party Gundam Gunpla Like Mecha Model Kit Preorder Notice: This item is currently on preorder and will be shipped once available. Please be aware that cancelling a preorder will incur a 25% restocking fee. For detailed information on our preorder and cancellation policies, please visit our FAQs page.

IMPORTANT MANUFACTURE UPDATE Additional reprints are available for Thor, but the manufacture is no longer making Thor with the preorder bonus items (the cape). Preorder Details Please read our Preorder FAQ carefully before placing the order. Product Description He Mo Xian (和模线) NZS-05-3 Legend of Thor, God of Thunder. Product Features Material: Plastics (ABS/POM/PVC etc.) Height: 22.5 cm Item Type: Model Kits Scale: 1/100 Box Contents 1 x main figure 2 x hand cannon 1 x backpack 1 x hammer 1 x eye-lighting part 1 x water slide decal