Tools

Model: MS049 Size: 130mm Grit: #400/#600/#800/#1200 Double-sided file with two different textures.  Front side: Grain Texture Back side: Single Twill Texture High heat treatment, wear resistance, and extra hardness. The file width of 2mm makes it perfect to reach hard-to-reach areas for precision filing. * not intended to be used on metal materials    

Model: T09A17 Color: Red/Black/Blue/Gray 304 stainless steel blade collet, Brass chrome plated handle, All-aluminum lightweight body, low center gravity design for better handling Package Contains: Anti-rolling protection cap x 1 Galaxy Model Tools Modeler's Knife x 1 (random color) Bright & narrow edge replacement blades x 20

Model: MS060 Material: Tungsten Steel Tungsten steel is used for manufacturing micro-drill bits, high-durability self-sharpening rotary cutting blades, and rocket engine nozzles, among many other applications. To compare, steel has three times less rigidity than tungsten. This rigidity makes tungsten stronger than both steel and titanium.   Set contains: Hand Drill x 1 Drill bit 0.8mm x 1 Drill bit 1.0mm x 1 Drill bit 1.5mm x 1 Drill bit 2.0mm x 1 Drill bit 2.5mm x 1  

Model: MSF-13 Size: 90x13x3mm Material: Tempered Glass Excellent handling and buffing abilities. The buffing results are equivalent to polishing with #10,000~#12,000 grit sandpapers or buffing with a polishing compound. Made with tempered glass. Can be washed with water with no concern of corrosion. * comes with a plastic protection box.  * do not drop this item as it may shatter. always put the item back into its protection box after use * not intended for polishing metal materials

Shorter for better handling. Extra durable Each stick is labeled with its grit. Each grit is also laced with a different color in the middle of the stick. Size: 88mm x 20mm x 4mm This set comes with 4 sanding sticks: #400 x 1 - Red #600 x 1 - Blue #800 x 1 - Purple #1000 x 1 - White

This brings out a realistic felling better than a painted top coat. Mr.TOP COAT can be applied over slide marks(decals) without blemishes. A good way to eliminate differences between the paints and the slide marks is making the model surface smoother. important shipping infoCan only ship via ground transport. No overseas shipping, no express shipping.

Micro Sol setting solution is for the most difficult irregular surfaces to be found on models. It completely softens the Microscale Decal, allowing it to drape down onto the surface of the model, conforming perfectly to surface irregularities without distortion. The most amazing results in seemingly impossible places are possible because Micro Sol actually makes the decal part of the painted surface. For that reason, you should coat Micro Sol on for only a few seconds and then leave it alone. It does the work. Do not touch until the decal has dried, as the decal is very soft at this stage and could be easily damaged. For the best results, first, apply Micro Sol to prepare the surface and enhance the adhesive. Make sure the surface is free of particles that could get under the decal's film and cause a blemish. Then, when everything is dry enough that the decal will not move easily, apply Micro Sol with a small flat brush. Apply with as few strokes as possible so as not to disturb the decal. Then allow the decal to dry without disturbing it. One application is enough in most cases but, if necessary, a second application of Micro Sol can be helpful.

Micro Set is a very versatile decal setting solution that does several things to Microscale Decals to improve the application. Micro Set should be applied to the surface of the model where you will be sliding the decal off the paper backing. Micro Set prepares the surface with special wetting agents that cut the oils into new paint and convert the adhesive on the back of the decal to a stronger and longer-lasting one. In addition, Micro Set slightly softens the decal film to make it more flexible so that it will conform better to the model's surface. Better adhesion of the decal to the model prevents tiny air bubbles from forming and results in an invisible carrier film for the so-called "painted-on look." To apply Micro Set: Use a soft flat artist's brush and apply Micro Set where you are going to apply the decal. Then slide the decal off the backing paper using a small pointed tip synthetic bristle brush to carefully position the decal in its proper position. Blot the decal carefully with a tissue or paper toweling, being careful not to disturb its position. Allow the decal to dry overnight. It will then be ready for a protective coat of Micro Coat Flat, Satin, or Gloss.

The “Semi-Gloss type” has been added to the widely popular Aqueous color “Premium” series. The thickness of the resin and the transparency have been further developed, and the coating strength has been improved, so the surface will not be damaged by scratches easily. Mr.Top Coat can be applied over slide marks(decals) without blemishes. A good way to eliminate differences between the paints and the slide marks is to make the model surface smoother.・Can be applied over Mr.Color, water-based hobby colors, and enamel paints.・Can be used for painting that begins over slide marks.・Using Mr.Color or Mr.Super Clear over Mr.Top Coat will cause it to dissolve. important shipping infoCan only ship via ground transport. No overseas shipping, no express shipping.

Mr. Colour Leveling Thinner is an all-around outstanding thinner, for use with lacquer-based paints that contain a drying retarder. This makes the thinned paint slower drying meaning it has more time to spread and level to a smooth finish. This helps you create a much smoother surface and a higher gloss finish.

Mr.Mark Softer is a softening agent designed to be used with decals (slide marks). It enables decals to conform to rough and curved surfaces.How To Use Mr.Mark SofterFirst, apply a small drop of Mr.Mark Softer to the area where the decal will go using the brush attached to the bottle cap.Apply the decal over this area. Apply gentle pressure to the decal with a soft cloth, removing any excess liquid and ensuring that the decal is down fast.The decal will stick perfectly, even on uneven or curved surfaces.If air bubbles do get in between the decal and the model surface, allow the decal to dry, and then carefully prick the decal with a needle and insert Mr.Mark Softer through the resulting hole. The air will escape, and the decal will then stick down conforming to the surface of the plastic part.

Mr. Mark Setter is an adhesive component, which gives decals greater adhesion to plastic parts. It is much easier to affix decals to plastic model part where the parts either have a rough or irregular surface. First, the area to which the decal will be affixed is painted and then the decal is applied. After any air bubbles are removed by pressing on the decal with a cotton swab, a coating of Mr.Mark Setter is applied and allowed to dry. Because the decal now has a greater degree of adhesion, adhesive silvering (the floating and shiny quality of the clear parts of decals) will be greatly reduced or eliminated, and decals can be firmly affixed to uneven surfaces. It is perfect even for poorly made decals. Decals will have greater adhesion if the painted surface is prepared with a gloss finish.

Mr.Masking Sol is a special liquid gum that's different than other types of masking solutions. It dries smooth and is easy to peel after the painting is finished.  This new masking sol prevents paint absorption when applying masking solution over a large area and when airbrushing.

The Tamiya Extra-Thin Quick-Setting Cement is a great time saver for the hobby enthusiast. This thin cement dries around 4 times faster than the Tamiya Extra-Thin Cement and is perfect for small parts. Being a thin formula it is able to flow into small seams or cracks and will set very quickly. Modeling Tip:It is best to use the Quick Setting Extra Thin Cement when you are looking to glue parts together very quickly, in order to move onto the next step of the building process faster. It is also recommended that you are sure of your parts attachment and fit when using this faster setting glue. The Quick Setting Cement typically dries in under 10 seconds.NOTE: Not recommended for larger gaps or for use with elastomer (used on tank tracks) as it can cause brittleness.

A surfacer containing a primer component. [Precautions for use] Store out of reach of children and be careful not to accidentally swallow or eat. Since it contains organic solvent, improve ventilation both during painting and drying. When spraying paint, be careful not to get it on people or objects. Wear a mask and gloves during handling to avoid touching the skin as much as possible. If it gets on your skin, wash it with soapy water. In case of contact with eyes, rinse with water. If you feel sick, rest in a clean air. Seek medical attention immediately if you experience pain or changes in appearance. Cover the remaining paint and do not store it in direct sunlight, near heaters, or in rusty water or humid places in cans to prevent damage. Do not apply in places with fire. Do not use for anything other than painting.

Attached to a flexible sponge base, the abrasive coat of this sanding sheet is well-suited to removing protrusions on plastic models and also finishing materials such as wood and metal. The sponge's flexibility allows even finishing of curved surfaces and hard-to-reach corners. This item can be easily cut into the desired shape/size using a modeling knife. Suitable for wet sanding use. Abrasive material: Aluminum oxide Grit size: equivalent to #800-#1000 Sponge thickness: 5mm

Attached to a flexible sponge base, the abrasive coat of this sanding sheet is well-suited to removing protrusions on plastic models and also finishing materials such as wood and metal. The sponge's flexibility allows even finishing of curved surfaces and hard-to-reach corners. This item can be easily cut into the desired shape/size using a modeling knife. Suitable for wet sanding use. Abrasive material: Aluminum oxide Grit size: equivalent to #500-#600 Sponge thickness: 5mm

Tamiya Masking Tape is thin, very strong adhesive tape for modeling use. It even adheres well to uneven surfaces. It's ideal when sharp and crisp lines are required. This tape will not absorb paint color, or leave unsightly marks, making it perfect for use with painted or unpainted scale plastic or radio control models.

Tamiya Masking Tape is thin, very strong adhesive tape for modeling use. It even adheres well to uneven surfaces. It's ideal when sharp and crisp lines are required. This tape will not absorb paint color, or leave unsightly marks, making it perfect for use with painted or unpainted scale plastic or radio control models.

Tamiya Masking Tape is thin, very strong adhesive tape for modeling use. It even adheres well to uneven surfaces. It's ideal when sharp and crisp lines are required. This tape will not absorb paint color, or leave unsightly marks, making it perfect for use with painted or unpainted scale plastic or radio control models.