Master Grade no Preorder

The GN-0000/7S 00 Gundam Seven Sword (aka 00 Gundam Seven Sword, 00 Seven Sword), is a weapons pack/equipment variation for the GN-0000 00 Gundam that appeares in the Mobile Suit Gundam 00V side story. It is later given a additional weapon and re-designated as GN-0000GNHW/7SG 00 Gundam Seven Sword/G. With Celestial Being (CB) rebuilding their organization after their defeat in A.D. 2308, they began development of the 3.5 and 4th generation Gundams. The lone 4th generation Gundam, the GN-0000 00 Gundam, had undergone continuous beta testing of its experimental Twin Drive System by members of CB's engineering team and Tieria Erde. The original 00 Gundam was made as a close combat mobile suit, normally equipped with its GN Sword II. However, CB soon realized that the 00's basic arms would not be enough to counter the rapidly advancing mobile suits developed by the Earth Sphere Federation. Taking inspiration from the GN-001 Gundam Exia's diverse Seven Sword System, CB engineers created the Seven Sword package for the 00 Gundam, improving the units effectiveness in close combat while also attempting to stabilize the Twin Drive System.The original Seven Sword System was designed specifically for the Gundam Exia. Armed with one GN Sword, two GN Blades, two GN Beam Sabers and two GN Beam Daggers, the package was meant bring out the full close combat fighting strength of the Exia. Coupled with the close combat fighting style of its Gundam Meister Setsuna F. Seiei, Exia served its role as the close combat Gundam prior to is disappearance after A.D. 2308. Seeking to do the same with the 00 Gundam, CB engineers incorporated a mix of technologies into the 00 Gundam's Seven Sword armament. Befitting its name, the 00 Gundam Seven Sword was armed with 7 close combat weapons; the experimental GN Katars, the standardized GN Beam Sabers, the long and short GN Sword IIs, and the large GN Buster Sword.The 00's GN Beam Sabers were significantly improved from the Exia's. Originally, Exia had a set of four beam blades, a pair of daggers and a pair of normal beam sabers. While they were helpful in a few situations, the sabers' lengths were non-adjustable for differing combat situations. With that in mind, CB engineers created the beam sabers to be adjustable in length, increasing their overall efficiency in combat.The GN Katars are mounted on the sides of the 00 Seven Sword's kneecaps, which must be exchanged with the standard white kneecaps to properly holster the weapons. The design is taken from the famous Indian weapon, as well as the 00's GN Shields. The GN Katars are meant as push daggers for stabbing into an enemy. To enhance their capabilities, CB engineers equipped the katars with GN Particle infused blade edges, consisting of the material used in GN Condensers. While attacking, the particles surrounding the katar are converted to heat, and the heat is transferred to the object the katar comes into contact with. However, the heat generated by the particles can be too much for the katars themselves to tolerate. The experimental weapons inspired a line of other condenser infused weaponry for the next generation of Gundams.Taking a design cue from the Exia's GN Blades, CB engineers created the GN Sword II Long and GN Sword II Short. While both swords are physical exaggerations of the aforementioned blades, they vastly differ in function. The GN Sword II is more of a traditional broadsword, able to switch between rifle and sword mode faster than the original Exia could. The long GN Sword II focuses on ranged combat, the only such weapon in the 00 Seven Sword arsenal to do so. The drawbacks are that the long sword uses more particles and a decreased rapid fire capability. In contrast, the GN Sword II short was developed analogous to the GN Short Blade from the Exia. The shortest sword in the Seven Sword armament, the Short Sword's blade tip is attached to a wire, which can be shot out towards an enemy and retracted quickly. Despite these armaments, the signature weapon of the Seven Sword arsenal is the GN Buster Sword.At nearly the same height as the 00 Gundam, the GN Buster Sword is a massive weapon which serves multiple purposes. CB engineer Ian Vashti analyzed the Buster Sword of a GNX-607T/AC GN-XII Sword captured by Fon Spaak in the sword's development. Normally stored on the left GN Drive mount, the GN Buster Sword can expand its frame to particle vents to create a massive GN Field. The scope of the field is so large that it can protect allied suits. When the sword is actively wielded, it is a top class melee weapon. Though the array of weapons were tailored to suit the fighting style of Setsuna F. Seiei, the Meister as well as his Gundam, had been missing during the Seven Swords' development. On top of that, the pack did not stabilize the highly unstable Twin Drive System, and a separate support unit, the GNR-010 0 Raiser, was given a higher priority than the Seven Swords. However, CB hadn't forgotten about the Seven Swords configuration.After the battle with the Innovators, the 00 Gundam had taken some damage, but the greater concern was the fact that its GN Drives were critically damaged in the duel between the GN-000 0 Gundam and the GN-001REII Gundam Exia Repair II. With the 5th generation Gundams in construction, CB developed a modified version of the 00 Gundam Seven Sword, the GN-0000GNHW/7SG 00 Gundam Seven Sword/G as a test-bed for future weapons and systems.

GN-001/hs-A01 Gundam Avalanche Exia (aka Gundam Avalanche Exia, Avalanche Exia) is a variant of the GN-001 Gundam Exia appearing in the side stories Mobile Suit Gundam 00V and Mobile Suit Gundam 00V: Battlefield Record. The Gundam Avalanche Exia is the Celestial Being's Gundam Exia equipped with additional high mobility unit known as "Avalanche Unit". The Gundams have exceptional flight control capabilities through the use of GN Particles, but their speed in the atmosphere and in space are generally inferior to that of specialized high-speed units such as aircrafts. Celestial Being's general mechanic, Ian Vashti, designed and created the Avalanche Unit to grant Exia a high level of mobility comparable to an aircraft's. This concept of utilizing a mobile suit like an aircraft is very similar to the AEU's, and might have been because Ian was previously the chief mechanic of AEU's armed forces and is highly skilled in such utilization of mobile suit.The multiple parts that make up the Avalanche Unit are equipped with GN Condensers and by discharging all their stored GN Particles through various verniers simultaneously, the Avalanche Exia can achieve a higher level of mobility. Additionally, during high-speed movements, the Avalanche Exia's forearm and shoulder parts are linked together in a quasi-transformation like manner. This reduces air resistance and generates a thin GN Field on the machine's surface to control the airflow on the exterior. The name, Avalanche, carries the meaning of "passing by in an instant, consuming everything in its path" and like its name, the mobile suit can outspeed the latest aerial combat mobile suits such as the SVMS-01 Union Flag, AEU-09 AEU Enact and even its fellow Gundam, the transformable, high-speed GN-003 Gundam Kyrios. The "hs" in its model number stands for "High Speed" and the "A01" means "Avalanche type Unit 1".The drawbacks of the Avalanche Exia are that it takes an hour to fully charge the Avalanche Unit's GN Condensers with GN Particles, which will be completely discharged in 10 minutes, limiting the use of the mobile suit to an extremely brief period of time and restricting its travel range. Even so, the Avalanche Exia still has high utility value as it allows the Exia to reach its combat location swiftly. While the one-hour charging time seems to make the Avalanche Exia unusable for unplanned missions, this issue is resolved to a certain degree as Ian always keeps the Avalanche Unit's GN Condensers fully charged. It is possible to extend the discharge time of the GN Particles and increase the travel range by concentrating the Avalanche Exia's supply of GN Particles to the verniers as well as lighten the Gundam by removing its armaments.The Avalanche Unit's GN Condensers are larger than regular ones and can be charged with more GN Particles. Unlike the regular GN Condensers that can display information about their status on the surface, the Avalanche Unit's GN Condensers are completely internalized and so their status are instead displayed on the Gundam's chest GN Condenser. As the Avalanche Unit's primary purpose is for high-speed movement, it does not come with additional weaponry. All the weapons of the normal Exia remain usable by the Avalanche Exia, but due to its higher speed, the Exia's characteristic seven swords have improved penetration and destructive power. To prevent the seven swords from being a hindrance during high-speed movements, they are all stored on the Avalanche Exia's upper body, with the majority mounted on a pair of weapon holders known as "Weapon Arms".The Avalanche Exia was seen relatively early during Celestial Being's armed interventions, and the Avalanche Unit's weight is kept below 5 tons as that was initially thought to be the maximum possible weight without negatively affecting the Gundam's balance. However, this assumption was later found to be wrong, and additional equipment is developed for the Avalanche Exia, resulting in the GN-001/hs-A01D Gundam Avalanche Exia', which is better adapted for operating in space. To prevent the Avalanche Unit from being a dead weight after use, its parts can be instantaneously purged from the Exia prior to the Gundam engaging in close combat.

The GAT-X105+AQM/E-X01 Aile Strike is a prototype high mobility mobile suit introduced in Mobile Suit Gundam SEED. Its primary pilot was Kira Yamato before it was passed down to ace pilot Mu La Flaga. The AQM/E-X01 Aile Striker is the most commonly equipped Striker pack for the Strike as it provides the greatest versatility. Thanks to the powerful vernier thrusters built into the Aile Striker, the Strike Gundam becomes an all purpose combat mobile suit with enhanced speed and maneuverability compared to its base capabilities.Despite the strength of the thrusters, they do not perform well enough for true flight capabilities inside Earth's atmosphere. However, they do allow the Strike to glide in the air for a short time and enhance its jumping capabilities to the point that it can combat mobile suits on Guuls that are flying low. Besides the standard armament of the GAT-X105 Strike Gundam, the Aile Striker pack adds a pair of beam sabers to the suit's armament.

The MS-14S (YMS-14) Gelgoog Commander Type is a commander mobile suit that entered production as the MS-14A Gelgoog. Featuring a high-powered generator, various thrusters to aid mobility, a large pointed oval-shaped shield, a Beam Rifle, and a Beam Naginata, the MS-14S Gelgoog Commander Type rivals the capabilities of the Earth Federation's RX-78-2 Gundam. In fact, compared to the Gundam, the Gelgoog Commander Type is slightly faster, more mobile and possesses a more powerful generator and beam weapon selection; this was proven by Char during his first sortie in his personal unit against Amuro Ray's Gundam during the One Year War. On the other hand, it has thinner and less durable armor than the Gundam (which is built with Luna Titanium Alloy), and the lack of built-in weapons makes the Gelgoog easier to disarm (which Amuro literally did) and leave weaponless.

The MSN-06S Sinanju Stein (aka Sinanju Stein) is a mobile suit featured in the PlayStation 3 video game Mobile Suit Gundam UC and UC-MSV. Built from the data of both the MSN-04 Sazabi and RX-93 ν Gundam, the Sinanju Stein was developed as part of the Earth Federation Forces reorganization plan known as the "UC Project". Stein means "stone" in German and Norwegian, and the Sinanju Stein's name was a reference to it being "a jewel in the rough". This mobile suit was created by Anaheim Electronics to test the sensitivity and durability of the lightweight and rigid material, the Psycho-Frame, for use in a mobile suit's internal movable frame. The Sinanju Stein was also equipped with a Psycommu system, and the "Intention Automatic System", which functions by using the Psycho-Frame's sensitivity to the pilot's thought-waves to directly affect behavior of the mobile suit.The suit boasts high mobility and features flexible thrusters on its legs and backpack, allowing it to achieve precise movements at high speeds. Due to its murderous acceleration, it was impossible for ordinary pilot to control the Sinanju Stein, and its evaluation tests were conducted on autopilot to test the limits of the Psycho Frame. Therefore, the Sinanju Stein can be said to be a defective machine for humans to pilot, but in reality, it was designed to be flown by Newtypes, as Anaheim Electronics was planning to hand it over to the Neo Zeon remnant group, the the Sleeves, in a backroom deal, in the form of a transfer disguised as a robbery.Two lines of mobile suits were later developed using the Sinanju Stein as a base. These were the RX-0 Unicorn Gundam and the MSN-06S Sinanju. The Unicorn Gundam was thought to be developed by based on the data of the Sinanju Stein's test. The Sinanju was refurbished using one of two units stolen the Sleeves, and had its response levels tuned down as its controls were too sensitive. Due to how famous the Sinanju later became, the Sinanju Stein was also referred to as "The stone from which Full Frontal's Sinanju was hewn". The other stolen unit was also embellished with the engravings of the Sleeves and deployed in battle over RX-0 Unicorn Gundam 03 Phenex. What is Ver.Ka In 2002, Bandai started releasing a Master Grade line under the label of “Ver. Ka” (Version Katoki), in honor with veteran mecha designer Hajime Katori. Some of the Ver. Ka kits were produced as a result of annual fan votes.

The RX-0 Full Armor Unicorn Gundam (aka Full Armor Unicorn, Unicorn) is the RX-0 Unicorn Gundam equipped with an array of weapons. It is piloted by Banagher Links. The Full Armor Unicorn Gundam was an enhancement plan devised by Takuya Irei while aboard the Nahel Argama and is based on his extensive knowledge of mobile suits. After Banagher's Newtype potential manifests itself, the psycoframe changes color to a vibrant green. Unlike other mobile suits with the Full Armor designation, the FA Unicorn does not have any additional armor for the MS itself (except additional shields). However, it does introduce a large array of weapons, which are added to the legs, backpack and forearms.The new array of weapons includes two backpack-mounted hyper bazookas, numerous hand grenades, two grenade launchers, two missile pods, three pair of Gatling guns, and two additional shields, one on the backpack and the other on the right forearm. The backpack also features two boosters taken from a Base Jabber Type 94 to compensate for the increased mass, with one of the additional shields situated between them. Thanks to its large amount of armament, the Full Armor Unicorn Gundam can handle any combat situations, and all the added weaponry can be ejected whenever their ammunitions are spent to avoid becoming dead-weight. Like the normal Unicorn, the Full Armor Unicorn can take control of an enemy's psycommu weapons, even Quasi-Psycommu bits, when the NT-D is activated. What is Ver.Ka In 2002, Bandai started releasing a Master Grade line under the label of “Ver. Ka” (Version Katoki), in honor with veteran mecha designer Hajime Katori. Some of the Ver. Ka kits were produced as a result of annual fan votes.

The MSM-07S Z'Gok Commander Type is a variant of the MSM-07 Z'Gok created by the Principality of Zeon during the One Year War. An improved, higher performance model of the Z'Gok, it has higher reactor output, better maneuverability and a change in armor materials. It eventually became the standard Z'Gok model.

The GN-001 Gundam Exia (aka Exia, Gundam Seven Swords) is a mobile suit featured in season one of Mobile Suit Gundam 00 and is piloted by Setsuna F. Seiei. Specializing in close combat and armed mainly with melee weapons, the Gundam Exia is one of four Gundams deployed in AD 2307 by the paramilitary organization, Celestial Being, to eliminate world conflicts through armed interventions. To fight against the world with their small numbers and win, these Gundams have overwhelming power and equipped with advanced technology a century ahead of its time. Notably, the semi-perpetual GN Drive mounted in the center of the Gundams provide almost limitless energy and generates special, multifunctional GN Particles. The GN Particles grant outstanding mobility, including independent flight capabilities, and are also utilized for beam weaponry, attitude control, and stealth purposes as the discharged particles can cause electromagnetic interference, leaving conventional communication and radar devices useless. The Gundams also share common aspects with conventional mobile suits, such as the use of E-Carbon for its armor material. However, the Gundams' E-Carbon has higher defensive power due to the use of advanced materials.An example of Exia's overwhelming power is that its output was estimated to be about six times that of the SVMS-01 Union Flag, one of the newest conventional mobile suits at the time. The technical hurdles that had to be overcome to create the powerful Gundams and their GN Drives were high, making their production extremely difficult and caused the Gundams' development to occur in phases. The first generation machine, the GN-000 0 Gundam, established the basic system of a mobile suit powered by a GN Drive, and armed with a beam gun and beam saber. Subsequently, four second generation machines were developed with individual capabilities required for armed intervention, and their data served as a basis for the third generation machines, which included Exia and the other three Gundams deployed in the armed interventions. Specifically, Exia was developed from the GNY-001 Gundam Astraea, a general-purpose mobile suit with human-like movability that was used for testing various weapons, and the two machines have a number of similarities in terms of appearance.The Astraea's movability aspect is particularly appropriate for the Exia, which requires the same range of articulations as the human body due to its close combat specialization. Thus, while the Exia is armed mainly with melee weapons, its basic performance remains that of a general-purpose mobile suit. In fact, Exia is the only Gundam deployed for the armed intervention that has a body structure capable of range of articulations like the human body's, and the omission of such a structure in the other three Gundams is simply because they do not require it as their specialization is in other areas. To achieve its wide range of articulations, Exia has the most complex basic frame out of the four Gundams, its armor is also more minutely segmentalized as well. This armor design however causes some internal structures and the joints to be unprotected during certain poses, lowering Exia's defensive capability. On the other hand, this design does provides better mobility, giving Exia the best projectile evasion capability among the four Gundams.The Exia also has finer attitude control capabilities than the other Gundams, which is beneficial for close combat, and this is related to its GN Cables. The GN Cables, also known as “GN Power Lines”, are the light purple-colored cables running through various parts of the Exia's body and also one of its eye-catching visual features. While these cables are also found on other Gundams, the ones extending from the shoulders to the upper arms are unique to Exia. The cables facilitate the supply of tremendous amount of GN Particles, and thus energy, to each part of the Gundam instantaneously. They are also used for attitude control due to the GN Particles' mass reduction effect, and so, the Exia which has more cables on its exterior than the other Gundams is able to achieve finer control. In terms of defense however, such placements are dangerous, and later in GN-001REII Gundam Exia Repair II, the cables become mostly stowed in the armor.The GN Particles' mass reduction effect also lightens the Gundam, and can be used to alter the mass ratio of various body parts. Due to this latter ability, it is possible to freely control the machine's inertia and turning capabilities when in the air, and for Active Mass Balance Auto-Control (AMBAC) when in space. This also eliminates the need for the legs to "walk” when moving. As for the control of GN Particles, it is largely carried out by the two clavicle antennas on the Gundam's torso. A minor role is played by the third generation Gundams' head antenna, which is experimentally equipped with particle control functions. The head antenna also has communications and radar search functions, as well as the black box for quantum communication linkage with Veda (the Celestial Being's quantum computing system). The rest of the Gundams' humanoid head unit also contain systems responsible for controlling the entire body, much like a human's head. On a side note, the Exia's head is designed to look like the helmet of the pilot suit worn by the Gundam Meisters in AD 2307-2308 to express the belief of “Meister = Gundam”.While the GN Drive can produce GN Particles endlessly, even when the Gundams are inactive, there is a limit to the amount that could be instantaneously produced. Thus, continuous or heavy usage of beam weapons and other GN Particles consuming systems might cause the Gundams to run out of particles. To avoid this, the Gundams have GN Condensers in various body parts to store excess GN Particles. For maintenance purposes, the condensers can display the particles' compression rate and the amount stored. During mission, this display function is used for transmitting coded messages to allied units. On the matter of GN Drives, Celestial Being only created five units as that was deemed to be the minimum needed for armed interventions. The low number is not only due to difficulties in manufacturing the GN Drive, which requires Jupiter's high gravity environment, but also because having more GN Drives would increase the risk of them falling into the enemy's hands.The Gundam Exia is nicknamed “Gundam Seven Swords” as its development code was “Seven Swords”, and as indicated by this name, it is equipped with a total of seven blades to meet the needs of the moment during combat. Of these seven, the GN Sword, GN Long Blade, GN Short Blade are physical blades, while the rest are beam-based and consisted of two GN Beam Sabers and two GN Beam Daggers. The GN Sword serves as the primary weapon and due to its low energy consumption, the Exia has an advantage in prolonged combat, which mainly occurs when fighting ace pilots or when subjected to traps such as the three major bloc's joint military exercise. The three physical blades also serve as countermeasures against GN Field, a protective barrier made of GN Particles. In other words, Exia is also intended to fight against Gundam/GN Drive-equipped machine that is piloted by a betrayer or captured by the enemy and used against Celestial Being. Early on, an alternate configuration of the GN-005 Gundam Virtue also had an anti-betrayer role, but its design was dropped and this increased the responsibilities placed on Exia and its Gundam Meister.Other armaments include a GN Shield for defense that also provides protection to the internal structures and joints that might be exposed during movements. The GN Shield is usually in a compact size to maintain Exia's range of articulations, but can expand to increase the defensive area when needed. Similarly, the GN Sword, can fold its blade and has a Rifle Mode for ranged combat. The last of Exia's armament is another ranged weapon in the form of a pair of low-power GN Vulcans mounted in the forearms. During battles, the Exia gloriously sliced through its opponents in close combat, leaving a powerful impression on those who witnessed it and contributing greatly to the instillment of a "fear of Gundams" in the world. This was already anticipated by Celestial Being, and it is because of this that the organization's tactical forecaster, Sumeragi Lee Noriega, selected the Exia to intervene in the AEU-09 AEU Enact's presentation ceremony, which became the unveiling of the paramilitary organization.The Gundam Exia has an "Over Boost Mode" that temporarily boosts its GN Drive's performance and thus increase the mobile suit's capabilities. During an emergency, the Exia can activate a special "Trans-Am System" that enhances its thrust and defensive capabilities, as well as increase its output to three times that of its normal specifications for a limited period of time. This system also causes the Gundam to glow red, but it is a double-edged sword as Exia's performance will drop dramatically once it ends. A number of additional optional equipment was also developed for Exia, such as the high mobility Avalanche Unit and the GNR-001E GN Arms Type-E support machine. When equipped with the Avalanche Unit, the Exia becomes the GN-001/hs-A01 Gundam Avalanche Exia and can speed past specialized high-speed mobile suits, which it normally cannot do despite having remarkable mobility. When docked with the GN Arms Type-E, the Exia becomes the GN-001+GNR-001E GN Armor Type-E, obtaining better mobility, offensive and defensive capabilities.

The MSN-001A1 Delta Plus (aka δ Plus) is a variant of the MSN-001 Delta Gundam which appears in the novel and OVA Mobile Suit Gundam Unicorn. It is piloted by Riddhe Marcenas. The Delta Plus is a prototype transformable mobile suit developed in U.C. 0090, which can serve as an all-purpose attack unit. It is based on the MSN-001 δ Gundam, a transformable mobile suit designed during the Gryps Conflict that, because of problems with insufficient frame strength, was completed as the non-transforming MSN-00100 Hyaku Shiki. While Anaheim Electronics was trying various approaches to develop a production model of the transformable Zeta series, it also simultaneously conducted a reinvestigation of the shelved Delta plan, creating the Delta Plus as a result. The Delta Plus' main feature is its capability to reenter the atmosphere unassisted thanks to its ability to transform into a waverider mode. It is also capable of atmospheric flight under the influence of 1G because of its high thrust output and is also equipped with a Bio-sensor. Due to the Delta Plus being a non-standard prototype, only a limited number of these units were produced.

The GAT-X102 Duel Gundam is a mobile suit introduced in the anime Mobile Suit Gundam SEED. It was piloted by Yzak Joule. The Duel Gundam is the first unit to be developed in the Earth Alliance's G Project series of prototype MS. Equipped with the new Phase Shift armor that makes it nearly impervious to most physical weapons, the Duel is designed as a general-purpose machine that has well-balanced performance, and also serves as a development base for the other MS in the project.The Duel's armament consists of two head-mounted "Igelstellung" 75mm multi-barrel CIWS guns, which later become standard weaponry on most Earth Alliance's suits to intercept incoming missiles and closing in enemy units, two beam sabers stored on the backpack and hand-carried for use in close combat, a 57mm high-energy beam rifle with an attached 175mm grenade launcher for ranged combat, and an anti-beam coated shield for defense. Duel also has a rail bazooka as an optional weapon, but it was taken and used by MBF-P01 Gundam Astray Gold Frame to escape from Heliopolis.After being stolen by ZAFT and damaged in battle with the GAT-X105+AQM/E-X01 Aile Strike Gundam, the suit is upgraded with the Assault Shroud. The Assault Shroud is a set of ejectable armor mounted on the Duel’s body to enhance overall combat performance. It adds a "Shiva" 115mm railgun to the right shoulder and a 220mm 5-barrel missile pod to the left shoulder for additional firepower, as well as various leg and backpack-mounted thrusters for better mobility. Although the equipment worked well in space, it performs poorly under gravity due to its bulk.

The ZGMF-1017 GINN is a mass-produced general purpose mobile suit introduced in the anime series Mobile Suit Gundam SEED. ZAFT's first official mass-production mobile suit, the GINN was developed by the Heinlein Design Bureau, one of PLANT's state-run military design bureaus. It boasted higher versatility and expandability than its predecessor, the YMF-01B Proto GINN, and was capable of using a wide variety of weapons. While the GINN inherited much of its design from the Proto GINN, its mobility and maneuverability were greatly improved thanks to enhanced thrusters, including a pair of large backpack thrusters. Although classified as a Zero Gravity Maneuver Fighter, the GINN could function both in space and on Earth.In addition to the head-mounted mono-eye, which served as the mobile suit's main camera, the GINN featured a crest-shaped multi-functional sensor array with a camera at its base (with a LLLTV function), allowing the pilot to gather battlefield information in real time. This system would later be used by many ZAFT mobile suits developed between C.E. 70 and C.E. 71. Another notable feature of the GINN was that it had several hardpoints for mounting or storing its weapons, located on the left, right and back of the waist, as well as on the side of its legs.Most of the GINN's weapons were designed to combat the OMNI Enforcer's mobile armors, including its main weapons, the 76mm heavy assault machine gun and the heavy blade. To adapt to various battlefield situations and combat requirements, such as anti-ship combat or fortress assault, a wide range of optional weapons were developed for the GINN. Among them was the D-type (meaning "destruction") equipment, the heaviest of GINN's weapons, designed for anti-fortification operations.The combat abilities of one GINN was said to be equivalent to that of three to five TS-MA2 Moebius mobile armors used by the OMNI Enforcer, and it could single-handedly destroy an enemy escort ship. This led to the ZAFT gaining an upper hand in the early stages of the war. Due to the GINN's excellent versatility and expandability, many variants were developed and deployed, such as the ZGMF-1017M GINN High Maneuver Type tuned for ace pilots, and the ZGMF-LRR704B GINN Long Range Reconnaissance Type for reconnaissance. Additionally, there are GINN units customized to suit their pilots, such as the ZGMF-1017 Miguel's GINN.

The GN-003 Gundam Kyrios (aka Gundam Kyrios, Kyrios) is a mobile suit featured in season one of Mobile Suit Gundam 00 and is piloted by Allelujah Haptism. In AD 2307, the paramilitary organization, Celestial Being, deployed four third-generation Gundams with the objective of eradicating world conflicts through armed interventions. The Gundam Kyrios is one of them and its most prominent feature is a transformation mechanism for switching between MS Form (also known as "MS Mode") and Flight Form (also known as "Flight Mode", "Flight Position") which was tested by its predecessor, the second-generation GNY-003 Gundam Abulhool. The Kyrios' mobility and maneuverability are greatly enhanced in Flight Form, exceeding those of the other Gundams and mobile suits utilized by the three major powers. The transformation mechanism also grants high operability, allowing Kyrios to carry another mobile suit on top during Flight Form and a partial transformation where its upper body turns into that of the MS Form's is also possible. Like its fellow Gundams, Kyrios has a semi-perpetual GN Drive in the center of its body that provides almost limitless energy and produces special, multifunctional GN Particles.Mobile suits capable of switching between MS and Flight Forms are also deployed by two major powers, but they are not designed with mid-air transformation in mind like Kyrios. The old VMS-15 Union Realdo and AEU-05 AEU Hellion (belonging to the Union and AEU respectively) have incomplete transformation mechanisms, requiring parts swapping in designated facilities to operate in the different forms; although their respective successor, the SVMS-01 Union Flag and AEU-09 AEU Enact, can transform in mid-air, this is achieved through a piloting technique known as "Graham Maneuver" (also known as "Graham Special") and not an inherent feature. On the other hand, the Kyrios has a complete transformation mechanism enabled by a control system using the special GN Particles. As a result, not only can Kyrios freely transform within and outside of the atmosphere, it also gains mobility, maneuverability and versatility that greatly surpassed those of other mobile suits with Flight Forms. It should be noted that Kyrios' transformation still requires some degree of piloting skills, but can theoretically be performed by anyone.The Kyrios' cockpit is similar to other Gundams', but the control system differs due to its Flight Form and the pilot seat can rotate to match the different forms. Another feature that takes into account the Flight Form's design is the mounting of Kyrios' main thrusters, a pair of GN Verniers, on the outer side of each leg. Such a layout is rare for Gundams, where the main thrusters are often located on the back and waist, and ensures the verniers face backward to generate high thrust during Kyrios' Flight Form. The GN Verniers create thrust by releasing GN Particles, and have a mechanism whereby their cores are revealed when being activated and when increasing their output. While all Gundams can fly due to the use of GN Particles, only Kyrios can achieve high-speed flight due to its more aerodynamic shape while in Flight Form. Various sensors are built into the Flight Form's nose unit, giving it high detection capabilities. Due to the nose unit and stabilizer being folded onto the back while in MS Form, the conical rear cover of the Kyrios' GN Drive has a flatter end than the other Gundams'.Light purple-colored "GN Cables" in various body locations facilitate the supply of GN Particles to each part of the Kyrios and for attitude control purposes via the particles' mass manipulation ability. These GN Particles are also utilized for beam weaponry, generation of defensive GN Field barrier, and stealth purposes as they can cause electromagnetic interference, leaving conventional communications and radar devices useless. Additionally, by maximizing its particle emission and deploying them in front of itself, Kyrios can conduct atmospheric entry on its own. This is because the emitted particles can shield the Kyrios from the aerodynamic heating caused by the adiabatic compression during the entry process. A pair of torso-mounted clavicle antennas serves as the primary control device for these special particles, and GN Condensers are placed throughout the body to store excess particles, ensuring a reserve that the Kyrios can rely on when its operation consumed more particles than what the GN Drive can produce instantaneously. All these GN Particles related features are also found on the other Gundams.Compared to other Gundams, Kyrios' armament configuration is simple and consisted of GN Beam Submachine Gun, GN Shield, GN Beam Sabers and GN Vulcans, but its high mobility enabled it to display high combat capabilities. It can also mount optional weapons in the form of GN Hand Missile Units, Tail Unit equipped with various missiles and air-to-surface bombs, and Tail Booster with large GN Verniers and GN Cannons. Its MS Form has a balance of ranged and melee combat capabilities, with destructive power comparable to its fellow Gundams, while its Flight Form excels at high-speed hit-and-run attacks. With the Tail Unit attached, the Flight Form can adapt to a variety of missions, and when fitted with the Tail Booster instead, the Flight Form's mobility and firepower are boosted. Like its fellow Gundams, the Kyrios can activate the "Trans-Am System" during an emergency, boosting its thrust and defensive strength, as well as increase its output to three times that of its normal specifications for a limited time period. The Kyrios also glows red as a side-effect, but this system is a double-edged sword as the machine's performance drops dramatically once it ends.Optional add-on equipment was also developed, namely the Gust equipment that changes Kyrios into the GN-003/af-G02 Gundam Kyrios Gust, which has enhanced mobility, long-range attack capabilities and can operate at up to 600km in the thermosphere. Celestial Being was defeated by the UN Forces in AD 2308 and the HRL acquired the wrecked Kyrios, minus its GN Drive that was ejected prior to capture. A reborn Celestial Being then surfaced in AD 2312 with new Gundams including the transformable GN-007 Arios Gundam, Kyrios' successor with superior specifications. Around the same time, the Earth Sphere Federation's autonomous peacekeeping force, the A-Laws, deployed the new GNX-704T Ahead developed by former HRL engineers; these engineers were selected as the developers partly because the HRL seemingly gained an edge in mobile suit development through the tests they conducted on the Kyrios. Feedback from the data of the captured Kyrios was later utilized by former AEU and Union engineers in the development of the transformable GNX-903VS Brave (Standard Test Type) and its commander variant, which were deployed by the Earth Sphere Federation in AD 2314.

This is a rare China limited edition of RX-93 Nu Gundam released by Bandai.  Estimated Delivery: Late Spring / Early Summer 2023 Grade: MG Scale: 1/100 Please read our Preorder FAQ carefully before placing the order. 

The GAT-X303 Aegis Gundam is a Mobile Suit introduced in the anime Mobile Suit Gundam SEED. It is piloted by Athrun Zala. Designated as the commander unit of the Alliance's G Project due to its enhanced communication and analysis capabilities, Aegis also has heavy attack power as well as Phase Shift armor and can transform into a mobile armor (MA) due to its X300-series frame. In MA mode, it has two different sub modes, 'Cruise' and 'Attack'. When in 'MA Cruise Mode', Aegis has higher speed and acceleration, while in 'MA Attack Mode', it can destroy enemy ship/mobile suit with its "Scylla" 580mm energy cannon directly or grab onto them with its four limbs first then destroy them using the cannon. Other weaponry includes two head-mounted CIWS, a hand-held beam rifle, a shield and a beam saber in each limb.Aegis also has a large sensor unit at the top of its head and unlike most suits, its main thrusters seem to be located in the side binders on its waist. Due to the transformation system, Aegis's internal structure is more complex and it is for this reason that there are no mass production variants of the suit. The three different modes (MS Mode, MA Cruise Mode and MA Attack Mode) also means that Aegis's pilot needs to have higher skills to be able to use the suit effectively.

The RGM-89 Jegan is a mass-produced general-purpose mobile suit introduced in Mobile Suit Gundam: Char's Counterattack. A state-of-the-art machine adopted by the Earth Federation Forces in U.C. 0089 as its main force mobile suit, the Jegan comes from the lineage of the RGM-79 GM as inferred by its "RGM" model number. However, it was not developed by the Earth Federation Forces' own engineers like most previous RGM series mobile suit. Instead, it was produced and supplied by the Anaheim Electronics (AE). Created through combining the Earth Federation Forces' expertise of the GM series with AE's MS development technologies, the Jegan's performance is significantly higher than the RGM-86R GM III. It also has improved productivity due to the use of Titanium Alloy Ceramic Composite armor, as well as high operability, and excellent versatility. All these allows it to become the "next-generation standard MS", and it operated as the main force MS for a long period of time. Several variations of the MS were also developed. The original Jegan is sometimes referred to as "Jegan Type-A" to differentiate it from later variants, and should not be confused with the later RGM-89R Jegan A-Type.The Jegan highly exemplified the original concept of MS being "mobile infantry for melee combat", and is designed for close combat in and around space colonies. It can also operate under gravity without any modifications. With a backpack containing a single main thruster, two small thrusters at the bottom, and two articulated vernier arms at the top, the Jegan's thrust and acceleration performance could match-high mobility-type machines from the Gryps War-era. Its backpack also featured exchangeable propellant tanks. Also notable are the verniers for attitude controls on the front shoulder armor, enlarged centre shoulder armor sections to fit the side thrusters, and a calf-mounted thruster on each leg. The use of lightened armor grants the machine high maneuverability, its front skirt armor is removed to maintain the legs' range of articulation, while its head has a long-range sensor installed in the forehead in addition to the fixed main sensors. The Jegan is armed with mainly short-range weaponry, including a beam saber, a short-range type beam rifle, three hand grenades, a vulcan pod system, and a shield with twin missile launchers.

The ZGMF-X13A Providence Gundam is a mobile suit introduced in the anime Mobile Suit Gundam SEED and is piloted by Rau Le Creuset. Like the other ZGMF-X series of Gundams created by ZAFT in CE 71, the Providence is equipped with Neutron Jammer Canceller and powered by a nuclear reactor. It is also armored with Phase Shift armor and features armaments reverse engineered from the stolen mobile suits of the Earth Alliance. Initially designed as a close combat unit with large beam sabers, the Providence is later changed into a DRAGOON system equipped unit when Rau Le Creuset is designated as its pilot and because it could be powered by the nuclear reactor, but it still retains the heavy armor of the former's design. As this change is made after the main body's design is completed, some of the new parts could not be integrated into the body. An example is the six quantum communication cables running from the backpack to the chest that are mounted externally due to lack of interior space. Though exposed, these cables still have solid protection as they are covered by Phase Shift armor.The DRAGOON system is the Providence's main weapon and is first tested on the YMF-X000A Dreadnought Gundam. It allows pilot with high spatial awareness, like Rau, to control multiple wireless guided weapon pods through quantum communication, hence enabling a single mobile suit to simultaneously battle with multiple enemies and attack from multiple directions, including its blindspot. The Providence's DRAGOON system is mounted on the large backpack and the hips, and includes 11 weapon pods that mount a total of 43 beam gun. Paired with the Multi Lock-On System, it is virtually impossible for these weapon pods to miss its mark. The suit's backpack has thrusters of different sizes to prevent loss of mobility caused by added weight of the DRAGOON Systems. Other armaments of the suit include four CIWS guns, a shield with two beam guns and a large beam saber, and a hand-carried large beam rifle. It was considered one of the most powerful mobile suits in C.E.71.

The GF13-017NJII God Gundam (aka G Gundam, Burning Gundam in the English dub) is the titular Mobile Fighter of Mobile Fighter G Gundam. It was the second Mobile Fighter used by Neo Japan in the 13th Gundam Fight, and is piloted by Domon Kasshu. The successor of the GF13-017NJ Shining Gundam, the God Gundam was developed by Dr. Mikamura almost single-handedly and customized for Domon Kasshu. Even in Normal Mode, its power surpassed that of the Shining Gundam's Super Mode. In addition, it could achieve an even more powerful state called Hyper Mode.Its chest was equipped with the Energy Multiplier System, a unique system that allows energy to be refined in a similar manner to Qi. When piloted by Domon, the King of Heart emblem would appear upon it. It was part of a larger system called the Artificial Aura Generator. The six Core Lander wings on its back (which were named "Dream", "Illusion", "Bubble", "Shadow", "Dew", and "Lightning", after a passage from the Diamond Sutra) and the two short antennas on its head serve as magnetic field generating devices, while the two long antennas function as intelligence-gathering devices. When Hyper Mode is activated, the Energy Multiplier opens up, the six wings deploy, and a ring of light appears on the God Gundam's back, coating it in a magnetic field that improves its mobility through a full-body magnet coating.The God Gundam was armed with a pair of head-mounted vulcan guns, a pair of 3-barrel machine cannons mounted on the upper chest, and a pair of beam swords known as "God Slash". In Hyper Mode, it was capable of using a finisher move known as Bakunetsu God Finger, a refined and more powerful version of Shining Finger. Its forearms were covered in armor known as "G Knuckles" or "God Finger Protectors", which were based on the finishing move of Neo Albania's Gundam Fighter during the 12th Gundam Fight.

The MVF-X08 Eclipse Gundam (MVF-X08 エクリプスガンダム?) is a custom-made Mobile Suit from the Mobile Suit Gundam SEED Eclipse manga. It was piloted by Tatsumi Hori for the Orb Disaster Relief Team.A custom Mobile Suit developed in secret by Orb. Its most prominent feature was its ability to transform from a flight form to an MS form. It was equipped with a Mirage Colloid function, and was armed with functions specialized for the ODR, an organization that excelled in covert operations. Two units have been confirmed to exist.The MVF-X01 Eclipse was also developed with the aim of giving an MS the functions of a supersonic fighter capable of operating at ultra-high speeds, high altitudes and cruising extremely long-distances. Unlike the MVF-M11C Murasame, which was also a transformable aerial combat MS developed by Orb to defend territorial waters and airspace, the Eclipse had capabilities that allowed it to attack enemy bases. Although these Mobile Suits have similar model numbers, they are machines created with different design philosophies.Eclipse is a special mobile suit that it places burden on a bodily-inexperienced pilot, as revealed in chapter 12 Gundam Seed Eclipse manga, where Tatsumi Hori spilled his blood from his mouth as he couldn't take the attack pressure from both Ginn Gladiator and Aile Calamity Gundam.

The RGM-79[G] GM Ground Type is a ground based predecessor to the RGM-79 GM. It first appeared in Mobile Suit Gundam: The 08th MS Team. An early prototype of the Earth Federation Forces' mobile suit mass production project, the GM Ground Type was developed before the RX-78-2 Gundam's operational data was recovered. Even though it was only able to operate on Earth, its internal parts were all tuned for ground combat, and it was equipped with Luna Titanium armor, causing its mobility, maneuverability, and general performance to surpass the later RGM-79 GM.It is said that its performance under gravity even rivals that of the RX-78.The GM Ground Type was a simplified version of the RX-79[G] Gundam Ground Type, and produced using the same production line.Compared to the Gundam Ground Type, the GM Ground Type omitted the chest-mounted Vulcan gun and multi-launcher, the weapon container mount on the backpack, and was equipped with a less powerful generator.It also did not incorporate parts from the RX-78 series, though its head unit was similar in specs to that of the RX-78's.Since it was produced after the production format was established, its ease of production, ease of maintenance and availability of parts were all greater than its predecessor.Due to its use of Luna Titanium alloy, it was unsuited for mass production and produced in limited numbers. However, the GM Ground Type was important in establishing the EFF's mobile suit production framework. The operational data it collected contributed to the development of later mobile suits.Finally, the basic structure of its head was later inherited by the RGM-79 GM, becoming the iconic face of Federation mass production mobile suits.

The RGM-79SP GM Sniper II (ジム・スナイパーII Jimu sunaipā II?) is a variant of the RGM-79G GM Command and first appeared in Mobile Suit Gundam 0080: War in the Pocket. Based on the GM Command series and the concept of the RGM-79SC GM Sniper Custom deployed earlier in the war, the GM Sniper II is a high-performance machine capable of using specialized weaponry at maximum capacity for ultra-long range engagements. It was the last and most advanced of the Federation's line of GM Sniper mobile suits during the One Year War. It was also one of the last GM-type units to be developed during the war.The GM Sniper II's specialized head visor has built-in compound sensors with specialized laser sensors, powerful zoom cameras and image stabilizers for precision, long range targeting. During operation, goggles cover the main camera and other elements of the head sensor array, and together with head unit coolers, they physically eliminate noise interference and enhance long range sniping capabilities. The suit is one of the few capable of accurately firing MS sized sniper rifles that used physical projectiles. Unlike beam weapons, these rifles are not affected by magnetic forces or solar winds, but only a few were made.Operationally, the GM Sniper II was used to eliminate priority targets such as base ships and command machines from beyond the range of conventional weapons. However, the suit is not just a long-range specialist. Like the highly regarded GM Sniper Custom deployed earlier, the GM Sniper II maintains versatility while having enhanced performance. It has sufficient specifications for mid-range support and close combat, and can use almost any existing MS armament. In terms of overall performance, it was one of the few machines to match the RX-78-2 Gundam, which was the standard against which other Federation suits were held to. In fact, its specifications on paper were superior to the Gundam's, and it was one of the few Federation production suits that could take on the MS-14A Gelgoog in a one-on-one fight.The armor of the GM Sniper II is reinforced with pieces of Luna Titanium alloy, and mobility is improved via sub-thrusters in various locations and a total of six large vernier thrusters – two in the backpack and four on the legs. The four large vernier thrusters in the legs have high output to make up for the shortfall in the output of the backpack thrusters, which are designed for precision, and boasts superb pitching performance (rapid up and down movements). The suit's main verniers are built along the machine's core axis, an arrangement also used in later MS such as the MSA-003 Nemo and RGM-89 Jegan. This is an effective way to boost mobility while maintaining the same basic silhouette. The suit's torso is an upgraded version of the GM Command's, and has superior specifications with additional waste heat and electrical noise suppression material. Its arms are constructed with the same parts used in other GM models, but with highly tuned servos and actuators and an updated driver.Only very few GM Sniper II were manufactured due to it being developed late in the war. Production costs were also undeniably higher than standard mass-produced machines, and apart from a few prototypes built for test purposes, the suit did not have any follow up models. The GM Sniper II was however used as the basis for the RX-80, a mobile suit that became the base unit for the Project Pale Rider. It is believed that the GM Sniper II's development team later worked on the Nemo, but this is unconfirmed. Due to the GM Sniper II's excellent performance and shooting capabilities, it continued to be used for sniping missions long after the war ended. Units deployed by the Titans have a dark blue color scheme and updated features such as a new optical camera system for long-range shooting and improved sensor radius.