Featured

KOSMOS LED Lighting System for MGEX 1/100 Strike Freedom Gundam (RGB Upgrade Kit) The KOSMOS LED Lighting System for MGEX 1/100 Strike Freedom is a third-party RGB lighting upgrade engineered to illuminate the wings, internal frame, and head unit of the MGEX Strike Freedom. Featuring multi-zone light control, redesigned transparent wing parts for better diffusion, and an app-capable controller, this kit transforms Strike Freedom into a premium display centerpiece. Product Highlights Designed specifically for Bandai MGEX 1/100 Strike Freedom Gundam RGB multi-zone lighting system — wings and head illumination Wireless controller with mobile app support for color and animation effects Replacement transparent wing effect parts included for improved light diffusion No soldering required — plug-and-wire installation system Ideal for “Full Burst Mode” or “Wings of Light” style display setups Description The KOSMOS LED Lighting System elevates the MGEX Strike Freedom beyond standard display presentation. Light channels run through the wings and head unit, allowing builders to create dynamic visual effects ranging from static illumination to flowing gradient animations. The included replacement effect parts enhance light distribution, producing a bright and clean glowing wing appearance that is ideal for shelf display or photography. This system is designed for intermediate builders familiar with LED routing inside Gunpla frames. While no soldering is needed, careful handling during assembly is recommended to prevent pinching wires between inner and outer armor layers. Installation Notes MGEX Strike Freedom Gundam model kit not included Wing effect parts included with this LED upgrade are used in place of stock clear parts Minor trimming or adjustment may be required for ideal cable routing Always test lights before final assembly Box Contents RGB LED harness for wings and head Transparent wing effect replacement parts LED control module Power supply cable (USB or battery-powered depending on batch) Wireless remote and/or app pairing instructions Mounting aids, connectors, installation guide Specifications Brand KOSMOS Product LED Lighting System for MGEX Strike Freedom Compatibility Bandai MGEX 1/100 Strike Freedom Gundam Lighting Type RGB multi-zone LED Control Wireless module with app support Installation No soldering — internal wiring route required Backorder Notice:This item is currently on backorder and will be shipped once available. Please be aware that cancelling a backorder will incur a 25% restocking fee. For detailed information on our backorder and cancellation policies, please visit our FAQs page.

DLKHobby 1/100 ZAW-S01 Ikaruga - Universal Space Type The DLKHobby 1/100 ZAW-S01 Ikaruga (Universal Space Type) is a 1/100 scale mecha model kit produced by DLKHobby (Dilei Ke) and manufactured by Dalin. Built around a precision multi-layer skeleton system, the Ikaruga features a three-stage construction sequence - core skeleton, detailed mechanical frame, then outer armor - delivering both structural integrity and visible mechanical depth at every layer. The kit ships with 99 runners and includes a first-batch bonus of two sets of transparent replacement outer armor, allowing builders to expose the layered internal frame while maintaining a finished display appearance. Key Features Multi-Layer Skeleton System: Three-stage build process starts with a core skeleton, adds a color-separated mechanical frame (frame gray, metallic gray, and iron red), then covers with outer armor - each layer visible through optional transparent armor panels First-Batch Transparent Armor: Two sets of clear replacement armor panels included, allowing partial or full swap to reveal the detailed internal skeleton Matte-Finish Outer Armor: All outer armor parts feature a factory matte coating that gives a flat-coat appearance straight out of the box, reducing visible surface imperfections Extensive Articulation with Linked Mechanisms: Double-jointed elbows with linked hydraulic piston detail, sliding hip joints with two lock positions, and double-jointed knees with armor panels that shift in sequence during bending Full Weapon Arsenal: Includes combination beam rifle, oversized extending cannon, large shield, two beam sabers with interchangeable blade lengths, and four detachable funnel/drone units that combine into multiple configurations Interchangeable Head Components: Two forehead options (spiked and smooth), two visor styles (transparent horned and green gem), and a gray transparent full-face mask for alternate display looks UV-Reactive Parts: All transparent green and yellow parts produce a fluorescent glow under UV/blacklight Builder Context The Ikaruga is an intermediate-to-advanced build with 99 runners and a multi-stage skeleton assembly. It is snap-fit construction with mostly hidden gate marks, though some parts have larger gates that require cleanup. The yellow thruster nozzles on the shoulder armor are loose-fitting and may need glue to stay secure. Builders familiar with MG-grade Bandai kits will find the complexity and part count comparable, with additional mechanical linkage details that go beyond typical Bandai engineering. Why Build This Kit The DLKHobby 1/100 ZAW-S01 Ikaruga is one of the highest-value third-party mecha kits available at its price point, offering 99 runners, a full weapon loadout, and a multi-layer skeleton system for under $90 USD. The three-stage skeleton construction gives the finished build visible mechanical depth that most 1/100 kits - including Bandai MG - do not attempt, and the included transparent armor means builders can show off the internal frame without any aftermarket purchases. At approximately 24.8 cm (9.75 inches) tall before weapons, the Ikaruga has strong shelf presence comparable to large MG kits, and the factory matte finish means the kit looks display-ready without topcoating. Builders should note that the funnel/drone weapons are heavy enough to require the included transparent support stands for stable display, and the shoulder thruster nozzles will need a small amount of glue to prevent drop-off during handling. Box Contents 99 runners (ABS/PVC construction) Two sets of transparent replacement outer armor panels Combination beam rifle (with beam saber attachment capability) Oversized extending cannon with auxiliary handles Large shield 2 beam sabers (interchangeable long and short blade parts, foldable sword/gun mode) 4 funnel/drone units (detachable, combinable into drone configuration) 5 pairs of interchangeable hands (fists, open hands, knife hands, gripping hands, gun-holding hands) 2 forehead parts (spiked and smooth) 2 visor types (transparent horned, green gem) Gray transparent full-face mask Display stand with weapon rack arms 4 transparent articulated support bases with ring attachments Waterslide decal sheet Aluminum foil detail sticker sheet Instruction manual Specifications Brand DLKHobby (Dilei Ke) Manufacturer Dalin Product ZAW-S01 Ikaruga - Universal Space Type Scale 1/100 Height Approx. 24.8 cm (9.75 in) Runner Count 99 Materials ABS, PVC Construction Snap-fit assembly, multi-layer skeleton Skeleton Colors Frame gray, metallic gray, iron red Armor Finish Factory matte coating Product Type Plastic assembly model kit

Nilson Works Monument-FX | PG 1/60 Mecha Model Kit The Nilson Works Monument-FX is a premium PG-scale 1/60 mecha model kit featuring an angelic dual-wing configuration, long-form weapon system, and 801 total parts for a large-format building experience. With reinforced internal waist engineering designed to support heavy wing and backpack structures without external support, Monument-FX is built as a showcase centerpiece for display collectors. Product Highlights PG-class 1/60 scale mecha model kit by Nilson Works Total part count: 801 pieces Massive primary wingspan approx. 780mm Secondary wing span approx. 368mm Reinforced waist joint for backpack + wing load stability Cannon extended length approx. 460mm Shield + heat whip length approx. 575mm Base stand included for pose support and display Designed for advanced modelers seeking a high-impact centerpiece build Description Monument-FX emphasizes a grand silhouette with layered mechanical wings and a tall central frame presence. The reinforced waist system allows for stable poses even with the full wing load attached, reducing the need for additional supports. The long cannon, heat whip, shield, and dual beam sabers offer multiple dynamic posing options using the included stand. With 801 parts and PG-scale size, this build is suited to collectors who enjoy detailed assembly and want a visually commanding kit capable of dominating a display shelf or lighted case. Box Contents Monument-FX model runners (801 parts total) Cannon (with effect parts) Beam Sabers × 2 Shield Heat Whip Base Display Stand Instruction Manual Specifications Brand Nilson Works Product Monument-FX Scale PG-class 1/60 Total Parts 801 Main Wingspan Approx. 780mm Secondary Wingspan Approx. 368mm Cannon Length Approx. 460mm Shield & Heat Whip Approx. 575mm Model Type High-detail large-format mecha kit Backorder Notice:This item is currently on backorder and will be shipped once available. Please be aware that cancelling a backorder will incur a 25% restocking fee. For detailed information on our backorder and cancellation policies, please visit our FAQs page.

Official Nuke Matrix Retailer LA Scale Model is an authorized retailer of Nuke Matrix All Nuke Matrix model kits are 100% genuine and sourced directly from the manufacturer. Nuke Matrix Cyber Forest Cyclone Hopper Model Kit The Nuke Matrix Cyber Forest Cyclone Hopper is a highly articulated original mecha girl kit from Nuke Matrix’s Cyber Forest lineup. This is a Third Party Gundam Gunpla Like Mecha Model Kit and is not affiliated with Bandai or the Gundam franchise. The kit combines a humanoid character body with modular armor systems, a transformable combat motorcycle, and extensive wind-themed effect parts designed for high-mobility action displays. Key Features Dual Body Configuration: Includes both a human body and an armored body, allowing multiple display states. Vehicle Integration: Comes with the Storm Chaser motorcycle, designed to pair directly with the Cyclone Hopper character. Effect Parts: Includes multiple wind-based and attack effect parts such as Spines Cutter, High-pressure Air Cutter, Cyclone Kick, and spiral effects. Pre-painted Runners: Select runners are pre-painted to enhance surface detail straight out of the box. Display Support: Action base included for dynamic airborne and combat poses. Customization: Multiple face plates, hand types, feet options, and armor components included for varied expressions and setups. Compatibility: Includes three different neck joint sizes, compatible with other mecha girl kits on the market. Box Contents Human body x1 Armour body x1 Storm Chaser motorcycle x1 Insect Instrument Unit (helmet) x1 Backpack x1 Strike Trampler x2 Orthoptera Booster x2 Spines Cutter effect parts x2 Spines Cutter Mode II effect parts x2 High-pressure Air Cutter effect parts x2 QianJi Spiral effect part x1 Spiral Cut effect part x1 Cyclone Kick effect part x1 Armour hands x6 pairs Standard hands x7 pairs Pre-printed face plates x5 Blank face plates x5 Sneaker feet x1 pair Naked feet x2 pairs Cloth suit x1 set Matrix Driver - Acrididae Type I x1 Water decals x2 Action base Different size neck joints x3 Instruction manual Specifications Brand Nuke Matrix Line Cyber Forest Model Name Cyclone Hopper Product Type Third Party Gundam Gunpla Like Mecha Model Kit Decals Water decals included Pre-painted Parts Some runners pre-painted Display Base Action base included Compatibility Multiple neck joint sizes included for cross-compatibility Backorder Notice:This item is currently on backorder and will be shipped once available. Please be aware that cancelling a backorder will incur a 25% restocking fee. For detailed information on our backorder and cancellation policies, please visit our FAQs page.

Official SNAA RetailerLA Scale Model is an authorized retailer of SNAA. All SNAA model kits are 100% genuine and sourced directly from the manufacturer. SNAA SC-008 Soul Spear Lamorak 1/144 Model Kit The SNAA SC-008 Soul Spear Lamorak is a 1/144 scale mecha model kit and the eighth release in the Round Table Knights – Beyond Exquisite (BE) series. Lamorak is classified under the Steel Knight tier, positioned as a balanced all-round combat unit designed for both ranged suppression and close-quarters engagement. The kit features a hybrid weapon system centered on a transformable lance, integrated shoulder-mounted laser cannons, and a heavy battle axe. SNAA's Round Table Knights line is a series of twelve original mecha designs based on Arthurian legend, built around a shared inner frame system at 1/144 scale. Each kit includes pre-painted armor panels, water-slide decals, and a full inner skeleton. The series is divided into three tiers - Gale (speed), Steel Knight (balanced), and Sanctuary (elite) - with four units per tier. Key Features Hybrid Weapon System: The Spirit Lance functions as both a close-combat spear and a ranged beam cannon, switching between modes without part-swapping. The Wall Smiting Axe provides a dedicated melee option for heavy assault posing. Integrated Shoulder Cannons: Both shoulder armor panels house Divine Laser Cannons with pulse shields, giving Lamorak dedicated ranged firepower independent of its handheld weapons. Dual Face Options: Includes two interchangeable face plates - a standard dual-eye visor and a single-eye knight visor - allowing two distinct display personalities. Improved Articulation: Redesigned waist and hip joints provide some of the best poseability in the Round Table Knights series to date, with wider range of motion than earlier entries. Pre-Painted Armor Panels: White, red, and gold color scheme with pre-painted accents over multi-color separated parts. Display-ready finish without painting. Full Inner Frame: Complete articulated skeleton consistent with all BE-series kits, supporting dynamic posing and cross-unit part compatibility. Builder Context Assembly is snap-fit with pre-painted armor. No painting or cement is required for a finished display. Build complexity is comparable to Bandai RG-grade kits, with a similar part count and inner frame structure. Water-slide decals are included for detail finishing. Recommended for intermediate builders or anyone who has completed at least one RG or MG kit. Why Build This Kit The SNAA SC-008 Lamorak is the most versatile unit in the Round Table Knights lineup - it is the only kit in the series with both integrated ranged weapons (shoulder-mounted Divine Laser Cannons) and a transformable primary weapon (Spirit Lance to beam cannon), making it the strongest all-rounder for builders who want one kit that can be posed in ranged, melee, or hybrid stances. At approximately 16 cm tall, Lamorak stands at RG-class proportions but includes a full inner skeleton, pre-painted armor, and water-slide decals at a price point roughly half that of a comparable Bandai RG kit. The dual face option - standard visor or single-eye knight visor - is uncommon in the Round Table series and adds display variety without any modification. Lamorak shares visual DNA with Iron Sickie and Achilles but uses a red and white color palette that breaks from the blue/gold tones that dominate the rest of the lineup. For builders entering the Round Table Knights series, Lamorak is the recommended starting point due to its improved waist and hip articulation, balanced weapon set, and competitive pricing. Box Contents Soul Spear Lamorak main body components Spirit Lance ×1 (transforms to beam cannon mode) Wall Smiting Axe ×1 Shoulder shields with Divine Laser Cannon ×2 Alternate face plate (single-eye knight visor) ×1 Water-slide decal sheet Instruction manual Specifications Brand SNAA × Starry Craftsman Series The Round Table Knights – Beyond Exquisite (BE) Model SC-008 Soul Spear Lamorak Tier Steel Knight Scale 1/144 Height Approx. 16 cm (6.3 in) to head Material ABS, PS Finish Pre-painted armor panels with color separation Markings Water-slide decal sheet included Articulation Fully articulated inner frame (improved waist/hip joints) Face Options Dual-eye visor + single-eye knight visor Box Dimensions Approx. 300 × 195 × 100 mm Weight Approx. 0.77 kg Product Type Plastic assembly model kit IP Original third-party mecha design

Official Nuke Matrix Retailer LA Scale Model is an authorized retailer of Nuke Matrix. All Nuke Matrix model kits are 100% genuine and sourced directly from the manufacturer. Nuke Matrix Cyber Forest Fantasy Girls Lirly Bell Special Edition Model Kit The Nuke Matrix 1/12 Cyber Forest Fantasy Girls Lirly Bell Special Edition – Remote Attack Battle Base Info Tactician (天眼跃兔—Ver.镜像潜行) is a plastic assembly model kit produced by Nuke Matrix. This is a Third Party Gundam Gunpla Like Mecha Model Kit and is not affiliated with Bandai or the Gundam franchise. This kit is a 1/12 scale assembly model with an assembled height of approximately 16 cm. One complete body can be assembled per kit, with two selectable body configurations included. Box Contents Body parts x1 (one complete body per kit, two body options available) Pre-painted face parts x4 Blank face parts x4 Interchangeable hand parts x12 Quadruped robot x1 Handgun x1 Carrot missiles x2 Holographic projection system x1 Destruction cannon firing effect part x1 CP-95 assault rifle x1 Victor Type II x1 High-explosive shotgun x1 Pulse baton x1 Detail water decals x3 Crystal sticker x1 Cable wire x1 Display base and support stand x1 Instruction manual x1 Specifications Brand Nuke Matrix Line Cyber Forest Fantasy Girls Product Name 天眼跃兔—Ver.镜像潜行 Model Number FF0111V Scale 1/12 Assembled Height Approximately 16 cm Product Type Third Party Gundam Gunpla Like Mecha Model Kit Decals Water decals included Display Base Included

Official Nuke Matrix Retailer LA Scale Model is an authorized retailer of Nuke Matrix. All Nuke Matrix model kits are 100% genuine and sourced directly from the manufacturer. Overview The Nuke Matrix 1/12 Cyber Forest Fantasy Girls Vivienne Hayha CF01 F.O.X. Long-Range Striker Unit Ver. Arctic White Fox (極地白狐) is a limited-edition color variant of the CF01 Vivienne Hayha kit from Nuke Matrix's original Cyber Forest Fantasy Girls series. Originally released as a CJ2024 convention exclusive, this version features an arctic white color scheme across the entire runner set, replacing the standard navy and dark tones of the original CF01 with a winter-operations aesthetic. Vivienne Hayha is the Empire's top sniper and leader of Fox Team - the first character released in the Cyber Forest lineup and a successful test subject of the Empire's Maiden Project. Key Features Limited-Edition Arctic White Fox Color Scheme - Convention-exclusive white color variant with arctic-themed runner colors, distinct from the standard CF01 release 1/12 Scale, Approx. 16 cm Assembled Height - Full character body with articulated joints for a wide range of posing options Two Selectable Body Configurations - One complete body per kit with two build options for armored and standard configurations Seven Weapons Included - F.O.X. Type I sniper rifle, F.O.X. Type I assault rifle, F.O.X. Type II sniper rifle, pulse-type magnum, "My Fang" tactical dagger, Apocalyptor light sword, and the large cross unit (ZERO System) Pre-Painted and Blank Face Plates - Three tampo-printed face plates plus four blank face plates for custom painting Thermal Conversion Tactical Scarf - Cloth accessory with Fox Team insignia, designed for Vivienne's cold-environment sniper operative setting Water Decals and Crystal Stickers - Dedicated detail markings for enhanced surface detail Builder Context The Ver. Arctic White Fox shares the same snap-fit construction as the standard CF01 - no painting or cement is required, though the white color scheme particularly benefits from panel lining to bring out detail. Build complexity is comparable to a Bandai RG-grade kit. Builders familiar with Kotobukiya Frame Arms Girl or Bandai 30MS kits will find a similar construction approach. The white plastic can show nub marks more visibly than darker colors, so careful nub cleanup with a hobby knife and sanding sticks is recommended. Why Build This Kit The Nuke Matrix CF01 Vivienne Hayha Ver. Arctic White Fox is a limited-edition convention exclusive that offers a distinct arctic winter-operations color scheme unavailable in the standard CF01 release. With seven individually named weapons - two sniper rifles, an assault rifle, a magnum, a dagger, a beam sword, and the oversized ZERO System cross unit - the CF01 remains the most accessory-dense kit in the entire Cyber Forest Fantasy Girls lineup. The white color variant is especially suited to builders who want a striking shelf display that stands out alongside standard-color Cyber Forest kits, and the lighter plastic makes it an attractive base for custom paint schemes. As a limited release, the Arctic White Fox version is not expected to be restocked once current inventory is sold through, making it a collector-focused purchase. Builders new to Nuke Matrix should know that face plate pegs and hand joints on Cyber Forest kits are smaller and more delicate than Bandai equivalents, so dry-fitting before final assembly is recommended. Box Contents Main body parts in arctic white color scheme (one complete body, two selectable body configurations) Pre-painted face plates x3 Blank face plates x4 Interchangeable hand parts x12 Cable part x1 Large cross unit (ZERO System) x1 F.O.X. Type I sniper rifle x1 F.O.X. Type I assault rifle x1 F.O.X. Type II sniper rifle x1 Pulse-type magnum x1 "My Fang" tactical dagger x1 Apocalyptor light sword x1 Thermal conversion tactical scarf x1 Display base and support arm x1 Water decal sheet x1 Crystal sticker sheet x1 Instruction manual x1 Specifications Brand Nuke Matrix Series Cyber Forest Fantasy Girls Character Vivienne Hayha Unit Designation CF01 F.O.X. Long-Range Striker Unit Version Ver. Arctic White Fox (極地白狐) - Limited Edition Scale 1/12 Assembled Height Approximately 16 cm Materials ABS, PVC Product Type Plastic Model Kit (Assembly Required) Decals Water decals and crystal stickers included Display Base Included Backorder Notice:This item is currently on backorder and will be shipped once available. Please be aware that cancelling a backorder will incur a 25% restocking fee. For detailed information on our backorder and cancellation policies, please visit our FAQs page.

Dents & Dings – Discounted Model Kits & Hobby Items Dents & Dings is a special clearance category featuring discounted model kits and hobby-related items that have experienced box damage or cosmetic packaging wear due to shipping, handling, returns, or storage-related incidents. These items are offered at reduced cost strictly because of their packaging condition. All contents inside are complete, intact, and unassembled. The condition issue applies only to the exterior box unless otherwise explicitly stated. Important Condition Information Condition Varies: Each variant represents a unique item with its own packaging condition. Box Damage: May include dents, creases, crushed corners, surface tears, or replaced packaging. Contents Complete: All original parts, runners, manuals, decals, and accessories are included. Sales Terms Sold As-Is: All Dents & Dings items are sold in their current condition. Final Sale: No refunds, returns, or exchanges are accepted for this category. Condition-Based Discount: Pricing reflects packaging condition only. Please review the selected variant carefully before purchase. By completing your order, you acknowledge and accept the item’s condition and the final sale terms.

GM-GODOMO GM-002 Luna-Trace Model Kit The GM-GODOMO GM-002 Luna-Trace is a 1/72 scale original science fiction mecha plastic model kit. Featuring a white-and-purple color scheme with a sharp, minimalist design, Luna-Trace takes a restrained approach compared to the flashier aesthetics common in Chinese third-party mecha kits. GM-GODOMO is an emerging Chinese manufacturer whose debut product, the 1/72 Solaridian, featured a full alloy inner frame - Luna-Trace shifts to an all-plastic construction at a significantly lower price point while retaining the brand's focus on high part count engineering and layered armor design. Key Features Scale and Size: 1/72 scale, approximately 23 cm tall to the head - over 25 cm with backpack equipped. Internal Frame: Full inner frame construction designed for stable posing and structural integrity. Part Count: Over 500 parts delivering layered armor panels and mechanical surface detail. Opening Armor Sections: Multiple armor panels open to reveal internal mechanical structure. Expansion Interface: Rear universal mount designed to support future backpack and weapon expansions. Interchangeable Hands: Five pairs of hands included - open hands, sword grip, gun grip, fist, and signature posing hand. No Paint Required: Color-separated parts deliver a complete appearance straight from the box. Builder Context Luna-Trace is suited for intermediate builders comfortable with high part counts and tight-fitting assemblies. The snap-fit construction requires no cement, and the approximately five-hour build time is comparable to a Bandai MG kit. Fit is reported as tight throughout with minimal need for part modification, making it accessible despite the 500+ part count. Why Build This Kit The GM-GODOMO GM-002 Luna-Trace stands out as one of the highest value-for-parts third-party mecha kits currently available, delivering over 500 parts with a full inner frame at a domestic Chinese price of 79 RMB. For builders looking to try a Chinese third-party kit without committing to a premium price point, Luna-Trace is the lowest-risk entry point in the GM-GODOMO lineup - the Solaridian (GM-001) costs significantly more due to its alloy frame. At 23 cm to the head and over 25 cm with the backpack, the finished build has strong shelf presence for a 1/72 kit, comparable to a standard Bandai MG in height. The minimalist white-and-purple design and balanced weapon loadout give it a protagonist-mecha feel that displays well next to Real Grade or Master Grade Bandai kits. Builders should note that the beam rifle and beam sabers are the only included weapons - this is not an accessory-heavy kit, and the value proposition is in the mechanical detail and armor layering rather than weapon count. Box Contents Luna-Trace main body runners (500+ parts) Internal frame components Armor parts and external panels Beam rifle Beam sabers Five pairs of interchangeable hands (open, sword grip, gun grip, fist, posing) Instruction manual Specifications Brand GM-GODOMO Model Number GM-002 Product Name Luna-Trace Scale 1/72 Height Approx. 23 cm (head height), 25+ cm with backpack Material ABS Part Count 500+ Build Type Snap-fit plastic model kit with full inner frame Color Scheme White and purple (color-separated, no painting required) Country of Origin China Category Third-Party Mecha Model Kit

Official Motor Nuclear Retailer LA Scale Model is an authorized retailer of Motor Nuclear. All Motor Nuclear model kits are 100% genuine and sourced directly from the manufacturer. Overview The Motor Nuclear MNP-XH15 Lu Bu is a Valiant Grade plastic model kit from the Legend of Star General series, inspired by the legendary Chinese warrior Lu Bu. This is the long-awaited assembly model kit version of Motor Nuclear's flagship mecha - the original MNQ-05X pre-built figure was the product that put Motor Nuclear on the international map five years ago, and the MNP-XH15 delivers that same design in a full plastic model kit format built around a pre-assembled zinc alloy inner frame. Motor Nuclear's Legend of Star General line reimagines Chinese historical and mythological figures as large-format, intricately detailed mecha, and Lu Bu - historically regarded as the most fearsome warrior of the Three Kingdoms era - serves as the series' centerpiece. Key Features Pre-Assembled Zinc Alloy Inner Frame: A full metal skeleton arrives pre-assembled in separate packaging, providing weight, rigidity, and stable posing support for the finished build's 25.5 cm height and broad shoulder span. 738 Parts Across 45 Runners: One of the highest part counts in the Legend of Star General lineup, with gold pre-painted parts, metallic dark gray parts with a subtle purple tone, glossy black parts, bright silver accents, and a large proportion of transparent red components backed with silver paint for layered depth. Four Primary Weapons with Modular Combination System: Includes the Fang Tian Hua Ji halberd, two distinct bows (Xing Yun Shooting Bow and Fang Yun She Gong), and a Ji Yun Sword. Weapons interconnect via dedicated connector units into additional configurations including the Po Tian Zhua claw gauntlet, a cape/cloak silhouette, a shield form, and a composite large bow. Fully Articulated Head Plumes: Each of the two plumes consists of 20 segmented parts threaded onto a rubber-coated flexible wire core, allowing virtually any curve or pose. Multi-Segment Skirt Armor with Mechanical Articulation: Front and rear skirt armor panels feature multi-section hinge systems for dynamic posing. Side skirts extend downward to increase leg clearance, and rear skirt panels mechanically spread outward when pushed at the upper tips. Horse-Riding Articulation Built In: Hip joints include lateral bend and a drop-down extension specifically designed for compatibility with the upcoming Red Hare (Chi Yan Huo Long Ju) mecha mount, with forearm rotation cuts for weapon versatility in mounted poses. Display Base with Storage Function: Includes a themed display base with built-in storage compartments and separate transparent accessory stands. Builder Context The MNP-XH15 Lu Bu is an advanced-level build suited for experienced builders comfortable with high part counts and alloy frame integration. Assembly is snap-fit with pre-colored and pre-painted parts - no cement or painting is required for a display-ready result. At 738 parts across 45 runners, the build complexity exceeds most Bandai MG kits and is comparable in density to Motor Nuclear's MNP-XH05 Zhao Yun. Builders should note that Motor Nuclear parts are known for sharp edges due to precise mold tolerances - quality side cutters and light sanding are recommended. Why Build This Kit The Motor Nuclear MNP-XH15 Lu Bu is the definitive kit in the Legend of Star General series - the brand's flagship character finally available as a full plastic model kit after five years as a pre-built figure only. At 25.5 cm with a 19.5 cm shoulder span and a full zinc alloy inner frame, Lu Bu has significantly more shelf presence and heft than any Bandai MG of comparable height, and the aggressive gold-and-dark-gray color scheme with extensive transparent red accents makes it one of the most visually striking kits in the current third-party mecha market. The modular weapon combination system - where four base weapons reconfigure into claws, capes, shields, and composite bows - provides more display variety from a single kit than most competitors offer across an entire product line. Builders already invested in the Legend of Star General series should know that Lu Bu's hip and leg articulation is specifically engineered for the upcoming Red Hare mecha mount, making this the first half of what will be Motor Nuclear's largest combined display piece. For builders new to Motor Nuclear, the MNP-XH05 Zhao Yun or the MNP-CR01 Huan Ci are more commonly recommended starting points due to their lower part counts, but experienced builders who want Motor Nuclear's most ambitious kit to date will find the MNP-XH15 Lu Bu delivers on both build complexity and finished display impact. Box Contents 45 runners (738 parts total) including gold pre-painted, metallic dark gray, glossy black, bright silver, and transparent red components Pre-assembled zinc alloy inner frame (separately packaged) Fang Tian Hua Ji halberd Xing Yun Shooting Bow with functional draw mechanism Ji Yun Sword (connects to Xing Yun Bow) Fang Yun She Gong bow with alloy center connector Weapon connector units and body-mount adapters for combination configurations Metal mechanical arm for back-mounted weapon display Interchangeable hands (10 total) Rubber-coated flexible wire for head plumes Display base with storage compartments Transparent accessory display stands Name sticker Instruction manual Specifications Brand Motor Nuclear Series Legend of Star General (Valiant Grade) Model Number MNP-XH15 Character Lu Bu Height Approx. 25.5 cm (to head) Shoulder Width Approx. 19.5 cm Materials ABS, POM, Zinc Alloy Parts Count 738 Runner Count 45 Inner Frame Pre-assembled zinc alloy Assembly Type Snap-fit plastic model kit EAN 6972147749279 Product Type Third-Party Mecha Model Kit

The Bandai PG (Perfect Grade) 1/60 MSZ-006 Zeta Gundam is a highly detailed model kit based on the titular mobile suit from the Mobile Suit Zeta Gundam television series. As the fourth release in the Perfect Grade line, this kit features a full transformation from Mobile Suit mode to Wave Rider flight mode, LED-powered lighting in five locations, and an incredible 825 parts spread across 37 runners. This is an advanced-level build recommended for experienced builders, requiring a Phillips screwdriver for assembly and offering a deeply rewarding construction experience. Piloted by Newtype Kamille Bidan in the Gryps Conflict, the MSZ-006 Zeta Gundam is one of the most iconic transformable mobile suits in the Universal Century timeline.Key Features Full Transformation: Converts between Mobile Suit mode and Wave Rider flight mode with locking mechanisms for stability in both configurations LED Illumination: Five locations light up on the completed model - camera eye, tail stabilizer, beam saber, and both wingtips Die-Cast Metal Landing Gear: Landing gear struts are crafted from die-cast metal for enhanced realism and weight Detailed Inner Frame: Full internal mechanism detail on all limbs, featuring pistons, sensor arrays, and actuators that move in sync with joints Opening Panels and Hatches: Head, chest (including cockpit), and other sections feature opening panels revealing internal detail Individually Jointed Fingers: Each finger is articulated for precise posing and weapon-holding options Metal Screw Construction: Approximately 50 locations are secured by metal screws for structural integrity Included Equipment and Accessories MSZ-006 Zeta Gundam model kit (37 runners, 825 parts) Beam rifle 2x Beam sabers (with LED light-up gimmick) Shield (FF-XV-SH-609Z) 2x Grenade launcher packs LED unit Foil sticker sheet x1 Marking seal sheet x1 Decal sheet x1 Instruction manual Transformation guide Metal screws Specifications Brand Bandai Spirits Series Mobile Suit Zeta Gundam Line Perfect Grade (PG) Kit Number #4 Scale 1/60 Model Number MSZ-006 Mobile Suit Name Zeta Gundam Pilot Kamille Bidan Completed Model Height Approximately 33cm Total Parts 825 pieces (37 runners) Bandai SKU BAS1075680 UPC 4573102642332 Product Type Model Kit Material PS/ABS Plastic, Die-Cast Metal Country of Origin Japan Release Date March 2000

ZZA 1/100 GZSS-OX REGUS Model Kit The ZZA 1/100 GZSS-OX REGUS is the second release in the GZSS series, representing the Regus Captain Unit. Designed as a high-output propulsion and heavy laser firepower platform, Regus serves as the core assault unit within the lineup, emphasizing aggressive presence and battlefield dominance. Key Features GZSS Series Release: Second entry in the GZSS model kit lineup. 1/100 Scale Assembly Kit: Large-scale mecha model with articulated structure. High-Output Combat Design: Emphasizes powerful propulsion systems and heavy laser-based weaponry. Captain Unit Configuration: Distinctive design and loadout representing the Regus command unit. Customizable Armor: Includes alternate color outer armor parts to support builder customization and DIY color selection. Weapons and Equipment M-26 Energy Storage Cannon ×1 Anti-Beam Composite Shield ×1 Standard Beam Saber ×2 High-Power Beam Saber ×2 Included Parts GZSS-OX Regus main body (1/100 scale) ×1 Alternate color outer armor parts ×1 set Specifications Brand ZZA Series GZSS Model GZSS-OX REGUS Scale 1/100 Product Type Plastic assembly model kit Armor Options Alternate color outer armor parts included Backorder Notice:This item is currently on backorder and will be shipped once available. Please be aware that cancelling a backorder will incur a 25% restocking fee. For detailed information on our backorder and cancellation policies, please visit our FAQs page.

Official Infinite Nova Retailer LA Scale Model is an authorized retailer of Infinite Nova All Infinite Nova model kits are 100% genuine and sourced directly from the manufacturer. Infinite Nova IN ERA+ 1/72 RMD Series F.N.R-09 Fenrir Model Kit The IN ERA+ 1/72 RMD Series F.N.R-09 Fenrir is a large-scale plastic model kit from Infinite Nova's RMD (Real Minutia Designs) collaboration line. Fenrir features an aggressive heavy-frame silhouette with layered armor construction, a segmented tail-mounted blade system, and transformable weapon configurations that shift between compact and deployed states. IN ERA+ is the premium engineering sub-brand of Infinite Nova, and the RMD Series represents their mechanically dense, high-articulation product line - Fenrir is the first 1/72 scale entry in the RMD lineup. Key Features First 1/72 RMD Release: Opening entry in the RMD 1/72 plastic model line, co-developed between IN ERA+ and Real Minutia Designs for high-density mechanical engineering. 27 cm Completed Height: Significantly larger than standard 1/72 military kits, standing approximately 10.63 inches tall with dominant shelf presence. Segmented Internal Frame: Core body uses independently moving upper torso, waist, and hip sections with pre-assembled core joints, supporting wide posing angles while maintaining structural stability. Tail-Mounted Blade System: Articulated multi-segment tail weapon with directional movement and multiple display angles, functioning as both a visual anchor and a melee weapon platform. Transformable Weapons: Main blade and rifle systems feature expandable elements designed to shift between compact storage and deployed combat states. Layered Armor Construction: Multi-layer armor panels with stepped depth, extensive panel lines, vents, and mechanical surface detailing molded directly into parts. Linked Shoulder Articulation: Multiple synchronized joints in the shoulder block allow coordinated movement between shoulder armor and arm rotation, reducing visual gaps during posing. Builder Context The Fenrir is an intermediate-to-advanced build with ABS plastic construction and pre-assembled core joints. Assembly requires nippers and basic modeling tools. The dense layered armor design and articulated internal frame provide a build experience comparable to premium 1/100 scale third-party mecha kits, compressed into a 1/72 footprint. Builders familiar with MG-grade Bandai kits or other IN ERA+ RMD releases like the Thunderbolt will find the engineering approach and part density familiar. Why Build This Kit The Infinite Nova IN ERA+ F.N.R-09 Fenrir is the first 1/72 scale kit in the RMD lineup, and at 27 cm it towers over standard 1/72 military models - its physical presence on a shelf is closer to what most builders expect from 1/100 scale kits. The segmented tail blade system and transformable weapons give the Fenrir a distinctive silhouette that sets it apart from other IN ERA+ releases like the Thunderbolt or Lizard, which focus on more conventional humanoid proportions. Builders coming from Bandai MG kits will find a comparable level of internal frame engineering and part density, but with an original mecha design and heavier armor layering than most Bandai offerings at a similar price point. The pre-assembled core joints lower the barrier to entry for builders who want mechanical complexity without the risk of fragile joint assembly, making Fenrir a reasonable starting point for the 1/72 RMD line. Builders should note that ABS construction throughout means cement is not recommended - standard snap-fit techniques apply, but sanding and cleanup benefit from ABS-appropriate tools. The third-party mecha community widely regards the Fenrir alongside kits like the Infinite Dimension RT-002 Nemesis, Motor Nuclear MNQ03-B Zhao Yun, and Einta Industries Sky Defender as a benchmark for engineering quality and presentation in original design model kits - reinforcing Infinite Nova's position as one of the highest-tier producers in the category. Box Contents Fenrir main body parts and inner mechanical frame components Pre-assembled core joint units Tail blade assembly Transformable rifle Melee blade weapon Backpack and thruster assembly Hand option parts Display base set High-precision water decal sheet Metallic foil sticker sheet 3D sticker sheet Base postcard Assembly instruction manual Specifications Brand Infinite Nova / IN ERA+ Series RMD (Real Minutia Designs) Model F.N.R-09 Fenrir Scale 1/72 Height Approx. 27 cm (10.63 inches) Material ABS plastic Product Type Plastic assembly model kit SKU id-fenrir

Endless Create SR-01 Shurado Series Byaki MGSD-Style Model Kit The Endless Create SR-01 Shurado Series Byaki is a compact, highly detailed mecha model kit designed in an MGSD-style format. Produced by Endless Create, this kit features super-deformed proportions combined with dense mechanical detailing, layered armor construction, and a display-focused silhouette. Based on preview materials and retailer listings, Byaki emphasizes sharp panel separation, angular armor geometry, and a stylized heroic profile. The design prioritizes visual impact while maintaining a manageable build size compared to full 1/100 releases. Key Features MGSD-Style Design: Super-deformed proportions combined with high mechanical detail density. Original Mecha Design: Not affiliated with Bandai or any Gundam intellectual property. Layered Armor Construction: Multi-panel armor layout with stepped surface depth. High Surface Detail: Panel lines and mechanical features molded directly into parts. Display-Oriented Proportions: Designed for shelf presence and posed presentation. Visible Equipment Byaki main body components Integrated armor-mounted mechanical details Stylized weapon and accessory components as shown in preview materials Specifications Brand Endless Create Series Shurado Series Model SR-01 Byaki Scale / Format MGSD-style (non-scale) Product Type Plastic assembly model kit IP Affiliation Original design (Third Party)

Official Motor Nuclear Retailer LA Scale Model is an authorized retailer of Motor Nuclear. All Motor Nuclear model kits are 100% genuine and sourced directly from the manufacturer. Motor Nuclear Legend of Star General MNPQ-XH04 Gan Jiang SD Version Model Kit Motor Nuclear MNP-CR01 Blazing Stars Yuheng Star 6th Leader Advanced Type Huan Ci Model Kit The Motor Nuclear MNP-CR01 Blazing Stars Yuheng Star 6th Leader Advanced Type Huan Ci is a large-scale original mecha model kit from Motor Nuclear’s Blazing Stars series. Designed as a high-ranking leader unit, Huan Ci features an expansive full-equipment configuration, multi-system weapon loadout, and modular transformation-oriented engineering. Key Features Large Full-Equipment Scale: Fully equipped configuration reaches approximately 35 cm in height and 52 cm in overall length, excluding the display base. Dual-Form Design: The mecha supports two primary configurations, expanding its play and display options. Five Independent Weapon Systems: Equipped with a wide array of weapons, forming a comprehensive combat loadout. Modular Flight Assembly: Cockpit unit, thrusters, and weapon systems can be reconfigured and combined to form a flight-mode craft. Streamlined Mechanical Aesthetics: The entire design emphasizes flowing, aerodynamic lines suited for futuristic space combat. Storage-Integrated Display Base: Includes the updated Blazing Stars “Red Heat Five-Star” base with built-in storage for hand parts and accessories. X Expansion Compatibility: First Blazing Stars unit to include a Motor Nuclear X-series expansion component. X Expansion Component X-01 High-Mobility Foot Propulsion Unit Included Equipment and Components Huan Ci main mecha body components Five independent weapon system assemblies Detachable cockpit unit Thruster and propulsion components Red Heat Five-Star display base with storage functionality X-01 high-mobility foot propulsion unit Instruction manual Specifications Brand Motor Nuclear Series Blazing Stars Model MNP-CR01 Yuheng Star No.6 – Huan Ci (Leader Advanced Type) Primary Height Approx. 22 cm (main body only) Full Equipment Height Approx. 35 cm (excluding base) Full Equipment Length Approx. 52 cm Configuration Dual-form with modular flight assembly Product Type Plastic assembly model kit IP Original third-party mecha design

Robox Animation RB-P-02 Cantonese Heavy Utility Vehicles Guangdong Cockroach Model Kit The Robox Animation RB-P-02 Guangdong Cockroach is a large-scale, highly articulated original mechanical creature model kit designed as a heavy-duty utility and assault platform. Inspired by industrial machinery and insect-based biomechanics, this kit features a multi-segmented body structure, oversized armor shells, and extensive mechanical detailing throughout the internal and external assemblies. Key Features Oversized Mechanical Insect Design: Cockroach-inspired silhouette with reinforced armor plating and articulated limbs. Large Finished Size: Assembled length exceeds approximately 14 inches, creating a strong visual presence. Multi-Joint Articulation: Segmented legs, body sections, and appendages allow for crawling, climbing, and attack poses. Modular Armor Construction: Layered shell components reveal internal mechanical structures. Transformable Components: Rear shell and body segments support expanded and combat-ready configurations. Industrial Aesthetic: Heavy machinery styling combined with bio-mechanical detailing. Mechanical Systems and Effects LED Lighting Unit: Integrated LED system for the core and sensor areas. Rotating Head Assembly: Head unit supports directional posing and attack orientation. Expandable Wing and Shell Mechanisms: Armor panels deploy to simulate combat and movement states. Rear Exhaust and Thruster Details: Mechanical exhaust structures integrated into the back assembly. Accessories and Included Parts Main cockroach mechanical body components Multi-segment articulated legs Expandable armor shell parts LED lighting unit Internal mechanical frame components Effect and detail parts Instruction manual Specifications Brand Robox Animation Model RB-P-02 Guangdong Cockroach Product Line Cantonese Heavy Utility Vehicles Scale Non-scale Material ABS plastic Lighting LED unit included Assembly Type Plastic model kit

KOSMOS LED Light Set for MG 1/100 Gundam Vidar The KOSMOS LED Light Set for MG 1/100 Gundam Vidar is a third-party LED upgrade kit designed specifically for the Bandai MG 1/100 ASW-G-XX Gundam Vidar from Mobile Suit Gundam: Iron-Blooded Orphans. This light set adds multi-point illumination to the MG Vidar, enhancing its display presence with integrated LED modules. The set includes only the LED lighting components — the MG Gundam Vidar model kit and display stand are sold separately. Key Features Designed for MG Vidar: Custom-fit LED modules engineered specifically for the Bandai MG 1/100 ASW-G-XX Gundam Vidar kit. LED Upgrade Only: This product contains only the LED light set. The MG Gundam Vidar model kit, display stand, and any other items shown in promotional images are not included. KOSMOS Brand Quality: Produced by KOSMOS, a third-party manufacturer specializing in LED lighting systems for Gundam and mecha model kits. Box Contents KOSMOS LED light set modules for MG 1/100 Gundam Vidar Installation instructions Specifications Brand KOSMOS Product Type LED Light Set (aftermarket upgrade) Compatibility Bandai MG 1/100 ASW-G-XX Gundam Vidar Scale 1/100 Materials ABS, POM, PVC Series Mobile Suit Gundam: Iron-Blooded Orphans Model Kit Included No — LED light set only Preorder Notice: This item is currently on Preorder and will be shipped once available. Please be aware that cancelling a Preorder will incur a 25% restocking fee. For detailed information on our preorder and cancellation policies, please visit our FAQs page.

Official Infinite Dimension RetailerLA Scale Model is an authorized retailer of Infinite Dimension and Animester. All Infinite Dimension and Animester model kits are 100% genuine and sourced directly from the manufacturer. Honor of Kings Kai Crimson Sky Battle Armor Model Kit The Honor of Kings Kai — Crimson Sky Armor is a posable plastic assembly model kit based on the character Kai from the mobile game Honor of Kings, produced by Animester - Nuclear Gold Reconstruction with bionic skeleton joint design by Infinite Dimension. The frame features a precise bionic design with a wealth of linkage structures. It not only boasts vivid textures sculpted along the muscle groups, but also includes delicate detailing on the arms and wing frames, further enhancing its portrayal as a mechanical life form. Key Features Bionic Skeleton Joint Design by Infinite Dimension: The frame features a precise bionic design with vivid muscle-group textures, delicate arm and wing frame detailing, and a wealth of linkage structures that enhance its portrayal as a mechanical life form. Multi-Layer Bionic Neck Structure: The neck features a multi-layer bionic structure, enabling flexible rotation at a wider angle. Every head turn drives the muscle panels on both sides to rise, fall, stretch, and contract in sync. Core Torso Articulation: The waist and abdomen support left-right bending and forward tilting. Each twist accurately reproduces the core dynamics of the human torso. Dynamic Thigh Linkage: The moment the thigh is lifted outward, the inner muscle panels bulge accordingly, as if a pulsing power lies beneath the cold mechanical armor. Independent Wing Articulation: The giant battle wings' connection points use a new independent linkage structure, and each feather wing's movement is independently custom-designed. Anti-Detachment Joint Design: Ankle joints and upper thigh root joints both use anti-detachment structures. They hold firm when standing still and remain securely locked during wide-range posing, keeping every step and turn clean and precise. Clearance Engineering for Extreme Poses: The rear foot armor and the rear underside of the shoulder armor feature clearance structures that work with the full-body bionic joint rhythm, leaving more room for extreme poses. First Press Bonus: Initial production includes one clear outer armor parts set. Included Contents Kai ×1 Base ×1 Boomerang Blade ×1 Plasma Greatsword ×1 Megaphone ×1 Alternative hand parts ×5 sets (gripping hand, charging hand, fist hand, relaxed hand, open hand) Dedicated water slide decal ×1 Orange-yellow replacement runner for head parts ×1 Specifications Item 「Kai — Crimson Sky Armor」Plastic Kit Brand Animester - Nuclear Gold Reconstruction Joint Design Infinite Dimension Series Title Honor of Kings Main Body Height Approx. 225mm Wingspan Height Approx. 236mm Materials ABS, PC, PVC, POM Product Type Plastic assembly model kit (posable) Estimated Release Q3 2026 Preorder Notice:This item is currently on preorder and will be shipped once available. Please be aware that cancelling a preorder will incur a 25% restocking fee. For detailed information on our preorder and cancellation policies, please visit our FAQs page.

Official Motor Nuclear Retailer LA Scale Model is an authorized retailer of Motor Nuclear. All Motor Nuclear model kits are 100% genuine and sourced directly from the manufacturer. Overview The Motor Nuclear BV-XH01 Xiang Yu is a plastic assembly model kit from Motor Nuclear's Valiant Grade (Xunyong / BV) line, part of the Legend of Star General series. Designated as the Lian Zhen Star Lord of Yu Heng Palace, Xiang Yu is inspired by the historical Hegemon-King of Western Chu and reimagined as an original mecha design featuring an aggressive silhouette with phoenix feather-inspired shoulder armor, bird-head motifs on the front skirt and ankle guards, and integrated clear parts throughout the structure. The Valiant Grade line represents Motor Nuclear's compact, budget-friendly entry tier - smaller in scale and part count than the flagship MNP kits, while retaining the brand's mechanical design language and articulation focus. Key Features Valiant Grade (BV) Line: Motor Nuclear's compact kit tier, delivering the brand's signature mecha aesthetics and articulation at a smaller size and lower price point than the standard MNP series. 14 Runners with Pre-Painted Details: Includes pre-painted gold runners and metallic green painted eye parts for display-ready color accuracy straight from the box. Integrated Clear Parts: Transparent components built into the frame accentuate internal mechanical detail and add visual depth to the finished build. POM Joint Components: Dedicated black POM runner provides durable, stable connection points across the frame's articulation joints. Overlord Spear (Ba Wang Qiang): Xiang Yu's signature polearm weapon features a hybrid spearhead-halberd design rather than a simple spear tip, reflecting the character's origin as a warrior-king. Aluminum Foil Sticker Sheet: Included for shoulder armor color detail, adding metallic accents without the need for paint or aftermarket decals. Four Pairs of Interchangeable Hands: Fists, relaxed hands, gripping hands, and angled gripping hands provide versatile display and weapon-holding options. Builder Context The BV-XH01 Xiang Yu is an entry-level kit with simple structure and smooth assembly flow, suitable for beginners. The 14-runner part count and snap-fit construction make it a quick, satisfying build that experienced builders can finish in a single sitting. Comparable in difficulty and scale to a Bandai HG kit, with no glue or paint required for a complete appearance. Sharp design elements on the armor are chamfered for safe handling. Gate placement is mostly standard and exposed, with a small number of hidden gates. Why Build This Kit The Motor Nuclear BV-XH01 Xiang Yu is the most affordable entry point into the Legend of Star General series currently available, priced well below the standard MNP-line kits like Bai Qi ($75+) or Zhao Yun ($160+) while still carrying Motor Nuclear's original mecha design identity. At 15.5 cm, Xiang Yu falls between 1/144 and 1/100 Gundam scale in height and sits comfortably alongside HG or small MG kits on a shelf, but offers a Chinese mythology-inspired aesthetic - complete with phoenix feather shoulder details and bird-head armor motifs - that is visually distinct from anything in the Gundam catalog. The 14-runner build with pre-painted gold and metallic green parts delivers a display-ready result without painting, making it a practical introduction to the Motor Nuclear brand for builders who do not want to commit to the larger, heavier, multi-session MNP kits. Unlike the SP-XH01 alloy action figure version of Xiang Yu, the BV plastic model kit does not include the greatsword or display base - it ships with the Overlord Spear as the sole weapon, though the stand connector is compatible with the SP version's base. Builders who enjoy the BV-XH01 can scale up to the MNP line with confidence that Motor Nuclear's engineering conventions and design language will carry over. Box Contents 14 runners (including pre-painted gold runners and black POM joint runner) Pre-painted metallic green eye parts Clear parts Overlord Spear (Ba Wang Qiang) weapon Four pairs of interchangeable hands (fists, relaxed hands, gripping hands, angled gripping hands) Aluminum foil sticker sheet (shoulder armor detail) Instruction manual Specifications Brand Motor Nuclear Series Legend of Star General Line Valiant Grade (Xunyong / BV) Model Number BV-XH01 Character Xiang Yu - Hegemon-King of Western Chu Character Designation Lian Zhen Star Lord of Yu Heng Palace Height Approx. 15.5 cm (6.1 in) Runner Count 14 Material ABS, POM Product Type Plastic assembly model kit (snap-fit) IP Original third-party mecha design Country of Origin China JAN 6972147749484 Preorder Notice: This item is currently on preorder and will be shipped once available. Please be aware that cancelling a preorder will incur a 25% restocking fee. For detailed information on our preorder and cancellation policies, please visit our FAQs page.

Hemoxian 1/10 Over Zero UTX-6030 Tastier Model Kit The Hemoxian 1/10 Over Zero UTX-6030 Tastier is a third-party mecha model kit depicting the military cyborg "Tastier" from the original Over Zero universe. Unlike traditional mecha kits, Tastier is designed as a biomechanical power-armor unit with TPE soft-rubber musculature that deforms naturally during posing - simulating hydraulic pistons, spinal flexion, and muscle contraction across the arms, legs, and torso. Hemoxian (also known as NonZero Studio) is a Chinese manufacturer known for integrating functional mechanical gimmicks into snap-fit model kits, and Tastier is the flagship product of their Over Zero original IP line. Key Features TPE Biomimetic Muscle System: Red soft-rubber components across the neck, arms, spine, and legs compress and deform when joints are articulated, simulating functional power cables and musculature. Hydraulic Piston Linkage: Four hydraulic rods in the waist produce mechanical linkage movement during torso rotation, lateral bending, and forward/backward lean. Ankle pistons extend and retract during foot articulation. LED Eye Unit: Built-in LED module with rear-mounted switch illuminates eight interchangeable compound-eye sticker designs. Requires one CR927 3V button cell battery. Modular Mechanical Dog: General-purpose support mecha that functions as a standalone articulated unit, separates into an electromagnetic cannon (hand weapon) and a jet-propulsion backpack that mounts to Tastier's back. Composite Maintenance Base: Display stand with integrated weapon storage featuring dedicated slots for each accessory, diecast flexible snake-bone support arm, and a rotatable weapon-rack display mode. First-Batch Bonus Cloak: Cloth cloak with embedded internal wire for custom shaping and tattered-edge detailing at the hem. Partially Pre-Painted: Silver armor accents and select details are pre-painted. Color-separated plastic molding achieves accurate color layout without painting. Builder Context Tastier is an intermediate-level snap-fit kit that requires no cement or painting for a complete build, though nippers and basic cleanup tools are recommended. Assembly fitment runs slightly tight, and some force is needed during construction. The TPE rubber components and locking clip joints give the finished model a tactile, toy-like solidity that is unusual for a model kit - experienced builders often compare the handling feel to a finished action figure rather than a typical plastic kit. Builders familiar with MG-grade Bandai kits will find the articulation engineering comparable, with the biomimetic muscle system offering a build experience unlike anything in the Gundam ecosystem. Why Build This Kit The Hemoxian UTX-6030 Tastier is the recommended entry point into the Over Zero series due to its complete accessory package - the full set includes the main figure, mechanical dog, and maintenance base, making it the most value-dense offering in Hemoxian's current lineup. The TPE biomimetic muscle system sets Tastier apart from every other third-party mecha kit on the market; no Bandai kit at any grade currently replicates the functional piston-and-muscle deformation gimmick that Tastier uses across its entire body. At 19.5 cm with the mechanical dog and maintenance base included, Tastier offers more display volume and play options than most kits at double its price point. Builders who are comfortable with RG or MG Bandai kits but want something outside the Gundam universe will find Tastier's build complexity and joint engineering familiar, while the power-armor aesthetic and weapon-swapping modularity provide a distinctly different shelf presence. The one known build issue across reviews is that small gray leg-guard attachments can be difficult to fit as shown in the manual - test-fitting before committing is recommended. Box Contents Tastier main figure components (partially pre-painted) General-purpose mechanical dog (partially pre-painted) Composite maintenance base Diecast flexible snake-bone support arm Rifles x2 Pistols x2 (with functioning slide mechanism) Daggers x4 Light blade effect parts (forearm-mounted) Weapon firing effect parts (pistol, rifle, and electromagnetic cannon) Blade swing particle effect part LED eye unit (requires CR927 3V battery) Metal etching sheets x2 Water-slide decal sheets x3 Metal hose First-batch bonus cloth cloak (wire-embedded) Cityscape photo backdrop card Instruction manual Brand Hemoxian (NonZero Studio) Series Over Zero Model UTX-6030 Tastier Scale 1/10 Height (Tastier) Approx. 19.5 cm (7.67 in) Height (Mechanical Dog) Approx. 8.0 cm Height (Maintenance Base) Approx. 3.5 cm Materials ABS, PS, TPE, stainless steel, steel, cotton, PU Assembly Snap-fit (no cement required) Battery CR927 3V button cell (check packaging for inclusion) Release Year 2024 Backorder Notice:This item is currently on backorder and will be shipped once available. Please be aware that cancelling a backorder will incur a 25% restocking fee. For detailed information on our backorder and cancellation policies, please visit our FAQs page.