Gundam Gunpla

The GNT-0000 00 Qan[T] (aka 00Q, 00 Qan[T], pronounced "Double-Oh Quanta") is the successor to the GN-0000+GNR-010 00 Raiser in Mobile Suit Gundam 00 The Movie: Awakening of the Trailblazer. It is piloted by Setsuna F. Seiei.A fifth Generation Gundam designed and tuned specifically for Celestial Being's first Innovator, Gundam Meister Setsuna F. Seiei, 00 Qan[T] is the latest mobile suit (MS) designed by Celestial Being. Its blueprints originated from an Innovators draft and were sent over from Veda/Tieria (with level 7 clearance) for Celestial Being engineers to analyze and develop. As the successor to GN-0000+GNR-010 00 Raiser, 00 Qan[T] contains an upgraded and improved Twin Drive System and possesses the new Quantum System. Whereas Zabanya and Harute were developed using parts from their predecessors, 00 Qan[T]'s was made as a new mobile suit. The development resources and focus used on 00 Qan[T] are of a higher level than the other two.The unit possesses two newly created GN Drives specifically made for its Twin Drive System. The drives are located on its back and underneath the shield respectively and were developed by a team led by Linda Vashti at Jupiter. As these newly made solar furnaces are developed with perfect synchronization in mind, no external help with stabilization is required, thus 00 Qan[T] does not need a support unit such as 0 Raiser like 00 Gundam did. They can also be directly connected with each other which would result in a higher sync rate and output, however, when used this way they become extremely hard to control. To prevent unexpected problems, they are usually kept separate.The Quantum System is also the successor to 00 Raiser's Trans-Am Burst System, which allows Setsuna to expand his quantum brainwaves. It creates a massive quantum field that extends an Innovator's consciousness to communicate with sentient minds for advanced communications. To activate the system, the Innovator pilot's quantum brainwaves must be active. Once scanned, the two GN Drives connect. Finally, large portions of Qan[T]'s armor is purged, and the condensers within the limbs and the GN Drive core extend beyond the frame of the suit.Like its predecessors (the Exia and 00), 00 Qan[T] is a close combat-oriented mobile suit. Its primary weapon is the GN Sword V, the latest in the line of dual-functioning weapons that can alternate between sword and rifle modes. A GN Shield is mounted over the left shoulder in a similar fashion to one of the GN-0000 00 Gundam's GN Drives. The shield itself can deploy 6 GN Sword Bits (stored on the sides of the shield) which serve many functions but are primarily remote blades. The Sword Bits can be attached to the GN Sword V to form either a powerful buster sword or a buster rifle for combat. For added defense, 00 Qan[T] can deploy a GN Field by placing the 6 Sword Bits in a closed spherical formation and can activate the Trans-Am System to enhance its overall capabilities.00 Qan[T] can quantize like 00 Raiser, but with improvements over the original, it is now able to execute this function at will. Unlike 00 Raiser, 00 Qan[T] is capable of quantizing not only for short distances, but all the way across the universe, which was shown when it teleported to the ELS homeworld on the far side of another galaxy. 00 Qan[T]'s Sword Bits have the ability to form a portal and aid in the process. This similar function is also present in GNW-100A Sakibure which appeared 50 years after the end of the movie.The headpiece of the 00 Qan[T] acts as a controlling device for the Sword Bits. The particle-controlling capabilities of the antennae have yet again improved, allowing the 00 Qan[T] to communicate using Quantum Brainwave interfacing. Ian Vashti has designed the head of the 00 Qan[T] to resemble Setsuna's previous Gundams, the GN-001 Gundam Exia, and the GN-0000 00 Gundam.The arm parts of the 00 Qan[T] were made to allow the 00 Qan[T] to wield it's close combat weapons to the fullest. The wrist joints were made to be so flexible that they actually could move like a human arm. The GN Condensers located within the arms have been improved, allowing GN Particles to be transferred to the weapons more smoothly and effectively than the 00 Raiser's condensers.The leg parts of the 00 Qan[T] have built-in AMBAC (Active Mass Balance Auto-Control) capabilities to allow it to achieve high maneuverability in zero-G conditions. The knee joints of the 00 Qan[T] were made to be as fluid in motion as a real human knee, with GN condensers located in them, which also improved. Some parts of the legs were developed from the GNZ series, while other parts bore massive improvements to the original parts from the 00. The remaining parts were derived from other GN Drive-equipped mobile suits.Being Celestial Being's most advanced MS to date, the 00 Qan[T] is so powerful that it could possibly have eliminated the entire ELS attack force single-handedly had Setsuna chosen not to communicate with them. However, it should be noted that this is just a hypothetical calculation by Veda. It excludes important factors such as ELS' healing abilities, and the physical impossibility of the pilot fighting without food or rest over a whole week of constant battling, making it a very difficult feat to achieve nevertheless.

The ZGMF-X42S Destiny Gundam is the titular mobile suit of Mobile Suit Gundam SEED Destiny and was piloted by Shinn Asuka. A straight-built Gunpla version is piloted by Shimon Izuna in Gundam Build Fighters Try. The ZGMF-X42S Destiny Gundam is a high performance general-purpose MS commissioned by ZAFT Chairman Gilbert Durandal, who ordered it to be incorporated with the most advanced technology of the time, including technologies banned by the Junius Treaty. Based on the ZGMF-X56S Impulse Gundam and Shinn Asuka's combat data, it is designed to handle any combat situations with a single set of varied armament, a concept first tested on the ZGMF-X56S/θ Destiny Impulse. For close combat, it has two beam boomerangs that double as beam sabers, a pair of palm beam cannons, and a large beam sword. For ranged battle, it is equipped with a long-range beam cannon and a beam rifle. For defense, it mounts a small physical shield as well as two beam shield generators. Lastly, the suit has a standard set of CIWS.For the Destiny Gundam to use its variety of weapons effectively and quickly, it needs to have a wider range of body movements as well as be more flexible. To achieve a wider range of body movements, the suit's basic structural components are split into smaller, movable pieces, while its armor is divided into smaller pieces in a manner similar to that of the ZGMF-X20A Strike Freedom Gundam's. The exposed gaps in the armor due to smaller armor pieces are remedied by mapping out the ranges of motion of the frame using Shinn's combat performance to determine the most efficient way to separate the armor parts. This ensures the wider range of body movements do not compromise defensive power. To be more flexible, the Destiny's joints are constructed of the same materials found in Phase Shift armor. This allows the joints to possess near-human flexibility when phase-shifted and a faint metallic glow is produced when discharging excess residual energy within the body through the joints. Through these measures, the suit met its requirements, however, various problems remain to be solved, including maintenance problems and production issues.Other special aspects are the Destiny's use of the new Voiture Lumiere propulsion system and the use of Mirage Colloid to create illusionary copies of itself. Destiny's Voiture Lumiere propulsion system is installed in the wings, which are improved version of the ZGMF-X10A Freedom Gundam's wings, and will produce a special light effect known as Wings of Light during high speed movements. The Voiture Lumiere propulsion system is frequently used alongside the Mirage Colloid to confuse the enemy as the real Destiny sets up for a high-speed attack. Like the ZGMF-X666S Legend Gundam, the Destiny Gundam is powered by the Hyper-Deuterion Engine and armored with Variable Phase Shift armor. Although classified as a "Second Stage Series" mobile suit, as indicated by the "S" in its model code, the Destiny should be a "Third Stage Series" instead based on its performance. This is done to hide the fact that it is a nuclear-powered suit and should have an "A" instead.

AMX-004 Qubeley (キュベレイ Kyuberei?) is a mobile suit that appears in Mobile Suit Zeta Gundam and Mobile Suit Gundam ZZ. It is piloted by Haman Karn. The Qubeley is a next generation mobile suit designed for Newtypes that features numerous technological innovations which allow it to fight on par with other advanced mobile suits that appeared during the Gryps Conflict and the First Neo Zeon War. Developed from the data gathered from the MS-09R4 Psycommu Rick Dom "Schnee Weiss" and the AMX-001 Prototype Qubeley, the Qubeley featured four independently movable shoulder binders, two binders per shoulder, to assist in AMBAC (Active Mass Balance Auto Control), granting phenomenal mobility. Though lacking the full range of motion as the arms and legs, these binders bring the Qubeley's total number of movable limbs up to eight. Furthermore, these binders also contain the Qubeley's primary thrusters.The most notable feature of the Qubeley is that it is the first combat mobile suit to be equipped with a mobile suit-sized psycommu system, which is used to control the new remote controlled weaponry known as "Funnels". The prototype featured a similar system, but its psycommu had not been fully miniaturized and the Funnels were stored in its main body, leaving the prototype with a large body that stood 25 meters tall. The system aboard the Qubeley had been perfected and its ten Funnels were stored in a container located in its rear armor, allowing for quicker deployment and recall. The Qubeley lacks the mega particle cannons of the prototype version, replacing them with a pair of dual-purpose beam guns that can double as beam sabers for close combat. Lastly, the Qubeley is one of the first Zeon mobile suits to use a dual-type optical sensor instead of the traditional mono-eye.

The RX-77-2 Guncannon was a mobile suit used by the Earth Federation Forces introduced in the TV anime Mobile Suit Gundam. A middle-range support mobile suit developed simultaneously with the RX-78 Gundam and the RX-75 Guntank as part of Operation V, the Guncannon adopted the same Core Block System as the other two units. Due to its role as an artillery support unit, the Guncannon's design prioritized durability over mobility, and it was not equipped with any melee weapons. However, its armor was particularly heavy, capable of surviving a direct hit from an MS-09R Rick Dom's giant bazooka.Similar to the Guntank, the Guncannon's main weapons were a pair of shell-firing cannons, chosen for their reliability over beam weapons. These cannons could be optionally swapped out for a pair of spray missile launchers. Unlike the Guntank, however, the Guncannon's generator output allowed it to equip a beam rifle. It was also equipped with a pair of head-mounted Vulcan guns and hand grenades for attacking enemy strongholds.Though its head design appeared to be simpler than the Gundam's head, the Guncannon's sensor system was in fact more complicated than the Gundam's due to its need to engage in artillery warfare. This "twin eyes with goggles" sensor design were later inherited by the RGM-79 GM. While the Guncannon's mobility was adversely affected by its weight, it was still comparable to that of the Zeon's MS-06 Zaku II. Furthermore, the backpack thrusters have sufficient thrust to enable jumping maneuvers under gravity for a short period of time.

The GN-0000+GNR-010 00 Raiser (aka 00 Raiser) is the combined form of GN-0000 00 Gundam and GNR-010 0 Raiser in season 2 of Mobile Suit Gundam 00. Setsuna F. Seiei pilots the 00 Gundam and Saji Crossroad pilots the 0 Raiser, however, when combined Setsuna can operate both units himself. Despite its power, the GN-0000 00 Gundam is a highly experimental unit that suffers from power instability issues and so requires constant maintenance and fine-tuning. The Twin Drive System was also a very new technology, requiring the external stabilizing equipment on 00's main support unit, the GNR-010 0 Raiser, to safely execute Trans-Am and fully synchronize the GN Drives. Some data from GN-XXX+GNR-000 Sefer Rasiel was also exploited in its development.When combining is needed, laser guidance sensors would mutually lock onto each other, with a Haro auto-configuring the docking sequence. 0 Raiser's binders detach from the 0 Raiser body and latch onto 00's GN Drives, and its main body combines with the 00 Gundam's backpack, resulting in an angelic-like form. After successful docking, 00 Gundam's system screen(s) reflect the changes to the frame and the Twin Drive's stabilization. Each of 0 Raiser's binders can be mounted with a GN Shield to increase it's defensive capabilities, this form can remain the same even when docked onto 00 Gundam's GN Drive housing units. Without the GN Shields attached, the binders also act as shields themselves, capable of blocking beam shots from GNZ-003 Gadessa's GN Mega Launcher in Trans-Am mode.As the 00 Raiser the Twin Drive reaches 100% synchronization rate, it can achieve GN Particle generation rates far exceeding 300% during Trans-Am(700% during the first dock), and also gains the usage of the Raiser System. These feats allow 00 Raiser to fully harness its massive particle production (too much for the 00's frame to properly handle alone) and perform at peak capacity. While in Trans-Am, 00 Raiser has also been seen utilizing quantum teleportation in a few battles although the specific activation and control mechanism has not been elaborated upon.The Raiser System allows the 00 Raiser to execute powerful attacks such as a massive GN Beam Saber dubbed the "Raiser Sword", allowing for greater close combat abilities, and using Trans-Am mode with even greater power and duration. Originally requiring both of its GN Swords working with the 0 Raiser's binders to produce and control the Raiser Sword, the 00 was later equipped with a GN Sword III. This weapon was capable of harnessing the power of the Raiser System to generate a refined, more controllable version of the Raiser Sword.The power of 00 Raiser is further enhanced with the presence of an Innovator pilot. Once such a being is detected the Twin Drive can execute Trans-Am Burst, a massive flood of purified GN Particles across a massive area. With the Twin Drive's full abilities in constant demand to combat the A-Laws and Innovators, 00 Raiser became the mainstay unit to effectively combat opposing MS. Overall, 00 Raiser is a mobile suit that exceeds the performance of all others, surpassing the very concept of "Gundam".

The RX-0 Unicorn Gundam 03 Phenex[1] (aka Phenex) is a mobile suit introduced in Mobile Suit Gundam UC: One of Seventy Two. It also appears in the manga Mobile Suit Gundam U.C. 0096: Last Sun and the Mobile Suit Gundam Unicorn novel. It makes its animated debut in the movie Mobile Suit Gundam Narrative, which succeeds the events of the Mobile Suit Gundam Unicorn OVA, and is piloted by Rita Bernal. The RX-0 Unicorn Gundam 03 Phenex was a new machine secretly built under the direction of a EFSF official who disapproved of the Vist Foundation's involvement in the UC Project. Using a psycho-frame body delivered in advance, it was assembled independently by the Earth Federation Forces and reflects the data of Units 1 and 2. Rather than that of a Unicorn, the Phenex's motif is that of a phoenix, illustrated with a much more elaborate horn/V-fin and a golden body.

The MS-07B Gouf is a mass production close-quarters combat ground mobile suit. It was first featured in the anime Mobile Suit Gundam. The MS-07B Gouf is designed specifically for Earth-based, close-quarter MS combat. It featured much-improved mobility with a powerful backpack and leg-mounted thrusters for jet-assisted jumps based on the YMS-08A High Mobility Test Type. For armaments, it has the 5-barrel 75mm machine gun in its left hand and a heat rod, which could be used as a superheated slicing weapon or as a grappling weapon with a powerful electric shock effect. It also had a powerful heat sword stored within a shield, and could also use the standard Zaku II weapons, such as the 120mm machine gun or the 280mm bazooka.The Gouf outclassed the MS-06 Zaku II in terms of speed, power output, and melee combat ability, but its overall performance was not great enough to be justified by its increased cost. The Gouf's production was cut short by the development of a more cost efficient unit, the more powerful and nimble MS-09B Dom. Despite its very short production run, several variations were produced in limited numbers and it was still deployed across the world alongside Zakus and Doms. One customized unit was piloted by Visch Donahue, which had the original 5-fingered machine gun left hand replaced by a normal manipulator hand, in its place a 3-barrel 35mm machine gun was mounted on the left forearm.

The MSΖ-006 Zeta Gundam (MSΖ-006 Ζゼータ ガンダム?) is the titular mobile suit of the Mobile Suit Zeta Gundam television series and also featured in the Mobile Suit Gundam ZZ television series. It was piloted by one of its designers, Kamille Bidan, during the Gryps Conflict [3][4], and then Judau Ashta in the First Neo Zeon War. The Zeta Gundam is a high-performance, next-generation MS constructed by Anaheim Electronics in partnership with the AEUG as part of the "Project Zeta". This project aimed to develop a transformable mobile suit capable of operating in space and on earth, but it stagnated due to problems with the strength of the movable frame. Progress was later made when Anaheim Electronics studied the movable frame of the RX-178 Gundam Mk-II units stolen by AEUG from the Titans.The main feature of the Zeta Gundam is its ability to instantly transform into a streamlined Waverider mode, which can fly at high speed in space as well as in the atmosphere. The Zeta Gundam can also function as a sub-flight system in this mode, carrying another mobile suit on its top surface. Furthermore, this mode also allows the Zeta Gundam to ride the shockwaves of atmospheric re-entry, thus it can enter the atmosphere without the use of the Ballute System, a bowl-shaped balloon parachute that protects a mobile suit from the friction heat of atmospheric entry. This atmospheric re-entry capability is thanks to the incorporation of the Flying Armor into the mobile suit's back (bottom in waverider mode), which is developed using the data of the Gundam Mk-II's FXA-00 Flying Armor.The Zeta Gundam is armored with the new lightweight Gundarium Gamma alloy, and has a variety of weaponry that includes two head-mounted vulcan guns, two beam sabers stored in the side armor that function as beam guns in Waverider mode, two forearm-mounted grenade launchers, a beam rifle with retractable barrel, and a shield. When higher firepower is required, it can use the powerful hyper mega launcher. The Zeta Gundam is also one of the first mobile suit to use the Bio-Sensor, a variant of the Psycommu system that allows a Newtype pilot to more easily interface with his mobile suit via mental commands.The Zeta Gundam is said to have received various upgrades from its initial model, such as the Initial Model + Wave Shooter, mid-model (major upgrade done in December UC 0087, most notable change being the rear skirt thrusters and addition of forearm grenade hatches) and the late model (final upgrade made in March UC 0088 consisting of Zeta Plus parts).

The RX-78GP01-Fb Gundam "Zephyranthes" Full Burnern is the upgraded space-use version of the RX-78GP01 Gundam "Zephyranthes". Introduced in the anime OVA series Mobile Suit Gundam 0083: Stardust Memory, it is piloted by Kou Uraki. The RX-78GP01 Gundam "Zephyranthes" was designed to operate in both Earth and Space by using the appropriate Core Fighter and although the space-use unit was ready, the suit was unfortunately wrecked before it could be fitted on. The damaged GP01 was recovered and the engineers of Anaheim Electronics gave it a massive overhaul while repairing it, creating the RX-78GP01-Fb Gundam "Zephyranthes" Full Burnern, which is designed for space combat. The renovation process was completed in two days, with operational testing carried out at Anaheim Electronics's Livermore factory.Its armor is more streamlined for better mobility in space, and thrusters are mounted in the chest, shoulders and legs. The air-intakes on the chest are replaced with reverse thrusters, with the covers expanding during use. The shoulder armor now contains shoulder vernier pods, and added thrusters are attached to the back of the legs and the soles. Propellant tanks are built into the shins to further extend the suit's operating time. The backpack is equipped with built-in generators and also has the most noticeable addition: the two Universal Boost Pods. The Universal Boost Pods allow the Full Burnern to have superior acceleration and mobility when compared to other units at that time. As a result, the pilot has to contend with high G-forces due to overwhelming acceleration.

The RX-93-ν2 Hi-ν Gundam (pronounced "High-New") is an alternate interpretation of the RX-93 ν Gundam which appears in Mobile Suit Gundam: Beltorchika's Children. It is piloted by Amuro Ray. Originally developed in the Anaheim Electronics facility near Von Braun, the Hi-Nu Gundam's basic design was an update of past Gundam Type mobile suits, returning to the basics of Federation-made mobile suits and going against the trend of larger and more complex mobile suit designs at the time. Its most notable feature was a set of six all-range weapons mounted on its back, known as "Fin Funnels", which were capable of both attack and defense. This made it the first full spec Newtype-use Gundam type mobile suit.The Hi-Nu Gundam also featured a Psycommu system designed by its main pilot and engineer, Amuro Ray. Originally, the system only served as the control mechanism for the Fin Funnels. However, after the Londo Bell captured a MSN-03-2 Psycho Doga used by Neo Zeon, the Psycho-Frame technology obtained from it was incorporated into the Hi-Nu Gundam, improving its responsiveness via brainwave controls.Other than the Fin Funnels, the Hi-Nu Gundam was also armed with a pair of head-mounted vulcan guns and an arsenal of custom-made weapons: a beam rifle, a new hyper bazooka, three beam sabers (one on each back-mounted funnel rack, one inside a saber rack in the left forearm), a machine gun mounted in the right forearm, and a shield with built-in ranged weaponry. The Hi-Nu Gundam was completed within three months, this was the result of the maturation of movable frame technology, the tireless effort of engineers, as well as Amuro's own deep understanding of mobile suits.

The RX-78GP03S Gundam "Stamen" (Development codename: Dendrobium Stamen) is a mobile suit that serves as the core unit for the RX-78GP03 Gundam "Dendrobium". It was first seen in Mobile Suit Gundam 0083: Stardust Memory OVA and was piloted by Kou Uraki. The RX-78GP03S Gundam Stamen is one of two components that make up the RX-78GP03 Gundam "Dendrobium", with the other being the armed base Orchis. The Stamen serves as the control unit for the Gundam "Dendrobium" and can operate on its own when required. The suit has two beam sabers, a folding shield, and a beam rifle as standard armament, and can optionally use folding bazookas. The traditional twin-head Vulcans were removed, with the freed space used to install more advanced avionics and sensor systems.The "Stamen" was designed with two cockpit options: a Core Block System, and a spherical cockpit with linear seat and panoramic monitors that gives its pilot a full view of the battlefield that was first used in the RX-78NT-1 Gundam "Alex". In the end, the spherical cockpit was selected as the default as it provided superior fire control capabilities. This is of particular importance as when the Stamen is docked with the "Orchis", it must be able to efficiently control and use the large amounts of weapons stored in the "Orchis". Another unique feature of the "Stamen" is the tail binders mounted on the sides of the waist for increased maneuverability and to dock with the Orchis. Lastly, a set of foldable manipulator arms used to retrieve weapons from the Orchis' weapon containers were concealed in the forearms of the GP03S.

The MBF-P02 Gundam Astray Red Frame is a Mobile Suit in the Gundam SEED Astray series of manga, novels, and photonovel. It is operated by Junk Guild member Lowe Guele. The MBF-P02 Gundam Astray Red Frame is one of five identical prototype mobile suits developed by Orb using stolen data from the Earth Alliance's G Project. Its original concept was to be an MS that could be piloted by Naturals, and it was eventually loaded with an incomplete Natural-use OS. Most of the technology from the G Project is successfully copied with the exception of Phase Shift armor. In its place, the Gundam Astrays' designers made the machines out of a lighter foam metal compound, with minimal armor over the frame. This made the mobile suits lighter and faster than their G Project counterparts. All five prototype Gundam Astrays are also designed with a backpack that can be lowered to the back skirt armor, allowing the mounting of additional equipment on the back.

The XXXG-01W Wing Gundam (aka Gundam Zero-One) is the titular mobile suit of the Mobile Suit Gundam Wing series. The unit was primarily piloted by Heero Yuy.Out of the five original Gundams created for Operation Meteor, Wing Gundam is the most well-balanced in terms of abilities and bears the closest resemblance to their common ancestor: the XXXG-00W0 Wing Gundam Zero. Similar to Wing Zero, the Wing Gundam can transform into an alternate flight form known as "Bird Mode" and has a powerful Buster Rifle as part of its armaments. However, the "ZERO System" interface (which had technical problems) and other parts considered to be excessive were not included, and the skills of the pilot are needed to make up for the shortfall.The major contributor to Wing's mobility is the pair of wing units on the backpack. These units not only generate lift but can also change the aerodynamic characteristics of the mobile suit through the movements of their individual panels, supporting a range of speeds from stall to hypersonic. Even in outer space, the wing units exhibit high attitude control capability using both AMBAC and built-in vernier thrusters. By transforming into Bird Mode, Wing's mobility and movement range are increased further, allowing it to conduct operations that other Gundams could not. The leg thrusters on the back of the knees serve as the main verniers in Bird Mode and are also used for dashing on the ground in MS mode.The Wing Gundam EW is Hajime Katoki's redesign of Wing created after the release of the Gundam Wing sequel OVA/movie Endless Waltz, which has been featured in the Glory of the Losers manga re-telling of the series (among other works). The redesigned Wing retains largely the same armament and abilities, but resembles Wing Zero in appearance even more than before and can be equipped with extra energy cartridges to enable the Buster Rifle to fire a maximum of nine shots instead of three.

The GAT-X370 Raider Gundam is a transformable Mobile Suit introduced in the series Mobile Suit Gundam SEED and is piloted by "Biological CPU" Clotho Buer.The Raider is a transformable mobile suit and the only second generation GAT-X machine to adopt the X300-series frame used by the GAT-X303 Aegis Gundam. Compared to the Aegis, Raider has improved anti-mobile suit capabilities when in MA mode and its transformation system is greatly simplified. It is actually a variant of the GAT-333 Raider Full Spec and maintains some of its predecessor's characteristics, like a MA mode specialized for flight and the two large fighter plane-like main wings that give it full atmospheric flight capabilities. These wings also boost Raider's turning capabilities and acceleration speed on earth and in space, as well as allow it to serve as a subflight lifter unit for carrying other mobile suits (usually the GAT-X131 Calamity Gundam). During battles, Raider often utilizes hit-and-run attacks and has Trans-Phase armor like the other second generation machines. The Raider is armed with both energy and shell-firing weapons (with some of them being usable only in flight mode) and uses the "Mjolnir" Spherical Breaker, a wire tethered mace, as its handheld weapon.

The ZGMF-X10A Freedom Gundam (aka Freedom, X10A) is a mobile suit introduced in the anime Mobile Suit Gundam SEED and piloted by Kira Yamato.One of ZAFT's ZGMF-X series of Gundam units build in C.E. 71 using technology derived from the four captured Alliance's Gundam, the Freedom Gundam has Phase Shift Armor and its armaments include CIWS guns, beam sabers, shield, plasma beam cannons, railguns, and a beam rifle. When the latter three weapons are used simultaneously, the Freedom is said to be in 'Full Burst Mode'. The suit has full flight capabilities in the atmosphere and the back-mounted wings can be deployed in "High Mobility Aerial Tactics (HiMAT) Mode" to enhance its mobility in the atmosphere or in space. It also has an advanced targeting system, the Multi Lock-On System, that allows it to target and fire at multiple enemy units simultaneously. Due to its capabilities and loadout, the suit has a reputation as a specialized 'Mobile Suit Killer', but its high performance resulted in a complicated control system that demands extremely fast reaction speed and spatial awareness from its pilot.When required, the Freedom Gundam can dock with a support unit, the METEOR unit, for heavier firepower and greater speed. The Freedom Gundam has virtually unlimited combat endurance as it is equipped with a Neutron Jammer Canceller and powered by a nuclear reactor. Kira describes the suit as having over four times the power of the GAT-X105 Strike Gundam. However, what this exactly means is unclear. The Freedom Gundam is meant to operate alongside the ZGMF-X09A Justice Gundam, and they are often based on the warship, the FFMH-Y101 Eternal, which is designed specifically to maintain them. Even in CE 73, the suit is still considered by some people, such as Shinn Asuka, as the most powerful mobile suit out there. Overall, it is one of Clyne Faction's symbols of power, along with the Eternal, the Archangel, and the Justice.

The GN-001 Gundam Exia (aka Exia, Gundam Seven Swords) is a mobile suit featured in season one of Mobile Suit Gundam 00 and is piloted by Setsuna F. Seiei.Specializing in close combat and armed mainly with melee weapons, the Gundam Exia is one of four Gundams deployed in AD 2307 by the paramilitary organization, Celestial Being, to eliminate world conflicts through armed interventions. To fight against the world with their small numbers and win, these Gundams have overwhelming power and equipped with advanced technology a century ahead of its time. Notably, the semi-perpetual GN Drive mounted in the center of the Gundams provide almost limitless energy and generates special, multifunctional GN Particles. The GN Particles grant outstanding mobility, including independent flight capabilities, and are also utilized for beam weaponry, attitude control, and stealth purposes as the discharged particles can cause electromagnetic interference, leaving conventional communication and radar devices useless. The Gundams also share common aspects with conventional mobile suits, such as the use of E-Carbon for its armor material. However, the Gundams' E-Carbon has higher defensive power due to the use of advanced materials.An example of Exia's overwhelming power is that its output was estimated to be about six times that of the SVMS-01 Union Flag, one of the newest conventional mobile suits at the time. The technical hurdles that had to be overcome to create the powerful Gundams and their GN Drives were high, making their production extremely difficult and caused the Gundams' development to occur in phases. The first generation machine, the GN-000 0 Gundam, established the basic system of a mobile suit powered by a GN Drive, and armed with a beam gun and beam saber. Subsequently, four second generation machines were developed with individual capabilities required for armed intervention, and their data served as a basis for the third generation machines, which included Exia and the other three Gundams deployed in the armed interventions. Specifically, Exia was developed from the GNY-001 Gundam Astraea, a general-purpose mobile suit with human-like movability that was used for testing various weapons, and the two machines have a number of similarities in terms of appearance.The Astraea's movability aspect is particularly appropriate for the Exia, which requires the same range of articulations as the human body due to its close combat specialization. Thus, while the Exia is armed mainly with melee weapons, its basic performance remains that of a general-purpose mobile suit. In fact, Exia is the only Gundam deployed for the armed intervention that has a body structure capable of range of articulations like the human body's, and the omission of such a structure in the other three Gundams is simply because they do not require it as their specialization is in other areas. To achieve its wide range of articulations, Exia has the most complex basic frame out of the four Gundams, its armor is also more minutely segmentalized as well. This armor design however causes some internal structures and the joints to be unprotected during certain poses, lowering Exia's defensive capability. On the other hand, this design does provides better mobility, giving Exia the best projectile evasion capability among the four Gundams.The Exia also has finer attitude control capabilities than the other Gundams, which is beneficial for close combat, and this is related to its GN Cables. The GN Cables, also known as “GN Power Lines”, are the light purple-colored cables running through various parts of the Exia's body and also one of its eye-catching visual features. While these cables are also found on other Gundams, the ones extending from the shoulders to the upper arms are unique to Exia. The cables facilitate the supply of tremendous amount of GN Particles, and thus energy, to each part of the Gundam instantaneously. They are also used for attitude control due to the GN Particles' mass reduction effect, and so, the Exia which has more cables on its exterior than the other Gundams is able to achieve finer control. In terms of defense however, such placements are dangerous, and later in GN-001REII Gundam Exia Repair II, the cables become mostly stowed in the armor.The GN Particles' mass reduction effect also lightens the Gundam, and can be used to alter the mass ratio of various body parts. Due to this latter ability, it is possible to freely control the machine's inertia and turning capabilities when in the air, and for Active Mass Balance Auto-Control (AMBAC) when in space. This also eliminates the need for the legs to "walk” when moving. As for the control of GN Particles, it is largely carried out by the two clavicle antennas on the Gundam's torso. A minor role is played by the third generation Gundams' head antenna, which is experimentally equipped with particle control functions. The head antenna also has communications and radar search functions, as well as the black box for quantum communication linkage with Veda (the Celestial Being's quantum computing system). The rest of the Gundams' humanoid head unit also contain systems responsible for controlling the entire body, much like a human's head. On a side note, the Exia's head is designed to look like the helmet of the pilot suit worn by the Gundam Meisters in AD 2307-2308 to express the belief of “Meister = Gundam”.While the GN Drive can produce GN Particles endlessly, even when the Gundams are inactive, there is a limit to the amount that could be instantaneously produced. Thus, continuous or heavy usage of beam weapons and other GN Particles consuming systems might cause the Gundams to run out of particles. To avoid this, the Gundams have GN Condensers in various body parts to store excess GN Particles. For maintenance purposes, the condensers can display the particles' compression rate and the amount stored. During mission, this display function is used for transmitting coded messages to allied units. On the matter of GN Drives, Celestial Being only created five units as that was deemed to be the minimum needed for armed interventions. The low number is not only due to difficulties in manufacturing the GN Drive, which requires Jupiter's high gravity environment, but also because having more GN Drives would increase the risk of them falling into the enemy's hands.The Gundam Exia is nicknamed “Gundam Seven Swords” as its development code was “Seven Swords”, and as indicated by this name, it is equipped with a total of seven blades to meet the needs of the moment during combat. Of these seven, the GN Sword, GN Long Blade, GN Short Blade are physical blades, while the rest are beam-based and consisted of two GN Beam Sabers and two GN Beam Daggers. The GN Sword serves as the primary weapon and due to its low energy consumption, the Exia has an advantage in prolonged combat, which mainly occurs when fighting ace pilots or when subjected to traps such as the three major bloc's joint military exercise. The three physical blades also serve as countermeasures against GN Field, a protective barrier made of GN Particles. In other words, Exia is also intended to fight against Gundam/GN Drive-equipped machine that is piloted by a betrayer or captured by the enemy and used against Celestial Being. Early on, an alternate configuration of the GN-005 Gundam Virtue also had an anti-betrayer role, but its design was dropped and this increased the responsibilities placed on Exia and its Gundam Meister.Other armaments include a GN Shield for defense that also provides protection to the internal structures and joints that might be exposed during movements. The GN Shield is usually in a compact size to maintain Exia's range of articulations, but can expand to increase the defensive area when needed. Similarly, the GN Sword, can fold its blade and has a Rifle Mode for ranged combat. The last of Exia's armament is another ranged weapon in the form of a pair of low-power GN Vulcans mounted in the forearms. During battles, the Exia gloriously sliced through its opponents in close combat, leaving a powerful impression on those who witnessed it and contributing greatly to the instillment of a "fear of Gundams" in the world. This was already anticipated by Celestial Being, and it is because of this that the organization's tactical forecaster, Sumeragi Lee Noriega, selected the Exia to intervene in the AEU-09 AEU Enact's presentation ceremony, which became the unveiling of the paramilitary organization.The Gundam Exia has an "Over Boost Mode" that temporarily boosts its GN Drive's performance and thus increase the mobile suit's capabilities. During an emergency, the Exia can activate a special "Trans-Am System" that enhances its thrust and defensive capabilities, as well as increase its output to three times that of its normal specifications for a limited period of time. This system also causes the Gundam to glow red, but it is a double-edged sword as Exia's performance will drop dramatically once it ends. A number of additional optional equipment was also developed for Exia, such as the high mobility Avalanche Unit and the GNR-001E GN Arms Type-E support machine. When equipped with the Avalanche Unit, the Exia becomes the GN-001/hs-A01 Gundam Avalanche Exia and can speed past specialized high-speed mobile suits, which it normally cannot do despite having remarkable mobility. When docked with the GN Arms Type-E, the Exia becomes the GN-001+GNR-001E GN Armor Type-E, obtaining better mobility, offensive and defensive capabilities.

The RX-0 Unicorn Gundam 02 Banshee (aka Banshee) is a mobile suit that appears in Mobile Suit Gundam Unicorn. It is built alongside its brother unit, the RX-0 Unicorn Gundam, under the Earth Federation's UC Project. Originally piloted by Marida Cruz, it was later assigned to Riddhe Marcenas.After its completion alongside the Unicorn Gundam, the Banshee was eventually stationed on Earth with the Augusta Research Lab and tested for atmospheric combat. Rather than that of a Unicorn, the Banshee's motif is that of a lion, illustrated with gold accents on the forehead, a golden collar to signify a lion's mane (the Banshee originally had the same collar as the Unicorn but this was changed after it suffered damages while battling in space), and a much more elaborate horn/V-fin.The Banshee's armor is almost entirely black, and its psycho-frame emits a golden-orange glow when the NT-D is activated. Although the Banshee lacks the Unicorn's distinctive La+ System, its performance in atmospheric combat is vastly superior, presumably because of a significant reconfiguring of the suit's operating system to account for Earth's gravity and the atmosphere's frictional resistance.Combat improvements were made according to Unicorn Gundam's battle data, which had been relayed to the Augusta Research Lab. However, the two Gundams have no major operating differences. Aside from lacking the Unicorn's La+ operating system, the Banshee's raw performance is equal to that of the Unicorn. In other words, any modification to the Banshee (i.e. atmospheric combat performance) could also be applied to the Unicorn, making both suits equal in ability.In the anime version, it weighs more than Unit 1 and has a larger effective sensor radius. Its armament also differs from that of Unit 1, as it is equipped with the added psycho-frame armaments "Armed Armor BS" and "Armed Armor VN", granting it better continuous battle capability than Unit 1, and it is said to have a higher degree of completion.

The MS-09R Rick Dom (リック・ドム Rikku Domu?) is a mass production space combat mobile suit and a variant of the MS-09 Dom. It was introduced in the TV anime Mobile Suit Gundam. Proposed by Zimmad as one of the competing designs for Zeon's next generation space-use mobile suit in the middle stage of the One Year War, the MS-09R was a variant of the ground-use MS-09 Dom. The MS-09 was chosen as the developmental base due to its good basic design. Its block structure was a major factor that enabled its specifications to be easily changed without modifications to its basic frame.The MS-09R removed the ground-use equipment of its predecessor and replaced them with space-use equipment, increasing its propellant capacity and its vernier thruster output. The thermonuclear jet engines on its feet were replaced with thermonuclear rocket engines. Its total spec, including cost and ease of manufacture, surpassed that of the MS-06R-2 Zaku II High Mobility Type, the most advanced mobile suit at the time.In addition to retaining the Dom's armaments, including its signature Giant Bazooka, some units under Dozle Zabi were said to be equipped with the experimental Beam Bazooka. Though the Rick Dom's generator output was insufficient to use beam weapons, the Beam Bazooka did not require energy from the mobile suit to be used. However, the weapon never reached mass production due to frequent explosions, though it was rumored that an improved variant of the Rick Dom capable of using the Beam Bazooka safely existed.

HGGBB ZGMF-X20A-PF Gundam Perfect Strike Freedom The ZGMF-X20A-PF Gundam Perfect Strike Freedom (ガンダムパーフェクトストライクフリーダム Gandamu Pāfekuto Sutoraiku Furīdamu?) is a Gunpla that appears in the Gundam Breaker Battlogue ONA. It first debuted in Gundam Breaker Mobile.