Master Grade 1/100 Gundam

MG models were first introduced in the summer of 1995, designed and made to higher standards than most other models. These kits take much longer to construct and are often much more expensive than their lower-grade counterparts. More recent Master Grade plastic models typically feature a movable inner frame system that enables extensive movement and bending of joints, as well as including standing and seating miniature figures of the pilots of each Gundam model.

Beginning in 2005 with the Zeta Gundam, Older MG Kits would be redesigned under the Ver.2.0 moniker with features such as a full inner frame. The RX-78-2 Gundam has had multiple MG iterations, including a Ver.1.5 that uses a mix of old and new parts, and Ver.3.0 that is modeled after the life-size statue similar to the Real Grade version of the same robot.

Though the name "Master Grade" is widely known because of Gundam, it is not Gundam exclusive as a few Master Grade offerings have come from mechas in Patlabor and Dunbine. Bandai also released a line featuring a series of character figures from Dragon Ball Z, Kamen Rider, and Tiger & Bunny under the name MG Figurerise.

In 2002, a new line of Master Grade kits subtitled "Ver. Ka" was released, which was Master Grades designed by mecha designer Hajime Katoki. Mobile suits chose to become Ver. Ka kits are chosen by annual fan votes. In 2020 a new line, Master Grade Extreme (abbreviated as MGEX) was redesigned of Master Grades that contained additional gimmicks called "Extreme Points". The first model kit of this line is the Unicorn Gundam Ver. Ka contained a LED light strip that ran across the mobile suit, compared to Individual lights that had to be wired throughout the inner frame.

  • Featured
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old
MG 1/100 RX-0 Unicorn Gundam (Ver. Ka)

MG 1/100 RX-0 Unicorn Gundam (Ver. Ka)

Bandai

$61.00

The RX-0 Unicorn Gundam (ユニコーン ガンダム Yunikōn Gandamu?, or Unicorn, Unicorn Gundam 01, Singularity One) is the titular prototype mobile suit of the Mobile Suit Gundam Unicorn novel, its OVA adaptation and the television re-cut. Developed by Anaheim Electronics for the Earth Federation, it concealed a secret that could shake the future of all humanity, for it was the key to opening Laplace's Box. It is piloted by Banagher Links after the head of the Vist Foundation and his father, Cardeas Vist, entrusted it to him at the dawn of the Third Neo Zeon War in U.C. 0096.

MG 1/100 Wing Gundam Zero Endless Waltz

MG 1/100 Wing Gundam Zero Endless Waltz

Bandai

$40.00

The XXXG-00W0 Wing Gundam Zero (ウイングガンダムゼロ EW Uingu Gandamu Zero?) (aka Wing Zero) is a mobile suit that appears in the OVA/movie Mobile Suit Gundam Wing Endless Waltz and the manga Mobile Suit Gundam Wing Endless Waltz: Glory of the Losers. Wing Zero was based on the Zero Frame technology developed by the five Gundam Scientists, which was an inner frame with all the necessary components for the mobile suit to operate, completely separate from the armor platings and energy conduits for weapons. The performance of the frame itself surpasses that of the OZ-00MS Tallgeese, and the complete separation of armor and internal structure allows Wing Zero to continue fighting after losing up to 90% of its armor.In the Glory of the Losers manga, Wing Zero is developed from the wreckage of the destroyed Wing Gundam Proto Zero, and upgraded with wing binders from the OZ-00MS Tallgeese Flugel. It combines the armament and equipment of the TV version and the EW version, such as having a shield and being able to transform into Neo-Bird Mode.

【LIMITED】MG 1/100 P-Bandai Gundam Barbatos [Recirculation Color / Neon Blue]

【LIMITED】MG 1/100 P-Bandai Gundam Barbatos [Recirculation Color / Neon Blue]

Bandai

$180.00 $85.00

GN-0000+GNR-010/XN 00 XN Raiser (aka 00 XN Raiser, pronounced Double-Oh Sun Raiser), is the combination of the GN-0000 00 Gundam and the GNR-010/XN XN Raiser. It appears in the Mobile Suit Gundam 00V side story. 00 XN Raiser carries a pair of GN Buster Sword IIIs that can combine into one large sword. The additional pair of manipulator arms on the XN Raiser allows the 00 XN Raiser to carry more weapons, as well as grant it another pair of arms for combat use. XN Raiser's binders do not dock into the 00 Gundam's twin GN Drives; instead, they fold up when the XN Raiser is docked onto the 00 Gundam. The entire system docks onto the 00 Gundam's back as a weapons backpack.

MG 1/100 Shin Musha Gundam

MG 1/100 Shin Musha Gundam

Bandai

$52.00

Shin Musha Gundam is a mobile suit which featured in Sony PlayStation's Gundam Musou video game. He is voiced by Ryuzaburo Otomo. Based on Musha Gundam, the Shin Musha Gundam differs from the original due to its elaborated armor design. Like the Musha Gundam, The Shin Musha is armed with powerful weapons including the Sankoumaru Jumonji Yari, a powerful spear that could pierce through tough mobile armor. Its default weapon includes the Nichirinmaru Katana and a Denkoumaru Naginata. In addition, the Shin Musha Gundam is also equipped with the Tanegashima gun for long ranged combat.

MG 1/100 GF13-017NJ Shining Gundam

MG 1/100 GF13-017NJ Shining Gundam

Bandai

$27.00

The GF13-017NJ Shining Gundam is a mobile fighter featured in the anime Mobile Fighter G Gundam. It was built by the nation of Neo Japan for the 13th Gundam Fight and piloted by Domon Kasshu, as well as occasionally by his crew member Rain Mikamura. The Shining Gundam was developed for the 13th Gundam Fight by Dr. Mikamura, a Neo Japan scientist. Designed with an emphasis on mobility, it has an excellent balance of offense and defense, and is equipped with the ability to faithfully reproduce the many techniques of the school of the "Undefeated of the East," performed by Domon Kasshu, the champion of colony martial arts. Since the Shining Gundam is a machine that exerts its maximum potential in close combat, there are few fixed armaments.A special feature of this machine is that the emotions and conditions of the passengers are reflected in the machine's performance. In addition, a mechanism that can power up the machine in stages has been introduced.Normal ModeThis form is the default mode of Shining Gundam. It is used when Domon is fighting another opponent without the use of the Shining Finger.Battle ModeThis is the first of Shining Gundam's high-powered modes, which allows it to employ its devastating Shining Finger attack. In this form, the Gundam's arm covers pop out, and its face armor opens for extra ventilation. This transformation briefly increases Shining Gundam's speed and offensive capabilities, but reduces its sensor effectiveness, adaptability, and defensive strength.Super ModeThe second of Shining Gundam's high-powered modes. In this form, Shining Gundam's overall performance is increased by 50%, its speed and offensive power are doubled, and the panels of its armor open up to reveal a variety of cooling systems, boosters and generators. The Super Mode is powered by the emotional energy of its pilot Domon, who at first could only attain this state when he lost control of his rage and passion. However, through the instruction of Schwarz Bruder, Domon learned to attain the serene state of mind of a true warrior, allowing him to activate the Super Mode at will.True Super ModeShining Gundam's True Super Mode is similar to the regular Super Mode, but changes Shining Gundam's colors completely gold. The overall capabilities of the unit are increased tremendously. However, this mode can only be used when Domon is in a serene state of mind (Meikyō Shisui (明鏡止水, Clear Mirror and Still Water) in the original Japanese version). Later, after Domon had replaced Shining Gundam with the God Gundam, both he and the members of the New Shuffle Alliance achieved variations of the True Super Mode called "Hyper Mode".

MG 1/100 RX-79 [G] Gundam Ground Type

MG 1/100 RX-79 [G] Gundam Ground Type

Bandai

$32.00

The RX-79[G] Gundam Ground Type is a limited production mobile suit introduced in the Mobile Suit Gundam: The 08th MS Team OVA. The Gundam Ground Type was one of the early prototypes for the Earth Federation's mobile suit mass production plan, produced in limited numbers before the recovery of the RX-78-2 Gundam's combat data. As its name suggests, it was designed solely for ground combat, and all space-use equipment, as well as the Core Block System, were omitted. This caused the Gundam Ground Type to be lighter, allowing it to rival the performance of the RX-78 while under gravity.In order to save time and cost, the RX-79[G] was constructed using surplus parts for the RX-78. Since the quality of these parts varied greatly, differences in performance became a problem, so a limiter was added in order to ensure stable performance. This limiter can be disengaged, activating a state known as "MAX mode", greatly increasing performance. However, due to the heavy burden placed on the unit, this mode can only be activated for a limited time.Compared to the RX-78, the RX-79[G] featured many design changes. The head-mounted Vulcan guns were omitted in favor of the ability to mount various optional equipment to adapt to different situations, such as extra antennae for long-range communication or a Vulcan pod for enhanced close combat ability. An extendable snorkel camera for enemy searching was mounted on the left side of the head. The beam saber racks were moved from the backpack to the legs, and were changed to an enclosed type to prevent dust from entering. A Vulcan gun and a multi-launcher were mounted on the left side of the chest. Its backpack was designed to mount various equipment, such as a weapon container for carrying various handheld weapons or a parachute pack.The Gundam Ground Type was capable of using beam rifle. However, only a small number of beam rifles were manufactured for it, and few units were equipped with it. As such, its primary ranged weapons were physical projectile weapons, such as the 100mm machine gun and the 180mm cannon. Two spare magazines for the machine gun can be mounted on the side armor on the waist.As the RX-79[G] was built out of surplus parts for the RX-78, replacements parts were very limited, and many bases were forced to perform field repairs on their units using parts from other mobile suits, creating many custom type units. One such example was the unit piloted by Karen Joshua, which had its head replaced with the head of an RGM-79[G] GM Ground Type.

MGEX 1/100 RX-0 Unicorn Gundam (Ver.Ka)

MGEX 1/100 RX-0 Unicorn Gundam (Ver.Ka)

Bandai

$272.00

The RX-0 Unicorn Gundam (ユニコーン ガンダム Yunikōn Gandamu?, or Unicorn, Unicorn Gundam 01, Singularity One) is the titular prototype mobile suit of the Mobile Suit Gundam Unicorn novel, its OVA adaptation and the television re-cut. Developed by Anaheim Electronics for the Earth Federation, it concealed a secret that could shake the future of all humanity, for it was the key to opening Laplace's Box. It is piloted by Banagher Links after the head of the Vist Foundation and his father, Cardeas Vist, entrusted it to him at the dawn of the Third Neo Zeon War in U.C. 0096.Produced as the final part of the E.F.S.F's reorganization plan, the "UC Project", the Unicorn Gundam is a revolutionary design meant to be the main symbol of the project's main goal: to destroy any traces of Zeonism in the Earth Sphere. Thus, not only does it feature a Gundam design, but it also incorporates an anti-Newtype system. Two prototype machines were completed at Anaheim Electronics' factory in Granada. However, when the Vist Foundation took control of the project, they installed a special "La+ Program" OS into the Gundam, turning it into a symbol of possibility by making it the key to finding Laplace's Box: the embodied hope of the Universal Century. Featuring the most advanced mobile suit technology of the time, its performance is unmatched.Incorporating test data from the experimental MSN-06S Sinanju Stein, the Unicorn Gundam's entire frame is built with Psycho-Frame material, drastically increasing the unit's responsiveness and allowing it to be piloted like an extension of the pilot's body. While mobile suits used during the Second Neo Zeon War implemented psycho-frame technology on a limited basis, the Unicorn is the first "full psycho-frame" mobile suit. In some cases, this responsiveness is so high that the machine appears to act on its own without any actions from the pilot. In addition, the Unicorn utilizes a special system known as the "NT-D" (or Newtype Destroyer) which activates the suit's psycho-frame and dramatically increases the suit's performance.In its normal form, the "Unicorn Mode", the Unicorn Gundam's head is similar in appearance to those of Londo Bell's mass-produced mobile suits, with the addition of a single, horn-like antenna on its forehead (which gives it the name "Unicorn"). Destroy Mode is the form when Unicorn Gundam's NT-D System is activated. The transformation is marked by an expansion of the suit's frame. The armor seams separate and lock down into various hard-points, while the newly exposed psycho-frame emits a pinkish-red or greenish (Awakened) glow (attributed to the Psycho-Field phenomenon). In this mode, the Unicorn becomes taller, reveal six more thrusters, and its head transforms to one with standard Gundam features, the visor and face guard retracts into the head to reveal the twin eyes and mouth plate, and the antenna splitting into a V-fin. To prevent its transformation being interrupted, the strength of its I-Field will be increased temporarily. Additionally, a pair of sub-sensors are revealed on the shoulders, and two concealed beam sabers extend out of the backpack.In Destroy Mode, the suit's psycho-frame scans the pilot's thoughts and directly transmits them to the suit's drive system; in other words, the Unicorn can be controlled by the pilot's thoughts alone. Additionally, the mode also causes the machine's performance - in thrust, generator output, and sensory radius - to be increased to unmeasurable levels. The NT-D also allows the Unicorn to take control of an enemy's psycommu weapons (also known as "Psycommu Jack") by emitting a Psycho-Field. However, the stress placed on the mind by manipulating an object more than tenfold the size of an average human is extraordinary. Even with the aid of the psycho-frame, the pilot's mind can only endure roughly five minutes of operation before a limiter is activated, deactivating the psycho-frame and returning the mobile suit to its Unicorn Mode.With the performance limiters disengaged, the Unicorn can accelerate up to 20 G's in Destroy Mode; to alleviate such high levels of G forces placed on the pilot, a drug administration system called the "DDS" is fitted on the pilot suit. It suppresses stagnated blood circulation due to high acceleration by administering the drug to the pilot. Furthermore, the DDS activates automatically upon the detection of another Newtype via the "Intention Automatic System".

MG 1/100 MSZ-010 ZZ Gundam (Ver.Ka)

MG 1/100 MSZ-010 ZZ Gundam (Ver.Ka)

Bandai

$71.00

The MSZ-010 ΖΖ Gundam (aka ΖΖ Gundam, ZZ; pronounced "Double Zeta") is the titular mobile suit of the anime Mobile Suit Gundam ZZ and is piloted by Judau Ashta. A direct development of the MSZ-006 Zeta Gundam, the ΖΖ Gundam, which had been completed through a prototype, was given the development code "θ" (thus also known as the "θ Gundam") as it was the sixth "Anaheim Gundam" after the RMS-099 Rick Dias (also known as “γ Gundam”). The development plan of the ΖΖ Gundam existed two years before the completion of the Zeta Gundam but was shelved due to internal competition and production delays. However, the performance advantage of the Zeta Gundam against new Titans mobile suits did not last long, and so development of the ΖΖ Gundam was resumed.The ΖΖ Gundam sought to reproduce the operating functions of the RX-78-2 Gundam and the G-Armor in a single machine. An advanced form of the RX-78-2 Gundam's Core Block System was also introduced. As a result, the ΖΖ Gundam can transform into a mobile armor form called the G-Fortress, which acts as a heavy combat bomber and for cruising in space and on earth. The ΖΖ Gundam can also separate into two independent fighter units, called the Core Top and Core Base. The Core Base, consisting of the ΖΖ's lower body and backpack, is operated through the FXA-07GB Neo Core Fighter attached to its front. The Core Top, consisting of the ΖΖ's upper body and double beam rifle, is operated through the cockpit in its nose unit or more frequently through the Neo Core Fighter, which is in its Core Block form, attached to the lower rear.The team on board the "Argama" typically operates the ΖΖ Gundam with a third Neo Core Fighter piloted by the Gundam's main pilot, Judau Ashta. When combining into the ΖΖ Gundam, forming the G-Fortress mode is the first step and consists of the Core Top and Core Base ejecting their Neo Core Fighters to dock with Judau's Neo Core Fighter in Core Block form. When transforming from the G-Fortress mode to MS mode, the large verniers in the arms and legs are retracted. However, this does not reduce total thrust as the surplus output is supplied to the attitude control thrusters distributed throughout the body and the number of operable thrusters are actually increased. Other parts that move during transformation include the flexible wing binders that also serve as arm-mounted wings shields, the shoulder thruster binders, the large backpack, etc.The engine installed in the backpack is originally meant for ships and could supply power for an entire ship. It also functions as the main thruster unit of the ΖΖ Gundam when in MS form, generating thrust equivalent to that of a large ship. The ΖΖ Gundam's armor is a multi-spaced structure composed of Gundarium γ alloy, capable of withstanding a mobile suit explosion at close range and resisting high water pressure. While it is impossible to completely defend against a direct hit of a mega particle beam, the wings shields are strong enough to prevent a direct hit on the cockpit.With its overall height limited to around 20 meters as requested by AEUG to maintain mobility, the ΖΖ Gundam's design also incorporated the movable frame and magnet coating technology. The generator output which had caused problems during early stages of ΖΖ's development was resolved by incorporating three compact, high-output generators. The movable modules and armor parts, which have a multi-layered structure, are connected by hinges and slide rails which have magnet coating, making them flexible and robust while allowing instantaneous transformation of the ΖΖ Gundam. However, the complexity of the system resulted in poor maintainability and productivity also deteriorated.The control system of the ΖΖ Gundam is equipped with a Bio-Sensor, which is a simplified Psycommu system, as an interface for Newtype pilots. An improved version of the Biosensor installed in the Zeta Gundam, it improves the responsiveness of the mobile suit by supporting the control system with the pilot's brainwaves. However, as a protective measure, the Biosensor is inactive when a pilot with low Newtype abilities boards the ΖΖ Gundam. The unit is mounted in the ΖΖ Gundam's Core Block and the synchronization of the device is improved by inputting the brainwave patterns of the Neo Core Fighter's pilot.The ΖΖ Gundam has a number of powerful weaponry, including two hyper beam sabers which are also usable as beam cannons, a double beam rifle, a 21-tube missile launcher installed on the backpack, and a high mega cannon on the forehead. While the ΖΖ has a very destructive arsenal, its weapons systems require a high level of energy. As a result, the ΖΖ often found itself almost completely drained of power after using its high mega cannon. The ΖΖ Gundam's structural issues due to its complicated construction and transformation systems were eventually corrected with the MSZ-010S Enhanced ZZ Gundam and its massive final upgrade FA-010S Full Armor ZZ Gundam.

MG 1/100 Unicorn Gundam 02 Banshee (Ver. Ka)

MG 1/100 Unicorn Gundam 02 Banshee (Ver. Ka)

Bandai

$52.00

The RX-0 Unicorn Gundam 02 Banshee (aka Banshee) is a mobile suit that appears in Mobile Suit Gundam Unicorn. It is built alongside its brother unit, the RX-0 Unicorn Gundam, under the Earth Federation's UC Project. Originally piloted by Marida Cruz, it was later assigned to Riddhe Marcenas. After its completion alongside the Unicorn Gundam, the Banshee was eventually stationed on Earth with the Augusta Research Lab and tested for atmospheric combat. Rather than that of a Unicorn, the Banshee's motif is that of a lion, illustrated with gold accents on the forehead, a golden collar to signify a lion's mane (the Banshee originally had the same collar as the Unicorn but this was changed after it suffered damages while battling in space), and a much more elaborate horn/V-fin.The Banshee's armor is almost entirely black, and its psycho-frame emits a golden-orange glow when the NT-D is activated. Although the Banshee lacks the Unicorn's distinctive La+ System, its performance in atmospheric combat is vastly superior, presumably because of a significant reconfiguring of the suit's operating system to account for Earth's gravity and the atmosphere's frictional resistance.Combat improvements were made according to Unicorn Gundam's battle data, which had been relayed to the Augusta Research Lab. However, the two Gundams have no major operating differences. Aside from lacking the Unicorn's La+ operating system, the Banshee's raw performance is equal to that of the Unicorn. In other words, any modification to the Banshee (i.e. atmospheric combat performance) could also be applied to the Unicorn, making both suits equal in ability.In the anime version, it weighs more than Unit 1 and has a larger effective sensor radius. Its armament also differs from that of Unit 1, as it is equipped with the added psycho-frame armaments "Armed Armor BS" and "Armed Armor VN", granting it better continuous battle capability than Unit 1, and it is said to have a higher degree of completion.

MG 1/100 MSA-0011 [Ext] Ex-S Gundam/MSA-0011 S Gundam

MG 1/100 MSA-0011 [Ext] Ex-S Gundam/MSA-0011 S Gundam

Bandai

$142.00

The MSA-0011[Ext] Ex-S Gundam (aka Extraordinary-Superior Gundam) is an upgraded version of the MSA-0011 S Gundam that appears in Gundam Sentinel. It is piloted by Ryou Roots. By adding several new armor, weapons, and engine modules the engineers of Task Force Alpha's Pegasus III were able to upgrade the MSA-0011 S Gundam into the Ex-S Gundam. The Ex-S Gundam still had three cockpits, but Ryou Roots was the only person who piloted the mobile suit, and due to Ryou's poor piloting skills, it was up to ALICE, the Ex-S Gundam's highly advanced artificial intelligence combat computer, to do most of the fighting against more skilled opponents.With ALICE functioning as the co-pilot of the Ex-S Gundam, "she" was constantly getting more advanced. ALICE was constantly growing in comprehension and depth, and was swiftly evolving into something more akin to a fully rationalizing and thinking creature than a simple machine. ALICE could take full control of the Ex-S Gundam and its various components and weapons at any time, and would begin to do so constantly at times when "she" felt the Ex-S or Ryou were threatened. ALICE proved to be a useful co-pilot of the Ex-S Gundam, and was more than capable of compensating for Ryou's lack of skill.For defensive purposes, the Ex-S Gundam featured additional armor on the front of the chest which afforded extra protection for the first two cockpits. This extra chest armor also featured an I-Field generator which created an invisible barrier of Minovsky Particles around the Ex-S Gundam's cockpit block, protecting it from ranged beam attacks. Additional armor added onto the front of the torso also protected the third cockpit, while extra armor on both sides of the legs featured more verniers, additional propellant tanks, and thrusters.Two new large thruster units were mounted on the Ex-S Gundam's back, giving it incredible thrust and speed. Two large caliber beam cannons were mounted on both thruster units, giving the Ex-S Gundam two more back beam cannons than the S Gundam. The Ex-S Gundam's beam smart rifle was now attached to the front torso of the mobile suit instead of the hips, making room for the two hip beam cannons that were optional on the S Gundam to be attached to the sides of the Ex-S Gundam's waist permanently. The Ex-S Gundam's head featured four 60mm vulcan guns, while four additional 60mm vulcans were mounted on the tail stabilizer attached to the back.The Ex-S Gundam also had remote weaponry in the form of an INCOM, a small wire-guided red disc stored in the Ex-S Gundam's forehead that could fire beams when deployed. The Ex-S Gundam also featured two reflector INCOMs, stored in the large knee armor, which could be deployed and guided by wire like a standard INCOM. Reflector INCOMs do not fire beams but instead reflect beam fired from the Ex-S Gundam or another unit, and redirect it in another direction. Lastly, for use in melee combat situations, the Ex-S Gundam featured two beam sabers, also stored in the knee armor.Like its predecessor, the Ex-S Gundam was also capable of transforming into a waverider mode of sorts, but unlike the S Gundam, which divided into three separate components, the Ex-S Gundam changes into one large unit called the G-Cruiser. For its size, the G-Cruiser was incredibly fast and used for travelling over a great distance in a short amount of time. To conserve the fuel of the Ex-S Gundam for use in combat situations, the G-Cruiser had two large propellant tanks mounted in the front over the Ex-S Gundam's shoulders. These extra fuel tanks would be jettisoned when the G-Cruiser reaches the battlefield and transforms into the Ex-S Gundam.