Newly Restocked Gundam Gunpla Models at LAScaleModel – Explore the Latest Additions!

The MS-09 Dom (aka MS-09B Dom) is a mass-production ground combat mobile suit introduced in Mobile Suit Gundam. Its most well known pilots are the Black Tri-Stars. A heavy mobile suit developed by Zimmad, the MS-09 Dom was a ground combat machine equipped with hovercraft technology. It was fitted with thermonuclear jets and rockets under its feet, allowing it to quickly move across the ground, greatly improving its mobility compared to previous ground-use mobile suits. Thanks to sensors located in front of its feet, it was able to traverse uneven terrain. While in cruising mode, it could hover across the ground using only its thermonuclear jets. The Dom can hover at a maximum speed of 381 km/hr for up to 5 hours.Its primary thrusters adopted the Saturn Engine, a type of thermonuclear engine that used heavy elements such as zinc and lead as propellant, granting it higher thrust than thermonuclear engines that used lighter elements as propellant. The mobile suit's design was largely unchanged from the YMS-09 Prototype Dom aside from its appearance. It inherited the same cross-shaped monoeye rail from the MS-07C-5 Gouf Test Prototype, granting it an improved view of aerial targets. Lateral field of view was obtained by auxiliary sensors.For defense, the Dom was heavily protected, adopting a unique "skirt armor" design to protect weak points in the back, such as thrusters. Its cockpit hatch armor, which was its greatest weakness in the front, was also greatly enhanced. However, since the cockpit was entered directly from the front of the Dom, pilots in desert and wetland areas complained that the console panel would become dirty from entering and exiting. Meanwhile, the Dom's head was merged into its chest, a design intended to deflect and ricochet enemy projectiles, as well as lowering the possibility of being hit.The Dom's primary weapon, the 360mm Giant Bazooka, was developed in parallel with the mobile suit. It was capable of sinking a space cruiser with a single shot. It was also armed with a heat saber for close combat, as well as a scattering beam cannon in its chest, which was capable of blinding the enemy. It was said that the beam cannon was originally intended to be an energy port for beam weapons, but was repurposed after the development of beam weapons was delayed.

Eevee (Japanese: イーブイ, Hepburn: Iibui) (EE-vee[1]) is a Normal-type Pokémon introduced in Generation I. It's well known for being the Pokémon with the highest number of evolution possibilities (8), due to its unstable genetic makeup. It is the Version Mascot and First partner Pokémon for the game Pokémon: Let's Go, Eevee!. It also has a Gigantamax form.

The RX-0 Unicorn Gundam (ユニコーン ガンダム Yunikōn Gandamu?, or Unicorn, Unicorn Gundam 01, Singularity One) is the titular prototype mobile suit of the Mobile Suit Gundam Unicorn novel, its OVA adaptation and the television re-cut. Developed by Anaheim Electronics for the Earth Federation, it concealed a secret that could shake the future of all humanity, for it was the key to opening Laplace's Box. It is piloted by Banagher Links after the head of the Vist Foundation and his father, Cardeas Vist, entrusted it to him at the dawn of the Third Neo Zeon War in U.C. 0096.Produced as the final part of the E.F.S.F's reorganization plan, the "UC Project", the Unicorn Gundam is a revolutionary design meant to be the main symbol of the project's main goal: to destroy any traces of Zeonism in the Earth Sphere. Thus, not only does it feature a Gundam design, but it also incorporates an anti-Newtype system. Two prototype machines were completed at Anaheim Electronics' factory in Granada. However, when the Vist Foundation took control of the project, they installed a special "La+ Program" OS into the Gundam, turning it into a symbol of possibility by making it the key to finding Laplace's Box: the embodied hope of the Universal Century. Featuring the most advanced mobile suit technology of the time, its performance is unmatched.Incorporating test data from the experimental MSN-06S Sinanju Stein, the Unicorn Gundam's entire frame is built with Psycho-Frame material, drastically increasing the unit's responsiveness and allowing it to be piloted like an extension of the pilot's body. While mobile suits used during the Second Neo Zeon War implemented psycho-frame technology on a limited basis, the Unicorn is the first "full psycho-frame" mobile suit. In some cases, this responsiveness is so high that the machine appears to act on its own without any actions from the pilot. In addition, the Unicorn utilizes a special system known as the "NT-D" (or Newtype Destroyer) which activates the suit's psycho-frame and dramatically increases the suit's performance.In its normal form, the "Unicorn Mode", the Unicorn Gundam's head is similar in appearance to those of Londo Bell's mass-produced mobile suits, with the addition of a single, horn-like antenna on its forehead (which gives it the name "Unicorn"). Destroy Mode is the form when Unicorn Gundam's NT-D System is activated. The transformation is marked by an expansion of the suit's frame. The armor seams separate and lock down into various hard-points, while the newly exposed psycho-frame emits a pinkish-red or greenish (Awakened) glow (attributed to the Psycho-Field phenomenon). In this mode, the Unicorn becomes taller, reveal six more thrusters, and its head transforms to one with standard Gundam features, the visor and face guard retracts into the head to reveal the twin eyes and mouth plate, and the antenna splitting into a V-fin. To prevent its transformation being interrupted, the strength of its I-Field will be increased temporarily. Additionally, a pair of sub-sensors are revealed on the shoulders, and two concealed beam sabers extend out of the backpack.In Destroy Mode, the suit's psycho-frame scans the pilot's thoughts and directly transmits them to the suit's drive system; in other words, the Unicorn can be controlled by the pilot's thoughts alone. Additionally, the mode also causes the machine's performance - in thrust, generator output, and sensory radius - to be increased to unmeasurable levels. The NT-D also allows the Unicorn to take control of an enemy's psycommu weapons (also known as "Psycommu Jack") by emitting a Psycho-Field. However, the stress placed on the mind by manipulating an object more than tenfold the size of an average human is extraordinary. Even with the aid of the psycho-frame, the pilot's mind can only endure roughly five minutes of operation before a limiter is activated, deactivating the psycho-frame and returning the mobile suit to its Unicorn Mode.With the performance limiters disengaged, the Unicorn can accelerate up to 20 G's in Destroy Mode; to alleviate such high levels of G forces placed on the pilot, a drug administration system called the "DDS" is fitted on the pilot suit. It suppresses stagnated blood circulation due to high acceleration by administering the drug to the pilot. Furthermore, the DDS activates automatically upon the detection of another Newtype via the "Intention Automatic System".

The Infinite Nova 1/100 PMD In Era+ Aurora is a premium mecha model kit from the renowned In Era+ series. This model features a robust alloy skeleton combined with high-quality plastic components, ensuring both durability and intricate detailing. Standing approximately 9.05 inches (23cm) tall at a 1/100 scale, the Aurora is fully articulated, allowing for dynamic and expressive poses. Key Features: Scale and Materials: 1/100 scale model kit made of alloy and plastic, offering a sturdy build with detailed craftsmanship. Articulation: Fully articulated design enables a wide range of motion for various poses. Accessories: Equipped with a spear, blaster rifle, two knives, a beam blade, two beam knives, and a stand for display purposes. Design Details: The Aurora model showcases a unique aesthetic with pre-painted parts, providing a visually striking appearance straight out of the box. Release Information: Initially released in China in April 2024, the Infinite Nova 1/100 PMD In Era+ Aurora became available internationally by mid-2024. This model kit has been praised for its exceptional plastic quality and innovative design, making it a standout piece for collectors and enthusiasts alike.

Xerneas (Japanese: ゼルネアス, Hepburn: Zeruneasu) (ZURR-nee-us) is a Fairy-type Legendary Pokémon introduced in Generation VI. It is the mascot for Pokémon X. It is Yveltal's counterpart and is a member of the Aura Trio alongside Yveltal and Zygarde.

Mr.COLOR has long been regarded highly by modelers worldwide as a model paint that delivers an outstanding finish. A wide range of colors are available, and these are suitable for military tanks, aircraft, car models, robot models, and many more. Size: 10ml UPS Ground Shipping Only

Product Name: YR-04 Fire Lord Series: Particle Awakening Armament (F.P.A.A.) Scale: 1/100 Material: ABS Description: The YR-04 Fire Lord is inspired by medieval chivalry, symbolizing courage, loyalty, and honor. Its design masterfully balances elegance and power, making it a striking addition to any mecha model collection. Key features include: A sleek and elongated knight’s lance, representing the fearless charge of a warrior. A durable defensive shield, embodying the steadfast determination to protect and defend. Highly articulated joints, allowing for a wide range of dynamic and imposing poses. Intricate armor detailing, capturing the essence of medieval aesthetics fused with futuristic elements. Estimated Release Date: March - April 2025

SNAA 1/144 BE The Round Table Knights - Iron Sickle is a stunning addition to the Round Table Knights series, combining sleek mecha design with medieval-inspired aesthetics. This 1/144 scale model kit features dynamic articulation, detailed weaponry, and sharp design elements, making it a must-have for collectors and builders alike. Crafted from durable polystyrene material, this model is perfect for both casual builders and expert customizers. It offers easy assembly with snap-fit construction, requiring no glue for completion. Specifications: Scale: 1/144 Material: Polystyrene Prepare for battle and bring the legend of the Round Table Knights to your collection today!

The Bandai 30MM Armored Core VI: Fires of Rubicon Schneider Nachtreiher/40E Steel Haze Model Kit is a detailed plastic model kit from Bandai's 30 Minutes Missions (30MM) series, representing the Steel Haze Armored Core piloted by V.IV Rusty in the game "Armored Core VI: Fires of Rubicon". This kit emphasizes quick assembly and extensive customization, characteristic of the 30MM line. Key Features: Scale: 1/144 Height: Approximately 5.31 inches (13.5 cm) Articulation: Multiple points of articulation for dynamic posing Modular Design: Compatible with other 30MM series kits for extensive customization Accessories: Steel Haze weapon set Vvc-774LS parts for deployed state reproduction Weapon hanger for left shoulder Sticker sheet for added detailing This model kit offers a straightforward assembly process without the need for glue or paint, making it suitable for both beginners and experienced builders. The modular design allows for personalized configurations, enhancing the building experience.

The XVX-016 Gundam Aerial (ガンダム・エアリアル Gandamu Eariaru?) is a mobile suit introduced in Mobile Suit Gundam the Witch from Mercury. It's piloted by the protagonist of the series, Suletta Mercury. The MS that Suletta Mercury brought to the school. Its basic structure, in which Joints that imitate the human body are driven by EMTs (electric motors), is based on the same existing standards as mobile suits produced by other companies. Although it's a machine that can be handled by ordinary pilots, it displays a performance that sets it apart from the norm when Suletta is boarding it. Its powers are mediated by a new mineral called Permet, being very similar to the characteristics of the forbidden machine GUND-ARM, popularly known as "GUNDAM", which employed "GUND FORMAT", a system for MS that aimed at human augmentation.

The LEGEND BB #397 Musha Victory Gundam is a Super Deformed (SD) model kit that reimagines the Victory Gundam with a samurai-inspired aesthetic. This kit offers a unique building experience, combining the futuristic design of the Victory Gundam with traditional Japanese warrior elements. Key Features: Scale and Materials: Non-scale model kit crafted from high-quality injection-molded plastic, ensuring durability and ease of assembly. Articulation: Features multiple points of articulation, allowing for dynamic poses that showcase its distinctive armor and weaponry. Weaponry and Accessories: Equipped with a variety of armaments, including a sword and shield, enhancing its combat-ready appearance. Design Details: Incorporates samurai armor elements, blending the mechanical aspects of the Victory Gundam with traditional Japanese warrior motifs. Release Information: Released as part of Bandai's LEGEND BB series, this kit revitalizes classic SD Gundam designs with modern engineering and enhanced detail. The LEGEND BB #397 Musha Victory Gundam is an excellent addition for collectors and builders who appreciate the fusion of Gundam's futuristic design with traditional samurai elements, offering both a rewarding build and a distinctive display piece.

Model: OTH-C108 Size: 9cm x 4cm x 1.3cm Polished on both sides. The green side is for fine sanding at #1000 grit and the white side is for polishing/buffing at #4000 grit.

The WanXingJuBian - Apocalypse 天启 Tactical Automatic Multi Form External Reinforced Armor is a premium third-party mecha model kit that embodies the fusion of tactical engineering and futuristic aesthetics. Designed with a commanding presence and versatile armor configurations, this kit delivers a unique and powerful addition to any advanced mecha collection. Key Features: Scale and Materials: Approximately 1/100 scale model crafted from high-quality ABS and POM plastic, with select metal parts for structural reinforcement and enhanced durability. Articulation: Fully articulated frame featuring complex joint mechanics, allowing dynamic posing and transformation between multiple tactical configurations. Accessories: Includes a wide range of modular weapons, including high-output beam cannons, shield systems, blade units, and articulated mechanical wings with transformation capabilities. Design Details: Features sharp angular armor plating, layered external reinforcement modules, and a high-contrast color scheme with clear effect parts for energy emitters. LED-ready sections (LED not included) are designed into the chest and eye unit for dramatic display enhancement. Release Information: Released in 2024 by WanXingJuBian, the Apocalypse 天启 represents the pinnacle of their Tactical Armor series, focusing on multi-form adaptability and combat versatility. It reflects the evolution of third-party mecha design by integrating transformation engineering with aesthetic detail, establishing itself as a flagship release for collectors and enthusiasts alike. The WanXingJuBian - Apocalypse 天启 Tactical Automatic Multi Form External Reinforced Armor is ideal for experienced builders seeking a display-grade centerpiece that balances mechanical complexity with bold, militaristic visual appeal.

Product Description The Legend of Star General series continues with Motor Nuclear's MNP-XH01 Bai Qi in 1/72 scale figure form! Product Features Toy Size: 8.5 inches Scale: 1/72 Scale Original character Highly detailed Fully articulated Instructions may or may not include an English translation Made of plastic The product is brand new and in mint condition Box Contents 1 x MNP-XH01 Bai Qi Figure 5 x Pairs of Hands Effect Parts 16 x clear parts 1 x Lance 8 x Daggers Connection Pieces 1 x Clear Base Instructions

In Stock & Ready to Ship Product Name: Ling Wang Xingshi – Awakened Lion WarriorScale: 1/12 (Height: approx. 16.5 cm)Materials: ABS, PVC, Electronic ComponentsRelease Date: Q1 2025 Product Description:Unleash the power of tradition and divinity with 岭王醒狮 (Ling Wang Xing Shi / Awakened Lion), an extraordinary 1/12 scale action figure inspired by the legendary "Awakened Lion" from Chinese culture. Part of the Eternal Daylight organization, this mecha girl embodies the light and sacred energy of divine warriors, battling chaos with grace and fire. Design Highlights: Head Sculpt Options: Four pre-painted expressions (starry-eyed, playful, crying, and shouting) and four blank faces for custom designs. Weapon: Lion Dance Hammer – A staff-like weapon evolved from the iconic lion dance ball, featuring a built-in vibrating LED system with dazzling light effects. Activate the light with a simple tap on the hammer’s head. Fire Lion Blaze Armor: Equipped with fiery special effect parts to simulate flames encircling her body and hair. Armor pieces are interchangeable, with chest armor available in red or translucent orange. Customizable Scarf: A wire-core fabric scarf allows for dynamic posing while maintaining lightweight flexibility. Lion Claw Gauntlets: Articulated claw-like hands with movable eyes for a variety of fierce expressions. Body and Articulation Features: Highly Articulated New Body Frame: Includes three pairs of interchangeable hands for the unarmored body and seven pairs for the armored form. Dual Bodies Included: Separate armored and unarmored figures, each with distinct hair colors. Knee Detail: Gold undercoat adds a premium metallic finish. Cat Paw Accessories: A playful addition to the unarmored form for extra charm. Set Contents: 1 unarmored figure 1 armored figure 1 dynamic scarf 1 Lion Dance Hammer 1 LED vibration module with 3 batteries 3 pairs of unarmored hands 7 pairs of armored hands 4 pre-painted faceplates 4 blank faceplates 1 display stand Eye decal sheet Marking decal sheet Collector’s card Instruction manual

The ZGMF-X09A Justice Gundam is a mobile suit introduced in Mobile Suit Gundam SEED and it is piloted by Athrun Zala. One of ZAFT's five ZGMF-X Gundam units produced in CE 71 using technology derived from the four captured Alliance's Gundam, the Justice Gundam's main feature is the Fatum-00 unit on its back. This complex armament unit normally serves as the main thrusters, granting overwhelming acceleration as well as mobility when deployed horizontally and this configuration is also known as 'High-Mobility Aerial Tactics (HiMAT) Mode'. It also grants flight capabilities in the atmosphere and can be deployed as a separate unmanned unit or a subflight unit. It is armed with beam cannons and machine guns.Other weapons of the Justice included beam sabers, beam rifle, shield, beam boomerangs and head-mounted CIWS guns. In comparison to the other ZGMF-X Gundam units, the Justice's armament is relatively simple and pales in firepower compared to its sibling, the ZGMF-X10A Freedom Gundam. However, the Justice's true value lies in its incredible mobility and the various tactics it can employ using the Fatum-00. It can also dock with a support unit, the METEOR unit, for heavier firepower and greater speed, and has an advanced targeting system, the Multi Lock-On System, which allows it to fire at multiple enemy units simultaneously.Justice also has a tall sensor spine on the top of its head, similar to that of the GAT-X303 Aegis Gundam, and this enhances its ability to collect information in the battlefield. It is designed to be operated alongside the Freedom and for this purpose, the warship Eternal is designed specifically to maintain both suits. Like the four other ZGMF-X Gundam units, Justice is armored with Phase Shift Armor and has virtually unlimited combat endurance as it is powered by a nuclear reactor thanks to the Neutron Jammer Canceller.

The GN-001 Gundam Exia (aka Exia, Gundam Seven Swords) is a mobile suit featured in season one of Mobile Suit Gundam 00 and is piloted by Setsuna F. Seiei. Specializing in close combat and armed mainly with melee weapons, the Gundam Exia is one of four Gundams deployed in AD 2307 by the paramilitary organization, Celestial Being, to eliminate world conflicts through armed interventions. To fight against the world with their small numbers and win, these Gundams have overwhelming power and equipped with advanced technology a century ahead of its time. Notably, the semi-perpetual GN Drive mounted in the center of the Gundams provide almost limitless energy and generates special, multifunctional GN Particles. The GN Particles grant outstanding mobility, including independent flight capabilities, and are also utilized for beam weaponry, attitude control, and stealth purposes as the discharged particles can cause electromagnetic interference, leaving conventional communication and radar devices useless. The Gundams also share common aspects with conventional mobile suits, such as the use of E-Carbon for its armor material. However, the Gundams' E-Carbon has higher defensive power due to the use of advanced materials.An example of Exia's overwhelming power is that its output was estimated to be about six times that of the SVMS-01 Union Flag, one of the newest conventional mobile suits at the time. The technical hurdles that had to be overcome to create the powerful Gundams and their GN Drives were high, making their production extremely difficult and caused the Gundams' development to occur in phases. The first generation machine, the GN-000 0 Gundam, established the basic system of a mobile suit powered by a GN Drive, and armed with a beam gun and beam saber. Subsequently, four second generation machines were developed with individual capabilities required for armed intervention, and their data served as a basis for the third generation machines, which included Exia and the other three Gundams deployed in the armed interventions. Specifically, Exia was developed from the GNY-001 Gundam Astraea, a general-purpose mobile suit with human-like movability that was used for testing various weapons, and the two machines have a number of similarities in terms of appearance.The Astraea's movability aspect is particularly appropriate for the Exia, which requires the same range of articulations as the human body due to its close combat specialization. Thus, while the Exia is armed mainly with melee weapons, its basic performance remains that of a general-purpose mobile suit. In fact, Exia is the only Gundam deployed for the armed intervention that has a body structure capable of range of articulations like the human body's, and the omission of such a structure in the other three Gundams is simply because they do not require it as their specialization is in other areas. To achieve its wide range of articulations, Exia has the most complex basic frame out of the four Gundams, its armor is also more minutely segmentalized as well. This armor design however causes some internal structures and the joints to be unprotected during certain poses, lowering Exia's defensive capability. On the other hand, this design does provides better mobility, giving Exia the best projectile evasion capability among the four Gundams.The Exia also has finer attitude control capabilities than the other Gundams, which is beneficial for close combat, and this is related to its GN Cables. The GN Cables, also known as “GN Power Lines”, are the light purple-colored cables running through various parts of the Exia's body and also one of its eye-catching visual features. While these cables are also found on other Gundams, the ones extending from the shoulders to the upper arms are unique to Exia. The cables facilitate the supply of tremendous amount of GN Particles, and thus energy, to each part of the Gundam instantaneously. They are also used for attitude control due to the GN Particles' mass reduction effect, and so, the Exia which has more cables on its exterior than the other Gundams is able to achieve finer control. In terms of defense however, such placements are dangerous, and later in GN-001REII Gundam Exia Repair II, the cables become mostly stowed in the armor.The GN Particles' mass reduction effect also lightens the Gundam, and can be used to alter the mass ratio of various body parts. Due to this latter ability, it is possible to freely control the machine's inertia and turning capabilities when in the air, and for Active Mass Balance Auto-Control (AMBAC) when in space. This also eliminates the need for the legs to "walk” when moving. As for the control of GN Particles, it is largely carried out by the two clavicle antennas on the Gundam's torso. A minor role is played by the third generation Gundams' head antenna, which is experimentally equipped with particle control functions. The head antenna also has communications and radar search functions, as well as the black box for quantum communication linkage with Veda (the Celestial Being's quantum computing system). The rest of the Gundams' humanoid head unit also contain systems responsible for controlling the entire body, much like a human's head. On a side note, the Exia's head is designed to look like the helmet of the pilot suit worn by the Gundam Meisters in AD 2307-2308 to express the belief of “Meister = Gundam”.While the GN Drive can produce GN Particles endlessly, even when the Gundams are inactive, there is a limit to the amount that could be instantaneously produced. Thus, continuous or heavy usage of beam weapons and other GN Particles consuming systems might cause the Gundams to run out of particles. To avoid this, the Gundams have GN Condensers in various body parts to store excess GN Particles. For maintenance purposes, the condensers can display the particles' compression rate and the amount stored. During mission, this display function is used for transmitting coded messages to allied units. On the matter of GN Drives, Celestial Being only created five units as that was deemed to be the minimum needed for armed interventions. The low number is not only due to difficulties in manufacturing the GN Drive, which requires Jupiter's high gravity environment, but also because having more GN Drives would increase the risk of them falling into the enemy's hands.The Gundam Exia is nicknamed “Gundam Seven Swords” as its development code was “Seven Swords”, and as indicated by this name, it is equipped with a total of seven blades to meet the needs of the moment during combat. Of these seven, the GN Sword, GN Long Blade, GN Short Blade are physical blades, while the rest are beam-based and consisted of two GN Beam Sabers and two GN Beam Daggers. The GN Sword serves as the primary weapon and due to its low energy consumption, the Exia has an advantage in prolonged combat, which mainly occurs when fighting ace pilots or when subjected to traps such as the three major bloc's joint military exercise. The three physical blades also serve as countermeasures against GN Field, a protective barrier made of GN Particles. In other words, Exia is also intended to fight against Gundam/GN Drive-equipped machine that is piloted by a betrayer or captured by the enemy and used against Celestial Being. Early on, an alternate configuration of the GN-005 Gundam Virtue also had an anti-betrayer role, but its design was dropped and this increased the responsibilities placed on Exia and its Gundam Meister.Other armaments include a GN Shield for defense that also provides protection to the internal structures and joints that might be exposed during movements. The GN Shield is usually in a compact size to maintain Exia's range of articulations, but can expand to increase the defensive area when needed. Similarly, the GN Sword, can fold its blade and has a Rifle Mode for ranged combat. The last of Exia's armament is another ranged weapon in the form of a pair of low-power GN Vulcans mounted in the forearms. During battles, the Exia gloriously sliced through its opponents in close combat, leaving a powerful impression on those who witnessed it and contributing greatly to the instillment of a "fear of Gundams" in the world. This was already anticipated by Celestial Being, and it is because of this that the organization's tactical forecaster, Sumeragi Lee Noriega, selected the Exia to intervene in the AEU-09 AEU Enact's presentation ceremony, which became the unveiling of the paramilitary organization.The Gundam Exia has an "Over Boost Mode" that temporarily boosts its GN Drive's performance and thus increase the mobile suit's capabilities. During an emergency, the Exia can activate a special "Trans-Am System" that enhances its thrust and defensive capabilities, as well as increase its output to three times that of its normal specifications for a limited period of time. This system also causes the Gundam to glow red, but it is a double-edged sword as Exia's performance will drop dramatically once it ends. A number of additional optional equipment was also developed for Exia, such as the high mobility Avalanche Unit and the GNR-001E GN Arms Type-E support machine. When equipped with the Avalanche Unit, the Exia becomes the GN-001/hs-A01 Gundam Avalanche Exia and can speed past specialized high-speed mobile suits, which it normally cannot do despite having remarkable mobility. When docked with the GN Arms Type-E, the Exia becomes the GN-001+GNR-001E GN Armor Type-E, obtaining better mobility, offensive and defensive capabilities.

ExAMACS units with enhanced command communication abilities developed by the Byron Forces around the same time as the Portanova. They are equipped with a multifunctional radar placed on top of their backpacks that allows units to instantly analyze combat situations. They are specifically designed for local battles and have highly expandable forearms and legs with enhanced bulletproof capabilities. The range of power of the standardly equipped handguns can be changed by using expansion modules.

The XXXG-01W Wing Gundam (aka Gundam Zero-One) is the titular mobile suit of the Mobile Suit Gundam Wing series. The unit was primarily piloted by Heero Yuy.Out of the five original Gundams created for Operation Meteor, Wing Gundam is the most well-balanced in terms of abilities and bears the closest resemblance to their common ancestor: the XXXG-00W0 Wing Gundam Zero. Similar to Wing Zero, the Wing Gundam can transform into an alternate flight form known as "Bird Mode" and has a powerful Buster Rifle as part of its armaments. However, the "ZERO System" interface (which had technical problems) and other parts considered to be excessive were not included, and the skills of the pilot are needed to make up for the shortfall.The major contributor to Wing's mobility is the pair of wing units on the backpack. These units not only generate lift but can also change the aerodynamic characteristics of the mobile suit through the movements of their individual panels, supporting a range of speeds from stall to hypersonic. Even in outer space, the wing units exhibit high attitude control capability using both AMBAC and built-in vernier thrusters. By transforming into Bird Mode, Wing's mobility and movement range are increased further, allowing it to conduct operations that other Gundams could not. The leg thrusters on the back of the knees serve as the main verniers in Bird Mode and are also used for dashing on the ground in MS mode.The Wing Gundam EW is Hajime Katoki's redesign of Wing created after the release of the Gundam Wing sequel OVA/movie Endless Waltz, which has been featured in the Glory of the Losers manga re-telling of the series (among other works). The redesigned Wing retains largely the same armament and abilities, but resembles Wing Zero in appearance even more than before and can be equipped with extra energy cartridges to enable the Buster Rifle to fire a maximum of nine shots instead of three.

The Tamiya Extra-Thin Quick-Setting Cement is a great time saver for the hobby enthusiast. This thin cement dries around 4 times faster than the Tamiya Extra-Thin Cement and is perfect for small parts. Being a thin formula it is able to flow into small seams or cracks and will set very quickly. Modeling Tip:It is best to use the Quick Setting Extra Thin Cement when you are looking to glue parts together very quickly, in order to move onto the next step of the building process faster. It is also recommended that you are sure of your parts attachment and fit when using this faster setting glue. The Quick Setting Cement typically dries in under 10 seconds.NOTE: Not recommended for larger gaps or for use with elastomer (used on tank tracks) as it can cause brittleness.