Super Deformed Gundam

The XXXG-01W Wing Gundam (aka Gundam 01, Wing Gundam [Early Type] or Wing Gundam [Ver.Ka.]) is the titular mobile suit of the manga Mobile Suit Gundam Wing Endless Waltz: Glory of the Losers. It was primarily piloted by Heero Yuy.

The XXXG-00W0 Wing Gundam Zero (ウイングガンダムゼロ Uingu Gandamu Zero?) (aka Wing Zero, Wing 0, or just Zero) is a mobile suit that appears in Mobile Suit Gundam Wing. Wing Zero was the first Gundam designed by the five engineers who had developed the OZ-00MS Tallgeese. Around A.C. 175, the MS, which was developed as a "weapon" by OZ, began to evolve as an epoch-making mobile weapon based on the Tallgeese (Prototype Leo). Meanwhile, several engineers that were at the core of the Tallgeese development ran away from OZ to develop even higher performance MS. Five of them gathered to develop a MS that would adopt "technology and materials that did not yet exist at that point in time", including "Gundanium", which was a cutting-edge material at that time. Having been developed in light of the Tallgeese's failure, it became a dreadful machine equipped with an interface that transcended the limits of the pilot. That is "Wing Zero", and the material adopted gave it the code name "Gundam". By transforming into Neo Bird Mode, high-speed cruising is possible; in addition, the Twin Buster Rifle has the power to destroy a space colony in a single hit.Wing Zero's head unit is an aggregation of various sensors and head Vulcan Guns are not equipped. Its chest unit is equipped with the main generator and a "ZERO System" built-in type cockpit. The ZERO System also turned out to be what the five engineers feared the most as it forced the pilot to achieve the "perfect victory". The five engineers, harboring a fear of the dimension of Wing Zero's excessive destruction coefficient (in practice, the parts with the required specifications could not have been supplied at that point in time), suspended the machine's development and sealed its design data. In hiding, the five engineers who had returned to their respective base colonies would develop five "Gundams" that could be said to be unique Wing Zero-derived machines. And then in A.C. 195, the seal was broken by Quatre Raberba Winner, one of the five Gundam pilots who had carried out Operation Meteor; and Wing Zero, which had been impossible to build at the time of its design, is born.

The SD-237S Star Winning Gundam is a Gunpla that appears in Gundam Build Fighters Try and Gundam Build Fighters Try Island Wars. An upgrade of the SD-237 Winning Gundam, it is built and piloted by Fumina Hoshino. Realizing that the Winning Gundam is too support-oriented, Fumina sets out to upgrade her Gunpla with more individual fighting power and the end result is the Star Winning Gundam. The suit's primary weapons consist of a beam machine gun that can transform into a handheld blade, and four remote controlled weaponry known as Star Funnels that can be used for offensive, defensive or support purposes. The Star Funnels can also generate Plavsky Power Gate to enhance its allies' attacks. When greater firepower is required, the Star Winning Gundam can transform into "Real Mode" (a standard 1/144 Gunpla form), allowing it to launch a powerful ranged beam attack known as the Winning Beam when it enters 'Full Mode'. Like the Winning Gundam, the Star Winning Gundam can also transform into various flight forms. The head of Star Winning Gundam can transform into a Core Fighter. The suit, sans the backpack, can transform into a Core Booster, and the Mega Core Booster is formed when the backpack is added.Before the finals of the 13th U-19 Championship, the Star Winning was remodelled so that its polycaps are interchangeable with that of its teammates. This allows the Star Winning's parts to be used to repair another damaged Gunpla, so that the latter can fight properly during the overtime battle as the team's representative. To prepare for the 14th U-19 National Tournament, Team Try Fighters came up with a New Winning Road attack where the Star Funnels' Plavsky Power Gate is used to transform allied Gunpla into energy that is then absorbed by KMK-B01 Kamiki Burning Gundam, powering it up.

The NZ-666 Kshatriya (クシャトリヤ, Kushatoriya), aka the "Quad-wing", is a mobile suit featured in the novel and OVA series Mobile Suit Gundam Unicorn. It was piloted by Marida Cruz.

Knight Gundam (also known as Kishi Gundam) is one of the titular mobile suits of the SD Gundam Franchise, which started with SD Gundam Gaiden. Unlike the samurai-inspired Musha Gundam, Knight Gundam is based on a more western style of herioc fantasy.A non-SD version, designed by Hajime Katoki, would appear as a secret character in Dynasty Warriors Gundam 3. This version appears sentient, and is voiced by Yasunori Matsumoto in Japanese, or by Lucas Gilbertson in English.

The ZGMF-1000 ZAKU Warrior is a mobile suit used by ZAFT introduced in the anime Mobile Suit Gundam SEED Destiny.

The MSN-04 Sazabi is a mobile suit introduced in Mobile Suit Gundam: Char's Counterattack. It is piloted by Char Aznable. After Char Aznable returned as the leader of his own Neo Zeon faction in U.C. 0093, he ordered his engineers to create a new mobile suit which would fit his piloting skills and Newtype powers. The result was the MSN-04 Sazabi, which was later built by the Luna-based contractor Anaheim Electronics [1][2]. With an overall height of 25.6 meters, the Sazabi is much bigger than most standard mobile suits, but thanks to the use of lightweight armor materials and a great number of thrusters [3] it is much faster and maneuverable than other suits. The suit is armed with an abdomen-mounted scattering mega particle cannon, a beam shot rifle, a pair of beam sabers stored in the arms and a shield with three missiles as well as a beam tomahawk.Because Char is a Newtype, the Sazabi was also equipped with six funnels which the pilot could control through his psycowaves via a Psycommu system. The Sazabi was also the first MS to be equipped with the revolutionary new psycoframe cockpit. This system featured microscopic psycommu receiver circuits installed throughout a mobile suit's internal frame and cockpit walls. These tiny circuits amplify and transmit a Newtype pilot's psycowaves, enabling the mobile suit to respond instantaneously to mental commands.

The SD EX-Standard Unicorn Gundam (Destroy Mode) from Mobile Suit Gundam Unicorn is a Super Deformed (SD) model kit that offers a compact and stylized rendition of the iconic Unicorn Gundam in its Destroy Mode, featuring enhanced articulation and detailed design elements. Key Features: Scale and Materials: SD scale model crafted from high-quality plastic, ensuring durability and ease of assembly. Articulation: Despite its SD design, it features enhanced articulation, allowing for dynamic poses, including the iconic Destroy Mode stance. Accessories: Equipped with the Beam Magnum and Shield for versatile display options. Design Details: Showcases the distinctive Psycho-Frame elements, molded in color with foil stickers for added detailing. Release Information: Released in 2015 as part of Bandai's SD EX-Standard line, this kit combines the charm of SD proportions with the intricate design elements of the Unicorn Gundam, making it a delightful addition to any Gunpla collection. The SD EX-Standard Unicorn Gundam (Destroy Mode) is ideal for both beginners and seasoned builders, offering a fun and straightforward assembly process, along with the opportunity to recreate one of the most beloved mobile suits in a unique, stylized form.

"Gundam Aerial" x " ONMITSU GUNDAM", the famous character of yesteryear x The revival of KirahaganeThe long-awaited new-generation ninja, filled with new and old elements, has arrived!Kirahagane is an application of in-mold decoration technology where layers of film are applied during injection molding.The kit comes with a wide variety of equipment.The Shuriken can be recreated by rearranging the armaments.Internal frames specialized for mobility are built in.The range of articulation of the elbow allows for the two-sworded posture.Parts that work with "SDW HEROES TENKAMUSODAISHOGUN" (sold separately) are included.

Liu Bei Unicorn Gundam- He is a member of "Dragon's Watch," a vigilante group in the Shu Area, which is not targeted by Etiolation Trinity virus. After meeting Guan Yu Nu Gundam and Zhang Fei God Gundam, he makes an important decision: To save the world. He eventually starts to gain comrades who are drawn to his strong passion.

Ma Chao Gundam Barbatos- The youngest member of Dragon's Watch. Normally he is calm and collected, but he has a hot-blooded side during combat.

The GN-001 Gundam Exia (aka Exia, Gundam Seven Swords) is a mobile suit featured in season one of Mobile Suit Gundam 00 and is piloted by Setsuna F. Seiei. Specializing in close combat and armed mainly with melee weapons, the Gundam Exia is one of four Gundams deployed in AD 2307 by the paramilitary organization, Celestial Being, to eliminate world conflicts through armed interventions. To fight against the world with their small numbers and win, these Gundams have overwhelming power and equipped with advanced technology a century ahead of its time. Notably, the semi-perpetual GN Drive mounted in the center of the Gundams provide almost limitless energy and generates special, multifunctional GN Particles. The GN Particles grant outstanding mobility, including independent flight capabilities, and are also utilized for beam weaponry, attitude control, and stealth purposes as the discharged particles can cause electromagnetic interference, leaving conventional communication and radar devices useless. The Gundams also share common aspects with conventional mobile suits, such as the use of E-Carbon for its armor material. However, the Gundams' E-Carbon has higher defensive power due to the use of advanced materials.An example of Exia's overwhelming power is that its output was estimated to be about six times that of the SVMS-01 Union Flag, one of the newest conventional mobile suits at the time. The technical hurdles that had to be overcome to create the powerful Gundams and their GN Drives were high, making their production extremely difficult and caused the Gundams' development to occur in phases. The first generation machine, the GN-000 0 Gundam, established the basic system of a mobile suit powered by a GN Drive, and armed with a beam gun and beam saber. Subsequently, four second generation machines were developed with individual capabilities required for armed intervention, and their data served as a basis for the third generation machines, which included Exia and the other three Gundams deployed in the armed interventions. Specifically, Exia was developed from the GNY-001 Gundam Astraea, a general-purpose mobile suit with human-like movability that was used for testing various weapons, and the two machines have a number of similarities in terms of appearance.The Astraea's movability aspect is particularly appropriate for the Exia, which requires the same range of articulations as the human body due to its close combat specialization. Thus, while the Exia is armed mainly with melee weapons, its basic performance remains that of a general-purpose mobile suit. In fact, Exia is the only Gundam deployed for the armed intervention that has a body structure capable of range of articulations like the human body's, and the omission of such a structure in the other three Gundams is simply because they do not require it as their specialization is in other areas. To achieve its wide range of articulations, Exia has the most complex basic frame out of the four Gundams, its armor is also more minutely segmentalized as well. This armor design however causes some internal structures and the joints to be unprotected during certain poses, lowering Exia's defensive capability. On the other hand, this design does provides better mobility, giving Exia the best projectile evasion capability among the four Gundams.The Exia also has finer attitude control capabilities than the other Gundams, which is beneficial for close combat, and this is related to its GN Cables. The GN Cables, also known as “GN Power Lines”, are the light purple-colored cables running through various parts of the Exia's body and also one of its eye-catching visual features. While these cables are also found on other Gundams, the ones extending from the shoulders to the upper arms are unique to Exia. The cables facilitate the supply of tremendous amount of GN Particles, and thus energy, to each part of the Gundam instantaneously. They are also used for attitude control due to the GN Particles' mass reduction effect, and so, the Exia which has more cables on its exterior than the other Gundams is able to achieve finer control. In terms of defense however, such placements are dangerous, and later in GN-001REII Gundam Exia Repair II, the cables become mostly stowed in the armor.The GN Particles' mass reduction effect also lightens the Gundam, and can be used to alter the mass ratio of various body parts. Due to this latter ability, it is possible to freely control the machine's inertia and turning capabilities when in the air, and for Active Mass Balance Auto-Control (AMBAC) when in space. This also eliminates the need for the legs to "walk” when moving. As for the control of GN Particles, it is largely carried out by the two clavicle antennas on the Gundam's torso. A minor role is played by the third generation Gundams' head antenna, which is experimentally equipped with particle control functions. The head antenna also has communications and radar search functions, as well as the black box for quantum communication linkage with Veda (the Celestial Being's quantum computing system). The rest of the Gundams' humanoid head unit also contain systems responsible for controlling the entire body, much like a human's head. On a side note, the Exia's head is designed to look like the helmet of the pilot suit worn by the Gundam Meisters in AD 2307-2308 to express the belief of “Meister = Gundam”.While the GN Drive can produce GN Particles endlessly, even when the Gundams are inactive, there is a limit to the amount that could be instantaneously produced. Thus, continuous or heavy usage of beam weapons and other GN Particles consuming systems might cause the Gundams to run out of particles. To avoid this, the Gundams have GN Condensers in various body parts to store excess GN Particles. For maintenance purposes, the condensers can display the particles' compression rate and the amount stored. During mission, this display function is used for transmitting coded messages to allied units. On the matter of GN Drives, Celestial Being only created five units as that was deemed to be the minimum needed for armed interventions. The low number is not only due to difficulties in manufacturing the GN Drive, which requires Jupiter's high gravity environment, but also because having more GN Drives would increase the risk of them falling into the enemy's hands.The Gundam Exia is nicknamed “Gundam Seven Swords” as its development code was “Seven Swords”, and as indicated by this name, it is equipped with a total of seven blades to meet the needs of the moment during combat. Of these seven, the GN Sword, GN Long Blade, GN Short Blade are physical blades, while the rest are beam-based and consisted of two GN Beam Sabers and two GN Beam Daggers. The GN Sword serves as the primary weapon and due to its low energy consumption, the Exia has an advantage in prolonged combat, which mainly occurs when fighting ace pilots or when subjected to traps such as the three major bloc's joint military exercise. The three physical blades also serve as countermeasures against GN Field, a protective barrier made of GN Particles. In other words, Exia is also intended to fight against Gundam/GN Drive-equipped machine that is piloted by a betrayer or captured by the enemy and used against Celestial Being. Early on, an alternate configuration of the GN-005 Gundam Virtue also had an anti-betrayer role, but its design was dropped and this increased the responsibilities placed on Exia and its Gundam Meister.Other armaments include a GN Shield for defense that also provides protection to the internal structures and joints that might be exposed during movements. The GN Shield is usually in a compact size to maintain Exia's range of articulations, but can expand to increase the defensive area when needed. Similarly, the GN Sword, can fold its blade and has a Rifle Mode for ranged combat. The last of Exia's armament is another ranged weapon in the form of a pair of low-power GN Vulcans mounted in the forearms. During battles, the Exia gloriously sliced through its opponents in close combat, leaving a powerful impression on those who witnessed it and contributing greatly to the instillment of a "fear of Gundams" in the world. This was already anticipated by Celestial Being, and it is because of this that the organization's tactical forecaster, Sumeragi Lee Noriega, selected the Exia to intervene in the AEU-09 AEU Enact's presentation ceremony, which became the unveiling of the paramilitary organization.The Gundam Exia has an "Over Boost Mode" that temporarily boosts its GN Drive's performance and thus increase the mobile suit's capabilities. During an emergency, the Exia can activate a special "Trans-Am System" that enhances its thrust and defensive capabilities, as well as increase its output to three times that of its normal specifications for a limited period of time. This system also causes the Gundam to glow red, but it is a double-edged sword as Exia's performance will drop dramatically once it ends. A number of additional optional equipment was also developed for Exia, such as the high mobility Avalanche Unit and the GNR-001E GN Arms Type-E support machine. When equipped with the Avalanche Unit, the Exia becomes the GN-001/hs-A01 Gundam Avalanche Exia and can speed past specialized high-speed mobile suits, which it normally cannot do despite having remarkable mobility. When docked with the GN Arms Type-E, the Exia becomes the GN-001+GNR-001E GN Armor Type-E, obtaining better mobility, offensive and defensive capabilities.

The MSN-04 Sazabi is a mobile suit introduced in Mobile Suit Gundam: Char's Counterattack. It is piloted by Char Aznable.

The RX-0 Unicorn Gundam (ユニコーン ガンダム Yunikōn Gandamu?, or Unicorn, Unicorn Gundam 01, Singularity One) is the titular prototype mobile suit of the Mobile Suit Gundam Unicorn novel, its OVA adaptation and the television re-cut. Developed by Anaheim Electronics for the Earth Federation, it concealed a secret that could shake the future of all humanity, for it was the key to opening Laplace's Box. It is piloted by Banagher Links after the head of the Vist Foundation and his father, Cardeas Vist, entrusted it to him at the dawn of the Third Neo Zeon War in U.C. 0096.

The BB Senshi #297 SD Stargazer Gundam is a Super Deformed (SD) model kit by Bandai, representing the GSX-401FW Stargazer Gundam from the "Gundam SEED Stargazer" series. This kit features: Molded-in color parts for an accurate finish without the need for painting. Snap-fit assembly, suitable for modelers of all skill levels. Articulated joints allowing for a range of poses. Accessories including the Beam Shield and Beam Rifle. Once assembled, the model stands approximately 8 cm tall, making it a charming addition to any Gundam collection.

The HaroPla #12 Haro Basic Green Model Kit is a delightful addition to Bandai's HaroPla series, featuring the iconic Haro from the Mobile Suit Gundam franchise. This enhanced version allows builders to recreate Haro with expressive features and interactive components. Key Features: Size: Approximately 1.77 inches (4.5 cm) tall upon completion. Design Details: Features an opening mouth that reveals molded keyboard details, adding depth to Haro's expressive design. Articulation: Includes limb parts, allowing for display with unfolded arms and legs, enhancing poseability. Accessories: Comes with a pedestal stand that doubles as storage space for unused limb parts, ensuring a tidy display. Assembly: Snap-fit assembly requires no glue or paint, making it suitable for builders of all skill levels. Release Information: Released in 2019, this model kit is part of Bandai Spirits' HaroPla lineup, offering fans a fun and accessible way to build and display the beloved Haro character. The HaroPla #12 Haro Basic Green Model Kit is a perfect addition for Gundam enthusiasts and model kit collectors, providing a charming and interactive build experience.

The BB Senshi #380 Unicorn Gundam 02 Banshee is a Super Deformed (SD) model kit that offers a compact and stylized rendition of the formidable Unicorn Gundam 02 Banshee from the Mobile Suit Gundam Unicorn series. This kit provides an engaging building experience, capturing the essence of the mobile suit's unique design in a charming SD format. Key Features: Scale and Materials: Non-scale model kit crafted from high-quality injection-molded plastic, ensuring durability and ease of assembly. Articulation: Features multiple points of articulation, allowing for expressive poses that showcase its dynamic design. Transformation Capability: Capable of transforming between Unicorn Mode and Destroy Mode, replicating the mobile suit's iconic feature from the series. Weaponry and Accessories: Equipped with Armed Armor VN and Armed Armor BS, providing a comprehensive arsenal for dynamic display options. Design Details: Reproduces the psycho-frame exposure with new leg parts, enhancing the visual appeal in Destroy Mode. Release Information: Released in March 2013 as part of Bandai's BB Senshi line, this kit brings the Unicorn Gundam 02 Banshee to life in a distinctive SD style, appealing to both collectors and builders. The BB Senshi #380 Unicorn Gundam 02 Banshee is an excellent addition for fans of the Gundam Unicorn series and SD model enthusiasts, offering both a rewarding build and a unique display piece.

The LEGEND BB #377 Musha Godmaru is a Super Deformed (SD) model kit that brings a unique samurai-inspired aesthetic to the Gundam universe. This kit offers a delightful building experience, combining traditional Gundam design elements with feudal Japanese warrior motifs. Key Features: Scale and Materials: Non-scale model kit crafted from high-quality injection-molded plastic, ensuring durability and ease of assembly. Articulation: Features multiple points of articulation, allowing for expressive poses that showcase its samurai armor and weaponry. Weaponry and Accessories: Equipped with a naginata, katana (Bukyuumaru), and a Tanegashima rifle, providing a comprehensive arsenal for dynamic display options. Design Details: Incorporates samurai armor elements, including a kabuto-style helmet and traditional weaponry, blending Gundam mechanics with historical Japanese warrior aesthetics. Release Information: Released in July 2012 as part of Bandai's LEGEND BB series, this kit revitalizes classic SD Gundam designs with modern engineering and enhanced detail. The LEGEND BB #377 Musha Godmaru is an excellent addition for collectors and builders who appreciate the fusion of Gundam's futuristic design with traditional samurai elements, offering both a rewarding build and a distinctive display piece.

SD BB Senshi #238 Gogg & Acguy & Zock

A new form that Guan Yu has achieved by mastering combat. He swings the enlarged and enhanced Seiryuengetsuto in battle, cutting down enemies from beyond their reach.