Tools

Model: MSF-13 Size: 90x13x3mm Material: Tempered Glass Excellent handling and buffing abilities. The buffing results are equivalent to polishing with #10,000~#12,000 grit sandpapers or buffing with a polishing compound. Made with tempered glass. Can be washed with water with no concern of corrosion. * comes with a plastic protection box.  * do not drop this item as it may shatter. always put the item back into its protection box after use * not intended for polishing metal materials

This brings out a realistic felling better than a painted top coat. Mr.TOP COAT can be applied over slide marks(decals) without blemishes. A good way to eliminate differences between the paints and the slide marks is making the model surface smoother. important shipping infoCan only ship via ground transport. No overseas shipping, no express shipping.

Micro Sol setting solution is for the most difficult irregular surfaces to be found on models. It completely softens the Microscale Decal, allowing it to drape down onto the surface of the model, conforming perfectly to surface irregularities without distortion. The most amazing results in seemingly impossible places are possible because Micro Sol actually makes the decal part of the painted surface. For that reason, you should coat Micro Sol on for only a few seconds and then leave it alone. It does the work. Do not touch until the decal has dried, as the decal is very soft at this stage and could be easily damaged. For the best results, first, apply Micro Sol to prepare the surface and enhance the adhesive. Make sure the surface is free of particles that could get under the decal's film and cause a blemish. Then, when everything is dry enough that the decal will not move easily, apply Micro Sol with a small flat brush. Apply with as few strokes as possible so as not to disturb the decal. Then allow the decal to dry without disturbing it. One application is enough in most cases but, if necessary, a second application of Micro Sol can be helpful.

Micro Set is a very versatile decal setting solution that does several things to Microscale Decals to improve the application. Micro Set should be applied to the surface of the model where you will be sliding the decal off the paper backing. Micro Set prepares the surface with special wetting agents that cut the oils into new paint and convert the adhesive on the back of the decal to a stronger and longer-lasting one. In addition, Micro Set slightly softens the decal film to make it more flexible so that it will conform better to the model's surface. Better adhesion of the decal to the model prevents tiny air bubbles from forming and results in an invisible carrier film for the so-called "painted-on look." To apply Micro Set: Use a soft flat artist's brush and apply Micro Set where you are going to apply the decal. Then slide the decal off the backing paper using a small pointed tip synthetic bristle brush to carefully position the decal in its proper position. Blot the decal carefully with a tissue or paper toweling, being careful not to disturb its position. Allow the decal to dry overnight. It will then be ready for a protective coat of Micro Coat Flat, Satin, or Gloss.

The “Semi-Gloss type” has been added to the widely popular Aqueous color “Premium” series. The thickness of the resin and the transparency have been further developed, and the coating strength has been improved, so the surface will not be damaged by scratches easily. Mr.Top Coat can be applied over slide marks(decals) without blemishes. A good way to eliminate differences between the paints and the slide marks is to make the model surface smoother.・Can be applied over Mr.Color, water-based hobby colors, and enamel paints.・Can be used for painting that begins over slide marks.・Using Mr.Color or Mr.Super Clear over Mr.Top Coat will cause it to dissolve. important shipping infoCan only ship via ground transport. No overseas shipping, no express shipping.

Mr.Mark Softer is a softening agent designed to be used with decals (slide marks). It enables decals to conform to rough and curved surfaces.How To Use Mr.Mark SofterFirst, apply a small drop of Mr.Mark Softer to the area where the decal will go using the brush attached to the bottle cap.Apply the decal over this area. Apply gentle pressure to the decal with a soft cloth, removing any excess liquid and ensuring that the decal is down fast.The decal will stick perfectly, even on uneven or curved surfaces.If air bubbles do get in between the decal and the model surface, allow the decal to dry, and then carefully prick the decal with a needle and insert Mr.Mark Softer through the resulting hole. The air will escape, and the decal will then stick down conforming to the surface of the plastic part.

Mr.Masking Sol is a special liquid gum that's different than other types of masking solutions. It dries smooth and is easy to peel after the painting is finished.  This new masking sol prevents paint absorption when applying masking solution over a large area and when airbrushing.

Attached to a flexible sponge base, the abrasive coat of this sanding sheet is well-suited to removing protrusions on plastic models and also finishing materials such as wood and metal. The sponge's flexibility allows even finishing of curved surfaces and hard-to-reach corners. This item can be easily cut into the desired shape/size using a modeling knife. Suitable for wet sanding use. Abrasive material: Aluminum oxide Grit size: equivalent to #800-#1000 Sponge thickness: 5mm

Attached to a flexible sponge base, the abrasive coat of this sanding sheet is well-suited to removing protrusions on plastic models and also finishing materials such as wood and metal. The sponge's flexibility allows even finishing of curved surfaces and hard-to-reach corners. This item can be easily cut into the desired shape/size using a modeling knife. Suitable for wet sanding use. Abrasive material: Aluminum oxide Grit size: equivalent to #500-#600 Sponge thickness: 5mm

The Bandai Spirits Model Sanding Stick Set (Mini) is an official hobby tool designed for sanding and finishing plastic model kits, Gunpla builds, and other scale modeling projects. Each mini-sized stick file features a multi-layered flexible structure that conforms to part surfaces, making it ideal for smoothing nub marks, seam lines, and surface imperfections. This set is suitable for builders of all skill levels, from beginners assembling their first Entry Grade kit to experienced modelers refining Master Grade builds.Key Features Three Grit Levels: Includes #400 (coarse), #600 (medium), and #1000 (fine) grit sanding sticks for progressive surface finishing Color-Coded Identification: Each grit level has a distinct color on the side of the stick - #400 (Red), #600 (Blue), #1000 (White) - for quick identification Multi-Layered Flexible Structure: The layered construction provides moderate flexibility, allowing the sanding surface to conform to curved and flat parts Mini Size: Compact stick design fits comfortably in hand and allows access to small and detailed areas on model kits Versatile Application: Suitable for Gunpla, scale models, 3D prints, miniatures, and other plastic hobby projects 9-Piece Set: Three sticks of each grit type provide ample supply for extended use Included Equipment and Accessories 3x #400 Grit Mini Sanding Sticks (Red) 3x #600 Grit Mini Sanding Sticks (Blue) 3x #1000 Grit Mini Sanding Sticks (White) Specifications Brand Bandai Spirits Product Type Hobby Tool - Sanding Stick File Set Product Line Bandai Spirits Model Tools Size Mini Grit Types #400, #600, #1000 Total Pieces 9 Package Dimensions 13.5 x 5 x 1.2 cm Package Weight 20g Bandai SKU 2569559 UPC 4573102620040 Country of Origin Japan Release Date March 2022

The Bandai Spirits Model Sanding Stick Set is an official hobby tool from the Bandai Spirits Tool series, designed for sanding and finishing plastic model kits. The set includes three stick-type sanding files in #400, #600, and #1000 grits, covering coarse shaping through fine polishing. These sanding sticks are ideal for beginners and experienced builders alike, perfect for cleaning nub marks, smoothing seam lines, and preparing surfaces on Gunpla and other plastic model kits.Key Features Three Grit Levels: Includes #400 (coarse), #600 (medium), and #1000 (fine) sanding sticks for progressive surface finishing Multi-Layer Flexible Structure: The multi-layered construction provides moderate flexibility, conforming to curved and flat surfaces during filing work Color-Coded Identification: Each stick features a different color on the side corresponding to its grit level for quick and easy selection Double-Sided Design: Each sanding stick has abrasive material on both sides for extended usability Ergonomic Stick Form Factor: The stick shape fits comfortably in the hand, providing precise control for sanding small and large areas Official Bandai Spirits Tool: Part of the Bandai Spirits official tool lineup designed specifically for plastic model kit building Included Equipment and Accessories #400 Grit Sanding Stick x 1 #600 Grit Sanding Stick x 1 #1000 Grit Sanding Stick x 1 Specifications Brand Bandai Spirits Line Bandai Spirits Tools Product Type Hobby Tool - Sanding Stick Set Grit Types #400, #600, #1000 Quantity 3 Sanding Sticks Bandai SKU 5062003 UPC 4573102620033 Country of Origin Japan

Can be used wet or dry. Can be cut and shaped to fit the specific area as needed to achieve the finest finish possible on plastic or resin parts. Contains 5  Sanding Sticks Course Medium Fine Extra Fine Tri-grit