COLLECTIONS
Active Filters
Availability
Price
Products
Mr. Hobby | Mr. Super Clear UV Cut Matt Spray 170ml
Mr. Hobby
$14.00 $13.25Many modelers have had the experience of not only direct ultraviolet light from the sun but also indoor sources such as fluorescent light fading the paint on their projects. Mr. SUPER CLEAR UV CUT series is special clear coating that reduces the effects of ultraviolet light. Use this coating to preserve your long hours of painting. (This product is made especially for the Mr. Color series and cannot be used over water-based paints and decals.) important shipping infoCan only ship via ground transport. No overseas shipping, no express shipping.
Mr. Hobby | MR.CEMENT DELUXE 40ml
Mr. Hobby
$6.00 $4.00Mr. Cement is a high quality adhesive suitable for your model kits. It is the best choice when gluing together styrene plastic model kit parts. Each bottle contains a handy application brush inside the bottle cap. MC124 and MC127 contain the same cement, but MC124 contains 25ml and MC127 contains 40ml.
Mr. Hobby | MR.CEMENT S ("BRUSH ON" TYPE) 40ml
Mr. Hobby
$6.00 $4.10Mr. Cement S is a "BRUSH ON" type low viscosity cement. It dries faster than MC124/MC127 Mr. Cement, so it is suitable for attaching fragile pastic parts together quickly. You must put together the plastic parts, and then brush on this cement on the gap between the two parts.
MS General 1/10 Seven Deadly Sins Sloth & Rhino Full Set Model Kit
MS General
$200.00MS General 1/10 Seven Deadly Sins – Sloth & Rhino Full Set Model Kit This MS General 1/10 Seven Deadly Sins Sloth Full Set includes both the Sloth figure and her large mechanical Rhino support unit. As a third party Gundam Gunpla-like mecha model kit, the set combines stylized character design with a heavy mechanized companion, offering a standout build for hobbyists seeking a larger and more dynamic display piece. Product Highlights Full set: includes Sloth figure and her Rhino mechanical partner 1/10 scale third party mecha model kit with character and mech build components Highly articulated Sloth figure with armor and mechanical accessories Large Rhino mecha unit capable of multiple poses and support functions ABS and PVC molded parts designed for durability and display Color-molded parts reduce the need for painting Description The Sloth & Rhino Full Set from MS General’s Seven Deadly Sins lineup provides both a detailed figure build and a substantial mechanical companion. Sloth features expressive armor styling, multiple articulation points, and interchangeable mechanical components, while the Rhino unit serves as a fully poseable support mecha with a powerful armored presence. Designed for builders who enjoy character-and-mech pairings, this set offers a balanced combination of stylized figure modeling and heavy mechanical construction, making it ideal for prominent display or customization. Box Contents Sloth figure model kit Mechanical Rhino full build unit Armor parts and mechanical attachments Interchangeable hand parts Weapon and accessory components Instruction manual Specifications Brand MS General Series Seven Deadly Sins Set Includes Sloth figure + Rhino mecha Scale 1/10 Materials PVC, ABS Figure Height Approx. 16 cm Companion Mech Fully poseable Rhino unit
Nuke Matrix 1/12 Cyber Forest Fantasy Girls Shadow: Yefuna Malkina
Nuke Matrix
$80.00Official Nuke Matrix Retailer LA Scale Model is an authorized retailer of Nuke Matrix All Nuke Matrix model kits are 100% genuine and sourced directly from the manufacturer. Nuke Matrix 1/12 Cyber Forest Fantasy Girls Shadow: Yefuna Malkina The Nuke Matrix 1/12 Cyber Forest Fantasy Girls Shadow: Yefuna Malkina is a third-party mecha-girl model kit combining articulated mechanical build with stylized figure design. Once assembled, the kit offers high poseability, multiple accessories, and versatile customization — a standout addition for collectors of original-IP mecha kits. Product Highlights 1/12 scale mecha-girl model kit from Nuke Matrix’s Cyber Forest Fantasy Girls lineup Fully articulated build for dynamic posing and display Includes a variety of weapons and accessories for customization and combat-style display Color-separated plastic parts for clean build appearance Designed for hobby builders and mecha-girl collectors seeking flexibility and style Box Contents Yefuna Malkina main body and mechanical parts Weapon and accessory set (as included in standard Shadow kit) Decal / sticker sheet Instruction manual Description Shadow: Yefuna Malkina merges mechanical aesthetics with a mecha-girl character design. The kit’s articulation and accessory load allow for a wide range of dynamic poses — from relaxed stances to combat-ready configurations. With its balance of character styling, mechanical detail, and build flexibility, this model kit suits both display-oriented collectors and customizers who enjoy customizing loadouts and poses. Specifications Brand Nuke Matrix Series Cyber Forest Fantasy Girls – Shadow Model Yefuna Malkina Scale 1/12 Kit Type Third-party mecha-girl model kit Material Plastic (color-separated runners) Articulation Full articulation (arms, legs, waist, etc.)
Nuke Matrix Cyber Forest Fantasy Girls B.A.T. Sonic Blast Attacker Maria Strauss 1/12 Scale Model Kit
Nuke Matrix
$60.00Official Nuke Matrix Retailer LA Scale Model is an authorized retailer of Nuke Matrix All Nuke Matrix model kits are 100% genuine and sourced directly from the manufacturer. Nuke Matrix 1/12 Cyber Forest Fantasy Girls – B.A.T. Sonic Blast Attacker Maria Strauss The Nuke Matrix 1/12 Cyber Forest Fantasy Girls B.A.T. Sonic Blast Attacker Maria Strauss is a third party mecha-girl model kit combining stylish character design with mechanical components and dynamic equipment. As part of the Cyber Forest Fantasy Girls series, this kit emphasizes articulation, accessory variety, and display versatility. Product Highlights 1/12 scale mecha-girl kit from the Cyber Forest Fantasy Girls line Fully articulated body frame suitable for dynamic posing Includes sonic-themed weapon equipment and mechanical parts Winged or booster-style back equipment for aerial-style display options Color-separated runner design for clean assembly with optional painting Multiple expressive face options and interchangeable hands Includes display stand for stable posing Description Maria Strauss appears in the B.A.T. (Sonic Blast Attacker) configuration, equipped with sound- or pulse-themed armaments and mechanical attachment parts that support various attack stances. Her articulated frame enables a wide range of expressive poses, while color-separated runners ensure a visually appealing build straight from the box. The combination of character styling, mechanical wings or boosters, and unique sonic elements makes Maria Strauss a standout figure in the Cyber Forest Fantasy Girls lineup, especially for collectors who enjoy display-focused builds with personality and flair. Box Contents Maria Strauss main body parts Mechanical equipment set (B.A.T. configuration) Back-mounted wing/booster components Sonic or pulse-style weapon accessories Interchangeable hands Multiple face plates Display base and stand arm Decal sheet Instruction manual Specifications Brand Nuke Matrix Series Cyber Forest Fantasy Girls Model B.A.T. Sonic Blast Attacker: Maria Strauss Scale 1/12 Material Color-separated plastic runners Articulation Full articulated frame Accessories Weapon set, wing/booster parts, faces, hands, stand
One Piece Grand Ship Collection #04 Red Force Model Kit
Bandai
$20.00The One Piece Grand Ship Collection #04 Red Force Model Kit by Bandai brings to life the iconic flagship of the Red Hair Pirates, captained by Shanks, from the renowned anime and manga series One Piece. This model kit is designed for both beginners and seasoned modelers, offering a detailed and faithful representation of the Red Force. Key Features: Scale: Non-scale model, approximately 5 inches (130mm) in length upon completion. Assembly: Snap-fit assembly requires no glue or tools, with pre-colored plastic parts eliminating the need for painting. Stickers are included for accurate markings and details. Display Options: Features an ocean surface effect part and a display base, allowing for dynamic presentation of the ship as if sailing through the seas. Accessories: Includes: Sea level effect parts Display base Stickers for detailed markings Instruction manual Design Details: Accurately replicates the Red Force's distinctive red hull and pirate emblem, capturing the essence of the ship as seen in the series. Release Information: Originally released in April 2012, this model kit is part of Bandai's Grand Ship Collection, which features various notable ships from the One Piece universe. The One Piece Grand Ship Collection #04 Red Force Model Kit is a must-have for fans of the series and model kit enthusiasts, offering an enjoyable building experience and a striking display piece.
One Piece Grand Ship Collection Garp's Warship
Bandai
$22.00Former Vice Admiral Monkey D. Garp's ship is a battleship-class vessel. His ship's crow nests are shaped like a dog house and the figurehead is shaped like a dog head, which has a bone in its mouth. There are many sails for this ship, with the masts shaped like bones with dog-paws. The overall vessel has a dog theme, similar to Garp's mask. One of the major front sails bears the marking HQ-03 under the marine markings.There are conveyor belts on board the ship to supply Garp with cannonballs, which, when launched with Garp's superhuman strength, surpasses the force of a cannon. He can also hurl a gigantic ball and chain that is bigger than the Thousand Sunny, although it is unknown how the ship can transport it. A big staircase leads up to the figurehead of the ship, as it doubles as a launching platform for Garp's hand-thrown cannonball barrage, and thus the ship has no front cannons. It first appeared in Chapter 91 and Episode 68. It was once seen parked outside Dawn Island. Later, Garp used the ship on his way to Hachinosu to rescue Koby from the Blackbeard Pirates.The ship made an appearance in One Piece Film: Z.
One Piece Grand Ship Collection Going Merry
Bandai
$20.00The Going Merry was the first full-sized ship owned by the Straw Hat Pirates, a caravel that served as their main transportation through the East Blue, and the Grand Line up until Water 7. It was often affectionally referred to as simply Merry (メリー, Merī?) by the crew.Originally designed by Kaya's servant Merry, it was gifted to the Straw Hats for defending Syrup Village against the Black Cat Pirates. Over time, it came to be loved by the crew as a home and as a friend, so much so that she eventually developed a life of her own and became a genuine crew member. Unfortunately, the Going Merry took an inordinate amount of damage during her "lifetime", being blown up, impaled, sliced up multiple times, and partially eaten by Wapol. Eventually, the Merry could no longer continue and after helping the Straw Hats escape Enies Lobby, it received a Viking funeral.After its destruction, the Merry was succeeded by the Thousand Sunny, a ship specially built by Franky (and the Galley-La Company) to maintain the "soul" of its predecessor.
One Piece Grand Ship Collection Going Merry
Bandai
$47.00The Going Merry was the first full-sized ship owned by the Straw Hat Pirates, a caravel that served as their main transportation through the East Blue, and the Grand Line up until Water 7. It was often affectionally referred to as simply Merry (メリー, Merī?) by the crew. Originally designed by Kaya's servant Merry, it was gifted to the Straw Hats for defending Syrup Village against the Black Cat Pirates. Over time, it came to be loved by the crew as a home and as a friend, so much so that she eventually developed a life of her own and became a genuine crew member. Unfortunately, the Going Merry took an inordinate amount of damage during her "lifetime", being blown up, impaled, sliced up multiple times, and partially eaten by Wapol. Eventually, the Merry could no longer continue and after helping the Straw Hats escape Enies Lobby, it received a Viking funeral. After destruction, the Merry was succeeded by the Thousand Sunny, a ship specially built by Franky (and the Galley-La Company) to maintain the "soul" of its predecessor.
One Piece Grand Ship Collection Marine Ship
Bandai
$22.00Marine Ships[1] are ships that serve the Marines, acting as their transportation and means of fighting naval warfare.They have two to four masts with two to three sails per mast. The decorations and paint job is always kept within the same style and there is little variation between ships beyond size and armaments. The standard paint covering the outer hull is normally a greenish-blue basis, patterned with darker streaks of the same, a style also found on the exterior of most Marine bases. Superstructures are usually painted black. Only a few notable Marines have ships that do not follow the standard design and paint job.Marine ships are among the few vessels in the world that can safely traverse the Calm Belt. The two features that make this possible are Seastone, which lines the bottom of the ships and makes them undetectable by Sea Kings, and paddle-wheels, which propels the ship forward despite a complete lack of wind. Only battleships have been seen with these features.
One Piece Grand Ship Collection Moby Dick
Bandai
$20.00Moby Dick was the Whitebeard Pirates' main flagship. Its name was revealed in the third databook.
One Piece Grand Ship Collection Oro Jackson
Bandai
$28.00The Oro Jackson was the ship built by Tom for Gol D. Roger and the Roger Pirates.[1] It is the only known ship that has sailed to the end of the Grand Line.
One Piece Grand Ship Collection Thousand Sunny Flying Model
Bandai
$30.00The Thousand Sunny is the second ship of the Straw Hat Pirates, built after the Going Merry was destroyed. It is often referred to as Sunny (サニー, Sanī?) by the crew.
Orange Cat Industry - Exceed-Type Cassowary Unit 02
Orange Cat Industry
$60.00The second addition to the "Exceed-Type" humanoid mobile weapon series, Cassowary Unit 02, is here! Featuring a bold red color scheme, this dynamic and powerful model showcases precision engineering and a striking design, making it a must-have for fans and collectors. Key Features: Refined Visual Details:Pre-painted parts, including detailed head components, offer a polished and professional look right out of the box. Builders can achieve results that closely match the concept art without additional painting. Clean and Seamless Assembly:Designed with precision engineering to minimize visible seam lines, ensuring a smooth and polished finish. Official product images showcase the unpainted build, highlighting its superior quality. Custom Water Decals:Includes high-quality water decals to enhance detail and realism, elevating the final product to a professional level. Expanded Weapon Set:Comes equipped with a versatile array of weapons for action-packed poses and customization: Shotgun Gatling Gun with a 360° rotatable barrel Heavy Shield with a rotatable attachment Combat KnifeThe heavy shield can also detach to serve as a standalone support for the Gatling Gun, enabling dynamic display options.
Orange Cat Industry B-Robo Kabutack Qosmos Kabutack & Kuwagiro
Orange Cat Industry
$42.00Estimated Delivery for 1st Batch: Early August 2023 Based on the television series, Orange Cat Industry is bringing to you a new model kit set of two characters based on the B-Robo Kabutack television series, Kabutack and Kuwagiro! No tools, glue, or paint are necessary for assembling the kit. Update: This kit has arrived and is ready to ship from LA.
PG 1/60 Perfect Grade GN-0000+GNR-010 00 Raiser
Bandai
$326.00The GN-0000+GNR-010 00 Raiser (aka 00 Raiser) is the combined form of GN-0000 00 Gundam and GNR-010 0 Raiser in season 2 of Mobile Suit Gundam 00. Setsuna F. Seiei pilots the 00 Gundam and Saji Crossroad pilots the 0 Raiser, however, when combined Setsuna can operate both units himself. Despite its power, the GN-0000 00 Gundam is a highly experimental unit that suffers from power instability issues and so requires constant maintenance and fine-tuning. The Twin Drive System was also a very new technology, requiring the external stabilizing equipment on 00's main support unit, the GNR-010 0 Raiser, to safely execute Trans-Am and fully synchronize the GN Drives. Some data from GN-XXX+GNR-000 Sefer Rasiel was also exploited in its development.When combining is needed, laser guidance sensors would mutually lock onto each other, with a Haro auto-configuring the docking sequence. 0 Raiser's binders detach from the 0 Raiser body and latch onto 00's GN Drives, and its main body combines with the 00 Gundam's backpack, resulting in an angelic-like form. After successful docking, 00 Gundam's system screen(s) reflect the changes to the frame and the Twin Drive's stabilization. Each of 0 Raiser's binders can be mounted with a GN Shield to increase it's defensive capabilities, this form can remain the same even when docked onto 00 Gundam's GN Drive housing units. Without the GN Shields attached, the binders also act as shields themselves, capable of blocking beam shots from GNZ-003 Gadessa's GN Mega Launcher in Trans-Am mode.As the 00 Raiser the Twin Drive reaches 100% synchronization rate, it can achieve GN Particle generation rates far exceeding 300% during Trans-Am(700% during the first dock), and also gains the usage of the Raiser System. These feats allow 00 Raiser to fully harness its massive particle production (too much for the 00's frame to properly handle alone) and perform at peak capacity. While in Trans-Am, 00 Raiser has also been seen utilizing quantum teleportation in a few battles although the specific activation and control mechanism has not been elaborated upon.The Raiser System allows the 00 Raiser to execute powerful attacks such as a massive GN Beam Saber dubbed the "Raiser Sword", allowing for greater close combat abilities, and using Trans-Am mode with even greater power and duration. Originally requiring both of its GN Swords working with the 0 Raiser's binders to produce and control the Raiser Sword, the 00 was later equipped with a GN Sword III. This weapon was capable of harnessing the power of the Raiser System to generate a refined, more controllable version of the Raiser Sword.The power of 00 Raiser is further enhanced with the presence of an Innovator pilot. Once such a being is detected the Twin Drive can execute Trans-Am Burst, a massive flood of purified GN Particles across a massive area. With the Twin Drive's full abilities in constant demand to combat the A-Laws and Innovators, 00 Raiser became the mainstay unit to effectively combat opposing MS. Overall, 00 Raiser is a mobile suit that exceeds the performance of all others, surpassing the very concept of "Gundam".
PG 1/60 Perfect Grade GN-001 Gundam Exia
Bandai
$211.00The GN-001 Gundam Exia (aka Exia, Gundam Seven Swords) is a mobile suit featured in season one of Mobile Suit Gundam 00 and is piloted by Setsuna F. Seiei. Specializing in close combat and armed mainly with melee weapons, the Gundam Exia is one of four Gundams deployed in AD 2307 by the paramilitary organization, Celestial Being, to eliminate world conflicts through armed interventions. To fight against the world with their small numbers and win, these Gundams have overwhelming power and equipped with advanced technology a century ahead of its time. Notably, the semi-perpetual GN Drive mounted in the center of the Gundams provide almost limitless energy and generates special, multifunctional GN Particles. The GN Particles grant outstanding mobility, including independent flight capabilities, and are also utilized for beam weaponry, attitude control, and stealth purposes as the discharged particles can cause electromagnetic interference, leaving conventional communication and radar devices useless. The Gundams also share common aspects with conventional mobile suits, such as the use of E-Carbon for its armor material. However, the Gundams' E-Carbon has higher defensive power due to the use of advanced materials.An example of Exia's overwhelming power is that its output was estimated to be about six times that of the SVMS-01 Union Flag, one of the newest conventional mobile suits at the time. The technical hurdles that had to be overcome to create the powerful Gundams and their GN Drives were high, making their production extremely difficult and caused the Gundams' development to occur in phases. The first generation machine, the GN-000 0 Gundam, established the basic system of a mobile suit powered by a GN Drive, and armed with a beam gun and beam saber. Subsequently, four second generation machines were developed with individual capabilities required for armed intervention, and their data served as a basis for the third generation machines, which included Exia and the other three Gundams deployed in the armed interventions. Specifically, Exia was developed from the GNY-001 Gundam Astraea, a general-purpose mobile suit with human-like movability that was used for testing various weapons, and the two machines have a number of similarities in terms of appearance.The Astraea's movability aspect is particularly appropriate for the Exia, which requires the same range of articulations as the human body due to its close combat specialization. Thus, while the Exia is armed mainly with melee weapons, its basic performance remains that of a general-purpose mobile suit. In fact, Exia is the only Gundam deployed for the armed intervention that has a body structure capable of range of articulations like the human body's, and the omission of such a structure in the other three Gundams is simply because they do not require it as their specialization is in other areas. To achieve its wide range of articulations, Exia has the most complex basic frame out of the four Gundams, its armor is also more minutely segmentalized as well. This armor design however causes some internal structures and the joints to be unprotected during certain poses, lowering Exia's defensive capability. On the other hand, this design does provides better mobility, giving Exia the best projectile evasion capability among the four Gundams.The Exia also has finer attitude control capabilities than the other Gundams, which is beneficial for close combat, and this is related to its GN Cables. The GN Cables, also known as “GN Power Lines”, are the light purple-colored cables running through various parts of the Exia's body and also one of its eye-catching visual features. While these cables are also found on other Gundams, the ones extending from the shoulders to the upper arms are unique to Exia. The cables facilitate the supply of tremendous amount of GN Particles, and thus energy, to each part of the Gundam instantaneously. They are also used for attitude control due to the GN Particles' mass reduction effect, and so, the Exia which has more cables on its exterior than the other Gundams is able to achieve finer control. In terms of defense however, such placements are dangerous, and later in GN-001REII Gundam Exia Repair II, the cables become mostly stowed in the armor.The GN Particles' mass reduction effect also lightens the Gundam, and can be used to alter the mass ratio of various body parts. Due to this latter ability, it is possible to freely control the machine's inertia and turning capabilities when in the air, and for Active Mass Balance Auto-Control (AMBAC) when in space. This also eliminates the need for the legs to "walk” when moving. As for the control of GN Particles, it is largely carried out by the two clavicle antennas on the Gundam's torso. A minor role is played by the third generation Gundams' head antenna, which is experimentally equipped with particle control functions. The head antenna also has communications and radar search functions, as well as the black box for quantum communication linkage with Veda (the Celestial Being's quantum computing system). The rest of the Gundams' humanoid head unit also contain systems responsible for controlling the entire body, much like a human's head. On a side note, the Exia's head is designed to look like the helmet of the pilot suit worn by the Gundam Meisters in AD 2307-2308 to express the belief of “Meister = Gundam”.While the GN Drive can produce GN Particles endlessly, even when the Gundams are inactive, there is a limit to the amount that could be instantaneously produced. Thus, continuous or heavy usage of beam weapons and other GN Particles consuming systems might cause the Gundams to run out of particles. To avoid this, the Gundams have GN Condensers in various body parts to store excess GN Particles. For maintenance purposes, the condensers can display the particles' compression rate and the amount stored. During mission, this display function is used for transmitting coded messages to allied units. On the matter of GN Drives, Celestial Being only created five units as that was deemed to be the minimum needed for armed interventions. The low number is not only due to difficulties in manufacturing the GN Drive, which requires Jupiter's high gravity environment, but also because having more GN Drives would increase the risk of them falling into the enemy's hands.The Gundam Exia is nicknamed “Gundam Seven Swords” as its development code was “Seven Swords”, and as indicated by this name, it is equipped with a total of seven blades to meet the needs of the moment during combat. Of these seven, the GN Sword, GN Long Blade, GN Short Blade are physical blades, while the rest are beam-based and consisted of two GN Beam Sabers and two GN Beam Daggers. The GN Sword serves as the primary weapon and due to its low energy consumption, the Exia has an advantage in prolonged combat, which mainly occurs when fighting ace pilots or when subjected to traps such as the three major bloc's joint military exercise. The three physical blades also serve as countermeasures against GN Field, a protective barrier made of GN Particles. In other words, Exia is also intended to fight against Gundam/GN Drive-equipped machine that is piloted by a betrayer or captured by the enemy and used against Celestial Being. Early on, an alternate configuration of the GN-005 Gundam Virtue also had an anti-betrayer role, but its design was dropped and this increased the responsibilities placed on Exia and its Gundam Meister.Other armaments include a GN Shield for defense that also provides protection to the internal structures and joints that might be exposed during movements. The GN Shield is usually in a compact size to maintain Exia's range of articulations, but can expand to increase the defensive area when needed. Similarly, the GN Sword, can fold its blade and has a Rifle Mode for ranged combat. The last of Exia's armament is another ranged weapon in the form of a pair of low-power GN Vulcans mounted in the forearms. During battles, the Exia gloriously sliced through its opponents in close combat, leaving a powerful impression on those who witnessed it and contributing greatly to the instillment of a "fear of Gundams" in the world. This was already anticipated by Celestial Being, and it is because of this that the organization's tactical forecaster, Sumeragi Lee Noriega, selected the Exia to intervene in the AEU-09 AEU Enact's presentation ceremony, which became the unveiling of the paramilitary organization.The Gundam Exia has an "Over Boost Mode" that temporarily boosts its GN Drive's performance and thus increase the mobile suit's capabilities. During an emergency, the Exia can activate a special "Trans-Am System" that enhances its thrust and defensive capabilities, as well as increase its output to three times that of its normal specifications for a limited period of time. This system also causes the Gundam to glow red, but it is a double-edged sword as Exia's performance will drop dramatically once it ends. A number of additional optional equipment was also developed for Exia, such as the high mobility Avalanche Unit and the GNR-001E GN Arms Type-E support machine. When equipped with the Avalanche Unit, the Exia becomes the GN-001/hs-A01 Gundam Avalanche Exia and can speed past specialized high-speed mobile suits, which it normally cannot do despite having remarkable mobility. When docked with the GN Arms Type-E, the Exia becomes the GN-001+GNR-001E GN Armor Type-E, obtaining better mobility, offensive and defensive capabilities.
PG 1/60 Perfect Grade MBF-02 Strike Rouge + Skygrasper
Bandai
$224.00The MBF-02 Strike Rouge is a mobile suit introduced in the anime Mobile Suit Gundam SEED. It reappeared in the sequel series Mobile Suit Gundam SEED Destiny. Its primary pilot is the Princess of Orb Cagalli Yula Athha. A mobile suit built using spare parts for the GAT-X105 Strike Gundam that were produced while it was repaired at Orb. Strike Rouge is almost an identical copy of the original Strike Gundam and features the same weaponry as well as the ability to use the Striker Packs. The most commonly used Striker Pack is the Aile Striker, other Striker Packs used by the suit include the Integrated Weapons Striker Pack (IWSP) and the Ootori Pack. The main differences between Strike Rouge and Strike is that the former is equipped with an AI support system and a power extender that increase the operational time, and is responsible for the red-shifting of the phase-shifted colors.
PG 1/60 Perfect Grade MBF-P02 Gundam Astray Red Frame
Bandai
$211.00The MBF-P02 Gundam Astray Red Frame is a Mobile Suit in the Gundam SEED Astray series of manga, novel and photonovel. It is piloted by Junk Guild member Lowe Guele. The MBF-P02 Gundam Astray Red Frame is one of five identical prototype mobile suits developed by Orb using stolen data from the Earth Alliance's G Project. Its original concept was to be a MS that could be piloted by Naturals, and it was eventually loaded with an incomplete Natural-use OS. Most of the technology from the G Project is successfully copied with the exception of Phase Shift armor. In its place, the Gundam Astrays' designers made the machines out of a lighter foam metal compound, with minimal armor over the frame. This made the mobile suits lighter and faster than their G Project counterparts. All five prototype Gundam Astrays are also designed with a backpack that can be lowered to the back skirt armor, allowing the mounting of additional equipment on the back.The Red Frame initially had the same armament as the other prototype Gundam Astrays, consisting of two head-mounted "Igelstellung" 75mm multi-barrel CIWS, two backpack-mounted beam sabers for close combat, a Type 71 beam rifle and a physical shield. Red Frame's pilot, Lowe Guele, eventually acquired another armament - the "Gerbera Straight" katana. To wield this katana effectively, the Red Frame's OS was modified. Lowe also created a 150 meter long version of this sword, however it cannot be carried by the Red Frame in its normal configuration. Lowe also designed a set of upgrades for Red Frame, but they are used to repair Gai's damaged MBF-P03 Gundam Astray Blue Frame instead. When there is a need for flight capability, Red Frame can be fitted with the Flight Unit and when it needs to dive underwater, it can use the Salvage Unit. After his return from Mars, Lowe developed the Caletvwlch and the Ddraig Head. The former is a multifunctional handheld equipment, while the latter is a special head unit designed to complement the former.Like other mobile suits that use beam weapons, the Red Frame is equipped with hand plugs to exchange energy with weapons the suit carries. Although considered a misuse of the system, the energy from the hand plug can be manipulated into an energy ball and discharged. This is often used by Lowe as an emergency weapon, for example to temporarily blind enemies. The mysterious organization, Librarian Works, later created a copy of the Red Frame. Known as Replica Red Frame, it has the same capabilities as the real Red Frame.