Beginner Friendly

The GN-001 Gundam Exia (aka Exia, Gundam Seven Swords) is a mobile suit featured in season one of Mobile Suit Gundam 00 and is piloted by Setsuna F. Seiei. Specializing in close combat and armed mainly with melee weapons, the Gundam Exia is one of four Gundams deployed in AD 2307 by the paramilitary organization, Celestial Being, to eliminate world conflicts through armed interventions. To fight against the world with their small numbers and win, these Gundams have overwhelming power and equipped with advanced technology a century ahead of its time. Notably, the semi-perpetual GN Drive mounted in the center of the Gundams provide almost limitless energy and generates special, multifunctional GN Particles. The GN Particles grant outstanding mobility, including independent flight capabilities, and are also utilized for beam weaponry, attitude control, and stealth purposes as the discharged particles can cause electromagnetic interference, leaving conventional communication and radar devices useless. The Gundams also share common aspects with conventional mobile suits, such as the use of E-Carbon for its armor material. However, the Gundams' E-Carbon has higher defensive power due to the use of advanced materials.An example of Exia's overwhelming power is that its output was estimated to be about six times that of the SVMS-01 Union Flag, one of the newest conventional mobile suits at the time. The technical hurdles that had to be overcome to create the powerful Gundams and their GN Drives were high, making their production extremely difficult and caused the Gundams' development to occur in phases. The first generation machine, the GN-000 0 Gundam, established the basic system of a mobile suit powered by a GN Drive, and armed with a beam gun and beam saber. Subsequently, four second generation machines were developed with individual capabilities required for armed intervention, and their data served as a basis for the third generation machines, which included Exia and the other three Gundams deployed in the armed interventions. Specifically, Exia was developed from the GNY-001 Gundam Astraea, a general-purpose mobile suit with human-like movability that was used for testing various weapons, and the two machines have a number of similarities in terms of appearance.The Astraea's movability aspect is particularly appropriate for the Exia, which requires the same range of articulations as the human body due to its close combat specialization. Thus, while the Exia is armed mainly with melee weapons, its basic performance remains that of a general-purpose mobile suit. In fact, Exia is the only Gundam deployed for the armed intervention that has a body structure capable of range of articulations like the human body's, and the omission of such a structure in the other three Gundams is simply because they do not require it as their specialization is in other areas. To achieve its wide range of articulations, Exia has the most complex basic frame out of the four Gundams, its armor is also more minutely segmentalized as well. This armor design however causes some internal structures and the joints to be unprotected during certain poses, lowering Exia's defensive capability. On the other hand, this design does provides better mobility, giving Exia the best projectile evasion capability among the four Gundams.The Exia also has finer attitude control capabilities than the other Gundams, which is beneficial for close combat, and this is related to its GN Cables. The GN Cables, also known as “GN Power Lines”, are the light purple-colored cables running through various parts of the Exia's body and also one of its eye-catching visual features. While these cables are also found on other Gundams, the ones extending from the shoulders to the upper arms are unique to Exia. The cables facilitate the supply of tremendous amount of GN Particles, and thus energy, to each part of the Gundam instantaneously. They are also used for attitude control due to the GN Particles' mass reduction effect, and so, the Exia which has more cables on its exterior than the other Gundams is able to achieve finer control. In terms of defense however, such placements are dangerous, and later in GN-001REII Gundam Exia Repair II, the cables become mostly stowed in the armor.The GN Particles' mass reduction effect also lightens the Gundam, and can be used to alter the mass ratio of various body parts. Due to this latter ability, it is possible to freely control the machine's inertia and turning capabilities when in the air, and for Active Mass Balance Auto-Control (AMBAC) when in space. This also eliminates the need for the legs to "walk” when moving. As for the control of GN Particles, it is largely carried out by the two clavicle antennas on the Gundam's torso. A minor role is played by the third generation Gundams' head antenna, which is experimentally equipped with particle control functions. The head antenna also has communications and radar search functions, as well as the black box for quantum communication linkage with Veda (the Celestial Being's quantum computing system). The rest of the Gundams' humanoid head unit also contain systems responsible for controlling the entire body, much like a human's head. On a side note, the Exia's head is designed to look like the helmet of the pilot suit worn by the Gundam Meisters in AD 2307-2308 to express the belief of “Meister = Gundam”.While the GN Drive can produce GN Particles endlessly, even when the Gundams are inactive, there is a limit to the amount that could be instantaneously produced. Thus, continuous or heavy usage of beam weapons and other GN Particles consuming systems might cause the Gundams to run out of particles. To avoid this, the Gundams have GN Condensers in various body parts to store excess GN Particles. For maintenance purposes, the condensers can display the particles' compression rate and the amount stored. During mission, this display function is used for transmitting coded messages to allied units. On the matter of GN Drives, Celestial Being only created five units as that was deemed to be the minimum needed for armed interventions. The low number is not only due to difficulties in manufacturing the GN Drive, which requires Jupiter's high gravity environment, but also because having more GN Drives would increase the risk of them falling into the enemy's hands.The Gundam Exia is nicknamed “Gundam Seven Swords” as its development code was “Seven Swords”, and as indicated by this name, it is equipped with a total of seven blades to meet the needs of the moment during combat. Of these seven, the GN Sword, GN Long Blade, GN Short Blade are physical blades, while the rest are beam-based and consisted of two GN Beam Sabers and two GN Beam Daggers. The GN Sword serves as the primary weapon and due to its low energy consumption, the Exia has an advantage in prolonged combat, which mainly occurs when fighting ace pilots or when subjected to traps such as the three major bloc's joint military exercise. The three physical blades also serve as countermeasures against GN Field, a protective barrier made of GN Particles. In other words, Exia is also intended to fight against Gundam/GN Drive-equipped machine that is piloted by a betrayer or captured by the enemy and used against Celestial Being. Early on, an alternate configuration of the GN-005 Gundam Virtue also had an anti-betrayer role, but its design was dropped and this increased the responsibilities placed on Exia and its Gundam Meister.Other armaments include a GN Shield for defense that also provides protection to the internal structures and joints that might be exposed during movements. The GN Shield is usually in a compact size to maintain Exia's range of articulations, but can expand to increase the defensive area when needed. Similarly, the GN Sword, can fold its blade and has a Rifle Mode for ranged combat. The last of Exia's armament is another ranged weapon in the form of a pair of low-power GN Vulcans mounted in the forearms. During battles, the Exia gloriously sliced through its opponents in close combat, leaving a powerful impression on those who witnessed it and contributing greatly to the instillment of a "fear of Gundams" in the world. This was already anticipated by Celestial Being, and it is because of this that the organization's tactical forecaster, Sumeragi Lee Noriega, selected the Exia to intervene in the AEU-09 AEU Enact's presentation ceremony, which became the unveiling of the paramilitary organization.The Gundam Exia has an "Over Boost Mode" that temporarily boosts its GN Drive's performance and thus increase the mobile suit's capabilities. During an emergency, the Exia can activate a special "Trans-Am System" that enhances its thrust and defensive capabilities, as well as increase its output to three times that of its normal specifications for a limited period of time. This system also causes the Gundam to glow red, but it is a double-edged sword as Exia's performance will drop dramatically once it ends. A number of additional optional equipment was also developed for Exia, such as the high mobility Avalanche Unit and the GNR-001E GN Arms Type-E support machine. When equipped with the Avalanche Unit, the Exia becomes the GN-001/hs-A01 Gundam Avalanche Exia and can speed past specialized high-speed mobile suits, which it normally cannot do despite having remarkable mobility. When docked with the GN Arms Type-E, the Exia becomes the GN-001+GNR-001E GN Armor Type-E, obtaining better mobility, offensive and defensive capabilities.

The GN-001 Gundam Exia (aka Exia, Gundam Seven Swords) is a mobile suit featured in season one of Mobile Suit Gundam 00 and is piloted by Setsuna F. Seiei. Specializing in close combat and armed mainly with melee weapons, the Gundam Exia is one of four Gundams deployed in AD 2307 by the paramilitary organization, Celestial Being, to eliminate world conflicts through armed interventions. To fight against the world with their small numbers and win, these Gundams have overwhelming power and equipped with advanced technology a century ahead of its time. Notably, the semi-perpetual GN Drive mounted in the center of the Gundams provide almost limitless energy and generates special, multifunctional GN Particles. The GN Particles grant outstanding mobility, including independent flight capabilities, and are also utilized for beam weaponry, attitude control, and stealth purposes as the discharged particles can cause electromagnetic interference, leaving conventional communication and radar devices useless. The Gundams also share common aspects with conventional mobile suits, such as the use of E-Carbon for its armor material. However, the Gundams' E-Carbon has higher defensive power due to the use of advanced materials.An example of Exia's overwhelming power is that its output was estimated to be about six times that of the SVMS-01 Union Flag, one of the newest conventional mobile suits at the time. The technical hurdles that had to be overcome to create the powerful Gundams and their GN Drives were high, making their production extremely difficult and caused the Gundams' development to occur in phases. The first generation machine, the GN-000 0 Gundam, established the basic system of a mobile suit powered by a GN Drive, and armed with a beam gun and beam saber. Subsequently, four second generation machines were developed with individual capabilities required for armed intervention, and their data served as a basis for the third generation machines, which included Exia and the other three Gundams deployed in the armed interventions. Specifically, Exia was developed from the GNY-001 Gundam Astraea, a general-purpose mobile suit with human-like movability that was used for testing various weapons, and the two machines have a number of similarities in terms of appearance.The Astraea's movability aspect is particularly appropriate for the Exia, which requires the same range of articulations as the human body due to its close combat specialization. Thus, while the Exia is armed mainly with melee weapons, its basic performance remains that of a general-purpose mobile suit. In fact, Exia is the only Gundam deployed for the armed intervention that has a body structure capable of range of articulations like the human body's, and the omission of such a structure in the other three Gundams is simply because they do not require it as their specialization is in other areas. To achieve its wide range of articulations, Exia has the most complex basic frame out of the four Gundams, its armor is also more minutely segmentalized as well. This armor design however causes some internal structures and the joints to be unprotected during certain poses, lowering Exia's defensive capability. On the other hand, this design does provides better mobility, giving Exia the best projectile evasion capability among the four Gundams.The Exia also has finer attitude control capabilities than the other Gundams, which is beneficial for close combat, and this is related to its GN Cables. The GN Cables, also known as “GN Power Lines”, are the light purple-colored cables running through various parts of the Exia's body and also one of its eye-catching visual features. While these cables are also found on other Gundams, the ones extending from the shoulders to the upper arms are unique to Exia. The cables facilitate the supply of tremendous amount of GN Particles, and thus energy, to each part of the Gundam instantaneously. They are also used for attitude control due to the GN Particles' mass reduction effect, and so, the Exia which has more cables on its exterior than the other Gundams is able to achieve finer control. In terms of defense however, such placements are dangerous, and later in GN-001REII Gundam Exia Repair II, the cables become mostly stowed in the armor.The GN Particles' mass reduction effect also lightens the Gundam, and can be used to alter the mass ratio of various body parts. Due to this latter ability, it is possible to freely control the machine's inertia and turning capabilities when in the air, and for Active Mass Balance Auto-Control (AMBAC) when in space. This also eliminates the need for the legs to "walk” when moving. As for the control of GN Particles, it is largely carried out by the two clavicle antennas on the Gundam's torso. A minor role is played by the third generation Gundams' head antenna, which is experimentally equipped with particle control functions. The head antenna also has communications and radar search functions, as well as the black box for quantum communication linkage with Veda (the Celestial Being's quantum computing system). The rest of the Gundams' humanoid head unit also contain systems responsible for controlling the entire body, much like a human's head. On a side note, the Exia's head is designed to look like the helmet of the pilot suit worn by the Gundam Meisters in AD 2307-2308 to express the belief of “Meister = Gundam”.While the GN Drive can produce GN Particles endlessly, even when the Gundams are inactive, there is a limit to the amount that could be instantaneously produced. Thus, continuous or heavy usage of beam weapons and other GN Particles consuming systems might cause the Gundams to run out of particles. To avoid this, the Gundams have GN Condensers in various body parts to store excess GN Particles. For maintenance purposes, the condensers can display the particles' compression rate and the amount stored. During mission, this display function is used for transmitting coded messages to allied units. On the matter of GN Drives, Celestial Being only created five units as that was deemed to be the minimum needed for armed interventions. The low number is not only due to difficulties in manufacturing the GN Drive, which requires Jupiter's high gravity environment, but also because having more GN Drives would increase the risk of them falling into the enemy's hands.The Gundam Exia is nicknamed “Gundam Seven Swords” as its development code was “Seven Swords”, and as indicated by this name, it is equipped with a total of seven blades to meet the needs of the moment during combat. Of these seven, the GN Sword, GN Long Blade, GN Short Blade are physical blades, while the rest are beam-based and consisted of two GN Beam Sabers and two GN Beam Daggers. The GN Sword serves as the primary weapon and due to its low energy consumption, the Exia has an advantage in prolonged combat, which mainly occurs when fighting ace pilots or when subjected to traps such as the three major bloc's joint military exercise. The three physical blades also serve as countermeasures against GN Field, a protective barrier made of GN Particles. In other words, Exia is also intended to fight against Gundam/GN Drive-equipped machine that is piloted by a betrayer or captured by the enemy and used against Celestial Being. Early on, an alternate configuration of the GN-005 Gundam Virtue also had an anti-betrayer role, but its design was dropped and this increased the responsibilities placed on Exia and its Gundam Meister.Other armaments include a GN Shield for defense that also provides protection to the internal structures and joints that might be exposed during movements. The GN Shield is usually in a compact size to maintain Exia's range of articulations, but can expand to increase the defensive area when needed. Similarly, the GN Sword, can fold its blade and has a Rifle Mode for ranged combat. The last of Exia's armament is another ranged weapon in the form of a pair of low-power GN Vulcans mounted in the forearms. During battles, the Exia gloriously sliced through its opponents in close combat, leaving a powerful impression on those who witnessed it and contributing greatly to the instillment of a "fear of Gundams" in the world. This was already anticipated by Celestial Being, and it is because of this that the organization's tactical forecaster, Sumeragi Lee Noriega, selected the Exia to intervene in the AEU-09 AEU Enact's presentation ceremony, which became the unveiling of the paramilitary organization.The Gundam Exia has an "Over Boost Mode" that temporarily boosts its GN Drive's performance and thus increase the mobile suit's capabilities. During an emergency, the Exia can activate a special "Trans-Am System" that enhances its thrust and defensive capabilities, as well as increase its output to three times that of its normal specifications for a limited period of time. This system also causes the Gundam to glow red, but it is a double-edged sword as Exia's performance will drop dramatically once it ends. A number of additional optional equipment was also developed for Exia, such as the high mobility Avalanche Unit and the GNR-001E GN Arms Type-E support machine. When equipped with the Avalanche Unit, the Exia becomes the GN-001/hs-A01 Gundam Avalanche Exia and can speed past specialized high-speed mobile suits, which it normally cannot do despite having remarkable mobility. When docked with the GN Arms Type-E, the Exia becomes the GN-001+GNR-001E GN Armor Type-E, obtaining better mobility, offensive and defensive capabilities.

The MSN-04 Sazabi is a mobile suit introduced in Mobile Suit Gundam: Char's Counterattack. It is piloted by Char Aznable. After Char Aznable returned as the leader of his own Neo Zeon faction in U.C. 0093, he ordered his engineers to create a new mobile suit which would fit his piloting skills and Newtype powers. The result was the MSN-04 Sazabi, which was later built by the Luna-based contractor Anaheim Electronics [1][2]. With an overall height of 25.6 meters, the Sazabi is much bigger than most standard mobile suits, but thanks to the use of lightweight armor materials and a great number of thrusters [3] it is much faster and maneuverable than other suits. The suit is armed with an abdomen-mounted scattering mega particle cannon, a beam shot rifle, a pair of beam sabers stored in the arms and a shield with three missiles as well as a beam tomahawk.Because Char is a Newtype, the Sazabi was also equipped with six funnels which the pilot could control through his psycowaves via a Psycommu system. The Sazabi was also the first MS to be equipped with the revolutionary new psycoframe cockpit. This system featured microscopic psycommu receiver circuits installed throughout a mobile suit's internal frame and cockpit walls. These tiny circuits amplify and transmit a Newtype pilot's psycowaves, enabling the mobile suit to respond instantaneously to mental commands.

The SD EX-Standard Wing Gundam Zero EW from Gundam Wing: Endless Waltz is a Super Deformed (SD) model kit that offers a compact and stylized rendition of the iconic mobile suit. This model kit includes: Key Features: Scale and Materials: SD scale model crafted from high-quality plastic, ensuring durability and ease of assembly. Articulation: Despite its SD design, it features enhanced articulation, allowing for dynamic poses, including the iconic Twin Buster Rifle firing stance. Accessories: Equipped with the Twin Buster Rifle, which can separate into two individual rifles, and a beam saber for versatile display options. Design Details: Showcases the distinctive wing units, which can be adjusted for various poses, and is molded in color with foil stickers for added detailing. Release Information: Released in 2015 as part of Bandai's SD EX-Standard line, this kit combines the charm of SD proportions with the intricate design elements of the Wing Gundam Zero EW, making it a delightful addition to any Gunpla collection. The SD EX-Standard Wing Gundam Zero EW is ideal for both beginners and seasoned builders, offering a fun and straightforward assembly process, along with the opportunity to recreate one of the most beloved mobile suits in a unique, stylized form.

Introducing the PG 1/60 Perfect Grade Unleashed RX-78-2 Gundam, a pinnacle of Gunpla engineering that celebrates over four decades of Gundam excellence. This model kit offers an unparalleled building experience, meticulously designed to replicate the iconic RX-78-2 Gundam with exceptional detail and articulation. Key Features: Scale and Detail: At 1/60 scale, this model stands as a testament to precision, featuring intricate internal structures and external armor that mirror the original design. Advanced Articulation: Boasting over 90 points of articulation, including functional pistons and sliding mechanisms, it allows for dynamic and realistic poses. Multi-Material Construction: The kit incorporates diverse materials such as aluminum parts for the head vulcans and backpack verniers, metallic 3D stickers, and photo-etched parts, enhancing both durability and aesthetic appeal. LED Lighting System: Equipped with color-changing LEDs in the head and chest, as well as an LED beam saber, it brings the Gundam to life with various states of combat or maintenance. Note: Requires LR41 batteries (sold separately). Innovative Assembly Process: Designed to emulate the construction of a real robot, the assembly progresses from the internal skeletal frame to the external armor, providing a comprehensive and immersive building experience. Box Contents: RX-78-2 Gundam model parts Shield Two beam sabers Beam rifle LED components Sayla Mass figure Three Amuro Ray figures Magnet set Aluminum parts Stickers Metallic stickers Comprehensive instruction manual This Perfect Grade Unleashed kit is a must-have for both seasoned builders and newcomers, offering a challenging yet rewarding project that culminates in a stunning display piece. Elevate your Gunpla collection with this exceptional model that embodies the spirit and innovation of the Gundam universe.

The RGM-89De Jegan [ECOAS Type] (aka Jegan "Four Eyes") is a special operations mobile suit based on the RGM-89D Jegan for use by ECOAS. It first appeared in the OVA series Mobile Suit Gundam Unicorn. The RGM-89De Jegan [ECOAS Type] is a special version of the RGM-89D Jegan D Type used by the Earth Federation's special task group ECOAS, and are deployed in ECOAS missions that are expected to involve direct combat with mobile suits. It has a special visor and extra chest armor for increased survivability. The ECOAS Type features the same armaments as the normal Jegan, consisting of a beam saber, a beam rifle, a three slot hand grenade rack, and a shield that has two two-tube missile launchers built in. It could also be outfitted with a bazooka for increased firepower and custom units with different weaponry also exist.

The ZGMF-X10A Freedom Gundam (aka Freedom, X10A) is a mobile suit introduced in the anime Mobile Suit Gundam SEED and is piloted by Kira Yamato. One of ZAFT's ZGMF-X series of Gundam units build in C.E. 71 using technology derived from the four captured Alliance's Gundam, the Freedom Gundam has Phase Shift Armor and its armaments include CIWS guns, beam sabers, shield, plasma beam cannons, railguns, and a beam rifle. When the latter three weapons are used simultaneously, the Freedom is said to be in 'Full Burst Mode'. The suit has full flight capabilities in the atmosphere and the back-mounted wings can be deployed in "High Mobility Aerial Tactics (HiMAT) Mode" to enhance its mobility in the atmosphere or in space. It also has an advanced targeting system, the Multi Lock-On System, that allows it to target and fire at multiple enemy units simultaneously. Due to its capabilities and loadout, the suit has a reputation as a specialized 'Mobile Suit Killer', but its high performance resulted in a complicated control system that demands extremely fast reaction speed and spatial awareness from its pilot.When required, the Freedom Gundam can dock with a support unit, the METEOR unit, for heavier firepower and greater speed. The Freedom Gundam has virtually unlimited combat endurance as it is equipped with a Neutron Jammer Canceller and powered by a nuclear reactor. Kira describes the suit as having over four times the power of the GAT-X105 Strike Gundam. However, what this exactly means is unclear. The Freedom Gundam is meant to operate alongside the ZGMF-X09A Justice Gundam, and they are often based on the warship, the FFMH-Y101 Eternal, which is designed specifically to maintain them. Even in CE 73, the suit is still considered by some people, such as Shinn Asuka, as the most powerful mobile suit out there. Overall, it is one of the Clyne Faction's symbols of power, along with the Eternal, the Archangel, and the Justice.

The ZGMF-X20A Strike Freedom Gundam (aka Strike Freedom, Freedom) is the successor of the ZGMF-X10A Freedom Gundam. Introduced in Mobile Suit Gundam SEED Destiny, it is piloted by Kira Yamato. A mobile suit tuned to meet Kira Yamato's needs, the Strike Freedom has Variable Phase Shift armor, and like its predecessor, ZGMF-X10A Freedom Gundam, is primarily armed with powerful ranged weapons. Its armaments include head-mounted CIWS, an abdomen-mounted multi-phase beam cannon, hip-mounted railguns, combine-able beam sabers and beam rifles, DRAGOON pods controlled by the new Super DRAGOON system and beam shields. It is powered by the new Hyper-Deuterion Engine, and is also equipped with the Neutron Jammer Canceler and the Voiture Lumiere propulsion system.Due to Kira's stellar piloting, his mobile suit is rarely hit during combat and thus Strike Freedom's design emphasizes maneuverability over its armor's defensive capabilities, though beam shields were installed as a compensatory defensive measure. As a result, its armor is split into smaller pieces to improve the movement range of the joints (a similar armor-splitting system was also implemented in ZGMF-X42S Destiny Gundam). To compensate for exposing more of its internal parts, the suit's internal skeleton and joints adopted PS armor materials. When these parts phase-shift, they gain strength and near human flexibility. Additionally, excess residual energy within the body can be discharged through the joints' glowing effects.The internal PS armor materials also help to withstand the massive output and Gs caused by the Hyper Deuterion engine and the new propulsion system, playing a role in increasing Strike Freedom's mobility. However, the main contributor to the MS's superior mobility are the mobile weapon wings, which can be deployed in the "High Mobility Aerial Tactics (HiMAT)" Mode to enhance the suit's mobility in the atmosphere or in space. The wings also features a variant of the "Voiture Lumiere" propulsion system, which can generate a visual effect called the "Wings of the Skies" similar to ZGMF-X42S Destiny's Wings of Light and is used as a means of high speed movement.The Strike Freedom's Super DRAGOONs are based on ZAFT's second generation DRAGOON system, with additional unique modifications. Designed for Kira's use, they allow him to hit more targets at once using the Multi Lock-On System and Full Burst Mode as compared to when he was piloting the original Freedom. They also grant Kira the ability to hit the enemy from multiple directions remotely. Like the Freedom, Strike Freedom is designed to operate alongside another mobile suit, in this case, the ZGMF-X19A ∞ Justice Gundam and is stationed on board the warship Eternal. It also has full flight capabilities in the atmosphere and can dock with the METEOR unit to further augment its firepower.

The XXXG-00W0 Wing Gundam Zero (ウイングガンダムゼロ Uingu Gandamu Zero?) (aka Wing Zero, Wing 0, or just Zero) is a mobile suit that appears in Mobile Suit Gundam Wing. Wing Zero was the first Gundam designed by the five engineers who had developed the OZ-00MS Tallgeese. Around A.C. 175, the MS, which was developed as a "weapon" by OZ, began to evolve as an epoch-making mobile weapon based on the Tallgeese (Prototype Leo). Meanwhile, several engineers that were at the core of the Tallgeese development ran away from OZ to develop even higher performance MS. Five of them gathered to develop a MS that would adopt "technology and materials that did not yet exist at that point in time", including "Gundanium", which was a cutting-edge material at that time. Having been developed in light of the Tallgeese's failure, it became a dreadful machine equipped with an interface that transcended the limits of the pilot. That is "Wing Zero", and the material adopted gave it the code name "Gundam". By transforming into Neo Bird Mode, high-speed cruising is possible; in addition, the Twin Buster Rifle has the power to destroy a space colony in a single hit.Wing Zero's head unit is an aggregation of various sensors and head Vulcan Guns are not equipped. Its chest unit is equipped with the main generator and a "ZERO System" built-in type cockpit. The ZERO System also turned out to be what the five engineers feared the most as it forced the pilot to achieve the "perfect victory". The five engineers, harboring a fear of the dimension of Wing Zero's excessive destruction coefficient (in practice, the parts with the required specifications could not have been supplied at that point in time), suspended the machine's development and sealed its design data. In hiding, the five engineers who had returned to their respective base colonies would develop five "Gundams" that could be said to be unique Wing Zero-derived machines. And then in A.C. 195, the seal was broken by Quatre Raberba Winner, one of the five Gundam pilots who had carried out Operation Meteor; and Wing Zero, which had been impossible to build at the time of its design, is born.

The MRX-009 Psycho Gundam (aka Psyco Gundam) is a transformable mobile armor introduced in Mobile Suit Zeta Gundam. Developed by the Earth Federation Forces' Murasame Newtype Lab as a Cyber Newtype-use machine, the Psycho Gundam incorporates several concepts from the MSN-02 Zeong. At 40 meters tall, it is more than twice the size of a regular mobile suit. This is due to the sheer bulk of the Psycommu System, and the addition of features like a Minovsky Craft System, an anti-beam barrier as well as complex transformation mechanisms. Classified as a large Mobile Armor (MA), it can transform into a Mobile Armor mode known as "Mobile Fortress Mode" that is capable of atmospheric flight thanks to the Minovsky Craft System. Plans for a "Mobile Fortress" in the base defense role were drafted after the One Year War.The Psycho Gundam is entirely controlled by the Psycommu System, and as it was designed to be used by Cyber Newtypes, it cannot be handled by normal humans as the psychological burden is tremendous and potentially fatal. The Psycho-Control System allows the pilot to control Psycho Gundam via remote operation when apart. Besides the superb defensive capabilities offered by the anti-beam barrier, the Psycho Gundam also has overwhelming offensive capabilities, and is armed with 3 diffuse beam cannons in its body, 10 beam cannons in its fingers, and 2 small mega beam cannon in the head. Two units were produced in total.

The RX-104FF Penelope (RX-104FF ペーネロペー?) is a mobile suit that appears in the Mobile Suit Gundam Hathaway movie . It was piloted by Lane Aim of the Earth Federation Forces' Circe Unit . In U.C. 0105, in response to Mafty's anti-Federation activities and assassinations of Federation bureaucrats, the Circe Unit was ordered to capture and destroy the members of Mafty. Hathaway's Ξ Gundam and Lane's Penelope, two Gundam-type mobile suits, confronted each other on Earth . The RX-104FF Penelope was a mode where the RX-104 Odysseus Gundam was equipped with the FF (Fixed Flight) unit. It was classified as a fifth-generation MS alongside the RX-105 Ξ Gundam, which was developed around the same time. The MS was unique due to its capability to achieve independent flight and was considered to be an MS that would greatly change the course of mobile suit operations under gravity. These functions largely depended on the FF Unit, while the Ξ Gundam had a different structure that integrated all of the functions into a single MS. In addition to the FF unit, it was said that an optional armament known as the Argos Unit was developed but its details were unknown. It was also said to be equipped with a Psycommu or Quasi-Psycommu unit. The MS was also capable of supersonic flight by deploying a Beam Barrier in its direction of movement, but this required the MS to transform into its Flight Form .

The MSZ-010 ΖΖ Gundam (aka ΖΖ Gundam, ZZ; pronounced "Double Zeta") is the titular mobile suit of the anime Mobile Suit Gundam ZZ and is piloted by Judau Ashta. A direct development of the MSZ-006 Zeta Gundam, the ΖΖ Gundam, which had been completed through a prototype, was given the development code "θ" (thus also known as the "θ Gundam") as it was the sixth "Anaheim Gundam" after the RMS-099 Rick Dias (also known as “γ Gundam”). The development plan of the ΖΖ Gundam existed two years before the completion of the Zeta Gundam but was shelved due to internal competition and production delays. However, the performance advantage of the Zeta Gundam against new Titans mobile suits did not last long, and so development of the ΖΖ Gundam was resumed.The ΖΖ Gundam sought to reproduce the operating functions of the RX-78-2 Gundam and the G-Armor in a single machine. An advanced form of the RX-78-2 Gundam's Core Block System was also introduced. As a result, the ΖΖ Gundam can transform into a mobile armor form called the G-Fortress, which acts as a heavy combat bomber and for cruising in space and on earth. The ΖΖ Gundam can also separate into two independent fighter units, called the Core Top and Core Base. The Core Base, consisting of the ΖΖ's lower body and backpack, is operated through the FXA-07GB Neo Core Fighter attached to its front. The Core Top, consisting of the ΖΖ's upper body and double beam rifle, is operated through the cockpit in its nose unit or more frequently through the Neo Core Fighter, which is in its Core Block form, attached to the lower rear.The team on board the "Argama" typically operates the ΖΖ Gundam with a third Neo Core Fighter piloted by the Gundam's main pilot, Judau Ashta. When combining into the ΖΖ Gundam, forming the G-Fortress mode is the first step and consists of the Core Top and Core Base ejecting their Neo Core Fighters to dock with Judau's Neo Core Fighter in Core Block form. When transforming from the G-Fortress mode to MS mode, the large verniers in the arms and legs are retracted. However, this does not reduce total thrust as the surplus output is supplied to the attitude control thrusters distributed throughout the body and the number of operable thrusters are actually increased. Other parts that move during transformation include the flexible wing binders that also serve as arm-mounted wings shields, the shoulder thruster binders, the large backpack, etc.The engine installed in the backpack is originally meant for ships and could supply power for an entire ship. It also functions as the main thruster unit of the ΖΖ Gundam when in MS form, generating thrust equivalent to that of a large ship. The ΖΖ Gundam's armor is a multi-spaced structure composed of Gundarium γ alloy, capable of withstanding a mobile suit explosion at close range and resisting high water pressure. While it is impossible to completely defend against a direct hit of a mega particle beam, the wings shields are strong enough to prevent a direct hit on the cockpit.With its overall height limited to around 20 meters as requested by AEUG to maintain mobility, the ΖΖ Gundam's design also incorporated the movable frame and magnet coating technology. The generator output which had caused problems during early stages of ΖΖ's development was resolved by incorporating three compact, high-output generators. The movable modules and armor parts, which have a multi-layered structure, are connected by hinges and slide rails which have magnet coating, making them flexible and robust while allowing instantaneous transformation of the ΖΖ Gundam. However, the complexity of the system resulted in poor maintainability and productivity also deteriorated.The control system of the ΖΖ Gundam is equipped with a Bio-Sensor, which is a simplified Psycommu system, as an interface for Newtype pilots. An improved version of the Biosensor installed in the Zeta Gundam, it improves the responsiveness of the mobile suit by supporting the control system with the pilot's brainwaves. However, as a protective measure, the Biosensor is inactive when a pilot with low Newtype abilities boards the ΖΖ Gundam. The unit is mounted in the ΖΖ Gundam's Core Block and the synchronization of the device is improved by inputting the brainwave patterns of the Neo Core Fighter's pilot.The ΖΖ Gundam has a number of powerful weaponry, including two hyper beam sabers which are also usable as beam cannons, a double beam rifle, a 21-tube missile launcher installed on the backpack, and a high mega cannon on the forehead. While the ΖΖ has a very destructive arsenal, its weapons systems require a high level of energy. As a result, the ΖΖ often found itself almost completely drained of power after using its high mega cannon. The ΖΖ Gundam's structural issues due to its complicated construction and transformation systems were eventually corrected with the MSZ-010S Enhanced ZZ Gundam and its massive final upgrade FA-010S Full Armor ZZ Gundam.

The RX-78GP01-Fb Gundam "Zephyranthes" Full Burnern is the upgraded space-use version of the RX-78GP01 Gundam "Zephyranthes". Introduced in the anime OVA series Mobile Suit Gundam 0083: Stardust Memory, it is piloted by Kou Uraki. The RX-78GP01 Gundam "Zephyranthes" was designed to operate in both Earth and Space by using the appropriate Core Fighter and although the space-use unit was ready, the suit was unfortunately wrecked before it could be fitted on. The damaged GP01 was recovered and the engineers of Anaheim Electronics gave it a massive overhaul while repairing it, creating the RX-78GP01-Fb Gundam "Zephyranthes" Full Burnern, which is designed for space combat. The renovation process was completed in two days, with operational testing carried out at Anaheim Electronics's Livermore factory.Its armor is more streamlined for better mobility in space, and thrusters are mounted in the chest, shoulders and legs. The air-intakes on the chest are replaced with reverse thrusters, with the covers expanding during use. The shoulder armor now contains shoulder vernier pods, and added thrusters are attached to the back of the legs and the soles. Propellant tanks are built into the shins to further extend the suit's operating time. The backpack is equipped with built-in generators and also has the most noticeable addition: the two Universal Boost Pods. The Universal Boost Pods allow the Full Burnern to have superior acceleration and mobility when compared to other units at that time. As a result, the pilot has to contend with high G-forces due to overwhelming acceleration.

The RGM-86R GM III is a mass-production general-purpose mobile suit introduced in the anime Mobile Suit Gundam ZZ. Its design was later updated for the novel and OVA Mobile Suit Gundam Unicorn. A mass-produced mobile suit of the Earth Federation Forces developed in accordance with the "GM III Plan" as a successor to the GM II. It was deployed as the main unit during the First Neo Zeon War. By actively introducing new technologies while maintaining productivity, some specs have acquired performance equal to or higher than Gundam Mk-II's. Its backpack is a mass production model of the Gundam MK-II's, and mobility and maneuverability have exceeded the level of existing mass production machines. Although this backpack has a slightly different shape, it maintains the same functions as the Mk-II's while improving cost performance, and the docking mechanism with the FXA-05D G-Defenser remains. The shoulders and waist can be equipped with missile pods and missile launchers, respectively, allowing the GM III to function as an MS for medium- and long-range support.

The LM314V21 Victory 2 Gundam (aka Victory 2, V2) is the successor of the LM312V04 Victory Gundam featured in Mobile Suit Victory Gundam. Its development involves Myra Miggelle, wife of Hangerg Ewin, one of the founding members of League Militaire. It is piloted by Üso Ewin. Developed from the LM312V04 Victory Gundam, the Victory 2 (V2) Gundam was the newest Gundam produced by the League Militaire as their new symbol, replacing the older Victory Gundam. Nevertheless it shared many similarities with its predecessor, most notably the Core Block System, in which the V2's body is consisted of a Core Fighter (also known as V2 Core Fighter) attached to the suit's upper and lower body. This allowed damaged parts to be quickly and easily swapped out in the middle of battle. The V2 Core Fighter can also combined only with the upper body (also known as V2 Top Limb, or "Hanger" as it was informally known) or the lower body (also known as V2 Bottom Limb or "Boots") to form the V2 Top Fighter and the V2 Bottom Fighter respectively.Its armaments were mostly identical to the original Victory as well, although most of its systems were upgraded to better combat the newer mobile weapons being produced by the Zanscare Empire. Like its two predecessors, the V2 could also be outfitted with a variety of equipment to adapt to different mission roles. These upgrades typically saw the V2 outfitted with additional armor or extra weapons (or both).The most important upgrade, however, was the Minovsky Drive System, which was derived from the Victory Gundam's Minovsky Flight System and provided the unit with unparalleled power and maneuverability. This system allowed the V2 to fly in space without the use of conventional rocket thrusters (though some were still incorporated for maneuvering) and achieve incredible speeds. If used on Earth, the Minovsky Drive allowed the V2 to hover in mid-air without additional support, a significant advantage over the beam rotor technology used by Zanscare's mobile suits.The Minovsky Drive can also be used for both offensive and defensive purposes, sometimes simultaneously. The system's high-energy exhaust plumes manifested as a giant pair of wings ("Wings of Light"), which could be used as either gigantic beam sabers or as massive beam shields to shield both the Gundam itself and other targets. The defensive ability of the Wings of Light is nigh-unbreakable, if not absolute: not even the ZMT-S29S Zanneck's beam cannon, which could hit targets on Earth from high in the atmosphere, could penetrate them.

The MS-09 Dom (aka MS-09B Dom) is a mass-production ground combat mobile suit introduced in Mobile Suit Gundam. Its most well known pilots are the Black Tri-Stars. A heavy mobile suit developed by Zimmad, the MS-09 Dom was a ground combat machine equipped with hovercraft technology. It was fitted with thermonuclear jets and rockets under its feet, allowing it to quickly move across the ground, greatly improving its mobility compared to previous ground-use mobile suits. Thanks to sensors located in front of its feet, it was able to traverse uneven terrain. While in cruising mode, it could hover across the ground using only its thermonuclear jets. The Dom can hover at a maximum speed of 381 km/hr for up to 5 hours.Its primary thrusters adopted the Saturn Engine, a type of thermonuclear engine that used heavy elements such as zinc and lead as propellant, granting it higher thrust than thermonuclear engines that used lighter elements as propellant. The mobile suit's design was largely unchanged from the YMS-09 Prototype Dom aside from its appearance. It inherited the same cross-shaped monoeye rail from the MS-07C-5 Gouf Test Prototype, granting it an improved view of aerial targets. Lateral field of view was obtained by auxiliary sensors.For defense, the Dom was heavily protected, adopting a unique "skirt armor" design to protect weak points in the back, such as thrusters. Its cockpit hatch armor, which was its greatest weakness in the front, was also greatly enhanced. However, since the cockpit was entered directly from the front of the Dom, pilots in desert and wetland areas complained that the console panel would become dirty from entering and exiting. Meanwhile, the Dom's head was merged into its chest, a design intended to deflect and ricochet enemy projectiles, as well as lowering the possibility of being hit.The Dom's primary weapon, the 360mm Giant Bazooka, was developed in parallel with the mobile suit. It was capable of sinking a space cruiser with a single shot. It was also armed with a heat saber for close combat, as well as a scattering beam cannon in its chest, which was capable of blinding the enemy. It was said that the beam cannon was originally intended to be an energy port for beam weapons, but was repurposed after the development of beam weapons was delayed.

The RMS-106 Hizack (aka Hi-Zack) is a mass-production general-purpose mobile suit introduced in Mobile Suit Zeta Gundam. It was based on the MS-06 Zaku II series and was used by EFF groups, including the Titans, during the Gryps War. A mass-produced mobile suit developed at Granada with help from Anaheim Electronics, which absorbed the Zeonic Company which was once the major mobile suit developer for the Principality of Zeon. While the Hizack's external appearance resembles that of Zeon's famous Zaku II, it was a vast improvement over the older mobile suit. The Hizack's design incorporated both Earth Federation and Zeon technologies, with the latter contributing to it having the same high operating reliability and ease of production as the Zaku II. Data from the MS-06F2 Zaku II F2 Type was also referenced during development.The Hizack is outfitted with a titanium alloy ceramic composite armor and has a higher output generator than that of a Zaku. It is also faster and more agile than its predecessors and is easy to pilot. The Hizack is most often equipped with a 120mm machine gun kai, beam saber, or heat hawk. It sometimes uses a beam rifle, but due to its low generator output, it can only carry one beam weapon at a time. The Hizack can also be equipped with missile pods. Although the Titans were assigned to wipe out the remnants of Zeon forces, their Hizack uses a similar dark green color scheme. Meanwhile, the regular Earth Federation Forces used a dark blue color for their units.

CEK-040 Beguir-Beu (ベギルベウ Begirubeu?) is a mobile suit introduced in Mobile Suit Gundam the Witch from Mercury PROLOGUE. It is piloted by Kenanji Avery. This is an MS developed by Grassley Defense Systems, one of the world's leading heavy industry manufacturers. It is a high-performance machine that incorporates the latest technology in various sections while following the basic structure of Mobile Suits where EMTs (electric motors) are used to move the joints that connect the Link (skeletal structure).

Guel's Dilanza (ディランザ グエル専用機 Diranza Gueru Sen'yō-ki?) is a mobile suit introduced in Mobile Suit Gundam the Witch from Mercury. It is piloted by Guel Jeturk. Among the basic MS Dilanza units developed by Jeturk Heavy Machinery, a number have been customized for their pilots. One of these has been modified to suit the piloting style of Guel Jeturk, heir to the company. Its outward appearance has also been tailored to fit Guel's penchant for the ostentatious. Painted in a vivid magenta and fitted with a decorative headpiece, this unit embodies the skill and unshakable self-confidence which made Guel, Asticassia's best pilot. It gives the impression that no other unit could be worthy of such a pilot.

The XGF-02 Gundam Lfrith (XGF-02 ガンダム・ルブリス Gandamu Ruburisu?), aka LF-03, is a mobile suit introduced in Mobile Suit Gundam the Witch from Mercury PROLOGUE. It was piloted by Elnora Samaya during the Vanadis Incident. This was a prototype MS developed by the Ochs Earth Corporation, a company that was established on Earth. The most prominent feature of this unit was the implementation of the GUND Format, where "GUND"—an innovative body function expansion technology based on artificial limb welfare engineering—was refined for mobile suits. The mobile suits that incorporated the GUND Format and gained cross-disciplinary fighting abilities were collectively called GUND-ARMs, and people across the world soon came to call them "GUNDAMs".