High Grade 1/144 Gundam

The RMS-192M Zaku Mariner (aka Zaku-Mariner) is a mass-production amphibious mobile suit first featured in the anime series Mobile Suit Gundam ZZ; the design was later updated and featured in the novel/OVA series Mobile Suit Gundam Unicorn. The units that appeared in Mobile Suit Gundam ZZ were piloted by Flynn, Eyne, Beats, Green and Fritz.

The GNT-0000SDV Gundam 00 Command Qan[T] (ガンダムダブルオーコマンドクアンタ Gandamu Daburuō Komando Kuanta?) is a Gunpla that appears in the Gundam Breaker Battlogue ONA. It first debuted in the tie-in mobile game Gundam Breaker Mobile. A custom Gunpla with SD Command Gundam elements added to the 00 Qan[T]​. In addition to improving the defense power with additional armor, it is possible to fight in any situation with a number of new weapons for both close and far. The 00 Command Qan[T] is also equipped with a sub-energy tank for prolonged battles and its combat style is reminiscent of an elite soldier who detaches used-up weaponry to increase mobility and strives to complete a mission even if it only has its Combat Knives left.

The MS-06R-1A Zaku II High Mobility Type is a mobile suit first introduced in Mobile Suit Variation. After the successful release of the MS-06R-1 Zaku II High Mobility Test Type the Zeon engineers began to receive feedback from the pilots on ways the mobile suit's design could be improved. The biggest difference from the R-1 is that the fuel tanks on the back and legs have been modified into cartridges to solve the problem of propellant consumption. In particular, those of the legs are changed into cylindrical cartridges. This not only simplifies replenishment in the mother ship, but also allows for replenishment in outer space, and a platoon equipped with this unit is to be accompanied by a Zaku equipped with refill cartridges. As a result of these changes, the MS-06R-1A Zaku II High Mobility Type has a longer operation time. Furthermore, an escape system has been adopted in the cockpit for this machine, and it is possible to eject the seat and base forward in an emergency. The base has a certain degree of propulsion function, and is also equipped with solar cells and life support devices.

The MS-06F-2 Zaku II F2 Type (aka MS-06F2 Zaku II F2 Type) is a mobile suit introduced in Mobile Suit Gundam 0083: Stardust Memory. The F2 Type was the late production variant of the MS-06F Zaku II. Based on the operation data of its predecessor, the F2's design concept was to revise the Zaku II for anti-mobile suit combat - something that was not accounted for in mobile suit design until the MS-07B Gouf - by reducing its weight and increasing its thruster output. In addition, since the F Type's armor around the cockpit hatch was fragile, the F2 Type featured a redesigned chest armor, which became its most distinctive feature compared to other models of the same series. Since a portion of the F2 Type was produced after the implementation of the United Maintenance Plan, these units share the same unified cockpit design as well as some parts as other second phase production type mobile suits. These units were easier to pilot than existing mobile suits, and were popular among new recruits and cadets.

The ZGMF/A-262PD-P Mighty Strike Freedom Gundam is a mobile suit introduced in the animated film Mobile Suit Gundam SEED Freedom. It is piloted by Kira Yamato and co-piloted by Lacus Clyne. The ZGMF/A-262PD-P Mighty Strike Freedom Gundam is the combination of the ZGMF/A-262B Strike Freedom Gundam Type II and the MDE262S Proud Defender support craft, replacing the Super DRAGOON wing backpack and giving it enhanced combat ability. It uses advanced nanoparticle technology controlled by its wings to create various offensive and defensive abilities, including the creation of a spherical energy shield capable of absorbing heavy attacks from all directions, and a wide-scale electric attack that can shut down enemy targets and destroy projectiles within a large area around it.

The AGX-04 Gerbera Tetra (ガーベラ・テトラ) is a prototype assault mobile suit, designed by Mika Akitaka, and featured in the OVA Mobile Suit Gundam 0083: Stardust Memory. It was piloted by Cima Garahau. As part of its military reconstruction following the One Year War, the Earth Federation Forces began its Gundam Development Project in collaboration with Anaheim Electronics, the goal was to produce new experimental Gundam-type mobile suits. The intended fourth unit in this GP series was the RX-78GP04G Gundam "Gerbera". Its design sought to replicate the high-speed mobile suit assault tactic successfully established by the Principality of Zeon late in the war, in which a single mobile suit was able to penetrate the enemy forces and deal heavy damage as exemplified by the MS-18E Kämpfer. However, the role of the "Gerbera" was found to have many overlapping elements with its brother unit, the RX-78GP01 Gundam "Zephyranthes" which was upgrade-able for space combat, so its development was cancelled. As a result, Anaheim Electronics was left with a half-completed "Gerbera". The division within Anaheim Electronics that produced the "Gerbera" was created from the Zeonic Company (which still had strong loyalty to Zeon) and was approached by the Delaz Fleet. The division then revised the design of the "Gerbera" to hide its origin, and produced the AGX-04 Gerbera Tetra. The Gerbera Tetra features a simple armament, consisting of four 110mm machine guns, two mounted in each forearm, two beam sabers for melee combat, and a beam machine gun, a beam weapon with a much higher rate of firepower than standard beam rifles. The Gerbera Tetra can be equipped with an optional stürm booster on its back, which despite increasing the overall mass, dramatically increases the suit's speed and flight range.  

The xvt-mmc Geara Ghirarga (煌（ギラ）・ギラーガ?) is a Gunpla that appears in the Gundam Build Divers and Gundam Build Divers Re:RISE. Based on the xvt-zgc Ghirarga, it is built and piloted by Do-ji.

The MSM-10 Zock was one of Principality of Zeon's amphibious mobile suits developed during the One Year War. It was introduced in the anime Mobile Suit Gundam.

The High Grade Gundam Breaker Battlogue (HGGBB) MSB-GH03 Gundam Helios is a 1/144 scale kit released in 2021.

The High Grade Gundam SEED (HG SEED) ZGMF-1000/A1 Gunner ZAKU Warrior (Lunamaria Hawke Custom) is a 1/144 scale kit released in 2005.

The High Grade Universal Century (HGUC) RGM-79D GM Cold Districts Type is a 1/144 scale kit released in 2003.

The V07-0126 Sigrún (ジークルーネ?) is a mobile suit introduced in the Mobile Suit Gundam IRON-BLOODED ORPHANS MSV[1] and appearing in Mobile Suit Gundam IRON-BLOODED ORPHANS G. The Sigrùn is one of the mobile suits that adopted the Valkyrja Frame developed near the end of the Calamity War over 300 years ago. It was designed under the concept of a high mobility/high output unit that could change the tides of the war, resulting in a high-performance machine. The small but high output thruster units are prominent features of the Sigrún. Close-quarters combat using the Valkyrja Rapier, Sigrún's main melee weapon, is supported by the thruster units mounted on the back and waist. The Sigrún also uses the Valkyrja Round Shield alongside the Valkyrja Rapier, and both weapons as well as the curved design of the mobile suit's armor are reminiscent of knights from the Middle Ages. The Valkyrja Frame was developed to become a symbol of those who wished to win the Calamity War. However, only a few battle records exist of the Sigrún and other Valkyrja Frame units. This was because mobile suits developed around the same time which used the Gundam Frame swept the battlefield, and the war ended before the Valkyrja Frame units were able to play an active role, causing them to fade into obscurity. So few units were manufactured and only a limited number of people know about them. Despite this, Sigrún and the other Valkyrja Frame units were re-evaluated after the war. Gjallarhorn carried out research based on the design concept of the Valkyrja Frame during the development of its mainstay mobile suits.

The GNX-603T GN-X (aka GN-X (often pronounced as Jinx)) is a mass production mobile suit used by the United Nations Forces in season 1 of Mobile Suit Gundam 00.

The GNR-101A GN Archer (aka GN Archer, pronounced "Gun Archer") is a transformable support unit for the GN-007 Arios Gundam introduced in Season 2 of Mobile Suit Gundam 00, and is piloted by Soma Peries (Marie Parfacy).

The AMX-011 Zaku III (aka AMX-110 Zaku III) was a mass-produced general purpose mobile suit introduced in the anime Mobile Suit Gundam ZZ. One unit was piloted by Rakan Dahkaran. A descendant of the Zaku series of mobile suits, the Zaku III was designed to be highly versatile, being able to perform just about any mission role and many option parts were developed for it. The Zaku III is a big step up from the venerable MS-06 Zaku II, possessing better armor, over twice the power output, three times the sensor range, and four times the thruster acceleration, not to mention the various new beam weapons it wielded. Its backpack is equipped with integrated propellant tanks and flexible vernier thrusters, improving its cruising range and mobility. In U.C. 0096, the Neo Zeon remnant group, the Sleeves, used modified Zaku III units. The Zaku III's front skirt armor were reconfigured with two sub-arms, allowing it to quickly deploy and wield both beam sabers at the same time, catching enemies off guard in close-quarters combat. The Sleeves' Zaku III's left shoulder armor is also replaced with one from the Zaku III Custom.

The GN-000 0 Gundam (pronounced Oh-Gundam) is the first GN Drive equipped mobile suit in the Mobile Suit Gundam 00 series. It was piloted by Ribbons Almark and later by Lasse Aeon. The 0 Gundam was a general-purpose mobile suit developed during the Solar Power Wars, 15 – 20 years prior to the revelation of Celestial Being, and was completed around A.D. 2290. The first Gundam created by Celestial Being, it was also known as the first generation machine. Data obtained from it was used in creating the second generation Gundams such as the GNY-001 Gundam Astraea. Unbeknownst to the organization, the 0 Gundam's data was copied by Ribbons Almark and the Corner Family, who later used it to create the Throne series. Although Ribbons was once the 0 Gundam's pilot, he was not its official Gundam Meister as the suit did not switch its rollout color scheme (white, grey and yellow) to a custom one, a standard procedure whenever a Gundam has an official Meister. While the completion of the GN Drive was an important step in the establishment of GN Drive-equipped mobile weapons, it also required the development of ancillary technologies and materials like E-Carbon that is capable of withstanding the machines' high output. No matter how revolutionary a specific part is, it would not be able to demonstrate its full capabilities until surrounding technologies have also developed enough. As such the completion of the 0 Gundam was a triumph as it established the basic concepts and systems for later Gundams. This included the use of the GN Drive as the main engine unit, use of the GN Drive's high output to drive beam weapons, presence of clavicle antennae on the torso for controlling GN Particles, and head-mounted v-fin antenna as well as twin eye camera. Compared to later Gundams, the GN Drive's cone on the 0 Gundam's back was not only of a different design, it was also larger and protruded out more as the drive's ancillary/support systems were yet to be miniaturized. In terms of armaments, the suit has a Beam Saber, Beam Gun, and Gundam Shield for close to mid-range combat. During the Celestial Being's armed intervention in A.D. 2307-2308, the 0 Gundam was with the shadow support organization, Fereshte, who usually took out its GN Drive to power their Gundams. Fereshte eventually merged with the reborn Celestial Being, bringing the 0 Gundam along. The 0 Gundam's GN Drive was then removed and used in powering the GN-0000 00 Gundam, while the suit itself was stored in one of Celestial Being's resource satellites. The 0 Gundam was later pulled out of storage for combat deployment during the final battle with the Innovators. Since there was no GN Drive left to power it, the 0 Gundam was fitted with a large GN Condenser, also known as particle storage tank, that gave it limited operational time. It also had a new color scheme of red, blue and yellow, and was renamed as 'GN-000 0 Gundam (Type A.C.D.)' (Actual Combat Deployment) to differentiate it from its original form. This version uses the same armament as the original's. Later in the battle, the 0 Gundam (Type A.C.D) was abandoned by the backup Gundam Meister Lasse Aeon after its particle reserves were depleted. It was then found by Ribbons, who reactivated the Gundam one last time using a GN Drive he had cut off from the 00 Gundam.

The AMX-107 Bawoo is a transformable mobile suit developed by Neo Zeon during the First Neo Zeon War. It was introduced in the anime Mobile Suit Gundam ZZ. Created by Neo Zeon based on the 'Project Zeta' series of MS, the AMX-107 Bawoo is capable of transforming and separating into the Bawoo Attacker (upper torso) and autonomous Bawoo Nutter (lower torso) units. On Glemy Toto's orange-colored prototype, the left thigh armor is decorated with the archaic kanji 𪚢, which combines the characters for dragon (龍) and flight (飛) and is pronounced "bau" (bawoo) in Japanese. Glemy highly praised the Bawoo Attacker's fluid, effortless mobility, and its potential as an escape unit. The standard armaments of the Bawoo consisted of grenade launchers, beam sabers, beam rifle, and shield with five mega particle cannons. When required, it can also carry three missiles on each flexible wing binders. In U.C. 0096, the Neo Zeon remnants, the Sleeves, deployed modified Bawoo units. Besides a new color scheme and the group's distinctive markings on its arms and chest, the suit also gained a pair of vulcan guns on its torso, a pair of machine cannons in its side skirt armor and uses a beam machine gun as well as a shield without the mega particle cannons. The Bawoo Nutter was reconfigured to have its own cockpit, granting better coordination with the Bawoo Attacker, and allowed the Nutter to continue operating if the Attacker was destroyed. The Nutter could also carry six missiles, bringing the total amount of missiles to twelve.

The STTS-909 Rising Freedom Gundam is a mobile suit introduced in the animated film Mobile Suit Gundam SEED Freedom. Using all previous operational data from the ZGMF-X20A Strike Freedom Gundam, the unit was designed incorporating transformation technology acquired by Orb through the MVF-M11C Murasame. Also, its weapons are developed and manufactured from PLANT, and latest technologies from various countries and organizations are used to develop this unit. It shares a frame with the STTS-808 Immortal Justice Gundam, as well as containing the same panoramic monitor cockpit and operating system. This state-of-the-art mobile suit is also remarkable in that it is even more compact in size than previous Freedom variants. Its equipment mainly consists of long-distance combat armament, with Variable Phase Shift (VPS) Armor that can neutralize physical ammunition. With its common frame as a base, equipment may be changed depending on usage needs, making this a multi-role unit capable of utilizing numerous variations. Unlike its predecessors, the Rising Freedom Gundam is battery-powered, necessitating the use of various measures to conserve power for its energy-intensive loadout. A planned upgrade was meant to combat the weaknesses of the Rising Freedom being battery-powered with the MDE262S Proud Defender, which would have greatly increased its combat abilities, but the Proud Defender was not completed in time due to development delays, and after the untimely destruction of the Rising Freedom the planned upgrade was re-adjusted for the secretly renovated ZGMF/A-262B Strike Freedom Gundam Type II.

The GN-009 Seraphim Gundam (aka Seraphim Gundam, Seraphim) is the successor to GN-004 Gundam Nadleeh introduced in Mobile Suit Gundam 00 season two. It was piloted by Tieria Erde.

The MSJ-06II-A Tieren Ground Type (aka Tieren Ground Type, Tieren) is a mobile suit introduced in season one of Mobile Suit Gundam 00.