High Grade 1/144 Gundam

The GAT-X105 Strike Gundam is a prototype multi-mode mobile suit introduced in the anime Mobile Suit Gundam SEED. Its primary pilot was Kira Yamato before it was passed down to former mobile armor ace pilot, Mu La Flaga.The Strike Gundam is the most versatile of the five Gundams in the Earth Alliance's G Project and can be easily configured for various types of combat. Using its Striker Packs, it can be outfitted for high mobility combat (Aile Strike), long-range assault (Launcher Strike), or melee combat (Sword Strike). In addition, the Striker packs are also equipped with backup batteries that can extend the Strike's operation time. Built on the X100 series frame first adopted by the GAT-X102 Duel Gundam, the Strike also has the Phase Shift armor system. In terms of armament, the Strike itself is equipped only with two head-mounted CIWS and a pair of combat knives stored in the side skirt armor, but it can also be armed with a bazooka, a shield, and a beam rifle. Later on, the Strike Gundam was equipped with a Natural-use OS to allow its new pilot, Mu La Flaga, to control the suit effectively.

MS-05S Char's Zaku I (MS-05S ザクⅠ（シャア専用機）?) is a mobile suit featured in the Mobile Suit Gundam: The Origin manga, its OVA adaptation and Mobile Suit Discovery . It was Char Aznable's own customized MS-05 Zaku I Anticipating a war of independence, the Principality of Zeon forces made their preparations for the outbreak of war by mass-producing the MS-05 Zaku I. The MS-05 Zaku I was armed with ranged weapons and a shield affixed to its forearm, and in close combat, it was designed to carry out ramming attacks using the armor attached to its left shoulder. However, a few ideas for revisions were suggested based on mobility test data. A new type of shield mounted on the right shoulder was developed, which could protect the machine over a wider area. And for offense, a new type of left shoulder armor was introduced, with spikes installed for increased damage during ramming attacks. In addition to the standard MS machine gun (drum magazine type) and Type A1 MS bazooka, the MS machine gun (belt-fed type) was developed, which had increased ammunition thanks to a feed mechanism mounted on the mobile suit's back. This new equipment, which eliminated the problems of the MS-05 Zaku I, was intended for use by the improved MS-06 Zaku II that was being developed at a rapid pitch. However, since the war of Zeon independence broke out just before the MS-06 Zaku II entered full-scale mass production, some units of the MS-05 Zaku I were fitted with this MS-06 Zaku II eq

The MS-04 Bugu (MS-04 ブグ?) is a mobile suit featured in the Mobile Suit Gundam: The Origin and Mobile Suit Gundam: The Origin MSD Cucuruz Doan's Island manga, the Mobile Suit Gundam: The Origin OVA, its television recut, and the Mobile Suit Discovery design series. Developed by Zeonic from the YMS-03 Waff , tests were conducted at the Dark Colony in U.C. 0077 . In U.C. 0078, Ramba Ral's Bugu fought in the Battle of Mare Smythii . The development of the mobile suit took a huge step forward thanks to the compact fusion reactor and fluid pulse system designed by Dr. Torenov Y. Minovsky, resulting in the birth of the prototype YMS-03 Waff. The MS-04 Bugu was completed using data gathered with the Waff, and it was designed with a focus on its mobility, maneuverability, and ease of production as a weapon, making this the first machine capable of handling genuine combat. To improve its mobility, the power pipes that transmitted energy as part of the fluid pulse system were attached to the outside of its armor, and the increased supply of the energy used to drive its limb joints gave it very high maneuverability. However, as is often the case in the development of high-performance prototypes, it was designed with no regard for ease of production. With its high production cost, it was unsuited for mass production, and the role of official mass-produced machine was given to the redesigned MS-05 Zaku I. Though the Bugu never entered mass production, several units were built .

The RGM-79HC GM Guard Custom is a mobile suit from Mobile Suit Gundam THE ORIGIN Mobile Suit Discovery. The GM Guard Custom is a mobile suit with improved defense capabilities based on the RGM-79SC GM Sniper Custom. Its personal armament, the Guardian Shield, is composed of five layers of composite armor made of four different alloy materials. It is armed with a beam spray gun and beam daggers that produces a short blade, while a visor with a compound sensor is placed on the head. Despite having high performance, the suit is hard to control and passed to highly skilled pilots. The GM Guard Custom is primarily used for guarding the fleet and base defense, playing an active role in the latter stage of the One Year War.

The MSN-02 Zeong (ジオング Jiongu) is a prototype mobile suit appearing in the anime Mobile Suit Gundam. It was first piloted by the "Red Comet" Char Aznable. Developed by the Principality of Zeon at the A Baoa Qu space fortress during the One Year War, the Zeong was built exclusively for Newtype pilots. It initially had the model number "MS-16X" and was developed based on the data of multiple experimental units. The Zeong was also the first mobile suit to use the Psycommu system, which allowed a Newtype pilot to utilize its wire-guided remote-controlled forearms for all-range attack effectively. Each forearm was built with five mega particle cannons in its fingers. The Zeong also has three more mega particle cannons on its body, two in the waist and one in the head.The Zeong was expected to be around 35m tall when fully completed, making it much larger than most mobile suits of the time. Its large size was attributed to the difficulties in miniaturizing the Psycommu system. Though another account suggested that it was due to the need for larger generators to power its thirteen mega particle cannons. In the end, this mobile suit was only 80% complete when it was deployed, thus its lack of legs and exposed upper arms. Although the legs would aid in the AMBAC System, their omission did not hinder the Zeong from performing at 100% combat capacity, since two rocket thrusters were installed at where the legs were supposed to be.Although the Zeong was developed for Newtypes, it could also be operated by normal pilots. In this situation, the mobile suit would be controlled by a pilot in the torso cockpit and a gunner in the head cockpit. The two cockpits were connected by a traversal tube. In contrast, a single Newtype pilot could fully operate the Zeong from either one of the cockpits, though due to the mobile suit's prototype nature, its activation and initialization could only be done in the torso cockpit. In order to ensure the recovery of its data and pilot, especially if the pilot was a Newtype, the head also doubled as an escape pod and could detach from the main body when necessary.

The ORX-005 Gaplant TR-5 [Hrairoo] is a prototype transformable mobile armor, it is a variant of the ORX-005 Gaplant TR-5. The unit is featured in the photo-novel Advance of Zeta: The Flag of Titans. One problem with the standard ORX-005 Gaplant is the intense G-force produced by the movable shield binders, making it best used with a Newtype pilot. Due to this, when it was first produced, the ORX-005 Gaplant TR-5, it was instead mounted with booster shields used by TR-1 Hazel. Aside from this, a few changes were applied during the TR-5's initial service, such as applying an enhanced sensor unit and V-fin onto the head sensor, and replacing the main engines in the backpack with a thermonuclear hybrid jet-rocket engine, as with other machines of the TR series. For its main armament, the TR-5 carries a long blade rifle, which is mounted on the underside of the machine in mobile armor form.Later on, near the end of Gryps conflict, the TR-5 Hrairoo is further refined as an Area Dominance Mobile Armor, similar in purpose to RX-78GP03 Gundam "Dendrobium", but for all three major environment (atmosphere, ground, space). The booster shields were changed back to the moveable shield binders. The side armor and back armor have additional thrusters and armor mounted onto it, greatly increasing its maneuverability and defense; the back waist armor also comes with a moveable hardpoint, allowing it to mount an additional manipulator arm. The front waist armor is also enhanced, and thus now has spray beam emitters for defense, as well as two hidden arms underneath. The long blade rifle is upgraded to be able to equip 2 booster-type shields, which further increase its mobility (standard booster shields), attack power (micro missiles shields), or defense (spray beam shield).Furthermore, it can be equipped with the Hrududu II support unit. The shoulders mount booster-equipped claw units with beam emitters that can connect to the long blade rifle to form a very powerful beam cannon. With the Hrududu II, Gaplant gains four more hard points, allowing it to mount additional manipulator arms, shield units, and eventhe arms of the Psyco Gundam.

The RGC-83 GM Cannon II is a mobile suit introduced in the OVA Mobile Suit Gundam 0083: Stardust Memory. The successor of the RGC-80 GM Cannon, a medium-range support mobile suit developed in the late stage of the One Year War, the RGC-83 GM Cannon II was based on the RX-77D Guncannon Mass Production Type and inherited the Chobam Armor concept of the RX-78NT-1 Gundam NT-1. It was the culmination of the Federation's artillery support mobile suit development.Thanks to improvement in technology and productivity, the GM Cannon II was installed with a powerful generator, allowing it to be equipped with two shoulder-mounted beam cannons. This made it the first mass production unit to have high-powered beam cannons. These beam cannons were usually powered by the generator itself, but could also be powered by the two Energy CAP mounted on its backpack. A sighting device located on the pilot seat's headrest can be used to aim the beam cannons. For precision shooting under gravity, the stabilized gear on the waist could be deployed to stabilize the machine.The GM Cannon II's other weapons included a pair of head-mounted 60mm vulcan guns, a shortened beam saber stored in the left forearm, and the same GM Rifle and shield used by the RGM-79N GM Custom. Due to its role as a fire support mobile suit, the beam saber was only meant for close-quarters self-defense and it rarely had the chance to use it. The GM Cannon II also has relatively poor mobility due to the mass of its weapons and armor.The design of the GM Cannon II's basic components prioritized parts interchangeability with GM type mobile suits. Parts of its exterior was covered in composite armor, similar to the Chobam Armor used by the RX-78NT-1 "Alex". This composite armor improved bullet resistance while keeping the mobile suit's weight down. Unlike the Alex's Chobam Armor, the composite armor was built directly onto the frame and could not be purged when damaged. Despite their structural differences to Alex's armor, the composite armor was often referred to as "Chobam Armor" for convenience.Like the GM Custom, there was a plan to mass produce the GM Cannon II, but due to issues such as cost and the fact that the machine was meant to operate alongside the GM Custom, only a few units were actually deployed. After the Delaz Conflict, the project itself, including its development staff, was placed under the control of the Titans. The GM Cannon II's production was halted and a direct successor to it was never developed.

The FA-78-3 Full Armor 7th Gundam is a mobile suit introduced in M-MSV. It was later redesigned and appears in the video game Mobile Suit Gundam: Battlefield Record U.C. 0081. The FA-78-3 Full Armor 7th Gundam is the additional armor-equipped version of the RX-78-7 7th Gundam. Unlike the previous FA-78-1 Full Armor Gundam, the Full Armor 7th Gundam is able to fight without any drop in performance. This is accomplished with the addition of built-in sub-generators and propellant tanks in the Full Armor components. The emphasis of the Full Armor components is offensive power rather than defensive power. In addition, the tail stabilizer on the rear waist, which is the mass center of the MS, act as an AMBAC device and dramatically improved the unit's acceleration capability.

The RX-178 Gundam Mk-II is a mobile suit introduced in the anime series Mobile Suit Zeta Gundam. It is a successor of the famous RX-78-2 Gundam that served in the One Year War. A direct descendant of the RX-78-2 Gundam developed by the Titans, the Gundam Mk-II is the first mobile suit to utilize the new movable frame concept. In this new concept, rather than merely serving as a structural framework, the movable frame incorporates all the mobile suit's vital mechanisms, including the actuators and control systems required for movement, and excludes the mobile suit's weapons, armor, and propellant tanks. This approach dramatically improves the mobile suit's responsiveness, reliability, and energy efficiency, as well as making it far more agile than traditional designs.Another characteristic of the Gundam Mk-II is that some of its legs' movable parts are exposed and this design feature is based on the prevailing idea at that time that avoiding being hit by the enemy is the preferable choice. The origin for this idea is because no existing armor can fully protect against beam weaponry, thus it is better to increase the mobile suit's mobility by weight reduction rather than equip more armor which would lead to a higher weight and lower mobility.The mobile suit also has what had become the standard 360-degree panoramic screen and linear seat fitted in a circular cockpit that also functions as an escape pod. The multiple panels of the panoramic screen make up a single 360-degree display, covering the entire inner surface of the cockpit. The image displayed on this screen is a computer simulation constructed from the cameras distributed around the mobile suit's exterior. The viewpoint is that of the mobile suit's head, and the image is carefully edited to remove the mobile suit itself. The linear seat is suspended in the center of the cockpit, supported by a linear arm which electromagnetically counters G-forces and impact shocks in order to protect the pilot. Together, the panoramic screen and the linear seat gives the pilot a larger field of view and eliminates blind spots.The most notable flaw of the Gundam Mk-II is that it is armored using the obsolete titanium alloy ceramic composite. Another flaw is that the movable frame's leg sections have rigidity issues associated with the strength of the structural material used, and this problem persisted even after six design revisions. Despite this, for a brief time period, the Gundam Mk-II's movable frame makes it one of the most agile mobile suits available. Three Gundam Mk-II were produced in total. They were later stolen by the Anti-Earth Union Group (AEUG) and given a new paint scheme. Despite being used by two different factions, the Gundam Mk-II's weaponry remains mostly unchanged. Its only fixed weapons are two beam sabers, but it can carry a vulcan pod, a shield, a beam rifle, a hyper bazooka and a clay bazooka if necessary.

The MSJ-121 Demi Trainer (デミトレーナー Demitorēnā?) is a mobile suit introduced in Mobile Suit Gundam the Witch from Mercury. Demi Trainers were developed for students of the Asticassia School of Technology, a school created for training personnel in the space development industry. The unit's design is stripped of all superfluous components, affording it superb maneuverability and serviceability. The MS can be modified by anyone with basic technical knowledge, giving it excellent potential for customization. In addition to these facets, Demi Trainers are said to be the best choice for those learning to pilot, making them an obvious choice for students at the school. If asked which MS they felt most comfortable with, students are most likely to answer, "Demi Trainer".

The MSN-06S Sinanju (aka Sinanju) is a mobile suit featured in the Mobile Suit Gundam Unicorn novel, its OVA adaptation and the television re-cut. A modified version of the MSN-06S Sinanju Stein, it was piloted by Full Frontal. Originally the MSN-06S Sinanju Stein developed by Anaheim Electronics as part of the Earth Federation's "UC Project", its movable frame is partly made from Psycho-Frame materials. This mobile suit was then stolen and modified into the MSN-06S Sinanju by the Neo Zeon remnant group known as "The Sleeves", and became the personal machine of the group's leader, Full Frontal.All of the Gundam-like features (except for the head-mounted vulcan guns) in the Sinanju Stein have been replaced with a Zeonic design and weaponry. Painted in crimson and with gold engraving, the Sinanju looks like the emblem of the Neo Zeon forces embodied. This decoration not only strengthens the armor, but is also said to be a design that is meant to control the organization known as the Neo Zeon remnants. The Sinanju Stein was an experimental machine, so there were some concerns about the armor's resistance to elasticity, but in order to increase the pilot's survival, the beam coating was strengthened from the two-layer structure used in most conventional MS to a five-layer structure, and the entire cockpit block was covered with Luna Titanium X material, and the Sinanju's armor has been strengthened as flagship machine.The Sinanju is also equipped with thrust deflector thrusters shaped like the large wings of a bird of prey, and flexible thrusters on the left and right sides of both legs and shins. Together with the numerous thrusters located all over its body, it is capable of acrobatic maneuvering combat that is impossible for a normal MS to achieve. With its overwhelming combat ability, crimson body, and mono-eye sensor, the Sinanju reminds all who see it of the legendary "Red Comet".

The MSN-04 Sazabi is a mobile suit introduced in Mobile Suit Gundam: Char's Counterattack. It is piloted by Char Aznable. After Char Aznable returned as the leader of his own Neo Zeon faction in U.C. 0093, he ordered his engineers to create a new mobile suit which would fit his piloting skills and Newtype powers. The result was the MSN-04 Sazabi, which was later built by the Luna-based contractor Anaheim Electronics . With an overall height of 25.6 meters, the Sazabi is much bigger than most standard mobile suits, but thanks to the use of lightweight armor materials and a great number of thrusters it is much faster and maneuverable than other suits. The suit is armed with an abdomen-mounted scattering mega particle cannon, a beam shot rifle, a pair of beam sabers stored in the arms and a shield with three missiles as well as a beam tomahawk.Because Char is a Newtype, the Sazabi was also equipped with six funnels which the pilot could control through his psycowaves via a Psycommu system. The Sazabi was also the first MS to be equipped with the revolutionary new psycoframe cockpit. This system featured microscopic psycommu receiver circuits installed throughout a mobile suit's internal frame and cockpit walls. These tiny circuits amplify and transmit a Newtype pilot's psycowaves, enabling the mobile suit to respond instantaneously to mental commands.

The MSM-07E Z'Gok-E (aka MSM-07E Z'Gok Experiment) is an experimental amphibious mobile suit introduced in the Mobile Suit Gundam 0080: War in the Pocket OVA . The Z'Gok E was an experimental improved version of the MSM-07 Z'Gok. Besides improved beam cannons in its arm, allowing for rapid-fire, the original Z'Gok's head-mounted missile launchers were also replaced with torpedo launchers for additional firepower when operating underwater. To allow for better cruising range underwater, the suit's main propulsion systems were relocated from the back to the legs to create a more streamlined body shape. Its limbs were also designed to be retractable for the same reason. The thrusters built into its back were meant for jumping and various ground based movements, and greatly boost the suit's mobility on land. The Z'Gok E used a standardized cockpit with the introduction of the United Maintenance Plan, and was powered by an improved generator which gave the suit ample performance.

The PMX-003 The-O is a mobile suit from the series Mobile Suit Zeta Gundam and is piloted by Paptimus Scirocco. The fourth of five mobile suits built by the Newtype Paptimus Scirocco on the Jupitris, the PMX-003 The-O is Scirocco’s personal mobile suit, and perhaps the most powerful. It has an independently developed control system to take advantage of his rare spatial recognition abilities, and its control interface is specifically tuned for Scirocco's use, making The-O impossible to pilot except by Scirocco himself. The generator output specifications are modest at less than 2,000Kw; however, The-O is equipped with a large-scale thermonuclear reactor comparable to that of a warship.The-O has very thick armor that can withstand direct beam hits, such as from the AMX-004 Qubeley's funnels. Although very bulky and heavy, it is outfitted with enough thrusters to maneuver and move at very high speeds, demonstrating powerful thrust similar to mobile armors. It is also extremely agile despite its massive frame, with performance that greatly surpasses common MS and displaying tremendous space combat capabilities. By taking advantage of The-O's large size, it is possible to load large amounts of propellant into various parts of the body and the skirt armor to extend operation time. The leg and armor units incorporate a complex multi-joint structure that allow a high degree of freedom of movement. These parts significantly differ from those found in typical mobile suits.In terms of weapons, The-O is only equipped with four beam swords and a beam rifle. However, thanks to its unique sub-arms, The-O can wield all four swords at once, something that no other mobile suit could do, allowing The-O to excel at close quarters combat. The-O is a robust machine designed with emphasis on mobility instead of excessive firepower, and features an excellent interface that reflects the skill of the pilot.The last special feature of The-O is the Bio-Sensor (no relation to the device installed in the MSZ-006 Zeta Gundam), which functions like a psycommu system and allows Scirocco to more easily interface with his suit.

The RGM-79GS GM Command Space Type is a mobile suit introduced in the OVA Mobile Suit Gundam 0080: War in the Pocket. Following the success of the RGM-79D GM Cold Districts Type, a late production type GM deployed in the One Year War, development of new localized warfare machines using the suit as a basis started. The basic concept is to maintain the fundamental design of the GM Cold Districts Type while improving on its output and mobility. Demands of MS pilots who were unsatisfied with the original RGM-79 GM's performance were also taken into account, and with the upcoming counter offensive in space against the Principality of Zeon in mind, a decision was made to simultaneously developed a ground use unit and a space use unit. The end results were the space use GM Command Space Type, and the ground use RGM-79G GM Command. Both suits were also used to collect data for the development of next-generation mass production models.Specifications wise, the GM Command series is said to be a match for the Zeon's MS-14A Gelgoog, but as many of the machines were deployed to areas outside of the main battlefield that had low urgency, its functions were often suppressed and it could not display its full potential. To improve on the GM Cold Districts Type’s mobility, the GM Command series’ thrusters are distributed all over its body. Furthermore, the backpack, which contains the main propulsion system, was also boldly redesigned and optimized separately for the GM Command Space Type and GM Command. This difference in the backpack is the biggest characteristic that differentiates the two machines, and is related to the different gravitational environment that they operate in, 0G and 1G respectively. While the GM Command had downward-pointing thrusters concentrated on the bottom of the backpack, the GM Command Space Type's thrusters are spread around the backpack and faces various directions. The GM Command Space Type's thruster output is also boosted by 10%, has more apogee motors, as well as a greater propellant capacity for higher operating time.With the GM Command series use of a generator with higher output, intakes and ducts are also added to enhance cooling functions. This higher output generator is however a double-edged sword. Although it allows for full-scale operation of equipment like beam gun and beam rifle, such generators at that time could only be manufactured in zero gravity facilities, so mass production of the suit then at the Earth Federation Forces’ largest production facility at Jaburo was not possible. This had a negative impact on the suit's production number during the war.Due to the accumulation of manufacturing and designing knowledge, the GM Command series' maintainability and operability was greatly improved compared to the very first mass production models that had inconsistent standards. Unlike the normal GM, the GM Command series has additional sensors in the head such as environment monitoring sensors to thoroughly detect human presence/survivability, and this boosts the suit's anti-personnel and anti-material evasive capabilities. The GM Command series is also the first in the GM series to utilize the mono-eye camera in the head to improve producibility. Communication capabilities are enhanced via the shoulder antenna, which also helps to prevent interferences or jamming caused by frequency bands used by civilians inside and outside of colonies. It was relatively easy to change the GM Command series' armor, backpack, and other parts; furthermore, its specifications can also be changed with little modification to the base structures.As the GM Command series was deployed as replenishment units during the war, only a small number were produced. Assignment of the machine to experienced MS pilots was prioritized, and as these pilots were often appointed as commanders of newly formed MS platoon, the GM Command series also gained a reputation as a 'Commander Use Unit' even though it was not specifically built for commanders. There were also cases where the suit was supplied on a platoon scale, leading to a considerable number of operational units in total.

The RGM-79G GM Command is a mobile suit that first appeared in the OVA Mobile Suit Gundam 0080: War in the Pocket. Following the success of the RGM-79D GM Cold Districts Type, a late production type GM deployed in the One Year War, development of new localized warfare machines using the suit as a basis started. The basic concept is to maintain the fundamental design of the GM Cold Districts Type while improving on its output and mobility. Demands of MS pilots who were unsatisfied with the original RGM-79 GM's performance were also taken into account, and with the upcoming counter offensive in space against the Principality of Zeon in mind, a decision was made to simultaneously developed a ground use unit and a space use unit. The end results were the ground use GM Command, and the space use RGM-79GS GM Command Space Type. Both suits were also used to collect data for the development of next generation mass production models.The GM Command is also called the "Colony Type" as it specialized in defending bases in space colonies and surrounding areas. For this reason, its output and weaponry were adjusted to reduce fatal damage to the colony's structure and walls. Specifications wise, the GM Command series is said to be a match for the Zeon's MS-14A Gelgoog, but as many of the machines were deployed to areas outside of the main battlefield that had low urgency, its functions were often suppressed and it could not display its full potential. To improve on the GM Cold Districts Type’s mobility, the GM Command series’ thrusters are distributed all over its body. Furthermore, the backpack, which contains the main propulsion system, was also boldly redesigned and optimized separately for the GM Command and GM Command Space Type. The placements of the thruster verniers on the GM Command's backpack are optimized based on simulations of operation within colonies, and they are pointed downwards for movements under gravity. Various sensors are also added to the backpack, replacing the normal GM's backpack beam saber rack.With the GM Command series use of a generator with higher output, intakes and ducts are also added to enhance cooling functions. This higher output generator is however a double-edged sword. Although it allows for full-scale operation of equipment like beam gun and beam rifle, such generators at that time could only be manufactured in zero gravity facilities, so mass production of the suit then at the Earth Federation Forces’ largest production facility at Jaburo was not possible. This had a negative impact on the suit's production number during the war.Due to the accumulation of manufacturing and designing knowledge, the GM Command series' maintainability and operability was greatly improved compared to the very first mass production models that had inconsistent standards. Unlike the normal GM, the GM Command series has additional sensors in the head such as environment monitoring sensors to thoroughly detect human presence/survivability, and this boosts the suit's anti-personnel and anti-material evasive capabilities. The GM Command series is also the first in the GM series to utilize mono-eye camera in the head to improve producibility. Communication capabilities are enhanced via the shoulder antenna, which also helps to prevent interferences or jamming caused by frequency bands used by civilians inside and outside of colonies. It was relatively easy to change the GM Command series' armor, backpack, and other parts; furthermore, its specifications can also be changed with little modification to the base structures. The suit served as the base for the RGM-79SP GM Sniper II.As the GM Command series was deployed as replenishment units during the war, only a small number were produced. Assignment of the machine to experienced MS pilots was prioritized, and as these pilots were often appointed as commanders of newly formed MS platoon, the GM Command series also gained a reputation as a 'Commander Use Unit' even though it was not specifically built for commanders. There were also cases where the suit was supplied on a platoon scale, leading to a considerable number of operational units in total.

The GN-005 Gundam Virtue (aka Gundam Virtue, Gundam Virtue Particle, Virtue) is a mobile suit featured in season one of Mobile Suit Gundam 00. It is piloted by Tieria Erde. A heavily armed and armored mobile suit, the Gundam Virtue has the highest offensive and defensive power among the third generation Gundams deployed in AD 2307 by the Celestial Being, a paramilitary organization aiming to eliminate world conflicts through armed interventions. Specializing in artillery warfare for fleet battles and assaulting enemy strongholds, the Virtue's firepower is unmatched among contemporaries thanks to heavy beam weaponry, consisting of a GN Bazooka and two GN Cannons. As Virtue is not meant for anti-mobile suit combat, its only melee weapon is a pair of GN Beam Sabers. Due to its large size, Virtue's mobility and evasive capabilities are lower than the other Gundams, but these weakness are mitigated by its high defensive strength in the form of heavy armor and the ability to generate a 360-degree GN Field barrier around itself that can nullify most physical and beam attacks.The Virtue demonstrated impressive propulsion capabilities when it was shown to be capable of overcoming the combined thrust of six MSJ-06II-E Tieren Space Types. Like the other Gundams, Virtue has a semi-perpetual GN Drive in the center of its body that provides almost limitless energy and generates special, multifunctional GN Particles. The GN Particles have a unique mass reduction effect and because of this, the heavily equipped Virtue can operate efficiently and weighs only half as much as the similarly bulky MSJ-06II-A Tieren Ground Type operated by the Human Reform League. This reduction effect remains even when the Virtue is not operating as the GN Drive continues to function. The GN Particles are also utilized for propulsion, beam weaponry, generation of GN Field, attitude control, and for stealth purposes as they can cause electromagnetic interference, leaving conventional communications and radar devices useless.Due to the heavy GN Particle demand of Virtue's beam weaponry and GN Field, large capacity GN Condensers are mounted throughout its body to store excess particles produced by the GN Drive when the Gundam is not operating. The GN Particles are primarily controlled through a pair of torso-mounted clavicle antennas, and light purple-colored "GN Cables" are installed in various locations to facilitate the supply of these particles to each part of the Gundam and for attitude control purposes. In an emergency, the Virtue can activate the special "Trans-Am System" to enhance its thrust and defensive strength, as well as increase its output to three times that of its normal specifications for a limited time period. The Virtue glows red as a side-effect and though Trans-Am boosts the power of its beam weaponry, this system is also a double-edged sword as Virtue's performance will drop dramatically once it ends.Besides the Trans-Am System, which is also utilized by other Gundams, the Virtue has another method of responding to emergency which is more unique, it can purge its armor to reveal the GN-004 Gundam Nadleeh. However, this was not the original intention of the armor purging mechanism, which was meant for the simultaneous switch to Nadleeh while activating the latter's Trial System. The concept of hiding a Gundam within another Gundam can be traced to the common predecessor of Virtue and Nadleeh – the second generation GNY-004 Gundam Plutone, which is fitted with an ejectable flight unit known as the "Core Fighter". The Plutone is also the first Gundam capable of generating a 360-degree GN Field, but its generation system is not as stable as Virtue's. The Nadleeh is concealed to prevent its Trial System, an ability to stop betrayers, from being discovered and for effective utilization of the limited numbers of GN Drives that Celestial Being has.Among the third generation Gundams, Virtue's development was the slowest. At that time, the current form of Virtue was also known as "Gundam Virtue Particle" to differentiate it from an alternate design, the physical projectile-based GN-005/PH Gundam Virtue Physical. Both designs are prepared by Veda, Celestial Being's quantum computing system, based on its predictions about armed intervention missions. Despite their differences, both Virtue Particle and Virtue Physical are designed as artillery units for anti-fleet and anti-stronghold combat, this ensure the Nadleeh is positioned at the rear and could quickly return to the base or mothership to be outfitted with more effective equipment to stop betrayers. In the end, after studying the results of multiple joint exercises involving the four Gundam Meisters, Veda chose Virtue Particle as it displayed better cooperability with the other Gundams.Veda rejected the idea of keeping the Virtue Physical as alternate equipment, because switching equipment mid-mission is expected to be very difficult due to the lean manpower and the design of the mothership. There is also the worry that the enemy might discover the hidden Nadleeh by observing the commonalities between the two equipment sets. The Gundam Virtue is eventually succeeded by the reborn Celestial Being's GN-008 Seravee Gundam, which is also an anti-fleet and anti-stronghold mobile suit equipped with multiple beam cannons and GN Field. Data of the Gundam Virtue is also utilized in the development of the CBY-077 GN Cannon and the GNZ-003 Gadessa, the former is part of Veda's alternate plan for armed intervention and the latter is used by an enemy of the reborn Celestial Being.

The GN-002 Gundam Dynames (aka Gundam Dynames, Dynames) is a mobile suit introduced in season one of Mobile Suit Gundam 00 and is piloted by Lockon Stratos. The paramilitary organization, Celestial Being, deployed several Gundams in AD 2307 to eliminate world conflicts through armed interventions, and the Gundam Dynames that specialized in long-range shooting is one of them. Like its fellow Gundams, Dynames has a semi-perpetual GN Drive in the center of its body that provides almost limitless energy and produces special, multifunctional GN Particles. The GN Particles grant outstanding mobility and are also utilized for beam weaponry, attitude control, and stealth purposes as they can cause electromagnetic interference, leaving conventional communications and radar devices useless. The Dynames is a third generation unit developed using the operational data from the second generation GNY-002 Gundam Sadalsuud, inheriting the reconnaissance mobile suit's powerful sensing capabilities that are now utilized for long-range shooting.During combat, the Dynames primarily serves as a sniper as well as a fire support unit for its allies. Its main weapon is the extremely long-range and powerful GN Sniper Rifle, and when operating this rifle, Dynames is in "Sniper Mode", whereby the Gun Camera hidden in its head is exposed and a precision shooting scope in the cockpit is deployed. The Dynames is however not just limited to long-range attacks as it has a variety of guns and weapons, allowing it to engage in close to mid-range combat when needed, and adapt to various types of missions (including solo mission) as well as changing battlefield conditions. Other standard armaments of the Dynames included GN Beam Sabers on its rear waist unit for close combat, GN Missiles on its knees and front waist armor that can be used to deter approaching enemies, and a GN Shield on the left shoulder for defense. As for optional armaments, it can equipped GN Beam Pistols for close to mid-range combat, a GN Full Shield for enhanced defensive capabilities, and a Super Substratospheric Altitude Gun to snipe targets outside the atmosphere from the ground.Beside mounting the GN Beam Sabers, the Dynames' rear waist unit can be used to support the Gundam when it is shooting from seated positions and has a pair of propulsion systems, known as GN Verniers, that create thrust by releasing GN Particles. These verniers are also utilized by other Gundams and have a mechanism whereby their cores are revealed when being activated and when increasing their output. Additionally, the verniers can be moved at the point of attachment, allowing their thrust direction to be adjusted. The overall layout of the Dynames' cockpit is similar to other third generation Gundams, except for two differences. The first is the aforementioned precision shooting scope stored in the ceiling that lowers down when in use and retracts when not needed. The second is a dock on the right side for placing the individual support AI, Haro, which serves as a sub-pilot, controlling various aspects of the Dynames so the Gundam Meister, Lockon Stratos, can focus on shooting using the precision shooting scope.The third generation Gundams deployed in AD 2307 has several common equipment, including a pair of clavicle antennas on the torso that serve as the primary control device for the GN Particles, light purple-colored "GN Cables" on various body locations to facilitate the supply of GN Particles to each part of the Gundam and for attitude control purposes, and GN Condensers placed throughout the body to store excess GN Particles, ensuring a reserve of particles that the Gundam can rely on when its operation consumed more than what the GN Drive can produce instantaneously. There is also the special "Trans-Am System" that the Gundams can activate during an emergency to enhance their thrust and defensive capabilities, as well as increase their output to three times that of their normal specifications for a limited time period. This system also causes the Gundams to glow red, and in Dynames' case, its shooting accuracy is improved as well. Unfortunately, this system is a double-edged sword, as the Gundams' performance will drop dramatically once it ends. Additional optional equipment was also developed for the Dynames, such as the set of sub-aquatic sniper rifle and accompanying sensors that change it into the GN-002/DG014 Gundam Dynames Torpedo and the GNR-001D GN Arms Type-D support mecha that it can dock with to form the more powerful GN-002+GNR-001D GN Armor Type-D. A successor machine with all-round improved performance is later developed based on the Dynames' data and it is known as the GN-006 Cherudim Gundam. Additionally, the Dynames that was moderately damaged during the battle with the UN Forces was eventually refurbished into the GN-002RE Gundam Dynames Repair, and deployed on Earth following the defeat of the A-Laws and the Innovators.

The MS-18E Kämpfer (ケンプファー Kenpufā?) is a heavy assault mobile suit featured in the Mobile Suit Gundam 0080: War in the Pocket OVA. It was piloted by Mikhail Kaminsky of Zeon's Cyclops Team during the One Year War. The "E" in the MS-18E Kämpfer's model number was an abbreviation for the German word "Einhauen," which translates to "one strike." "One strike" summed up the suit's role as a fast assault unit that was meant to strike quickly, cause massive damage with its varied weapons loadout, and make a fast escape. The Kämpfer was a very focused design, never intended to work outside of its role. Within this role it was an exceptional unit, rivaling the Federation's RX series in firepower and speed. It was equipped with numerous thrusters and verniers to achieve high maneuverability. Conversely, the large number of thrusters resulted in higher fuel consumption rate, limiting its operational time.The Kämpfer's design opted for minimal armor, even removing the hip-mounted skirt armor found on most mobile suits. The choice of conventional shell-based weapons rather than beam weapons was made to reduce the drain on its reactor and resultant drop in speed. Weapon racks were designed to be ejected from the unit as they were expended, minimizing dead weight. The Kämpfer was intended to be operated by special forces, and was built to be easily disassembled and reassembled in blocks, aiding in its infiltration behind enemy lines.

The MS-06CK Zaku Half Cannon is a mobile suit from Mobile Suit Discovery. When news reaches the Zeon's North California military base of a new Earth Federation Forces mobile suit, the development team begins a project to develop a prototype machine to counter the new MS . The MS-06CK Zaku Half Cannon is based on the MS-06 Zaku II and was designed to provide mid-range artillery support . The MS-06CK Zaku Half Cannon is the same MS as the MS-06C Zaku II with the addition of the MS-06K's backpack. The backpack can be equipped with a 180mm cannon or a large gatling gun.