High Grade 1/144 Gundam

The MSM-08 Zogok is a prototype amphibious mobile suit introduced in the original design series MSV and made its animated debut in Mobile Suit Gundam ZZ. It later appeared in the OVA Mobile Suit Gundam Unicorn. The MSM-08 Zogok is a prototype amphibious mobile suit with improved melee capabilities that was developed during the One Year War. A variant of the MSM-07 Z'Gok, the Zogok was one of the special operations "Ag series" mobile suits created by Zeon engineers at California Base for Zeon's invasion of the Earth Federation Forces' underground military headquarters of Jaburo. It was meant to work alongside the other mobile suits of the series, such as the MSM-04G Juaggu, and its role was that of the vanguard. Unlike Z'Gok, Zogok is not equipped with any firearms like mega particle cannons; instead, it has unique melee weaponry such as arm punches using its extendable arms, launchable boomerang cutters from the top of its head, etc. These weapons were also selected to minimize the emission of light and heat, lowering the chances of being detected during the infiltration into the heavily guarded Jaburo. Although an amphibious unit, the Zogok's combat capabilities are primarily meant for ground battles. The Zogok's aquatic ability is limited to travelling underwater using the propulsion units in the sole of its feet. Its backpack has no function underwater and was designed with maximum ground performance in mind. Like many other of Zeon's amphibious mobile suits, the Zogok has no independent head unit to reduce underwater resistance. The functions of such a head unit were integrated into the chest. The large mono-eye camera in the center of the chest has a wide range of motion, and the transparent cover protecting it has fairly high durability.

The MS-05B Zaku I was a mobile suit introduced in Mobile Suit Gundam. The MS-05B was the late production variant of the Zaku I and the first mobile suit assigned to combat units. An improvement over the MS-05A Zaku I Early Type, the B Type was visually identical to the A Type, but featured an improved cockpit design and better armor material. Like its predecessor, the MS-05B's power transmission pipes were all fixed and contained inside its armor. However, as the B Type saw wider deployment than the A Type, the flaws of this design quickly became apparent: since the power pipes took up most of its internal space, it was very difficult to improve its generator output or swap out parts. The structures of its limbs were also very complex due to the internalized power system. These problems would later be addressed by the MS-06 Zaku II series. Its weapons included a custom machine gun, a 280mm bazooka, and a spike shield. It could also be equipped with the standard weapons used by the MS-06 series, including the 120mm machine gun and the heat hawk.

The MS-14JG Gelgoog Jäger is a mobile suit introduced in Mobile Suit Gundam 0080: War in the Pocket. A variation of the MS-14 Gelgoog, the MS-14JG was specialized for precision firing mission, and was also known as "Gelgoog Sniper Type". It was designed with the United Maintenance Plan (UMP) in mind, greatly increasing its specifications and ease of piloting, as well as simplifying its manufacturing process and improving the interchangeability of its parts with other models. The Gelgoog Jäger was equipped with a total of 24 posture control sub-thrusters in addition to the main thrusters, significantly improving its mobility in space. Due to its nature as a sniper unit, its monoeye has a larger field of vision than standard units. In addition, since it was designed as a commander unit, it was equipped with a head-mounted blade antenna by default for enhanced communications. Similarly, its backpack had another antenna and a laser communication unit. The Gelgoog Jäger's primary weapon was a large-sized beam machine gun, which could either fire pulsed beam pellets or a single-shot long-range beam. It was able to use this weapon thanks to a tuned up, new model generator. The beam machine gun's low rate of beam deterioration, combined with its exceptionally accurate scope and the Jäger's latest fire control hardware and software, granted it unparalleled firing accuracy. As with other UMP mobile suits, the Gelgoog Jäger adopted standard 2nd Phase Production Type cockpit and manipulators, meaning it had the same control scheme as its peers and could use all of their weapons, reducing the required pilot training time for switching models and compensating for Zeon's lack of pilots.

The ZGMF-X191M2 ∞ Justice Gundam Type II is a mobile suit introduced in the animated film Mobile Suit Gundam SEED Freedom. It is piloted by Athrun Zala. An upgraded version of the ZGMF-X19A ∞ Justice Gundam, modified by Erica Simmons at the request of Cagalli Yula Athha. Originally made to test out the performance of the AMGS-X18P Cavalier Aifrid support craft, the Type II features enhanced performance over its predecessor. External changes to the Type II include a new head, new larger shoulders, changed skirt armors and legs, and the replacement of its signature horn's sensors with a beam blade emitter. A new panoramic cockpit has also been installed to improve the pilot's situational awareness. The main change to the Type II is the new M2X32E "Volantes" 4-winged sub-flight lifter developed off data from the EW454F Ootori Striker pack. It features enhanced flight performance and improved firepower, including additional beam saber emitters and missile launchers.

The GN-0000GNHW/7SG 00 Gundam Seven Sword/G (aka 00 Gundam Seven Sword/G, Seven Sword/G) is an upgraded variant of the GN-0000/7S 00 Gundam Seven Sword. Introduced in the side story Mobile Suit Gundam 00V: Battlefield Record, it is piloted by Setsuna F. Seiei.

Evangelion Production Model-02 (エヴァンゲリオン 正規実用型 2号機, Evangerion Seiki Jitsuyōgata Nigōki?) is an Evangelion unit appearing in Rebuild of Evangelion film series. It was introduced in Evangelion: 2.0 You Can (Not) Advance, piloted by Asuka Shikinami Langley, as well as briefly by Mari Makinami Illustrious during the battle against the Tenth Angel.

The KMK-B01 Kamiki Burning Gundam is a Gunpla introduced in Gundam Build Fighters Try. It is built and piloted by Sekai Kamiki.

The High Grade Gundam SEED (HG SEED) ZGMF-X56S/β Sword Impulse Gundam is a 1/144 scale kit released in 2005.

The High Grade Gundam SEED (HG SEED) ZGMF-X56S/β Sword Impulse Gundam is a 1/144 scale kit released in 2005.

The High Grade Gundam SEED (HG SEED) ZGMF-X23S Saviour Gundam is a 1/144 scale kit released in 2005.

The ASW-G-29 Gundam Astaroth is a mobile suit introduced in the manga Mobile Suit Gundam IRON-BLOODED ORPHANS Gekko. It is piloted by Argi Mirage. The Gundam Astaroth is one of the 72 "Gundam" Frames produced and used in the Calamity War, roughly 300 years ago. It is also one of 26 remaining Gundam Frames that survived the Calamity War and reported to be operational. The Warren family, a family affiliated with Gjallarhorn, owned the Gundam Astaroth but was forced to sell its armor and equipment when their financial situation went bad, with the suit's Gundam Frame eventually acquired by Tanto Tempo's Daddy Ted.  The Astaroth was then restored to operational condition by fitting its frame with a mix of parts from other mobile suits, and an example of this is that its left forearm armor and left shoulder armor are from a UGY-R38 Spinner Rodi. The two side waist armors are called Boost Armor, which has a wide range of movement and assists in the attitude/posture control of the mobile suit since the Astaroth's asymmetry affected its center of gravity.

The YF-21 is an experimental variable fighter featured in the Macross Plus OVA and its theatrical adaptation, Macross Plus Movie Edition. It was part of U.N. Spacy's Advanced Variable Fighter initiative under Project Super Nova. The prototype was piloted by Guld Goa Bowman.It ultimately lost to the YF-19, although a handful of its final version were still produced under special circumstances. The YF-21 served as a prototype for the VF-22 Sturmvogel II, which later appeared in Macross 7, often used by ace pilots.

The DyGenGuar (ダイゼンガー), also known as Bushin Soukou DyGenGuar (武神装攻ダイゼンガー | War God Armament Assault DyGenGuar) is a Banpresto Original Mecha debuting in The 2nd Super Robot Wars Alpha. It is the first Dynamic General Guardian unit. It is piloted by Sänger Sombold.

The Huckebein Mk-II (ヒュッケバインMk-II) is a Banpresto Original Mecha debuting in Super Robot Wars Alpha. Part of the Huckebein Series, it was developed from the Huckebein. Its data was later be used to develop the Mass-Production Huckebein Mk-II, as well as the Huckebein Mk-III. In OG, the 2nd Huckebein Mk-II unit was later rebuilt as the Huckebein Mk-II Trombe. The Huckebein Mk-II serves as the successor to the Huckebein, as well as serving as the basis for a new line of mass-production units. Learning from previous mistakes, the Mk-II was not equipped with an unstable Black Hole Engine but with a standard Fusion Generator (Alpha) / Plasma Generator (OG) instead. The PT recycles the Gespenst Mk-II series' G2 Frame as well as using various parts from the Gespenst Series for cost efficiency. The wing thruster units on the back are for stabilizing the mecha when gliding or jumping, and supposedly is also installed with a Tesla Drive (HG model kit settings only, never referenced in any of the games or anime). A Personal Fighter module is installed within the Mk-II's chest area, consisting of the head and the cockpit block, allowing for the pilot to make a quick escape from the battlefield if the situation forces so. Leaving aside the EOT aspects, the Mk-II could still perform well as an all-rounded high-end Personal Trooper similar to the Huckebein. Plus, to make up for the reduced firepower due to lacking the Black Hole Cannon, the Mk-II is equipped with the Gravicon System, which can be used to generate the defensive G-Wall or to fire the external G-Impact Cannon, a substitute for the Black Hole Cannon. Aside from being a mass-production prototype, the Huckebein Mk-II was also meant to be special unit used by telekinetic pilots to collect data, hence why the T-Link System is installed to interact with the pilot's telekinetic brainwaves, along with the hidden Uranus System, which kicks into action when both the pilot and the machine is in immediate danger, further drawing out the pilot's telekinesis abilities to the maximum limit and beyond.

The MSJ-121 Demi Trainer (デミトレーナー Demitorēnā?) is a mobile suit introduced in Mobile Suit Gundam the Witch from Mercury. Demi Trainers were developed for students of the Asticassia School of Technology, a school created for training personnel in the space development industry. The unit's design is stripped of all superfluous components, affording it superb maneuverability and serviceability. The MS can be modified by anyone with basic technical knowledge, giving it excellent potential for customization. In addition to these facets, Demi Trainers are said to be the best choice for those learning to pilot, making them an obvious choice for students at the school. If asked which MS they felt most comfortable with, students are most likely to answer, "Demi Trainer".

The MSZ-006 Zeta Gundam was the titular mobile suit of the anime Mobile Suit Zeta Gundam. It was also featured in the sequel series Mobile Suit Gundam ZZ.

The MSK-008 Dijeh (ディジェ Dije?) is a mobile suit introduced in the anime Mobile Suit Zeta Gundam. During the Gryps War, it was piloted by Amuro Ray.

The CB-0000G/C Reborns Gundam (aka Reborns Gundam, Reborns Cannon) is a transformable mobile suit introduced in season two of Mobile Suit Gundam 00 and is piloted by Ribbons Almark.

The GNW-002 Gundam Throne Zwei (aka Gundam Throne Zwei, Throne Zwei, Zwei) is a mobile suit featured in season one of Mobile Suit Gundam 00. It was initially piloted by Team Trinity's Michael Trinity, but was later stolen by Ali al-Saachez.

The ZGMF-2027/A GYAN Strom is a mobile suit introduced in the animated film Mobile Suit Gundam SEED Freedom. The ZGMF-2027/A GYAN Strom is a close-combat mobile suit built as the successor to the ZGMF-2000 GOUF Ignited, currently operated exclusively by Compass, with potential ZAFT adoption pending the results of its field tests. In order to keep costs down and make it easier to mass-produce compared to its more expensive predecessor, the GYAN Strom shares many common components with the ZGMF-2025/F GELGOOG Menace, and as a result shares many of the latter suit's features including Wizard System hardpoints and use of the new B.O.L.E.L.O flight packs for improved performance. Gyan Strom had two color sceheme, first color scheme is pale blue, dark blue and white accent color is the mass production color. Second is Agnes Giebenrath color scheme, which is comprise of white and sky blue accent color.