High Grade 1/144 Gundam

The CB-0000G/C Reborns Gundam (aka Reborns Gundam, Reborns Cannon) is a transformable mobile suit introduced in season two of Mobile Suit Gundam 00 and is piloted by Ribbons Almark.

The GNW-002 Gundam Throne Zwei (aka Gundam Throne Zwei, Throne Zwei, Zwei) is a mobile suit featured in season one of Mobile Suit Gundam 00. It was initially piloted by Team Trinity's Michael Trinity, but was later stolen by Ali al-Saachez.

The GN-000 0 Gundam (pronounced Oh-Gundam) is the first GN Drive equipped mobile suit in the Mobile Suit Gundam 00 series. It was piloted by Ribbons Almark and later by Lasse Aeon. The 0 Gundam was a general-purpose mobile suit developed during the Solar Power Wars, 15 – 20 years prior to the revelation of Celestial Being, and was completed around A.D. 2290. The first Gundam created by Celestial Being, it was also known as the first generation machine. Data obtained from it was used in creating the second generation Gundams such as the GNY-001 Gundam Astraea. Unbeknownst to the organization, the 0 Gundam's data was copied by Ribbons Almark and the Corner Family, who later used it to create the Throne series. Although Ribbons was once the 0 Gundam's pilot, he was not its official Gundam Meister as the suit did not switch its rollout color scheme (white, grey and yellow) to a custom one, a standard procedure whenever a Gundam has an official Meister. While the completion of the GN Drive was an important step in the establishment of GN Drive-equipped mobile weapons, it also required the development of ancillary technologies and materials like E-Carbon that is capable of withstanding the machines' high output. No matter how revolutionary a specific part is, it would not be able to demonstrate its full capabilities until surrounding technologies have also developed enough. As such the completion of the 0 Gundam was a triumph as it established the basic concepts and systems for later Gundams. This included the use of the GN Drive as the main engine unit, use of the GN Drive's high output to drive beam weapons, presence of clavicle antennae on the torso for controlling GN Particles, and head-mounted v-fin antenna as well as twin eye camera. Compared to later Gundams, the GN Drive's cone on the 0 Gundam's back was not only of a different design, it was also larger and protruded out more as the drive's ancillary/support systems were yet to be miniaturized. In terms of armaments, the suit has a Beam Saber, Beam Gun, and Gundam Shield for close to mid-range combat. During the Celestial Being's armed intervention in A.D. 2307-2308, the 0 Gundam was with the shadow support organization, Fereshte, who usually took out its GN Drive to power their Gundams. Fereshte eventually merged with the reborn Celestial Being, bringing the 0 Gundam along. The 0 Gundam's GN Drive was then removed and used in powering the GN-0000 00 Gundam, while the suit itself was stored in one of Celestial Being's resource satellites. The 0 Gundam was later pulled out of storage for combat deployment during the final battle with the Innovators. Since there was no GN Drive left to power it, the 0 Gundam was fitted with a large GN Condenser, also known as particle storage tank, that gave it limited operational time. It also had a new color scheme of red, blue and yellow, and was renamed as 'GN-000 0 Gundam (Type A.C.D.)' (Actual Combat Deployment) to differentiate it from its original form. This version uses the same armament as the original's. Later in the battle, the 0 Gundam (Type A.C.D) was abandoned by the backup Gundam Meister Lasse Aeon after its particle reserves were depleted. It was then found by Ribbons, who reactivated the Gundam one last time using a GN Drive he had cut off from the 00 Gundam.

The ZGMF-2027/A GYAN Strom is a mobile suit introduced in the animated film Mobile Suit Gundam SEED Freedom. The ZGMF-2027/A GYAN Strom is a close-combat mobile suit built as the successor to the ZGMF-2000 GOUF Ignited, currently operated exclusively by Compass, with potential ZAFT adoption pending the results of its field tests. In order to keep costs down and make it easier to mass-produce compared to its more expensive predecessor, the GYAN Strom shares many common components with the ZGMF-2025/F GELGOOG Menace, and as a result shares many of the latter suit's features including Wizard System hardpoints and use of the new B.O.L.E.L.O flight packs for improved performance. Gyan Strom had two color sceheme, first color scheme is pale blue, dark blue and white accent color is the mass production color. Second is Agnes Giebenrath color scheme, which is comprise of white and sky blue accent color.

The GN-0000+GNR-010 00 Raiser (aka 00 Raiser) is the combined form of GN-0000 00 Gundam and GNR-010 0 Raiser introduced in season 2 of Mobile Suit Gundam 00. Typically co-piloted by Setsuna F. Seiei and Saji Crossroad, the mobile suit could also be solely piloted by Setsuna.

The GN-009 Seraphim Gundam (aka Seraphim Gundam, Seraphim) is the successor to GN-004 Gundam Nadleeh introduced in Mobile Suit Gundam 00 season two. It was piloted by Tieria Erde.

The GNW-003 Gundam Throne Drei (aka Gundam Throne Unit Three, Throne Drei, Drei) is a mobile suit that appeared in Mobile Suit Gundam 00 and is piloted by Nena Trinity.

The GNW-003 Gundam Throne Drei (aka Gundam Throne Unit Three, Throne Drei, Drei) is a mobile suit that appeared in Mobile Suit Gundam 00 and is piloted by Nena Trinity.

The GNW-001 Gundam Throne Eins (aka Gundam Throne Eins, Throne Eins, Eins) is the lead mobile suit of Team Trinity and piloted by Johann Trinity in season one of Mobile Suit Gundam 00.

The ZGMF-2025/F GELGOOG Menace is a mobile suit introduced in the animated film Mobile Suit Gundam SEED Freedom. A mass-produced mobile suit produced by ZAFT as the successor design to the ZGMF-1000 ZAKU Warrior.

The Black Knight Squad is a Main Antagonist faction introduced in the animated film Mobile Suit Gundam SEED Freedom. The Black Knight Squad is the personal guard of the Kingdom of Foundation Queen Aura Maha Khyber, comprised of her governing administrators, military leader, and her royal guards.

The GFAS-X1 Destroy Gundam is a transformable heavy assault mobile suit introduced in the anime Mobile Suit Gundam SEED Destiny. As its name implies, the GFAS-X1 Destroy Gundam is built for only one purpose: massive destruction. Nearly three times larger than an average MS, it can destroy an enemy mobile suit by simply stepping on it. To accomplish its goal of mass destruction, the unit is equipped with a large array of weapons that allow it to singlehandedly devastate a large city like Berlin or take out an army of mobile suits and support crafts. Its designation, "GFAS-X", stands for "Gressorial Fortress Armament Strategic - EXperimental".Despite its large size, the Destroy Gundam requires only a single pilot unlike its predecessor, the YMAG-X7F Gells-Ghe. However, the pilot has to be a Biological CPU or someone with similar enhancements. The Destroy Gundam is classified as a transformable mobile suit, and usually launches in its MA mode which hovers over the ground at low altitudes through the use of backpack mounted thrusters. It can transform into MS mode by rotating its lower half 180 degrees, lowering the arms and flipping the backpack to the back.The suit's backpack is equipped with three weapons, including two twin barrel high-energy beam cannons, 20 thermal plasma composite cannons mounted around the backpack's circumference, and four 6-tube multipurpose missile launchers. Other weapons include head-mounted 200mm energy cannon and four 75mm CIWS, three chest-mounted 1580mm multi-phase energy cannons, and two detachable arms each equipped with a beam cannon and 5-barrel hand beam gun. The detachable arms function like DRAGOON Pods, allowing the suit to attack its target at any range, regardless of obstacles standing in the way. Aside from its vast array of offensive weaponry, the Destroy Gundam also carries defensive equipment in the form of three positron reflector shields, one in the backpack and usable only in MA mode, and two on the detachable arms.Due to its bulk, the Destroy Gundam has poor mobility and serves more as a movable gun platform. This weakness is often exploited by enemy units, particularly high mobility mobile suits piloted by ace pilots, to take the Destroy Gundam down by closing in and using close combat beam weaponry. Alternatively, DRAGOON Pods armed with beam spikes (such as the large DRAGOON Pods of the ZGMF-X666S Legend Gundam) can penetrate the Destroy's Positron Reflectors and quickly tear through the machine.

The AGP-X1/E3 Alus Earthree Gundam (アルスアースリィガンダム?) is a variant of the Alus Core Gundam that appears in Gundam Build Divers Re:RISE and is piloted by Alus. It can also be piloted by the Guard Eye, and in this state, it is known as Eldora Earthree Gundam. The Alus Earthree Gundam was created independently by Alus through analyzing Hiroto's PLANETS System and is developed based on the combat data of the Earthree Gundam. It thus has the same exact structure as the Earthree Gundam and is likewise formed through the docking of the central Alus Core Gundam with the Alus Earth Armor. Its capabilities are also similar to the Earthree Gundam's, being most effective when used with a basic battle style and is capable of handling any situations. Like the Alus Core Gundam, the sensor on the Alus Earthree Gundam's head glows red when it is controlled directly by Alus. This glow is not present when the machine is operated by the Guard Eye, and in this state, it is known as Eldora Earthree Gundam.

The PFF-X7II/U7 Uraven Gundam (ユーラヴェンガンダム?) is a Gunpla introduced in Gundam Build Divers Re:RISE. A variant of the PFF-X7II Core Gundam II, it is built and piloted by Hiroto Kuga. It is known as PFF-X7/U7 Uraven Gundam when used with the PFF-X7 Core Gundam. A form of the Core Gundam II docked with the Uranus Armor, the Uraven Gundam specializes in long-range sniping and was built under the concept of enabling high-precision sniping in all situations. The Earthree Gundam was chosen as its base design due to its all-round features, and was tuned to specialize in shooting while having abilities that made it more than competent in regular combat. The Uraven Gundam can deploy Sensor Bits equipped with multi-sensors around itself, enabling it to perform ultra-high-precision sniper attacks with its Beam Shoot Rifle U7. The Uraven Gundam originally has the Core Gundam as its central unit, the current use of the more powerful Core Gundam II enhances its overall power.

The GAT-04+AQM/E-A4E1 Jet Windam is a variant of the GAT-04 Windam introduced in the anime Mobile Suit Gundam SEED Destiny. A custom unit is piloted by Neo Roanoke.

The RGZ-95 ReZEL is a mass-production transformable mobile suit. It is featured in the novel and OVA version of Mobile Suit Gundam Unicorn. One of these units is piloted by Riddhe Marcenas.

The MBF-M1 M1 Astray is a mass-produced mobile suit of the Orb Union introduced in the anime Mobile Suit Gundam SEED.

The SBG-E01 Shin Burning Gundam (SBG-E01 神バーニングガンダム Shin Bāningu Gandamu?) is a Gunpla introduced in Gundam Build Metaverse. An upgraded version of the KMK-B01 Kamiki Burning Gundam, it is builted and piloted by Sekai Kamiki.

The NOG-M1A1 Black Knight Squad Shi-ve.A is a mobile suit introduced in the animated film Mobile Suit Gundam SEED Freedom. An advanced high-performance mobile suit developed by the Kingdom of Foundation using ZAFT technology, designed to specialize in close combat. It utilizes many advanced technologies, such as the new Femto Technology Armor to defend against beam weaponry.

The GN-001REII Gundam Exia Repair II (aka Gundam Exia Repair II, Exia Repair II, Exia R2) is the repaired and upgraded version of the GN-001RE Gundam Exia Repair. Appearing in Mobile Suit Gundam 00 season 2, it is piloted by Setsuna F. Seiei. For the final battle against the Innovators, the reborn Celestial Being deployed all usable mobile suits they have, including the Exia Repair II (aka Exia R2) that served as a spare machine for Setsuna F. Seiei. Built from the wreckage of the Exia Repair by a team of mechanics led by Ian Vashti, the Exia R2 incorporated the latest technology and is more powerful than its predecessors.The light purple-colored GN Cables on the exterior of the original Exia and Exia Repair are now mostly stowed in the Exia R2's armor. These cables facilitate the supply of GN Particles, and thus energy, to each part of the Gundam instantaneously, and are also used for attitude control due to the particles' mass reduction effect. The internalization of these cables resolves the defensive concerns regarding their previously exposed placements, improving the Exia R2's defensive capability. The Exia R2 also has enhanced mobility as additional thrusters are installed on various parts of its body.Due to the proliferation of GN Drive Taus, it is now much more difficult to overwhelm enemy machines compared to before. To counter this, the Exia R2 has been reworked into a "one-hit-kill" machine. It is armed with a GN Sword Kai, two GN Beam Sabers a pair of GN Vulcans, and a GN Shield. Overall attack power is enhanced thanks to the GN Sword Kai, a powered up version of the original Exia's GN Sword. However, this focus on singular attack power resulted in decreased comprehensive battle strength as the total number of swords is reduced from the original Exia's seven to the current three.Like the original Exia, the Exia R2 has an "Over Boost Mode" that temporarily boosts its capabilities. The Exia R2's primary tactic is to combine a single GN Sword Kai attack with the "Over Boost Mode" to defeat the enemy quickly, and this was successfully employed against the GN-000 0 Gundam. A damaged Exia R2 was recovered after the battle, but its GN Drive was damaged beyond repair by 0 Gundam's attack. It was then repaired into the GN-001REIII Gundam Exia Repair III, powered by a particle storage tank.