Master Grade 1/100 Gundam

The ZGMF-X19A ∞ Justice Gundam (aka Infinite Justice, Justice) is the successor to the ZGMF-X09A Justice Gundam introduced in the anime Mobile Suit Gundam SEED Destiny. It is piloted by Athrun Zala. Developed as a successor to the ZGMF-X09A Justice Gundam, the ZGMF-X19A ∞ Justice Gundam also incorporates technology from ZAFT's Second Stage Series such as the Variable Phase Shift armor. Adjustments were made to reflect Athrun Zala's combat data, practically making the ∞ Justice his dedicated mobile suit. The ∞ Justice's close combat capability is enhanced over its predecessor's and is armed with a number of unique weapons such as leg beam blades and a carrier beam shield that is a combination of a beam shield, a beam boomerang and a grapple stinger.The ∞ Justice carries on its back a flight unit that can be deployed as a separate support unit/subflight unit. This Fatum-01 is an improved version of the original Justice's Fatum-00 with higher overall performance, and is armed with a pair of beam cannons as well as several beam blades. The suit can dock with the METEOR unit for additional firepower as well as speed, and can fire at multiple enemy units simultaneously using the Multi Lock-On System. As with the Justice, ∞ Justice is design to operate alongside another mobile suit, in this case, the ZGMF-X20A Strike Freedom Gundam, and is stationed on board the warship Eternal. Like the Strike Freedom, the ∞ Justice is equipped with Neutron Jammer Canceller, Hyper-Deuterion Engine, and has joints as well as inner frame made of PS armor materials.The Hyper-Deuterion Engine is a new type of nuclear reactor and due to its massive output, the ∞ Justice has extremely high mobility and maneuverability. Meanwhile, the phase-shifting of its joints and inner frame as a result of the PS armor materials give them strength and near human flexibility while also enhancing the suit's combat abilities. Additionally, the ∞ Justice is able to discharge excess residual energy within the body through the joints' glowing effect, which is silver instead of Strike Freedom's gold. The ∞ Justice has a shorter V-fin than its predecessor as the performance of the sensor unit within the head crest has been greatly enhanced.

The MSM-07 Z'Gok (ズゴック Zugokku?) is a mass-production amphibious mobile suit introduced in the anime Mobile Suit Gundam. The MSM-07 Z'Gok is one of the heavy mobile suit developed by MIP. Like the MSM-04 Acguy, it is viewed as a second-stage amphibious MS, different from the MSM-03 Gogg, a first-stage unit. The Z'Gok's final design was improved based on actual combat data from the Gogg, but this delayed its development and the Acguy was completed before it.Among amphibious mobile suit, the Z'Gok's focus is on ground combat. Besides using both air and water-cooled radiators, it also has chemical fuel rockets for jumping in addition to thermonuclear water jets. The Z'Gok is also designed so that it can perform anti-air combat as well as search operations on and above the water surface, duties that the Gogg could not.The Z'Gok's specifications are superior to those of the mass production mobile suits by the Earth Federation Forces at the same period. However, in return for high performance, it is difficult to pilot. Furthermore, it is a costly machine because it lacks parts compatibility with the Gogg.

The GAT-X105B/FP Build Strike Gundam Full Package is a Gunpla from the anime series Gundam Build Fighters. It's built by Sei Iori and primary controlled by Reiji. The GAT-X105B/FP Build Strike Gundam Full Package is a Gunpla built by Sei Iori, and is a combination of the basic GAT-X105B Build Strike Gundam with the Build Booster and new weapons. As indicated by the name, it can be considered as the Build Strike with its complete weapons and equipment. The Build Booster is a support craft that when attached to the Build Strike adds a pair of Large Beam Cannons to the unit's standard armaments of four head-mounted Vulcan Guns and two Beam Sabers, and also improves its output.[1] The Full Package also gives the Build Strike a Chobham Shield and a Beam Gun that can transform into a Beam Rifle, and later into the Enhanced Beam Rifle.

The XXXG-01Wfr Gundam Fenice Rinascita is a custom Gunpla and the successor of the XXXG-01Wf Wing Gundam Fenice from the anime series, Gundam Build Fighters. The Gunpla is modeled and primary controlled by Ricardo Fellini. The XXXG-01Wfr Gundam Fenice Rinascita is the upgraded form of Ricardo Fellini's XXXG-01Wf Wing Gundam Fenice after it was severely damaged during his loss to the Qubeley Papillon at the semi-finals. The Gundam Fenice Rinascita is greatly modified compared to its predecessor, the trademark asymmetrical design has been forgone entirely and it sports new custom parts all over its body. The suit also gained several new weaponry, and its transformation capability has been restored as well. The latter allows Gundam Fenice Rinascita to carry out high speed travel after changing into Flight Mode.

The RX-0 Unicorn Gundam (ユニコーン ガンダム Yunikōn Gandamu?, or Unicorn, Unicorn Gundam 01, Singularity One) is the titular prototype mobile suit of the Mobile Suit Gundam Unicorn novel, its OVA adaptation and the television re-cut. Developed by Anaheim Electronics for the Earth Federation, it concealed a secret that could shake the future of all humanity, for it was the key to opening Laplace's Box. It is piloted by Banagher Links after the head of the Vist Foundation and his father, Cardeas Vist, entrusted it to him at the dawn of the Third Neo Zeon War in U.C. 0096.Produced as the final part of the E.F.S.F's reorganization plan, the "UC Project", the Unicorn Gundam is a revolutionary design meant to be the main symbol of the project's main goal: to destroy any traces of Zeonism in the Earth Sphere. Thus, not only does it feature a Gundam design, but it also incorporates an anti-Newtype system. Two prototype machines were completed at Anaheim Electronics' factory in Granada. However, when the Vist Foundation took control of the project, they installed a special "La+ Program" OS into the Gundam, turning it into a symbol of possibility by making it the key to finding Laplace's Box: the embodied hope of the Universal Century. Featuring the most advanced mobile suit technology of the time, its performance is unmatched.Incorporating test data from the experimental MSN-06S Sinanju Stein, the Unicorn Gundam's entire frame is built with Psycho-Frame material, drastically increasing the unit's responsiveness and allowing it to be piloted like an extension of the pilot's body. While mobile suits used during the Second Neo Zeon War implemented psycho-frame technology on a limited basis, the Unicorn is the first "full psycho-frame" mobile suit. In some cases, this responsiveness is so high that the machine appears to act on its own without any actions from the pilot. In addition, the Unicorn utilizes a special system known as the "NT-D" (or Newtype Destroyer) which activates the suit's psycho-frame and dramatically increases the suit's performance.In its normal form, the "Unicorn Mode", the Unicorn Gundam's head is similar in appearance to those of Londo Bell's mass-produced mobile suits, with the addition of a single, horn-like antenna on its forehead (which gives it the name "Unicorn"). Destroy Mode is the form when Unicorn Gundam's NT-D System is activated. The transformation is marked by an expansion of the suit's frame. The armor seams separate and lock down into various hard-points, while the newly exposed psycho-frame emits a pinkish-red or greenish (Awakened) glow (attributed to the Psycho-Field phenomenon). In this mode, the Unicorn becomes taller, reveal six more thrusters, and its head transforms to one with standard Gundam features, the visor and face guard retracts into the head to reveal the twin eyes and mouth plate, and the antenna splitting into a V-fin. To prevent its transformation being interrupted, the strength of its I-Field will be increased temporarily. Additionally, a pair of sub-sensors are revealed on the shoulders, and two concealed beam sabers extend out of the backpack.In Destroy Mode, the suit's psycho-frame scans the pilot's thoughts and directly transmits them to the suit's drive system; in other words, the Unicorn can be controlled by the pilot's thoughts alone. Additionally, the mode also causes the machine's performance - in thrust, generator output, and sensory radius - to be increased to unmeasurable levels. The NT-D also allows the Unicorn to take control of an enemy's psycommu weapons (also known as "Psycommu Jack") by emitting a Psycho-Field. However, the stress placed on the mind by manipulating an object more than tenfold the size of an average human is extraordinary. Even with the aid of the psycho-frame, the pilot's mind can only endure roughly five minutes of operation before a limiter is activated, deactivating the psycho-frame and returning the mobile suit to its Unicorn Mode.With the performance limiters disengaged, the Unicorn can accelerate up to 20 G's in Destroy Mode; to alleviate such high levels of G forces placed on the pilot, a drug administration system called the "DDS" is fitted on the pilot suit. It suppresses stagnated blood circulation due to high acceleration by administering the drug to the pilot. Furthermore, the DDS activates automatically upon the detection of another Newtype via the "Intention Automatic System".

The ZGMF-X56S/α Force Impulse Gundam is a Mobile Suit introduced in the anime Mobile Suit Gundam SEED Destiny. It is piloted by Shinn Asuka and later by Lunamaria Hawke. The ZGMF-X56S/α Force Impulse Gundam is the ZGMF-X56S Impulse Gundam equipped with the α Force Silhouette pack. The Force Impulse is a general purpose MS like the original Impulse, but has extremely high mobility under gravity and in zero gravity due to the Force Silhouette's high output thrusters and large wings. This pack also enables atmospheric flight, and adds a pair of beam sabers to the Impulse's standard armaments, granting the Force Impulse high melee and ranged combat capabilities. The Force Impulse is the most commonly used form of the Impulse due to its high versatility, and it is said that its aerial combat capabilities are equivalent to the ZGMF-X10A Freedom Gundam's. The Force Impulse retains the same VPS colors as the original Impulse.

The GF13-001NHII Master Gundam is a mobile fighter introduced in the anime Mobile Fighter G Gundam. A state-of-the-art mobile fighter made by Neo Hong Kong, and a developmental improvement of the Kowloon Gundam. Its body is made up of DG cells, allowing it to disguise itself as the Kowloon Gundam. Although its body is made up of DG cells, it is completely controlled by Master Asia's strong mental power, so it does not self-propagate or self-evolve, and uses its abilities only for self-regeneration. This machine has strong characteristics as a dedicated fighting machine developed from the Kowloon Gundam, and its flexible joint structure and thrusters allow it to move in a variety of ways, reproducing many of the techniques of Master Asia. It is a member of the Devil Gundam Legion, and is treated as the leader of the Four Heavenly Kings subgroup that consisted of four Gundams.

The MSZ-010 ΖΖ Gundam (aka ΖΖ Gundam, ZZ; pronounced "Double Zeta") is the titular mobile suit of the anime Mobile Suit Gundam ZZ and is piloted by Judau Ashta. A direct development of the MSZ-006 Zeta Gundam, the ΖΖ Gundam, which had been completed through a prototype, was given the development code "θ" (thus also known as the "θ Gundam") as it was the sixth "Anaheim Gundam" after the RMS-099 Rick Dias (also known as “γ Gundam”). The development plan of the ΖΖ Gundam existed two years before the completion of the Zeta Gundam but was shelved due to internal competition and production delays. However, the performance advantage of the Zeta Gundam against new Titans mobile suits did not last long, and so development of the ΖΖ Gundam was resumed.The ΖΖ Gundam sought to reproduce the operating functions of the RX-78-2 Gundam and the G-Armor in a single machine. An advanced form of the RX-78-2 Gundam's Core Block System was also introduced. As a result, the ΖΖ Gundam can transform into a mobile armor form called the G-Fortress, which acts as a heavy combat bomber and for cruising in space and on earth. The ΖΖ Gundam can also separate into two independent fighter units, called the Core Top and Core Base. The Core Base, consisting of the ΖΖ's lower body and backpack, is operated through the FXA-07GB Neo Core Fighter attached to its front. The Core Top, consisting of the ΖΖ's upper body and double beam rifle, is operated through the cockpit in its nose unit or more frequently through the Neo Core Fighter, which is in its Core Block form, attached to the lower rear.The team on board the "Argama" typically operates the ΖΖ Gundam with a third Neo Core Fighter piloted by the Gundam's main pilot, Judau Ashta. When combining into the ΖΖ Gundam, forming the G-Fortress mode is the first step and consists of the Core Top and Core Base ejecting their Neo Core Fighters to dock with Judau's Neo Core Fighter in Core Block form. When transforming from the G-Fortress mode to MS mode, the large verniers in the arms and legs are retracted. However, this does not reduce total thrust as the surplus output is supplied to the attitude control thrusters distributed throughout the body and the number of operable thrusters are actually increased. Other parts that move during transformation include the flexible wing binders that also serve as arm-mounted wings shields, the shoulder thruster binders, the large backpack, etc.The engine installed in the backpack is originally meant for ships and could supply power for an entire ship. It also functions as the main thruster unit of the ΖΖ Gundam when in MS form, generating thrust equivalent to that of a large ship. The ΖΖ Gundam's armor is a multi-spaced structure composed of Gundarium γ alloy, capable of withstanding a mobile suit explosion at close range and resisting high water pressure. While it is impossible to completely defend against a direct hit of a mega particle beam, the wings shields are strong enough to prevent a direct hit on the cockpit.With its overall height limited to around 20 meters as requested by AEUG to maintain mobility, the ΖΖ Gundam's design also incorporated the movable frame and magnet coating technology. The generator output which had caused problems during early stages of ΖΖ's development was resolved by incorporating three compact, high-output generators. The movable modules and armor parts, which have a multi-layered structure, are connected by hinges and slide rails which have magnet coating, making them flexible and robust while allowing instantaneous transformation of the ΖΖ Gundam. However, the complexity of the system resulted in poor maintainability and productivity also deteriorated.The control system of the ΖΖ Gundam is equipped with a Bio-Sensor, which is a simplified Psycommu system, as an interface for Newtype pilots. An improved version of the Biosensor installed in the Zeta Gundam, it improves the responsiveness of the mobile suit by supporting the control system with the pilot's brainwaves. However, as a protective measure, the Biosensor is inactive when a pilot with low Newtype abilities boards the ΖΖ Gundam. The unit is mounted in the ΖΖ Gundam's Core Block and the synchronization of the device is improved by inputting the brainwave patterns of the Neo Core Fighter's pilot.The ΖΖ Gundam has a number of powerful weaponry, including two hyper beam sabers which are also usable as beam cannons, a double beam rifle, a 21-tube missile launcher installed on the backpack, and a high mega cannon on the forehead. While the ΖΖ has a very destructive arsenal, its weapons systems require a high level of energy. As a result, the ΖΖ often found itself almost completely drained of power after using its high mega cannon. The ΖΖ Gundam's structural issues due to its complicated construction and transformation systems were eventually corrected with the MSZ-010S Enhanced ZZ Gundam and its massive final upgrade FA-010S Full Armor ZZ Gundam.

The MBF-02+EW454F Strike Rouge Ootori is a variant of MBF-02 Strike Rouge introduced in the HD Remaster of the anime Mobile Suit Gundam SEED Destiny. It is primary piloted by Cagalli Yula Athha, and later by Kira Yamato. The Strike Rouge Ootori is the Strike Rouge equipped with the multi-purpose EW454F Ootori Striker, which Morgenroete Inc. has been developing since the first war. The Ootori Striker is a striker pack based on the P202QX IWSP (Integrated Weapons Striker Pack) and is also meant to allow a MS to handle various situations without changing equipment. However, it has a simpler structure leading to better reliability and ease of maintenance.Compared to the Aile Striker, Ootori Striker's flight system is a vast improvement as it is capable of powered flight in the atmosphere. The pack is equipped with a beam launcher, railgun, large anti-ship sword, missile launcher and several wing-mounted missiles. The droptanks on the bottom wings contain a stealth support system that utilizes mirage colloid but not much detail is known. In addition, the Ootori Striker can function as an independent unit when it is separated from the Strike Rouge.

Bandai China 2023 Limited Edition MG 1/100 Cross Contrast Colors Gundam Epyon Bandai China Estimated Release Date: December 2023 Grade: MG Scale: 1/100 Please read our Preorder FAQ carefully before placing the order.  

The MSZ-006 Zeta Gundam was the titular mobile suit of the anime Mobile Suit Zeta Gundam. It was also featured in the sequel series Mobile Suit Gundam ZZ. Developed as part of Project Zeta, a third generation mobile suit development plan launched by Anaheim Electronics upon request from the AEUG, the Zeta Gundam was a revolutionary Transformable Mobile Suit (TMS). While Anaheim's previous attempt at creating a TMS, the MSN-001 Delta Gundam, failed due to issues with its transformable movable frame, the Zeta Gundam solved this problem by studying the design concept of the RX-178 Gundam Mk-II's movable frame, which had an excellent basic design. In addition, it adopted Gundarium γ alloy armor, previously used on Anaheim's RMS-099 Rick Dias.The Zeta Gundam was capable of transforming into a cruising mode known as "Wave Rider Mode". In this form, the Zeta Gundam adopted a wedge shape, concentrating the shockwave generated by supersonic flight underneath it and riding the resulting wave, hence its name. In this form, it was capable of entering the atmosphere without any optional equipment thanks to the Flying Armor mounted on the movable frame on its back, which protected it from shockwave and heat during atmospheric entry. The Flying Armor was based on data from the support vehicle of the same name, and could be replaced with other equipment, such as the Wing Binders for the Wave Shooter specification. The Wave Rider Mode could also function as a sub-flight system for other mobile suit.Due to the Zeta Gundam's complex transformation mechanism, it was impossible to mount generators in its upper body. Instead, it was equipped with a generator in each shin, a design concept inspired by the RX-78GP01-Fb Gundam "Zephyranthes" Full Burnern. Its legs were also installed with thermonuclear jet/rocket hybrid engines, which were capable of functioning both in space and in the atmosphere, allowing the Zeta Gundam to engage in aerial combat immediately after atmospheric entry.The Zeta Gundam's weapons were highly systematic and presented almost no hindrance when carried. It was armed with a pair of head-mounted vulcan guns, a pair of beam sabers stored in the side skirt armor that served as beam guns in Wave Rider Mode, a pair of forearm-mounted grenade launchers, an E-pac powered beam rifle, a shield attached to the left forearm that served as the Wave Rider Mode's nose unit, and the Hyper Mega Launcher, a powerful beam weapon developed from the MSN-00100 Hyaku Shiki's Mega Bazooka Launcher. Thanks to these weapons, it was capable of handling nearly all battlefield situations.Finally, the Zeta Gundam was equipped with the Bio-Sensor, a Quasi-Psycommu device that assisted with the mobile suit's controls using the pilot's brainwaves, improving its responsiveness. Though details about this device was unclear, there were instances of it allowing the Zeta Gundam to demonstrate abilities beyond its specifications during combat. Overall, the Zeta Gundam had exceptionally high operability and was regarded as a masterpiece of the Gryps Conflict era.

The XXXG-00W0 Wing Gundam Zero (ウイングガンダムゼロ EW Uingu Gandamu Zero?) (aka Wing Zero) is a mobile suit that appears in the OVA/movie Mobile Suit Gundam Wing Endless Waltz and the manga Mobile Suit Gundam Wing Endless Waltz: Glory of the Losers. Wing Zero was based on the Zero Frame technology developed by the five Gundam Scientists, which was an inner frame with all the necessary components for the mobile suit to operate, completely separate from the armor platings and energy conduits for weapons. The performance of the frame itself surpasses that of the OZ-00MS Tallgeese, and the complete separation of armor and internal structure allows Wing Zero to continue fighting after losing up to 90% of its armor.[1]In the Glory of the Losers manga, Wing Zero is developed from the wreckage of the destroyed Wing Gundam Proto Zero, and upgraded with wing binders from the OZ-00MS Tallgeese Flugel. It combines the armament and equipment of the TV version and the EW version, such as having a shield and being able to transform into Neo-Bird Mode.

The XXXG-0SR Gundam Sandrock (aka Sandrock , Gundam Zero-Four or Sandrock Ver.Ka.) is a mobile suit from the manga Mobile Suit Gundam Wing Endless Waltz: Glory of the Losers and is piloted by Quatre Raberba Winner. The Sandrock was constructed by Instructor H in the L4 colonies under the financial support of the Winner family. Designed for operations on land, especially in a desert environment, it has high combat capabilities and excels in melee combat with its strong armor that is more robust than other Gundams'. In addition, it has advanced communication and information analysis systems as it was designed as a commander unit and tasked to be the core of the command system for the Maganac Corps and the five Gundams. Following its self-destruction and then restoration by the Maganac Corps, the Sandrock was painted in a new bluish-purple color scheme.

GNT-0000/FS 00 Qan[T] Full Saber (aka 00 Qan[T] Full Saber, pronounced "Double-Oh Quanta Full Saber") is a variant of the GNT-0000 00 Qan[T]​ that appeared in Mobile Suit Gundam 00V: Battlefield Record. The 00 Qan[T] Full Saber is the 00 Qan[T] equipped with the GN Sword IV Full Saber equipment, which is supposed to function like the GNR-010 0 Raiser, to adjust the synchronization of GNT-0000 00 Qan[T]​'s twin drive system. However, since tests showed that the Qan[T]'s GN drives can be be fully synchronized without the need of adjustments, the GN Sword IV Full Saber became unnecessary and is not equipped on the suit even though it has been manufactured. Unlike the backpack-like structure used in the normal 00 Qan[T]​, a more traditional cone GN Drive chassis is used on the Full Saber. Both the GN Sword IV Full Saber and the GN Shield are physically connected to this alternate backpack in a style more reminiscent of its predecessor 00 Raiser. As a result, the GN Sword IV Full Saber on the right side can help to balance out the GN Shield on the left and thus maintain the suit's balance during combat. The 00 Qan[T] Full Saber setup is also equipped with two new weapons. First is the GN Sword IV, which can transform into 5 different modes for carrying different kinds of attacks. Second is the GN Gunblades, three dagger-like blades attached to the GN Sword IV which can be used in three different forms.

The GN-0000/7S 00 Gundam Seven Sword (aka 00 Gundam Seven Sword, 00 Seven Sword), is a weapons pack/equipment variation for the GN-0000 00 Gundam that appeares in the Mobile Suit Gundam 00V side story. It is later given a additional weapon and re-designated as GN-0000GNHW/7SG 00 Gundam Seven Sword/G. With Celestial Being (CB) rebuilding their organization after their defeat in A.D. 2308, they began development of the 3.5 and 4th generation Gundams. The lone 4th generation Gundam, the GN-0000 00 Gundam, had undergone continuous beta testing of its experimental Twin Drive System by members of CB's engineering team and Tieria Erde. The original 00 Gundam was made as a close combat mobile suit, normally equipped with its GN Sword II. However, CB soon realized that the 00's basic arms would not be enough to counter the rapidly advancing mobile suits developed by the Earth Sphere Federation. Taking inspiration from the GN-001 Gundam Exia's diverse Seven Sword System, CB engineers created the Seven Sword package for the 00 Gundam, improving the units effectiveness in close combat while also attempting to stabilize the Twin Drive System.The original Seven Sword System was designed specifically for the Gundam Exia. Armed with one GN Sword, two GN Blades, two GN Beam Sabers and two GN Beam Daggers, the package was meant bring out the full close combat fighting strength of the Exia. Coupled with the close combat fighting style of its Gundam Meister Setsuna F. Seiei, Exia served its role as the close combat Gundam prior to is disappearance after A.D. 2308. Seeking to do the same with the 00 Gundam, CB engineers incorporated a mix of technologies into the 00 Gundam's Seven Sword armament. Befitting its name, the 00 Gundam Seven Sword was armed with 7 close combat weapons; the experimental GN Katars, the standardized GN Beam Sabers, the long and short GN Sword IIs, and the large GN Buster Sword.The 00's GN Beam Sabers were significantly improved from the Exia's. Originally, Exia had a set of four beam blades, a pair of daggers and a pair of normal beam sabers. While they were helpful in a few situations, the sabers' lengths were non-adjustable for differing combat situations. With that in mind, CB engineers created the beam sabers to be adjustable in length, increasing their overall efficiency in combat.The GN Katars are mounted on the sides of the 00 Seven Sword's kneecaps, which must be exchanged with the standard white kneecaps to properly holster the weapons. The design is taken from the famous Indian weapon, as well as the 00's GN Shields. The GN Katars are meant as push daggers for stabbing into an enemy. To enhance their capabilities, CB engineers equipped the katars with GN Particle infused blade edges, consisting of the material used in GN Condensers. While attacking, the particles surrounding the katar are converted to heat, and the heat is transferred to the object the katar comes into contact with. However, the heat generated by the particles can be too much for the katars themselves to tolerate. The experimental weapons inspired a line of other condenser infused weaponry for the next generation of Gundams.Taking a design cue from the Exia's GN Blades, CB engineers created the GN Sword II Long and GN Sword II Short. While both swords are physical exaggerations of the aforementioned blades, they vastly differ in function. The GN Sword II is more of a traditional broadsword, able to switch between rifle and sword mode faster than the original Exia could. The long GN Sword II focuses on ranged combat, the only such weapon in the 00 Seven Sword arsenal to do so. The drawbacks are that the long sword uses more particles and a decreased rapid fire capability. In contrast, the GN Sword II short was developed analogous to the GN Short Blade from the Exia. The shortest sword in the Seven Sword armament, the Short Sword's blade tip is attached to a wire, which can be shot out towards an enemy and retracted quickly. Despite these armaments, the signature weapon of the Seven Sword arsenal is the GN Buster Sword.At nearly the same height as the 00 Gundam, the GN Buster Sword is a massive weapon which serves multiple purposes. CB engineer Ian Vashti analyzed the Buster Sword of a GNX-607T/AC GN-XII Sword captured by Fon Spaak in the sword's development. Normally stored on the left GN Drive mount, the GN Buster Sword can expand its frame to particle vents to create a massive GN Field. The scope of the field is so large that it can protect allied suits. When the sword is actively wielded, it is a top class melee weapon. Though the array of weapons were tailored to suit the fighting style of Setsuna F. Seiei, the Meister as well as his Gundam, had been missing during the Seven Swords' development. On top of that, the pack did not stabilize the highly unstable Twin Drive System, and a separate support unit, the GNR-010 0 Raiser, was given a higher priority than the Seven Swords. However, CB hadn't forgotten about the Seven Swords configuration.After the battle with the Innovators, the 00 Gundam had taken some damage, but the greater concern was the fact that its GN Drives were critically damaged in the duel between the GN-000 0 Gundam and the GN-001REII Gundam Exia Repair II. With the 5th generation Gundams in construction, CB developed a modified version of the 00 Gundam Seven Sword, the GN-0000GNHW/7SG 00 Gundam Seven Sword/G as a test-bed for future weapons and systems.

The MBF-02VV Gundam Astray Turn Red is a Mobile Suit appearing in the Mobile Suit Gundam SEED Destiny Astray R photonovel. The Gundam Astray Turn Red is a mobile suit created by Valerio Valeri for his own use. However, since the suit is fully controlled by the combat AI called "80", he does not need to do any actual piloting, although he still sits in the cockpit. The suit has a custom head unit and backpack. Its main body is constructed using MBF-P0X Gundam Astray Noir's spare parts and its body color is basically a reverse of MBF-P02 Gundam Astray Red Frame's (hence the suit's name).The Turn Red is usually armed with a pair of head-mounted CIWS and a pair of Tactical Arms on its back, but it can also be equipped with the same type of beam rifle, beam sabers and shield as the Red Frame. It also carries additional power packs for the Tactical Arms like MBF-P03secondL Gundam Astray Blue Frame Second L. The mobile suit is supposed to be used alongside CAT1-VGR Hyperion GR and CAT1-VGL Hyperion GL, both are commandeered by the Turn Red itself and serve as its protectors during battle. The Turn Red is installed with the Trio System to improve its cooperation with the other two AI-controlled suits.

The MBF-P03D Gundam Astray Blue Frame D is a variant of the Gundam Astray Blue Frame Second L/G in the novel Mobile Suit Gundam SEED Destiny Astray B. It is piloted by Gai Murakumo. Produced in the Ame-no-Mihashira's factory by Gai, the Gundam Astray Blue Frame D is a close combat unit created to battle Dante Gordigiani's MBF-P0X Gundam Astray Noir. Although it is a variant of the Blue Frame Second L and Astray Blue Frame Second G, the Gundam Astray Blue Frame D swaps out most of their parts for parts of the original Blue Frame. Newly designed parts are also fitted in some areas and a striker pack connector has been added to the suit's back so that it can mount the Vouivre Striker, a modified AQM/E-X01 Aile Striker. The suit is armed with 10 blades and gives the impression that it is designed to get close to the enemy using the powerful output from the Vouivre Striker and then engaged in close combat. However, these blades are actually DRAGOONs with unique abilities and most of them can also be used as handheld weaponry. Gai later upgrades the suit with a pair of blade guns that are mounted underneath the arms.

The MS-14S (YMS-14) Gelgoog Commander Type is a commander mobile suit that entered production as the MS-14A Gelgoog. Featuring a high-powered generator, various thrusters to aid mobility, a large pointed oval-shaped shield, a Beam Rifle, and a Beam Naginata, the MS-14S Gelgoog Commander Type rivals the capabilities of the Earth Federation's RX-78-2 Gundam. In fact, compared to the Gundam, the Gelgoog Commander Type is slightly faster, more mobile and possesses a more powerful generator and beam weapon selection; this was proven by Char during his first sortie in his personal unit against Amuro Ray's Gundam during the One Year War. On the other hand, it has thinner and less durable armor than the Gundam (which is built with Luna Titanium Alloy), and the lack of built-in weapons makes the Gelgoog easier to disarm (which Amuro literally did) and leave weaponless.

The MSN-06S Sinanju Stein (aka Sinanju Stein) is a mobile suit featured in the PlayStation 3 video game Mobile Suit Gundam UC and UC-MSV. Built from the data of both the MSN-04 Sazabi and RX-93 ν Gundam, the Sinanju Stein was developed as part of the Earth Federation Forces reorganization plan known as the "UC Project". Stein means "stone" in German and Norwegian, and the Sinanju Stein's name was a reference to it being "a jewel in the rough". This mobile suit was created by Anaheim Electronics to test the sensitivity and durability of the lightweight and rigid material, the Psycho-Frame, for use in a mobile suit's internal movable frame. The Sinanju Stein was also equipped with a Psycommu system, and the "Intention Automatic System", which functions by using the Psycho-Frame's sensitivity to the pilot's thought-waves to directly affect behavior of the mobile suit.The suit boasts high mobility and features flexible thrusters on its legs and backpack, allowing it to achieve precise movements at high speeds. Due to its murderous acceleration, it was impossible for ordinary pilot to control the Sinanju Stein, and its evaluation tests were conducted on autopilot to test the limits of the Psycho Frame. Therefore, the Sinanju Stein can be said to be a defective machine for humans to pilot, but in reality, it was designed to be flown by Newtypes, as Anaheim Electronics was planning to hand it over to the Neo Zeon remnant group, the the Sleeves, in a backroom deal, in the form of a transfer disguised as a robbery.Two lines of mobile suits were later developed using the Sinanju Stein as a base. These were the RX-0 Unicorn Gundam and the MSN-06S Sinanju. The Unicorn Gundam was thought to be developed by based on the data of the Sinanju Stein's test. The Sinanju was refurbished using one of two units stolen the Sleeves, and had its response levels tuned down as its controls were too sensitive. Due to how famous the Sinanju later became, the Sinanju Stein was also referred to as "The stone from which Full Frontal's Sinanju was hewn". The other stolen unit was also embellished with the engravings of the Sleeves and deployed in battle over RX-0 Unicorn Gundam 03 Phenex. What is Ver.Ka In 2002, Bandai started releasing a Master Grade line under the label of “Ver. Ka” (Version Katoki), in honor with veteran mecha designer Hajime Katori. Some of the Ver. Ka kits were produced as a result of annual fan votes.

The GN-001 Gundam Exia (aka Exia, Gundam Seven Swords) is a mobile suit featured in season one of Mobile Suit Gundam 00 and is piloted by Setsuna F. Seiei. Specializing in close combat and armed mainly with melee weapons, the Gundam Exia is one of four Gundams deployed in AD 2307 by the paramilitary organization, Celestial Being, to eliminate world conflicts through armed interventions. To fight against the world with their small numbers and win, these Gundams have overwhelming power and equipped with advanced technology a century ahead of its time. Notably, the semi-perpetual GN Drive mounted in the center of the Gundams provide almost limitless energy and generates special, multifunctional GN Particles. The GN Particles grant outstanding mobility, including independent flight capabilities, and are also utilized for beam weaponry, attitude control, and stealth purposes as the discharged particles can cause electromagnetic interference, leaving conventional communication and radar devices useless. The Gundams also share common aspects with conventional mobile suits, such as the use of E-Carbon for its armor material. However, the Gundams' E-Carbon has higher defensive power due to the use of advanced materials.An example of Exia's overwhelming power is that its output was estimated to be about six times that of the SVMS-01 Union Flag, one of the newest conventional mobile suits at the time. The technical hurdles that had to be overcome to create the powerful Gundams and their GN Drives were high, making their production extremely difficult and caused the Gundams' development to occur in phases. The first generation machine, the GN-000 0 Gundam, established the basic system of a mobile suit powered by a GN Drive, and armed with a beam gun and beam saber. Subsequently, four second generation machines were developed with individual capabilities required for armed intervention, and their data served as a basis for the third generation machines, which included Exia and the other three Gundams deployed in the armed interventions. Specifically, Exia was developed from the GNY-001 Gundam Astraea, a general-purpose mobile suit with human-like movability that was used for testing various weapons, and the two machines have a number of similarities in terms of appearance.The Astraea's movability aspect is particularly appropriate for the Exia, which requires the same range of articulations as the human body due to its close combat specialization. Thus, while the Exia is armed mainly with melee weapons, its basic performance remains that of a general-purpose mobile suit. In fact, Exia is the only Gundam deployed for the armed intervention that has a body structure capable of range of articulations like the human body's, and the omission of such a structure in the other three Gundams is simply because they do not require it as their specialization is in other areas. To achieve its wide range of articulations, Exia has the most complex basic frame out of the four Gundams, its armor is also more minutely segmentalized as well. This armor design however causes some internal structures and the joints to be unprotected during certain poses, lowering Exia's defensive capability. On the other hand, this design does provides better mobility, giving Exia the best projectile evasion capability among the four Gundams.The Exia also has finer attitude control capabilities than the other Gundams, which is beneficial for close combat, and this is related to its GN Cables. The GN Cables, also known as “GN Power Lines”, are the light purple-colored cables running through various parts of the Exia's body and also one of its eye-catching visual features. While these cables are also found on other Gundams, the ones extending from the shoulders to the upper arms are unique to Exia. The cables facilitate the supply of tremendous amount of GN Particles, and thus energy, to each part of the Gundam instantaneously. They are also used for attitude control due to the GN Particles' mass reduction effect, and so, the Exia which has more cables on its exterior than the other Gundams is able to achieve finer control. In terms of defense however, such placements are dangerous, and later in GN-001REII Gundam Exia Repair II, the cables become mostly stowed in the armor.The GN Particles' mass reduction effect also lightens the Gundam, and can be used to alter the mass ratio of various body parts. Due to this latter ability, it is possible to freely control the machine's inertia and turning capabilities when in the air, and for Active Mass Balance Auto-Control (AMBAC) when in space. This also eliminates the need for the legs to "walk” when moving. As for the control of GN Particles, it is largely carried out by the two clavicle antennas on the Gundam's torso. A minor role is played by the third generation Gundams' head antenna, which is experimentally equipped with particle control functions. The head antenna also has communications and radar search functions, as well as the black box for quantum communication linkage with Veda (the Celestial Being's quantum computing system). The rest of the Gundams' humanoid head unit also contain systems responsible for controlling the entire body, much like a human's head. On a side note, the Exia's head is designed to look like the helmet of the pilot suit worn by the Gundam Meisters in AD 2307-2308 to express the belief of “Meister = Gundam”.While the GN Drive can produce GN Particles endlessly, even when the Gundams are inactive, there is a limit to the amount that could be instantaneously produced. Thus, continuous or heavy usage of beam weapons and other GN Particles consuming systems might cause the Gundams to run out of particles. To avoid this, the Gundams have GN Condensers in various body parts to store excess GN Particles. For maintenance purposes, the condensers can display the particles' compression rate and the amount stored. During mission, this display function is used for transmitting coded messages to allied units. On the matter of GN Drives, Celestial Being only created five units as that was deemed to be the minimum needed for armed interventions. The low number is not only due to difficulties in manufacturing the GN Drive, which requires Jupiter's high gravity environment, but also because having more GN Drives would increase the risk of them falling into the enemy's hands.The Gundam Exia is nicknamed “Gundam Seven Swords” as its development code was “Seven Swords”, and as indicated by this name, it is equipped with a total of seven blades to meet the needs of the moment during combat. Of these seven, the GN Sword, GN Long Blade, GN Short Blade are physical blades, while the rest are beam-based and consisted of two GN Beam Sabers and two GN Beam Daggers. The GN Sword serves as the primary weapon and due to its low energy consumption, the Exia has an advantage in prolonged combat, which mainly occurs when fighting ace pilots or when subjected to traps such as the three major bloc's joint military exercise. The three physical blades also serve as countermeasures against GN Field, a protective barrier made of GN Particles. In other words, Exia is also intended to fight against Gundam/GN Drive-equipped machine that is piloted by a betrayer or captured by the enemy and used against Celestial Being. Early on, an alternate configuration of the GN-005 Gundam Virtue also had an anti-betrayer role, but its design was dropped and this increased the responsibilities placed on Exia and its Gundam Meister.Other armaments include a GN Shield for defense that also provides protection to the internal structures and joints that might be exposed during movements. The GN Shield is usually in a compact size to maintain Exia's range of articulations, but can expand to increase the defensive area when needed. Similarly, the GN Sword, can fold its blade and has a Rifle Mode for ranged combat. The last of Exia's armament is another ranged weapon in the form of a pair of low-power GN Vulcans mounted in the forearms. During battles, the Exia gloriously sliced through its opponents in close combat, leaving a powerful impression on those who witnessed it and contributing greatly to the instillment of a "fear of Gundams" in the world. This was already anticipated by Celestial Being, and it is because of this that the organization's tactical forecaster, Sumeragi Lee Noriega, selected the Exia to intervene in the AEU-09 AEU Enact's presentation ceremony, which became the unveiling of the paramilitary organization.The Gundam Exia has an "Over Boost Mode" that temporarily boosts its GN Drive's performance and thus increase the mobile suit's capabilities. During an emergency, the Exia can activate a special "Trans-Am System" that enhances its thrust and defensive capabilities, as well as increase its output to three times that of its normal specifications for a limited period of time. This system also causes the Gundam to glow red, but it is a double-edged sword as Exia's performance will drop dramatically once it ends. A number of additional optional equipment was also developed for Exia, such as the high mobility Avalanche Unit and the GNR-001E GN Arms Type-E support machine. When equipped with the Avalanche Unit, the Exia becomes the GN-001/hs-A01 Gundam Avalanche Exia and can speed past specialized high-speed mobile suits, which it normally cannot do despite having remarkable mobility. When docked with the GN Arms Type-E, the Exia becomes the GN-001+GNR-001E GN Armor Type-E, obtaining better mobility, offensive and defensive capabilities.