Master Grade 1/100 Gundam

The MG 1/100 Gundam AGE II Magnum is a Master Grade model kit from the "Gundam Build Divers" series. Released in 2019, this kit features: Articulated joints for dynamic posing capabilities. Weapons including: 2 Beam Sabers 2 Hyper DODS Rifles 2 Shiguru Shields Transformation capability between Mobile Suit (MS) mode and Phoenix mode. New shoulder mold for increased strength and hip locking mechanisms for enhanced stability in both modes. Snap-fit assembly with color-coded plastic parts, minimizing the need for painting. Once assembled, the model stands approximately 7 inches (17.78 cm) tall, making it a notable addition to any Gundam collection.

The MG 1/100 RX-0 Unicorn Gundam HD Color + MS Cage is a Master Grade model kit from the "Mobile Suit Gundam Unicorn" series. This special edition features: High-definition color molding for enhanced visual appeal. Fully transformable design between Unicorn Mode and Destroy Mode. MS Cage for display and storage of extra parts. Weapons including a beam magnum, hyper bazooka, and shield. Detailed markings and decals for added authenticity. Once assembled, the model stands approximately 18 cm tall, making it a standout piece for any Gundam enthusiast.

The MG 1/100 RX-93-ν2 Hi-ν Gundam is a Master Grade model kit representing Amuro Ray's powerful mobile suit from "Mobile Suit Gundam: Char's Counterattack – Beltorchika's Children." This kit features: Articulated joints for superior posing options, allowing dynamic recreation of iconic stances. Weapons including a beam rifle, hyper bazooka, shield, and six fin funnels for enhanced display and playability. Snap-fit assembly with molded color parts for a polished finish without the need for painting. Clear parts and detailed panel lining for an authentic and premium look. Standing approximately 22 cm tall when completed, this kit combines intricate details and exceptional engineering, making it a must-have for Gundam fans and builders alike.

The MGSD Wing Gundam Zero EW from Mobile Suit Gundam Wing: Endless Waltz is a high-end Super Deformed (SD) model kit from Bandai's MGSD series. This model integrates Master Grade (MG) technology into SD Gundams, offering enhanced articulation and intricate details. Key Features: Articulated Wings: The main wings feature a five-layer structure with individually moving parts, allowing for expansive poses. They can unfold to reveal internal silver components and clear parts with a reflection-cut finish. The secondary wings have unfolding mechanisms where the lower feathers deploy when the upper feathers are raised. Transforming Mechanism: This is the first MGSD kit to incorporate a transforming mechanism, enabling two Neo Bird forms: Outer Atmospheric Mode: Main wings folded. Atmospheric Mode: Main wings deployed. Dynamic Articulation: The model boasts extensive articulation, including movable axes in the head and neck, shoulder armor that moves in conjunction with the upper sections, and a torso with multiple points of articulation for a wide range of poses. The front skirt armor expands forward to assist thigh movement. Detailed Internal Frame: The internal frame is crafted with multiple gimmicks and utilizes Realistic Metallic Gloss Injection, providing MG-class details in SD scale. Clear parts are layered over detailed internal components to create realistic multi-layered structures. Weapons and Accessories: Twin Buster Rifle: Features a barrel-extension gimmick and a joint deployment mechanism that connects to the arm for enhanced holding power. Shield: Secured at three points to prevent dislodging. Effect Parts: Includes two effect parts for dynamic display options. Marking Stickers: For added detail and customization. Release Information: Released in 2024 as part of Bandai's MGSD line, this model kit showcases the Wing Gundam Zero EW in a stylized SD form while preserving the level of detail expected from Master Grade models. The MGSD Wing Gundam Zero EW is ideal for collectors and Gunpla enthusiasts who want a highly detailed, articulated model in a compact and stylized form. The transforming wings and the intricate internal frame set this kit apart as a must-have for fans of Gundam Wing.

The MG 1/100 XM-X1 Crossbone Gundam X-1 Ver. Ka is a Master Grade model kit that brings the iconic mobile suit from the Mobile Suit Crossbone Gundam manga series to life. Designed by renowned mecha designer Hajime Katoki, this kit offers an intricate building experience, capturing the unique pirate-themed aesthetics and advanced weaponry of the Crossbone Gundam X-1. Key Features: Scale and Materials: 1/100 scale model kit crafted from high-quality injection-molded plastic, ensuring durability and precision in assembly. Articulation: Features multiple points of articulation, allowing for dynamic poses that showcase the Gundam's agility and combat readiness. Weaponry and Accessories: Equipped with: Beam Sabers Scissor Anchors with wires Heat Daggers Beam Shield/Brand Marker Anti-Beam Coating (ABC) Mantle Buster Gun Beam Zanber Zanbuster (combination of Buster Gun and Beam Zanber) Design Details: Includes a Core Fighter and a 1/100 scale pilot figure of Tobia Arronax. The kit also provides parts to build the Crossbone Gundam X-1 Kai (Custom) variant. Release Information: Released in September 2006 as part of Bandai's Master Grade series, this kit is a fan-favorite, offering both builders and collectors a detailed rendition of the Crossbone Gundam X-1. The MG 1/100 XM-X1 Crossbone Gundam X-1 Ver. Ka is an excellent addition for fans of the Gundam franchise and model builders seeking a unique and detailed representation of this distinctive mobile suit.

The RX-78GP01 Gundam "Zephyranthes" (aka Zephyranthes, GP01, Unit 1) is a prototype general-purpose mobile suit introduced in the Mobile Suit Gundam 0083: Stardust Memory OVA. It was piloted by Kou Uraki.  Developed as part of the Gundam Development Project, the GP01 was a ground-use general purpose mobile suit intended to be an improvement of the RX-78-2 Gundam, which achieved exceptional battle results during the One Year War. Being an experimental unit, it was equipped with an increased number of sensors, some of which were exposed due to being temporary. Compared to the RX-78, its sensors and balancer were upgraded or redesigned. Overall, the GP01 was designed to allow movement closer to that of a human (a design concept that would eventually evolve into the Movable Frame). In order to ensure the survival of the pilot and the combat data, the GP01 retained the Core Block System. However, to address the RX-78's structural weakness in the stomach, the GP01 adopted an experimental "horizontal in the body" structure instead of the previously used "vertical in the body" structure. The GP01's main generator, main thrusters, and operation and control instruments were all integrated into its FF-XII Core Fighter II. In addition, when docked, the Core Fighter's beam guns serve as the GP01's beam sabers. Thanks to this design, the Core Fighter's propellant, thrusters, and weapons were no longer dead weight when docked. By switching the Core Fighter, the GP01 could operate both on Earth and in space, though additional readjustment and maintenance was still needed. Thanks to this design, despite being a general-purpose mobile suit, its performance rivaled or exceeded dedicated ground-use and space-use mobile suits in both environments.

The MG 1/100 V2 Gundam Ver.Ka is a Master Grade model kit that brings the LM314V21 Victory Two Gundam from the Mobile Suit Victory Gundam series to life, designed by the renowned mecha designer Hajime Katoki. This kit offers an intricate building experience, faithfully replicating the mobile suit's complex transformation mechanisms and detailed design. Key Features: Scale and Materials: 1/100 scale model kit crafted from high-quality injection-molded plastic, ensuring durability and precision in assembly. Transformation Mechanism: Accurately reproduces the V2 Gundam's transformation into its various configurations, including the Core Fighter, Top Fighter, and Bottom Fighter, with meticulous attention to detail. Articulation: Features numerous sliding hatches and movable panels, providing extensive articulation for dynamic posing and display options. Weaponry and Accessories: Equipped with: Beam Rifle Beam Shield with clear parts Beam Sabers Hand parts with swappable fingers for added stability and expressive detail Design Details: Incorporates Katoki's signature design elements, enhancing both aesthetic appeal and functionality. The kit also includes two pilot figures, allowing for the choice between Uso Ewin or Marbet Fingerhat in the cockpit, and a standing figure of Shakti Kareen. Release Information: Released in December 2015 as part of Bandai's Master Grade series, this kit was highly anticipated, ranking #1 in a 2010 poll for the most requested Master Grade model. It commemorates the 35th anniversary of GunPla with its sophisticated engineering and design. The MG 1/100 V2 Gundam Ver.Ka is an exceptional addition for Gundam enthusiasts and model builders, offering a challenging and rewarding build that captures the essence of the Victory Two Gundam.

The MG 1/100 Musha Gundam MK-II is a stunning Master Grade model kit that reimagines the legendary Gundam MK-II with intricate samurai-inspired details. Designed for enthusiasts of both Gundam and traditional Japanese warrior aesthetics, this kit delivers an exceptional blend of style, precision, and craftsmanship. Key Features: Scale and Material: 1/100 scale model kit made from high-quality polystyrene, ABS plastic, and PVC for durability and precision. Samurai-Inspired Design: Features ornate gold-plated armor, kabuto-style headgear, and a bold black-and-gold color scheme with crimson accents. Dynamic Weaponry: Equipped with dual katanas, a naginata, and a musket-style rifle, providing versatile display options. Articulation and Poseability: Built on a robust Master Grade frame, offering exceptional articulation for dynamic action poses. Customization: Includes detailed stickers and decals for added personalization. Release Information: This model kit was released in 2009 as part of Bandai’s celebrated Master Grade line. It combines elements of the traditional Musha Gundam with enhanced details, making it a standout piece for collectors. The MG Musha Gundam MK-II is an ideal choice for modelers looking for a unique and highly detailed build. With its rich samurai heritage and Gundam legacy, it is both a rewarding project and an impressive display centerpiece.

The MG 1/100 Shin Musha Gundam Sengoku no Jin is a premium Master Grade model kit that seamlessly merges Gundam’s mecha design with traditional samurai aesthetics. This special edition captures the grandeur of Japan’s Sengoku era, making it a must-have for collectors and enthusiasts alike. Key Features: Scale and Material: 1/100 scale model kit made from high-quality polystyrene and ABS plastic for intricate detailing and durability. Authentic Samurai Design: Features a kabuto-inspired headpiece, ornate gold-plated armor, and a striking crimson and gold color scheme. Comprehensive Weaponry: Comes equipped with the Nichirinmaru katana, Denkoumaru naginata, Sankoumaru jumonji yari, and a Tanegashima rifle with silver mekki plating for added realism. Exclusive Display Accessories: Includes a folding screen illustrated by Naochika Morishita, dedicated stands for weapons, and a custom base for a display reminiscent of traditional Gogatsu Ningyo setups. Enhanced Articulation: Utilizes the inner frame from the Master Grade RX-78-2 Gundam Ver. One Year War 0079 for dynamic and expressive posing options. Release Information: This model kit was released in 2009 as part of Bandai’s Master Grade series, commemorating Gundam’s iconic legacy with a samurai twist. It remains a favorite among fans for its unique design and premium features. The MG 1/100 Shin Musha Gundam Sengoku no Jin delivers a rewarding build experience and serves as a breathtaking display piece, celebrating both Gundam lore and samurai heritage.

The MS-09 Dom (aka MS-09B Dom) is a mass-production ground combat mobile suit introduced in Mobile Suit Gundam. Its most well known pilots are the Black Tri-Stars.

The MSN-06S-2 Sinanju Stein is a mobile suit from Mobile Suit Gundam Narrative and is piloted by Zoltan Akkanen. The MSN-06S Sinanju Stein was developed to test the durability and follow-up capabilities of the Psycho-Frame. Two units of the Mobile Suit, referred to using the development code "Stein 01", were later stolen by the Neo Zeon remnants, the Sleeves. One unit was remodeled as the MSN-06S Sinanju and used as the flagship MS of the organization. In UC 0097, the other unit was seen in the fight over the RX-0 Unicorn Gundam 03 Phenex and was embellished with the engravings that became root for the name of The Sleeves.

The XXXG-01W Wing Gundam (aka Zero-One or Gundam 01) is the titular mobile suit of the anime Mobile Suit Gundam Wing. It was primarily piloted by Heero Yuy. Out of the five original Gundams created for Operation Meteor, Wing Gundam is the most well-balanced in terms of abilities and bears the closest resemblance to their common ancestor: the XXXG-00W0 Wing Gundam Zero. Like Wing Zero, the Wing Gundam can transform into an alternate flight form known as "Bird Mode" and has a powerful Buster Rifle as part of its armaments. However, the "ZERO System" interface (which had technical problems) and other parts considered to be excessive were not included, and the skills of the pilot are needed to make up for the shortfall. Its cockpit is a spherical capsule surrounded by a linear frame, and it swivels in the same direction as the mobile suit's head. Unlike the standard OZ cockpit, it is a floating cockpit with a shock mitigation function.The major contributor to Wing's mobility is the pair of wing units on its backpack. These units not only generate lift, but can also change the aerodynamic characteristics of the mobile suit through the movements of their individual panels, supporting a range of speeds from stall to hypersonic. Even in outer space, these wing units exhibit high attitude control capability using both AMBAC and built-in vernier thrusters. By transforming into Bird Mode, Wing's mobility and movement range are increased further, allowing it to conduct operations that other Gundams could not. The leg thrusters on the back of the knees serve as the main verniers in Bird Mode, and are also used for dashing on the ground in MS mode.

The RGM-79 GM (aka GM, pronounced Jim) was the first mass-produced mobile suit of the Earth Federation. It first appears in Mobile Suit Gundam. The RGM-79 GM is a mass-produced mobile suit based on the RX-78-2 Gundam. Its basic frame is easily adaptable to modifications into mission specific GM models, and has a fairly high level of mobility, for the time, both on Earth and in space. It has a maximum acceleration of 0.94 Gs in space, which is better than the Gundam's and roughly twice of the Zaku's. On Earth's surface, the GM is also faster than the Zaku II. The armor of the GM uses Titanium Alloy, a sturdy metal that could be refined more quickly and easily than the Gundam's Luna Titanium Alloy. Although titanium alloy is less durable than Luna Titanium, it is also slightly lighter which reduces the GM's overall mass compared to the Gundam's and is still superior to the Zaku II's super-high tensile steel armor. The GM was primarily armed with a beam spray gun, a less powerful version of the Gundam's beam rifle but could still destroy MS in one shot. Early in production, the beam spray gun had yet to be mass-produced so most GMs were equipped with various machine guns. These machine guns continued to be used by the GMs later, and the machine could also use the Gundam's beam rifle when required. It could also use a mass production version of the Gundam's Hyper Bazooka for heavier firepower. For close combat, the GM has a beam saber, and a shield similar to the one used by the Gundam. Commander units sometimes featured a second beam saber. Lastly, the GM has a pair of head-mounted 60mm vulcan guns for intercepting missiles, small vehicles or to stop enemy MS from closing in. From the GM started the RGM series that remained the mainstay of the Federation's mass production mobile suits until the end of the Federation itself.

The Master Grade (MG) ZGMF-X42S Destiny Gundam is a 1/100 scale kit released in 2007.

The RX-9/C Narrative Gundam C-Packs is a mobile suit introduced in Mobile Suit Gundam Narrative and is piloted by Jona Basta. The C-Packs was the third optional equipment for the RX-9 Narrative Gundam and is embellished with Psycho-Frame as additional armor. It is said that no such equipment plan originally existed for the MS, resulting in minimal conversions being hastily applied to the MS. Despite its unusual origin, the MS did achieve its concept to have an increased amount of Psycho-Frame, proving the high extensibility of the Narrative Gundam. This configuration of the MS is also called the "Psycho Package" and the Psycho-Frame used to create it was independently collected by Luio & Co.  

The GAT-X105E Strike E was a Mobile Suit introduced in the manga Mobile Suit Gundam SEED C.E. 73 Δ Astray.

Bandai China 2024 Limited Edition MG 1/100 Cross Contrast Colors Gundam Barbatos Bandai China Estimated Release Date: December 2024 Estimated Delivery: 1st Quarter 2025 Grade: MG Scale: 1/100 Please read our Preorder FAQ carefully before placing the order.  

Bandai China 2024 Limited Edition MG 1/100 Cross Contrast Colors Gundam Astray Red Frame Kai Bandai China Estimated Release Date: December 2024 Estimated Delivery: 1st Quarter 2025 Grade: MG Scale: 1/100 Please read our Preorder FAQ carefully before placing the order.  

The RX-78-2 Gundam is the titular mobile suit of Mobile Suit Gundam television series. Part of the RX-78 Gundam series, it was built in secret on Side 7. The Gundam would turn the tide of war in favor of the Earth Federation during the One Year War against the Principality of Zeon. It was primarily piloted by Amuro Ray. The Gundam was incredibly advanced for its time. Built from lightweight Luna Titanium Alloy, its frame was both lighter than that of Zeon's mass-produced mobile suits and much sturdier, able to shrug off a MS-06 Zaku II's machine gun fire with little to no damage. Its offensive power was above and beyond that of the Zakus. The Gundam would engage in most battles with its beam rifle, making it the first mobile suit to have firepower equivalent to a battleship's beam cannons. In addition, it made use of two beam sabers, blades of extremely hot plasma which could cut through any metal with ease. Those beam sabers could be extended into a spear-like beam javelin, which could be used to stab into an enemy from a longer distance.The Gundam also used more conventional weaponry; it could launch rockets with a "Hyper Bazooka", the Federation's answer to the bazookas used by Zeon's Zakus; in addition, its head was outfitted with a pair of small vulcan guns, as a way of attacking light-armored aircraft and vehicles without wasting ammo or energy from its more powerful armaments. It also made use of a very unconventional close-range weapon known as the "Gundam Hammer" - a large weapon similar to a flail which could be swung at enemies to deal crushing damage. The Gundam Hammer was eventually upgraded for use in space and outfitted with a number of verniers on the ball, and renamed to be the "Hyper Hammer". Lastly, it wielded a shield which would offer it a defense against enemy attacks that not even its Luna Titanium body could withstand without damage. Gundam pilot, Amuro Ray, would make use of the shield as a decoy in many battles, taking advantage of its size to fool the enemy into thinking he was charging at them, then attacking the enemy through the shield.In terms of technology, the Gundam was equipped with a sophisticated Learning Computer which would collect pilot and enemy data during skirmishes and allow the Gundam to operate more effectively. The data from the computer was used by the Federation to improve the controls of the Gundam's mass-produced form, the RGM-79 GM. In addition, it was upgraded by Federation technician Mosque Han shortly before the Battle of A Baoa Qu to improve its reaction times, the joints of the Gundam were given a Magnet Coating, based on the experimental procedure performed on the RX-78-3 "G-3" Gundam and later used on Amuro's intended successor unit, the RX-78NT-1 Gundam "Alex".The Gundam makes use of the Core Block System implemented in the other V Project units. The torso of the Gundam is mostly hollow so that a FF-X7 Core Fighter can dock with it. This allows the pilot to jettison the legs and torso of the Gundam should the machine be too heavily damaged and gives the pilot a chance to escape from battle. Later, during Operation Odessa, the Gundam is given a support unit known as the G-Fighter. The two G-Fighters were designed to take advantage of the Gundam's modular system and diversify the Gundam's role in active combat. These modes ranged from the assault bomber G-Armor to the close combat support tank G-Bull. Officially, it is called a prototype, but it is also said to be more of a custom-made machine that is finished with high quality materials and the best technology.

The ZGMF-X42S Destiny Gundam is the titular mobile suit of Mobile Suit Gundam SEED Destiny and was piloted by Shinn Asuka. A straight-built Gunpla version is piloted by Shimon Izuna in Gundam Build Fighters Try. The ZGMF-X42S Destiny Gundam is a high performance general-purpose MS commissioned by ZAFT Chairman Gilbert Durandal, who ordered it to be incorporated with the most advanced technology of the time, including technologies banned by the Junius Treaty. Based on the ZGMF-X56S Impulse Gundam and Shinn Asuka's combat data, it is designed to handle any combat situations with a single set of varied armament, a concept first tested on the ZGMF-X56S/θ Destiny Impulse. For close combat, it has two beam boomerangs that double as beam sabers, a pair of palm beam cannons, and a large beam sword. For ranged battle, it is equipped with a long-range beam cannon and a beam rifle. For defense, it mounts a small physical shield as well as two beam shield generators. Lastly, the suit has a standard set of CIWS.For the Destiny Gundam to use its variety of weapons effectively and quickly, it needs to have a wider range of body movements as well as be more flexible. To achieve a wider range of body movements, the suit's basic structural components are split into smaller, movable pieces, while its armor is divided into smaller pieces in a manner similar to that of the ZGMF-X20A Strike Freedom Gundam's. The exposed gaps in the armor due to smaller armor pieces are remedied by mapping out the ranges of motion of the frame using Shinn's combat performance to determine the most efficient way to separate the armor parts. This ensures the wider range of body movements do not compromise defensive power. To be more flexible, the Destiny's joints are constructed of the same materials found in Phase Shift armor. This allows the joints to possess near-human flexibility when phase-shifted and a faint metallic glow is produced when discharging excess residual energy within the body through the joints. Through these measures, the suit met its requirements, however, various problems remain to be solved, including maintenance problems and production issues.Other special aspects are the Destiny's use of the new Voiture Lumiere propulsion system and the use of Mirage Colloid to create illusionary copies of itself. Destiny's Voiture Lumiere propulsion system is installed in the wings, which are improved version of the ZGMF-X10A Freedom Gundam's wings, and will produce a special light effect known as Wings of Light during high speed movements. The Voiture Lumiere propulsion system is frequently used alongside the Mirage Colloid to confuse the enemy as the real Destiny sets up for a high-speed attack. Like the ZGMF-X666S Legend Gundam, the Destiny Gundam is powered by the Hyper-Deuterion Engine and armored with Variable Phase Shift armor. Although classified as a "Second Stage Series" mobile suit, as indicated by the "S" in its model code, the Destiny should be a "Third Stage Series" instead based on its performance. This is done to hide the fact that it is a nuclear-powered suit and should have an "A" instead.