Most Popular

The XXXG-01D2 Gundam Deathscythe Hell (aka Deathscythe Hell, or Gundam Zero-Two) is the upgraded version of XXXG-01D Gundam Deathscythe in Mobile Suit Gundam Wing. It is piloted by Duo Maxwell. An updated version of the XXXG-01D Gundam Deathscythe that was destroyed by OZ, the Deathscythe Hell is better adapted for space combat. Like its predecessor, the Deathscythe Hell specializes in stealth and close combat. The new active cloak mounted on the shoulders improve the suit's defense when closed, and can withstand multiple beam cannon shots from OZ's OZ-02MD Virgo. Furthermore, it also allows the suit to become invisible. When opened, the active cloak enhances the Gundam's mobility. One of Duo Maxwell's favorite strategies is to use the Gundam's enhanced hyper jammers and its invisibility to sneak close to enemy units and catch them unawares. This tactic is usually good for taking out at least one or two enemy units, after which Duo will uncloak the Gundam.Deathscythe Hell's primary weapon is a Twin Beam Scythe, an upgraded version of its predecessor's Beam Scythe, and it is equipped with a second beam scythe blade and a small rocket engine on the end, giving it a greater reach and power. The Deathscythe Hell's secondary weapon is a Buster Shield on the left forearm which can be deployed as a projectile weapon. Like the original Deathscythe's, this buster shield can also emit a beam blade. Lastly, the Deathscythe Hell retained the Deathscythe's head-mounted vulcan guns, but the clavicle-mounted machine guns were removed.

The RX-77-2 Guncannon was a mobile suit used by the Earth Federation Forces introduced in the TV anime Mobile Suit Gundam. A middle-range support mobile suit developed simultaneously with the RX-78 Gundam and the RX-75 Guntank as part of Operation V, the Guncannon adopted the same Core Block System as the other two units. Due to its role as an artillery support unit, the Guncannon's design prioritized durability over mobility, and it was not equipped with any melee weapons. However, its armor was particularly heavy, capable of surviving a direct hit from an MS-09R Rick Dom's giant bazooka.Similar to the Guntank, the Guncannon's main weapons were a pair of shell-firing cannons, chosen for their reliability over beam weapons. These cannons could be optionally swapped out for a pair of spray missile launchers. Unlike the Guntank, however, the Guncannon's generator output allowed it to equip a beam rifle. It was also equipped with a pair of head-mounted Vulcan guns and hand grenades for attacking enemy strongholds.Though its head design appeared to be simpler than the Gundam's head, the Guncannon's sensor system was in fact more complicated than the Gundam's due to its need to engage in artillery warfare. This "twin eyes with goggles" sensor design were later inherited by the RGM-79 GM. While the Guncannon's mobility was adversely affected by its weight, it was still comparable to that of the Zeon's MS-06 Zaku II. Furthermore, the backpack thrusters have sufficient thrust to enable jumping maneuvers under gravity for a short period of time.

Entry Grade 1/144 RX093 νGUNDAM The RX-93 ν Gundam (aka Nu Gundam, Nu) is a mobile suit that appears in Mobile Suit Gundam: Char's Counterattack. It was designed and piloted by Amuro Ray.

The MSN-06S-2 Sinanju Stein is a mobile suit from Mobile Suit Gundam Narrative and is piloted by Zoltan Akkanen. The MSN-06S Sinanju Stein was developed to test the durability and follow-up capabilities of the Psycho-Frame. Two units of the Mobile Suit, referred to using the development code "Stein 01", were later stolen by The Sleeves, remnants of Neo Zeon. One unit was remodeled as the MSN-06S Sinanju and used as the flagship MS of the organization. In UC 0097, the other unit was seen in the fight over the RX-0 Unicorn Gundam 03 Phenex and was embellished with the engravings that became root for the name of The Sleeves.

The ZGMF-1000/A1 Gunner ZAKU Warrior is a Mobile Suit introduced in the anime Mobile Suit Gundam SEED Destiny. A variant of the ZGMF-1000 ZAKU Warrior equipped with the Wizard System's EX-A1 Gunner Wizard on its back. The Gunner ZAKU Warrior is specialized for artillery strikes, and its main weapon is the M1500 "Orthros" high-energy long-range beam cannon mounted on the Gunner Wizard. This beam cannon is the strongest ranged weapon available to the ZAKU Warrior and grants it impressive firepower over long ranges, capable of destroying any mobile suits or mobile armors within its line of fire.

The MSM-04 Acguy (アッガイ Aggai?) is an amphibious mobile suit introduced in the anime Mobile Suit Gundam. Following the Zimmad Company's MSM-03 Gogg, the Zeonic Company produced their own amphibious mobile suit for the Principality of Zeon, the MSM-04 Acguy. The Acguy used many of the same parts and components as the MS-06F Zaku II, including two of the Minovsky Ultracompact Fusion Reactors used by the latter. Even with the twin reactors, the Acguy left only a trace heat signature, making it effective for stealth and infiltration operations. It is also one of the tallest amphibious mobile suit used by the Zeon during the war. About 60 units were produced according to some sources.The Acguy's weapons consisted of four 105mm vulcan guns mounted in its unusually large head. In its right forearm was a mega particle gun, but in some units, this was replaced by a vulcan gun. The right forearm also had extendable claws known as Iron Nail (along with an extendable arm to increase striking distance) for striking the Earth Federation's mobile suits and property. In the left forearm was a six-tube missile launcher. Some models also had missile launchers in the right forearm, replacing the mega particle cannon and claws.

The EMS-10 Zudah was a prototype Mobile Suit developed by Zimmad for the Principality of Zeon before the One Year War. It appears in the OVA series Mobile Suit Gundam MS IGLOO. During the Principality of Zeon's race to develop a superior fighting machine, four prototype mobile suits were developed from different engineering companies: one of these was Zimmad's EMS-04 Zudah. It had a good power plant with unprecedented thrust and acceleration. It also adopted a prototype engine known as the Jupiter engine which was based on Zimmad's prototype Mercury engine. However, the suit did have limits: if the engines were overexerted, the suit would overload and break apart. Zeonic Company used this information to outdo the Zudah with their well-known YMS-05 Zaku and successfully marketed the Zaku series.This, however, was not the end of the story. The Zudah was resurrected under the model number EMS-10, with some minor improvements and cosmetic differences. Its left shoulder was refitted with a movable shield that could be swung to the back, and it was equipped with spikes for melee combat. The EMS-10 was said to be fitted with the improved "Saturn" engine, previously used on the MS-09R Rick Dom (though whether this is true or merely propaganda is unknown). A number of new weapons were also added, including all of the existing Zaku weapons, as well as a new 135mm anti-ship rifle. However, despite these improvements, the suit was still prone to breaking apart from overexertion.

The GAT-X207 Blitz Gundam is a prototype stealth Mobile Suit introduced in the anime Mobile Suit Gundam SEED. It is piloted by Nicol Amalfi. The GAT-X207 Blitz Gundam is developed for the purpose of conducting surprise attacks deep behind enemy lines. It is the only unit among the five prototypes created under the Alliance's G Project to use the X200 series frame that is designed to support special systems. In this case, the Mirage Colloid Stealth System that renders Blitz invisible to both sensors and the naked eye. The suit is painted mainly black to enhance the effectiveness of the stealth system and is fitted with other systems to ensure the silent operation of internal mechanisms and systems, as well as to control the heat dissipation while cloaked. Like the other four units, Blitz is also equipped with Phase Shift armor system, but unlike them, it does not have any built-in weaponry like the CIWS. Its armament are all arm-mounted and consists of a grappling claw and an offensive shield system, which mounts both melee and range, beam as well as non-beam weapons.

The MSN-00100 (MSN-100, MSN-001) Hyaku Shiki (百式, "Type 100") is a prototype Mobile Suit featured in Mobile Suit Zeta Gundam and Mobile Suit Gundam ZZ. It was primarily piloted by Quattro Bajeena during the Gryps Conflict and later by Beecha Oleg in the First Neo Zeon War. The Hyaku Shiki is a mobile suit built by Anaheim Electronics as part of the "Zeta Project". It was originally designed as the prototype transformable mobile suit, MSN-001 Delta Gundam which incorporated Anaheim Electronics' own "movable frame" technology and backpack-mounted wing binders for additional mobility. However, defects in the frame design led to problems in its transformation and the machine's development was soon abandoned.When the AEUG captured the Titans' RX-178 Gundam Mk-II, the movable frame technology of this newly acquired mobile suit assisted greatly in the advancement of the Zeta Project and also led to the redesigning of the Delta Gundam into the high-performance, non-transformable Hyaku Shiki. Hyaku Shiki, which means 'Type 100' in Japanese, is named as such by its lead developer, Professor M.Nagano who hoped to create a mobile suit design that would endure for a hundred years. Because of the reliability of each device and its ease of access to the interior, the Hyaku Shiki has also been given a role as a testbed for the operational testing of various equipment under development.The Hyaku Shiki's gold-colored appearance is due to the application of a beam-resistant coating on its armor, giving it some limited protection against beam attacks. The suit also has a unique sensor called the Image Directive Encode (IDE) system, which emits a red pattern when scanning or during precision aiming. It also retains several design features from the original Delta Gundam design, most notably the legs' front armor and backpack-mounted wing binders. The Delta Gundam's transformation capabilities later resurface in the MSN-001A1 Delta Plus.

The XXXG-0SR Gundam Sandrock (aka Sandrock , Gundam Zero-Four or Sandrock Ver.Ka.) is a mobile suit from the manga Mobile Suit Gundam Wing Endless Waltz: Glory of the Losers and is piloted by Quatre Raberba Winner. The Sandrock was constructed by Instructor H in the L4 colonies under the financial support of the Winner family. Designed for operations on land, especially in a desert environment, it has high combat capabilities and excels in melee combat with its strong armor that is more robust than other Gundams'. In addition, it has advanced communication and information analysis systems as it was designed as a commander unit and tasked to be the core of the command system for the Maganac Corps and the five Gundams. Following its self-destruction and then restoration by the Maganac Corps, the Sandrock was painted in a new bluish-purple color scheme.

The MSN-06S Sinanju Stein (aka Sinanju Stein) is a mobile suit featured in the PlayStation 3 video game Mobile Suit Gundam UC and UC-MSV. Built from the data of both the MSN-04 Sazabi and RX-93 ν Gundam, the Sinanju Stein was developed as part of the Earth Federation Forces reorganization plan known as the "UC Project". Stein means "stone" in German and Norwegian, and the Sinanju Stein's name was a reference to it being "a jewel in the rough". This mobile suit was created by Anaheim Electronics to test the sensitivity and durability of the lightweight and rigid material, the Psycho-Frame, for use in a mobile suit's internal movable frame. The Sinanju Stein was also equipped with a Psycommu system, and the "Intention Automatic System", which functions by using the Psycho-Frame's sensitivity to the pilot's thought-waves to directly affect behavior of the mobile suit.The suit boasts high mobility and features flexible thrusters on its legs and backpack, allowing it to achieve precise movements at high speeds. Due to its murderous acceleration, it was impossible for ordinary pilot to control the Sinanju Stein, and its evaluation tests were conducted on autopilot to test the limits of the Psycho Frame. Therefore, the Sinanju Stein can be said to be a defective machine for humans to pilot, but in reality, it was designed to be flown by Newtypes, as Anaheim Electronics was planning to hand it over to the Neo Zeon remnant group, the the Sleeves, in a backroom deal, in the form of a transfer disguised as a robbery.Two lines of mobile suits were later developed using the Sinanju Stein as a base. These were the RX-0 Unicorn Gundam and the MSN-06S Sinanju. The Unicorn Gundam was thought to be developed by based on the data of the Sinanju Stein's test. The Sinanju was refurbished using one of two units stolen the Sleeves, and had its response levels tuned down as its controls were too sensitive. Due to how famous the Sinanju later became, the Sinanju Stein was also referred to as "The stone from which Full Frontal's Sinanju was hewn". The other stolen unit was also embellished with the engravings of the Sleeves and deployed in battle over RX-0 Unicorn Gundam 03 Phenex. What is Ver.Ka In 2002, Bandai started releasing a Master Grade line under the label of “Ver. Ka” (Version Katoki), in honor with veteran mecha designer Hajime Katori. Some of the Ver. Ka kits were produced as a result of annual fan votes.

The GX-9900 Gundam X (aka Gundam X, GX) is a limited production mobile suit built by the United Nations Earth, and the titular mobile suit of After War Gundam X. Its pilot include Jamil Neate and Garrod Ran. Another slightly different unit appeared in the manga sequel, After War Gundam X: Under the Moonlight, and is piloted by Rick Aller. Built at the height of MS advancement by the UNE, the GX-9900 Gundam X is one of the most advanced MS of its time. It was produced in limited numbers and deployed near the end of the 7th Space War. After the environmental devastation at the end of the war, MS development on Earth became stagnant as humanity recovered; Gundam X and its brethren Gundam series thus remain top-of-the-line after 15 years. Because the UNE no longer existed, there was no regulation over the Gundams and they found new life in the hands of the Vultures.The Gundam X carries a powerful beam cannon known as the Satellite Cannon. The cannon requires power beyond what Gundam X is capable of on its own, so UNE engineers created the D.O.M.E. lunar microwave facility to power it. When the Satellite Cannon is activated, solar power collected at the facility is sent to the Gundam X via a microwave beam and stored in the large reflector panels mounted on the suit's back, enabling the cannon to fire a particle beam powerful enough to destroy a space colony with a single shot. While the Satellite Cannon is indeed powerful, it requires a lengthy time to charge and fire. Enemy units can take this opportunity to attack Gundam X and disrupt its ability to absorb the microwave beam. During the war, several relay satellites were positioned in Earth's orbit that allowed the microwave beam from D.O.M.E. to be transmitted to any location. However, they were all destroyed or damaged in the war, so this resulted in the Satellite Cannon being usable only when there is a clear line-of-sight to the lunar facility.Other weapons on the Gundam X include a large beam sword, four chest mounted vulcan guns, and a shield buster rifle. This allows Gundam X to be adaptable and versatile in most combat situations. Both the large beam sword and the shield buster rifle can utilize the stored microwave energy. The Vultures who have salvaged Gundam X units also gave these machines new weaponry such as shoulder vulcan, torpedo launcher, holster shield, buster sheath rifle, etc. The Gundam X was also designed to exploit the capabilities of its Newtype pilot, but was usable by regular humans as well. A Newtype pilot at the helm can use the Flash System to mentally command remote controlled drone versions of Gundam X, the FX-9900 GX-Bits. These GX-Bits are very similar in design to the Gundam X, and in combat, they are used for coordinated attacks. For regular human pilot, the bits are useless as UNE engineers never created an alternative control system for them to exploit the full potential of Gundam X.The UNE's Gundam series, including Gundam X, has a simple security measure: a G-Controller, a detachable control stick that also serves as the activation key for the mobile suits. However, this is not a strong security measure, as any G-Controller can be used to activate the Gundam. A skilled MS engineer can also hot-wire the system, bypassing the need for a G-Controller to activate the Gundam, and install a new control stick to control the machine.Garrod's unit was defeated by a Newtype pilot utilizing RMSN-008 Bertigo and then upgraded into the GX-9900-DV Gundam X Divider. The New UNE later created the GX-9901-DX Gundam Double X as Gundam X's successor.

This is a rare China limited edition of ZGMF-X10A Freedom Gundam released by Bandai.  ********** 03/16 1st Batch of Shipment Fulfilled ********** All orders placed before 03/10 are in the 1st batch of shipments. These orders are being fulfilled and shipped.    Estimated Delivery: Late Spring / Early Summer 2023 Grade: MG Scale: 1/100 Please read our Preorder FAQ carefully before placing the order. 

The XXXG-00W0 Wing Gundam Zero (ウイングガンダムゼロ EW Uingu Gandamu Zero?) (aka Wing Zero) is a mobile suit that appears in the OVA/movie Mobile Suit Gundam Wing Endless Waltz and the manga Mobile Suit Gundam Wing Endless Waltz: Glory of the Losers. Wing Zero was based on the Zero Frame technology developed by the five Gundam Scientists, which was an inner frame with all the necessary components for the mobile suit to operate, completely separate from the armor platings and energy conduits for weapons. The performance of the frame itself surpasses that of the OZ-00MS Tallgeese, and the complete separation of armor and internal structure allows Wing Zero to continue fighting after losing up to 90% of its armor.In the Glory of the Losers manga, Wing Zero is developed from the wreckage of the destroyed Wing Gundam Proto Zero, and upgraded with wing binders from the OZ-00MS Tallgeese Flugel. It combines the armament and equipment of the TV version and the EW version, such as having a shield and being able to transform into Neo-Bird Mode.

The MGSD Wing Gundam Zero EW from Mobile Suit Gundam Wing: Endless Waltz is a high-end Super Deformed (SD) model kit from Bandai's MGSD series. This model integrates Master Grade (MG) technology into SD Gundams, offering enhanced articulation and intricate details. Key Features: Articulated Wings: The main wings feature a five-layer structure with individually moving parts, allowing for expansive poses. They can unfold to reveal internal silver components and clear parts with a reflection-cut finish. The secondary wings have unfolding mechanisms where the lower feathers deploy when the upper feathers are raised. Transforming Mechanism: This is the first MGSD kit to incorporate a transforming mechanism, enabling two Neo Bird forms: Outer Atmospheric Mode: Main wings folded. Atmospheric Mode: Main wings deployed. Dynamic Articulation: The model boasts extensive articulation, including movable axes in the head and neck, shoulder armor that moves in conjunction with the upper sections, and a torso with multiple points of articulation for a wide range of poses. The front skirt armor expands forward to assist thigh movement. Detailed Internal Frame: The internal frame is crafted with multiple gimmicks and utilizes Realistic Metallic Gloss Injection, providing MG-class details in SD scale. Clear parts are layered over detailed internal components to create realistic multi-layered structures. Weapons and Accessories: Twin Buster Rifle: Features a barrel-extension gimmick and a joint deployment mechanism that connects to the arm for enhanced holding power. Shield: Secured at three points to prevent dislodging. Effect Parts: Includes two effect parts for dynamic display options. Marking Stickers: For added detail and customization. Release Information: Released in 2024 as part of Bandai's MGSD line, this model kit showcases the Wing Gundam Zero EW in a stylized SD form while preserving the level of detail expected from Master Grade models. The MGSD Wing Gundam Zero EW is ideal for collectors and Gunpla enthusiasts who want a highly detailed, articulated model in a compact and stylized form. The transforming wings and the intricate internal frame set this kit apart as a must-have for fans of Gundam Wing.

The MS-06S Zaku II Commander Type (aka MS-06S Zaku II, MS-06S, S Type) is a mobile suit introduced in Mobile Suit Gundam. One such unit was famously piloted by Char Aznable. Developed in response to veteran pilots' request for a high performance unit, the MS-06S Zaku II Commander Type was far more mobile than its predecessor, the MS-06F Zaku II, but was also far more difficult to control. Compared to the F Type, the S Type's vernier nozzles were enlarged, and the output of its main thrusters were increased by 30% while retaining the same size. To make space for the improved thrusters and enlarged propellant tanks, various automatic control systems of the F Type were removed. While this reduced S Type's operability, it also enabled experienced pilots to disable many unnecessary limiters and push the mobile suit to its structural limit.Other changes from the F Type included the S Type's generator being 5% lighter, and its armor composition and structure were improved, improving its overall power-weight ratio. Finally, the S Type were all equipped with a head-mounted multi-blade antenna. Though the antenna itself was identical to those found on the F Type, the structure at its base was different, giving it improved communications and enemy detection capabilities. Despite having many special internal components, the S Type still shared 80-90% of its parts with the F Type, making it easy to resupply and maintain. This also meant that like the F Type, it could easily be modified to operate in space or under gravity.

HG 1/144 Schwalbe Graze (McGillis Custom) – The Swift and Deadly Commander Unit Introducing the HG 1/144 Schwalbe Graze (McGillis Custom), a high-grade model kit from the Mobile Suit Gundam: Iron-Blooded Orphans series. This model represents the personalized mobile suit of McGillis Fareed, showcasing a unique design and enhanced weaponry that reflect his elite status and combat prowess. Key Features: Distinctive Design: Features a sleek and aerodynamic frame with a striking blue color scheme, distinguishing it from standard Graze units. Enhanced Weaponry: Equipped with specialized armaments, including a rifle, battle axe, and shooting claw, providing versatile combat options. Articulation & Poseability: Built with a highly articulated frame, allowing for dynamic poses that capture the mobile suit's agility and combat readiness. Detailed Engineering: Intricate panel lines and mechanical details faithfully replicate the Schwalbe Graze's appearance from the series. High-Grade Build: As part of the High Grade (HG) line, this kit offers a satisfying building experience suitable for both beginners and experienced builders.

Bandai China 2024 Limited Edition MG 1/100 Cross Contrast Colors Gundam Barbatos Bandai China Estimated Release Date: December 2024 Estimated Delivery: 1st Quarter 2025 Grade: MG Scale: 1/100 Please read our Preorder FAQ carefully before placing the order.  

MSJ-105CC Chuchu's Demi Trainer (デミトレーナー チュチュ専用機 Demitorēnā Chuchu Sen'yō-ki?) is a mobile suit introduced in Mobile Suit Gundam the Witch from Mercury and is piloted by Chuatury Panlunch. The base MSJ-105 Demi Trainer is an older model in Burion's Demi Trainer line. The MSJ-105CC is Chuatury Panlunch's customized personal unit and the result of "Project Chuchu". As students in Asticassia School of Technology's Earth House are typically unable to afford the latest, most advanced Demi Trainer models, it is common for them to purchase obsolete Demi Trainers and modify them extensively to try to reach parity with the newer models. In Chuchu's case, her unit was customized for hit-and-run tactics. It is armed with a long-distance beam rifle to strike targets from afar, and its legs feature acceleration and deceleration enhancements for rapid, precise maneuvers. The alterations to the legs make the unit difficult to control for pilots who lack high-g training, however. Although Chuchu disliked the idea of retreating and repositioning in between attacks, she eventually came to accept the MSJ-105CC's design.

The PFF-X7II+/P9 Plutine Gundam (プルタインガンダム Purutain gandamu?) is a Gunpla introduced in Gundam Build Metaverse. A variant of the Core Gundam II Plus, it is built and piloted by Hiroto Kuga. A dueling version of Hiroto's Core Gundam II Plus formed by docking it with the Pluto Armor. When Hiroto learned about Ecopla, a project which utilizes recycled materials, he saw a connection between it and Pluto, the planet of destruction and regeneration. This inspired him to create the ninth unit of the PLANETS System. The exterior of the unit utilizes the specially coated "EP Armor". This black-colored armor can convert kinetic energy released by the unit as well as from nearby enemy into supplemental energy, allowing for significant improvement in combat sustainability. The combination of the EP Armor with equipment specialized for hand-to-hand combat, makes the Plutine Gundam suited for repeating destruction and regeneration in close-range battles.