Under $25

The GN-003 Gundam Kyrios (aka Gundam Kyrios, Kyrios) is a mobile suit featured in season one of Mobile Suit Gundam 00 and is piloted by Allelujah Haptism. In AD 2307, the paramilitary organization, Celestial Being, deployed four third-generation Gundams with the objective of eradicating world conflicts through armed interventions. The Gundam Kyrios is one of them and its most prominent feature is a transformation mechanism for switching between MS Form (also known as "MS Mode") and Flight Form (also known as "Flight Mode", "Flight Position") which was tested by its predecessor, the second-generation GNY-003 Gundam Abulhool. The Kyrios' mobility and maneuverability are greatly enhanced in Flight Form, exceeding those of the other Gundams and mobile suits utilized by the three major powers. The transformation mechanism also grants high operability, allowing Kyrios to carry another mobile suit on top during Flight Form and a partial transformation where its upper body turns into that of the MS Form's is also possible. Like its fellow Gundams, Kyrios has a semi-perpetual GN Drive in the center of its body that provides almost limitless energy and produces special, multifunctional GN Particles.Mobile suits capable of switching between MS and Flight Forms are also deployed by two major powers, but they are not designed with mid-air transformation in mind like Kyrios. The old VMS-15 Union Realdo and AEU-05 AEU Hellion (belonging to the Union and AEU respectively) have incomplete transformation mechanisms, requiring parts swapping in designated facilities to operate in the different forms; although their respective successor, the SVMS-01 Union Flag and AEU-09 AEU Enact, can transform in mid-air, this is achieved through a piloting technique known as "Graham Maneuver" (also known as "Graham Special") and not an inherent feature. On the other hand, the Kyrios has a complete transformation mechanism enabled by a control system using the special GN Particles. As a result, not only can Kyrios freely transform within and outside of the atmosphere, it also gains mobility, maneuverability and versatility that greatly surpassed those of other mobile suits with Flight Forms. It should be noted that Kyrios' transformation still requires some degree of piloting skills, but can theoretically be performed by anyone.The Kyrios' cockpit is similar to other Gundams', but the control system differs due to its Flight Form and the pilot seat can rotate to match the different forms. Another feature that takes into account the Flight Form's design is the mounting of Kyrios' main thrusters, a pair of GN Verniers, on the outer side of each leg. Such a layout is rare for Gundams, where the main thrusters are often located on the back and waist, and ensures the verniers face backward to generate high thrust during Kyrios' Flight Form. The GN Verniers create thrust by releasing GN Particles, and have a mechanism whereby their cores are revealed when being activated and when increasing their output. While all Gundams can fly due to the use of GN Particles, only Kyrios can achieve high-speed flight due to its more aerodynamic shape while in Flight Form. Various sensors are built into the Flight Form's nose unit, giving it high detection capabilities. Due to the nose unit and stabilizer being folded onto the back while in MS Form, the conical rear cover of the Kyrios' GN Drive has a flatter end than the other Gundams'.Light purple-colored "GN Cables" in various body locations facilitate the supply of GN Particles to each part of the Kyrios and for attitude control purposes via the particles' mass manipulation ability. These GN Particles are also utilized for beam weaponry, generation of defensive GN Field barrier, and stealth purposes as they can cause electromagnetic interference, leaving conventional communications and radar devices useless. Additionally, by maximizing its particle emission and deploying them in front of itself, Kyrios can conduct atmospheric entry on its own. This is because the emitted particles can shield the Kyrios from the aerodynamic heating caused by the adiabatic compression during the entry process. A pair of torso-mounted clavicle antennas serves as the primary control device for these special particles, and GN Condensers are placed throughout the body to store excess particles, ensuring a reserve that the Kyrios can rely on when its operation consumed more particles than what the GN Drive can produce instantaneously. All these GN Particles related features are also found on the other Gundams.Compared to other Gundams, Kyrios' armament configuration is simple and consisted of GN Beam Submachine Gun, GN Shield, GN Beam Sabers and GN Vulcans, but its high mobility enabled it to display high combat capabilities. It can also mount optional weapons in the form of GN Hand Missile Units, Tail Unit equipped with various missiles and air-to-surface bombs, and Tail Booster with large GN Verniers and GN Cannons. Its MS Form has a balance of ranged and melee combat capabilities, with destructive power comparable to its fellow Gundams, while its Flight Form excels at high-speed hit-and-run attacks. With the Tail Unit attached, the Flight Form can adapt to a variety of missions, and when fitted with the Tail Booster instead, the Flight Form's mobility and firepower are boosted. Like its fellow Gundams, the Kyrios can activate the "Trans-Am System" during an emergency, boosting its thrust and defensive strength, as well as increase its output to three times that of its normal specifications for a limited time period. The Kyrios also glows red as a side-effect, but this system is a double-edged sword as the machine's performance drops dramatically once it ends.Optional add-on equipment was also developed, namely the Gust equipment that changes Kyrios into the GN-003/af-G02 Gundam Kyrios Gust, which has enhanced mobility, long-range attack capabilities and can operate at up to 600 km in the thermosphere. Celestial Being was defeated by the UN Forces in AD 2308 and the HRL acquired the wrecked Kyrios, minus its GN Drive that was ejected prior to capture. A reborn Celestial Being then surfaced in AD 2312 with new Gundams including the transformable GN-007 Arios Gundam, Kyrios' successor with superior specifications. Around the same time, the Earth Sphere Federation's autonomous peacekeeping force, the A-Laws, deployed the new GNX-704T Ahead developed by former HRL engineers; these engineers were selected as the developers partly because the HRL seemingly gained an edge in mobile suit development through the tests they conducted on the Kyrios. Feedback from the data of the captured Kyrios was later utilized by former AEU and Union engineers in the development of the transformable GNX-903VS Brave (Standard Test Type) and its commander variant, which were deployed by the Earth Sphere Federation in AD 2314.

The ASW-G-08 Gundam Barbatos is the main mobile suit in the first season of the Mobile Suit Gundam IRON-BLOODED ORPHANS anime and is piloted by Mikazuki Augus. The ASW-G-08 Gundam Barbatos is one of 72 "Gundam" frames that was produced and used in the Calamity War, roughly 300 years ago. After it was recovered, Chryse Guard Security used it as a power reactor. Aside from the fact that its Ahab Reactors were still functional, this was done mainly because Barbatos' cockpit was missing when it was found. A new cockpit similar to the one used by the CGS mobile workers was installed prior to its redeployment by the 3rd Group. Poor maintenance over the centuries since the Calamity War has degraded the Barbatos' armor and full combat potential. This is later rectified by Teiwaz technicians, who not only restored the Barbatos to its original look but also returned it back to a performance close to its original.Gundam units like the Barbatos are able to achieve a high energy output because they possess two Ahab Reactors. However because it is difficult to run them in parallel operation, only a total of 72 Gundam frames were ever produced. The burden experienced by the pilot is high as a result of the high output and maneuverability; however it's mitigated by the implementation of inertial control due to the use of Ahab Particles generated from the reactor when a phase transition occurs inside its vacuum device. The cockpit structure is positioned in front of the reactor to take advantage of this. Among the same frame machines, the Gundam Barbatos has been adjusted for an emphasis on versatility, it has the potential to adapt to every circumstances by exchanging its equipment. It can also use weapons and armor from defeated enemies to improve its fighting capabilities.

Gan Ning Crossbone Gundam- First appears in Enkotan. The head of staff at the Qiao's manufacturing company.

Zhuge Liang Freedom Gundam- A young scientific prodigy. He was formerly working under a renowned researcher, whose current whereabouts are unknown.

Xiahou Dun Tallgeese III- Cao Cao's cousin. They have been together since childhood, and having survived countless battlefields together, they share a trust even stronger than blood ties. Compared to his younger brother Xiahou Yuan, his personality has a wild side.

Huang Zhong Gundam Dynames- The master mechanic of Dragon's Watch, on whom Liu Bei and the others rely. He is an expert in all mecha, and solely responsible for maintaining and customizing their bikes. In combat, he also excels in sniping and marksmanship.

The RX-178 Gundam Mk-II is a mobile suit introduced in the anime series Mobile Suit Zeta Gundam. It is a successor of the famous RX-78-2 Gundam that served in the One Year War. A direct descendant of the RX-78-2 Gundam developed by the Titans, the Gundam Mk-II is the first mobile suit to utilize the new movable frame concept. In this new concept, rather than merely serving as a structural framework, the movable frame incorporates all the mobile suit's vital mechanisms, including the actuators and control systems required for movement, and excludes the mobile suit's weapons, armor, and propellant tanks. This approach dramatically improves the mobile suit's responsiveness, reliability, and energy efficiency, as well as making it far more agile than traditional designs.Another characteristic of the Gundam Mk-II is that some of its legs' movable parts are exposed and this design feature is based on the prevailing idea at that time that avoiding being hit by the enemy is the preferable choice. The origin for this idea is because no existing armor can fully protect against beam weaponry, thus it is better to increase the mobile suit's mobility by weight reduction rather than equip more armor which would lead to a higher weight and lower mobility.The mobile suit also has what had become the standard 360-degree panoramic screen and linear seat fitted in a circular cockpit that also functions as an escape pod. The multiple panels of the panoramic screen make up a single 360-degree display, covering the entire inner surface of the cockpit. The image displayed on this screen is a computer simulation constructed from the cameras distributed around the mobile suit's exterior. The viewpoint is that of the mobile suit's head, and the image is carefully edited to remove the mobile suit itself. The linear seat is suspended in the center of the cockpit, supported by a linear arm which electromagnetically counters G-forces and impact shocks in order to protect the pilot. Together, the panoramic screen and the linear seat gives the pilot a larger field of view and eliminates blind spots.The most notable flaw of the Gundam Mk-II is that it is armored using the obsolete titanium alloy ceramic composite. Another flaw is that the movable frame's leg sections have rigidity issues associated with the strength of the structural material used, and this problem persisted even after six design revisions. Despite this, for a brief time period, the Gundam Mk-II's movable frame makes it one of the most agile mobile suits available. Three Gundam Mk-II were produced in total. They were later stolen by the Anti-Earth Union Group (AEUG) and given a new paint scheme. Despite being used by two different factions, the Gundam Mk-II's weaponry remains mostly unchanged. Its only fixed weapons are two beam sabers, but it can carry a vulcan pod, a shield, a beam rifle, a hyper bazooka and a clay bazooka if necessary.

The AMX-003 (MMT-1) Gaza-C is a mass-production transformable mobile suit first featured in the Mobile Suit Zeta Gundam and Mobile Suit Gundam ZZ anime series. The design was given an update and appears in the photo-novel/OVA Mobile Suit Gundam Unicorn. Like many mobile suits designed around the time of the Gryps Conflict, the Gaza-C line of mobile suits from Axis Zeon were built around the concept of a versatile transforming frame. Although the Gaza-C was approved and put into mass production, there were minor flaws in the design, and the manufacturing resources of the Axis asteroid was limited, so many of the Gaza-C's parts were recycled from older Gaza-A and Gaza-B construction mobile suits.Despite this, the Gaza-C was a successful design that provided an excellent balance of speed, maneuverability, and firepower for little cost and was the first mass-produced version of the Gaza-series. However, one major problem with the Gaza-C is that due to its flimsy construction, the mobile suit would literally fall apart after using its transformation systems only a few times; the average lifespan of a Gaza-C would be three combat missions. This flaw was remedied in later Gaza models.

The MSN-06S Sinanju (aka Sinanju) is a mobile suit featured in the Mobile Suit Gundam Unicorn novel, its OVA adaptation and the television re-cut. A modified version of the MSN-06S Sinanju Stein, it was piloted by Full Frontal.

The RGM-89De Jegan [ECOAS Type] (aka Jegan "Four Eyes") is a special operations mobile suit based on the RGM-89D Jegan for use by ECOAS. It first appeared in the OVA series Mobile Suit Gundam Unicorn. The RGM-89De Jegan [ECOAS Type] is a special version of the RGM-89D Jegan D Type used by the Earth Federation's special task group ECOAS, and are deployed in ECOAS missions that are expected to involve direct combat with mobile suits. It has a special visor and extra chest armor for increased survivability. The ECOAS Type features the same armaments as the normal Jegan, consisting of a beam saber, a beam rifle, a three slot hand grenade rack, and a shield that has two two-tube missile launchers built in. It could also be outfitted with a bazooka for increased firepower and custom units with different weaponry also exist.

The XXXG-01W Wing Gundam (aka Zero-One or Gundam 01) is the titular mobile suit of the anime Mobile Suit Gundam Wing. It was primarily piloted by Heero Yuy. Out of the five original Gundams created for Operation Meteor, Wing Gundam is the most well-balanced in terms of abilities and bears the closest resemblance to their common ancestor: the XXXG-00W0 Wing Gundam Zero. Like Wing Zero, the Wing Gundam can transform into an alternate flight form known as "Bird Mode" and has a powerful Buster Rifle as part of its armaments. However, the "ZERO System" interface (which had technical problems) and other parts considered to be excessive were not included, and the skills of the pilot are needed to make up for the shortfall. Its cockpit is a spherical capsule surrounded by a linear frame, and it swivels in the same direction as the mobile suit's head. Unlike the standard OZ cockpit, it is a floating cockpit with a shock mitigation function.The major contributor to Wing's mobility is the pair of wing units on its backpack. These units not only generate lift, but can also change the aerodynamic characteristics of the mobile suit through the movements of their individual panels, supporting a range of speeds from stall to hypersonic. Even in outer space, these wing units exhibit high attitude control capability using both AMBAC and built-in vernier thrusters. By transforming into Bird Mode, Wing's mobility and movement range are increased further, allowing it to conduct operations that other Gundams could not. The leg thrusters on the back of the knees serve as the main verniers in Bird Mode, and are also used for dashing on the ground in MS mode.

The MSN-02 Zeong (ジオング Jiongu) is a prototype mobile suit appearing in the anime Mobile Suit Gundam. It was first piloted by the "Red Comet" Char Aznable. Developed by the Principality of Zeon at the A Baoa Qu space fortress during the One Year War, the Zeong was built exclusively for Newtype pilots. It initially had the model number "MS-16X" and was developed based on the data of multiple experimental units. The Zeong was also the first mobile suit to use the Psycommu system, which allowed a Newtype pilot to utilize its wire-guided remote-controlled forearms for all-range attack effectively. Each forearm was built with five mega particle cannons in its fingers. The Zeong also has three more mega particle cannons on its body, two in the waist and one in the head.The Zeong was expected to be around 35m tall when fully completed, making it much larger than most mobile suits of the time. Its large size was attributed to the difficulties in miniaturizing the Psycommu system. Though another account suggested that it was due to the need for larger generators to power its thirteen mega particle cannons. In the end, this mobile suit was only 80% complete when it was deployed, thus its lack of legs and exposed upper arms. Although the legs would aid in the AMBAC System, their omission did not hinder the Zeong from performing at 100% combat capacity, since two rocket thrusters were installed at where the legs were supposed to be.Although the Zeong was developed for Newtypes, it could also be operated by normal pilots. In this situation, the mobile suit would be controlled by a pilot in the torso cockpit and a gunner in the head cockpit. The two cockpits were connected by a traversal tube. In contrast, a single Newtype pilot could fully operate the Zeong from either one of the cockpits, though due to the mobile suit's prototype nature, its activation and initialization could only be done in the torso cockpit. In order to ensure the recovery of its data and pilot, especially if the pilot was a Newtype, the head also doubled as an escape pod and could detach from the main body when necessary.

The RX-78GP01-Fb Gundam "Zephyranthes" Full Burnern is the upgraded space-use version of the RX-78GP01 Gundam "Zephyranthes". Introduced in the anime OVA series Mobile Suit Gundam 0083: Stardust Memory, it is piloted by Kou Uraki. The RX-78GP01 Gundam "Zephyranthes" was designed to operate in both Earth and Space by using the appropriate Core Fighter and although the space-use unit was ready, the suit was unfortunately wrecked before it could be fitted on. The damaged GP01 was recovered and the engineers of Anaheim Electronics gave it a massive overhaul while repairing it, creating the RX-78GP01-Fb Gundam "Zephyranthes" Full Burnern, which is designed for space combat. The renovation process was completed in two days, with operational testing carried out at Anaheim Electronics's Livermore factory.Its armor is more streamlined for better mobility in space, and thrusters are mounted in the chest, shoulders and legs. The air-intakes on the chest are replaced with reverse thrusters, with the covers expanding during use. The shoulder armor now contains shoulder vernier pods, and added thrusters are attached to the back of the legs and the soles. Propellant tanks are built into the shins to further extend the suit's operating time. The backpack is equipped with built-in generators and also has the most noticeable addition: the two Universal Boost Pods. The Universal Boost Pods allow the Full Burnern to have superior acceleration and mobility when compared to other units at that time. As a result, the pilot has to contend with high G-forces due to overwhelming acceleration.

The ZGMF-X20A Strike Freedom Gundam (aka Strike Freedom, Freedom) is the successor of the ZGMF-X10A Freedom Gundam. Introduced in Mobile Suit Gundam SEED Destiny, it is piloted by Kira Yamato.

The HG BF 1/144 Reversible Gundam is a High Grade model kit from the "Gundam Build Fighters Battlogue" series. Released in 2017, this kit features: Articulated joints for dynamic posing capabilities. Weapons including: 2 GN Beam Pistols 2 GN Dragon Claws 2 Large GN Beam Sabers Transformation capability into a creature-like "Tank Mode." Snap-fit assembly with color-coded plastic parts, minimizing the need for painting. Once assembled, the model stands approximately 12.7 cm tall, making it a notable addition to any Gundam collection.

Expand your 30 Minutes Missions (30MM) collection with the Bandai 30MM 66 EXM-H15E Acerby (Type-E)! This kit is part of the 30MM series, known for its quick assembly and high customizability. The Acerby (Type-E) features a sleek, futuristic design with enhanced mobility and combat capabilities, making it a versatile addition to your mecha lineup. With its modular design and compatibility with other 30MM kits, this model offers endless possibilities for customization and creative builds. Product Features Futuristic Design: The Acerby (Type-E) features a sleek and aerodynamic design with enhanced mobility and combat capabilities. Quick Assembly: Designed to be assembled in approximately 30 minutes, making it ideal for hobbyists of all skill levels. High Customizability: Compatible with other 30MM kits, allowing for endless customization and creative combinations. Articulation and Poseability: Equipped with multiple points of articulation for dynamic and action-packed poses. No Glue Required: Snap-together design ensures easy assembly without the need for glue or paint. Includes Accessories: Comes with a variety of weapons and accessories to enhance display and play options. Release Information Series: 30 Minutes Missions (30MM) Scale: 1/144 Manufacturer: Bandai Recommended Age: 15 and up

Upgrade your 30 Minutes Missions (30MM) and 30 Minutes Fantasy (30MF) mecha with the Bandai 30MF Class Up Armor (Rosan Warrior)! This expansion set introduces a bold, warrior-themed armor design, perfect for customizing your Rosan Fighter or other 30MM/30MF kits. Designed for quick assembly and seamless integration, this Class Up Armor set adds a new layer of creativity and playability to your collection. Whether you're building a fantasy warrior or a futuristic mecha, the Rosan Warrior armor offers endless customization possibilities. Product Features Warrior-Themed Design: Adds a bold, fantasy-inspired warrior aesthetic to your 30MM/30MF mecha. Compatibility: Fully compatible with 30 Minutes Missions (30MM) and 30 Minutes Fantasy (30MF) kits, including the Rosan Fighter. Quick Assembly: Designed for fast and easy assembly, with no glue or paint required. High Customizability: Mix and match parts with other 30MM/30MF kits to create unique designs. Includes Accessories: Comes with additional weapons, armor pieces, and decorative elements for enhanced customization. Articulation-Friendly: Designed to maintain the poseability of your mecha while adding new layers of detail. Release Information Series: 30 Minutes Missions (30MM) / 30 Minutes Fantasy (30MF) Type: Class Up Armor Expansion Set Manufacturer: Bandai Recommended Age: 15 and up

Enhance your 30 Minutes Missions (30MM) and 30 Minutes Fantasy (30MF) mecha with the Bandai 30MF Class Up Armor (Rosan Viking)! This expansion set introduces a rugged, Viking-inspired armor design, perfect for customizing your Rosan Fighter or other 30MM/30MF kits. Designed for quick assembly and seamless integration, this Class Up Armor set adds a new layer of creativity and playability to your collection. Whether you're building a fantasy warrior or a futuristic mecha, the Rosan Viking armor offers endless customization possibilities. Product Features Viking-Themed Design: Adds a rugged, fantasy-inspired Viking aesthetic to your 30MM/30MF mecha. Compatibility: Fully compatible with 30 Minutes Missions (30MM) and 30 Minutes Fantasy (30MF) kits, including the Rosan Fighter. Quick Assembly: Designed for fast and easy assembly, with no glue or paint required. High Customizability: Mix and match parts with other 30MM/30MF kits to create unique designs. Includes Accessories: Comes with additional weapons, armor pieces, and decorative elements for enhanced customization. Articulation-Friendly: Designed to maintain the poseability of your mecha while adding new layers of detail. Release Information Series: 30 Minutes Missions (30MM) / 30 Minutes Fantasy (30MF) Type: Class Up Armor Expansion Set Manufacturer: Bandai Recommended Age: 15 and up

The Bandai HGUC 1/144 Nemo (Z Gundam Color) from Mobile Suit Z Gundam is a high-quality model kit that brings the distinctive Nemo mobile suit to life in a 1/144 scale. Featuring the color scheme inspired by the iconic Z Gundam, this kit offers an impressive level of detail and articulation in the HGUC (High Grade Universal Century) series. Ideal for both beginner and intermediate builders, it delivers a satisfying building experience and a fantastic display piece once completed. Key Features: Scale and Materials: 1/144 scale model kit crafted from durable plastic, offering easy assembly and excellent detail. Articulation: Features great articulation for dynamic poses, including movement in the arms, legs, and head. Accessories: Includes the Nemo's signature beam rifle, shield, and beam saber, all crafted with precise detailing for realistic display. Design Details: The Z Gundam-inspired color scheme provides a unique aesthetic that sets this Nemo apart from its other variants, with molded details and stickers to enhance its appearance. Release Information: Released on March 15, 2005, as part of the HGUC line, this model kit stands as an essential piece for Gunpla collectors and fans of the Mobile Suit Z Gundam series. The Nemo model brings both a sense of nostalgia and fresh design for Gunpla enthusiasts. The Bandai HGUC 1/144 Nemo (Z Gundam Color) is an excellent addition to any collection, providing a high-quality, affordable model for fans looking to recreate the powerful mobile suit from Mobile Suit Z Gundam.

The Bandai HG00 1/144 GN-007GNHW/M Arios Gundam GNHW/M is part of the Gundam 00 universe, showcasing a high-grade (HG) model of the Arios Gundam in its GN-007 GNHW/M variant. Known for its versatile and sleek design, the Arios Gundam offers a unique transformation mechanism and sophisticated weaponry. Features: Unique Transformation: The Arios Gundam can switch between flight mode and mobile suit mode, providing a dynamic range of display options and posing opportunities. Articulation: The model offers excellent articulation, particularly in the legs and arms, allowing for various action poses and configurations from the series. Weapons and Accessories: Includes: GN Beam Rifle GN Sword (which can be mounted on the back) GN Shield GNHW/M Variant: This variant of the Arios Gundam comes with enhanced mobility and weaponry, offering a more advanced configuration compared to the standard model. Release Information: Released in [Year] as part of the HG00 line, this model kit is an excellent addition to any Gundam 00 collection. With its detailed design and dynamic features, it’s a must-have for both beginners and experienced modelers. Once assembled, the GN-007GNHW/M Arios Gundam GNHW/M is a highly poseable figure that can be displayed in multiple dynamic action poses, making it a standout piece for display or photography.