Under $25

The MBF-P02 Gundam Astray Red Frame is a Mobile Suit introduced in the manga Mobile Suit Gundam SEED Astray. It is piloted by Junk Guild member Lowe Guele. The MBF-P02 Gundam Astray Red Frame is one of five identical prototype mobile suits developed by Orb using stolen data from the Earth Alliance's G Project. Its original concept was to be a MS that could be piloted by Naturals, and it was eventually loaded with an incomplete Natural-use OS. Most of the technology from the G Project is successfully copied with the exception of Phase Shift armor. In its place, the Gundam Astrays' designers made the machines out of a lighter foam metal compound, with minimal armor over the frame. This made the mobile suits lighter and faster than their G Project counterparts. All five prototype Gundam Astrays are also designed with a backpack that can be lowered to the back skirt armor, allowing the mounting of additional equipment on the back. The Red Frame initially had the same armament as the other prototype Gundam Astrays, consisting of two head-mounted "Igelstellung" 75mm multi-barrel CIWS, two backpack-mounted beam sabers for close combat, a Type 71 beam rifle and a physical shield. Red Frame's pilot, Lowe Guele, eventually acquired another armament - the "Gerbera Straight" katana. To wield this katana effectively, the Red Frame's OS was modified. Lowe also created a 150 meter long version of this sword, however it cannot be carried by the Red Frame in its normal configuration. Lowe also designed a set of upgrades for Red Frame, but they are used to repair Gai's damaged MBF-P03 Gundam Astray Blue Frame instead. When there is a need for flight capability, Red Frame can be fitted with the Flight Unit and when it needs to dive underwater, it can use the Salvage Unit. After his return from Mars, Lowe developed the Caletvwlch and the Ddraig Head. The former is a multifunctional handheld equipment, while the latter is a special head unit designed to complement the former. Like other mobile suits that use beam weapons, the Red Frame is equipped with hand plugs to exchange energy with weapons the suit carries. Although considered a misuse of the system, the energy from the hand plug can be manipulated into an energy ball and discharged. This is often used by Lowe as an emergency weapon, for example to temporarily blind enemies. The mysterious organization, Librarian Works, later created a copy of the Red Frame. Known as Replica Red Frame, it has the same capabilities as the real Red Frame.

ExAMACS units with enhanced command communication abilities developed by the Byron Forces around the same time as the Portanova. They are equipped with a multifunctional radar placed on top of their backpacks that allows units to instantly analyze combat situations. They are specifically designed for local battles and have highly expandable forearms and legs with enhanced bulletproof capabilities. The range of power of the standardly equipped handguns can be changed by using expansion modules.

The OZ-06MS Leo is a mass-produced general purpose mobile suit introduced in the TV anime Mobile Suit Gundam Wing. The OZ-06MS Leo was the first mass-produced MS developed by OZ, based on the blueprints of the first combat MS in A.C. history, the "OZ-00MS Tallgeese". The engineer in charge of the development was OZ's Seis Clark. Unlike the Tallgeese, which was so focused on performance that its design disregarded safety and could not be piloted by ordinary people, the Leo was designed to be piloted by normal soldiers, and focused on ease of production and versatility. This was also due to OZ and the United Earth Sphere Alliance (UESA) being at odds with the space colonies at the time of its development, and priority was placed on production and its role as a threatening machine rather than excessive performance. As a result, it was simplified and downsized to a level where it could be mass-produced. The back, front and rear of both shoulders, and the sides of the thighs have mechanisms for attaching optional equipment, and by changing its equipment, the Leo can respond to a variety of battlefields. In addition, a performance index for mobile suit, the "Ability Level", was established by setting each of the Leo's performance values at 100 and evaluating the performance of other machines against them.

F/D-20 Zowort Heavy is a mobile suit introduced in Mobile Suit Gundam the Witch from Mercury. The Zowort Heavy is a combat-oriented model of the F/D-19 Zowort with significant upgrades. Its components have been treated to allow sustained use in multitudes of harsh environments in atmospheric conditions. Its stability in flight has also been improved over the basic model giving it a surplus loading capacity enabling large-scale firearms to be mounted on the back which is unrecomended for the Zowort. The left and right sides of the backpack could be outfitted with heavy weaponry depending on the pilot's requirements.

The System-∀99 ∀ Gundam (pronounced as "Turn A Gundam", aka "∀", "White Doll" or "Mustache") is the titular mobile suit of Turn A Gundam. It is piloted primarily by Loran Cehack. The Turn A Gundam was originally created for interstellar warfare in anticipation of invasion of forces outside the solar system and said to be the culmination of super-advanced technologies from generations past. As opposed to other weapons which were created to meet a specific purpose, the Turn A's design was unusual and built entirely on the premise of "single-machine operation", with the versatility to perform all military operations on its own. Owing to the fear of extrasolar forces, the Turn A was constructed with all restrictions of the development of weapons removed, and as a result no longer fits into the concept of a weapon.Unlike other mobile suits (even those that predate the Turn A itself), the Turn A is powered by a DHGCP (Discontinuous Hyperoscillation Gauge Collapsing Pile) power plant in its abdomen, which is essentially an artificial black hole. This is used in conjunction with an innovative reactionless I-Field Beam Drive system to move the suit's limbs and provide thrust. As a result, the unit's chest is almost entirely hollow and can equip various weapons inside, such as missiles or beam cannons. The legs are also hollow due to the use of the I-Field Beam Drive, and contain an array of thruster vanes which are used to power the suit's jumps and flight. This leaves the back of the unit free to store more weapons and equipment if desired. The Gundam's armor is also covered with self-repairing nanomachines, dubbed "Nanoskin".The Turn A's armaments consisted of a beam rifle, two beam cannons, two beam sabers and a shield. It can also mount various weapons (such as missiles) in the chest to compliment its basic weaponry. It can also use a powerful I-Field capable of covering a large area and affecting matter. To further enhance its combat power, the Turn A has support areas called DOC Bases (Device Operation Control) which hold various armaments, enabling it to adapt to the situation at hand by equipping a variety of weapons. One of these DOC Bases was discovered in C.C. 2345. However, the base had been sealed and not maintained by any nanomachines during the thousands of years the Turn A was buried, so almost all its weapons crumbled upon exposure to air. The only weapon still usable was a hyper hammer that was simple and thick enough to remain intact for a short while without maintenance.The Turn A's on-board nanomachines are capable of a devastating attack known as the "Moonlight Butterfly" (named after the visual appearance of the attack). The Turn A's nanomachines have the ability to disintegrate all matter that includes artificial objects as well as organic materials, and can merge with weather systems to create large ionic storms capable of covering a much wider area. These nanomachines can be used offensively or defensively for all range attack and defense. The nanomachines are capable not only of destroying technology however, but of maintaining and repairing it too. This ability is not instantaneous though, and it requires a considerable amount of time. The back weapon pallet of the Turn A was originally planned to be equipped with weapons based on the Seventh Generation Minovsky Physical Theory (7th-GMPT), a nondestructive MS-incapacitating technology, during the conceptual phase of the "System ∀". However, the development of such weapons was not completed in time for the demonstration test for "System ∀", and so beam sabers were provisionally installed for melee combat.

Scale: 1/100 Supported Grade: MG/RG/HG/EG Features: Adjustable angels Adjustable height 4 Colors to choose from

The ASW-G-01 Gundam Bael (ガンダムバエル Gandamu Baeru?) is a mobile suit introduced in the second season of Mobile Suit Gundam IRON-BLOODED ORPHANS anime. It was originally piloted by Agnika Kaieru, and more than 300 years later by McGillis Fareed. During the Calamity War, a quarter of the human population was lost due to the extensive fighting against the mobile armors, which had been developed for the efficient extermination of human beings. To stop these mobile armors, the Alaya-Vijnana System, which establishes compatibility between a person and a machine, was employed. During this process, 72 Gundam Frames were produced, and they came to be perceived as special due to the outstanding military achievement of Agnika Kaieru, who piloted the first Gundam Frame, the Gundam Bael.Compared to subsequent Gundam Frames, the Gundam Bael is a relatively standard unit with little special features. However, it was a key mobile suit in ending the war and became a figurehead of the Gjallarhorn. Thus, Agnika and Gundam Bael were idolized during those times. Gundam Bael's main armaments consisted only of two swords, and this was proof that Agnika was fully compatible with the mobile suit via the Alaya-Vijnana System. For Agnika, who realized superhuman reactions, no other armament was better than these unbreakable swords. Agnika passed away as the Gundam Bael went to sleep, and it was believed his soul resided within the Gundam Bael.The Gundam Bael was stored in the Gjallarhorn's headquarters, Vingolf, until it was awakened by McGillis Fareed. The mobile suit remained unchanged during its long slumber, so its frame structure, as well as its armaments, are as they were when Agnika was the pilot. The emblem on its left shoulder is a symbol of the Gjallarhorn at the time of the organization's formation.

The ASW-G-08 Gundam Barbatos is the main mobile suit in the first season of the Mobile Suit Gundam IRON-BLOODED ORPHANS anime and is piloted by Mikazuki Augus. The Gundam Barbatos is one of 72 "Gundam" frames that was produced and used in the Calamity War, roughly 300 years ago. After it was recovered, Chryse Guard Security used it as a power reactor. Aside from the fact that its Ahab Reactors were still functional, this was done mainly because Barbatos' cockpit was missing when it was found. A new cockpit similar to the one used by the CGS mobile workers was installed prior to its redeployment by the 3rd Group. Poor maintenance over the centuries since the Calamity War has degraded the Barbatos' armor and full combat potential. This is later rectified by Teiwaz technicians, who not only restored the Barbatos to its original look but also returned it back to a performance close to its original.Gundam units like the Barbatos are able to achieve a high energy output because they possess two Ahab Reactors. However because it is difficult to run them in parallel operation, only a total of 72 Gundam frames were ever produced. The burden experienced by the pilot is high as a result of the high output and maneuverability; however it's mitigated by the implementation of Inertial Control due to the use of Ahab Particles generated from the reactor when a phase transition occurs inside its vacuum device. The cockpit structure is positioned in front of the reactor to take advantage of this. Among the same frame machines, Barbatos has been adjusted for an emphasis on versatility, it has the potential to adapt to every circumstances by exchanging its equipment. It can also use weapons and armor from defeated enemies to improve its fighting capabilities.

The Tickbalang (ティックバラン Tikkubaran?) is a flight system from Mobile Suit Gundam the Witch from Mercury . It was a flatbed type flight system designed by Peil Technologies to allow mobile suits to cruise for long distances. Grips and footrests on top allowed a mobile suit to latch on. A mobile suit could also hang from the handles stored in the underbelly. Outfitted with 6 vectored nozzles for maximum propulsion, it could transport two standard mobile suits at once, one above and one below .

The MSN-00100 (MSN-100, MSN-001) Hyaku Shiki (百式, "Type 100") is a prototype Mobile Suit introduced in Mobile Suit Zeta Gundam and reappeared in the sequel Mobile Suit Gundam ZZ. It was primarily piloted by Quattro Bajeena during the Gryps Conflict and later by Beecha Oleg in the First Neo Zeon War. The Hyaku Shiki is a mobile suit built by Anaheim Electronics as part of the "Zeta Project". It was originally designed as the prototype transformable mobile suit, MSN-001 Delta Gundam which incorporated Anaheim Electronics' own "movable frame" technology and backpack-mounted wing binders for additional mobility. However, defects in the frame design led to problems in its transformation and the machine's development was soon abandoned.When the AEUG captured the Titans' RX-178 Gundam Mk-II, the movable frame technology of this newly acquired mobile suit assisted greatly in the advancement of the Zeta Project and also led to the redesigning of the Delta Gundam into the high performance, non-transformable Hyaku Shiki. Hyaku Shiki, which means 'Type 100' in Japanese, is named as such by its lead developer, Professor M.Nagano who hoped to create a mobile suit design that would endure for a hundred years. Because of the reliability of each device and its ease of access to the interior, the Hyaku Shiki was also used as a testbed for operational testing of various equipment under development.The Hyaku Shiki's gold colored appearance is due to the application of a beam-resistant coating on its armor, giving it some limited protection against beam attacks. The suit also has a unique sensor called the Image Directive Encode (IDE) system, which emits a red pattern when scanning or during precision aiming. It also retains several design features from the original Delta Gundam design, most notably the legs' front armor and backpack-mounted wing binders. The Delta Gundam's transformation capabilities later resurfaced in the MSN-001A1 Delta Plus.

The MS-04 Bugu (MS-04 ブグ?) is a mobile suit featured in the Mobile Suit Gundam: The Origin and Mobile Suit Gundam: The Origin MSD Cucuruz Doan's Island manga, the Mobile Suit Gundam: The Origin OVA, its television recut, and the Mobile Suit Discovery design series. Developed by Zeonic from the YMS-03 Waff , tests were conducted at the Dark Colony in U.C. 0077 . In U.C. 0078, Ramba Ral's Bugu fought in the Battle of Mare Smythii . The development of the mobile suit took a huge step forward thanks to the compact fusion reactor and fluid pulse system designed by Dr. Torenov Y. Minovsky, resulting in the birth of the prototype YMS-03 Waff. The MS-04 Bugu was completed using data gathered with the Waff, and it was designed with a focus on its mobility, maneuverability, and ease of production as a weapon, making this the first machine capable of handling genuine combat. To improve its mobility, the power pipes that transmitted energy as part of the fluid pulse system were attached to the outside of its armor, and the increased supply of the energy used to drive its limb joints gave it very high maneuverability. However, as is often the case in the development of high-performance prototypes, it was designed with no regard for ease of production. With its high production cost, it was unsuited for mass production, and the role of official mass-produced machine was given to the redesigned MS-05 Zaku I. Though the Bugu never entered mass production, several units were built .

The RGM-79G GM Command is a mobile suit that first appeared in the OVA Mobile Suit Gundam 0080: War in the Pocket. Following the success of the RGM-79D GM Cold Districts Type, a late production type GM deployed in the One Year War, development of new localized warfare machines using the suit as a basis started. The basic concept is to maintain the fundamental design of the GM Cold Districts Type while improving on its output and mobility. Demands of MS pilots who were unsatisfied with the original RGM-79 GM's performance were also taken into account, and with the upcoming counter offensive in space against the Principality of Zeon in mind, a decision was made to simultaneously developed a ground use unit and a space use unit. The end results were the ground use GM Command, and the space use RGM-79GS GM Command Space Type. Both suits were also used to collect data for the development of next generation mass production models.The GM Command is also called the "Colony Type" as it specialized in defending bases in space colonies and surrounding areas. For this reason, its output and weaponry were adjusted to reduce fatal damage to the colony's structure and walls. Specifications wise, the GM Command series is said to be a match for the Zeon's MS-14A Gelgoog, but as many of the machines were deployed to areas outside of the main battlefield that had low urgency, its functions were often suppressed and it could not display its full potential. To improve on the GM Cold Districts Type’s mobility, the GM Command series’ thrusters are distributed all over its body. Furthermore, the backpack, which contains the main propulsion system, was also boldly redesigned and optimized separately for the GM Command and GM Command Space Type. The placements of the thruster verniers on the GM Command's backpack are optimized based on simulations of operation within colonies, and they are pointed downwards for movements under gravity. Various sensors are also added to the backpack, replacing the normal GM's backpack beam saber rack.With the GM Command series use of a generator with higher output, intakes and ducts are also added to enhance cooling functions. This higher output generator is however a double-edged sword. Although it allows for full-scale operation of equipment like beam gun and beam rifle, such generators at that time could only be manufactured in zero gravity facilities, so mass production of the suit then at the Earth Federation Forces’ largest production facility at Jaburo was not possible. This had a negative impact on the suit's production number during the war.Due to the accumulation of manufacturing and designing knowledge, the GM Command series' maintainability and operability was greatly improved compared to the very first mass production models that had inconsistent standards. Unlike the normal GM, the GM Command series has additional sensors in the head such as environment monitoring sensors to thoroughly detect human presence/survivability, and this boosts the suit's anti-personnel and anti-material evasive capabilities. The GM Command series is also the first in the GM series to utilize mono-eye camera in the head to improve producibility. Communication capabilities are enhanced via the shoulder antenna, which also helps to prevent interferences or jamming caused by frequency bands used by civilians inside and outside of colonies. It was relatively easy to change the GM Command series' armor, backpack, and other parts; furthermore, its specifications can also be changed with little modification to the base structures. The suit served as the base for the RGM-79SP GM Sniper II.As the GM Command series was deployed as replenishment units during the war, only a small number were produced. Assignment of the machine to experienced MS pilots was prioritized, and as these pilots were often appointed as commanders of newly formed MS platoon, the GM Command series also gained a reputation as a 'Commander Use Unit' even though it was not specifically built for commanders. There were also cases where the suit was supplied on a platoon scale, leading to a considerable number of operational units in total.

ExAMACS units with enhanced command communication abilities developed by the Byron Forces around the same time as the Portanova. They are equipped with a multifunctional radar placed on top of their backpacks that allows units to instantly analyze combat situations. They are specifically designed for local battles and have highly expandable forearms and legs with enhanced bulletproof capabilities. The range of power of the standardly equipped handguns can be changed by using expansion modules.

ExAMACS units with enhanced command communication abilities developed by the Byron Forces around the same time as the Portanova. They are equipped with a multifunctional radar placed on top of their backpacks that allows units to instantly analyze combat situations. They are specifically designed for local battles and have highly expandable forearms and legs with enhanced bulletproof capabilities. The range of power of the standardly equipped handguns can be changed by using expansion modules.

The MSJ-06II-A Tieren Ground Type (aka Tieren Ground Type, Tieren) is a mobile suit introduced in season one of Mobile Suit Gundam 00.

The GF13-017NJII God Gundam (aka G Gundam, Burning Gundam in the English dub) is the titular Mobile Fighter of Mobile Fighter G Gundam. It was the second Mobile Fighter used by Neo Japan in the 13th Gundam Fight, and is piloted by Domon Kasshu.

The CFP-013 Heindree Sturm (ハインドリー・シュトルム Haindorī Shutorumu?) is a mobile suit introduced in Mobile Suit Gundam the Witch from Mercury. Part of the Heindree Series, the latest all-purpose Mobile Suits produced by Grassley Defence Systems based on the Hein OS the Hendree Sturm is optimized for active combat. It is a 4th generation mobile suit and the new flagship model of Grassley having been significantly upgraded based on data and engineering expertise gathered from the production of its predecessor, the Heingra.

The MS-06C-6/R6 Zaku II is a mobile suit featured in the Mobile Suit Gundam: The Origin manga. This variant of the MS-06 Zaku II was used by Char Aznable's crew on the Falmer.The Zaku II units deployed during the first battles of the One Year War, such as the Clash of Loum, were mainly early production models known as the Type C. The Type C units were developed to be utilized in space and were later customized into the Type C-5 and Type C-6. Both Types C-5 and C-6 had cockpit hatches shaped differently from the Type C and Type F (which appeared after Type C-6), and a laser gun was mounted on the left side of the chest.. The Type C-6 also had a Vulcan gun added to the right side of the chest.. Overall, the Type C-6 has enhanced armor and weaponry and is produced in limited numbers.Various armaments were proposed and developed for the Zaku II, such as the optional parts referred to as the R6 kit. The R6 kits were mainly used by the Type C-5, C-6, and F units, and consisted of two weapons: a 20mm machine gun pod that was mounted on the forearm and 30mm Vulcan guns mounted on the left and right sides of the chest. An "/R6" was added to the model numbers of Zaku II units equipped with one or both of the R6 kit weapons.

The RGC-83 GM Cannon II is a mobile suit introduced in the OVA Mobile Suit Gundam 0083: Stardust Memory. The successor of the RGC-80 GM Cannon, a medium-range support mobile suit developed in the late stage of the One Year War, the RGC-83 GM Cannon II was based on the RX-77D Guncannon Mass Production Type and inherited the Chobam Armor concept of the RX-78NT-1 Gundam NT-1. It was the culmination of the Federation's artillery support mobile suit development.Thanks to improvement in technology and productivity, the GM Cannon II was installed with a powerful generator, allowing it to be equipped with two shoulder-mounted beam cannons. This made it the first mass production unit to have high-powered beam cannons. These beam cannons were usually powered by the generator itself, but could also be powered by the two Energy CAP mounted on its backpack. A sighting device located on the pilot seat's headrest can be used to aim the beam cannons. For precision shooting under gravity, the stabilized gear on the waist could be deployed to stabilize the machine.The GM Cannon II's other weapons included a pair of head-mounted 60mm vulcan guns, a shortened beam saber stored in the left forearm, and the same GM Rifle and shield used by the RGM-79N GM Custom. Due to its role as a fire support mobile suit, the beam saber was only meant for close-quarters self-defense and it rarely had the chance to use it. The GM Cannon II also has relatively poor mobility due to the mass of its weapons and armor.The design of the GM Cannon II's basic components prioritized parts interchangeability with GM type mobile suits. Parts of its exterior was covered in composite armor, similar to the Chobam Armor used by the RX-78NT-1 "Alex". This composite armor improved bullet resistance while keeping the mobile suit's weight down. Unlike the Alex's Chobam Armor, the composite armor was built directly onto the frame and could not be purged when damaged. Despite their structural differences to Alex's armor, the composite armor was often referred to as "Chobam Armor" for convenience.Like the GM Custom, there was a plan to mass produce the GM Cannon II, but due to issues such as cost and the fact that the machine was meant to operate alongside the GM Custom, only a few units were actually deployed. After the Delaz Conflict, the project itself, including its development staff, was placed under the control of the Titans. The GM Cannon II's production was halted and a direct successor to it was never developed.

The MSJ-121 Demi Trainer (デミトレーナー Demitorēnā?) is a mobile suit introduced in Mobile Suit Gundam the Witch from Mercury. Demi Trainers were developed for students of the Asticassia School of Technology, a school created for training personnel in the space development industry. The unit's design is stripped of all superfluous components, affording it superb maneuverability and serviceability. The MS can be modified by anyone with basic technical knowledge, giving it excellent potential for customization. In addition to these facets, Demi Trainers are said to be the best choice for those learning to pilot, making them an obvious choice for students at the school. If asked which MS they felt most comfortable with, students are most likely to answer, "Demi Trainer".