Weekly Sales

Miorine Rembran (ミオリネ・レンブラン Miorine Renburan?), is the deuteragonist of Mobile Suit Gundam the Witch from Mercury. She is the President of GUND-ARM Inc. and the daughter of the Benerit Group's President, Delling Rembran. She is enrolled at the Asticassia School of Technology, of which her father chairs, and is an academically distinguished second-year student in the management strategy department.. Unlike other students, she has no house and lives in her father's old office at the school.

The STTS-909 Rising Freedom Gundam is a mobile suit introduced in the animated film Mobile Suit Gundam SEED Freedom. Using all previous operational data from the ZGMF-X20A Strike Freedom Gundam, the unit was designed incorporating transformation technology acquired by Orb through the MVF-M11C Murasame. Also, its weapons are developed and manufactured from PLANT, and latest technologies from various countries and organizations are used to develop this unit. It shares a frame with the STTS-808 Immortal Justice Gundam, as well as containing the same panoramic monitor cockpit and operating system. This state-of-the-art mobile suit is also remarkable in that it is even more compact in size than previous Freedom variants. Its equipment mainly consists of long-distance combat armament, with Variable Phase Shift (VPS) Armor that can neutralize physical ammunition. With its common frame as a base, equipment may be changed depending on usage needs, making this a multi-role unit capable of utilizing numerous variations. Unlike its predecessors, the Rising Freedom Gundam is battery-powered, necessitating the use of various measures to conserve power for its energy-intensive loadout. A planned upgrade was meant to combat the weaknesses of the Rising Freedom being battery-powered with the MDE262S Proud Defender, which would have greatly increased its combat abilities, but the Proud Defender was not completed in time due to development delays, and after the untimely destruction of the Rising Freedom the planned upgrade was re-adjusted for the secretly renovated ZGMF/A-262B Strike Freedom Gundam Type II.

The PMX-003 The-O is a mobile suit from the series Mobile Suit Zeta Gundam and is piloted by Paptimus Scirocco. The fourth of five mobile suits built by the Newtype Paptimus Scirocco on the Jupitris, the PMX-003 The-O is Scirocco’s personal mobile suit, and perhaps the most powerful. It has an independently developed control system to take advantage of his rare spatial recognition abilities, and its control interface is specifically tuned for Scirocco's use, making The-O impossible to pilot except by Scirocco himself. The generator output specifications are modest at less than 2,000Kw; however, The-O is equipped with a large-scale thermonuclear reactor comparable to that of a warship.The-O has very thick armor that can withstand direct beam hits, such as from the AMX-004 Qubeley's funnels. Although very bulky and heavy, it is outfitted with enough thrusters to maneuver and move at very high speeds, demonstrating powerful thrust similar to mobile armors. It is also extremely agile despite its massive frame, with performance that greatly surpasses common MS and displaying tremendous space combat capabilities. By taking advantage of The-O's large size, it is possible to load large amounts of propellant into various parts of the body and the skirt armor to extend operation time. The leg and armor units incorporate a complex multi-joint structure that allow a high degree of freedom of movement. These parts significantly differ from those found in typical mobile suits.In terms of weapons, The-O is only equipped with four beam swords and a beam rifle. However, thanks to its unique sub-arms, The-O can wield all four swords at once, something that no other mobile suit could do, allowing The-O to excel at close quarters combat. The-O is a robust machine designed with emphasis on mobility instead of excessive firepower, and features an excellent interface that reflects the skill of the pilot.The last special feature of The-O is the Bio-Sensor (no relation to the device installed in the MSZ-006 Zeta Gundam), which functions like a psycommu system and allows Scirocco to more easily interface with his suit.

The RX-79[G]Ez-8 Gundam Ez8 is a customized RX-79[G] Gundam Ground Type introduced in the OVA Mobile Suit Gundam: The 08th MS Team and is piloted by the main protagonist Shiro Amada. During the battle with the Apsaras II, Shiro Amada's Gundam Ground Type was heavily damaged, necessitating major repair and overhaul. Based on the combat data collected up until that point, as well as feedback from Shiro Amada himself, the Gundam received various modifications. The result became known as Gundam Ez8, short for "Extra-zero-8", which stood for "08th MS Team extra unit".The Ez8's chest armor received major changes. Its chest armor plating was made using two Zaku II shoulder shields welded together, which can flip open for easy maintenance and can withstand a direct hit from a Zaku II's 175mm Recoilless Rifle with only a few scratches. The multi-launcher and the chest-mounted vulcan gun were removed due to being considered unnecessary. Instead, a 12.7mm vulcan gun was mounted just below the chest armor.Due to high damage rates in the jungle, the Gundam's signature V-fin was replaced with a rod antenna mounted on the right side of the head. The snorkel camera was removed, and a pair of 35mm vulcan guns were mounted on either side of the head. Due to the lack of Luna Titanium armor material, extra armor was added to the forehead and around the chin for protection. Other changes include the addition of movable knee spikes, which ensure stability during firing, and an improved shield fitted with extra armor. Due to improved power balance, its backpack thrusters had a higher output despite being visually identical.Overall, as a result of the various modifications, the Ez8 was made lighter without significantly sacrificing durability. Though its basic performance was unchanged from the Gundam Ground Type, it was slightly superior in terms of mobility and communications ability.

The GN-0000/7S 00 Gundam Seven Sword (aka 00 Gundam Seven Sword, 00 Seven Sword), is a weapons pack/equipment variation for the GN-0000 00 Gundam that appeares in the Mobile Suit Gundam 00V side story. It is later given a additional weapon and re-designated as GN-0000GNHW/7SG 00 Gundam Seven Sword/G. With Celestial Being (CB) rebuilding their organization after their defeat in A.D. 2308, they began development of the 3.5 and 4th generation Gundams. The lone 4th generation Gundam, the GN-0000 00 Gundam, had undergone continuous beta testing of its experimental Twin Drive System by members of CB's engineering team and Tieria Erde. The original 00 Gundam was made as a close combat mobile suit, normally equipped with its GN Sword II. However, CB soon realized that the 00's basic arms would not be enough to counter the rapidly advancing mobile suits developed by the Earth Sphere Federation. Taking inspiration from the GN-001 Gundam Exia's diverse Seven Sword System, CB engineers created the Seven Sword package for the 00 Gundam, improving the units effectiveness in close combat while also attempting to stabilize the Twin Drive System.The original Seven Sword System was designed specifically for the Gundam Exia. Armed with one GN Sword, two GN Blades, two GN Beam Sabers and two GN Beam Daggers, the package was meant bring out the full close combat fighting strength of the Exia. Coupled with the close combat fighting style of its Gundam Meister Setsuna F. Seiei, Exia served its role as the close combat Gundam prior to is disappearance after A.D. 2308. Seeking to do the same with the 00 Gundam, CB engineers incorporated a mix of technologies into the 00 Gundam's Seven Sword armament. Befitting its name, the 00 Gundam Seven Sword was armed with 7 close combat weapons; the experimental GN Katars, the standardized GN Beam Sabers, the long and short GN Sword IIs, and the large GN Buster Sword.The 00's GN Beam Sabers were significantly improved from the Exia's. Originally, Exia had a set of four beam blades, a pair of daggers and a pair of normal beam sabers. While they were helpful in a few situations, the sabers' lengths were non-adjustable for differing combat situations. With that in mind, CB engineers created the beam sabers to be adjustable in length, increasing their overall efficiency in combat.The GN Katars are mounted on the sides of the 00 Seven Sword's kneecaps, which must be exchanged with the standard white kneecaps to properly holster the weapons. The design is taken from the famous Indian weapon, as well as the 00's GN Shields. The GN Katars are meant as push daggers for stabbing into an enemy. To enhance their capabilities, CB engineers equipped the katars with GN Particle infused blade edges, consisting of the material used in GN Condensers. While attacking, the particles surrounding the katar are converted to heat, and the heat is transferred to the object the katar comes into contact with. However, the heat generated by the particles can be too much for the katars themselves to tolerate. The experimental weapons inspired a line of other condenser infused weaponry for the next generation of Gundams.Taking a design cue from the Exia's GN Blades, CB engineers created the GN Sword II Long and GN Sword II Short. While both swords are physical exaggerations of the aforementioned blades, they vastly differ in function. The GN Sword II is more of a traditional broadsword, able to switch between rifle and sword mode faster than the original Exia could. The long GN Sword II focuses on ranged combat, the only such weapon in the 00 Seven Sword arsenal to do so. The drawbacks are that the long sword uses more particles and a decreased rapid fire capability. In contrast, the GN Sword II short was developed analogous to the GN Short Blade from the Exia. The shortest sword in the Seven Sword armament, the Short Sword's blade tip is attached to a wire, which can be shot out towards an enemy and retracted quickly. Despite these armaments, the signature weapon of the Seven Sword arsenal is the GN Buster Sword.At nearly the same height as the 00 Gundam, the GN Buster Sword is a massive weapon which serves multiple purposes. CB engineer Ian Vashti analyzed the Buster Sword of a GNX-607T/AC GN-XII Sword captured by Fon Spaak in the sword's development. Normally stored on the left GN Drive mount, the GN Buster Sword can expand its frame to particle vents to create a massive GN Field. The scope of the field is so large that it can protect allied suits. When the sword is actively wielded, it is a top class melee weapon. Though the array of weapons were tailored to suit the fighting style of Setsuna F. Seiei, the Meister as well as his Gundam, had been missing during the Seven Swords' development. On top of that, the pack did not stabilize the highly unstable Twin Drive System, and a separate support unit, the GNR-010 0 Raiser, was given a higher priority than the Seven Swords. However, CB hadn't forgotten about the Seven Swords configuration.After the battle with the Innovators, the 00 Gundam had taken some damage, but the greater concern was the fact that its GN Drives were critically damaged in the duel between the GN-000 0 Gundam and the GN-001REII Gundam Exia Repair II. With the 5th generation Gundams in construction, CB developed a modified version of the 00 Gundam Seven Sword, the GN-0000GNHW/7SG 00 Gundam Seven Sword/G as a test-bed for future weapons and systems.

The GN-001 Gundam Exia (aka Exia, Gundam Seven Swords) is a mobile suit featured in season one of Mobile Suit Gundam 00 and is piloted by Setsuna F. Seiei. Specializing in close combat and armed mainly with melee weapons, the Gundam Exia is one of four Gundams deployed in AD 2307 by the paramilitary organization, Celestial Being, to eliminate world conflicts through armed interventions. To fight against the world with their small numbers and win, these Gundams have overwhelming power and equipped with advanced technology a century ahead of its time. Notably, the semi-perpetual GN Drive mounted in the center of the Gundams provide almost limitless energy and generates special, multifunctional GN Particles. The GN Particles grant outstanding mobility, including independent flight capabilities, and are also utilized for beam weaponry, attitude control, and stealth purposes as the discharged particles can cause electromagnetic interference, leaving conventional communication and radar devices useless. The Gundams also share common aspects with conventional mobile suits, such as the use of E-Carbon for its armor material. However, the Gundams' E-Carbon has higher defensive power due to the use of advanced materials.An example of Exia's overwhelming power is that its output was estimated to be about six times that of the SVMS-01 Union Flag, one of the newest conventional mobile suits at the time. The technical hurdles that had to be overcome to create the powerful Gundams and their GN Drives were high, making their production extremely difficult and caused the Gundams' development to occur in phases. The first generation machine, the GN-000 0 Gundam, established the basic system of a mobile suit powered by a GN Drive, and armed with a beam gun and beam saber. Subsequently, four second generation machines were developed with individual capabilities required for armed intervention, and their data served as a basis for the third generation machines, which included Exia and the other three Gundams deployed in the armed interventions. Specifically, Exia was developed from the GNY-001 Gundam Astraea, a general-purpose mobile suit with human-like movability that was used for testing various weapons, and the two machines have a number of similarities in terms of appearance.The Astraea's movability aspect is particularly appropriate for the Exia, which requires the same range of articulations as the human body due to its close combat specialization. Thus, while the Exia is armed mainly with melee weapons, its basic performance remains that of a general-purpose mobile suit. In fact, Exia is the only Gundam deployed for the armed intervention that has a body structure capable of range of articulations like the human body's, and the omission of such a structure in the other three Gundams is simply because they do not require it as their specialization is in other areas. To achieve its wide range of articulations, Exia has the most complex basic frame out of the four Gundams, its armor is also more minutely segmentalized as well. This armor design however causes some internal structures and the joints to be unprotected during certain poses, lowering Exia's defensive capability. On the other hand, this design does provides better mobility, giving Exia the best projectile evasion capability among the four Gundams.The Exia also has finer attitude control capabilities than the other Gundams, which is beneficial for close combat, and this is related to its GN Cables. The GN Cables, also known as “GN Power Lines”, are the light purple-colored cables running through various parts of the Exia's body and also one of its eye-catching visual features. While these cables are also found on other Gundams, the ones extending from the shoulders to the upper arms are unique to Exia. The cables facilitate the supply of tremendous amount of GN Particles, and thus energy, to each part of the Gundam instantaneously. They are also used for attitude control due to the GN Particles' mass reduction effect, and so, the Exia which has more cables on its exterior than the other Gundams is able to achieve finer control. In terms of defense however, such placements are dangerous, and later in GN-001REII Gundam Exia Repair II, the cables become mostly stowed in the armor.The GN Particles' mass reduction effect also lightens the Gundam, and can be used to alter the mass ratio of various body parts. Due to this latter ability, it is possible to freely control the machine's inertia and turning capabilities when in the air, and for Active Mass Balance Auto-Control (AMBAC) when in space. This also eliminates the need for the legs to "walk” when moving. As for the control of GN Particles, it is largely carried out by the two clavicle antennas on the Gundam's torso. A minor role is played by the third generation Gundams' head antenna, which is experimentally equipped with particle control functions. The head antenna also has communications and radar search functions, as well as the black box for quantum communication linkage with Veda (the Celestial Being's quantum computing system). The rest of the Gundams' humanoid head unit also contain systems responsible for controlling the entire body, much like a human's head. On a side note, the Exia's head is designed to look like the helmet of the pilot suit worn by the Gundam Meisters in AD 2307-2308 to express the belief of “Meister = Gundam”.While the GN Drive can produce GN Particles endlessly, even when the Gundams are inactive, there is a limit to the amount that could be instantaneously produced. Thus, continuous or heavy usage of beam weapons and other GN Particles consuming systems might cause the Gundams to run out of particles. To avoid this, the Gundams have GN Condensers in various body parts to store excess GN Particles. For maintenance purposes, the condensers can display the particles' compression rate and the amount stored. During mission, this display function is used for transmitting coded messages to allied units. On the matter of GN Drives, Celestial Being only created five units as that was deemed to be the minimum needed for armed interventions. The low number is not only due to difficulties in manufacturing the GN Drive, which requires Jupiter's high gravity environment, but also because having more GN Drives would increase the risk of them falling into the enemy's hands.The Gundam Exia is nicknamed “Gundam Seven Swords” as its development code was “Seven Swords”, and as indicated by this name, it is equipped with a total of seven blades to meet the needs of the moment during combat. Of these seven, the GN Sword, GN Long Blade, GN Short Blade are physical blades, while the rest are beam-based and consisted of two GN Beam Sabers and two GN Beam Daggers. The GN Sword serves as the primary weapon and due to its low energy consumption, the Exia has an advantage in prolonged combat, which mainly occurs when fighting ace pilots or when subjected to traps such as the three major bloc's joint military exercise. The three physical blades also serve as countermeasures against GN Field, a protective barrier made of GN Particles. In other words, Exia is also intended to fight against Gundam/GN Drive-equipped machine that is piloted by a betrayer or captured by the enemy and used against Celestial Being. Early on, an alternate configuration of the GN-005 Gundam Virtue also had an anti-betrayer role, but its design was dropped and this increased the responsibilities placed on Exia and its Gundam Meister.Other armaments include a GN Shield for defense that also provides protection to the internal structures and joints that might be exposed during movements. The GN Shield is usually in a compact size to maintain Exia's range of articulations, but can expand to increase the defensive area when needed. Similarly, the GN Sword, can fold its blade and has a Rifle Mode for ranged combat. The last of Exia's armament is another ranged weapon in the form of a pair of low-power GN Vulcans mounted in the forearms. During battles, the Exia gloriously sliced through its opponents in close combat, leaving a powerful impression on those who witnessed it and contributing greatly to the instillment of a "fear of Gundams" in the world. This was already anticipated by Celestial Being, and it is because of this that the organization's tactical forecaster, Sumeragi Lee Noriega, selected the Exia to intervene in the AEU-09 AEU Enact's presentation ceremony, which became the unveiling of the paramilitary organization.The Gundam Exia has an "Over Boost Mode" that temporarily boosts its GN Drive's performance and thus increase the mobile suit's capabilities. During an emergency, the Exia can activate a special "Trans-Am System" that enhances its thrust and defensive capabilities, as well as increase its output to three times that of its normal specifications for a limited period of time. This system also causes the Gundam to glow red, but it is a double-edged sword as Exia's performance will drop dramatically once it ends. A number of additional optional equipment was also developed for Exia, such as the high mobility Avalanche Unit and the GNR-001E GN Arms Type-E support machine. When equipped with the Avalanche Unit, the Exia becomes the GN-001/hs-A01 Gundam Avalanche Exia and can speed past specialized high-speed mobile suits, which it normally cannot do despite having remarkable mobility. When docked with the GN Arms Type-E, the Exia becomes the GN-001+GNR-001E GN Armor Type-E, obtaining better mobility, offensive and defensive capabilities.

The RGM-79SP GM Sniper II (ジム・スナイパーII Jimu sunaipā II?) is a variant of the RGM-79G GM Command and first appeared in Mobile Suit Gundam 0080: War in the Pocket. Based on the GM Command series and the concept of the RGM-79SC GM Sniper Custom deployed earlier in the war, the GM Sniper II is a high-performance machine capable of using specialized weaponry at maximum capacity for ultra-long range engagements. It was the last and most advanced of the Federation's line of GM Sniper mobile suits during the One Year War. It was also one of the last GM-type units to be developed during the war.The GM Sniper II's specialized head visor has built-in compound sensors with specialized laser sensors, powerful zoom cameras and image stabilizers for precision, long range targeting. During operation, goggles cover the main camera and other elements of the head sensor array, and together with head unit coolers, they physically eliminate noise interference and enhance long range sniping capabilities. The suit is one of the few capable of accurately firing MS sized sniper rifles that used physical projectiles. Unlike beam weapons, these rifles are not affected by magnetic forces or solar winds, but only a few were made.Operationally, the GM Sniper II was used to eliminate priority targets such as base ships and command machines from beyond the range of conventional weapons. However, the suit is not just a long-range specialist. Like the highly regarded GM Sniper Custom deployed earlier, the GM Sniper II maintains versatility while having enhanced performance. It has sufficient specifications for mid-range support and close combat, and can use almost any existing MS armament. In terms of overall performance, it was one of the few machines to match the RX-78-2 Gundam, which was the standard against which other Federation suits were held to. In fact, its specifications on paper were superior to the Gundam's, and it was one of the few Federation production suits that could take on the MS-14A Gelgoog in a one-on-one fight.The armor of the GM Sniper II is reinforced with pieces of Luna Titanium alloy, and mobility is improved via sub-thrusters in various locations and a total of six large vernier thrusters – two in the backpack and four on the legs. The four large vernier thrusters in the legs have high output to make up for the shortfall in the output of the backpack thrusters, which are designed for precision, and boasts superb pitching performance (rapid up and down movements). The suit's main verniers are built along the machine's core axis, an arrangement also used in later MS such as the MSA-003 Nemo and RGM-89 Jegan. This is an effective way to boost mobility while maintaining the same basic silhouette. The suit's torso is an upgraded version of the GM Command's, and has superior specifications with additional waste heat and electrical noise suppression material. Its arms are constructed with the same parts used in other GM models, but with highly tuned servos and actuators and an updated driver.Only very few GM Sniper II were manufactured due to it being developed late in the war. Production costs were also undeniably higher than standard mass-produced machines, and apart from a few prototypes built for test purposes, the suit did not have any follow up models. The GM Sniper II was however used as the basis for the RX-80, a mobile suit that became the base unit for the Project Pale Rider. It is believed that the GM Sniper II's development team later worked on the Nemo, but this is unconfirmed. Due to the GM Sniper II's excellent performance and shooting capabilities, it continued to be used for sniping missions long after the war ended. Units deployed by the Titans have a dark blue color scheme and updated features such as a new optical camera system for long-range shooting and improved sensor radius.

The RX-9/C Narrative Gundam C-Packs is a mobile suit introduced in Mobile Suit Gundam Narrative and is piloted by Jona Basta. The C-Packs was the third optional equipment for the RX-9 Narrative Gundam and is embellished with Psycho-Frame as additional armor. It is said that no such equipment plan originally existed for the MS, resulting in minimal conversions being hastily applied to the MS. Despite its unusual origin, the MS did achieve its concept to have an increased amount of Psycho-Frame, proving the high extensibility of the Narrative Gundam. This configuration of the MS is also called the "Psycho Package" and the Psycho-Frame used to create it was independently collected by Luio & Co.