Gundam Gunpla

The GN-0000 00 Gundam (aka 00 Gundam, 00 (pronounced "Double-Oh")) is the titular mobile suit of Mobile Suit Gundam 00. It is the successor of the GN-001 Gundam Exia and is piloted by Setsuna F. Seiei. The GN-0000 00 Gundam was one of the new Gundams developed by Celestial Being after the paramilitary organization was defeated by the UN Forces in AD 2308. It was made specifically for Setsuna F. Seiei, thus it was designed based on his previous mobile suit, the GN-001 Gundam Exia, and reflected Exia’s performance data. Although Setsuna's whereabouts were unknown at the time of the 00's development, his Celestial Being comrades continued developing the mobile suit as they believed he would return. Deployed in AD 2312 following Setsuna's return and as Celestial Being made a comeback after four years of silence, the 00's most prominent feature is the Twin Drive System that utilized two original GN Drives. By synchronizing the two GN Drives, the Twin Drive System causes the resulting GN Particle output to be squared that of a single GN Drive rather than merely doubled. With this immense amount of GN Particles, the 00 was expected to have exceptional combat capabilities. The theory behind the Twin Drive System was developed by the founder of Celestial Being, Aeolia Schenberg, and hidden in the quantum processing system Veda. This theory was eventually sent to Celestial Being at the same time as the Trans-Am System.The 00 was the first mobile suit to incorporate the Twin Drive System. Unfortunately, synchronization of the two GN Drives was extremely difficult, and this made achieving stable operation of the system elusive. Even with the use of GN Drives from the Exia and the GN-000 0 Gundam, a combination which had the highest synchronization rate among the five GN Drives that existed at that point of time, the system failed to reach the stable operational range. In the end, Setsuna used the Trans-Am System briefly to forcibly pushed the Twin Drive System into the stable operational range. This was a dangerous method however, as it could cause the GN Drives to overload and even explode. Although the Twin Drive System was successfully activated, the 00 was still incapable of stabilizing the system by itself, as demonstrated when both of its GN Drives overloaded during the battle with the GNX-704T/AC Ahead Sakigake due to use of the Trans-Am System. These problems were later solved by combining 00 with a dedicated support machine, the GNR-010 0 Raiser, forming the GN-0000+GNR-010 00 Raiser. Through this combination, the 0 Raiser's particle control equipment was able to control and stabilize the 00's Twin Drive System, and the Trans-Am System could also be utilized safely.Located off the shoulders, the pair of GN Drives were mounted separately on two drive bases that were connected to the 00's backpack through a pair of drive arms. The drive bases could rotate to the front and back of the mobile suit, enabling the GN Drives to change freely from their standard side-facing position to other positions. This granted the 00 superior mobility as the GN Drives were covered with a thruster cone that enabled them to function as the mobile suit's main thrusters by emitting GN Particles to generate thrust. Furthermore, when the GN Drives faced the front, the emitted particles could be used to generate a GN Field for defense. The placement of 00's GN Drives was based on the operational data of the GN-XXX Gundam Rasiel, which had high mobility thanks to its shoulder-mounted GN Verniers. Due to the miniaturization of devices such as stabilizers that control the GN Drives' core units, the 00's GN Drives are smaller compared to those of the Exia and the other 3rd generation Gundams. As for the GN Drives' thruster cone, it was based on that of the 3rd generation Gundams' and incorporated functionalities of the three-thrusters type GN Drive cover used by the 2nd generation Gundams, such as the GNY-001 Gundam Astraea. Besides the GN Drives, the 00's backpack could also generate thrust using GN Particles due to a pair of built-in thrusters.The Gundams were equipped with special antennas called "Clavicle Antennas" to control their GN Particles, and 00 was no exception, but it adopted a miniaturized version installed in the forehead as a pair of yellow antennas. Previously, the clavicle antennas were mounted on a Gundam's torso, but their position was changed in the 00 to avoid functional interference with the movements of the mobile suit's GN Drives. Additionally, 00 had an extra pair of chest-mounted antennas to support the functions of the forehead's clavicle antennas. As with the other Gundams, GN Condensers were installed throughout the 00's body to store excess GN Particles generated by its GN Drives, enabling the mobile suit to consume a large amount of particles instantaneously when required. However, the 00 utilized newly designed, high performance GN Condensers as the amount of particles generated by the Twin Drive System is of a different magnitude. Like previous GN Condensers, these new GN Condensers could also display various information and data, such as the amount of particles stored. The GN Particles are transmitted to various parts of a Gundam's body using special GN Cables, and while these cables were exposed in earlier Gundams, they have been internalized in the 00.While the 00 was developed as a general-purpose machine, its armaments emphasized melee combat, like its predecessor, the Exia. Its main armament, a pair of GN Sword IIs, were developed from Exia's GN Sword. The GN Sword II has three different modes: Sword, Beam Saber, and Rifle, allowing the 00 to fight flexibly without switching weapons. The other armaments are a pair of GN Beam Sabers that doubled as GN Beam Daggers, and a pair of GN Shields that could combine into a large shield and are also usable as striking weapons. An enhancement plan called the GN-0000/7S 00 Gundam Seven Sword would equip the 00 with seven blades, and this is an evolved version of the "Seven Swords" used by Exia. Other variants of the 00 are the GN-0000+GNR-010/XN 00 XN Raiser, where the mobile suit combines with an enhanced form of the 0 Raiser, and the GN-0000/XN XN 00 Gundam, where the 0 Raiser's enhancement parts are fitted onto the 00 itself. The 00 was heavily damaged during the final battle with the Innovators and lost both GN Drives. It was eventually repaired, with a pair of improved large GN Condensers mounted in place of the GN Drives. The repaired 00 retained the Twin Drive System and could even use the Trans-Am System for an extremely short period of time.

The XXXG-01D2 Gundam Deathscythe Hell (aka Deathscythe Hell, or Gundam Zero-Two) is the upgraded version of XXXG-01D Gundam Deathscythe in Mobile Suit Gundam Wing. It is piloted by Duo Maxwell. An updated version of the XXXG-01D Gundam Deathscythe that was destroyed by OZ, the Deathscythe Hell is better adapted for space combat. Like its predecessor, the Deathscythe Hell specializes in stealth and close combat. The new active cloak mounted on the shoulders improve the suit's defense when closed, and can withstand multiple beam cannon shots from OZ's OZ-02MD Virgo. Furthermore, it also allows the suit to become invisible. When opened, the active cloak enhances the Gundam's mobility. One of Duo Maxwell's favorite strategies is to use the Gundam's enhanced hyper jammers and its invisibility to sneak close to enemy units and catch them unawares. This tactic is usually good for taking out at least one or two enemy units, after which Duo will uncloak the Gundam.Deathscythe Hell's primary weapon is a Twin Beam Scythe, an upgraded version of its predecessor's Beam Scythe, and it is equipped with a second beam scythe blade and a small rocket engine on the end, giving it a greater reach and power. The Deathscythe Hell's secondary weapon is a Buster Shield on the left forearm which can be deployed as a projectile weapon. Like the original Deathscythe's, this buster shield can also emit a beam blade. Lastly, the Deathscythe Hell retained the Deathscythe's head-mounted vulcan guns, but the clavicle-mounted machine guns were removed.

The ASW-G-08 Gundam Barbatos is the main mobile suit in the first season of the Mobile Suit Gundam IRON-BLOODED ORPHANS anime and is piloted by Mikazuki Augus. The ASW-G-08 Gundam Barbatos is one of 72 "Gundam" frames that was produced and used in the Calamity War, roughly 300 years ago. After it was recovered, Chryse Guard Security used it as a power reactor. Aside from the fact that its Ahab Reactors were still functional, this was done mainly because Barbatos' cockpit was missing when it was found. A new cockpit similar to the one used by the CGS mobile workers was installed prior to its redeployment by the 3rd Group. Poor maintenance over the centuries since the Calamity War has degraded the Barbatos' armor and full combat potential. This is later rectified by Teiwaz technicians, who not only restored the Barbatos to its original look but also returned it back to a performance close to its original.Gundam units like the Barbatos are able to achieve a high energy output because they possess two Ahab Reactors. However because it is difficult to run them in parallel operation, only a total of 72 Gundam frames were ever produced. The burden experienced by the pilot is high as a result of the high output and maneuverability; however it's mitigated by the implementation of inertial control due to the use of Ahab Particles generated from the reactor when a phase transition occurs inside its vacuum device. The cockpit structure is positioned in front of the reactor to take advantage of this. Among the same frame machines, the Gundam Barbatos has been adjusted for an emphasis on versatility, it has the potential to adapt to every circumstances by exchanging its equipment. It can also use weapons and armor from defeated enemies to improve its fighting capabilities.

The MSN-06S Sinanju (aka Sinanju) is a mobile suit featured in the Mobile Suit Gundam Unicorn novel, its OVA adaptation and the television re-cut. A modified version of the MSN-06S Sinanju Stein, it was piloted by Full Frontal. Originally the MSN-06S Sinanju Stein developed by Anaheim Electronics as part of the Earth Federation's "UC Project", its movable frame is partly made from Psycho-Frame materials. This mobile suit was then stolen and modified into the MSN-06S Sinanju by the Neo Zeon remnant group known as "The Sleeves", and became the personal machine of the group's leader, Full Frontal.All of the Gundam-like features (except for the head-mounted vulcan guns) in the Sinanju Stein have been replaced with a Zeonic design and weaponry. Painted in crimson and with gold engraving, the Sinanju looks like the emblem of the Neo Zeon forces embodied. This decoration not only strengthens the armor, but is also said to be a design that is meant to control the organization known as the Neo Zeon remnants. The Sinanju Stein was an experimental machine, so there were some concerns about the armor's resistance to elasticity, but in order to increase the pilot's survival, the beam coating was strengthened from the two-layer structure used in most conventional MS to a five-layer structure, and the entire cockpit block was covered with Luna Titanium X material, and the Sinanju's armor has been strengthened as flagship machine.The Sinanju is also equipped with thrust deflector thrusters shaped like the large wings of a bird of prey, and flexible thrusters on the left and right sides of both legs and shins. Together with the numerous thrusters located all over its body, it is capable of acrobatic maneuvering combat that is impossible for a normal MS to achieve. With its overwhelming combat ability, crimson body, and mono-eye sensor, the Sinanju reminds all who see it of the legendary "Red Comet".

Liu Bei Unicorn Gundam- He is a member of "Dragon's Watch," a vigilante group in the Shu Area, which is not targeted by Etiolation Trinity virus. After meeting Guan Yu Nu Gundam and Zhang Fei God Gundam, he makes an important decision: To save the world. He eventually starts to gain comrades who are drawn to his strong passion.

The ASW-G-01 Gundam Bael (ガンダムバエル Gandamu Baeru?) is a mobile suit introduced in the second season of Mobile Suit Gundam IRON-BLOODED ORPHANS anime. It was originally piloted by Agnika Kaieru, and more than 300 years later by McGillis Fareed. During the Calamity War, a quarter of the human population was lost due to the extensive fighting against the mobile armors, which had been developed for the efficient extermination of human beings. To stop these mobile armors, the Alaya-Vijnana System, which establishes compatibility between a person and a machine, was employed. During this process, 72 Gundam Frames were produced, and they came to be perceived as special due to the outstanding military achievement of Agnika Kaieru, who piloted the first Gundam Frame, the Gundam Bael.Compared to subsequent Gundam Frames, the Gundam Bael is a relatively standard unit with little special features. However, it was a key mobile suit in ending the war and became a figurehead of the Gjallarhorn. Thus, Agnika and Gundam Bael were idolized during those times. Gundam Bael's main armaments consisted only of two swords, and this was proof that Agnika was fully compatible with the mobile suit via the Alaya-Vijnana System. For Agnika, who realized superhuman reactions, no other armament was better than these unbreakable swords. Agnika passed away as the Gundam Bael went to sleep, and it was believed his soul resided within the Gundam Bael.The Gundam Bael was stored in the Gjallarhorn's headquarters, Vingolf, until it was awakened by McGillis Fareed. The mobile suit remained unchanged during its long slumber, so its frame structure, as well as its armaments, are as they were when Agnika was the pilot. The emblem on its left shoulder is a symbol of the Gjallarhorn at the time of the organization's formation.

The ASW-G-66 Gundam Kimaris Vidar is a mobile suit introduced in the second season of the anime Mobile Suit Gundam IRON-BLOODED ORPHANS. It is piloted by Gaelio Bauduin. After Vidar removed his mask and revealed himself to be Gaelio Bauduin, the Gundam Vidar was retrofitted into the Gundam Kimaris Vidar, reclaiming the name Kimaris. This conversion was conducted quickly as it was planned from the beginning. The Gundam Vidar's Alaya-Vijnana Type E was retained, but the third Ahab Reactor was purged as it only served to hide the suit's true identity, which is no longer needed. The Gundam Kimaris Vidar is meant for the decisive battle against McGillis Fareed and his Gundam Bael. This variation of the Kimaris has existed since the Calamity War era.The Gundam Kimaris Vidar's equipment is the same as those used in the Calamity War era, and meant to give it an advantage in zero-gravity combat, making it the polar opposite of the Gundam Kimaris Trooper, whose equipment is meant for ground combat. Besides having a drill lance and a sword as its main weapons, Kimaris Vidar is also armed with a pair of drill knee and two shields. With its variety of weapons, the suit has the potential to be used in any range, and is considered to have a high level of completion amongst the Kimaris’ variations. Like the Gundam Kimaris and Gundam Kimaris Trooper, the Gundam Kimaris Vidar's primary battle style involves hit-and-run attacks with its lance.

The MSZ-010 ΖΖ Gundam (aka ΖΖ Gundam, ZZ; pronounced "Double Zeta") is the titular mobile suit of the anime Mobile Suit Gundam ZZ and is piloted by Judau Ashta. A direct development of the MSZ-006 Zeta Gundam, the ΖΖ Gundam, which had been completed through a prototype, was given the development code "θ" (thus also known as the "θ Gundam") as it was the sixth "Anaheim Gundam" after the RMS-099 Rick Dias (also known as “γ Gundam”). The development plan of the ΖΖ Gundam existed two years before the completion of the Zeta Gundam but was shelved due to internal competition and production delays. However, the performance advantage of the Zeta Gundam against new Titans mobile suits did not last long, and so development of the ΖΖ Gundam was resumed.The ΖΖ Gundam sought to reproduce the operating functions of the RX-78-2 Gundam and the G-Armor in a single machine. An advanced form of the RX-78-2 Gundam's Core Block System was also introduced. As a result, the ΖΖ Gundam can transform into a mobile armor form called the G-Fortress, which acts as a heavy combat bomber and for cruising in space and on earth. The ΖΖ Gundam can also separate into two independent fighter units, called the Core Top and Core Base. The Core Base, consisting of the ΖΖ's lower body and backpack, is operated through the FXA-07GB Neo Core Fighter attached to its front. The Core Top, consisting of the ΖΖ's upper body and double beam rifle, is operated through the cockpit in its nose unit or more frequently through the Neo Core Fighter, which is in its Core Block form, attached to the lower rear.The team on board the "Argama" typically operates the ΖΖ Gundam with a third Neo Core Fighter piloted by the Gundam's main pilot, Judau Ashta. When combining into the ΖΖ Gundam, forming the G-Fortress mode is the first step and consists of the Core Top and Core Base ejecting their Neo Core Fighters to dock with Judau's Neo Core Fighter in Core Block form. When transforming from the G-Fortress mode to MS mode, the large verniers in the arms and legs are retracted. However, this does not reduce total thrust as the surplus output is supplied to the attitude control thrusters distributed throughout the body and the number of operable thrusters are actually increased. Other parts that move during transformation include the flexible wing binders that also serve as arm-mounted wings shields, the shoulder thruster binders, the large backpack, etc.The engine installed in the backpack is originally meant for ships and could supply power for an entire ship. It also functions as the main thruster unit of the ΖΖ Gundam when in MS form, generating thrust equivalent to that of a large ship. The ΖΖ Gundam's armor is a multi-spaced structure composed of Gundarium γ alloy, capable of withstanding a mobile suit explosion at close range and resisting high water pressure. While it is impossible to completely defend against a direct hit of a mega particle beam, the wings shields are strong enough to prevent a direct hit on the cockpit.With its overall height limited to around 20 meters as requested by AEUG to maintain mobility, the ΖΖ Gundam's design also incorporated the movable frame and magnet coating technology. The generator output which had caused problems during early stages of ΖΖ's development was resolved by incorporating three compact, high-output generators. The movable modules and armor parts, which have a multi-layered structure, are connected by hinges and slide rails which have magnet coating, making them flexible and robust while allowing instantaneous transformation of the ΖΖ Gundam. However, the complexity of the system resulted in poor maintainability and productivity also deteriorated.The control system of the ΖΖ Gundam is equipped with a Bio-Sensor, which is a simplified Psycommu system, as an interface for Newtype pilots. An improved version of the Biosensor installed in the Zeta Gundam, it improves the responsiveness of the mobile suit by supporting the control system with the pilot's brainwaves. However, as a protective measure, the Biosensor is inactive when a pilot with low Newtype abilities boards the ΖΖ Gundam. The unit is mounted in the ΖΖ Gundam's Core Block and the synchronization of the device is improved by inputting the brainwave patterns of the Neo Core Fighter's pilot.The ΖΖ Gundam has a number of powerful weaponry, including two hyper beam sabers which are also usable as beam cannons, a double beam rifle, a 21-tube missile launcher installed on the backpack, and a high mega cannon on the forehead. While the ΖΖ has a very destructive arsenal, its weapons systems require a high level of energy. As a result, the ΖΖ often found itself almost completely drained of power after using its high mega cannon. The ΖΖ Gundam's structural issues due to its complicated construction and transformation systems were eventually corrected with the MSZ-010S Enhanced ZZ Gundam and its massive final upgrade FA-010S Full Armor ZZ Gundam.

The MSJ-R122 Demi Barding (デミバーディング Demibādingu?) is a mobile suit introduced in Mobile Suit Gundam the Witch from Mercury. A new prototype MS and the latest model developed by Burion as part of the Demi series. The Demi Barding is a concept model used for the purposes of testing and development. Although it has new components designed to meet the latest standards, the general structure of its propulsion unit is identical to the current production models. The unit was built without profitability in mind, and as such has higher than normal specs. However, ease of maintenance and other characteristics of the Demi series was still incorporated into the design.

The EDM-GB Gundvölva (ガンヴォルヴァ?) is a mobile suit-type GUND-BIT from Mobile Suit Gundam the Witch from Mercury .This mobile suit is optional equipment for the Lfrith Ur and Lfrith Thorn, renovated versions of the Gundam Lfrith Pre-Production Model. The Dawn of Fold has likewise used Lfrith as a base for its production. Named the Gundvölva, it lacks what is arguably the most crucial section of a mobile suit - a cockpit block. Instead, it houses components specialized for GUND Format reception functions. The unique construction allows Lfrith Ur and Lfrith Thorn to make use of its next-generation remote-controlled swarm weapon system, said to be one of GUND-ARM's superior features. In other words, the Gundvölva is essentially a GUND-BIT in the shape of a Gundam.

Gan Ning Crossbone Gundam- First appears in Enkotan. The head of staff at the Qiao's manufacturing company.

Tian Ba Cao Cao Wing Gundam- An appearance that embodies Cao Cao's determination after falling victim to Sima Yi's compulsion, facing the decisive battle for the future of Kingdom World. His body, sword and Memory device have all been enhanced.

Twin pack. Includes 5 interchangeable faceplates (Shu, Wei, Wu, Luoyang, and BUG).

Xu Huang Gundam Deathscythe- Appears in Soshoki. One of the bandits that controls a remote region in the Wei Area. He later becomes one of Cao Cao's trusted subordinates.

Sun Shangxiang Strike Rouge- The youngest child of the Sun family. She has an active personality and her athletic ability rivals that of her brothers Sun Ce and Sun Quan.

Zhang Liao Sazabi- First appears in Soshoki. He once formed a team with Lyu Bu, who would take on any task if the money was right. However, after being defeated in battle by Xiahou Dun, he became a sincere believer in Cao Cao's ideals. Deeply impressed by Xiahou Dun's way of life, he pledged allegiance to Cao Cao and became his subordinate. He displayed a talent for business and now helps support Blue Wing. His monoeyed appearance is actually a mask and he has a Gundam face underneath it, likely as a reference to the Moon Gundam.

Zhuge Liang Freedom Gundam- A young scientific prodigy. He was formerly working under a renowned researcher, whose current whereabouts are unknown.

Sun Ce Gundam Astray- Appears in Enkotan. Sun Jian's eldest son.

Xiahou Yuan Tallgeese- Xiahou Dun's younger brother, who has been with Cao Cao since childhood. Like Xiahou Dun, he is deeply trusted by Cao Cao, but he does have a frivolous side.

Xiahou Dun Tallgeese III- Cao Cao's cousin. They have been together since childhood, and having survived countless battlefields together, they share a trust even stronger than blood ties. Compared to his younger brother Xiahou Yuan, his personality has a wild side.