High Grade 1/144 Gundam

The V07-0126 Sigrún (ジークルーネ?) is a mobile suit introduced in the Mobile Suit Gundam IRON-BLOODED ORPHANS MSV[1] and appearing in Mobile Suit Gundam IRON-BLOODED ORPHANS G. The Sigrùn is one of the mobile suits that adopted the Valkyrja Frame developed near the end of the Calamity War over 300 years ago. It was designed under the concept of a high mobility/high output unit that could change the tides of the war, resulting in a high-performance machine. The small but high output thruster units are prominent features of the Sigrún. Close-quarters combat using the Valkyrja Rapier, Sigrún's main melee weapon, is supported by the thruster units mounted on the back and waist. The Sigrún also uses the Valkyrja Round Shield alongside the Valkyrja Rapier, and both weapons as well as the curved design of the mobile suit's armor are reminiscent of knights from the Middle Ages. The Valkyrja Frame was developed to become a symbol of those who wished to win the Calamity War. However, only a few battle records exist of the Sigrún and other Valkyrja Frame units. This was because mobile suits developed around the same time which used the Gundam Frame swept the battlefield, and the war ended before the Valkyrja Frame units were able to play an active role, causing them to fade into obscurity. So few units were manufactured and only a limited number of people know about them. Despite this, Sigrún and the other Valkyrja Frame units were re-evaluated after the war. Gjallarhorn carried out research based on the design concept of the Valkyrja Frame during the development of its mainstay mobile suits.

The ASW-G-29 Gundam Astaroth is a mobile suit introduced in the manga Mobile Suit Gundam IRON-BLOODED ORPHANS Gekko. It is piloted by Argi Mirage. The Gundam Astaroth is one of the 72 "Gundam" Frames produced and used in the Calamity War, roughly 300 years ago. It is also one of 26 remaining Gundam Frames that survived the Calamity War and reported to be operational. The Warren family, a family affiliated with Gjallarhorn, owned the Gundam Astaroth but was forced to sell its armor and equipment when their financial situation went bad, with the suit's Gundam Frame eventually acquired by Tanto Tempo's Daddy Ted.  The Astaroth was then restored to operational condition by fitting its frame with a mix of parts from other mobile suits, and an example of this is that its left forearm armor and left shoulder armor are from a UGY-R38 Spinner Rodi. The two side waist armors are called Boost Armor, which has a wide range of movement and assists in the attitude/posture control of the mobile suit since the Astaroth's asymmetry affected its center of gravity.

The MSK-008 Dijeh (ディジェ Dije?) is a mobile suit introduced in the anime Mobile Suit Zeta Gundam. During the Gryps War, it was piloted by Amuro Ray.

The GNX-603T GN-X (aka GN-X (often pronounced as Jinx)) is a mass production mobile suit used by the United Nations Forces in season 1 of Mobile Suit Gundam 00.

The GNR-101A GN Archer (aka GN Archer, pronounced "Gun Archer") is a transformable support unit for the GN-007 Arios Gundam introduced in Season 2 of Mobile Suit Gundam 00, and is piloted by Soma Peries (Marie Parfacy).

The GN-000 0 Gundam (pronounced Oh-Gundam) is the first GN Drive equipped mobile suit in the Mobile Suit Gundam 00 series. It was piloted by Ribbons Almark and later by Lasse Aeon. The 0 Gundam was a general-purpose mobile suit developed during the Solar Power Wars, 15 – 20 years prior to the revelation of Celestial Being, and was completed around A.D. 2290. The first Gundam created by Celestial Being, it was also known as the first generation machine. Data obtained from it was used in creating the second generation Gundams such as the GNY-001 Gundam Astraea. Unbeknownst to the organization, the 0 Gundam's data was copied by Ribbons Almark and the Corner Family, who later used it to create the Throne series. Although Ribbons was once the 0 Gundam's pilot, he was not its official Gundam Meister as the suit did not switch its rollout color scheme (white, grey and yellow) to a custom one, a standard procedure whenever a Gundam has an official Meister. While the completion of the GN Drive was an important step in the establishment of GN Drive-equipped mobile weapons, it also required the development of ancillary technologies and materials like E-Carbon that is capable of withstanding the machines' high output. No matter how revolutionary a specific part is, it would not be able to demonstrate its full capabilities until surrounding technologies have also developed enough. As such the completion of the 0 Gundam was a triumph as it established the basic concepts and systems for later Gundams. This included the use of the GN Drive as the main engine unit, use of the GN Drive's high output to drive beam weapons, presence of clavicle antennae on the torso for controlling GN Particles, and head-mounted v-fin antenna as well as twin eye camera. Compared to later Gundams, the GN Drive's cone on the 0 Gundam's back was not only of a different design, it was also larger and protruded out more as the drive's ancillary/support systems were yet to be miniaturized. In terms of armaments, the suit has a Beam Saber, Beam Gun, and Gundam Shield for close to mid-range combat. During the Celestial Being's armed intervention in A.D. 2307-2308, the 0 Gundam was with the shadow support organization, Fereshte, who usually took out its GN Drive to power their Gundams. Fereshte eventually merged with the reborn Celestial Being, bringing the 0 Gundam along. The 0 Gundam's GN Drive was then removed and used in powering the GN-0000 00 Gundam, while the suit itself was stored in one of Celestial Being's resource satellites. The 0 Gundam was later pulled out of storage for combat deployment during the final battle with the Innovators. Since there was no GN Drive left to power it, the 0 Gundam was fitted with a large GN Condenser, also known as particle storage tank, that gave it limited operational time. It also had a new color scheme of red, blue and yellow, and was renamed as 'GN-000 0 Gundam (Type A.C.D.)' (Actual Combat Deployment) to differentiate it from its original form. This version uses the same armament as the original's. Later in the battle, the 0 Gundam (Type A.C.D) was abandoned by the backup Gundam Meister Lasse Aeon after its particle reserves were depleted. It was then found by Ribbons, who reactivated the Gundam one last time using a GN Drive he had cut off from the 00 Gundam.

The AMX-107 Bawoo is a transformable mobile suit developed by Neo Zeon during the First Neo Zeon War. It was introduced in the anime Mobile Suit Gundam ZZ. Created by Neo Zeon based on the 'Project Zeta' series of MS, the AMX-107 Bawoo is capable of transforming and separating into the Bawoo Attacker (upper torso) and autonomous Bawoo Nutter (lower torso) units. On Glemy Toto's orange-colored prototype, the left thigh armor is decorated with the archaic kanji 𪚢, which combines the characters for dragon (龍) and flight (飛) and is pronounced "bau" (bawoo) in Japanese. Glemy highly praised the Bawoo Attacker's fluid, effortless mobility, and its potential as an escape unit. The standard armaments of the Bawoo consisted of grenade launchers, beam sabers, beam rifle, and shield with five mega particle cannons. When required, it can also carry three missiles on each flexible wing binders. In U.C. 0096, the Neo Zeon remnants, the Sleeves, deployed modified Bawoo units. Besides a new color scheme and the group's distinctive markings on its arms and chest, the suit also gained a pair of vulcan guns on its torso, a pair of machine cannons in its side skirt armor and uses a beam machine gun as well as a shield without the mega particle cannons. The Bawoo Nutter was reconfigured to have its own cockpit, granting better coordination with the Bawoo Attacker, and allowed the Nutter to continue operating if the Attacker was destroyed. The Nutter could also carry six missiles, bringing the total amount of missiles to twelve.

The GNW-001 Gundam Throne Eins (aka Gundam Throne Eins, Throne Eins, Eins) is the lead mobile suit of Team Trinity and piloted by Johann Trinity in season one of Mobile Suit Gundam 00.

The MSJ-06II-A Tieren Ground Type (aka Tieren Ground Type, Tieren) is a mobile suit introduced in season one of Mobile Suit Gundam 00.

The MBF-P02 Gundam Astray Red Frame is a Mobile Suit introduced in the manga Mobile Suit Gundam SEED Astray. It is piloted by Junk Guild member Lowe Guele. The MBF-P02 Gundam Astray Red Frame is one of five identical prototype mobile suits developed by Orb using stolen data from the Earth Alliance's G Project. Its original concept was to be a MS that could be piloted by Naturals, and it was eventually loaded with an incomplete Natural-use OS. Most of the technology from the G Project is successfully copied with the exception of Phase Shift armor. In its place, the Gundam Astrays' designers made the machines out of a lighter foam metal compound, with minimal armor over the frame. This made the mobile suits lighter and faster than their G Project counterparts. All five prototype Gundam Astrays are also designed with a backpack that can be lowered to the back skirt armor, allowing the mounting of additional equipment on the back. The Red Frame initially had the same armament as the other prototype Gundam Astrays, consisting of two head-mounted "Igelstellung" 75mm multi-barrel CIWS, two backpack-mounted beam sabers for close combat, a Type 71 beam rifle and a physical shield. Red Frame's pilot, Lowe Guele, eventually acquired another armament - the "Gerbera Straight" katana. To wield this katana effectively, the Red Frame's OS was modified. Lowe also created a 150 meter long version of this sword, however it cannot be carried by the Red Frame in its normal configuration. Lowe also designed a set of upgrades for Red Frame, but they are used to repair Gai's damaged MBF-P03 Gundam Astray Blue Frame instead. When there is a need for flight capability, Red Frame can be fitted with the Flight Unit and when it needs to dive underwater, it can use the Salvage Unit. After his return from Mars, Lowe developed the Caletvwlch and the Ddraig Head. The former is a multifunctional handheld equipment, while the latter is a special head unit designed to complement the former. Like other mobile suits that use beam weapons, the Red Frame is equipped with hand plugs to exchange energy with weapons the suit carries. Although considered a misuse of the system, the energy from the hand plug can be manipulated into an energy ball and discharged. This is often used by Lowe as an emergency weapon, for example to temporarily blind enemies. The mysterious organization, Librarian Works, later created a copy of the Red Frame. Known as Replica Red Frame, it has the same capabilities as the real Red Frame.

The XXXG-01L2 Gundam Livelance Heaven (ガンダムリヴランスへブン Gandamu Rivuransu Hebun?) is a Gunpla that appears in the ONA Gundam Breaker Battlogue and the video game Gundam Breaker Mobile. Based primarily on the Gundam Deathscythe Hell, this Gunpla is customized with a design and color palette reminiscent of an angel, the opposite of the original's "God of Death" motif. When deployed the active cloak now resembles a six-winged seraphim.

The XXXG-01S Shenlong Gundam (aka Shenlong, Nataku, or Gundam Zero-Five) is mobile suit introduced in Mobile Suit Gundam Wing and piloted by Chang Wufei.

The GAT-04+AQM/E-A4E1 Jet Windam is a variant of the GAT-04 Windam introduced in the anime Mobile Suit Gundam SEED Destiny. A custom unit is piloted by Neo Roanoke.

The GF13-017NJII God Gundam (aka G Gundam, Burning Gundam in the English dub) is the titular Mobile Fighter of Mobile Fighter G Gundam. It was the second Mobile Fighter used by Neo Japan in the 13th Gundam Fight, and is piloted by Domon Kasshu.

Mrs. Loheng-Rinko from "Gundam Build Fighters" joins the HGBF model kit lineup from Bandai! She's fully posable after assembly and comes with 2 of the Lohengrin, 2 of the Gottfried Mk.71, 2 beam rifles, and a display stand; foil stickers are included for the markings.

The Gundam Perfect Strike Freedom Rouge, as seen in the "Gundam Build Series" 10th anniversary video "Gundam Build Metaverse," gets a new HG model-kit release from Bandai with "Perfect" equipment! The laser anti-ship sword Schwertgeber and the super high-impulse cannon Agni can be separated and combined. Combine them to create the large weapons Super Schwertgeber and Super Agni! The rocket anchor Panzer Eisen can be displayed in ejected mode with a lead wire; the super dragoon attached to the mobile weapon wing can be attached and detached. Various beam effect clear parts are included, too. Order this spectacular Gundam for your own collection today!

The PEN-01M Momokapool (モモカプル Momokapuru?) is a Gunpla introduced in the Gundam Build Divers anime. Based on the AMX-109 Kapool, it is built and piloted by Momo. A Kapool-based Gunpla used by Momo, and assembled by her with advice from Koichi Nanase, but she rejected custom plans that are not cute. The kit's custom style focused not on firepower or mobility, but solely on "Kawaii Power".It has been customized with a cute penguin motif, and contains a mini Kapool, the Petitkapool, making it more adorable. The Kapool's missile launchers have been removed because they weren't so cute, and the unpleasant sharp tips of its iron nails have been rounded off, reducing its attack power. However, its speed and strength/durability have both been greatly improved as a side effect of pursuing ultimate cuteness.Like its base Gunpla, the Momokapool can transform into a cruising form by retracting its arms and lowering its head, but Momo gave it a more literal name, 'Ball Mode', based on its appearance. The Ball Mode boasts improved cruising capabilities, and can be used for dodging as well as other various ways, including using itself as a kinetic weapon as seen with its 'Rolling Attack'. Since the Momokapool is incapable of flight, it needs help from its teammates, such as riding on top of the RX-零 RX-Zeromaru's Armed Armor Hattori, when aerial travel or combat is necessary.Two years later, Momo is seen using a Momokapool with a color scheme of black, white and pink. Although the full details of this Gunpla is unclear, it seems to retain the Ball Mode, the Petitkapool, and has the same inability to fly. It is known to have a weapon called the Hyper Belly Beam and a unique data-gathering feature, the "Penguin Research".

The RGM-79 GM is a mobile suit that appears in the manga Mobile Suit Gundam: The Origin. A mass-produced MS of the Earth Federation Forces manufactured in Jaburo. Unlike the Guncannon, which specialized in medium-range firepower support without focusing on MS battles, this machine is based on the RX-78-02 Gundam, which was basically designed as a multirole machine that can be equipped with various equipment changes depending on the battle situation, such as anti-ship and anti-fighter battles, while assuming MS battles as its "main weapon". In order to rebuild the strength of the Federation Forces as quickly as possible, its structure was simplified and costs were reduced with an emphasis on productivity, so it is a step behind the Gundam, especially in armor strength and reaction speed. Even so, it has become an MS with sufficient performance to serve as a mainstay weapon, and with data from actual battles with the Gundam inherited, it has been completed as a machine with specifications that exceed those of the Zaku II, albeit slightly. It is also equipped with a beam spray gun and a core pod as standard equipment, making it suitable for pilots with low skill levels.

The RX-78GP03 (RX-78GP03D) Gundam "Dendrobium" (aka Dendrobium, GP03) is the third unit of the Gundam Development Project, and the combination of the mobile suit unit - the RX-78GP03S Gundam "Stamen" - and the armed base "Orchis". It was introduced in the OVA series Mobile Suit Gundam 0083: Stardust Memory and also featured in Episode 4 of Gundam Evolve. It was initially piloted by Anaheim test pilot Defrah Kar, and later by Federation MS pilot Kou Uraki. The goal of the Gundam Development Project was to create the most powerful mobile weapon. To that end, Unit 1 focused on maximizing the maneuverability and mobility of a mobile suit, while Unit 2 sought to combine the strongest mobile weapon with the strongest strategic weapon. Finally, Unit 3 sought to combine the versatility of a mobile suit with the heavy firepower of a mobile armor.Developed for base defense in space, the Gundam "Dendrobium" consisted of two parts: the mobile suit Gundam "Stamen" and the Armed Base "Orchis". The "Orchis" was essentially a massive mobile arsenal, featuring a variety of weapons and allowing the "Dendrobium" to switch to different weapons after deployment for different battle scenarios, from long range to close range combat. In addition to its massive array of weapons, the "Orchis" also boasted impressive mobility thanks to its large propellant capacity, and was able to rival a Zeon mobile armor in combat abilities. It was also equipped with a large I-Field generator on its right side for protection against beam weapons.

The ORB-01 Akatsuki Gundam (aka Akatsuki Gundam, Akatsuki) is a Mobile Suit introduced in the anime Mobile Suit Gundam SEED Destiny. It is initially piloted by Cagalli Yula Athha using the "Oowashi" Sky Pack, and later by Mu La Flaga using the "Shiranui" Space Pack. The Akatsuki Gundam was developed through the fusion of the knowledge that the Orb engineers had gained from studying the GAT-X105 Strike Gundam and its Striker Pack support system, with newer Orb-based prototype technologies. Its standard armaments include a twin beam saber, head-mounted CIWS, an arm-mounted shield, and a beam rifle. Its most remarkable feature is its gold-colored armor, known as the Yata-no-Kagami. Gold is the color reserved for Orb's ruling class, and this armor is actually a mirror surface armor capable of deflecting and even reflecting beam fire with help from the Akatsuki's sensors, making the mobile suit virtually impervious to beam shots. Despite this, its vulnerability to melee and physical weapons remained equal to that of any other mobile suit, hence the presence of a shield as part of its armaments.The Akatsuki can also equip two optional backpacks, which are derived from the Strike Gundam's Striker Packs, to improve its combat abilities. On Earth, it can use an aerial backpack known as "Oowashi" Sky Pack, granting it atmospheric flight capabilities. Armed with two beam cannons, the Oowashi can separate from the mobile suit and transform into a support aircraft, similar to the ZGMF-X09A Justice Gundam's Fatum-00. With this pack on, the suit is known as Oowashi Akatsuki Gundam. When operating in space, the Akatsuki can use another backpack known as the "Shiranui" Space Pack, which increases the suit's mobility and equipped it with seven remote control beam turret units that have offensive and defensive capabilities. With this pack on, the suit is known as Shiranui Akatsuki Gundam.