High Grade 1/144 Gundam

The MSM-08 Zogok is a prototype amphibious mobile suit introduced in the original design series MSV and made its animated debut in Mobile Suit Gundam ZZ. It later appeared in the OVA Mobile Suit Gundam Unicorn. The MSM-08 Zogok is a prototype amphibious mobile suit with improved melee capabilities that was developed during the One Year War. A variant of the MSM-07 Z'Gok, the Zogok was one of the special operations "Ag series" mobile suits created by Zeon engineers at California Base for Zeon's invasion of the Earth Federation Forces' underground military headquarters of Jaburo. It was meant to work alongside the other mobile suits of the series, such as the MSM-04G Juaggu, and its role was that of the vanguard. Unlike Z'Gok, Zogok is not equipped with any firearms like mega particle cannons; instead, it has unique melee weaponry such as arm punches using its extendable arms, launchable boomerang cutters from the top of its head, etc. These weapons were also selected to minimize the emission of light and heat, lowering the chances of being detected during the infiltration into the heavily guarded Jaburo. Although an amphibious unit, the Zogok's combat capabilities are primarily meant for ground battles. The Zogok's aquatic ability is limited to travelling underwater using the propulsion units in the sole of its feet. Its backpack has no function underwater and was designed with maximum ground performance in mind. Like many other of Zeon's amphibious mobile suits, the Zogok has no independent head unit to reduce underwater resistance. The functions of such a head unit were integrated into the chest. The large mono-eye camera in the center of the chest has a wide range of motion, and the transparent cover protecting it has fairly high durability.

The MS-06R-1A Zaku II High Mobility Type is a mobile suit first introduced in Mobile Suit Variation. After the successful release of the MS-06R-1 Zaku II High Mobility Test Type the Zeon engineers began to receive feedback from the pilots on ways the mobile suit's design could be improved. The biggest difference from the R-1 is that the fuel tanks on the back and legs have been modified into cartridges to solve the problem of propellant consumption. In particular, those of the legs are changed into cylindrical cartridges. This not only simplifies replenishment in the mother ship, but also allows for replenishment in outer space, and a platoon equipped with this unit is to be accompanied by a Zaku equipped with refill cartridges. As a result of these changes, the MS-06R-1A Zaku II High Mobility Type has a longer operation time. Furthermore, an escape system has been adopted in the cockpit for this machine, and it is possible to eject the seat and base forward in an emergency. The base has a certain degree of propulsion function, and is also equipped with solar cells and life support devices.

The MS-06F-2 Zaku II F2 Type (aka MS-06F2 Zaku II F2 Type) is a mobile suit introduced in Mobile Suit Gundam 0083: Stardust Memory. The F2 Type was the late production variant of the MS-06F Zaku II. Based on the operation data of its predecessor, the F2's design concept was to revise the Zaku II for anti-mobile suit combat - something that was not accounted for in mobile suit design until the MS-07B Gouf - by reducing its weight and increasing its thruster output. In addition, since the F Type's armor around the cockpit hatch was fragile, the F2 Type featured a redesigned chest armor, which became its most distinctive feature compared to other models of the same series. Since a portion of the F2 Type was produced after the implementation of the United Maintenance Plan, these units share the same unified cockpit design as well as some parts as other second phase production type mobile suits. These units were easier to pilot than existing mobile suits, and were popular among new recruits and cadets.

The MS-05B Zaku I was a mobile suit introduced in Mobile Suit Gundam. The MS-05B was the late production variant of the Zaku I and the first mobile suit assigned to combat units. An improvement over the MS-05A Zaku I Early Type, the B Type was visually identical to the A Type, but featured an improved cockpit design and better armor material. Like its predecessor, the MS-05B's power transmission pipes were all fixed and contained inside its armor. However, as the B Type saw wider deployment than the A Type, the flaws of this design quickly became apparent: since the power pipes took up most of its internal space, it was very difficult to improve its generator output or swap out parts. The structures of its limbs were also very complex due to the internalized power system. These problems would later be addressed by the MS-06 Zaku II series. Its weapons included a custom machine gun, a 280mm bazooka, and a spike shield. It could also be equipped with the standard weapons used by the MS-06 series, including the 120mm machine gun and the heat hawk.

The MS-14JG Gelgoog Jäger is a mobile suit introduced in Mobile Suit Gundam 0080: War in the Pocket. A variation of the MS-14 Gelgoog, the MS-14JG was specialized for precision firing mission, and was also known as "Gelgoog Sniper Type". It was designed with the United Maintenance Plan (UMP) in mind, greatly increasing its specifications and ease of piloting, as well as simplifying its manufacturing process and improving the interchangeability of its parts with other models. The Gelgoog Jäger was equipped with a total of 24 posture control sub-thrusters in addition to the main thrusters, significantly improving its mobility in space. Due to its nature as a sniper unit, its monoeye has a larger field of vision than standard units. In addition, since it was designed as a commander unit, it was equipped with a head-mounted blade antenna by default for enhanced communications. Similarly, its backpack had another antenna and a laser communication unit. The Gelgoog Jäger's primary weapon was a large-sized beam machine gun, which could either fire pulsed beam pellets or a single-shot long-range beam. It was able to use this weapon thanks to a tuned up, new model generator. The beam machine gun's low rate of beam deterioration, combined with its exceptionally accurate scope and the Jäger's latest fire control hardware and software, granted it unparalleled firing accuracy. As with other UMP mobile suits, the Gelgoog Jäger adopted standard 2nd Phase Production Type cockpit and manipulators, meaning it had the same control scheme as its peers and could use all of their weapons, reducing the required pilot training time for switching models and compensating for Zeon's lack of pilots.

The ZGMF-X191M2 ∞ Justice Gundam Type II is a mobile suit introduced in the animated film Mobile Suit Gundam SEED Freedom. It is piloted by Athrun Zala. An upgraded version of the ZGMF-X19A ∞ Justice Gundam, modified by Erica Simmons at the request of Cagalli Yula Athha. Originally made to test out the performance of the AMGS-X18P Cavalier Aifrid support craft, the Type II features enhanced performance over its predecessor. External changes to the Type II include a new head, new larger shoulders, changed skirt armors and legs, and the replacement of its signature horn's sensors with a beam blade emitter. A new panoramic cockpit has also been installed to improve the pilot's situational awareness. The main change to the Type II is the new M2X32E "Volantes" 4-winged sub-flight lifter developed off data from the EW454F Ootori Striker pack. It features enhanced flight performance and improved firepower, including additional beam saber emitters and missile launchers.

The ZGMF/A-262PD-P Mighty Strike Freedom Gundam is a mobile suit introduced in the animated film Mobile Suit Gundam SEED Freedom. It is piloted by Kira Yamato and co-piloted by Lacus Clyne. The ZGMF/A-262PD-P Mighty Strike Freedom Gundam is the combination of the ZGMF/A-262B Strike Freedom Gundam Type II and the MDE262S Proud Defender support craft, replacing the Super DRAGOON wing backpack and giving it enhanced combat ability. It uses advanced nanoparticle technology controlled by its wings to create various offensive and defensive abilities, including the creation of a spherical energy shield capable of absorbing heavy attacks from all directions, and a wide-scale electric attack that can shut down enemy targets and destroy projectiles within a large area around it.

The AGX-04 Gerbera Tetra (ガーベラ・テトラ) is a prototype assault mobile suit, designed by Mika Akitaka, and featured in the OVA Mobile Suit Gundam 0083: Stardust Memory. It was piloted by Cima Garahau. As part of its military reconstruction following the One Year War, the Earth Federation Forces began its Gundam Development Project in collaboration with Anaheim Electronics, the goal was to produce new experimental Gundam-type mobile suits. The intended fourth unit in this GP series was the RX-78GP04G Gundam "Gerbera". Its design sought to replicate the high-speed mobile suit assault tactic successfully established by the Principality of Zeon late in the war, in which a single mobile suit was able to penetrate the enemy forces and deal heavy damage as exemplified by the MS-18E Kämpfer. However, the role of the "Gerbera" was found to have many overlapping elements with its brother unit, the RX-78GP01 Gundam "Zephyranthes" which was upgrade-able for space combat, so its development was cancelled. As a result, Anaheim Electronics was left with a half-completed "Gerbera". The division within Anaheim Electronics that produced the "Gerbera" was created from the Zeonic Company (which still had strong loyalty to Zeon) and was approached by the Delaz Fleet. The division then revised the design of the "Gerbera" to hide its origin, and produced the AGX-04 Gerbera Tetra. The Gerbera Tetra features a simple armament, consisting of four 110mm machine guns, two mounted in each forearm, two beam sabers for melee combat, and a beam machine gun, a beam weapon with a much higher rate of firepower than standard beam rifles. The Gerbera Tetra can be equipped with an optional stürm booster on its back, which despite increasing the overall mass, dramatically increases the suit's speed and flight range.  

The GN-0000GNHW/7SG 00 Gundam Seven Sword/G (aka 00 Gundam Seven Sword/G, Seven Sword/G) is an upgraded variant of the GN-0000/7S 00 Gundam Seven Sword. Introduced in the side story Mobile Suit Gundam 00V: Battlefield Record, it is piloted by Setsuna F. Seiei.

Evangelion Production Model-02 (エヴァンゲリオン 正規実用型 2号機, Evangerion Seiki Jitsuyōgata Nigōki?) is an Evangelion unit appearing in Rebuild of Evangelion film series. It was introduced in Evangelion: 2.0 You Can (Not) Advance, piloted by Asuka Shikinami Langley, as well as briefly by Mari Makinami Illustrious during the battle against the Tenth Angel.

The xvt-mmc Geara Ghirarga (煌（ギラ）・ギラーガ?) is a Gunpla that appears in the Gundam Build Divers and Gundam Build Divers Re:RISE. Based on the xvt-zgc Ghirarga, it is built and piloted by Do-ji.

The MSM-10 Zock was one of Principality of Zeon's amphibious mobile suits developed during the One Year War. It was introduced in the anime Mobile Suit Gundam.

The High Grade Gundam Breaker Battlogue (HGGBB) MSB-GH03 Gundam Helios is a 1/144 scale kit released in 2021.

The KMK-B01 Kamiki Burning Gundam is a Gunpla introduced in Gundam Build Fighters Try. It is built and piloted by Sekai Kamiki.

The High Grade Gundam SEED (HG SEED) ZGMF-X56S/β Sword Impulse Gundam is a 1/144 scale kit released in 2005.

The High Grade Gundam SEED (HG SEED) ZGMF-X56S/β Sword Impulse Gundam is a 1/144 scale kit released in 2005.

The High Grade Gundam SEED (HG SEED) ZGMF-X23S Saviour Gundam is a 1/144 scale kit released in 2005.

The High Grade Gundam SEED (HG SEED) ZGMF-1000/A1 Gunner ZAKU Warrior (Lunamaria Hawke Custom) is a 1/144 scale kit released in 2005.

The High Grade Universal Century (HGUC) RGM-79D GM Cold Districts Type is a 1/144 scale kit released in 2003.

The V07-0126 Sigrún (ジークルーネ?) is a mobile suit introduced in the Mobile Suit Gundam IRON-BLOODED ORPHANS MSV[1] and appearing in Mobile Suit Gundam IRON-BLOODED ORPHANS G. The Sigrùn is one of the mobile suits that adopted the Valkyrja Frame developed near the end of the Calamity War over 300 years ago. It was designed under the concept of a high mobility/high output unit that could change the tides of the war, resulting in a high-performance machine. The small but high output thruster units are prominent features of the Sigrún. Close-quarters combat using the Valkyrja Rapier, Sigrún's main melee weapon, is supported by the thruster units mounted on the back and waist. The Sigrún also uses the Valkyrja Round Shield alongside the Valkyrja Rapier, and both weapons as well as the curved design of the mobile suit's armor are reminiscent of knights from the Middle Ages. The Valkyrja Frame was developed to become a symbol of those who wished to win the Calamity War. However, only a few battle records exist of the Sigrún and other Valkyrja Frame units. This was because mobile suits developed around the same time which used the Gundam Frame swept the battlefield, and the war ended before the Valkyrja Frame units were able to play an active role, causing them to fade into obscurity. So few units were manufactured and only a limited number of people know about them. Despite this, Sigrún and the other Valkyrja Frame units were re-evaluated after the war. Gjallarhorn carried out research based on the design concept of the Valkyrja Frame during the development of its mainstay mobile suits.