Master Grade 1/100 Gundam

The XXXG-00W0 Wing Gundam Zero (ウイングガンダムゼロ EW Uingu Gandamu Zero?) (aka Wing Zero) is a mobile suit that appears in the OVA/movie Mobile Suit Gundam Wing Endless Waltz and the manga Mobile Suit Gundam Wing Endless Waltz: Glory of the Losers. Wing Zero was based on the Zero Frame technology developed by the five Gundam Scientists, which was an inner frame with all the necessary components for the mobile suit to operate, completely separate from the armor platings and energy conduits for weapons. The performance of the frame itself surpasses that of the OZ-00MS Tallgeese, and the complete separation of armor and internal structure allows Wing Zero to continue fighting after losing up to 90% of its armor.[1]In the Glory of the Losers manga, Wing Zero is developed from the wreckage of the destroyed Wing Gundam Proto Zero, and upgraded with wing binders from the OZ-00MS Tallgeese Flugel. It combines the armament and equipment of the TV version and the EW version, such as having a shield and being able to transform into Neo-Bird Mode.

AMX-004 Qubeley (キュベレイ Kyuberei?) is a mobile suit that appears in Mobile Suit Zeta Gundam and Mobile Suit Gundam ZZ. It is piloted by Haman Karn. The Qubeley is a next generation mobile suit designed for Newtypes that features numerous technological innovations which allow it to fight on par with other advanced mobile suits that appeared during the Gryps Conflict and the First Neo Zeon War. Developed from the data gathered from the MS-09R4 Psycommu Rick Dom "Schnee Weiss" and the AMX-001 Prototype Qubeley, the Qubeley featured four independently movable shoulder binders, two binders per shoulder, to assist in AMBAC (Active Mass Balance Auto Control), granting phenomenal mobility. Though lacking the full range of motion as the arms and legs, these binders bring the Qubeley's total number of movable limbs up to eight. Furthermore, these binders also contain the Qubeley's primary thrusters.The most notable feature of the Qubeley is that it is the first combat mobile suit to be equipped with a mobile suit-sized psycommu system, which is used to control the new remote controlled weaponry known as "Funnels". The prototype featured a similar system, but its psycommu had not been fully miniaturized and the Funnels were stored in its main body, leaving the prototype with a large body that stood 25 meters tall. The system aboard the Qubeley had been perfected and its ten Funnels were stored in a container located in its rear armor, allowing for quicker deployment and recall. The Qubeley lacks the mega particle cannons of the prototype version, replacing them with a pair of dual-purpose beam guns that can double as beam sabers for close combat. Lastly, the Qubeley is one of the first Zeon mobile suits to use a dual-type optical sensor instead of the traditional mono-eye.

The XXXG-0SR Gundam Sandrock (aka Sandrock , Gundam Zero-Four or Sandrock Ver.Ka.) is a mobile suit from the manga Mobile Suit Gundam Wing Endless Waltz: Glory of the Losers and is piloted by Quatre Raberba Winner. The Sandrock was constructed by Instructor H in the L4 colonies under the financial support of the Winner family. Designed for operations on land, especially in a desert environment, it has high combat capabilities and excels in melee combat with its strong armor that is more robust than other Gundams'. In addition, it has advanced communication and information analysis systems as it was designed as a commander unit and tasked to be the core of the command system for the Maganac Corps and the five Gundams. Following its self-destruction and then restoration by the Maganac Corps, the Sandrock was painted in a new bluish-purple color scheme.

The ZGMF-1000/A1 Gunner ZAKU Warrior is a Mobile Suit introduced in the anime Mobile Suit Gundam SEED Destiny. A variant of the ZGMF-1000 ZAKU Warrior equipped with the Wizard System's EX-A1 Gunner Wizard on its back. The Gunner ZAKU Warrior is specialized for artillery strikes, and its main weapon is the M1500 "Orthros" high-energy long-range beam cannon mounted on the Gunner Wizard. This beam cannon is the strongest ranged weapon available to the ZAKU Warrior and grants it impressive firepower over long ranges, capable of destroying any mobile suits or mobile armors within its line of fire.

GNT-0000/FS 00 Qan[T] Full Saber (aka 00 Qan[T] Full Saber, pronounced "Double-Oh Quanta Full Saber") is a variant of the GNT-0000 00 Qan[T]​ that appeared in Mobile Suit Gundam 00V: Battlefield Record. The 00 Qan[T] Full Saber is the 00 Qan[T] equipped with the GN Sword IV Full Saber equipment, which is supposed to function like the GNR-010 0 Raiser, to adjust the synchronization of GNT-0000 00 Qan[T]​'s twin drive system. However, since tests showed that the Qan[T]'s GN drives can be be fully synchronized without the need of adjustments, the GN Sword IV Full Saber became unnecessary and is not equipped on the suit even though it has been manufactured. Unlike the backpack-like structure used in the normal 00 Qan[T]​, a more traditional cone GN Drive chassis is used on the Full Saber. Both the GN Sword IV Full Saber and the GN Shield are physically connected to this alternate backpack in a style more reminiscent of its predecessor 00 Raiser. As a result, the GN Sword IV Full Saber on the right side can help to balance out the GN Shield on the left and thus maintain the suit's balance during combat. The 00 Qan[T] Full Saber setup is also equipped with two new weapons. First is the GN Sword IV, which can transform into 5 different modes for carrying different kinds of attacks. Second is the GN Gunblades, three dagger-like blades attached to the GN Sword IV which can be used in three different forms.

The GN-0000/7S 00 Gundam Seven Sword (aka 00 Gundam Seven Sword, 00 Seven Sword), is a weapons pack/equipment variation for the GN-0000 00 Gundam that appeares in the Mobile Suit Gundam 00V side story. It is later given a additional weapon and re-designated as GN-0000GNHW/7SG 00 Gundam Seven Sword/G. With Celestial Being (CB) rebuilding their organization after their defeat in A.D. 2308, they began development of the 3.5 and 4th generation Gundams. The lone 4th generation Gundam, the GN-0000 00 Gundam, had undergone continuous beta testing of its experimental Twin Drive System by members of CB's engineering team and Tieria Erde. The original 00 Gundam was made as a close combat mobile suit, normally equipped with its GN Sword II. However, CB soon realized that the 00's basic arms would not be enough to counter the rapidly advancing mobile suits developed by the Earth Sphere Federation. Taking inspiration from the GN-001 Gundam Exia's diverse Seven Sword System, CB engineers created the Seven Sword package for the 00 Gundam, improving the units effectiveness in close combat while also attempting to stabilize the Twin Drive System.The original Seven Sword System was designed specifically for the Gundam Exia. Armed with one GN Sword, two GN Blades, two GN Beam Sabers and two GN Beam Daggers, the package was meant bring out the full close combat fighting strength of the Exia. Coupled with the close combat fighting style of its Gundam Meister Setsuna F. Seiei, Exia served its role as the close combat Gundam prior to is disappearance after A.D. 2308. Seeking to do the same with the 00 Gundam, CB engineers incorporated a mix of technologies into the 00 Gundam's Seven Sword armament. Befitting its name, the 00 Gundam Seven Sword was armed with 7 close combat weapons; the experimental GN Katars, the standardized GN Beam Sabers, the long and short GN Sword IIs, and the large GN Buster Sword.The 00's GN Beam Sabers were significantly improved from the Exia's. Originally, Exia had a set of four beam blades, a pair of daggers and a pair of normal beam sabers. While they were helpful in a few situations, the sabers' lengths were non-adjustable for differing combat situations. With that in mind, CB engineers created the beam sabers to be adjustable in length, increasing their overall efficiency in combat.The GN Katars are mounted on the sides of the 00 Seven Sword's kneecaps, which must be exchanged with the standard white kneecaps to properly holster the weapons. The design is taken from the famous Indian weapon, as well as the 00's GN Shields. The GN Katars are meant as push daggers for stabbing into an enemy. To enhance their capabilities, CB engineers equipped the katars with GN Particle infused blade edges, consisting of the material used in GN Condensers. While attacking, the particles surrounding the katar are converted to heat, and the heat is transferred to the object the katar comes into contact with. However, the heat generated by the particles can be too much for the katars themselves to tolerate. The experimental weapons inspired a line of other condenser infused weaponry for the next generation of Gundams.Taking a design cue from the Exia's GN Blades, CB engineers created the GN Sword II Long and GN Sword II Short. While both swords are physical exaggerations of the aforementioned blades, they vastly differ in function. The GN Sword II is more of a traditional broadsword, able to switch between rifle and sword mode faster than the original Exia could. The long GN Sword II focuses on ranged combat, the only such weapon in the 00 Seven Sword arsenal to do so. The drawbacks are that the long sword uses more particles and a decreased rapid fire capability. In contrast, the GN Sword II short was developed analogous to the GN Short Blade from the Exia. The shortest sword in the Seven Sword armament, the Short Sword's blade tip is attached to a wire, which can be shot out towards an enemy and retracted quickly. Despite these armaments, the signature weapon of the Seven Sword arsenal is the GN Buster Sword.At nearly the same height as the 00 Gundam, the GN Buster Sword is a massive weapon which serves multiple purposes. CB engineer Ian Vashti analyzed the Buster Sword of a GNX-607T/AC GN-XII Sword captured by Fon Spaak in the sword's development. Normally stored on the left GN Drive mount, the GN Buster Sword can expand its frame to particle vents to create a massive GN Field. The scope of the field is so large that it can protect allied suits. When the sword is actively wielded, it is a top class melee weapon. Though the array of weapons were tailored to suit the fighting style of Setsuna F. Seiei, the Meister as well as his Gundam, had been missing during the Seven Swords' development. On top of that, the pack did not stabilize the highly unstable Twin Drive System, and a separate support unit, the GNR-010 0 Raiser, was given a higher priority than the Seven Swords. However, CB hadn't forgotten about the Seven Swords configuration.After the battle with the Innovators, the 00 Gundam had taken some damage, but the greater concern was the fact that its GN Drives were critically damaged in the duel between the GN-000 0 Gundam and the GN-001REII Gundam Exia Repair II. With the 5th generation Gundams in construction, CB developed a modified version of the 00 Gundam Seven Sword, the GN-0000GNHW/7SG 00 Gundam Seven Sword/G as a test-bed for future weapons and systems.

The MBF-02VV Gundam Astray Turn Red is a Mobile Suit appearing in the Mobile Suit Gundam SEED Destiny Astray R photonovel. The Gundam Astray Turn Red is a mobile suit created by Valerio Valeri for his own use. However, since the suit is fully controlled by the combat AI called "80", he does not need to do any actual piloting, although he still sits in the cockpit. The suit has a custom head unit and backpack. Its main body is constructed using MBF-P0X Gundam Astray Noir's spare parts and its body color is basically a reverse of MBF-P02 Gundam Astray Red Frame's (hence the suit's name).The Turn Red is usually armed with a pair of head-mounted CIWS and a pair of Tactical Arms on its back, but it can also be equipped with the same type of beam rifle, beam sabers and shield as the Red Frame. It also carries additional power packs for the Tactical Arms like MBF-P03secondL Gundam Astray Blue Frame Second L. The mobile suit is supposed to be used alongside CAT1-VGR Hyperion GR and CAT1-VGL Hyperion GL, both are commandeered by the Turn Red itself and serve as its protectors during battle. The Turn Red is installed with the Trio System to improve its cooperation with the other two AI-controlled suits.

GN-001/hs-A01 Gundam Avalanche Exia (aka Gundam Avalanche Exia, Avalanche Exia) is a variant of the GN-001 Gundam Exia appearing in the side stories Mobile Suit Gundam 00V and Mobile Suit Gundam 00V: Battlefield Record. The Gundam Avalanche Exia is the Celestial Being's Gundam Exia equipped with additional high mobility unit known as "Avalanche Unit". The Gundams have exceptional flight control capabilities through the use of GN Particles, but their speed in the atmosphere and in space are generally inferior to that of specialized high-speed units such as aircrafts. Celestial Being's general mechanic, Ian Vashti, designed and created the Avalanche Unit to grant Exia a high level of mobility comparable to an aircraft's. This concept of utilizing a mobile suit like an aircraft is very similar to the AEU's, and might have been because Ian was previously the chief mechanic of AEU's armed forces and is highly skilled in such utilization of mobile suit.The multiple parts that make up the Avalanche Unit are equipped with GN Condensers and by discharging all their stored GN Particles through various verniers simultaneously, the Avalanche Exia can achieve a higher level of mobility. Additionally, during high-speed movements, the Avalanche Exia's forearm and shoulder parts are linked together in a quasi-transformation like manner. This reduces air resistance and generates a thin GN Field on the machine's surface to control the airflow on the exterior. The name, Avalanche, carries the meaning of "passing by in an instant, consuming everything in its path" and like its name, the mobile suit can outspeed the latest aerial combat mobile suits such as the SVMS-01 Union Flag, AEU-09 AEU Enact and even its fellow Gundam, the transformable, high-speed GN-003 Gundam Kyrios. The "hs" in its model number stands for "High Speed" and the "A01" means "Avalanche type Unit 1".The drawbacks of the Avalanche Exia are that it takes an hour to fully charge the Avalanche Unit's GN Condensers with GN Particles, which will be completely discharged in 10 minutes, limiting the use of the mobile suit to an extremely brief period of time and restricting its travel range. Even so, the Avalanche Exia still has high utility value as it allows the Exia to reach its combat location swiftly. While the one-hour charging time seems to make the Avalanche Exia unusable for unplanned missions, this issue is resolved to a certain degree as Ian always keeps the Avalanche Unit's GN Condensers fully charged. It is possible to extend the discharge time of the GN Particles and increase the travel range by concentrating the Avalanche Exia's supply of GN Particles to the verniers as well as lighten the Gundam by removing its armaments.The Avalanche Unit's GN Condensers are larger than regular ones and can be charged with more GN Particles. Unlike the regular GN Condensers that can display information about their status on the surface, the Avalanche Unit's GN Condensers are completely internalized and so their status are instead displayed on the Gundam's chest GN Condenser. As the Avalanche Unit's primary purpose is for high-speed movement, it does not come with additional weaponry. All the weapons of the normal Exia remain usable by the Avalanche Exia, but due to its higher speed, the Exia's characteristic seven swords have improved penetration and destructive power. To prevent the seven swords from being a hindrance during high-speed movements, they are all stored on the Avalanche Exia's upper body, with the majority mounted on a pair of weapon holders known as "Weapon Arms".The Avalanche Exia was seen relatively early during Celestial Being's armed interventions, and the Avalanche Unit's weight is kept below 5 tons as that was initially thought to be the maximum possible weight without negatively affecting the Gundam's balance. However, this assumption was later found to be wrong, and additional equipment is developed for the Avalanche Exia, resulting in the GN-001/hs-A01D Gundam Avalanche Exia', which is better adapted for operating in space. To prevent the Avalanche Unit from being a dead weight after use, its parts can be instantaneously purged from the Exia prior to the Gundam engaging in close combat.

The XXXG-01D Gundam Deathscythe (aka Deathscythe, Gundam Zero-Two or Deathscythe Ver.Ka.) is the second of five Gundams sent to Earth from the Space Colonies in the manga New Mobile Report Gundam Wing Endless Waltz: The Glory of Losers. It was piloted by Duo Maxwell. The Gundam Deathscythe was the "masterpiece" of Professor G. It has outstanding stealth capabilities, with a pair of Hyper Jammers mounted on its backpack that prevented the Gundam from showing up on radar or visual sensors, rendering it invisible to most electronics. This allowed it to sneak into facilities and even right up to enemy mobile suits without being detected. With the highest speed amongst the original 5 Gundams, the Gundam Deathscythe's battle style revolves around approaching the enemy rapidly, striking and then retreating.The Deathscythe's primary weapon was its namesake beam scythe. The power and reach of the scythe enabled it to destroy most single (and sometimes multiple) targets in one sweep. The Deathscythe also carries a Buster Shield on its left arm, which doubled as launchable scissor katar. Rounding out its arsenal was a set of head-mounted vulcan guns.The suddenness with which this sinister looking Gundam arrive, its invisibility on sensors, and the speed and ferocity of its attacks all strike great fear in its enemies, befitting its grim reaper visage.

The GAT-X105+AQM/E-X01 Aile Strike is a prototype high mobility mobile suit introduced in Mobile Suit Gundam SEED. Its primary pilot was Kira Yamato before it was passed down to ace pilot Mu La Flaga. The AQM/E-X01 Aile Striker is the most commonly equipped Striker pack for the Strike as it provides the greatest versatility. Thanks to the powerful vernier thrusters built into the Aile Striker, the Strike Gundam becomes an all purpose combat mobile suit with enhanced speed and maneuverability compared to its base capabilities.Despite the strength of the thrusters, they do not perform well enough for true flight capabilities inside Earth's atmosphere. However, they do allow the Strike to glide in the air for a short time and enhance its jumping capabilities to the point that it can combat mobile suits on Guuls that are flying low. Besides the standard armament of the GAT-X105 Strike Gundam, the Aile Striker pack adds a pair of beam sabers to the suit's armament.

The MS-14S (YMS-14) Gelgoog Commander Type is a commander mobile suit that entered production as the MS-14A Gelgoog. Featuring a high-powered generator, various thrusters to aid mobility, a large pointed oval-shaped shield, a Beam Rifle, and a Beam Naginata, the MS-14S Gelgoog Commander Type rivals the capabilities of the Earth Federation's RX-78-2 Gundam. In fact, compared to the Gundam, the Gelgoog Commander Type is slightly faster, more mobile and possesses a more powerful generator and beam weapon selection; this was proven by Char during his first sortie in his personal unit against Amuro Ray's Gundam during the One Year War. On the other hand, it has thinner and less durable armor than the Gundam (which is built with Luna Titanium Alloy), and the lack of built-in weapons makes the Gelgoog easier to disarm (which Amuro literally did) and leave weaponless.

This Bandai limited edition set is specifically released in China. EG 1/144 GAT-X105 Strike Gundam Ver. Azure Dragon EG 1/144 RX-78-2 Gundam  Ver. White Tiger This limited edition model set features unique design elements and color schemes that pay tribute to the legendary creature. Estimated Delivery: Late Spring / Early Summer 2023 Kits Included: 2 Grade: EG Scale: 1/144 Please read our Preorder FAQ carefully before placing the order. 

This Bandai limited edition is specifically released in China. The MG ZGMF-X20A Strike Freedom Special Edition Kit is inspired by the Vermilion Bird, one of the four mythological creatures in Chinese mythology. This limited edition model features unique design elements and color schemes that pay tribute to the legendary creature. Estimated Delivery: Late Spring / Early Summer 2023 Grade: MG Scale: 1/100 Please read our Preorder FAQ carefully before placing the order. 

The MSN-06S Sinanju Stein (aka Sinanju Stein) is a mobile suit featured in the PlayStation 3 video game Mobile Suit Gundam UC and UC-MSV. Built from the data of both the MSN-04 Sazabi and RX-93 ν Gundam, the Sinanju Stein was developed as part of the Earth Federation Forces reorganization plan known as the "UC Project". Stein means "stone" in German and Norwegian, and the Sinanju Stein's name was a reference to it being "a jewel in the rough". This mobile suit was created by Anaheim Electronics to test the sensitivity and durability of the lightweight and rigid material, the Psycho-Frame, for use in a mobile suit's internal movable frame. The Sinanju Stein was also equipped with a Psycommu system, and the "Intention Automatic System", which functions by using the Psycho-Frame's sensitivity to the pilot's thought-waves to directly affect behavior of the mobile suit.The suit boasts high mobility and features flexible thrusters on its legs and backpack, allowing it to achieve precise movements at high speeds. Due to its murderous acceleration, it was impossible for ordinary pilot to control the Sinanju Stein, and its evaluation tests were conducted on autopilot to test the limits of the Psycho Frame. Therefore, the Sinanju Stein can be said to be a defective machine for humans to pilot, but in reality, it was designed to be flown by Newtypes, as Anaheim Electronics was planning to hand it over to the Neo Zeon remnant group, the the Sleeves, in a backroom deal, in the form of a transfer disguised as a robbery.Two lines of mobile suits were later developed using the Sinanju Stein as a base. These were the RX-0 Unicorn Gundam and the MSN-06S Sinanju. The Unicorn Gundam was thought to be developed by based on the data of the Sinanju Stein's test. The Sinanju was refurbished using one of two units stolen the Sleeves, and had its response levels tuned down as its controls were too sensitive. Due to how famous the Sinanju later became, the Sinanju Stein was also referred to as "The stone from which Full Frontal's Sinanju was hewn". The other stolen unit was also embellished with the engravings of the Sleeves and deployed in battle over RX-0 Unicorn Gundam 03 Phenex. What is Ver.Ka In 2002, Bandai started releasing a Master Grade line under the label of “Ver. Ka” (Version Katoki), in honor with veteran mecha designer Hajime Katori. Some of the Ver. Ka kits were produced as a result of annual fan votes.

The ZGMF-X10A Freedom Gundam (aka Freedom, X10A) is a mobile suit introduced in the anime Mobile Suit Gundam SEED and is piloted by Kira Yamato. One of ZAFT's ZGMF-X series of Gundam units build in C.E. 71 using technology derived from the four captured Alliance's Gundam, the Freedom Gundam has Phase Shift Armor and its armaments include CIWS guns, beam sabers, shield, plasma beam cannons, railguns, and a beam rifle. When the latter three weapons are used simultaneously, the Freedom is said to be in 'Full Burst Mode'. The suit has full flight capabilities in the atmosphere and the back-mounted wings can be deployed in "High Mobility Aerial Tactics (HiMAT) Mode" to enhance its mobility in the atmosphere or in space. It also has an advanced targeting system, the Multi Lock-On System, that allows it to target and fire at multiple enemy units simultaneously. Due to its capabilities and loadout, the suit has a reputation as a specialized 'Mobile Suit Killer', but its high performance resulted in a complicated control system that demands extremely fast reaction speed and spatial awareness from its pilot.When required, the Freedom Gundam can dock with a support unit, the METEOR unit, for heavier firepower and greater speed. The Freedom Gundam has virtually unlimited combat endurance as it is equipped with a Neutron Jammer Canceller and powered by a nuclear reactor. Kira describes the suit as having over four times the power of the GAT-X105 Strike Gundam. However, what this exactly means is unclear. The Freedom Gundam is meant to operate alongside the ZGMF-X09A Justice Gundam, and they are often based on the warship, the FFMH-Y101 Eternal, which is designed specifically to maintain them. Even in CE 73, the suit is still considered by some people, such as Shinn Asuka, as the most powerful mobile suit out there. Overall, it is one of the Clyne Faction's symbols of power, along with the Eternal, the Archangel, and the Justice.

The MSM-07S Z'Gok Commander Type is a variant of the MSM-07 Z'Gok created by the Principality of Zeon during the One Year War. An improved, higher performance model of the Z'Gok, it has higher reactor output, better maneuverability and a change in armor materials. It eventually became the standard Z'Gok model.

The GN-001 Gundam Exia (aka Exia, Gundam Seven Swords) is a mobile suit featured in season one of Mobile Suit Gundam 00 and is piloted by Setsuna F. Seiei. Specializing in close combat and armed mainly with melee weapons, the Gundam Exia is one of four Gundams deployed in AD 2307 by the paramilitary organization, Celestial Being, to eliminate world conflicts through armed interventions. To fight against the world with their small numbers and win, these Gundams have overwhelming power and equipped with advanced technology a century ahead of its time. Notably, the semi-perpetual GN Drive mounted in the center of the Gundams provide almost limitless energy and generates special, multifunctional GN Particles. The GN Particles grant outstanding mobility, including independent flight capabilities, and are also utilized for beam weaponry, attitude control, and stealth purposes as the discharged particles can cause electromagnetic interference, leaving conventional communication and radar devices useless. The Gundams also share common aspects with conventional mobile suits, such as the use of E-Carbon for its armor material. However, the Gundams' E-Carbon has higher defensive power due to the use of advanced materials.An example of Exia's overwhelming power is that its output was estimated to be about six times that of the SVMS-01 Union Flag, one of the newest conventional mobile suits at the time. The technical hurdles that had to be overcome to create the powerful Gundams and their GN Drives were high, making their production extremely difficult and caused the Gundams' development to occur in phases. The first generation machine, the GN-000 0 Gundam, established the basic system of a mobile suit powered by a GN Drive, and armed with a beam gun and beam saber. Subsequently, four second generation machines were developed with individual capabilities required for armed intervention, and their data served as a basis for the third generation machines, which included Exia and the other three Gundams deployed in the armed interventions. Specifically, Exia was developed from the GNY-001 Gundam Astraea, a general-purpose mobile suit with human-like movability that was used for testing various weapons, and the two machines have a number of similarities in terms of appearance.The Astraea's movability aspect is particularly appropriate for the Exia, which requires the same range of articulations as the human body due to its close combat specialization. Thus, while the Exia is armed mainly with melee weapons, its basic performance remains that of a general-purpose mobile suit. In fact, Exia is the only Gundam deployed for the armed intervention that has a body structure capable of range of articulations like the human body's, and the omission of such a structure in the other three Gundams is simply because they do not require it as their specialization is in other areas. To achieve its wide range of articulations, Exia has the most complex basic frame out of the four Gundams, its armor is also more minutely segmentalized as well. This armor design however causes some internal structures and the joints to be unprotected during certain poses, lowering Exia's defensive capability. On the other hand, this design does provides better mobility, giving Exia the best projectile evasion capability among the four Gundams.The Exia also has finer attitude control capabilities than the other Gundams, which is beneficial for close combat, and this is related to its GN Cables. The GN Cables, also known as “GN Power Lines”, are the light purple-colored cables running through various parts of the Exia's body and also one of its eye-catching visual features. While these cables are also found on other Gundams, the ones extending from the shoulders to the upper arms are unique to Exia. The cables facilitate the supply of tremendous amount of GN Particles, and thus energy, to each part of the Gundam instantaneously. They are also used for attitude control due to the GN Particles' mass reduction effect, and so, the Exia which has more cables on its exterior than the other Gundams is able to achieve finer control. In terms of defense however, such placements are dangerous, and later in GN-001REII Gundam Exia Repair II, the cables become mostly stowed in the armor.The GN Particles' mass reduction effect also lightens the Gundam, and can be used to alter the mass ratio of various body parts. Due to this latter ability, it is possible to freely control the machine's inertia and turning capabilities when in the air, and for Active Mass Balance Auto-Control (AMBAC) when in space. This also eliminates the need for the legs to "walk” when moving. As for the control of GN Particles, it is largely carried out by the two clavicle antennas on the Gundam's torso. A minor role is played by the third generation Gundams' head antenna, which is experimentally equipped with particle control functions. The head antenna also has communications and radar search functions, as well as the black box for quantum communication linkage with Veda (the Celestial Being's quantum computing system). The rest of the Gundams' humanoid head unit also contain systems responsible for controlling the entire body, much like a human's head. On a side note, the Exia's head is designed to look like the helmet of the pilot suit worn by the Gundam Meisters in AD 2307-2308 to express the belief of “Meister = Gundam”.While the GN Drive can produce GN Particles endlessly, even when the Gundams are inactive, there is a limit to the amount that could be instantaneously produced. Thus, continuous or heavy usage of beam weapons and other GN Particles consuming systems might cause the Gundams to run out of particles. To avoid this, the Gundams have GN Condensers in various body parts to store excess GN Particles. For maintenance purposes, the condensers can display the particles' compression rate and the amount stored. During mission, this display function is used for transmitting coded messages to allied units. On the matter of GN Drives, Celestial Being only created five units as that was deemed to be the minimum needed for armed interventions. The low number is not only due to difficulties in manufacturing the GN Drive, which requires Jupiter's high gravity environment, but also because having more GN Drives would increase the risk of them falling into the enemy's hands.The Gundam Exia is nicknamed “Gundam Seven Swords” as its development code was “Seven Swords”, and as indicated by this name, it is equipped with a total of seven blades to meet the needs of the moment during combat. Of these seven, the GN Sword, GN Long Blade, GN Short Blade are physical blades, while the rest are beam-based and consisted of two GN Beam Sabers and two GN Beam Daggers. The GN Sword serves as the primary weapon and due to its low energy consumption, the Exia has an advantage in prolonged combat, which mainly occurs when fighting ace pilots or when subjected to traps such as the three major bloc's joint military exercise. The three physical blades also serve as countermeasures against GN Field, a protective barrier made of GN Particles. In other words, Exia is also intended to fight against Gundam/GN Drive-equipped machine that is piloted by a betrayer or captured by the enemy and used against Celestial Being. Early on, an alternate configuration of the GN-005 Gundam Virtue also had an anti-betrayer role, but its design was dropped and this increased the responsibilities placed on Exia and its Gundam Meister.Other armaments include a GN Shield for defense that also provides protection to the internal structures and joints that might be exposed during movements. The GN Shield is usually in a compact size to maintain Exia's range of articulations, but can expand to increase the defensive area when needed. Similarly, the GN Sword, can fold its blade and has a Rifle Mode for ranged combat. The last of Exia's armament is another ranged weapon in the form of a pair of low-power GN Vulcans mounted in the forearms. During battles, the Exia gloriously sliced through its opponents in close combat, leaving a powerful impression on those who witnessed it and contributing greatly to the instillment of a "fear of Gundams" in the world. This was already anticipated by Celestial Being, and it is because of this that the organization's tactical forecaster, Sumeragi Lee Noriega, selected the Exia to intervene in the AEU-09 AEU Enact's presentation ceremony, which became the unveiling of the paramilitary organization.The Gundam Exia has an "Over Boost Mode" that temporarily boosts its GN Drive's performance and thus increase the mobile suit's capabilities. During an emergency, the Exia can activate a special "Trans-Am System" that enhances its thrust and defensive capabilities, as well as increase its output to three times that of its normal specifications for a limited period of time. This system also causes the Gundam to glow red, but it is a double-edged sword as Exia's performance will drop dramatically once it ends. A number of additional optional equipment was also developed for Exia, such as the high mobility Avalanche Unit and the GNR-001E GN Arms Type-E support machine. When equipped with the Avalanche Unit, the Exia becomes the GN-001/hs-A01 Gundam Avalanche Exia and can speed past specialized high-speed mobile suits, which it normally cannot do despite having remarkable mobility. When docked with the GN Arms Type-E, the Exia becomes the GN-001+GNR-001E GN Armor Type-E, obtaining better mobility, offensive and defensive capabilities.

The MSN-001A1 Delta Plus (aka δ Plus) is a variant of the MSN-001 Delta Gundam which appears in the novel and OVA Mobile Suit Gundam Unicorn. It is piloted by Riddhe Marcenas. The Delta Plus is a prototype transformable mobile suit developed in U.C. 0090, which can serve as an all-purpose attack unit. It is based on the MSN-001 δ Gundam, a transformable mobile suit designed during the Gryps Conflict that, because of problems with insufficient frame strength, was completed as the non-transforming MSN-00100 Hyaku Shiki. While Anaheim Electronics was trying various approaches to develop a production model of the transformable Zeta series, it also simultaneously conducted a reinvestigation of the shelved Delta plan, creating the Delta Plus as a result. The Delta Plus' main feature is its capability to reenter the atmosphere unassisted thanks to its ability to transform into a waverider mode. It is also capable of atmospheric flight under the influence of 1G because of its high thrust output and is also equipped with a Bio-sensor. Due to the Delta Plus being a non-standard prototype, only a limited number of these units were produced.

The ZGMF-X09A Justice Gundam is a mobile suit introduced in Mobile Suit Gundam SEED and it is piloted by Athrun Zala. One of ZAFT's five ZGMF-X Gundam units produced in CE 71 using technology derived from the four captured Alliance's Gundam, the Justice Gundam's main feature is the Fatum-00 unit on its back. This complex armament unit normally serves as the main thrusters, granting overwhelming acceleration as well as mobility when deployed horizontally and this configuration is also known as 'High-Mobility Aerial Tactics (HiMAT) Mode'. It also grants flight capabilities in the atmosphere and can be deployed as a separate unmanned unit or a subflight unit. It is armed with beam cannons and machine guns.Other weapons of the Justice included beam sabers, beam rifle, shield, beam boomerangs and head-mounted CIWS guns. In comparison to the other ZGMF-X Gundam units, the Justice's armament is relatively simple and pales in firepower compared to its sibling, the ZGMF-X10A Freedom Gundam. However, the Justice's true value lies in its incredible mobility and the various tactics it can employ using the Fatum-00. It can also dock with a support unit, the METEOR unit, for heavier firepower and greater speed, and has an advanced targeting system, the Multi Lock-On System, which allows it to fire at multiple enemy units simultaneously.Justice also has a tall sensor spine on the top of its head, similar to that of the GAT-X303 Aegis Gundam, and this enhances its ability to collect information in the battlefield. It is designed to be operated alongside the Freedom and for this purpose, the warship Eternal is designed specifically to maintain both suits. Like the four other ZGMF-X Gundam units, Justice is armored with Phase Shift Armor and has virtually unlimited combat endurance as it is powered by a nuclear reactor thanks to the Neutron Jammer Canceller.

The XXXG-01W Wing Gundam (aka Zero-One or Gundam 01) is the titular mobile suit of the anime Mobile Suit Gundam Wing. It was primarily piloted by Heero Yuy. Out of the five original Gundams created for Operation Meteor, Wing Gundam is the most well-balanced in terms of abilities and bears the closest resemblance to their common ancestor: the XXXG-00W0 Wing Gundam Zero. Like Wing Zero, the Wing Gundam can transform into an alternate flight form known as "Bird Mode" and has a powerful Buster Rifle as part of its armaments. However, the "ZERO System" interface (which had technical problems) and other parts considered to be excessive were not included, and the skills of the pilot are needed to make up for the shortfall. Its cockpit is a spherical capsule surrounded by a linear frame, and it swivels in the same direction as the mobile suit's head. Unlike the standard OZ cockpit, it is a floating cockpit with a shock mitigation function.The major contributor to Wing's mobility is the pair of wing units on its backpack. These units not only generate lift, but can also change the aerodynamic characteristics of the mobile suit through the movements of their individual panels, supporting a range of speeds from stall to hypersonic. Even in outer space, these wing units exhibit high attitude control capability using both AMBAC and built-in vernier thrusters. By transforming into Bird Mode, Wing's mobility and movement range are increased further, allowing it to conduct operations that other Gundams could not. The leg thrusters on the back of the knees serve as the main verniers in Bird Mode, and are also used for dashing on the ground in MS mode.