Tools

A surfacer containing a primer component. [Precautions for use] Store out of reach of children and be careful not to accidentally swallow or eat. Since it contains organic solvent, improve ventilation both during painting and drying. When spraying paint, be careful not to get it on people or objects. Wear a mask and gloves during handling to avoid touching the skin as much as possible. If it gets on your skin, wash it with soapy water. In case of contact with eyes, rinse with water. If you feel sick, rest in a clean air. Seek medical attention immediately if you experience pain or changes in appearance. Cover the remaining paint and do not store it in direct sunlight, near heaters, or in rusty water or humid places in cans to prevent damage. Do not apply in places with fire. Do not use for anything other than painting.

Mr. Color Thinner is a multiple use material and is a must-have for anyone who wants to try their hand at painting. It is a necessary component to thin out Mr. Color paints can also be used during airbrushing for thinning and cleanup of Mr. Color paints.

Experience the satisfaction of smooth, efficient sanding that turns the task into an enjoyable experience. Experience the satisfaction of smooth, efficient sanding with sandpaper that offers water-based revival, long-lasting durability, and the ability to recover 80% of abrasive power after cleaning. Crafted from special materials and techniques, this sandpaper is suitable for both wet and dry use, providing an enhanced tactile experience and superior sanding results. Material: Synthetic Contains: Each box comes with 20 strips of synthetic sanding strips

Discover a selection of sturdy carbon fiber sanding boards, offered in three different sizes. These versatile sanding boards excel with adhesive-backed sandpaper, delivering precise and efficient sanding capabilities. Enhance your scale model and Gundam Gunpla building experience with carbon fiber sanding boards, available in three convenient sizes: 5mmx80mm, 15mmx80mm, and 20mmx80mm. These varying sizes cater to specific sanding needs, offering versatility and precision for a wide range of projects." Material: Carbon Fiber Three Size Per Pack: (1) 5mm x 80mm (1) 15mm x 80mm (1) 20mm x 80mm

Ultimate nipper is a exclusive plastic nipper which pursues “the ultimate section”. The nipper is specialized in gate cutting. When slice cutting 3mm runner, it does not make sound at all and cuts smoothly. Since the nipper cuts sharply, the section would be smooth as if it is filed with design knife. Therefore, it minimizes the whitening of plastic. Compared to other nippers, it cuts extra ordinarily beautiful. So we recommend this to people who want to finish modeling without paint. The “one-blade structure” and thin, sophisticated “cutting blade” is the key of ultimate nipper’s extraordinal sharpness. 【The function of each parts】 the side pin: it prevents falling the spring out by opening too widely. stopper: it prevents the blade to be broken by excessive power. ※object material: only plastic(PS resin, PP resin, ABS resin, PE resin) can be cut. ※cutting capacity: limited to object material within 3mm. But since transparent, or half-transparent PS resin is a hard material, the capacity is limited to less than 1mm. ※it is a sensitive nipper which focuses on sharpness. Please be aware of precautions, since there is a risk of breaking the blades if the nipper is handled in a wrong way.

Mr. Cement S is a "BRUSH ON" type low viscosity cement. It dries faster than MC124/MC127 Mr. Cement, so it is suitable for attaching fragile pastic parts together quickly. You must put together the plastic parts, and then brush on this cement on the gap between the two parts.

Mr. Cement is a high quality adhesive suitable for your model kits. It is the best choice when gluing together styrene plastic model kit parts. Each bottle contains a handy application brush inside the bottle cap. MC124 and MC127 contain the same cement, but MC124 contains 25ml and MC127 contains 40ml.

Mr. SUPER CLEAR is a solvent-type coating agent for creating surfaces of superior quality.It can be used not only for color painting, but also as the perfect coating agent when your work needs that added touch. important shipping infoCan only ship via ground transport. No overseas shipping, no express shipping.

Scale: 1/100 Supported Grade: MG Features: Adjustable angels Adjustable height 3 Colors to choose from

Blades included: 0.2mm 0.4mm 0.6mm 0.8mm 1mm

DESCRIPTION Tamiya Panel Line enamel paints are ideal for highlighting panel lines and other details to give your model a more realistic depth. The paint has been pre-diluted into the ideal viscosity and can be easily applied into crevasses such as panel lines with the brush on the bottle cap. Once dried, any excess may be cleaned up by using enamel thinner. (Bottle contains 40ml)   Examples of use: Black is a general-purpose color and can be used for any type of model. Brown is great for military models as well as highlighting details on bright colors such as Yellow or Orange. Gray is perfect for White or Light Gray parts where Black may be too distinct. Note: Plastic parts may become brittle when using Tamiya Panel Line accent colors. Avoid using on movable parts and take care when applying to load-bearing areas. Apply over base coat of lacquer or acrylic paint. Accent Color paints may damage underlying base coat. Test before applying it onto the model. Take care when applying on flat base coat colors as Accent Color paints may permeate more readily.

UStar Scale Model Paint Bottle (Pack of 6) Size: 60ml Material: PET Features: mixing ball spill protection and sealing cap scale markings on the bottle for exact measurements Thickened and highly transparent PET material, which can prevent the corrosion of general water-based paint, lacquer-based paint, and enamel paint * PET is a plastic material. please do not store industrial-grade strong corrosive liquids to avoid bottle corrosion

Model: OTH-C108 Size: 9cm x 4cm x 1.3cm Polished on both sides. The green side is for fine sanding at #1000 grit and the white side is for polishing/buffing at #4000 grit.

Model: T09A17 Color: Red/Black/Blue/Gray 304 stainless steel blade collet, Brass chrome plated handle, All-aluminum lightweight body, low center gravity design for better handling Package Contains: Anti-rolling protection cap x 1 Galaxy Model Tools Modeler's Knife x 1 (random color) Bright & narrow edge replacement blades x 20

Shorter for better handling. Extra durable Each stick is labeled with its grit. Each grit is also laced with a different color in the middle of the stick. Size: 88mm x 20mm x 4mm This set comes with 4 sanding sticks: #400 x 1 - Red #600 x 1 - Blue #800 x 1 - Purple #1000 x 1 - White

Micro Sol setting solution is for the most difficult irregular surfaces to be found on models. It completely softens the Microscale Decal, allowing it to drape down onto the surface of the model, conforming perfectly to surface irregularities without distortion. The most amazing results in seemingly impossible places are possible because Micro Sol actually makes the decal part of the painted surface. For that reason, you should coat Micro Sol on for only a few seconds and then leave it alone. It does the work. Do not touch until the decal has dried, as the decal is very soft at this stage and could be easily damaged. For the best results, first, apply Micro Sol to prepare the surface and enhance the adhesive. Make sure the surface is free of particles that could get under the decal's film and cause a blemish. Then, when everything is dry enough that the decal will not move easily, apply Micro Sol with a small flat brush. Apply with as few strokes as possible so as not to disturb the decal. Then allow the decal to dry without disturbing it. One application is enough in most cases but, if necessary, a second application of Micro Sol can be helpful.

Micro Set is a very versatile decal setting solution that does several things to Microscale Decals to improve the application. Micro Set should be applied to the surface of the model where you will be sliding the decal off the paper backing. Micro Set prepares the surface with special wetting agents that cut the oils into new paint and convert the adhesive on the back of the decal to a stronger and longer-lasting one. In addition, Micro Set slightly softens the decal film to make it more flexible so that it will conform better to the model's surface. Better adhesion of the decal to the model prevents tiny air bubbles from forming and results in an invisible carrier film for the so-called "painted-on look." To apply Micro Set: Use a soft flat artist's brush and apply Micro Set where you are going to apply the decal. Then slide the decal off the backing paper using a small pointed tip synthetic bristle brush to carefully position the decal in its proper position. Blot the decal carefully with a tissue or paper toweling, being careful not to disturb its position. Allow the decal to dry overnight. It will then be ready for a protective coat of Micro Coat Flat, Satin, or Gloss.

Mr. Colour Leveling Thinner is an all-around outstanding thinner, for use with lacquer-based paints that contain a drying retarder. This makes the thinned paint slower drying meaning it has more time to spread and level to a smooth finish. This helps you create a much smoother surface and a higher gloss finish.

Mr.Mark Softer is a softening agent designed to be used with decals (slide marks). It enables decals to conform to rough and curved surfaces.How To Use Mr.Mark SofterFirst, apply a small drop of Mr.Mark Softer to the area where the decal will go using the brush attached to the bottle cap.Apply the decal over this area. Apply gentle pressure to the decal with a soft cloth, removing any excess liquid and ensuring that the decal is down fast.The decal will stick perfectly, even on uneven or curved surfaces.If air bubbles do get in between the decal and the model surface, allow the decal to dry, and then carefully prick the decal with a needle and insert Mr.Mark Softer through the resulting hole. The air will escape, and the decal will then stick down conforming to the surface of the plastic part.