All Products

Splash Paints 2K Ultra Clear Coat The Splash Paints 2K Ultra Clear is a two-component urethane clear coat designed for airbrush application as a final protective top coat on scale models, Gunpla, and 3D prints. Available in Gloss and Matte finishes, this high-solid clear coat provides enhanced self-leveling, increased UV stabilization, and zero clear coat shrinkage during curing. Each set includes a 30 ml (1 oz) clear coat bottle and a 10 ml (0.3 oz) catalyst bottle, mixed at a 3:1 ratio before application. Key Features Two-Component Urethane Formula: Requires mixing clear coat with included catalyst at a 3:1 ratio before spraying. High-Solid Clear Coat: Enhanced self-leveling properties produce an orange-peel-free finish. UV Stabilized: Rated for outdoor durability of 10+ years with no yellowing or degradation. No Shrinkage: Zero clear coat shrinkage during curing for a consistent final surface. Cut and Buff Compatible (Gloss): The 2K Ultra Gloss can be cut and buffed after curing without losing shine. Two Finish Options: Ultra Gloss for high-shine finishes and Ultra Matte for flat finishes. Cure Time: 48–72 hours at room temperature, or 60 minutes in a dehydrator at 120°F after cooldown. Application Notes (Gloss) 1st coat: Light coat. Flash off 5–10 minutes. 2nd coat: Medium to wet coat. Flash off 5–10 minutes. 3rd coat: Wet coat. Flash off 5–10 minutes. Application Notes (Matte) 1st coat: Tack coat. Flash off 5 minutes. 2nd coat: Wet coat. Flash off 5 minutes. Do not exceed 2 coats. Additional layers will make the surface glossy. Included Components Clear Coat: 30 ml (1 oz) Catalyst: 10 ml (0.3 oz) Specifications Brand Splash Paints Product Type 2K Urethane Clear Coat Formula Two-component (clear coat + catalyst) Application Airbrush only Mixing Ratio 3:1 (clear coat to catalyst); up to 0.5 parts thinner optional Clear Coat Volume 30 ml (1 oz) Catalyst Volume 10 ml (0.3 oz) Finishes Available Ultra Gloss, Ultra Matte Cure Time 48–72 hours at room temperature; 60 minutes in dehydrator at 120°F UV Rating 10+ years outdoor rated Country of Origin USA

Splash Paints 2K Urethane Primer The Splash Paints 2K Primer is a two-component urethane primer designed for airbrush application on scale models, Gunpla, and 3D prints. Available in White (SPP-001), Grey (SPP-002), and Black (SPP-003), this 2K primer provides superior durability and adhesion compared to single-component primers. Each set includes a 60 ml (2 oz) urethane primer bottle and a 15 ml (0.5 oz) urethane catalyst bottle, requiring thorough mixing before application. Key Features Two-Component Urethane Formula: Requires mixing primer with included catalyst before spraying for enhanced durability. Superior Surface Preparation: Apply over surfaces sanded to at least #800–#1000 grit for optimal adhesion. Fast Cure Time: 3–4 hours at room temperature, or 10–15 minutes at 140°F in a dehydrator. Sandable Finish: Wet-sand with #1500–2000 grit after curing for a smooth surface before basecoat application. Three Color Options: White, Grey, and Black to accommodate different basecoat color requirements. Recommended PSI: 20–30 PSI. Apply medium to wet coats in multiple passes. Recommended Nozzle Size: 0.35 mm or larger for primer application. Pot Life: Approximately 2 hours after mixing. Clean all product from airbrush immediately after use. Application Notes Coat 1: Medium wet passes. Coat 2: Wet passes. Coat 3: Additional wet passes if necessary. After curing, wet-sand the entire surface with #1500–2000 grit before applying any base coats. Catalyst contains isocyanate. An organic vapor respirator (such as 3M 60921) must be worn during use. Use in a well-ventilated area only. Product is flammable and must be kept away from all heat sources. Included Components Urethane Primer: 60 ml (2 oz) Urethane Catalyst: 15 ml (0.5 oz) Specifications Brand Splash Paints Product Type 2K Urethane Primer Formula Two-component (primer + catalyst) Application Airbrush only Primer Volume 60 ml (2 oz) Catalyst Volume 15 ml (0.5 oz) Colors Available White (SPP-001), Grey (SPP-002), Black (SPP-003) Thinning Required No (pre-thinned; catalyst mixing required) Recommended PSI 20–30 PSI Recommended Nozzle 0.35 mm or larger Cure Time 3–4 hours at room temperature; 10–15 minutes at 140°F in dehydrator Pot Life Approx. 2 hours after mixing Country of Origin USA

Splash Paints 2K Urethane Primer The Splash Paints 2K Primer is a two-component urethane primer designed for airbrush application on scale models, Gunpla, and 3D prints. Available in White (SPP-001), Grey (SPP-002), and Black (SPP-003), this 2K primer provides superior durability and adhesion compared to single-component primers. Each set includes a 60 ml (2 oz) urethane primer bottle and a 15 ml (0.5 oz) urethane catalyst bottle, requiring thorough mixing before application. Key Features Two-Component Urethane Formula: Requires mixing primer with included catalyst before spraying for enhanced durability. Superior Surface Preparation: Apply over surfaces sanded to at least #800–#1000 grit for optimal adhesion. Fast Cure Time: 3–4 hours at room temperature, or 10–15 minutes at 140°F in a dehydrator. Sandable Finish: Wet-sand with #1500–2000 grit after curing for a smooth surface before basecoat application. Three Color Options: White, Grey, and Black to accommodate different basecoat color requirements. Recommended PSI: 20–30 PSI. Apply medium to wet coats in multiple passes. Recommended Nozzle Size: 0.35 mm or larger for primer application. Pot Life: Approximately 2 hours after mixing. Clean all product from airbrush immediately after use. Application Notes Coat 1: Medium wet passes. Coat 2: Wet passes. Coat 3: Additional wet passes if necessary. After curing, wet-sand the entire surface with #1500–2000 grit before applying any base coats. Catalyst contains isocyanate. An organic vapor respirator (such as 3M 60921) must be worn during use. Use in a well-ventilated area only. Product is flammable and must be kept away from all heat sources. Included Components Urethane Primer: 60 ml (2 oz) Urethane Catalyst: 15 ml (0.5 oz) Specifications Brand Splash Paints Product Type 2K Urethane Primer Formula Two-component (primer + catalyst) Application Airbrush only Primer Volume 60 ml (2 oz) Catalyst Volume 15 ml (0.5 oz) Colors Available White (SPP-001), Grey (SPP-002), Black (SPP-003) Thinning Required No (pre-thinned; catalyst mixing required) Recommended PSI 20–30 PSI Recommended Nozzle 0.35 mm or larger Cure Time 3–4 hours at room temperature; 10–15 minutes at 140°F in dehydrator Pot Life Approx. 2 hours after mixing Country of Origin USA

Splash Paints 1K Acrylic Lacquer Primer The Splash Paints 1K Primer is a single-component acrylic lacquer primer designed for airbrush application on plastic model kits, resin parts, and 3D prints. Available in four colors — White, Light Grey, Dark Grey, and Black — the 1K Primer is a ready-to-use surfacer that fills scratches as fine as #800 grit and provides a smooth foundation for basecoat application. Each bottle contains 60 ml (2 oz) of pre-thinned primer with no catalyst or mixing required. Key Features Single-Component Formula: No catalyst or activator required. Ready to use directly from the bottle. Pre-Thinned and Airbrush-Ready: No additional thinning needed. Shake, load, and spray. Surfacer Capability: Fills scratches down to #800 grit for a smooth surface before basecoat application. Fast Dry Time: Ready to sand in under 2 hours at room temperature, or 5–10 minutes with a dehydrator. Air Dry Recommended: Heat cure at temperatures below 120°F if using a dehydrator. Ideal for Plastics and Resin: Formulated specifically for plastic model kits and resin media. Recommended PSI: 20–25 PSI. Apply wet layers for optimal film build. Recommended Nozzle Size: 0.35 mm or larger for primer application. Four Color Options: White, Light Grey, Dark Grey, and Black to suit different basecoat requirements. Application Notes Apply at least 2–3 coats for optimal film thickness prior to basecoat application. Flash off until matte between coats. Wet-sand with #1500–2000 grit before applying basecoat for a smooth finish. The White primer has an off-white finish; bright colors may require a pure white base coat after priming. A respirator must be worn during use. Product is flammable and must be kept away from all heat sources. Specifications Brand Splash Paints Product Type 1K Acrylic Lacquer Primer (Surfacer) Formula Single-component (no catalyst required) Application Airbrush only Volume 60 ml (2 oz) per bottle Colors Available White, Light Grey, Dark Grey, Black Thinning Required No (pre-thinned) Recommended PSI 20–25 PSI Recommended Nozzle 0.35 mm or larger Dry Time Under 2 hours at room temperature; 5–10 minutes with dehydrator Compatible Media Plastic, resin Country of Origin USA

Splash Paints 1K Acrylic Lacquer Primer The Splash Paints 1K Primer is a single-component acrylic lacquer primer designed for airbrush application on plastic model kits, resin parts, and 3D prints. Available in four colors — White, Light Grey, Dark Grey, and Black — the 1K Primer is a ready-to-use surfacer that fills scratches as fine as #800 grit and provides a smooth foundation for basecoat application. Each bottle contains 60 ml (2 oz) of pre-thinned primer with no catalyst or mixing required. Key Features Single-Component Formula: No catalyst or activator required. Ready to use directly from the bottle. Pre-Thinned and Airbrush-Ready: No additional thinning needed. Shake, load, and spray. Surfacer Capability: Fills scratches down to #800 grit for a smooth surface before basecoat application. Fast Dry Time: Ready to sand in under 2 hours at room temperature, or 5–10 minutes with a dehydrator. Air Dry Recommended: Heat cure at temperatures below 120°F if using a dehydrator. Ideal for Plastics and Resin: Formulated specifically for plastic model kits and resin media. Recommended PSI: 20–25 PSI. Apply wet layers for optimal film build. Recommended Nozzle Size: 0.35 mm or larger for primer application. Four Color Options: White, Light Grey, Dark Grey, and Black to suit different basecoat requirements. Application Notes Apply at least 2–3 coats for optimal film thickness prior to basecoat application. Flash off until matte between coats. Wet-sand with #1500–2000 grit before applying basecoat for a smooth finish. The White primer has an off-white finish; bright colors may require a pure white base coat after priming. A respirator must be worn during use. Product is flammable and must be kept away from all heat sources. Specifications Brand Splash Paints Product Type 1K Acrylic Lacquer Primer (Surfacer) Formula Single-component (no catalyst required) Application Airbrush only Volume 60 ml (2 oz) per bottle Colors Available White, Light Grey, Dark Grey, Black Thinning Required No (pre-thinned) Recommended PSI 20–25 PSI Recommended Nozzle 0.35 mm or larger Dry Time Under 2 hours at room temperature; 5–10 minutes with dehydrator Compatible Media Plastic, resin Country of Origin USA

Splash Paints 1K Acrylic Lacquer Primer The Splash Paints 1K Primer is a single-component acrylic lacquer primer designed for airbrush application on plastic model kits, resin parts, and 3D prints. Available in four colors — White, Light Grey, Dark Grey, and Black — the 1K Primer is a ready-to-use surfacer that fills scratches as fine as #800 grit and provides a smooth foundation for basecoat application. Each bottle contains 60 ml (2 oz) of pre-thinned primer with no catalyst or mixing required. Key Features Single-Component Formula: No catalyst or activator required. Ready to use directly from the bottle. Pre-Thinned and Airbrush-Ready: No additional thinning needed. Shake, load, and spray. Surfacer Capability: Fills scratches down to #800 grit for a smooth surface before basecoat application. Fast Dry Time: Ready to sand in under 2 hours at room temperature, or 5–10 minutes with a dehydrator. Air Dry Recommended: Heat cure at temperatures below 120°F if using a dehydrator. Ideal for Plastics and Resin: Formulated specifically for plastic model kits and resin media. Recommended PSI: 20–25 PSI. Apply wet layers for optimal film build. Recommended Nozzle Size: 0.35 mm or larger for primer application. Four Color Options: White, Light Grey, Dark Grey, and Black to suit different basecoat requirements. Application Notes Apply at least 2–3 coats for optimal film thickness prior to basecoat application. Flash off until matte between coats. Wet-sand with #1500–2000 grit before applying basecoat for a smooth finish. The White primer has an off-white finish; bright colors may require a pure white base coat after priming. A respirator must be worn during use. Product is flammable and must be kept away from all heat sources. Specifications Brand Splash Paints Product Type 1K Acrylic Lacquer Primer (Surfacer) Formula Single-component (no catalyst required) Application Airbrush only Volume 60 ml (2 oz) per bottle Colors Available White, Light Grey, Dark Grey, Black Thinning Required No (pre-thinned) Recommended PSI 20–25 PSI Recommended Nozzle 0.35 mm or larger Dry Time Under 2 hours at room temperature; 5–10 minutes with dehydrator Compatible Media Plastic, resin Country of Origin USA

Splash Paints Metalizer Series Lacquer Airbrush Paint The Splash Paints Metalizer Series is a line of ultra-fine metallic flake lacquer paints formulated for airbrush application on scale models, Gunpla, and 3D prints. Featuring 11 metallic colors including Aluminium, Gunmetal, Titanium, Gold, Copper, and Magnesium, the Metalizer Series produces realistic metal-like finishes with high pigment density. All Metalizer paints are pre-thinned, airbrush-ready, and supplied in 30 ml (1 oz) bottles with shaker balls. Key Features Ultra-Fine Metallic Flakes: Precision-sized particles produce realistic metal finishes suitable for scale modeling. High Pigment Density: Updated formula with increased pigment levels for enhanced coverage and color accuracy. Pre-Thinned and Airbrush-Ready: No additional thinning required. Shake, load, and spray directly from the bottle. Must Be Applied Over Black Base: Requires black primer or base coat for best results. Splash Paints 1K Black Primer, 2K Black Primer, or a gloss black base coat is recommended. Clear Coat Required: Without a gloss clear coat, metalizer colors may appear differently than intended. Recommended PSI: 25–30 PSI. Apply thin layers only and avoid wet coats. Recommended Nozzle Size: 0.3 mm airbrush nozzle for color application. Durable Finish: Metalizer finishes are handleable once cured. Application Notes Apply thin layers over black primer or base coat. Flash off until matte between coats. Avoid spraying wet coats. Light passes produce the best metallic effect. A gloss clear coat (such as Splash Paints 2K Ultra Clear) should be applied to protect the finish and achieve intended appearance. A respirator must be worn during use. Product is flammable and must be kept away from all heat sources. Specifications Brand Splash Paints Series Metalizer Series Paint Type Acrylic lacquer with metallic flakes Application Airbrush only Volume 30 ml (1 oz) per bottle Colors Available 11 Thinning Required No (pre-thinned) Recommended PSI 25–30 PSI Recommended Nozzle 0.3 mm Base Coat Required Yes (black primer or gloss black) Clear Coat Required Yes Country of Origin USA

Splash Paints Metalizer Series Lacquer Airbrush Paint The Splash Paints Metalizer Series is a line of ultra-fine metallic flake lacquer paints formulated for airbrush application on scale models, Gunpla, and 3D prints. Featuring 11 metallic colors including Aluminium, Gunmetal, Titanium, Gold, Copper, and Magnesium, the Metalizer Series produces realistic metal-like finishes with high pigment density. All Metalizer paints are pre-thinned, airbrush-ready, and supplied in 30 ml (1 oz) bottles with shaker balls. Key Features Ultra-Fine Metallic Flakes: Precision-sized particles produce realistic metal finishes suitable for scale modeling. High Pigment Density: Updated formula with increased pigment levels for enhanced coverage and color accuracy. Pre-Thinned and Airbrush-Ready: No additional thinning required. Shake, load, and spray directly from the bottle. Must Be Applied Over Black Base: Requires black primer or base coat for best results. Splash Paints 1K Black Primer, 2K Black Primer, or a gloss black base coat is recommended. Clear Coat Required: Without a gloss clear coat, metalizer colors may appear differently than intended. Recommended PSI: 25–30 PSI. Apply thin layers only and avoid wet coats. Recommended Nozzle Size: 0.3 mm airbrush nozzle for color application. Durable Finish: Metalizer finishes are handleable once cured. Application Notes Apply thin layers over black primer or base coat. Flash off until matte between coats. Avoid spraying wet coats. Light passes produce the best metallic effect. A gloss clear coat (such as Splash Paints 2K Ultra Clear) should be applied to protect the finish and achieve intended appearance. A respirator must be worn during use. Product is flammable and must be kept away from all heat sources. Specifications Brand Splash Paints Series Metalizer Series Paint Type Acrylic lacquer with metallic flakes Application Airbrush only Volume 30 ml (1 oz) per bottle Colors Available 11 Thinning Required No (pre-thinned) Recommended PSI 25–30 PSI Recommended Nozzle 0.3 mm Base Coat Required Yes (black primer or gloss black) Clear Coat Required Yes Country of Origin USA

Splash Paints Metalizer Series Lacquer Airbrush Paint The Splash Paints Metalizer Series is a line of ultra-fine metallic flake lacquer paints formulated for airbrush application on scale models, Gunpla, and 3D prints. Featuring 11 metallic colors including Aluminium, Gunmetal, Titanium, Gold, Copper, and Magnesium, the Metalizer Series produces realistic metal-like finishes with high pigment density. All Metalizer paints are pre-thinned, airbrush-ready, and supplied in 30 ml (1 oz) bottles with shaker balls. Key Features Ultra-Fine Metallic Flakes: Precision-sized particles produce realistic metal finishes suitable for scale modeling. High Pigment Density: Updated formula with increased pigment levels for enhanced coverage and color accuracy. Pre-Thinned and Airbrush-Ready: No additional thinning required. Shake, load, and spray directly from the bottle. Must Be Applied Over Black Base: Requires black primer or base coat for best results. Splash Paints 1K Black Primer, 2K Black Primer, or a gloss black base coat is recommended. Clear Coat Required: Without a gloss clear coat, metalizer colors may appear differently than intended. Recommended PSI: 25–30 PSI. Apply thin layers only and avoid wet coats. Recommended Nozzle Size: 0.3 mm airbrush nozzle for color application. Durable Finish: Metalizer finishes are handleable once cured. Application Notes Apply thin layers over black primer or base coat. Flash off until matte between coats. Avoid spraying wet coats. Light passes produce the best metallic effect. A gloss clear coat (such as Splash Paints 2K Ultra Clear) should be applied to protect the finish and achieve intended appearance. A respirator must be worn during use. Product is flammable and must be kept away from all heat sources. Specifications Brand Splash Paints Series Metalizer Series Paint Type Acrylic lacquer with metallic flakes Application Airbrush only Volume 30 ml (1 oz) per bottle Colors Available 11 Thinning Required No (pre-thinned) Recommended PSI 25–30 PSI Recommended Nozzle 0.3 mm Base Coat Required Yes (black primer or gloss black) Clear Coat Required Yes Country of Origin USA

Splash Paints Mecha Series Lacquer Airbrush Paint The Splash Paints Mecha Series is a line of high-concentrate pigment lacquer paints designed for airbrush application on scale models, Gunpla, and 3D prints. The Mecha Series includes 27 colors across two sub-ranges: the core MS Colors (MSO-001 through MSO-012) featuring mecha-inspired tones such as Mecha Red, Zeon Grey, and Titan Blue, and the EVA Colors (MSO-013 through MSO-027) featuring Evangelion-inspired shades including Eva Neon Green, Eva Midnight Purple, and Eva Proto Yellow. All Mecha Series paints are pre-thinned, airbrush-ready, and supplied in 30 ml (1 oz) bottles with shaker balls. Key Features High-Concentrate Pigments: Formulated for strong opacity with 1 coat for shading and 2 coats for full coverage. Pre-Thinned and Airbrush-Ready: No additional thinning required. Shake, load, and spray directly from the bottle. Lacquer-Based Formula: Safe to apply over most lacquer-compatible primer types. Fast Drying: Flash off until matte between coats for efficient multi-coat application. Recommended PSI: 20–25 PSI for optimal atomization and coverage. Recommended Nozzle Size: 0.3 mm airbrush nozzle for color application. Wide Color Range: 27 colors across MS Colors and EVA Colors sub-lines, covering core mecha tones and Evangelion-inspired palettes. Application Notes MS Colors (MSO-001 – MSO-012): Apply over grey or white primer for most colors. EVA Colors (MSO-013 – MSO-027): White or light grey primer is recommended for most colors; dark grey or black primer for select darker shades (MSO-015, MSO-022, MSO-025, MSO-026). A respirator must be worn during use. Product is flammable and must be kept away from all heat sources. Specifications Brand Splash Paints Series Mecha Series (MS Colors + EVA Colors) Paint Type Acrylic lacquer Application Airbrush only Volume 30 ml (1 oz) per bottle Colors Available 27 (12 MS Colors, 15 EVA Colors) Thinning Required No (pre-thinned) Recommended PSI 20–25 PSI Recommended Nozzle 0.3 mm Country of Origin USA

Splash Paints Mecha Series Lacquer Airbrush Paint The Splash Paints Mecha Series is a line of high-concentrate pigment lacquer paints designed for airbrush application on scale models, Gunpla, and 3D prints. The Mecha Series includes 27 colors across two sub-ranges: the core MS Colors (MSO-001 through MSO-012) featuring mecha-inspired tones such as Mecha Red, Zeon Grey, and Titan Blue, and the EVA Colors (MSO-013 through MSO-027) featuring Evangelion-inspired shades including Eva Neon Green, Eva Midnight Purple, and Eva Proto Yellow. All Mecha Series paints are pre-thinned, airbrush-ready, and supplied in 30 ml (1 oz) bottles with shaker balls. Key Features High-Concentrate Pigments: Formulated for strong opacity with 1 coat for shading and 2 coats for full coverage. Pre-Thinned and Airbrush-Ready: No additional thinning required. Shake, load, and spray directly from the bottle. Lacquer-Based Formula: Safe to apply over most lacquer-compatible primer types. Fast Drying: Flash off until matte between coats for efficient multi-coat application. Recommended PSI: 20–25 PSI for optimal atomization and coverage. Recommended Nozzle Size: 0.3 mm airbrush nozzle for color application. Wide Color Range: 27 colors across MS Colors and EVA Colors sub-lines, covering core mecha tones and Evangelion-inspired palettes. Application Notes MS Colors (MSO-001 – MSO-012): Apply over grey or white primer for most colors. EVA Colors (MSO-013 – MSO-027): White or light grey primer is recommended for most colors; dark grey or black primer for select darker shades (MSO-015, MSO-022, MSO-025, MSO-026). A respirator must be worn during use. Product is flammable and must be kept away from all heat sources. Specifications Brand Splash Paints Series Mecha Series (MS Colors + EVA Colors) Paint Type Acrylic lacquer Application Airbrush only Volume 30 ml (1 oz) per bottle Colors Available 27 (12 MS Colors, 15 EVA Colors) Thinning Required No (pre-thinned) Recommended PSI 20–25 PSI Recommended Nozzle 0.3 mm Country of Origin USA

Splash Paints Mecha Series Lacquer Airbrush Paint The Splash Paints Mecha Series is a line of high-concentrate pigment lacquer paints designed for airbrush application on scale models, Gunpla, and 3D prints. The Mecha Series includes 27 colors across two sub-ranges: the core MS Colors (MSO-001 through MSO-012) featuring mecha-inspired tones such as Mecha Red, Zeon Grey, and Titan Blue, and the EVA Colors (MSO-013 through MSO-027) featuring Evangelion-inspired shades including Eva Neon Green, Eva Midnight Purple, and Eva Proto Yellow. All Mecha Series paints are pre-thinned, airbrush-ready, and supplied in 30 ml (1 oz) bottles with shaker balls. Key Features High-Concentrate Pigments: Formulated for strong opacity with 1 coat for shading and 2 coats for full coverage. Pre-Thinned and Airbrush-Ready: No additional thinning required. Shake, load, and spray directly from the bottle. Lacquer-Based Formula: Safe to apply over most lacquer-compatible primer types. Fast Drying: Flash off until matte between coats for efficient multi-coat application. Recommended PSI: 20–25 PSI for optimal atomization and coverage. Recommended Nozzle Size: 0.3 mm airbrush nozzle for color application. Wide Color Range: 27 colors across MS Colors and EVA Colors sub-lines, covering core mecha tones and Evangelion-inspired palettes. Application Notes MS Colors (MSO-001 – MSO-012): Apply over grey or white primer for most colors. EVA Colors (MSO-013 – MSO-027): White or light grey primer is recommended for most colors; dark grey or black primer for select darker shades (MSO-015, MSO-022, MSO-025, MSO-026). A respirator must be worn during use. Product is flammable and must be kept away from all heat sources. Specifications Brand Splash Paints Series Mecha Series (MS Colors + EVA Colors) Paint Type Acrylic lacquer Application Airbrush only Volume 30 ml (1 oz) per bottle Colors Available 27 (12 MS Colors, 15 EVA Colors) Thinning Required No (pre-thinned) Recommended PSI 20–25 PSI Recommended Nozzle 0.3 mm Country of Origin USA

Splash Paints Mecha Series Lacquer Airbrush Paint The Splash Paints Mecha Series is a line of high-concentrate pigment lacquer paints designed for airbrush application on scale models, Gunpla, and 3D prints. The Mecha Series includes 27 colors across two sub-ranges: the core MS Colors (MSO-001 through MSO-012) featuring mecha-inspired tones such as Mecha Red, Zeon Grey, and Titan Blue, and the EVA Colors (MSO-013 through MSO-027) featuring Evangelion-inspired shades including Eva Neon Green, Eva Midnight Purple, and Eva Proto Yellow. All Mecha Series paints are pre-thinned, airbrush-ready, and supplied in 30 ml (1 oz) bottles with shaker balls. Key Features High-Concentrate Pigments: Formulated for strong opacity with 1 coat for shading and 2 coats for full coverage. Pre-Thinned and Airbrush-Ready: No additional thinning required. Shake, load, and spray directly from the bottle. Lacquer-Based Formula: Safe to apply over most lacquer-compatible primer types. Fast Drying: Flash off until matte between coats for efficient multi-coat application. Recommended PSI: 20–25 PSI for optimal atomization and coverage. Recommended Nozzle Size: 0.3 mm airbrush nozzle for color application. Wide Color Range: 27 colors across MS Colors and EVA Colors sub-lines, covering core mecha tones and Evangelion-inspired palettes. Application Notes MS Colors (MSO-001 – MSO-012): Apply over grey or white primer for most colors. EVA Colors (MSO-013 – MSO-027): White or light grey primer is recommended for most colors; dark grey or black primer for select darker shades (MSO-015, MSO-022, MSO-025, MSO-026). A respirator must be worn during use. Product is flammable and must be kept away from all heat sources. Specifications Brand Splash Paints Series Mecha Series (MS Colors + EVA Colors) Paint Type Acrylic lacquer Application Airbrush only Volume 30 ml (1 oz) per bottle Colors Available 27 (12 MS Colors, 15 EVA Colors) Thinning Required No (pre-thinned) Recommended PSI 20–25 PSI Recommended Nozzle 0.3 mm Country of Origin USA

Splash Paints Mecha Series Lacquer Airbrush Paint The Splash Paints Mecha Series is a line of high-concentrate pigment lacquer paints designed for airbrush application on scale models, Gunpla, and 3D prints. The Mecha Series includes 27 colors across two sub-ranges: the core MS Colors (MSO-001 through MSO-012) featuring mecha-inspired tones such as Mecha Red, Zeon Grey, and Titan Blue, and the EVA Colors (MSO-013 through MSO-027) featuring Evangelion-inspired shades including Eva Neon Green, Eva Midnight Purple, and Eva Proto Yellow. All Mecha Series paints are pre-thinned, airbrush-ready, and supplied in 30 ml (1 oz) bottles with shaker balls. Key Features High-Concentrate Pigments: Formulated for strong opacity with 1 coat for shading and 2 coats for full coverage. Pre-Thinned and Airbrush-Ready: No additional thinning required. Shake, load, and spray directly from the bottle. Lacquer-Based Formula: Safe to apply over most lacquer-compatible primer types. Fast Drying: Flash off until matte between coats for efficient multi-coat application. Recommended PSI: 20–25 PSI for optimal atomization and coverage. Recommended Nozzle Size: 0.3 mm airbrush nozzle for color application. Wide Color Range: 27 colors across MS Colors and EVA Colors sub-lines, covering core mecha tones and Evangelion-inspired palettes. Application Notes MS Colors (MSO-001 – MSO-012): Apply over grey or white primer for most colors. EVA Colors (MSO-013 – MSO-027): White or light grey primer is recommended for most colors; dark grey or black primer for select darker shades (MSO-015, MSO-022, MSO-025, MSO-026). A respirator must be worn during use. Product is flammable and must be kept away from all heat sources. Specifications Brand Splash Paints Series Mecha Series (MS Colors + EVA Colors) Paint Type Acrylic lacquer Application Airbrush only Volume 30 ml (1 oz) per bottle Colors Available 27 (12 MS Colors, 15 EVA Colors) Thinning Required No (pre-thinned) Recommended PSI 20–25 PSI Recommended Nozzle 0.3 mm Country of Origin USA

The Sheik Mainland 1/144 MAC18 Super Cavalry Wolf Spider Squad is a set of three multi-legged mecha model kits from the Ultra Action Trooper series. Each unit is based on a wolf spider (Lycosidae) motif, translating the predatory silhouette and low-profile stance of the arachnid into a compact tactical mech platform. Sheik Mainland (also known as Chief Continent / Chieftain Continent) is a Chinese manufacturer known for accessible, customization-friendly mecha kits with high parts compatibility across the 30MM and MSG ecosystems. Key Features Three Complete Mechs Per Box - Each box contains parts to build three individual wolf spider mech units, making this a squad-based kit out of the box. Three Weapon Types Per Unit - Each mech can be equipped with one of three weapon loadouts: rocket launcher, drone, or cannon. The kit includes five sets of each weapon type, leaving two spare sets after equipping all three mechs for custom dual-weapon configurations. Wolf Spider (Lycosidae) Design - Multi-legged mech silhouette based on the wolf spider, with a wrap-around front face panel that eliminates visible center seam lines. Snap-Fit ABS Construction - Molded in ABS plastic for tool-free snap-fit assembly. Seam lines are engineered to sit on the interior side of the body for a clean exterior finish. Customization-Ready Body - The rear and both side panels are suitable locations for drilling 3mm ports, enabling compatibility with 30MM, MSG, and other standard aftermarket accessory lines. Water Slide Decal Sheet Included - Comes with a decal sheet for additional military-style detailing across all three units. Multiple Color Versions Available - The MAC18 Wolf Spider Squad is available in multiple colorways. Select your preferred version from the dropdown menu. Builder Context The MAC18 Wolf Spider Squad is suited for beginners and experienced builders alike. Each individual mech takes approximately one hour to assemble with no tools or adhesive required. The small scale and low part count make this an accessible entry point for first-time builders, while the spare weapon parts and 3mm-compatible body panels give experienced customizers material to work with for kitbashing and custom loadout configurations. Why Build This Kit The Sheik Mainland MAC18 Wolf Spider Squad is one of the few 1/144-scale non-humanoid mecha kits currently available from any manufacturer, making it a distinctive display piece alongside standard bipedal Gunpla and third-party kits. At three units per box with five weapon sets, the kit offers genuine army-building value - builders can field a full squad from a single purchase or combine multiple color versions for a mixed-unit display. The weapon surplus (two extra sets of each type after equipping all three mechs) supports custom dual-cannon or dual-drone configurations without requiring additional purchases. For builders familiar with Bandai's 30 Minutes Missions line, the Wolf Spider occupies a similar customization-first philosophy at a lower price point and smaller footprint, though it trades the humanoid frame's poseability for a more static but visually unique spider-form factor. The wrap-around front panel design that eliminates the center seam line is a construction detail typically seen on more expensive kits. Box Contents Parts to build three wolf spider mech units Five weapon assemblies per type (rocket launcher, drone, cannon) Water slide decal sheet Collector card Instruction manual Brand Sheik Mainland Series Ultra Action Trooper - Super Cavalry Product Name MAC18 Super Cavalry Wolf Spider Squad Scale 1/144 Material ABS Set Contents 3 wolf spider mechs, 5 sets of 3 weapon types Assembly Snap-fit, no tools or adhesive required Approx. Build Time ~1 hour per unit Manufacturer Sheik Mainland Country of Origin China Age Recommendation 15+

MS General MG-01 Zhao Yun x Cheng Huang Ver. 2.0 Model Kit The MS General MG-01 Zhao Yun x Cheng Huang Ver. 2.0 is a 1/10 scale plastic model kit from MS General's Syokon-Ki series, themed around characters from Romance of the Three Kingdoms and Chinese mythology. This updated version of the original MG-01 release features Zhao Yun, reimagined as a mecha girl warrior, alongside her companion divine beast Cheng Huang. Ver. 2.0 introduces new equipment including the Longdan Spear and Guerrilla Cannon armament system, along with expanded customization options through multiple 3mm connector ports. Key Features Four Pre-Painted Faceplates: Zhao Yun includes four pre-painted interchangeable expressions plus blank faceplates, using a simple and efficient swapping mechanism. Longdan Spear (Dragon Gall Spear): Signature weapon featuring a metallic strip on the handle and 3mm ports on both sides, allowing combination with the Guerrilla Cannon armament. Guerrilla Cannon Armament: Modular floating cannon system with a dedicated display stand for showcasing different configurations. Cheng Huang Divine Beast Mecha: Full beast-form mecha with wide-range swivel joints on neck and limbs, telescopic shoulder mechanisms for enhanced articulation, and an extendable torso and tail for lateral movement. Dual-Use Cheng Huang System: Cheng Huang can serve as a rideable mount for Zhao Yun or transform into wearable armor for the character. Optional Rear Thruster: Cheng Huang includes an installable rear thruster unit with adjustable mounting direction. Extensive 3mm Port System: Multiple 3mm connection ports throughout the body and weapons enable DIY equipment customization and future expansion. Five Connector Types: Kit includes five varieties of connectors for free combination between the main body, Guerrilla Cannon armament, and Cheng Huang. Decals and Stickers: Includes metallic green and silver reflective stickers along with a large quantity of marking decals for the character, divine beast, and weapons. Box Contents Zhao Yun character body components Four pre-painted interchangeable faceplates and blank faceplates Interchangeable hand parts (PVC) Cheng Huang divine beast mecha components Armor set components Longdan Spear with metallic handle strip Guerrilla Cannon armament parts and display stand Rear thruster unit and connector parts Five types of expansion connectors Metallic green and silver reflective stickers Marking decal sheet Metal parts (spear handle strip, display stand screws) Display base Instruction manual Specifications Brand MS General Series Syokon-Ki (Romance of the Three Kingdoms) Model Number MG-01 Product Name Zhao Yun x Cheng Huang Ver. 2.0 Scale 1/10 Height Approx. 18 cm (Zhao Yun) Materials ABS, PVC, POM, metal parts Joint Material POM (runners C and Z) Product Type Plastic assembly model kit Recommended Age 15+ IP Original design (Chinese mythology / Romance of the Three Kingdoms)

TuWang (TW) DT008 Folding Light Wing Expansion Effect for 1/100 MGEX Strike Freedom The TuWang (TW) DT008 Folding Light Wing Expansion Effect is a third-party aftermarket accessory set designed for the Bandai MGEX 1/100 ZGMF-X20A Strike Freedom Gundam. This upgrade kit replaces the standard wing effect parts with expanded, foldable light wing components that reproduce the Strike Freedom's iconic "Wings of Light" in a larger, more dramatic form factor. Key Features Foldable Light Wing Design: The light wing components feature a folding mechanism, allowing the wings to be posed in both deployed and stowed configurations. MGEX Strike Freedom Compatibility: Engineered specifically for the Bandai MGEX 1/100 Strike Freedom Gundam (ZGMF-X20A). Not compatible with other Strike Freedom kit grades. Expansion-Scale Wings: Provides larger light wing effect parts compared to the stock MGEX kit wings, creating a more imposing display presence. Replacement Runner Parts Included: Some versions of this kit include replacement runner parts (G1, G21, G31, G43, and G45) for the base MGEX kit to ensure proper fitment with the expanded wings. Plastic Construction: Made from plastic material, consistent with standard Gunpla aftermarket accessories. Included Components Folding light wing expansion effect parts Mounting and connection components for MGEX Strike Freedom backpack Specifications Brand TuWang (TW) Model Number DT008 Scale 1/100 Compatibility Bandai MGEX 1/100 ZGMF-X20A Strike Freedom Gundam Material Plastic Product Type Aftermarket expansion effect accessory (assembly required) Country of Origin China Age Recommendation 12+ Note: The MGEX 1/100 Strike Freedom Gundam base kit is sold separately and is required to use this accessory set.

Aluminum Alloy Acrylic Display Case This Aluminum Alloy Acrylic Display Case is a modular, dust-proof display solution designed for model kits, figures, collectibles, and building block toys. Constructed from aluminum alloy framing with acrylic and PETG transparent panels, the case features magnetic door panels, a mortise-and-tenon joint system for tool-free stacking, and included sealing strips for full dust protection. Key Features Aluminum Alloy Frame: Durable aluminum alloy frame structure with a maximum load-bearing capacity of 700 kg. Available in black, gold, or silver frame colors. Magnetic Door Panels: Transparent panels attach magnetically for easy access with strong adhesion and high light transmission. Mortise-and-Tenon Joint System: Patented universal connector design allows assembly in any direction — top, bottom, left, right, front, and back — without distinguishing orientation. Modular Stackable Design: Cases can be oriented horizontally or vertically and stacked together to form a custom display cabinet. Length and height dimensions are interchangeable while maintaining stackability. Dust Sealing Strips: Included foam sealing strips can be applied to the door panel edges for a fully sealed, dust-proof enclosure. Stacking Clips Included: Dedicated clips are provided to secure stacked cases together for added stability. Semi-Assembled for Easy Setup: Ships in semi-assembled form with simplified installation steps. High-Clarity PETG Panels: Panels are made from high-toughness, high-transparency PETG material for clear, durable viewing. What's Included Aluminum alloy frame components Acrylic and PETG transparent panels Magnetic door panel(s) Foam sealing strips Stacking clips Specifications Frame Material Aluminum Alloy Panel Material Acrylic + PETG Frame Load Capacity 700 kg Door Type Magnetic attachment Joint System Mortise-and-tenon, universal direction Stackable Yes (horizontal and vertical orientation) Dust Protection Included sealing strips for full seal Assembly Semi-assembled, simplified installation Product Type Display case Preorder Notice: This item is currently on Preorder and will be shipped once available. Please be aware that cancelling a Preorder will incur a 25% restocking fee. For detailed information on our preorder and cancellation policies, please visit our FAQs page.

KOSMOS LED Light Set for MG 1/100 Gundam Vidar The KOSMOS LED Light Set for MG 1/100 Gundam Vidar is a third-party LED upgrade kit designed specifically for the Bandai MG 1/100 ASW-G-XX Gundam Vidar from Mobile Suit Gundam: Iron-Blooded Orphans. This light set adds multi-point illumination to the MG Vidar, enhancing its display presence with integrated LED modules. The set includes only the LED lighting components — the MG Gundam Vidar model kit and display stand are sold separately. Key Features Designed for MG Vidar: Custom-fit LED modules engineered specifically for the Bandai MG 1/100 ASW-G-XX Gundam Vidar kit. LED Upgrade Only: This product contains only the LED light set. The MG Gundam Vidar model kit, display stand, and any other items shown in promotional images are not included. KOSMOS Brand Quality: Produced by KOSMOS, a third-party manufacturer specializing in LED lighting systems for Gundam and mecha model kits. Box Contents KOSMOS LED light set modules for MG 1/100 Gundam Vidar Installation instructions Specifications Brand KOSMOS Product Type LED Light Set (aftermarket upgrade) Compatibility Bandai MG 1/100 ASW-G-XX Gundam Vidar Scale 1/100 Materials ABS, POM, PVC Series Mobile Suit Gundam: Iron-Blooded Orphans Model Kit Included No — LED light set only Preorder Notice: This item is currently on Preorder and will be shipped once available. Please be aware that cancelling a Preorder will incur a 25% restocking fee. For detailed information on our preorder and cancellation policies, please visit our FAQs page.

Ming Jiang Legend & Blue Whales 1/100 REA-03D Caracal Desert Tactics Mecha Model Kit The Ming Jiang Legend & Blue Whales 1/100 REA-03D Caracal Desert Tactics is a desert-themed variant of the REA-03 Lynx from the Blue Whale original mecha series. This version replaces the Lynx's military green with a full desert tactical color scheme and introduces structural upgrades that address the original kit's limited hip spread range, along with new tooling parts for reinforced assembly and an exclusive desert-themed water decal sheet. Ming Jiang Legend (MJZ Studio) is a Chinese manufacturer known for their Blue Whale line of original military-styled mecha kits, co-produced with Sunday Hobby / Blue Whales. Key Features Desert Tactical Color Scheme: Full recolor from the Lynx's military green to a desert sand and tan configuration designed for arid environment display themes. Structural Optimization: Revised hip and leg joint structure addresses the original Lynx's limited leg spread range, allowing wider stances and more dynamic ground-based poses. New Tooling Parts: Includes newly tooled reinforcement parts for improved structural integrity during and after assembly. LN-26 Ultra-Long-Range Sniper Railgun: Multi-mode shooting configuration with detailed barrel engravings and energy-flow surface patterns. Combined Maintenance Platform: Integrated maintenance and preparation platform with base bracket, robotic arm, and eight ground crew figures for hangar-style diorama displays. Exclusive Water Decals: Dedicated water decal sheet designed specifically for the Desert Tactics configuration. ABS + POM Construction: Main body uses ABS plastic with POM core joints for stable articulation and posing. Builder Context The REA-03D Caracal Desert Tactics is an intermediate-level snap-fit plastic assembly kit. No cement is required, though sanding nub marks and applying the included water slide decals will produce the best results. The build complexity and part count are comparable to Bandai MG-grade kits, and the included maintenance platform adds a diorama assembly element that extends the build time beyond a standard mecha kit. Why Build This Kit The Ming Jiang Legend REA-03D Caracal Desert Tactics is the recommended version of the REA-03 Lynx for builders who experienced or heard about the original's hip articulation limitations - the structural revisions in the Desert Tactics release directly address that issue. The desert color scheme gives the kit a distinct shelf identity separate from the Lynx, and the exclusive water decals mean completed builds are visually distinguishable even at a glance. At 1/100 scale with a 21.5 cm height to head, the Caracal has comparable shelf presence to a Bandai MG kit, but the included maintenance platform, robotic arm, and eight crew figures make it one of the few kits in this price range that ships as a complete diorama scene out of the box. Builders who already own the Lynx should note that aside from the color, structural fixes, and decals, the weapon loadout and accessory list are identical - this is not a new mecha design but an improved reissue in a different livery. Box Contents REA-03D Caracal Desert Tactics 1/100 mecha main body Mecha backpack x 1 Interchangeable hands x 3 pairs LN-26 ultra-long-range sniper railgun x 1 Beam rifle x 1 Combined maintenance preparation platform x 1 Base bracket x 1 Maintenance personnel figures x 8 Exclusive Caracal Desert Tactics water decal sheet x 1 Instruction manual Specifications Brand Ming Jiang Legend & Blue Whales / Sunday Hobby Series Blue Whale Model REA-03D Caracal (Desert Tactics) Scale 1:100 Height to Head Approx. 21.5 cm (8.5 in) Height to Shoulder Approx. 22.9 cm (9.0 in) Material ABS, POM Type Plastic assembly model kit Preorder Notice: This item is currently on Preorder and will be shipped once available. Please be aware that cancelling a Preorder will incur a 25% restocking fee. For detailed information on our preorder and cancellation policies, please visit our FAQs page.