All Products

GNT-0000/FS 00 Qan[T] Full Saber (aka 00 Qan[T] Full Saber, pronounced "Double-Oh Quanta Full Saber") is a variant of the GNT-0000 00 Qan[T]​ that appeared in Mobile Suit Gundam 00V: Battlefield Record. The 00 Qan[T] Full Saber is the 00 Qan[T] equipped with the GN Sword IV Full Saber equipment, which is supposed to function like the GNR-010 0 Raiser, to adjust the synchronization of GNT-0000 00 Qan[T]​'s twin drive system. However, since tests showed that the Qan[T]'s GN drives can be be fully synchronized without the need of adjustments, the GN Sword IV Full Saber became unnecessary and is not equipped on the suit even though it has been manufactured. Unlike the backpack-like structure used in the normal 00 Qan[T]​, a more traditional cone GN Drive chassis is used on the Full Saber. Both the GN Sword IV Full Saber and the GN Shield are physically connected to this alternate backpack in a style more reminiscent of its predecessor 00 Raiser. As a result, the GN Sword IV Full Saber on the right side can help to balance out the GN Shield on the left and thus maintain the suit's balance during combat. The 00 Qan[T] Full Saber setup is also equipped with two new weapons. First is the GN Sword IV, which can transform into 5 different modes for carrying different kinds of attacks. Second is the GN Gunblades, three dagger-like blades attached to the GN Sword IV which can be used in three different forms.

The ZGMF-X42S Destiny Gundam is the titular mobile suit of Mobile Suit Gundam SEED Destiny and was piloted by Shinn Asuka.

The MBF-P02 Gundam Astray Red Frame is a Mobile Suit in the Gundam SEED Astray series of manga, novel and photonovel. It is piloted by Junk Guild member Lowe Guele.

The GX-9901-DX Gundam Double X (aka Gundam DX, Double X, DX) is a mobile suit produced by the New United Nations Earth in After War Gundam X and piloted by Garrod Ran. The GX-9901-DX Gundam DX was created by mobile suit engineers of the newly formed New United Nations Earth (NUNE). NUNE recovered the wreckage of GX-9900 Gundam X used by Jamil Neate during the 7th Space War and transplanted some of its system to the new mobile suit dubbed Double X. Furthermore, as creating a completely brand new design was extremely difficult, the mechanics used the Gundam X as the base unit when developing the Double X.The Gundam Double X has an improved Satellite System, the "Satellite System Mk-II". It consisted of a larger reflector unit on its back with six panels, and several energy radiator plates on the limbs as part of the new improved cooling system to increase the microwave energy absorption. Accompanying this increase in energy storage capacity, the single-barreled Satellite Cannon was upgraded into the two-barreled Twin Satellite Cannon, allowing Double X to unleash destructive force several times that of the Gundam X. The power of the Twin Satellite Cannon was demonstrated when Garrod Ran used it to destroy the island of Zonder Epta in one shot, and shown again when used to destroy the Space Revolutionary Army's Colony Laser. As the old system transplanted from Jamil's Gundam X still contains his brain wave patterns, Double X can use the Twin Satellite Cannon without a Newtype as its pilot.The Gundam Double X is also equipped with two Hyper Beam Swords stored on its side skirt armor, two Head Vulcans, four Breast Launchers and can use custom-made weapons including the Buster Rifle and Defense Plate. Because of its similarities to the Gundam X, the Gundam Double X can dock with a support craft developed for the Gundam X called the GS-9900 G-Falcon. While docked with the G-Falcon, the Double X is unable to use some of its weapons, but has the ability to use the weapons equipped on the aft section of the G-Falcon. Also, while joined with the G-Falcon, the Gundam Double X is able to safely re-enter Earth's atmosphere.Like the Gundam X, the Double X had a security key in the form of a G-Controller that is needed to activate and control it. However, while the Double X has its own G-Controller, its base system is still the same as the Gundam X. This means that even without the Double X's G-Controller, it can still be operated by anyone who has an older-model G-Controller used with the Gundam X - as demonstrated by Garrod, who stole the Double X in this manner.

The GN-0000/7S 00 Gundam Seven Sword (aka 00 Gundam Seven Sword, 00 Seven Sword), is a weapons pack/equipment variation for the GN-0000 00 Gundam that appeares in the Mobile Suit Gundam 00V side story. It is later given a additional weapon and re-designated as GN-0000GNHW/7SG 00 Gundam Seven Sword/G. With Celestial Being (CB) rebuilding their organization after their defeat in A.D. 2308, they began development of the 3.5 and 4th generation Gundams. The lone 4th generation Gundam, the GN-0000 00 Gundam, had undergone continuous beta testing of its experimental Twin Drive System by members of CB's engineering team and Tieria Erde. The original 00 Gundam was made as a close combat mobile suit, normally equipped with its GN Sword II. However, CB soon realized that the 00's basic arms would not be enough to counter the rapidly advancing mobile suits developed by the Earth Sphere Federation. Taking inspiration from the GN-001 Gundam Exia's diverse Seven Sword System, CB engineers created the Seven Sword package for the 00 Gundam, improving the units effectiveness in close combat while also attempting to stabilize the Twin Drive System.The original Seven Sword System was designed specifically for the Gundam Exia. Armed with one GN Sword, two GN Blades, two GN Beam Sabers and two GN Beam Daggers, the package was meant bring out the full close combat fighting strength of the Exia. Coupled with the close combat fighting style of its Gundam Meister Setsuna F. Seiei, Exia served its role as the close combat Gundam prior to is disappearance after A.D. 2308. Seeking to do the same with the 00 Gundam, CB engineers incorporated a mix of technologies into the 00 Gundam's Seven Sword armament. Befitting its name, the 00 Gundam Seven Sword was armed with 7 close combat weapons; the experimental GN Katars, the standardized GN Beam Sabers, the long and short GN Sword IIs, and the large GN Buster Sword.The 00's GN Beam Sabers were significantly improved from the Exia's. Originally, Exia had a set of four beam blades, a pair of daggers and a pair of normal beam sabers. While they were helpful in a few situations, the sabers' lengths were non-adjustable for differing combat situations. With that in mind, CB engineers created the beam sabers to be adjustable in length, increasing their overall efficiency in combat.The GN Katars are mounted on the sides of the 00 Seven Sword's kneecaps, which must be exchanged with the standard white kneecaps to properly holster the weapons. The design is taken from the famous Indian weapon, as well as the 00's GN Shields. The GN Katars are meant as push daggers for stabbing into an enemy. To enhance their capabilities, CB engineers equipped the katars with GN Particle infused blade edges, consisting of the material used in GN Condensers. While attacking, the particles surrounding the katar are converted to heat, and the heat is transferred to the object the katar comes into contact with. However, the heat generated by the particles can be too much for the katars themselves to tolerate. The experimental weapons inspired a line of other condenser infused weaponry for the next generation of Gundams.Taking a design cue from the Exia's GN Blades, CB engineers created the GN Sword II Long and GN Sword II Short. While both swords are physical exaggerations of the aforementioned blades, they vastly differ in function. The GN Sword II is more of a traditional broadsword, able to switch between rifle and sword mode faster than the original Exia could. The long GN Sword II focuses on ranged combat, the only such weapon in the 00 Seven Sword arsenal to do so. The drawbacks are that the long sword uses more particles and a decreased rapid fire capability. In contrast, the GN Sword II short was developed analogous to the GN Short Blade from the Exia. The shortest sword in the Seven Sword armament, the Short Sword's blade tip is attached to a wire, which can be shot out towards an enemy and retracted quickly. Despite these armaments, the signature weapon of the Seven Sword arsenal is the GN Buster Sword.At nearly the same height as the 00 Gundam, the GN Buster Sword is a massive weapon which serves multiple purposes. CB engineer Ian Vashti analyzed the Buster Sword of a GNX-607T/AC GN-XII Sword captured by Fon Spaak in the sword's development. Normally stored on the left GN Drive mount, the GN Buster Sword can expand its frame to particle vents to create a massive GN Field. The scope of the field is so large that it can protect allied suits. When the sword is actively wielded, it is a top class melee weapon. Though the array of weapons were tailored to suit the fighting style of Setsuna F. Seiei, the Meister as well as his Gundam, had been missing during the Seven Swords' development. On top of that, the pack did not stabilize the highly unstable Twin Drive System, and a separate support unit, the GNR-010 0 Raiser, was given a higher priority than the Seven Swords. However, CB hadn't forgotten about the Seven Swords configuration.After the battle with the Innovators, the 00 Gundam had taken some damage, but the greater concern was the fact that its GN Drives were critically damaged in the duel between the GN-000 0 Gundam and the GN-001REII Gundam Exia Repair II. With the 5th generation Gundams in construction, CB developed a modified version of the 00 Gundam Seven Sword, the GN-0000GNHW/7SG 00 Gundam Seven Sword/G as a test-bed for future weapons and systems.

The RX-75 Guntank , also known as the RX-75-4 Guntank , is a mobile suit from the Mobile Suit Gundam television series.The RX-75 Guntank was the first prototype Earth Federation Forces mobile suit developed by Operation V. However, it was said to be closer to a tank rather than a mobile suit. A number of companies such as Takim and Hervic participated in its development. The Guntank had the torso and arms of a mobile suit, but possessed caterpillar treads for legs. Initially, it was designed to be piloted by a crew of two, with a gunner in the canopy-style cockpit on the head and a driver in another cockpit in the torso. However, it was later changed to be controlled by a single pilot in the canopy-style cockpit. Like all "Operation V" mobile suits, the Guntank used the Core Block System.Its reactor is a hybrid type of nuclear reactors and gas turbines, and its output is insufficient for powering beam weapons. The Guntank's main weapons are twin 120mm cannons, which are effective at long and medium ranges. Its arms have four-barrel missile launchers instead of hands, and they provided good cover fire against enemy tanks and aircraft, but are less effective against enemy mobile suits. A major flaw of the Guntank is its inability to turn its torso, making it difficult to aim the cannons at moving targets, as the Guntank must reposition itself. Another major flaw is that its design was primarily for ground combat, resulting in it having poor maneuverability in space.

The AMX-003 (MMT-1) Gaza-C is a mass-production transformable mobile suit first featured in the Mobile Suit Zeta Gundam and Mobile Suit Gundam ZZ anime series. The design was given an update and appears in the photo-novel/OVA Mobile Suit Gundam Unicorn. Like many mobile suits designed around the time of the Gryps Conflict, the Gaza-C line of mobile suits from Axis Zeon were built around the concept of a versatile transforming frame. Although the Gaza-C was approved and put into mass production, there were minor flaws in the design, and the manufacturing resources of the Axis asteroid was limited, so many of the Gaza-C's parts were recycled from older Gaza-A and Gaza-B construction mobile suits.Despite this, the Gaza-C was a successful design that provided an excellent balance of speed, maneuverability, and firepower for little cost and was the first mass-produced version of the Gaza-series. However, one major problem with the Gaza-C is that due to its flimsy construction, the mobile suit would literally fall apart after using its transformation systems only a few times; the average lifespan of a Gaza-C would be three combat missions. This flaw was remedied in later Gaza models.

The NRX-044 Asshimar is a transformable mobile armor introduced in Mobile Suit Zeta Gundam. It was most notably piloted by Buran Blutarch. Initially developed as an experimental transformable mobile armor at the Oakland Research Institute, the Asshimar was introduced before the Gryps Conflict and was used extensively by the Earth Federation Forces. It was the first mobile weapon to be able to fly in the Earth atmosphere on its own power without the help of a sub-flight system. Asshimar's development was initiated by the Earth Federation Forces as the NRX-044[R] Prototype Asshimar TR-3 [Kehaar] and later continued in form of the NRX-044 Prototype Asshimar TR-3 [Kehaar].Asshimar's design featured additional sub mono-eye sensors along with the main camera sensor. Because its range was restricted to within the Earth atmosphere, a thermonuclear jet engine is used as its main propulsion system. This system uses air for propellant, making it fuel-efficient while effectively giving the Asshimar an enhanced cruising capacity. The engine air intakes are located in the upper thighs of the leg units, which are mainly closed by shutters in its mobile suit mode. In addition, its mobile armor mode possesses excellent aerodynamics as a lifting body, allowing for long-haul flights. The head unit is equipped with a multiple antennas with differential pressure sensors. Its landing gear, which is provided in the chest armor and leg units, is used in conjunction with underside fuselage nozzles for hovering during take-off.While not as powerful as its prototype, the production model of the Asshimar was a formidable machine. With magnet coating technology being applied to its transformation system, the Asshimar was able to transform between its MS and MA modes in only 0.5 seconds. Also, it sported thick armor and was able to withstand most standard mobile suit firearms. However, the chest frame is left vulnerable to attack during transformation. The Asshimar was limited to fielding its custom large beam rifle which was mounted on the main body in MA mode, limiting its usefulness. Nevertheless the Asshimar proved to be a powerful, versatile, and deadly unit and was stationed on various Federation bases on Earth.In the manga Mobile Suit Zeta Gundam Define, it was redesigned by Kyoshi Takigawa. New features include an increase in height, folding wings on the legs, retractable twin machine guns in both forearms, and built-in missile racks on both shoulders. In addition, the large beam rifle was now stored on the side in MA mode (allowing two to be mounted), and mounted on the forearm in MS mode when not in use.

The MSM-03C Hygogg is a mass-produced amphibious mobile suit introduced in Mobile Suit Gundam 0080: War in the Pocket. Known pilots include Mikhail Kaminsky, Andy Strauss and Gabriel Ramirez Garcia of the Cyclops Team .Although the MSM-03 Gogg was one of the first true amphibious mobile suits, it was handicapped by several problems including being under-powered, limited armament, and poor performance on land. To address these shortcomings, the Hygogg was developed. Introduced at the end of the One Year War, this machine was designed from scratch and retained only its predecessor's basic concepts. The result was a smaller, lighter, compact, and more powerful machine equipped with an improved generator and better weaponry. Its agility and mobility in water and on land were also enhanced. Additionally, production costs were reduced due to the implementation of standardized parts, including the cockpit, derived from the United Maintenance Plan, which greatly enhanced repairs and servicing.The Hygogg's shoulder armor can flip down and its arms can be retracted to assume a streamlined form for improved underwater cruising, while an optional jet pack can be mounted on the back for short aerial mobility. Weapon wise, a pair of 120mm machine cannons are mounted in the waist, four torpedo launchers in the head, vice claws in the forearm, and its primary weapon is a pair of hand-mounted beam cannons similar to the Z'Gok series, allowing for better ranged attack. In U.C. 0096, Hygoggs used by a pirate faction had the beam cannons replaced with a pair of gatling guns.

The latest model to join Kotobukiya’s original Megami Device series in collaboration with the popular social game Alice Gear Aegis is everyone’s favorite actress, Mutsumi Koashi!As an added bonus, the kit comes with a present code to receive an item in the game.The character design was made by Pyramid, and the gear parts were designed by Fudirou. Also, Kanetake Ebikawa supervised the design of the gear being made into plastic models.All of the various gear such as the sniper and hammer are included with their complex game designs fully recreated for users to enjoy.As part of the Megami Device plastic model kit series, the model consists of the base “machinika” body designed by Masaki Apsy and a variety of unique armor and weapons for users to equip and enjoy.While making balance adjustments to the overall body, the distinctive ★4 costume has been perfectly recreated.Model Specifications:・The kit will include a present code for use in the game.・The kit includes three different pre-printed face parts.・The Tops Gear is fully recreated and the powerful shooting effect parts are made of clear plastic parts.・With the signature gear and the included sniper, spring-loaded hammer, etc., users can enjoy recreating various combat scenes.・The model can be assembled with her signature gear in “Armed Mode,” or without gear in “Unarmed Mode.”・Using the 3mm connection points on each part and the compatibility of the head, this model can be customized with existing M.S.G, Frame Arms, Frame Arms Girl, Hexa Gear, Sousai Shojo Teien, and Arcanadea series parts.・This kit includes decals for the eyes and other markings.© KOTOBUKIYA ©Masaki Apsy ©Toriwo Toriyama© Pyramid,Inc. / COLOPL,Inc.

Frame Arms Girl is a unique spin-off series that redesigns the robots of the original Frame Arms line as beautiful girls! The latest addition to the line is a new Gourai-kai Ver. 2 equipped with SAMURAI MASTER SWORD and EXPANSION ARMOR Type G!This model kit features newly redesigned color schemes! Materia’s leg parts are also included so users are able to equip EXPANSION ARMOR Type G shin armor on the model.Model Specifications:・ This model kit includes GOURAI-KAI Ver. 2, EXPANSION ARMOR Type G and Samurai Master Sword in brand new original colors.・ This kit includes Materia’s leg parts, allowing users to be able to also equip EXPANSION ARMOR Type G shin armor only with this model.・Three types of pre-printed face parts are included (looking forward, composed, shouting).・ Newly designed eye decals for the shouting face are included.・ Two unprinted face parts are included to use with decals. Create your favorite expression with the included decals.・ Decals are included to recreate GOURAI-KAI.The GOURAI-KAI Ver.2 base model is the same as previous versions.GOURAI-Kai Ver. 2 Base Model Specifications:・ This kit can recreate both GOURAI-KAI and GOURAI.・ The kit comes with four optional pieces of chest armor — two for GOURAI-KAI (medium and large) and two for GOURAI (medium and large) — in addition to the standard armor.・The kit includes five sets of PVC hand parts.・ Head parts that are compatible with 3mm connection points are included as well as extension parts with 3mm joints/connection points for the chest.・ The PVC hands are compatible with existing weapons from the M.S.G and Frame Arms series.・ The 3mm connection points on the arms and feet are compatible with equipment from the M.S.G and Frame Arms series.*1: This model kit does not include the pre-painted right-facing face part included with the previously released FRAME ARMS GIRL GOURAI-KAI Ver.2.*2: This model kit does not include the hair parts to display GOURAI-KAI without headgear included with the previously released FRAME ARMS GIRL GOURAI-KAI[WHITE] Ver.2. The decals will also partially differ from those included with FRAME ARMS GIRL GOURAI-KAI[WHITE] Ver.2.© KOTOBUKIYA

Frame Arms Girl Magatsuki is based on the Frame Arms model of the same name designed by ToMo and transformed into an original female character illustrated by E-ji Komatsu.And now, a variation kit of that Magatsuki, AYATSUKI, is born!A bonus pamphlet made by SB Creative is included with this model kit which includes special content such as an original illustration.Model Specifications:・This model’s gear is inspired by kunoichi (female ninja).・3 types of face parts are included that were pre-painted with tampography: Normal, Smirking and Flustered.・The standard hairstyle has been changed to a side ponytail but can be made into twintails. This model can also have short hair as well for a total of four types of back head parts being included in this kit.・Bangs without headgear are included.・A newly-sculpted kusarigama (chain-sickle) and short knives are included.・A rack specific for holding the short knives on the waist is included.・2 sets of the long sword “Tenkai” and short sword “Satsuga” are included.・Clear blade parts that include a special effect for both the long sword “Tenkai” and short sword “Satsuga” are included.・3 types of newly-designed armor for the abdomen are included.・The armor can be equipped using the same arrangement as MAGATSUKI.・The kit includes decals for the eyes and other markings.・The characteristic clear armor of Magatsuki is recreated with clear parts and has engravings carved underneath.・The 3mm joints on the additional armor parts enable this model to be assembled and customized into various forms besides the default.・A simple round base is included. The attachment parts can be moved up and down.・Optional joint parts for the thighs are also included.・Hip joint parts are also included.・The pop-out chest and shoulder joints can be moved, allowing for a wider range of movement.・Using the sliding joint on the hip and the pop-out joints on the thighs together will allow for a wider range of movement.・The hand parts are attached with a ball joint, allowing the hands to be posed in a variety of expressions.・The model kit includes five sets of PVC hand parts. The hands and their joints can be exchanged with other Frame Arms Girl model kits.・The 3mm connection points on the arms and feet are compatible with gear from the M.S.G and Frame Arms series.© KOTOBUKIYA

"Stylet XF-3 rejoins the Frame Arms Girl lineup with a new unarmed head part included! Frame Arms Girl is a unique spin-off series that redesigns the robots of the original Frame Arms line as beautiful girls! The latest addition to the line is a variation kit of Stylet XF-3 with additional parts included. This model is brought to life based on Takayuki Yanase’s mech design and Humikane Shimada’s character design. Model Specifications: ・This product is a variation kit that includes hair parts from Stylet XF-3 in unarmed mode. ・The head parts can be interchanged with models from the Sousai Shojo Teien and ARCANADEA series. ・ Expandable parts with 3mm connection joints/points are included for the chest. ・The kit includes three pre-painted face parts with different expressions: looking left/default expression, looking forward/shouting, and a smug expression with the eyes closed. ・The regular Stylet can also be recreated with this kit. ・The kit includes five sets of PVC hands with ball joints. ・The back booster can be transformed into a fighter aircraft. ・For the nose cone of the back boosters, users have two choices, the regular design or a drone design. ・The kit includes decals for the eyes and other markings. ・The PVC hands are compatible with existing weapons from the M.S.G and Frame Arms series. ・The 3mm connection points on the arms and legs are compatible with existing weapons and armor from the M.S.G, Frame Arms and HEXA GEAR series. [What is Frame Arms Girl?] Frame Arms Girl is a spin-off series of Kotobukiya's original Mecha series ""Frame Arms"" that shows all the Mechas as adorable girls. The color-coded color scheme and face parts printed via tampography allow the model to be assembled with no painting required. The 3mm connection points and PVC hands characteristic of the Frame Arms series allow users to use a vast array of M.S.G Weapon Units, as well as weapons and armor from the Frame Arms series. The head, arms, legs, and other parts are compatible with the Frame Arms Girl models scheduled for release in the future, allowing users to further customize their own Frame Arms Girl models. *Please be aware that some product images may contain separately sold products as customization examples."

The Shield Liger (RZ-007) (シールドライガー Shīrudo Raigā) is a Lion-type Zoid featured prominently throughout the Zoids universe. The Shield Liger plays a central role in Zoids: Chaotic Century, and appears in some fashion in most of the anime series, manga, and video games. The Shield Liger's is the opposite of the Zaber Fang, mechanically the two designs share a number of components.Fast and agile in its day, the Shield Liger's performance has been exceeded by more modern Zoids. However, the Shield Liger remains a capable and versatile Zoid.The Shield Liger's most distinctive feature is the Energy Shield built into its mane that gives it its name. The Shield Liger was the first Zoid to use an Energy Shield, at the time giving it an unparalleled advantage. The Shield covers the Liger's forward half, protecting it from enemy weapons fire. In addition to a defensive measure, the Shield can also be utilised for high-speed ramming attacks.The Shield Liger would also serve as the basis of the Blade Liger design.

The Geno Breaker (ジェノブレイカー, Jeno Bureikā) (EZ-034) is a Tyrannosaurus-type Zoid, and one of over 200 species of biomechanical lifeforms depicted by TOMY's Zoids franchise. Based on the Geno Saurer, the Geno Breaker was first released in 2000, and the Zoid plays a significant role in both the Battle Story and the Zoids: Guardian Force anime. The Geno Breaker is a main rival to the Blade Liger.Designed for speed and mobility, instead of back-mounted cannons like in the Geno Saurer the Geno Breaker has a large thruster pack, allowing the Zoid limited flight capability. The pack also is equipped with a large pair of multi-purpose claws mounted on extendable mechanical arms known as X-Breakers.Besides serving as close combat weapons, the X-Breakers are heavily armoured, allowing them to be used as shields. There are no cannons like on Geno Saurer's nose, but instead the Geno Breaker features a retractable Laser Charging Blade.Its Charged Particle Cannon can now be fired from the air, with the Breaker countering the recoil of the blast with its boosters, as well as in any direction the pilot wishes, be it on the ground or in the air.For all its strengths, the Geno Breaker's specialised design leaves it lacking rear protection[citation needed], as all of its weapons are fixed facing forwards.In the anime, the Geno Breaker (as well as the earlier Geno Saurer) is depicted with an additional weapon. It is able to launch its hands on long, retractable cables like grappling hooks to grab and restrain Zoids at a distance, and pull them into its line of fire. However, unlike the Geno Saurer, the Geno Breaker was never depicted as being able to deliver an electrical shock through the claws. The anime also depicts the Geno Breaker with an Energy Shield, which it deploys by linking together the tips of its X-Breakers.

The Pteras (RZ-010) (プテラス originally named the Puterasu) is a Pterosaur-type of Zoid, a one of over 200 species of bio-mechanical lifeforms that form the Zoids race depicted in TOMY's Zoids Franchise. The Pteras uses Magnesser Wing technology to provide lift and propulsion. These wings use magnetic repulsion to lift the Zoid and move it once airborne. This system makes the Pteras very easy to learn and operate.The Pteras' weapons load primarily consists of missiles for both air and ground attack. If its missiles are depleted, the Zoid is left with a single small cannon for defense, making it rather vulnerable in longer engagements. Its speed and agility is somewhat lacking, when compared to most other airborne Zoids. However, the Pteras does have some ground capability.

The Rev Raptor (レブラプター EZ-027) (also stylized as Rev Rapter) is a Velociraptor-type of Zoid affiliated with the Guylos Empire, and is one of over 200 species of bio-mechanical lifeforms that form the Zoid race depicted in TOMY's Zoids franchise. The Rev Raptor possesses a considerable array of melee weapons for a Zoid of its size, but lacks any ranged weapons by default. As a result, it is often at a disadvantage against theoretically weaker Zoids, such as the Godos or Guysak. However, should it get in close it can defeat theoretically stronger Zoids. They work best in masses and in the Battle Story, a pack of Raptors were able to collectively take down a much larger Gojulas.Many variants of the Rev Raptor exist, which do feature the addition of ranged weapons.

Raven Raptor has joined Kotobukiya's world of HMM "Zoids," fully equipped with brand new armor and a Pile Bunker unit! The massively sized weapons don't compromise the awesome movability and velociraptor-like poses. The cockpit hatch on the head can be opened and closed, allowing for a pilot figure to be placed inside. The Zoid Core inside the torso can be removed. In addition to having a symmetrical design for the left and right side of the upper arms, 3mm connection points are added to the elbows for fans to have the option of adding hardpoints to this model when assembling. And don't forget about those "Counter Scythes" on the model's back! Order this awesome addition to the "Zoids" line-up today!

The Liger Zero (ライガーゼロ Raigā Zero) is a Lion-type Zoid, one of over 200 species of bio-mechanical life forms that form the Zoid race, providing the basis for TOMY’s Zoids franchise. It is the protagonist Zoid and Hero Zoid in both the Zoids: New Century and Zoids: Fuzors anime series.The Zero also features in both the Chaotic Century and New Century manga series and played a role in the Battle Story. As a model, it was the centre of Hasbro's marketing campaign in the early 2000s, making it one of the most widely recognisable Zoids of the franchise.

Preorder Details Manufacture Estimated Release: Late Aprile of 2023 Our Estimated Delivery:  Early/Mid Summer 2023 Grade: N/A Scale: N/A Please read our Preorder FAQ carefully before placing the order.