All Products

The RGC-83 GM Cannon II is a mobile suit introduced in the OVA Mobile Suit Gundam 0083: Stardust Memory. The successor of the RGC-80 GM Cannon, a medium-range support mobile suit developed in the late stage of the One Year War, the RGC-83 GM Cannon II was based on the RX-77D Guncannon Mass Production Type and inherited the Chobam Armor concept of the RX-78NT-1 Gundam NT-1. It was the culmination of the Federation's artillery support mobile suit development.Thanks to improvement in technology and productivity, the GM Cannon II was installed with a powerful generator, allowing it to be equipped with two shoulder-mounted beam cannons. This made it the first mass production unit to have high-powered beam cannons. These beam cannons were usually powered by the generator itself, but could also be powered by the two Energy CAP mounted on its backpack. A sighting device located on the pilot seat's headrest can be used to aim the beam cannons. For precision shooting under gravity, the stabilized gear on the waist could be deployed to stabilize the machine.The GM Cannon II's other weapons included a pair of head-mounted 60mm vulcan guns, a shortened beam saber stored in the left forearm, and the same GM Rifle and shield used by the RGM-79N GM Custom. Due to its role as a fire support mobile suit, the beam saber was only meant for close-quarters self-defense and it rarely had the chance to use it. The GM Cannon II also has relatively poor mobility due to the mass of its weapons and armor.The design of the GM Cannon II's basic components prioritized parts interchangeability with GM type mobile suits. Parts of its exterior was covered in composite armor, similar to the Chobam Armor used by the RX-78NT-1 "Alex". This composite armor improved bullet resistance while keeping the mobile suit's weight down. Unlike the Alex's Chobam Armor, the composite armor was built directly onto the frame and could not be purged when damaged. Despite their structural differences to Alex's armor, the composite armor was often referred to as "Chobam Armor" for convenience.Like the GM Custom, there was a plan to mass produce the GM Cannon II, but due to issues such as cost and the fact that the machine was meant to operate alongside the GM Custom, only a few units were actually deployed. After the Delaz Conflict, the project itself, including its development staff, was placed under the control of the Titans. The GM Cannon II's production was halted and a direct successor to it was never developed.

The RGM-86R GM III is a mass-production general-purpose mobile suit introduced in the anime Mobile Suit Gundam ZZ. Its design was later updated for the novel and OVA Mobile Suit Gundam Unicorn. A mass-produced mobile suit of the Earth Federation Forces developed in accordance with the "GM III Plan" as a successor to the GM II. It was deployed as the main unit during the First Neo Zeon War. By actively introducing new technologies while maintaining productivity, some specs have acquired performance equal to or higher than Gundam Mk-II's. Its backpack is a mass production model of the Gundam MK-II's, and mobility and maneuverability have exceeded the level of existing mass production machines. Although this backpack has a slightly different shape, it maintains the same functions as the Mk-II's while improving cost performance, and the docking mechanism with the FXA-05D G-Defenser remains. The shoulders and waist can be equipped with missile pods and missile launchers, respectively, allowing the GM III to function as an MS for medium- and long-range support.

The LM314V21 Victory 2 Gundam (aka Victory 2, V2) is the successor of the LM312V04 Victory Gundam featured in Mobile Suit Victory Gundam. Its development involves Myra Miggelle, wife of Hangerg Ewin, one of the founding members of League Militaire. It is piloted by Üso Ewin. Developed from the LM312V04 Victory Gundam, the Victory 2 (V2) Gundam was the newest Gundam produced by the League Militaire as their new symbol, replacing the older Victory Gundam. Nevertheless it shared many similarities with its predecessor, most notably the Core Block System, in which the V2's body is consisted of a Core Fighter (also known as V2 Core Fighter) attached to the suit's upper and lower body. This allowed damaged parts to be quickly and easily swapped out in the middle of battle. The V2 Core Fighter can also combined only with the upper body (also known as V2 Top Limb, or "Hanger" as it was informally known) or the lower body (also known as V2 Bottom Limb or "Boots") to form the V2 Top Fighter and the V2 Bottom Fighter respectively.Its armaments were mostly identical to the original Victory as well, although most of its systems were upgraded to better combat the newer mobile weapons being produced by the Zanscare Empire. Like its two predecessors, the V2 could also be outfitted with a variety of equipment to adapt to different mission roles. These upgrades typically saw the V2 outfitted with additional armor or extra weapons (or both).The most important upgrade, however, was the Minovsky Drive System, which was derived from the Victory Gundam's Minovsky Flight System and provided the unit with unparalleled power and maneuverability. This system allowed the V2 to fly in space without the use of conventional rocket thrusters (though some were still incorporated for maneuvering) and achieve incredible speeds. If used on Earth, the Minovsky Drive allowed the V2 to hover in mid-air without additional support, a significant advantage over the beam rotor technology used by Zanscare's mobile suits.The Minovsky Drive can also be used for both offensive and defensive purposes, sometimes simultaneously. The system's high-energy exhaust plumes manifested as a giant pair of wings ("Wings of Light"), which could be used as either gigantic beam sabers or as massive beam shields to shield both the Gundam itself and other targets. The defensive ability of the Wings of Light is nigh-unbreakable, if not absolute: not even the ZMT-S29S Zanneck's beam cannon, which could hit targets on Earth from high in the atmosphere, could penetrate them.

The FA-78-3 Full Armor 7th Gundam is a mobile suit introduced in M-MSV. It was later redesigned and appears in the video game Mobile Suit Gundam: Battlefield Record U.C. 0081. The FA-78-3 Full Armor 7th Gundam is the additional armor-equipped version of the RX-78-7 7th Gundam. Unlike the previous FA-78-1 Full Armor Gundam, the Full Armor 7th Gundam is able to fight without any drop in performance. This is accomplished with the addition of built-in sub-generators and propellant tanks in the Full Armor components. The emphasis of the Full Armor components is offensive power rather than defensive power. In addition, the tail stabilizer on the rear waist, which is the mass center of the MS, act as an AMBAC device and dramatically improved the unit's acceleration capability.

The RX-178 Gundam Mk-II is a mobile suit introduced in the anime series Mobile Suit Zeta Gundam. It is a successor of the famous RX-78-2 Gundam that served in the One Year War. A direct descendant of the RX-78-2 Gundam developed by the Titans, the Gundam Mk-II is the first mobile suit to utilize the new movable frame concept. In this new concept, rather than merely serving as a structural framework, the movable frame incorporates all the mobile suit's vital mechanisms, including the actuators and control systems required for movement, and excludes the mobile suit's weapons, armor, and propellant tanks. This approach dramatically improves the mobile suit's responsiveness, reliability, and energy efficiency, as well as making it far more agile than traditional designs.Another characteristic of the Gundam Mk-II is that some of its legs' movable parts are exposed and this design feature is based on the prevailing idea at that time that avoiding being hit by the enemy is the preferable choice. The origin for this idea is because no existing armor can fully protect against beam weaponry, thus it is better to increase the mobile suit's mobility by weight reduction rather than equip more armor which would lead to a higher weight and lower mobility.The mobile suit also has what had become the standard 360-degree panoramic screen and linear seat fitted in a circular cockpit that also functions as an escape pod. The multiple panels of the panoramic screen make up a single 360-degree display, covering the entire inner surface of the cockpit. The image displayed on this screen is a computer simulation constructed from the cameras distributed around the mobile suit's exterior. The viewpoint is that of the mobile suit's head, and the image is carefully edited to remove the mobile suit itself. The linear seat is suspended in the center of the cockpit, supported by a linear arm which electromagnetically counters G-forces and impact shocks in order to protect the pilot. Together, the panoramic screen and the linear seat gives the pilot a larger field of view and eliminates blind spots.The most notable flaw of the Gundam Mk-II is that it is armored using the obsolete titanium alloy ceramic composite. Another flaw is that the movable frame's leg sections have rigidity issues associated with the strength of the structural material used, and this problem persisted even after six design revisions. Despite this, for a brief time period, the Gundam Mk-II's movable frame makes it one of the most agile mobile suits available. Three Gundam Mk-II were produced in total. They were later stolen by the Anti-Earth Union Group (AEUG) and given a new paint scheme. Despite being used by two different factions, the Gundam Mk-II's weaponry remains mostly unchanged. Its only fixed weapons are two beam sabers, but it can carry a vulcan pod, a shield, a beam rifle, a hyper bazooka and a clay bazooka if necessary.

The MSJ-121 Demi Trainer (デミトレーナー Demitorēnā?) is a mobile suit introduced in Mobile Suit Gundam the Witch from Mercury. Demi Trainers were developed for students of the Asticassia School of Technology, a school created for training personnel in the space development industry. The unit's design is stripped of all superfluous components, affording it superb maneuverability and serviceability. The MS can be modified by anyone with basic technical knowledge, giving it excellent potential for customization. In addition to these facets, Demi Trainers are said to be the best choice for those learning to pilot, making them an obvious choice for students at the school. If asked which MS they felt most comfortable with, students are most likely to answer, "Demi Trainer".

Mat size.  18 x 12inches, Grid size: 16 x 10inches, thickness 3MM. Perfect for small, medium and large craft and sewing projects ACCURATE CUTTING.  double side with inch grids and different angles 30°45°and 60° that will greatly help the cutting process PERFECT GIFT for CRAFTERS and HOBBYISTS. Highly RECOMMENDED by crafters, quilters, and hobbyists

Introducing a cutting mat; another must-have item for building scale models. The contrast of the black and white color enhances its visual clarity. The lines on the mat can be seen through Mr. MASKING TAPE, so you can cut Mr. MASKING TAPE precisely without any other tools. 　 From 1/12 to 1/700 scales are printed along 4 sides. A3 size is suitable for cutting large sheets. Various patterns are printed on the mat. Made of PVC, 2mm thickness.

 The XXXG-01H Gundam Heavyarms (aka Heavyarms or Gundam Zero-Three) is a mobile suit from the TV anime Mobile Suit Gundam Wing. It was the third of Operation Meteor's five Gundams, and was piloted by a young man operating under the pseudonym Trowa Barton. Created by Gundam Scientist Doktor S, the Heavyarms was developed in the L3 Colonies under the financial support of the Barton Foundation. The Heavyarms is a long-range attack unit with a variety of built-in firearms. Its design is a combination of the firepower aspect of the Wing Gundam Zero with an emphasis on overwhelming suppressive fire. Its overall firepower is comparable to 3 to 5 battleships', but its attack power drops drastically once it run out of ammunition. However, with the skilled circus performer Trowa's excellent piloting sense, the Heavyarms is capable of acrobatic melee combat.

The Nissan Z,[3] known in Japan as the Nissan Fairlady Z (Japanese: 日産・フェアレディZ, Hepburn: Nissan Fearedi Zetto), is the seventh generation of the Z-car line of sports cars manufactured by Nissan. The model succeeded the 370Z, though is built on a modified and revised version of the previous generation's platform.[4] The model also drops the numerical nomenclature of the previous generations.The seventh-generation of the Z-car was introduced in August, 2021, the car uses Nissan's VR30DDTT engine and built on an evolution of Nissan FM Z34 platform, reason being codenamed as, "RZ34".

The VF-0S Phoenix is a variable fighter that appears in the Macross Zero OVA. The Northrop Grumman/Bellcom VF-0 Phoenix variable fighter was an advanced prototype for the VF-1 Valkyrie which served as a flight test unit and later in 2008 as a front-line fighter, before the Valkyrie's mass production in November 2008. The fighter was developed with OverTechnology obtained from the massive alien space ship that crashed on Earth in the year 1999.In most respects, the VF-0 resembled the VF-1 Valkyrie, although its legs were longer because the EGF-127 conventional turbofan engines used by the fighter were larger and bulkier than the VF-1's FF-2001 thermonuclear engines/ Numerous fine details also differ, such as head designs. The VF-0D's wings are very different, replacing the variable sweep wings with a canard-delta configuration; although this would perform well, it would ultimately not be adopted for the production series VF-1.

The VF-0S Phoenix is a variable fighter that appears in the Macross Zero OVA. The Northrop Grumman/Bellcom VF-0 Phoenix variable fighter was an advanced prototype for the VF-1 Valkyrie which served as a flight test unit and later in 2008 as a front-line fighter, before the Valkyrie's mass production in November 2008. The fighter was developed with OverTechnology obtained from the massive alien space ship that crashed on Earth in the year 1999.In most respects, the VF-0 resembled the VF-1 Valkyrie, although its legs were longer because the EGF-127 conventional turbofan engines used by the fighter were larger and bulkier than the VF-1's FF-2001 thermonuclear engines/ Numerous fine details also differ, such as head designs. The VF-0D's wings are very different, replacing the variable sweep wings with a canard-delta configuration; although this would perform well, it would ultimately not be adopted for the production series VF-1.

The MSN-06S Sinanju (aka Sinanju) is a mobile suit featured in the Mobile Suit Gundam Unicorn novel, its OVA adaptation and the television re-cut. A modified version of the MSN-06S Sinanju Stein, it was piloted by Full Frontal. Originally the MSN-06S Sinanju Stein developed by Anaheim Electronics as part of the Earth Federation's "UC Project", its movable frame is partly made from Psycho-Frame materials. This mobile suit was then stolen and modified into the MSN-06S Sinanju by the Neo Zeon remnant group known as "The Sleeves", and became the personal machine of the group's leader, Full Frontal.All of the Gundam-like features (except for the head-mounted vulcan guns) in the Sinanju Stein have been replaced with a Zeonic design and weaponry. Painted in crimson and with gold engraving, the Sinanju looks like the emblem of the Neo Zeon forces embodied. This decoration not only strengthens the armor, but is also said to be a design that is meant to control the organization known as the Neo Zeon remnants. The Sinanju Stein was an experimental machine, so there were some concerns about the armor's resistance to elasticity, but in order to increase the pilot's survival, the beam coating was strengthened from the two-layer structure used in most conventional MS to a five-layer structure, and the entire cockpit block was covered with Luna Titanium X material, and the Sinanju's armor has been strengthened as flagship machine.The Sinanju is also equipped with thrust deflector thrusters shaped like the large wings of a bird of prey, and flexible thrusters on the left and right sides of both legs and shins. Together with the numerous thrusters located all over its body, it is capable of acrobatic maneuvering combat that is impossible for a normal MS to achieve. With its overwhelming combat ability, crimson body, and mono-eye sensor, the Sinanju reminds all who see it of the legendary "Red Comet".

The MSN-06S Sinanju (aka Sinanju) is a mobile suit featured in the Mobile Suit Gundam Unicorn novel, its OVA adaptation and the television re-cut. A modified version of the MSN-06S Sinanju Stein, it was piloted by Full Frontal. Originally the MSN-06S Sinanju Stein developed by Anaheim Electronics as part of the Earth Federation's "UC Project", its movable frame is partly made from Psycho-Frame materials. This mobile suit was then stolen and modified into the MSN-06S Sinanju by the Neo Zeon remnant group known as "The Sleeves", and became the personal machine of the group's leader, Full Frontal.All of the Gundam-like features (except for the head-mounted vulcan guns) in the Sinanju Stein have been replaced with a Zeonic design and weaponry. Painted in crimson and with gold engraving, the Sinanju looks like the emblem of the Neo Zeon forces embodied. This decoration not only strengthens the armor, but is also said to be a design that is meant to control the organization known as the Neo Zeon remnants. The Sinanju Stein was an experimental machine, so there were some concerns about the armor's resistance to elasticity, but in order to increase the pilot's survival, the beam coating was strengthened from the two-layer structure used in most conventional MS to a five-layer structure, and the entire cockpit block was covered with Luna Titanium X material, and the Sinanju's armor has been strengthened as flagship machine.The Sinanju is also equipped with thrust deflector thrusters shaped like the large wings of a bird of prey, and flexible thrusters on the left and right sides of both legs and shins. Together with the numerous thrusters located all over its body, it is capable of acrobatic maneuvering combat that is impossible for a normal MS to achieve. With its overwhelming combat ability, crimson body, and mono-eye sensor, the Sinanju reminds all who see it of the legendary "Red Comet".

The MSN-04 Sazabi is a mobile suit introduced in Mobile Suit Gundam: Char's Counterattack. It is piloted by Char Aznable. After Char Aznable returned as the leader of his own Neo Zeon faction in U.C. 0093, he ordered his engineers to create a new mobile suit which would fit his piloting skills and Newtype powers. The result was the MSN-04 Sazabi, which was later built by the Luna-based contractor Anaheim Electronics . With an overall height of 25.6 meters, the Sazabi is much bigger than most standard mobile suits, but thanks to the use of lightweight armor materials and a great number of thrusters it is much faster and maneuverable than other suits. The suit is armed with an abdomen-mounted scattering mega particle cannon, a beam shot rifle, a pair of beam sabers stored in the arms and a shield with three missiles as well as a beam tomahawk.Because Char is a Newtype, the Sazabi was also equipped with six funnels which the pilot could control through his psycowaves via a Psycommu system. The Sazabi was also the first MS to be equipped with the revolutionary new psycoframe cockpit. This system featured microscopic psycommu receiver circuits installed throughout a mobile suit's internal frame and cockpit walls. These tiny circuits amplify and transmit a Newtype pilot's psycowaves, enabling the mobile suit to respond instantaneously to mental commands.

The MSM-07E Z'Gok-E (aka MSM-07E Z'Gok Experiment) is an experimental amphibious mobile suit introduced in the Mobile Suit Gundam 0080: War in the Pocket OVA . The Z'Gok E was an experimental improved version of the MSM-07 Z'Gok. Besides improved beam cannons in its arm, allowing for rapid-fire, the original Z'Gok's head-mounted missile launchers were also replaced with torpedo launchers for additional firepower when operating underwater. To allow for better cruising range underwater, the suit's main propulsion systems were relocated from the back to the legs to create a more streamlined body shape. Its limbs were also designed to be retractable for the same reason. The thrusters built into its back were meant for jumping and various ground based movements, and greatly boost the suit's mobility on land. The Z'Gok E used a standardized cockpit with the introduction of the United Maintenance Plan, and was powered by an improved generator which gave the suit ample performance.

The PMX-003 The-O is a mobile suit from the series Mobile Suit Zeta Gundam and is piloted by Paptimus Scirocco. The fourth of five mobile suits built by the Newtype Paptimus Scirocco on the Jupitris, the PMX-003 The-O is Scirocco’s personal mobile suit, and perhaps the most powerful. It has an independently developed control system to take advantage of his rare spatial recognition abilities, and its control interface is specifically tuned for Scirocco's use, making The-O impossible to pilot except by Scirocco himself. The generator output specifications are modest at less than 2,000Kw; however, The-O is equipped with a large-scale thermonuclear reactor comparable to that of a warship.The-O has very thick armor that can withstand direct beam hits, such as from the AMX-004 Qubeley's funnels. Although very bulky and heavy, it is outfitted with enough thrusters to maneuver and move at very high speeds, demonstrating powerful thrust similar to mobile armors. It is also extremely agile despite its massive frame, with performance that greatly surpasses common MS and displaying tremendous space combat capabilities. By taking advantage of The-O's large size, it is possible to load large amounts of propellant into various parts of the body and the skirt armor to extend operation time. The leg and armor units incorporate a complex multi-joint structure that allow a high degree of freedom of movement. These parts significantly differ from those found in typical mobile suits.In terms of weapons, The-O is only equipped with four beam swords and a beam rifle. However, thanks to its unique sub-arms, The-O can wield all four swords at once, something that no other mobile suit could do, allowing The-O to excel at close quarters combat. The-O is a robust machine designed with emphasis on mobility instead of excessive firepower, and features an excellent interface that reflects the skill of the pilot.The last special feature of The-O is the Bio-Sensor (no relation to the device installed in the MSZ-006 Zeta Gundam), which functions like a psycommu system and allows Scirocco to more easily interface with his suit.

The RGM-79GS GM Command Space Type is a mobile suit introduced in the OVA Mobile Suit Gundam 0080: War in the Pocket. Following the success of the RGM-79D GM Cold Districts Type, a late production type GM deployed in the One Year War, development of new localized warfare machines using the suit as a basis started. The basic concept is to maintain the fundamental design of the GM Cold Districts Type while improving on its output and mobility. Demands of MS pilots who were unsatisfied with the original RGM-79 GM's performance were also taken into account, and with the upcoming counter offensive in space against the Principality of Zeon in mind, a decision was made to simultaneously developed a ground use unit and a space use unit. The end results were the space use GM Command Space Type, and the ground use RGM-79G GM Command. Both suits were also used to collect data for the development of next-generation mass production models.Specifications wise, the GM Command series is said to be a match for the Zeon's MS-14A Gelgoog, but as many of the machines were deployed to areas outside of the main battlefield that had low urgency, its functions were often suppressed and it could not display its full potential. To improve on the GM Cold Districts Type’s mobility, the GM Command series’ thrusters are distributed all over its body. Furthermore, the backpack, which contains the main propulsion system, was also boldly redesigned and optimized separately for the GM Command Space Type and GM Command. This difference in the backpack is the biggest characteristic that differentiates the two machines, and is related to the different gravitational environment that they operate in, 0G and 1G respectively. While the GM Command had downward-pointing thrusters concentrated on the bottom of the backpack, the GM Command Space Type's thrusters are spread around the backpack and faces various directions. The GM Command Space Type's thruster output is also boosted by 10%, has more apogee motors, as well as a greater propellant capacity for higher operating time.With the GM Command series use of a generator with higher output, intakes and ducts are also added to enhance cooling functions. This higher output generator is however a double-edged sword. Although it allows for full-scale operation of equipment like beam gun and beam rifle, such generators at that time could only be manufactured in zero gravity facilities, so mass production of the suit then at the Earth Federation Forces’ largest production facility at Jaburo was not possible. This had a negative impact on the suit's production number during the war.Due to the accumulation of manufacturing and designing knowledge, the GM Command series' maintainability and operability was greatly improved compared to the very first mass production models that had inconsistent standards. Unlike the normal GM, the GM Command series has additional sensors in the head such as environment monitoring sensors to thoroughly detect human presence/survivability, and this boosts the suit's anti-personnel and anti-material evasive capabilities. The GM Command series is also the first in the GM series to utilize the mono-eye camera in the head to improve producibility. Communication capabilities are enhanced via the shoulder antenna, which also helps to prevent interferences or jamming caused by frequency bands used by civilians inside and outside of colonies. It was relatively easy to change the GM Command series' armor, backpack, and other parts; furthermore, its specifications can also be changed with little modification to the base structures.As the GM Command series was deployed as replenishment units during the war, only a small number were produced. Assignment of the machine to experienced MS pilots was prioritized, and as these pilots were often appointed as commanders of newly formed MS platoon, the GM Command series also gained a reputation as a 'Commander Use Unit' even though it was not specifically built for commanders. There were also cases where the suit was supplied on a platoon scale, leading to a considerable number of operational units in total.

The RGM-79G GM Command is a mobile suit that first appeared in the OVA Mobile Suit Gundam 0080: War in the Pocket. Following the success of the RGM-79D GM Cold Districts Type, a late production type GM deployed in the One Year War, development of new localized warfare machines using the suit as a basis started. The basic concept is to maintain the fundamental design of the GM Cold Districts Type while improving on its output and mobility. Demands of MS pilots who were unsatisfied with the original RGM-79 GM's performance were also taken into account, and with the upcoming counter offensive in space against the Principality of Zeon in mind, a decision was made to simultaneously developed a ground use unit and a space use unit. The end results were the ground use GM Command, and the space use RGM-79GS GM Command Space Type. Both suits were also used to collect data for the development of next generation mass production models.The GM Command is also called the "Colony Type" as it specialized in defending bases in space colonies and surrounding areas. For this reason, its output and weaponry were adjusted to reduce fatal damage to the colony's structure and walls. Specifications wise, the GM Command series is said to be a match for the Zeon's MS-14A Gelgoog, but as many of the machines were deployed to areas outside of the main battlefield that had low urgency, its functions were often suppressed and it could not display its full potential. To improve on the GM Cold Districts Type’s mobility, the GM Command series’ thrusters are distributed all over its body. Furthermore, the backpack, which contains the main propulsion system, was also boldly redesigned and optimized separately for the GM Command and GM Command Space Type. The placements of the thruster verniers on the GM Command's backpack are optimized based on simulations of operation within colonies, and they are pointed downwards for movements under gravity. Various sensors are also added to the backpack, replacing the normal GM's backpack beam saber rack.With the GM Command series use of a generator with higher output, intakes and ducts are also added to enhance cooling functions. This higher output generator is however a double-edged sword. Although it allows for full-scale operation of equipment like beam gun and beam rifle, such generators at that time could only be manufactured in zero gravity facilities, so mass production of the suit then at the Earth Federation Forces’ largest production facility at Jaburo was not possible. This had a negative impact on the suit's production number during the war.Due to the accumulation of manufacturing and designing knowledge, the GM Command series' maintainability and operability was greatly improved compared to the very first mass production models that had inconsistent standards. Unlike the normal GM, the GM Command series has additional sensors in the head such as environment monitoring sensors to thoroughly detect human presence/survivability, and this boosts the suit's anti-personnel and anti-material evasive capabilities. The GM Command series is also the first in the GM series to utilize mono-eye camera in the head to improve producibility. Communication capabilities are enhanced via the shoulder antenna, which also helps to prevent interferences or jamming caused by frequency bands used by civilians inside and outside of colonies. It was relatively easy to change the GM Command series' armor, backpack, and other parts; furthermore, its specifications can also be changed with little modification to the base structures. The suit served as the base for the RGM-79SP GM Sniper II.As the GM Command series was deployed as replenishment units during the war, only a small number were produced. Assignment of the machine to experienced MS pilots was prioritized, and as these pilots were often appointed as commanders of newly formed MS platoon, the GM Command series also gained a reputation as a 'Commander Use Unit' even though it was not specifically built for commanders. There were also cases where the suit was supplied on a platoon scale, leading to a considerable number of operational units in total.

The MS-09 Dom (aka MS-09B Dom) is a mass-production ground combat mobile suit introduced in Mobile Suit Gundam. Its most well known pilots are the Black Tri-Stars. A heavy mobile suit developed by Zimmad, the MS-09 Dom was a ground combat machine equipped with hovercraft technology. It was fitted with thermonuclear jets and rockets under its feet, allowing it to quickly move across the ground, greatly improving its mobility compared to previous ground-use mobile suits. Thanks to sensors located in front of its feet, it was able to traverse uneven terrain. While in cruising mode, it could hover across the ground using only its thermonuclear jets. The Dom can hover at a maximum speed of 381 km/hr for up to 5 hours.Its primary thrusters adopted the Saturn Engine, a type of thermonuclear engine that used heavy elements such as zinc and lead as propellant, granting it higher thrust than thermonuclear engines that used lighter elements as propellant. The mobile suit's design was largely unchanged from the YMS-09 Prototype Dom aside from its appearance. It inherited the same cross-shaped monoeye rail from the MS-07C-5 Gouf Test Prototype, granting it an improved view of aerial targets. Lateral field of view was obtained by auxiliary sensors.For defense, the Dom was heavily protected, adopting a unique "skirt armor" design to protect weak points in the back, such as thrusters. Its cockpit hatch armor, which was its greatest weakness in the front, was also greatly enhanced. However, since the cockpit was entered directly from the front of the Dom, pilots in desert and wetland areas complained that the console panel would become dirty from entering and exiting. Meanwhile, the Dom's head was merged into its chest, a design intended to deflect and ricochet enemy projectiles, as well as lowering the possibility of being hit.The Dom's primary weapon, the 360mm Giant Bazooka, was developed in parallel with the mobile suit. It was capable of sinking a space cruiser with a single shot. It was also armed with a heat saber for close combat, as well as a scattering beam cannon in its chest, which was capable of blinding the enemy. It was said that the beam cannon was originally intended to be an energy port for beam weapons, but was repurposed after the development of beam weapons was delayed.