All Products

AMX-004 Qubeley (キュベレイ Kyuberei?) is a mobile suit that appears in Mobile Suit Zeta Gundam and Mobile Suit Gundam ZZ. It is piloted by Haman Karn. The Qubeley is a next generation mobile suit designed for Newtypes that features numerous technological innovations which allow it to fight on par with other advanced mobile suits that appeared during the Gryps Conflict and the First Neo Zeon War. Developed from the data gathered from the MS-09R4 Psycommu Rick Dom "Schnee Weiss" and the AMX-001 Prototype Qubeley, the Qubeley featured four independently movable shoulder binders, two binders per shoulder, to assist in AMBAC (Active Mass Balance Auto Control), granting phenomenal mobility. Though lacking the full range of motion as the arms and legs, these binders bring the Qubeley's total number of movable limbs up to eight. Furthermore, these binders also contain the Qubeley's primary thrusters.The most notable feature of the Qubeley is that it is the first combat mobile suit to be equipped with a mobile suit-sized psycommu system, which is used to control the new remote controlled weaponry known as "Funnels". The prototype featured a similar system, but its psycommu had not been fully miniaturized and the Funnels were stored in its main body, leaving the prototype with a large body that stood 25 meters tall. The system aboard the Qubeley had been perfected and its ten Funnels were stored in a container located in its rear armor, allowing for quicker deployment and recall. The Qubeley lacks the mega particle cannons of the prototype version, replacing them with a pair of dual-purpose beam guns that can double as beam sabers for close combat. Lastly, the Qubeley is one of the first Zeon mobile suits to use a dual-type optical sensor instead of the traditional mono-eye.

The RX-77-2 Guncannon was a mobile suit used by the Earth Federation Forces introduced in the TV anime Mobile Suit Gundam. A middle-range support mobile suit developed simultaneously with the RX-78 Gundam and the RX-75 Guntank as part of Operation V, the Guncannon adopted the same Core Block System as the other two units. Due to its role as an artillery support unit, the Guncannon's design prioritized durability over mobility, and it was not equipped with any melee weapons. However, its armor was particularly heavy, capable of surviving a direct hit from an MS-09R Rick Dom's giant bazooka.Similar to the Guntank, the Guncannon's main weapons were a pair of shell-firing cannons, chosen for their reliability over beam weapons. These cannons could be optionally swapped out for a pair of spray missile launchers. Unlike the Guntank, however, the Guncannon's generator output allowed it to equip a beam rifle. It was also equipped with a pair of head-mounted Vulcan guns and hand grenades for attacking enemy strongholds.Though its head design appeared to be simpler than the Gundam's head, the Guncannon's sensor system was in fact more complicated than the Gundam's due to its need to engage in artillery warfare. This "twin eyes with goggles" sensor design were later inherited by the RGM-79 GM. While the Guncannon's mobility was adversely affected by its weight, it was still comparable to that of the Zeon's MS-06 Zaku II. Furthermore, the backpack thrusters have sufficient thrust to enable jumping maneuvers under gravity for a short period of time.

The RGM-96X Jesta Cannon is a mobile suit introduced in Mobile Suit Gundam Unicorn and used by the Londo Bell task force. Like its base unit, the RGM-89 Jegan, the RGM-96X Jesta can adapt to different needs through the use of dedicated option parts, resulting in multiple variants. An example of this is the Jesta Cannon, a heavy armed variant with enhanced firepower via the addition of a beam cannon, a quadruple multi-launcher, more hand grenades and an enhanced beam rifle. It also has added body armor, including an arm-mounted shield, but their placement is kept to a minimum after considering weight balance. When needed, the added armor can be purged instantly using explosive bolts.To handle the added weapons, the Jesta Cannon's fire control systems has been improved. Not only can the Jesta Cannon served as a mid-range fire support unit, which is a function synonymous with mobile suits that have the word "Cannon" in their name, it can also fight at the frontlines without any issues due to its enhanced offensive capabilities. The Londo Bell flagship, Ra Cailum, that is carrying 12 Jestas for evaluation tests is also loaded with sufficient parts for converting 5 of them into the Jesta Cannon.

Scale: 1/100 Supported Grade: MG/RG/HG/EG Features: Adjustable angels Adjustable height 4 Colors to choose from

Size: 3mm The high-transparency and eco-friendly PET material is adopted as the base material so that the condition of grooves can be easily observed in the carving/scribing process.  

UStar Scale Model Paint Bottle (Pack of 6) Size: 60ml Material: PET Features: mixing ball spill protection and sealing cap scale markings on the bottle for exact measurements Thickened and highly transparent PET material, which can prevent the corrosion of general water-based paint, lacquer-based paint, and enamel paint * PET is a plastic material. please do not store industrial-grade strong corrosive liquids to avoid bottle corrosion

Scale Model double-sided polishing cloth (4pc) Best used with a polishing compound to remove minor scratches and achieve a mirror-like finish. Size: 140mm x 140mm Color: Random

Scale Model double-sided polishing cloth (4pc) Best used with a polishing compound to remove minor scratches and achieve a mirror-like finish. Size: 140mm x 140mm Color: Random

Model: OTH-C108 Size: 9cm x 4cm x 1.3cm Polished on both sides. The green side is for fine sanding at #1000 grit and the white side is for polishing/buffing at #4000 grit.

Model: MS049 Size: 130mm Grit: #400/#600/#800/#1200 Double-sided file with two different textures.  Front side: Grain Texture Back side: Single Twill Texture High heat treatment, wear resistance, and extra hardness. The file width of 2mm makes it perfect to reach hard-to-reach areas for precision filing. * not intended to be used on metal materials    

Model: T09A17 Color: Red/Black/Blue/Gray 304 stainless steel blade collet, Brass chrome plated handle, All-aluminum lightweight body, low center gravity design for better handling Package Contains: Anti-rolling protection cap x 1 Galaxy Model Tools Modeler's Knife x 1 (random color) Bright & narrow edge replacement blades x 20

Model: MS060 Material: Tungsten Steel Tungsten steel is used for manufacturing micro-drill bits, high-durability self-sharpening rotary cutting blades, and rocket engine nozzles, among many other applications. To compare, steel has three times less rigidity than tungsten. This rigidity makes tungsten stronger than both steel and titanium.   Set contains: Hand Drill x 1 Drill bit 0.8mm x 1 Drill bit 1.0mm x 1 Drill bit 1.5mm x 1 Drill bit 2.0mm x 1 Drill bit 2.5mm x 1  

Model: MSF-13 Size: 90x13x3mm Material: Tempered Glass Excellent handling and buffing abilities. The buffing results are equivalent to polishing with #10,000~#12,000 grit sandpapers or buffing with a polishing compound. Made with tempered glass. Can be washed with water with no concern of corrosion. * comes with a plastic protection box.  * do not drop this item as it may shatter. always put the item back into its protection box after use * not intended for polishing metal materials

Shorter for better handling. Extra durable Each stick is labeled with its grit. Each grit is also laced with a different color in the middle of the stick. Size: 88mm x 20mm x 4mm This set comes with 4 sanding sticks: #400 x 1 - Red #600 x 1 - Blue #800 x 1 - Purple #1000 x 1 - White

This brings out a realistic felling better than a painted top coat. Mr.TOP COAT can be applied over slide marks(decals) without blemishes. A good way to eliminate differences between the paints and the slide marks is making the model surface smoother. important shipping infoCan only ship via ground transport. No overseas shipping, no express shipping.

The GN-005 Gundam Virtue (aka Gundam Virtue, Gundam Virtue Particle, Virtue) is a mobile suit featured in season one of Mobile Suit Gundam 00. It is piloted by Tieria Erde. A heavily armed and armored mobile suit, the Gundam Virtue has the highest offensive and defensive power among the third-generation Gundams deployed in AD 2307 by the Celestial Being, a paramilitary organization aiming to eliminate world conflicts through armed interventions. Specializing in artillery warfare for fleet battles and assaulting enemy strongholds, the Virtue's firepower is unmatched among contemporaries thanks to heavy beam weaponry, consisting of a GN Bazooka and two GN Cannons. As Virtue is not meant for anti-mobile suit combat, its only melee weapon is a pair of GN Beam Sabers. Due to its large size, Virtue's mobility and evasive capabilities are lower than the other Gundams, but these weaknesses are mitigated by its high defensive strength in the form of heavy armor and the ability to generate a 360-degree GN Field barrier around itself that can nullify most physical and beam attacks.The Virtue demonstrated impressive propulsion capabilities when it was shown to be capable of overcoming the combined thrust of six MSJ-06II-E Tieren Space Types. Like the other Gundams, Virtue has a semi-perpetual GN Drive in the center of its body that provides almost limitless energy and generates special, multifunctional GN Particles. The GN Particles have a unique mass reduction effect and because of this, the heavily equipped Virtue can operate efficiently and weighs only half as much as the similarly bulky MSJ-06II-A Tieren Ground Type operated by the Human Reform League. This reduction effect remains even when the Virtue is not operating as the GN Drive continues to function. The GN Particles are also utilized for propulsion, beam weaponry, generation of GN Field, attitude control, and stealth purposes as they can cause electromagnetic interference, leaving conventional communications and radar devices useless.Due to the heavy GN Particle demand of Virtue's beam weaponry and GN Field, large capacity GN Condensers are mounted throughout its body to store excess particles produced by the GN Drive when the Gundam is not operating. The GN Particles are primarily controlled through a pair of torso-mounted clavicle antennas, and light purple-colored "GN Cables" are installed in various locations to facilitate the supply of these particles to each part of the Gundam and for attitude control purposes. In an emergency, the Virtue can activate the special "Trans-Am System" to enhance its thrust and defensive strength, as well as increase its output to three times that of its normal specifications for a limited time period. The Virtue glows red as a side-effect and though Trans-Am boosts the power of its beam weaponry, this system is also a double-edged sword as Virtue's performance will drop dramatically once it ends.Besides the Trans-Am System, which is also utilized by other Gundams, the Virtue has another method of responding to emergencies that is unique, it can purge its armor to reveal the GN-004 Gundam Nadleeh. However, this was not the original intention of the armor purging mechanism, which was meant for the simultaneous switch to Nadleeh while activating the latter's Trial System. The concept of hiding a Gundam within another Gundam can be traced to the common predecessor of Virtue and Nadleeh – the second generation GNY-004 Gundam Plutone, which is fitted with an ejectable flight unit known as the "Core Fighter". The Plutone is also the first Gundam capable of generating a 360-degree GN Field, but its generation system is not as stable as Virtue's. The Nadleeh is concealed to prevent its Trial System, an ability to stop betrayers, from being discovered and for effective utilization of the limited numbers of GN Drives that Celestial Being has.Among the third-generation Gundams, Virtue's development was the slowest. At that time, the current form of Virtue was also known as "Gundam Virtue Particle" to differentiate it from an alternate design, the physical projectile-based GN-005/PH Gundam Virtue Physical. Both designs are prepared by Veda, Celestial Being's quantum computing system, based on its predictions about armed intervention missions. Despite their differences, both Virtue Particle and Virtue Physical are designed as artillery units for anti-fleet and anti-stronghold combat, this ensures the Nadleeh is positioned at the rear and could quickly return to the base or mothership to be outfitted with more effective equipment to stop betrayers. In the end, after studying the results of multiple joint exercises involving the four Gundam Meisters, Veda chose Virtue Particle as it displayed better cooperability with the other Gundams.Veda rejected the idea of keeping the Virtue Physical as alternate equipment because switching equipment mid-mission is expected to be very difficult due to the lean manpower and the design of the mothership. There is also the worry that the enemy might discover the hidden Nadleeh by observing the commonalities between the two equipment sets. The Gundam Virtue is eventually succeeded by the reborn Celestial Being's GN-008 Seravee Gundam, which is also an anti-fleet and anti-stronghold mobile suit equipped with multiple beam cannons and GN Field. Data from the Gundam Virtue is also utilized in the development of the CBY-077 GN Cannon and the GNZ-003 Gadessa, the former is part of Veda's alternate plan for armed intervention and the latter is used by an enemy of the reborn Celestial Being.

The GN-0000+GNR-010 00 Raiser (aka 00 Raiser) is the combined form of GN-0000 00 Gundam and GNR-010 0 Raiser in season 2 of Mobile Suit Gundam 00. Setsuna F. Seiei pilots the 00 Gundam and Saji Crossroad pilots the 0 Raiser, however, when combined Setsuna can operate both units himself. Despite its power, the GN-0000 00 Gundam is a highly experimental unit that suffers from power instability issues and so requires constant maintenance and fine-tuning. The Twin Drive System was also a very new technology, requiring the external stabilizing equipment on 00's main support unit, the GNR-010 0 Raiser, to safely execute Trans-Am and fully synchronize the GN Drives. Some data from GN-XXX+GNR-000 Sefer Rasiel was also exploited in its development.When combining is needed, laser guidance sensors would mutually lock onto each other, with a Haro auto-configuring the docking sequence. 0 Raiser's binders detach from the 0 Raiser body and latch onto 00's GN Drives, and its main body combines with the 00 Gundam's backpack, resulting in an angelic-like form. After successful docking, 00 Gundam's system screen(s) reflect the changes to the frame and the Twin Drive's stabilization. Each of 0 Raiser's binders can be mounted with a GN Shield to increase it's defensive capabilities, this form can remain the same even when docked onto 00 Gundam's GN Drive housing units. Without the GN Shields attached, the binders also act as shields themselves, capable of blocking beam shots from GNZ-003 Gadessa's GN Mega Launcher in Trans-Am mode.As the 00 Raiser the Twin Drive reaches 100% synchronization rate, it can achieve GN Particle generation rates far exceeding 300% during Trans-Am(700% during the first dock), and also gains the usage of the Raiser System. These feats allow 00 Raiser to fully harness its massive particle production (too much for the 00's frame to properly handle alone) and perform at peak capacity. While in Trans-Am, 00 Raiser has also been seen utilizing quantum teleportation in a few battles although the specific activation and control mechanism has not been elaborated upon.The Raiser System allows the 00 Raiser to execute powerful attacks such as a massive GN Beam Saber dubbed the "Raiser Sword", allowing for greater close combat abilities, and using Trans-Am mode with even greater power and duration. Originally requiring both of its GN Swords working with the 0 Raiser's binders to produce and control the Raiser Sword, the 00 was later equipped with a GN Sword III. This weapon was capable of harnessing the power of the Raiser System to generate a refined, more controllable version of the Raiser Sword.The power of 00 Raiser is further enhanced with the presence of an Innovator pilot. Once such a being is detected the Twin Drive can execute Trans-Am Burst, a massive flood of purified GN Particles across a massive area. With the Twin Drive's full abilities in constant demand to combat the A-Laws and Innovators, 00 Raiser became the mainstay unit to effectively combat opposing MS. Overall, 00 Raiser is a mobile suit that exceeds the performance of all others, surpassing the very concept of "Gundam".

The MBF-P03R Gundam Astray Blue Frame 2nd Revise is the improved form of the MBF-P03 Gundam Astray Blue Frame Second L developed by the Serpent Tail with help from Lowe Guele. It first appeared in the photo series Mobile Suit Gundam SEED VS Astray. The unit is piloted by Gai Murakumo. Using combat data obtained from the Gundam Astray Blue Frame Third, the Blue Frame Second L was upgraded into the Gundam Astray Blue Frame 2nd Revise. The new MS has better balance and its main weapon, Tactical Arms II, is an improved version of the original Tactical Arms and has 2 new forms, Gatling Arm and Sword Arm. Blue Frame 2nd Revise retains the other weapons of Second L as well as the Trans Phase Armor system around the cockpit. It also stores additional power packs on its rear skirts, which are often used together with the Gatling form. Like the original Blue Frame, the Blue Frame 2nd Revise can be equipped with the Scale System for aquatic missions.

The GAT-X207 Blitz Gundam is a Mobile Suit introduced in Mobile Suit Gundam SEED and piloted by Nicol Amalfi. The GAT-X207 Blitz Gundam is developed for the purpose of conducting surprise attacks deep behind enemy lines. It is the only unit among the five prototypes created under the Alliance's G Project to use the X200 series frame that is designed to support special systems. In this case, the Mirage Colloid Stealth System that renders Blitz invisible to both sensors and the naked eye. The suit is painted mainly black to enhance the effectiveness of the stealth system and is fitted with other systems to ensure the silent operation of internal mechanisms and systems, as well as to control the heat dissipation while cloaked. Like the other four units, Blitz is also equipped with Phase Shift armor system, but unlike them, it does not have any built-in weaponry like the CIWS. Its armament are all arm-mounted and consists of a grappling claw and an offensive shield system, which mounts both melee and range, beam as well as non-beam weapons.

The GN-002 Gundam Dynames (aka Gundam Dynames, Dynames) is a mobile suit featured in season one of Mobile Suit Gundam 00 and is piloted by Lockon Stratos. Using combat data obtained from the Gundam Astray Blue Frame Third, the Blue Frame Second L was upgraded into the Gundam Astray Blue Frame 2nd Revise. The new MS has better balance and its main weapon, Tactical Arms II, is an improved version of the original Tactical Arms and has 2 new forms, Gatling Arm and Sword Arm. Blue Frame 2nd Revise retains the other weapons of Second L as well as the Trans Phase Armor system around the cockpit. It also stores additional power packs on its rear skirts, which are often used together with the Gatling form. Like the original Blue Frame, the Blue Frame 2nd Revise can be equipped with the Scale System for aquatic missions. The paramilitary organization, Celestial Being, deployed several Gundams in AD 2307 to eliminate world conflicts through armed interventions, and the Gundam Dynames which specialized in long-range shooting is one of them. Like its fellow Gundams, Dynames has a semi-perpetual GN Drive in the center of its body that provides almost limitless energy and produces special, multifunctional GN Particles. The GN Particles grant outstanding mobility and are also utilized for beam weaponry, attitude control, and stealth purposes as they can cause electromagnetic interference, leaving conventional communications and radar devices useless. The Dynames is a third-generation unit developed using the operational data from the second-generation GNY-002 Gundam Sadalsuud, inheriting the reconnaissance mobile suit's powerful sensing capabilities that are now utilized for long-range shooting.During combat, the Dynames primarily serve as a sniper as well as a fire support unit for its allies. Its main weapon is the extremely long-range and powerful GN Sniper Rifle, and when operating this rifle, Dynames is in "Sniper Mode", whereby the Gun Camera hidden in its head is exposed and a precision shooting scope in the cockpit is deployed. The Dynames is however not just limited to long-range attacks as it has a variety of guns and weapons, allowing it to engage in close to mid-range combat when needed, and adapt to various types of missions (including solo missions) as well as changing battlefield conditions. Other standard armaments of the Dynames included GN Beam Sabers on its rear waist unit for close combat, GN Missiles on its knees and front waist armor that can be used to deter approaching enemies, and a GN Shield on the left shoulder for defense. As for optional armaments, it can equip GN Beam Pistols for close to mid-range combat, a GN Full Shield for enhanced defensive capabilities, and a Super Substratospheric Altitude Gun to snipe targets outside the atmosphere from the ground.Besides mounting the GN Beam Sabers, the Dynames' rear waist unit can be used to support the Gundam when it is shooting from seated positions and has a pair of propulsion systems, known as GN Verniers, that create thrust by releasing GN Particles. These verniers are also utilized by other Gundams and have a mechanism whereby their cores are revealed when being activated and when increasing their output. Additionally, the verniers can be moved at the point of attachment, allowing their thrust direction to be adjusted. The overall layout of the Dynames' cockpit is similar to other third-generation Gundams, except for two differences. The first is the aforementioned precision shooting scope stored in the ceiling that lowers down when in use and retracts when not needed. The second is a dock on the right side for placing the individual support AI, Haro, which serves as a sub-pilot, controlling various aspects of the Dynames so the Gundam Meister, Lockon Stratos, can focus on shooting using the precision shooting scope.The third generation Gundams deployed in AD 2307 have several common pieces of equipment, including a pair of clavicle antennas on the torso that serves as the primary control device for the GN Particles, light purple-colored "GN Cables" on various body locations to facilitate the supply of GN Particles to each part of the Gundam and for attitude control purposes, and GN Condensers placed throughout the body to store excess GN Particles, ensuring a reserve of particles that the Gundam can rely on when its operation consumed more than what the GN Drive can produce instantaneously. There is also the special "Trans-Am System" that the Gundams can activate during an emergency to enhance their thrust and defensive capabilities, as well as increase their output to three times that of their normal specifications for a limited time period. This system also causes the Gundams to glow red, and in Dynames' case, its shooting accuracy is improved as well. Unfortunately, this system is a double-edged sword, as the Gundams' performance will drop dramatically once it ends. Additional optional equipment was also developed for the Dynames, such as the set of a sub-aquatic sniper rifle and accompanying sensors that change it into the GN-002/DG014 Gundam Dynames Torpedo and the GNR-001D GN Arms Type-D support mecha that it can dock with to form the more powerful GN-002+GNR-001D GN Armor Type-D. A successor machine with all-around improved performance is later developed based on the Dynames' data and it is known as the GN-006 Cherudim Gundam. Additionally, the Dynames that was moderately damaged during the battle with the UN Forces was eventually refurbished into the GN-002RE Gundam Dynames Repair and deployed on Earth following the defeat of the A-Laws and the Innovators.