All Products

The ν Gundam is one of the most advanced mobile suits during the Second Neo Zeon War in U.C. 0093, together with Char Aznable's MSN-04 Sazabi, it is used by Amuro Ray who also came up with its basic design. It was manufactured at Anaheim Electronics' Von Braun plant and completed in a short period of time (about three months) under the supervision of chief engineer October Saran. Its design is based on the average specification values of each successive generation of Gundam-type units from the original RX-78-2 Gundam to the MSZ-010 ΖΖ Gundam and updated with state-of-the-art technologies introduced at the time. Various test data collected from the ARX-014P Silver Bullet (Funnel Test Type), the YRA-90A μ Gundam, and the RX-9 Narrative Gundam were also used in its development.The ν Gundam's design focuses on versatility and operational aspects, as well as emphasizes on reliability and durability for protracted battles. It adopts unitized parts that are designed according to EFF standards, except for the Psycho-Frame, for easier procurement of parts and materials and reducing special components as much as possible. It can be easily repaired due to maintenance feedback and combat data. In addition, it reflects Amuro Ray's experience as an MS pilot cultivated over the years.Incorporating the Psycho-Frame technology secretly provided to Anaheim Electronics by Char Aznable of Neo Zeon, the ν Gundam was able to utilize Psycommu weapons and channel the emotions and mental energies of a Newtype pilot. It is also the first Gundam-type machine to be equipped with Funnels, and a newly developed MS control program is installed to account for the ν Gundam's center of mass during the separation and movement of the Funnels. Despite its short development time, the ν Gundam proved itself to be a formidable mobile suit and when combined with legendary ace pilot Amuro Ray's immense skill and experience, this powerful, state-of-the-art machine was able to almost single-handedly hold back the whole Neo Zeon force, and its Psycho-Frame was put to the test to determine the history of humanity living on earth.

The ZGMF-X56S/β Sword Impulse Gundam is a Mobile Suit introduced in the anime Mobile Suit Gundam SEED Destiny. It is piloted by Shinn Asuka and later by Lunamaria Hawke. The ZGMF-X56S/β Sword Impulse is the ZGMF-X56S Impulse equipped with the β Sword Silhouette pack and is designed to serve as a close combat mobile suit. The Sword Silhouette pack adds two anti-ship laser swords, which can be combined into a larger double bladed sword, and a pair of beam boomerangs to the Impulse's standard armaments of two CIWS, two anti-armor knifes, a beam rifle and a shield. Thanks to the presence of the beam rifle, the suit has no problem engaging in range combat if required. The suit's VPS colors are different from that of the normal Impulse, and is now red, black and white.

The Astray Red Frame Kai is the upgraded version of the MBF-P02 Gundam Astray Red Frame developed and piloted by Lowe Guele. It first appeared in the photo series Mobile Suit Gundam SEED VS Astray. An upgraded form of MBF-P02 Astray Red Frame developed by Lowe after his first encounter with LN-GAT-X207 Nebula Blitzs, the major change to the suit is the replacement of the Red Frame's backpack with Tactical Arms IIL and its mount. Besides the two head-mounted "Igelstellung" 75mm multi-barrel CIWS, Tactical Arms IIL and "Gerbera Straight" katana, Red Frame Kai is also equipped with "Tiger Pierce" Katana. It no longer uses the physical shield and the beam torch component of Tactical Arms IIL replaces the Type 71 beam rifle.Like MBF-P03R Gundam Astray Blue Frame 2nd Revise's Tactical Arms II, Tactical Arms IIL can also transform into multiple forms, with each form granting Red Frame Kai unique abilities. Compared to Blue Frame 2nd R's Tactical Arms II, Tactical Arms IIL only retains the Sword form and a slightly altered Flight form. The other 4 forms, Arrow form, Work form, V form, and Delta form are new.Other than these different forms, Tactical Arms IIL can also function as a "Maga no Ikutachi" Energy Absorption Claw and as a DRAGOON. The beam torch component can be detached and used as a welding tool or a beam rifle by adjusting its output. Tactical Arms IIL is a product of all Lowe's knowledge however its multiple forms and functions also increase the chance of it malfunctioning and make its maintenance difficult.

The GAT-X103 Buster Gundam is a prototype artillery mobile suit introduced in the anime series Mobile Suit Gundam SEED. It was piloted by Dearka Elsman. One of the five mobile suits developed as part of the Earth Alliance's G Project, the Buster Gundam is an artillery mobile suit and adopts the X100-series frame, similar to the one used by the GAT-X102 Duel Gundam. It has firepower rivaling that of a battleship and is meant to provide rear support for the other units and to attack enemy ships or facilities from a distance. Due to its role, the main sensor camera on Buster's head is very important and is protected with additional armor.Its primary armaments are the gun launcher and high-energy rifle, both are energy intensive and have their own sub-generators. They can also combine to form the more powerful anti-armor shotgun or the hyper-impulse long-range sniper rifle, with the improved firepower seemingly caused by the linkage of the sub-generators. Although the suit has no close combat weapon, it has a pair of shoulder-mounted missile pods that can be used to discourage enemy units from closing in. Like other units in the G Project, Buster has Phase Shift armor, making it nearly impervious to physical weapons.

The GNT-0000 00 Qan[T] (aka 00Q, 00 Qan[T], pronounced "Double-Oh Quanta") is the successor to the GN-0000+GNR-010 00 Raiser in Mobile Suit Gundam 00 The Movie: Awakening of the Trailblazer. It is piloted by Setsuna F. Seiei.A fifth Generation Gundam designed and tuned specifically for Celestial Being's first Innovator, Gundam Meister Setsuna F. Seiei, 00 Qan[T] is the latest mobile suit (MS) designed by Celestial Being. Its blueprints originated from an Innovators draft and were sent over from Veda/Tieria (with level 7 clearance) for Celestial Being engineers to analyze and develop. As the successor to GN-0000+GNR-010 00 Raiser, 00 Qan[T] contains an upgraded and improved Twin Drive System and possesses the new Quantum System. Whereas Zabanya and Harute were developed using parts from their predecessors, 00 Qan[T]'s was made as a new mobile suit. The development resources and focus used on 00 Qan[T] are of a higher level than the other two.The unit possesses two newly created GN Drives specifically made for its Twin Drive System. The drives are located on its back and underneath the shield respectively and were developed by a team led by Linda Vashti at Jupiter. As these newly made solar furnaces are developed with perfect synchronization in mind, no external help with stabilization is required, thus 00 Qan[T] does not need a support unit such as 0 Raiser like 00 Gundam did. They can also be directly connected with each other which would result in a higher sync rate and output, however, when used this way they become extremely hard to control. To prevent unexpected problems, they are usually kept separate.The Quantum System is also the successor to 00 Raiser's Trans-Am Burst System, which allows Setsuna to expand his quantum brainwaves. It creates a massive quantum field that extends an Innovator's consciousness to communicate with sentient minds for advanced communications. To activate the system, the Innovator pilot's quantum brainwaves must be active. Once scanned, the two GN Drives connect. Finally, large portions of Qan[T]'s armor is purged, and the condensers within the limbs and the GN Drive core extend beyond the frame of the suit.Like its predecessors (the Exia and 00), 00 Qan[T] is a close combat-oriented mobile suit. Its primary weapon is the GN Sword V, the latest in the line of dual-functioning weapons that can alternate between sword and rifle modes. A GN Shield is mounted over the left shoulder in a similar fashion to one of the GN-0000 00 Gundam's GN Drives. The shield itself can deploy 6 GN Sword Bits (stored on the sides of the shield) which serve many functions but are primarily remote blades. The Sword Bits can be attached to the GN Sword V to form either a powerful buster sword or a buster rifle for combat. For added defense, 00 Qan[T] can deploy a GN Field by placing the 6 Sword Bits in a closed spherical formation and can activate the Trans-Am System to enhance its overall capabilities.00 Qan[T] can quantize like 00 Raiser, but with improvements over the original, it is now able to execute this function at will. Unlike 00 Raiser, 00 Qan[T] is capable of quantizing not only for short distances, but all the way across the universe, which was shown when it teleported to the ELS homeworld on the far side of another galaxy. 00 Qan[T]'s Sword Bits have the ability to form a portal and aid in the process. This similar function is also present in GNW-100A Sakibure which appeared 50 years after the end of the movie.The headpiece of the 00 Qan[T] acts as a controlling device for the Sword Bits. The particle-controlling capabilities of the antennae have yet again improved, allowing the 00 Qan[T] to communicate using Quantum Brainwave interfacing. Ian Vashti has designed the head of the 00 Qan[T] to resemble Setsuna's previous Gundams, the GN-001 Gundam Exia, and the GN-0000 00 Gundam.The arm parts of the 00 Qan[T] were made to allow the 00 Qan[T] to wield it's close combat weapons to the fullest. The wrist joints were made to be so flexible that they actually could move like a human arm. The GN Condensers located within the arms have been improved, allowing GN Particles to be transferred to the weapons more smoothly and effectively than the 00 Raiser's condensers.The leg parts of the 00 Qan[T] have built-in AMBAC (Active Mass Balance Auto-Control) capabilities to allow it to achieve high maneuverability in zero-G conditions. The knee joints of the 00 Qan[T] were made to be as fluid in motion as a real human knee, with GN condensers located in them, which also improved. Some parts of the legs were developed from the GNZ series, while other parts bore massive improvements to the original parts from the 00. The remaining parts were derived from other GN Drive-equipped mobile suits.Being Celestial Being's most advanced MS to date, the 00 Qan[T] is so powerful that it could possibly have eliminated the entire ELS attack force single-handedly had Setsuna chosen not to communicate with them. However, it should be noted that this is just a hypothetical calculation by Veda. It excludes important factors such as ELS' healing abilities, and the physical impossibility of the pilot fighting without food or rest over a whole week of constant battling, making it a very difficult feat to achieve nevertheless.

The ZGMF-X42S Destiny Gundam is the titular mobile suit of Mobile Suit Gundam SEED Destiny and was piloted by Shinn Asuka. A straight-built Gunpla version is piloted by Shimon Izuna in Gundam Build Fighters Try. The ZGMF-X42S Destiny Gundam is a high performance general-purpose MS commissioned by ZAFT Chairman Gilbert Durandal, who ordered it to be incorporated with the most advanced technology of the time, including technologies banned by the Junius Treaty. Based on the ZGMF-X56S Impulse Gundam and Shinn Asuka's combat data, it is designed to handle any combat situations with a single set of varied armament, a concept first tested on the ZGMF-X56S/θ Destiny Impulse. For close combat, it has two beam boomerangs that double as beam sabers, a pair of palm beam cannons, and a large beam sword. For ranged battle, it is equipped with a long-range beam cannon and a beam rifle. For defense, it mounts a small physical shield as well as two beam shield generators. Lastly, the suit has a standard set of CIWS.For the Destiny Gundam to use its variety of weapons effectively and quickly, it needs to have a wider range of body movements as well as be more flexible. To achieve a wider range of body movements, the suit's basic structural components are split into smaller, movable pieces, while its armor is divided into smaller pieces in a manner similar to that of the ZGMF-X20A Strike Freedom Gundam's. The exposed gaps in the armor due to smaller armor pieces are remedied by mapping out the ranges of motion of the frame using Shinn's combat performance to determine the most efficient way to separate the armor parts. This ensures the wider range of body movements do not compromise defensive power. To be more flexible, the Destiny's joints are constructed of the same materials found in Phase Shift armor. This allows the joints to possess near-human flexibility when phase-shifted and a faint metallic glow is produced when discharging excess residual energy within the body through the joints. Through these measures, the suit met its requirements, however, various problems remain to be solved, including maintenance problems and production issues.Other special aspects are the Destiny's use of the new Voiture Lumiere propulsion system and the use of Mirage Colloid to create illusionary copies of itself. Destiny's Voiture Lumiere propulsion system is installed in the wings, which are improved version of the ZGMF-X10A Freedom Gundam's wings, and will produce a special light effect known as Wings of Light during high speed movements. The Voiture Lumiere propulsion system is frequently used alongside the Mirage Colloid to confuse the enemy as the real Destiny sets up for a high-speed attack. Like the ZGMF-X666S Legend Gundam, the Destiny Gundam is powered by the Hyper-Deuterion Engine and armored with Variable Phase Shift armor. Although classified as a "Second Stage Series" mobile suit, as indicated by the "S" in its model code, the Destiny should be a "Third Stage Series" instead based on its performance. This is done to hide the fact that it is a nuclear-powered suit and should have an "A" instead.

The ν Gundam is one of the most advanced mobile suits during the Second Neo Zeon War in U.C. 0093, together with Char Aznable's MSN-04 Sazabi, it is used by Amuro Ray who also came up with its basic design. It was manufactured at Anaheim Electronics' Von Braun plant and completed in a short period of time (about three months) under the supervision of chief engineer October Saran. Its design is based on the average specification values of each successive generation of Gundam-type units from the original RX-78-2 Gundam to the MSZ-010 ΖΖ Gundam and updated with state-of-the-art technologies introduced at the time. Various test data collected from the ARX-014P Silver Bullet (Funnel Test Type), the YRA-90A μ Gundam, and the RX-9 Narrative Gundam were also used in its development.The ν Gundam's design focuses on versatility and operational aspects, as well as emphasizes on reliability and durability for protracted battles. It adopts unitized parts that are designed according to EFF standards, except for the Psycho-Frame, for easier procurement of parts and materials and reducing special components as much as possible. It can be easily repaired due to maintenance feedback and combat data. In addition, it reflects Amuro Ray's experience as an MS pilot cultivated over the years.Incorporating the Psycho-Frame technology secretly provided to Anaheim Electronics by Char Aznable of Neo Zeon, the ν Gundam was able to utilize Psycommu weapons and channel the emotions and mental energies of a Newtype pilot. It is also the first Gundam-type machine to be equipped with Funnels, and a newly developed MS control program is installed to account for the ν Gundam's center of mass during the separation and movement of the Funnels. Despite its short development time, the ν Gundam proved itself to be a formidable mobile suit and when combined with legendary ace pilot Amuro Ray's immense skill and experience, this powerful, state-of-the-art machine was able to almost single-handedly hold back the whole Neo Zeon force, and its Psycho-Frame was put to the test to determine the history of humanity living on earth.

AMX-004 Qubeley (キュベレイ Kyuberei?) is a mobile suit that appears in Mobile Suit Zeta Gundam and Mobile Suit Gundam ZZ. It is piloted by Haman Karn. The Qubeley is a next generation mobile suit designed for Newtypes that features numerous technological innovations which allow it to fight on par with other advanced mobile suits that appeared during the Gryps Conflict and the First Neo Zeon War. Developed from the data gathered from the MS-09R4 Psycommu Rick Dom "Schnee Weiss" and the AMX-001 Prototype Qubeley, the Qubeley featured four independently movable shoulder binders, two binders per shoulder, to assist in AMBAC (Active Mass Balance Auto Control), granting phenomenal mobility. Though lacking the full range of motion as the arms and legs, these binders bring the Qubeley's total number of movable limbs up to eight. Furthermore, these binders also contain the Qubeley's primary thrusters.The most notable feature of the Qubeley is that it is the first combat mobile suit to be equipped with a mobile suit-sized psycommu system, which is used to control the new remote controlled weaponry known as "Funnels". The prototype featured a similar system, but its psycommu had not been fully miniaturized and the Funnels were stored in its main body, leaving the prototype with a large body that stood 25 meters tall. The system aboard the Qubeley had been perfected and its ten Funnels were stored in a container located in its rear armor, allowing for quicker deployment and recall. The Qubeley lacks the mega particle cannons of the prototype version, replacing them with a pair of dual-purpose beam guns that can double as beam sabers for close combat. Lastly, the Qubeley is one of the first Zeon mobile suits to use a dual-type optical sensor instead of the traditional mono-eye.

The RX-77-2 Guncannon was a mobile suit used by the Earth Federation Forces introduced in the TV anime Mobile Suit Gundam. A middle-range support mobile suit developed simultaneously with the RX-78 Gundam and the RX-75 Guntank as part of Operation V, the Guncannon adopted the same Core Block System as the other two units. Due to its role as an artillery support unit, the Guncannon's design prioritized durability over mobility, and it was not equipped with any melee weapons. However, its armor was particularly heavy, capable of surviving a direct hit from an MS-09R Rick Dom's giant bazooka.Similar to the Guntank, the Guncannon's main weapons were a pair of shell-firing cannons, chosen for their reliability over beam weapons. These cannons could be optionally swapped out for a pair of spray missile launchers. Unlike the Guntank, however, the Guncannon's generator output allowed it to equip a beam rifle. It was also equipped with a pair of head-mounted Vulcan guns and hand grenades for attacking enemy strongholds.Though its head design appeared to be simpler than the Gundam's head, the Guncannon's sensor system was in fact more complicated than the Gundam's due to its need to engage in artillery warfare. This "twin eyes with goggles" sensor design were later inherited by the RGM-79 GM. While the Guncannon's mobility was adversely affected by its weight, it was still comparable to that of the Zeon's MS-06 Zaku II. Furthermore, the backpack thrusters have sufficient thrust to enable jumping maneuvers under gravity for a short period of time.

The RGM-96X Jesta Cannon is a mobile suit introduced in Mobile Suit Gundam Unicorn and used by the Londo Bell task force. Like its base unit, the RGM-89 Jegan, the RGM-96X Jesta can adapt to different needs through the use of dedicated option parts, resulting in multiple variants. An example of this is the Jesta Cannon, a heavy armed variant with enhanced firepower via the addition of a beam cannon, a quadruple multi-launcher, more hand grenades and an enhanced beam rifle. It also has added body armor, including an arm-mounted shield, but their placement is kept to a minimum after considering weight balance. When needed, the added armor can be purged instantly using explosive bolts.To handle the added weapons, the Jesta Cannon's fire control systems has been improved. Not only can the Jesta Cannon served as a mid-range fire support unit, which is a function synonymous with mobile suits that have the word "Cannon" in their name, it can also fight at the frontlines without any issues due to its enhanced offensive capabilities. The Londo Bell flagship, Ra Cailum, that is carrying 12 Jestas for evaluation tests is also loaded with sufficient parts for converting 5 of them into the Jesta Cannon.

Scale: 1/100 Supported Grade: MG/RG/HG/EG Features: Adjustable angels Adjustable height 4 Colors to choose from

Size: 3mm The high-transparency and eco-friendly PET material is adopted as the base material so that the condition of grooves can be easily observed in the carving/scribing process.  

UStar Scale Model Paint Bottle (Pack of 6) Size: 60ml Material: PET Features: mixing ball spill protection and sealing cap scale markings on the bottle for exact measurements Thickened and highly transparent PET material, which can prevent the corrosion of general water-based paint, lacquer-based paint, and enamel paint * PET is a plastic material. please do not store industrial-grade strong corrosive liquids to avoid bottle corrosion

Scale Model double-sided polishing cloth (4pc) Best used with a polishing compound to remove minor scratches and achieve a mirror-like finish. Size: 140mm x 140mm Color: Random

Scale Model double-sided polishing cloth (4pc) Best used with a polishing compound to remove minor scratches and achieve a mirror-like finish. Size: 140mm x 140mm Color: Random

Model: OTH-C108 Size: 9cm x 4cm x 1.3cm Polished on both sides. The green side is for fine sanding at #1000 grit and the white side is for polishing/buffing at #4000 grit.

Model: MS049 Size: 130mm Grit: #400/#600/#800/#1200 Double-sided file with two different textures.  Front side: Grain Texture Back side: Single Twill Texture High heat treatment, wear resistance, and extra hardness. The file width of 2mm makes it perfect to reach hard-to-reach areas for precision filing. * not intended to be used on metal materials    

Model: T09A17 Color: Red/Black/Blue/Gray 304 stainless steel blade collet, Brass chrome plated handle, All-aluminum lightweight body, low center gravity design for better handling Package Contains: Anti-rolling protection cap x 1 Galaxy Model Tools Modeler's Knife x 1 (random color) Bright & narrow edge replacement blades x 20

Model: MS060 Material: Tungsten Steel Tungsten steel is used for manufacturing micro-drill bits, high-durability self-sharpening rotary cutting blades, and rocket engine nozzles, among many other applications. To compare, steel has three times less rigidity than tungsten. This rigidity makes tungsten stronger than both steel and titanium.   Set contains: Hand Drill x 1 Drill bit 0.8mm x 1 Drill bit 1.0mm x 1 Drill bit 1.5mm x 1 Drill bit 2.0mm x 1 Drill bit 2.5mm x 1  

Model: MSF-13 Size: 90x13x3mm Material: Tempered Glass Excellent handling and buffing abilities. The buffing results are equivalent to polishing with #10,000~#12,000 grit sandpapers or buffing with a polishing compound. Made with tempered glass. Can be washed with water with no concern of corrosion. * comes with a plastic protection box.  * do not drop this item as it may shatter. always put the item back into its protection box after use * not intended for polishing metal materials