Products

Cang Toys GMS-006 Fu Xi Starry Sky Class (Deluxe Edition) Model Kit The Cang Toys GMS-006 Fu Xi is a 1/100 scale original mecha model kit from the Starry Sky class within Cang Toys' War of the God series. Inspired by the legendary Chinese mythological figure Fu Xi, the design combines ornate mechanical armor with Chinese cultural motifs - including Bagua (Eight Trigrams) iconography on its shields and shoulder armor - and pairs the mecha with a fully articulated companion dragon unit called the Sui Long (Shattered Dragon). Cang Toys is a Chinese manufacturer known for both their Transformers-adjacent combiners and their War of the God original mecha line, which draws from Chinese mythology and features alloy-reinforced construction across the range. Key Features Pre-Built Alloy Inner Skeleton: The internal frame arrives pre-assembled in alloy and POM composite, providing structural rigidity and joint retention without requiring skeleton assembly. Sui Long Companion Dragon: Includes a fully articulated dragon unit approximately 70 cm in length, connected via double ball joints throughout the body for flexible posing. The dragon can operate independently, combine with the mecha's backpack for a merged flight mode, or attach via a segmented mechanical neck for a human-dragon fusion configuration. Bagua Shield with Gear Mechanism: Two detachable Bagua shields feature an internal gear system - rotating any single blade causes the central Bagua emblem to rotate in sync, and vice versa. Multiple Display Configurations: Supports humanoid mode, backpack-equipped flight mode with wing effect parts (wingspan exceeding 40 cm), and a combined human-dragon fusion form. Full Color Separation by Parts: All color separation is achieved through individual part molding rather than stickers or paint, with foil stickers and two water decal sheets provided for detail enhancement. Cockpit with Pilot Figure: An openable chest hatch reveals an internal cockpit with a seated pilot figure. Display Stand with Nameplate: Includes a dedicated display base with a metal nameplate, transparent support arms for the dragon, and dual mounting points for both the mecha and dragon units. Builder Context The Fu Xi is an intermediate-level build suited for builders with some prior model kit experience. The plastic outer armor assembles via snap-fit connections with a comfortable assembly feel and no excessive force required, but the alloy skeleton and multi-form transformation system add complexity beyond a standard HG or MG Bandai kit. Cement is not required. The kit includes foil stickers for metallic accent detail and two dense water decal sheets - one dedicated entirely to the dragon unit - so builders comfortable with water slide decals will get the most out of the finished result. Why Build This Kit The Cang Toys Fu Xi is one of the few 1/100 scale mecha model kits that includes a full-size companion unit - the 70 cm Sui Long dragon effectively doubles the display footprint and gives the finished build a presence that standalone kits in this price range cannot match. The pre-built alloy skeleton eliminates the most tedious part of complex third-party builds while still delivering joint retention and weight that plastic-only frames lack, making it comparable in build feel to MG-grade Bandai kits with the added benefit of metal internals. At the current US retail price point of $70-85, Fu Xi offers substantially more content per dollar than most competing third-party 1/100 kits, which typically do not include a secondary display unit, effect parts, and a dedicated scene base. Builders interested in the War of the God series should note that Fu Xi pairs directly with the separately sold Nuwa (NVWA) kit - the two are designed as mythological counterparts with complementary dragon/snake companion units. The Bagua shield gear mechanism and multi-stage wing deployment give this kit interactive play value that goes beyond static display posing. Box Contents Fu Xi mecha runner plates Pre-assembled alloy and POM inner skeleton Sui Long (Shattered Dragon) runner plates Backpack with articulated wing units Wing effect parts (translucent) Tail fin effect part (red translucent) Twin-Blade Gun "Sui Ling" (separates into two individual weapons) Flying Blade "Ni Lin" (two units, mountable on backpack) Two Bagua shields with gear mechanism Five pairs of interchangeable hands (fists, open hands, straight-grip, angled-grip, trigger-grip) Segmented mechanical neck connector for dragon fusion mode Foil sticker sheet Two water decal sheets (one for mecha, one for dragon) Display base with metal nameplate and transparent dragon support arms Instruction manual Brand Cang Toys Series War of the God - Starry Sky Class (Deluxe Edition) Model GMS-006 Fu Xi Scale 1/100 Mecha Height Approx. 21 cm / 8.3 in (without backpack); approx. 20 cm / 7.9 in (per manufacturer spec) Dragon Length Approx. 70 cm / 27.6 in Wingspan (with effect parts) Over 40 cm / 15.7 in Materials PS, ABS, POM, PVC, Alloy Internal Frame Pre-built alloy and POM composite skeleton Assembly Snap-fit plastic armor over pre-built skeleton Product Type Plastic assembly model kit with alloy frame

Cangdao CD-AS-01 Guardian - Sentinels of Azure Dragon (Long Ji) The Cangdao CD-AS-01 Guardian - Sentinels of Azure Dragon is a plastic model kit with a pre-assembled alloy inner frame from Zen of Collectible's Four Sacred Beasts Sentinels line. The design draws heavily from traditional Chinese warrior armor, with dragon totem motifs integrated into the shoulder plates and waist armor and an overall silhouette inspired by ancient general's battle dress. This is Cangdao's first entry into the model kit format - the brand is better known for its premium 1/72 diecast action figures in the same Four Sacred Beasts universe, and the CD-AS-01 brings that design language into an accessible, builder-friendly kit. Key Features Pre-Assembled Alloy Inner Frame - The diecast skeleton comes ready to build on, providing solid joint tension and a stable, weighty feel throughout the finished model. Built-In LED Head Unit - The head features a magnet-activated LED system with two modes (steady glow and breathing pulse), powered by an AG0/LR521 battery. No light leakage reported in either head sculpt. Two Interchangeable Head Sculpts - One standard head and one alternate head with a gold oni-mask faceplate, both sharing the same LED electronics module. Modular Weapon System with Multiple Combinations - Two swords, a long halberd, and a round shield can be recombined: the halberd shaft connects to the sword blades to form a crescent blade, while the shield attaches to transparent effect parts and the halberd shaft to create a shield axe. Universal 3mm Hardpoints - Mounting ports are distributed across the entire body, allowing weapons to be attached in various configurations and enabling cross-brand accessory compatibility. Articulated Weapon Mounting Arms - Two multi-joint mechanical arms on the backpack provide additional weapon hardpoint positions with adjustable angles. Extensive Articulation - Butterfly shoulders, pull-down hip joints, two-stage knee and elbow bends exceeding 120 degrees, linked armor panels on front/side/rear skirts, and a retractable neck joint for deep head tilting. Builder Context This kit is suited for intermediate builders comfortable with standard snap-fit model kit assembly. The alloy frame comes pre-assembled, and plastic armor parts snap onto it, so no cement is required. The runner count is comparable to a standard Bandai MG kit. The PVC hand parts and ponytail may benefit from cleanup, and builders who paint will get the most out of the gold and dark gray frame parts, which show some visible flow marks in the molded color. Why Build This Kit The Cangdao CD-AS-01 Guardian - Sentinels of Azure Dragon stands out as one of very few Chinese-style warrior mecha model kits currently available, combining traditional armor aesthetics with a diecast alloy inner frame at a price point well below most alloy-frame kits on the market. At 21cm tall, it has display presence comparable to a standard 1/100 scale MG kit, and the weapon combination system offers more configuration options than most kits in this price range. Builders familiar with Bandai MG kits will find the construction approachable, though the PVC hand parts are a known weak point - wrist joints can loosen when holding heavier weapons, and experienced builders may want to reinforce the hand-to-wrist connection with a small amount of adhesive. The kit is the first release in what Cangdao has announced as a multi-unit Sentinels line with at least three additional colorway and weapon variants planned, making it a natural entry point for builders interested in the series. For builders who want a mecha kit with a distinctly Chinese design identity rather than the Japanese mecha aesthetic that dominates the market, the CD-AS-01 is currently one of the strongest options available from any manufacturer at this price tier. Box Contents Pre-assembled alloy inner frame Plastic armor runner sets (multiple runners, ABS/POM) PVC hand parts (multiple grip types) PVC ponytail parts Two interchangeable head sculpts (standard and gold oni-mask variant) LED unit with magnet control module and AG0/LR521 battery Two swords Long halberd Round shield Transparent effect parts Two multi-joint weapon mounting arms 3mm connector pegs Display base Water slide decal sheet (gold and red patterns) Marking sticker sheet Instruction manual Brand Cangdao / Zen of Collectible (藏道模型) Model Number CD-AS-01 Product Name Guardian - Sentinels of Azure Dragon (巡界使 龙戟) Series Four Sacred Beasts - Sentinels Line Kit Type Plastic Model Kit with Alloy Inner Frame Height Approximately 21cm Materials ABS, Diecast Alloy, POM, PVC LED Built-in head LED (steady and breathing modes), magnet-activated, AG0/LR521 battery Decals Water slide decals and marking stickers included Display Base Included

Supported Scales: 1/144 or 1/100 (depending on the model) Material: ABS Included: 1 x Action Base

DDB Model FM 1/100 Gundam Aerial Special Effects Parts The DDB Model FM 1/100 Gundam Aerial Special Effects Parts is a third-party aftermarket effect unit designed for the Bandai Full Mechanics 1/100 XVX-016 Gundam Aerial from Mobile Suit Gundam: The Witch from Mercury. Produced by DDB Model (also known as DDB Corgi), this set adds dynamic GUND-BIT trail effects and weapon display capability to the FM Gundam Aerial kit. Key Features Clear Blue Trail Effect Parts: Translucent blue effect parts designed to replicate the GUND-BIT deployment and energy trail effects seen in the anime series. UV Reactive: The clear blue effect parts are reactive to ultraviolet light, producing an enhanced glow effect under UV exposure. Weapons Display Stand: Includes weapon base stands for displaying the Gundam Aerial's bit staves and shield components in deployed configurations. FM 1/100 Scale Compatibility: Specifically designed and scaled for the Bandai Full Mechanics 1/100 Gundam Aerial kit. Important Notes The FM 1/100 Gundam Aerial model kit is not included and must be purchased separately. Action base is not included. Box Contents Clear blue trail effect parts 2 weapon display base stands Specifications Brand DDB Model (DDB Corgi) Scale 1/100 Compatible Kit Bandai Full Mechanics 1/100 XVX-016 Gundam Aerial Series Mobile Suit Gundam: The Witch from Mercury Effect Color Clear Blue UV Reactive Yes Base Size Approx. 16 cm x 13 cm Product Type Aftermarket effect parts / display accessory

Dents & Dings – Discounted Model Kits & Hobby Items Dents & Dings is a special clearance category featuring discounted model kits and hobby-related items that have experienced box damage or cosmetic packaging wear due to shipping, handling, returns, or storage-related incidents. These items are offered at reduced cost strictly because of their packaging condition. All contents inside are complete, intact, and unassembled. The condition issue applies only to the exterior box unless otherwise explicitly stated. Important Condition Information Condition Varies: Each variant represents a unique item with its own packaging condition. Box Damage: May include dents, creases, crushed corners, surface tears, or replaced packaging. Contents Complete: All original parts, runners, manuals, decals, and accessories are included. Sales Terms Sold As-Is: All Dents & Dings items are sold in their current condition. Final Sale: No refunds, returns, or exchanges are accepted for this category. Condition-Based Discount: Pricing reflects packaging condition only. Please review the selected variant carefully before purchase. By completing your order, you acknowledge and accept the item’s condition and the final sale terms.

DLKHobby 1/100 ZAW-S01 Ikaruga - Universal Space Type The DLKHobby 1/100 ZAW-S01 Ikaruga (Universal Space Type) is a 1/100 scale mecha model kit produced by DLKHobby (Dilei Ke) and manufactured by Dalin. Built around a precision multi-layer skeleton system, the Ikaruga features a three-stage construction sequence - core skeleton, detailed mechanical frame, then outer armor - delivering both structural integrity and visible mechanical depth at every layer. The kit ships with 99 runners and includes a first-batch bonus of two sets of transparent replacement outer armor, allowing builders to expose the layered internal frame while maintaining a finished display appearance. Key Features Multi-Layer Skeleton System: Three-stage build process starts with a core skeleton, adds a color-separated mechanical frame (frame gray, metallic gray, and iron red), then covers with outer armor - each layer visible through optional transparent armor panels First-Batch Transparent Armor: Two sets of clear replacement armor panels included, allowing partial or full swap to reveal the detailed internal skeleton Matte-Finish Outer Armor: All outer armor parts feature a factory matte coating that gives a flat-coat appearance straight out of the box, reducing visible surface imperfections Extensive Articulation with Linked Mechanisms: Double-jointed elbows with linked hydraulic piston detail, sliding hip joints with two lock positions, and double-jointed knees with armor panels that shift in sequence during bending Full Weapon Arsenal: Includes combination beam rifle, oversized extending cannon, large shield, two beam sabers with interchangeable blade lengths, and four detachable funnel/drone units that combine into multiple configurations Interchangeable Head Components: Two forehead options (spiked and smooth), two visor styles (transparent horned and green gem), and a gray transparent full-face mask for alternate display looks UV-Reactive Parts: All transparent green and yellow parts produce a fluorescent glow under UV/blacklight Builder Context The Ikaruga is an intermediate-to-advanced build with 99 runners and a multi-stage skeleton assembly. It is snap-fit construction with mostly hidden gate marks, though some parts have larger gates that require cleanup. The yellow thruster nozzles on the shoulder armor are loose-fitting and may need glue to stay secure. Builders familiar with MG-grade Bandai kits will find the complexity and part count comparable, with additional mechanical linkage details that go beyond typical Bandai engineering. Why Build This Kit The DLKHobby 1/100 ZAW-S01 Ikaruga is one of the highest-value third-party mecha kits available at its price point, offering 99 runners, a full weapon loadout, and a multi-layer skeleton system for under $90 USD. The three-stage skeleton construction gives the finished build visible mechanical depth that most 1/100 kits - including Bandai MG - do not attempt, and the included transparent armor means builders can show off the internal frame without any aftermarket purchases. At approximately 24.8 cm (9.75 inches) tall before weapons, the Ikaruga has strong shelf presence comparable to large MG kits, and the factory matte finish means the kit looks display-ready without topcoating. Builders should note that the funnel/drone weapons are heavy enough to require the included transparent support stands for stable display, and the shoulder thruster nozzles will need a small amount of glue to prevent drop-off during handling. Box Contents 99 runners (ABS/PVC construction) Two sets of transparent replacement outer armor panels Combination beam rifle (with beam saber attachment capability) Oversized extending cannon with auxiliary handles Large shield 2 beam sabers (interchangeable long and short blade parts, foldable sword/gun mode) 4 funnel/drone units (detachable, combinable into drone configuration) 5 pairs of interchangeable hands (fists, open hands, knife hands, gripping hands, gun-holding hands) 2 forehead parts (spiked and smooth) 2 visor types (transparent horned, green gem) Gray transparent full-face mask Display stand with weapon rack arms 4 transparent articulated support bases with ring attachments Waterslide decal sheet Aluminum foil detail sticker sheet Instruction manual Specifications Brand DLKHobby (Dilei Ke) Manufacturer Dalin Product ZAW-S01 Ikaruga - Universal Space Type Scale 1/100 Height Approx. 24.8 cm (9.75 in) Runner Count 99 Materials ABS, PVC Construction Snap-fit assembly, multi-layer skeleton Skeleton Colors Frame gray, metallic gray, iron red Armor Finish Factory matte coating Product Type Plastic assembly model kit

Shorter for better handling. Extra durable Each stick is labeled with its grit. Each grit is also laced with a different color in the middle of the stick. Size: 88mm x 20mm x 4mm This set comes with 4 sanding sticks: #400 x 1 - Red #600 x 1 - Blue #800 x 1 - Purple #1000 x 1 - White

EDDAS ALF-PMC-01 Salamander 1/100 Mecha Model Kit The EDDAS ALF-PMC-01 Salamander is a 1/100 scale mecha model kit from EDDAS Technology, representing a heavily customized special-operations unit built for the mercenary organization ALF. The Salamander features a reinforced zinc alloy internal frame, a high-output chest particle cannon, and an overclock system derived from the EDDAS Valkyrie series that enables short-burst triple-output combat performance. EDDAS Technology is a Chinese manufacturer known for original mecha designs with alloy-frame construction at competitive price points, with the Salamander joining their lineup alongside the Asgard and Valkyrie. Key Features Zinc Alloy Internal Frame: Pre-assembled alloy joints throughout the shoulders, elbows, knees, waist, and hips provide weight (approximately 254 g assembled) and strong joint retention across all articulation points. Beam Particle Cloak: A large translucent red energy cloak with embedded glitter particles attaches to the backpack via a three-point locking system, creating a flowing silhouette under display lighting. Composite Long Blade: A mechanical-style sword that splits at the midpoint into two independent weapons - a single-handed sword and a small axe - connected by a sliding rail system. Distributed Beam Weapons: Six beam saber hilts stored across the rear skirt and backpack, two 60mm pistols mountable on the rear skirt, and beam blade emitters on both forearms and feet with included translucent effect parts. Core Fighter Unit: An included transformable support craft that separates from the main body. Matte Surface Finish: Outer armor panels use a frosted matte texture with a blue-purple primary color scheme accented by gray and red detail separation. Comprehensive Hand Options: Four pairs of interchangeable hands (fisted, open, relaxed, weapon grip) with ball-joint wrists and independently articulated thumbs. Builder Context The Salamander is a snap-fit kit with 19 runners and does not require cement or painting for a complete build, though painting is recommended for full color accuracy on smaller details. The alloy joints require slightly more force to pose than typical plastic kits. Build complexity is comparable to a Bandai MG kit, making it suitable for intermediate builders comfortable with multi-runner assembly and water-slide decal application. Why Build This Kit The EDDAS ALF-PMC-01 Salamander is among the most affordable 1/100 scale alloy-frame mecha kits currently available from any manufacturer, with a feature set - zinc alloy skeleton, beam effect parts, display base, water-slide decals, and a separable core fighter - that typically appears in kits priced significantly higher. At 19 cm tall and 254 g, the Salamander has noticeable heft and shelf presence comparable to a Bandai MG kit, with the added weight and joint stability that comes from the metal frame. The kit is a practical entry point into the EDDAS lineup for builders who want to try alloy-frame construction without the higher investment of the Valkyrie ($65+) or Asgard ($80). Builders should note that the chest-waist alloy joint is intentionally tight and requires firm pressure to pose, and the head features two interchangeable face masks - one opaque gray for custom painting and one transparent for light-piping effects with the included foil stickers. Box Contents Salamander main body (19 runners) Pre-assembled zinc alloy joint components Beam particle cloak (translucent red with glitter) Core fighter unit Composite long blade (separable into sword + axe) 60mm caliber pistols x 2 Beam particle sword effect parts x 2 Beam particle dagger effect parts x 2 Hand beam particle sword effect parts x 2 Leg beam particle sword effect parts x 2 High-output beam particle slash effect part x 1 Interchangeable hands x 4 pairs (fisted, open, relaxed, weapon grip) Interchangeable face masks x 2 (opaque gray, transparent) Water-slide decal sheet x 1 Foil color-correction sticker sheet x 1 Telescopic display stand x 1 Display base x 1 Assembly manual x 1 Specifications Brand EDDAS Technology Model ALF-PMC-01 Salamander Scale 1/100 Height Approximately 19 cm (7.48 in) Weight Approximately 254 g (assembled) Materials ABS, PS, POM, Zinc Alloy Runner Count 19 Kit Type Snap-fit assembly, painting optional

Endless Create SR-01 Shurado Series Byaki MGSD-Style Model Kit The Endless Create SR-01 Shurado Series Byaki is a compact, highly detailed mecha model kit designed in an MGSD-style format. Produced by Endless Create, this kit features super-deformed proportions combined with dense mechanical detailing, layered armor construction, and a display-focused silhouette. Based on preview materials and retailer listings, Byaki emphasizes sharp panel separation, angular armor geometry, and a stylized heroic profile. The design prioritizes visual impact while maintaining a manageable build size compared to full 1/100 releases. Key Features MGSD-Style Design: Super-deformed proportions combined with high mechanical detail density. Original Mecha Design: Not affiliated with Bandai or any Gundam intellectual property. Layered Armor Construction: Multi-panel armor layout with stepped surface depth. High Surface Detail: Panel lines and mechanical features molded directly into parts. Display-Oriented Proportions: Designed for shelf presence and posed presentation. Visible Equipment Byaki main body components Integrated armor-mounted mechanical details Stylized weapon and accessory components as shown in preview materials Specifications Brand Endless Create Series Shurado Series Model SR-01 Byaki Scale / Format MGSD-style (non-scale) Product Type Plastic assembly model kit IP Affiliation Original design (Third Party)

Model: T09A17 Color: Red/Black/Blue/Gray 304 stainless steel blade collet, Brass chrome plated handle, All-aluminum lightweight body, low center gravity design for better handling Package Contains: Anti-rolling protection cap x 1 Galaxy Model Tools Modeler's Knife x 1 (random color) Bright & narrow edge replacement blades x 20

GM-GODOMO GM-002 Luna-Trace Model Kit The GM-GODOMO GM-002 Luna-Trace is a 1/72 scale original science fiction mecha plastic model kit. Featuring a white-and-purple color scheme with a sharp, minimalist design, Luna-Trace takes a restrained approach compared to the flashier aesthetics common in Chinese third-party mecha kits. GM-GODOMO is an emerging Chinese manufacturer whose debut product, the 1/72 Solaridian, featured a full alloy inner frame - Luna-Trace shifts to an all-plastic construction at a significantly lower price point while retaining the brand's focus on high part count engineering and layered armor design. Key Features Scale and Size: 1/72 scale, approximately 23 cm tall to the head - over 25 cm with backpack equipped. Internal Frame: Full inner frame construction designed for stable posing and structural integrity. Part Count: Over 500 parts delivering layered armor panels and mechanical surface detail. Opening Armor Sections: Multiple armor panels open to reveal internal mechanical structure. Expansion Interface: Rear universal mount designed to support future backpack and weapon expansions. Interchangeable Hands: Five pairs of hands included - open hands, sword grip, gun grip, fist, and signature posing hand. No Paint Required: Color-separated parts deliver a complete appearance straight from the box. Builder Context Luna-Trace is suited for intermediate builders comfortable with high part counts and tight-fitting assemblies. The snap-fit construction requires no cement, and the approximately five-hour build time is comparable to a Bandai MG kit. Fit is reported as tight throughout with minimal need for part modification, making it accessible despite the 500+ part count. Why Build This Kit The GM-GODOMO GM-002 Luna-Trace stands out as one of the highest value-for-parts third-party mecha kits currently available, delivering over 500 parts with a full inner frame at a domestic Chinese price of 79 RMB. For builders looking to try a Chinese third-party kit without committing to a premium price point, Luna-Trace is the lowest-risk entry point in the GM-GODOMO lineup - the Solaridian (GM-001) costs significantly more due to its alloy frame. At 23 cm to the head and over 25 cm with the backpack, the finished build has strong shelf presence for a 1/72 kit, comparable to a standard Bandai MG in height. The minimalist white-and-purple design and balanced weapon loadout give it a protagonist-mecha feel that displays well next to Real Grade or Master Grade Bandai kits. Builders should note that the beam rifle and beam sabers are the only included weapons - this is not an accessory-heavy kit, and the value proposition is in the mechanical detail and armor layering rather than weapon count. Box Contents Luna-Trace main body runners (500+ parts) Internal frame components Armor parts and external panels Beam rifle Beam sabers Five pairs of interchangeable hands (open, sword grip, gun grip, fist, posing) Instruction manual Specifications Brand GM-GODOMO Model Number GM-002 Product Name Luna-Trace Scale 1/72 Height Approx. 23 cm (head height), 25+ cm with backpack Material ABS Part Count 500+ Build Type Snap-fit plastic model kit with full inner frame Color Scheme White and purple (color-separated, no painting required) Country of Origin China Category Third-Party Mecha Model Kit

GodHand GH-PN-120 Blade One Nipper (Plastic Only) The GodHand GH-PN-120 Blade One Nipper is a single-edge precision nipper designed for clean gate cutting on plastic model kits. Built for durability and control, it includes safety-oriented features such as a blade-break prevention stopper, an over-opening prevention pin, a return spring, and an included protective nipper cap. Key Features Single-Edge Blade: Single-edge cutting design intended for cleaner cuts on plastic gates. Cutting Capacity: Supports plastic (PS, PP, ABS, PE) up to 3 mm; transparent or semi-transparent PS is limited to 2 mm. Safety and Handling: Includes a blade-break prevention stopper, over-opening prevention pin, and spring-assisted operation. Included Protection: Comes with an original protective nipper cap for storage. Specifications Brand GodHand Product Name Blade One Nipper Model Number GH-PN-120 Total Length Approx. 120 mm Weight Approx. 60 g Blade Type Single-edge Supported Materials Plastic only (PS, PP, ABS, PE) Cutting Capacity Up to 3 mm; transparent / semi-transparent PS up to 2 mm Included Protective nipper cap

Scale: 1/100 Supported Grade: MG Features: Adjustable angels Adjustable height 3 Colors to choose from

The YF-21 is an experimental variable fighter featured in the Macross Plus OVA and its theatrical adaptation, Macross Plus Movie Edition. It was part of U.N. Spacy's Advanced Variable Fighter initiative under Project Super Nova. The prototype was piloted by Guld Goa Bowman.It ultimately lost to the YF-19, although a handful of its final version were still produced under special circumstances. The YF-21 served as a prototype for the VF-22 Sturmvogel II, which later appeared in Macross 7, often used by ace pilots.

The VF-0S Phoenix is a variable fighter that appears in the Macross Zero OVA. The Northrop Grumman/Bellcom VF-0 Phoenix variable fighter was an advanced prototype for the VF-1 Valkyrie which served as a flight test unit and later in 2008 as a front-line fighter, before the Valkyrie's mass production in November 2008. The fighter was developed with OverTechnology obtained from the massive alien space ship that crashed on Earth in the year 1999.In most respects, the VF-0 resembled the VF-1 Valkyrie, although its legs were longer because the EGF-127 conventional turbofan engines used by the fighter were larger and bulkier than the VF-1's FF-2001 thermonuclear engines/ Numerous fine details also differ, such as head designs. The VF-0D's wings are very different, replacing the variable sweep wings with a canard-delta configuration; although this would perform well, it would ultimately not be adopted for the production series VF-1.

HeMoXian Over-Zero Series Boxer BAKI 1/10 Model Kit The HeMoXian Over-Zero Series Boxer BAKI is an original mecha plastic model kit from HeMoXian’s Over-Zero lineup. This is a Third Party Gundam Gunpla Like Mecha Model Kit and is not affiliated with Bandai or the Gundam franchise. Built in 1/10 scale and listed at approximately 21 cm tall, this kit is designed as a large-format build with a boxing-inspired loadout and multiple display accessories. Key Features Scale and Size: 1/10 scale, approximately 21 cm tall when assembled. Materials: Listed as ABS, PS, and TPE. Display Options: Includes a base for stable posing and display. Customization: Includes alternate face plates, interchangeable hands, and effect pieces for varied presentation. Loadout Variety: Includes multiple weapon and equipment components shown in standard retailer box contents. Box Contents Pieces to build Boxer BAKI 2 alternate face plates 3 pairs of interchangeable hands Pair of electric drills Champion gold belt Pair of Rock Crack gauntlets Blade: Cardinal T-4 Garba-IV gun Training robot 2 Butter Knife MK3 units Boxer’s uniform parts 4 hair tube parts Effect pieces Color-changing panels Water decal sheets Base Instructions Specifications Brand HeMoXian Series Over-Zero Model Boxer BAKI Scale 1/10 Height Approx. 21 cm Materials ABS, PS, TPE Markings Water decal sheets included Category Third Party Gundam Gunpla Like Mecha Model Kit Preorder Notice: This item is currently on preorder and will be shipped once available. Please be aware that cancelling a preorder will incur a 25% restocking fee. For detailed information on our preorder and cancellation policies, please visit our FAQs page.

Official Infinite Dimension Retailer LA Scale Model is an authorized retailer of Infinite Dimension. All Infinite Dimension model kits are 100% genuine and sourced directly from the manufacturer. Overview The Infinite Dimension 1/100 RT-002 Nemesis is a flagship mecha model kit from the Advanced Strategic Revenge Titan (A.S.R.T.) series, released to mark Infinite Dimension's 10th anniversary under the In ERA+ product line. As only the second standalone Infinite Dimension kit after the original Genesis, the Nemesis represents the brand's most ambitious engineering effort to date - featuring a triple-layer build architecture, 14 pre-painted metallic runners, and a weapon system built around eight transformable Vengeance Blades that double as deployable wing units. Infinite Dimension is a premium Chinese mecha brand known for intricate mechanical sculpting and complex layered internal frames, operating alongside its collaboration sub-brand Infinite Nova. Key Features Triple-Layer Build Architecture - Assembly progresses through three distinct stages: basic skeleton, meridian frame (gold and silver mechanical detailing layer), and full exterior armor, each forming a complete display-worthy form 14 Pre-Painted Metallic Runners - Gold, silver, and rose gold metallic runners with hidden gate marks, plus matte blue-black metallic paint on dark outer armor panels, delivering display-ready color separation without painting Transformable Vengeance Blade System - Eight modular blades that convert between sword and gun modes, combinable into curved swords, spike rifles, great swords, and wing-blade formations mounted on the backpack Full Armor Deployment Mechanisms - Linked hatches across shoulders, chest, knees, calves, and rear skirt open to reveal inner frame mechanical detail, with the shoulder armor featuring synchronized four-panel deployment Backpack-Mounted Cockpit - Detailed cockpit with pilot figure, display screen sculpting, and purple transparent canopy, located in the backpack rather than the chest due to the reactor core occupying the chest cavity Functional Display Base - Included system base (30 x 22.5 cm) with weapon storage slots, maintenance arm assembly, and support rod for aerial posing Pre-Assembled Joint Option - Major joints come with optional pre-assembled POM joint units for tighter hold and better weight support, alongside traditional assembly joints for builders who prefer smoother articulation feel Builder Context The RT-002 Nemesis is an advanced-level build with an estimated assembly time of 9-10 hours across its three-layer architecture. The kit is snap-fit and does not require cement, but the POM joint assemblies can be very tight and some wrist connections may require careful tool-assisted fitting. The full-color instruction manual follows a staged build process similar to PG Unleashed, with supplementary video guides available via QR code for tricky assembly steps. Comparable in engineering ambition to Bandai's MGEX or PG Unleashed lines, the Nemesis offers a build experience that advanced third-party kit builders and experienced MG/PG modelers will find rewarding. Why Build This Kit The Infinite Dimension RT-002 Nemesis is the brand's 10th anniversary flagship and its most content-dense kit to date, making it the definitive showcase of what Infinite Dimension's engineering can deliver at the 1/100 scale. The triple-layer skeleton-to-armor build progression and 14 pre-painted metallic runners give it a premium unboxing and assembly experience that no current Bandai MG can match in structural layering, while the included commemorative artbook documents the design process from concept sketches to final tooling. At 22 cm to the head and roughly 45 cm wide with wing blades deployed, the Nemesis has dominant shelf presence comparable to a PG kit in visual footprint, despite being 1/100 scale. Builders familiar with the Einta Industries Canopy or other premium third-party kits in the $120-$200 range will find the Nemesis competitive on part count and accessory density, though they should note that the pre-assembled POM joints produce a stiff, creaky feel during posing - builders who prioritize smooth joint action should opt for the included traditional assembly joints instead. Box Contents Nemesis model runners (40+ runners including 14 pre-painted metallic runners in gold, silver, rose gold, and matte blue-black) Purple transparent parts runners Pre-assembled POM joint units (optional use) 8 x Vengeance Blade weapon assemblies (transformable sword/gun mode) Red blade components (curved sword formation) Spike gun components Wing blade components (x4) Great sword assemblies (x2, convertible to rifle mode) Shield claw assemblies (x2, claw/pincer mode switchable) Metal etching parts sheet Etched metal nameplate 3D sticker sheet Water transfer decal sheet Display base with weapon storage slots and maintenance arms Metal support rod / kickstand Cardboard runner organizer trays (x2) Full-color instruction manual with QR code video guides Commemorative design artbook (concept art, line art, development records) Brand Infinite Dimension / In ERA+ Series Advanced Strategic Revenge Titan (A.S.R.T.) Model RT-002 Nemesis Scale 1/100 Height (to head) Approx. 22 cm Height (with backpack) Approx. 27 cm Display Width (wings deployed) Approx. 45 cm Weight (full armor) Approx. 440 g Material ABS, PS, POM

Infinite Dimension IN ERA+ Trailblazer Vanguard Integrated Tactical Assault Squad 1/100 Model Kit The Infinite Dimension IN ERA+ Trailblazer Vanguard Integrated Tactical Assault Squad is a 1/100 scale original mecha model kit from the Infinity Nova line, produced under the UMD (Ultimate Minutia Design) series. Designed as an aerial and space-type combat unit, the Trailblazer features an alloy inner frame, interchangeable head components for multiple squad configurations, and a versatile loadout of melee and ranged weaponry. Key Features Alloy Inner Frame: Internal skeleton uses alloy construction for structural rigidity and secure joint retention across all articulation points. Interchangeable Squad Configuration: Swappable face plates and antenna parts allow the kit to be built as a Team 02 member, squad leader, or Team 03 member. Configuration must be chosen during assembly. Dual Combat Mode Loadout: Equipped for both melee and long-range combat with a sword, heavy blaster, and four fin blasters that double as funnel-style remote weapons. Funnel Deployment System: Four detachable funnels can be mounted on the backpack or displayed in deployed formation using the included display base arms. Full Articulation: Comprehensive joint system throughout the body allows for a wide range of dynamic posing options. High-Precision Decals: Includes water transfer decals and metallic effect marking stickers for detailed finishing. Display Base with Funnel Arms: Included base features four articulated support arms for posing funnels in deployed combat configurations. Box Contents Trailblazer main body components with alloy frame Backpack assembly 4x funnels 4x cannons Sword Heavy blaster / gun 6x interchangeable hands Interchangeable face and antenna parts (Team 02, squad leader, Team 03) Display base with 4x funnel support arms Water transfer decal sheet Metallic effect sticker sheet Instruction manual Specifications Brand Infinite Dimension Series Infinity Nova / IN ERA+ UMD (Ultimate Minutia Design) Model Trailblazer – Vanguard Integrated Tactical Assault Squad Scale 1/100 Height Approx. 19 cm Material Plastic with alloy frame Articulation Fully articulated Product Type Plastic assembly model kit IP Original third-party mecha design

Official Infinite Nova Retailer LA Scale Model is an authorized retailer of Infinite Nova All Infinite Nova model kits are 100% genuine and sourced directly from the manufacturer. Infinite Nova IN ERA+ 1/72 RMD Series F.N.R-09 Fenrir Model Kit The IN ERA+ 1/72 RMD Series F.N.R-09 Fenrir is a large-scale plastic model kit from Infinite Nova's RMD (Real Minutia Designs) collaboration line. Fenrir features an aggressive heavy-frame silhouette with layered armor construction, a segmented tail-mounted blade system, and transformable weapon configurations that shift between compact and deployed states. IN ERA+ is the premium engineering sub-brand of Infinite Nova, and the RMD Series represents their mechanically dense, high-articulation product line - Fenrir is the first 1/72 scale entry in the RMD lineup. Key Features First 1/72 RMD Release: Opening entry in the RMD 1/72 plastic model line, co-developed between IN ERA+ and Real Minutia Designs for high-density mechanical engineering. 27 cm Completed Height: Significantly larger than standard 1/72 military kits, standing approximately 10.63 inches tall with dominant shelf presence. Segmented Internal Frame: Core body uses independently moving upper torso, waist, and hip sections with pre-assembled core joints, supporting wide posing angles while maintaining structural stability. Tail-Mounted Blade System: Articulated multi-segment tail weapon with directional movement and multiple display angles, functioning as both a visual anchor and a melee weapon platform. Transformable Weapons: Main blade and rifle systems feature expandable elements designed to shift between compact storage and deployed combat states. Layered Armor Construction: Multi-layer armor panels with stepped depth, extensive panel lines, vents, and mechanical surface detailing molded directly into parts. Linked Shoulder Articulation: Multiple synchronized joints in the shoulder block allow coordinated movement between shoulder armor and arm rotation, reducing visual gaps during posing. Builder Context The Fenrir is an intermediate-to-advanced build with ABS plastic construction and pre-assembled core joints. Assembly requires nippers and basic modeling tools. The dense layered armor design and articulated internal frame provide a build experience comparable to premium 1/100 scale third-party mecha kits, compressed into a 1/72 footprint. Builders familiar with MG-grade Bandai kits or other IN ERA+ RMD releases like the Thunderbolt will find the engineering approach and part density familiar. Why Build This Kit The Infinite Nova IN ERA+ F.N.R-09 Fenrir is the first 1/72 scale kit in the RMD lineup, and at 27 cm it towers over standard 1/72 military models - its physical presence on a shelf is closer to what most builders expect from 1/100 scale kits. The segmented tail blade system and transformable weapons give the Fenrir a distinctive silhouette that sets it apart from other IN ERA+ releases like the Thunderbolt or Lizard, which focus on more conventional humanoid proportions. Builders coming from Bandai MG kits will find a comparable level of internal frame engineering and part density, but with an original mecha design and heavier armor layering than most Bandai offerings at a similar price point. The pre-assembled core joints lower the barrier to entry for builders who want mechanical complexity without the risk of fragile joint assembly, making Fenrir a reasonable starting point for the 1/72 RMD line. Builders should note that ABS construction throughout means cement is not recommended - standard snap-fit techniques apply, but sanding and cleanup benefit from ABS-appropriate tools. The third-party mecha community widely regards the Fenrir alongside kits like the Infinite Dimension RT-002 Nemesis, Motor Nuclear MNQ03-B Zhao Yun, and Einta Industries Sky Defender as a benchmark for engineering quality and presentation in original design model kits - reinforcing Infinite Nova's position as one of the highest-tier producers in the category. Box Contents Fenrir main body parts and inner mechanical frame components Pre-assembled core joint units Tail blade assembly Transformable rifle Melee blade weapon Backpack and thruster assembly Hand option parts Display base set High-precision water decal sheet Metallic foil sticker sheet 3D sticker sheet Base postcard Assembly instruction manual Specifications Brand Infinite Nova / IN ERA+ Series RMD (Real Minutia Designs) Model F.N.R-09 Fenrir Scale 1/72 Height Approx. 27 cm (10.63 inches) Material ABS plastic Product Type Plastic assembly model kit SKU id-fenrir

KOSMOS FM Aerial LED Set (Base & Premium) The KOSMOS FM Aerial LED Set is a third party LED upgrade kit designed specifically for the Full Mechanics 1/100 Gundam Aerial. It adds multi-point RGB lighting to the shell unit, shield, rifle, Gund-Bits, and thrusters, transforming the kit into a display-ready centerpiece. The system uses a compact control module and pre-wired LED harnesses, with no soldering required. Set Variants Base Set: Aerial LED Set + Shield LED Set Premium Set: Aerial LED Set + Shield LED Set + Gund-Bit LED Set Base Set – Aerial + Shield LED LED units for the Aerial main body and shell unit LED units for the shield Beam rifle lighting connection from the main harness RGB control module and power wiring Designed for builders who want core body and shield effects without Gund-Bit lighting Premium Set – Aerial + Shield + Gund-Bit LED Includes everything from the Base Set Additional LED strips or fiber runs for the Gund-Bit / BIT trail effect Connections for lighting all BIT trails arranged around the Aerial Ideal for full “permet glow” and floating weapon display layouts Product Highlights Compatible with Full Mechanics 1/100 Gundam Aerial only RGB LED system with remote control lighting modes Multi-point illumination for shell unit, shield, beam rifle, Gund-Bits, and thrusters (depending on set) Pre-wired harness and modules – no soldering required Designed to use internal routing; some minor trimming or test fitting may be required during installation Perfect for diorama, display base use, and low-light photography Installation Notes Model kit and stands are not included – this product is only the LED upgrade set. Minor internal modification may be needed to route wires and modules cleanly. Recommended for intermediate to advanced builders comfortable with test-fitting and internal trimming. Always test LEDs and controller before final assembly. Box Contents RGB control module and power leads LED units and wiring harness for Aerial main body and shell unit LED units for shield and beam rifle Gund-Bit / BIT trail LED runs (Premium Set only) Connection hardware, adapter pieces, and mounting aids Remote control (where included by production run) Installation instructions Specifications Brand KOSMOS Product FM Aerial LED Set Compatibility Full Mechanics 1/100 Gundam Aerial Power USB or battery module (depending on version) Lighting Type RGB LED with multi-mode control Base Set Coverage Aerial body, shell unit, shield, rifle link Premium Set Coverage Aerial body, shell unit, shield, rifle, Gund-Bit trails