Products

KOSMOS FM Aerial LED Set (Base & Premium) The KOSMOS FM Aerial LED Set is a third party LED upgrade kit designed specifically for the Full Mechanics 1/100 Gundam Aerial. It adds multi-point RGB lighting to the shell unit, shield, rifle, Gund-Bits, and thrusters, transforming the kit into a display-ready centerpiece. The system uses a compact control module and pre-wired LED harnesses, with no soldering required. Set Variants Base Set: Aerial LED Set + Shield LED Set Premium Set: Aerial LED Set + Shield LED Set + Gund-Bit LED Set Base Set – Aerial + Shield LED LED units for the Aerial main body and shell unit LED units for the shield Beam rifle lighting connection from the main harness RGB control module and power wiring Designed for builders who want core body and shield effects without Gund-Bit lighting Premium Set – Aerial + Shield + Gund-Bit LED Includes everything from the Base Set Additional LED strips or fiber runs for the Gund-Bit / BIT trail effect Connections for lighting all BIT trails arranged around the Aerial Ideal for full “permet glow” and floating weapon display layouts Product Highlights Compatible with Full Mechanics 1/100 Gundam Aerial only RGB LED system with remote control lighting modes Multi-point illumination for shell unit, shield, beam rifle, Gund-Bits, and thrusters (depending on set) Pre-wired harness and modules – no soldering required Designed to use internal routing; some minor trimming or test fitting may be required during installation Perfect for diorama, display base use, and low-light photography Installation Notes Model kit and stands are not included – this product is only the LED upgrade set. Minor internal modification may be needed to route wires and modules cleanly. Recommended for intermediate to advanced builders comfortable with test-fitting and internal trimming. Always test LEDs and controller before final assembly. Box Contents RGB control module and power leads LED units and wiring harness for Aerial main body and shell unit LED units for shield and beam rifle Gund-Bit / BIT trail LED runs (Premium Set only) Connection hardware, adapter pieces, and mounting aids Remote control (where included by production run) Installation instructions Specifications Brand KOSMOS Product FM Aerial LED Set Compatibility Full Mechanics 1/100 Gundam Aerial Power USB or battery module (depending on version) Lighting Type RGB LED with multi-mode control Base Set Coverage Aerial body, shell unit, shield, rifle link Premium Set Coverage Aerial body, shell unit, shield, rifle, Gund-Bit trails

KOSMOS LED Lighting System for MGEX 1/100 Strike Freedom Gundam (RGB Upgrade Kit) The KOSMOS LED Lighting System for MGEX 1/100 Strike Freedom is a third-party RGB lighting upgrade engineered to illuminate the wings, internal frame, and head unit of the MGEX Strike Freedom. Featuring multi-zone light control, redesigned transparent wing parts for better diffusion, and an app-capable controller, this kit transforms Strike Freedom into a premium display centerpiece. Product Highlights Designed specifically for Bandai MGEX 1/100 Strike Freedom Gundam RGB multi-zone lighting system — wings and head illumination Wireless controller with mobile app support for color and animation effects Replacement transparent wing effect parts included for improved light diffusion No soldering required — plug-and-wire installation system Ideal for “Full Burst Mode” or “Wings of Light” style display setups Description The KOSMOS LED Lighting System elevates the MGEX Strike Freedom beyond standard display presentation. Light channels run through the wings and head unit, allowing builders to create dynamic visual effects ranging from static illumination to flowing gradient animations. The included replacement effect parts enhance light distribution, producing a bright and clean glowing wing appearance that is ideal for shelf display or photography. This system is designed for intermediate builders familiar with LED routing inside Gunpla frames. While no soldering is needed, careful handling during assembly is recommended to prevent pinching wires between inner and outer armor layers. Installation Notes MGEX Strike Freedom Gundam model kit not included Wing effect parts included with this LED upgrade are used in place of stock clear parts Minor trimming or adjustment may be required for ideal cable routing Always test lights before final assembly Box Contents RGB LED harness for wings and head Transparent wing effect replacement parts LED control module Power supply cable (USB or battery-powered depending on batch) Wireless remote and/or app pairing instructions Mounting aids, connectors, installation guide Specifications Brand KOSMOS Product LED Lighting System for MGEX Strike Freedom Compatibility Bandai MGEX 1/100 Strike Freedom Gundam Lighting Type RGB multi-zone LED Control Wireless module with app support Installation No soldering — internal wiring route required

KOSMOS RG 1/144 God Gundam LED Set The KOSMOS RG 1/144 God Gundam LED Set is a third party RGB lighting upgrade designed specifically for the Real Grade God Gundam. This set adds dramatic illumination to the halo sheet and compatible effect parts, enhancing God Gundam’s signature attack poses and turning the kit into a striking display piece. Product Highlights RGB LED upgrade unit for RG 1/144 God Gundam Designed to light the halo sheet and compatible option parts Dedicated palm light for God Gundam’s special attack poses Additional special effect light to boost visual impact Includes metal nameplate for a premium display base finish Remote-controlled lighting with multiple modes via control module Part of the KOSMOS 30 MIN Series LED accessory lineup Description This LED set focuses on enhancing the most iconic visual elements of the RG God Gundam. The halo lighting brings depth and glow to the effect sheet, while the palm and special effect lights highlight powerful attack poses. The included metal nameplate gives the finished display a more complete and collector-focused presentation. The LEDs are pre-wired and connect to a compact power module, making installation achievable for experienced Gunpla builders without soldering. As with most LED upgrades, careful test-fitting and cable routing are recommended to avoid pinching wires during assembly. Important Notes RG 1/144 God Gundam model kit and stands are not included. This is an unofficial third party accessory, not a Bandai product. LED units should be tested before installation to confirm proper operation. Some internal trimming or careful routing may be required for the cleanest install. Box Contents Halo light set for RG God Gundam Palm light unit Special effect light unit Power supply module Remote control God Gundam metal nameplate Connection wiring and components Instruction sheet Specifications Brand KOSMOS Series 30 MIN Series LED Accessories Product RG 1/144 God Gundam LED Set Compatibility RG 1/144 GF13-017NJII God Gundam and related option parts Lighting Type RGB LED with control module and remote Included Effects Halo, palm, and special effect lighting Contents LED units, power module, remote, metal nameplate, instructions

Raven Raptor has joined Kotobukiya's world of HMM "Zoids," fully equipped with brand new armor and a Pile Bunker unit! The massively sized weapons don't compromise the awesome movability and velociraptor-like poses. The cockpit hatch on the head can be opened and closed, allowing for a pilot figure to be placed inside. The Zoid Core inside the torso can be removed. In addition to having a symmetrical design for the left and right side of the upper arms, 3mm connection points are added to the elbows for fans to have the option of adding hardpoints to this model when assembling. And don't forget about those "Counter Scythes" on the model's back! Order this awesome addition to the "Zoids" line-up today!

The LEGEND BB #397 Musha Victory Gundam is a Super Deformed (SD) model kit that reimagines the Victory Gundam with a samurai-inspired aesthetic. This kit offers a unique building experience, combining the futuristic design of the Victory Gundam with traditional Japanese warrior elements. Key Features: Scale and Materials: Non-scale model kit crafted from high-quality injection-molded plastic, ensuring durability and ease of assembly. Articulation: Features multiple points of articulation, allowing for dynamic poses that showcase its distinctive armor and weaponry. Weaponry and Accessories: Equipped with a variety of armaments, including a sword and shield, enhancing its combat-ready appearance. Design Details: Incorporates samurai armor elements, blending the mechanical aspects of the Victory Gundam with traditional Japanese warrior motifs. Release Information: Released as part of Bandai's LEGEND BB series, this kit revitalizes classic SD Gundam designs with modern engineering and enhanced detail. The LEGEND BB #397 Musha Victory Gundam is an excellent addition for collectors and builders who appreciate the fusion of Gundam's futuristic design with traditional samurai elements, offering both a rewarding build and a distinctive display piece.

The RX-78-2 Gundam is the titular mobile suit of Mobile Suit Gundam television series. Part of the RX-78 Gundam series, it was built in secret on Side 7. The Gundam would turn the tide of war in favor of the Earth Federation during the One Year War against the Principality of Zeon. It was primarily piloted by Amuro Ray. The Gundam was incredibly advanced for its time. Built from lightweight Luna Titanium Alloy, its frame was both lighter than that of Zeon's mass-produced mobile suits and much sturdier, able to shrug off a MS-06 Zaku II's machine gun fire with little to no damage. Its offensive power was above and beyond that of the Zakus. The Gundam would engage in most battles with its beam rifle, making it the first mobile suit to have firepower equivalent to a battleship's beam cannons. In addition, it made use of two beam sabers, blades of extremely hot plasma which could cut through any metal with ease. Those beam sabers could be extended into a spear-like beam javelin, which could be used to stab into an enemy from a longer distance.The Gundam also used more conventional weaponry; it could launch rockets with a "Hyper Bazooka", the Federation's answer to the bazookas used by Zeon's Zakus; in addition, its head was outfitted with a pair of small vulcan guns, as a way of attacking light-armored aircraft and vehicles without wasting ammo or energy from its more powerful armaments. It also made use of a very unconventional close-range weapon known as the "Gundam Hammer" - a large weapon similar to a flail which could be swung at enemies to deal crushing damage. The Gundam Hammer was eventually upgraded for use in space and outfitted with a number of verniers on the ball, and renamed to be the "Hyper Hammer". Lastly, it wielded a shield which would offer it a defense against enemy attacks that not even its Luna Titanium body could withstand without damage. Gundam pilot, Amuro Ray, would make use of the shield as a decoy in many battles, taking advantage of its size to fool the enemy into thinking he was charging at them, then attacking the enemy through the shield.In terms of technology, the Gundam was equipped with a sophisticated Learning Computer which would collect pilot and enemy data during skirmishes and allow the Gundam to operate more effectively. The data from the computer was used by the Federation to improve the controls of the Gundam's mass-produced form, the RGM-79 GM. In addition, it was upgraded by Federation technician Mosque Han shortly before the Battle of A Baoa Qu to improve its reaction times, the joints of the Gundam were given a Magnet Coating, based on the experimental procedure performed on the RX-78-3 "G-3" Gundam and later used on Amuro's intended successor unit, the RX-78NT-1 Gundam "Alex".The Gundam makes use of the Core Block System implemented in the other V Project units. The torso of the Gundam is mostly hollow so that a FF-X7 Core Fighter can dock with it. This allows the pilot to jettison the legs and torso of the Gundam should the machine be too heavily damaged and gives the pilot a chance to escape from battle. Later, during Operation Odessa, the Gundam is given a support unit known as the G-Fighter. The two G-Fighters were designed to take advantage of the Gundam's modular system and diversify the Gundam's role in active combat. These modes ranged from the assault bomber G-Armor to the close combat support tank G-Bull. Officially, it is called a prototype, but it is also said to be more of a custom-made machine that is finished with high quality materials and the best technology.

The RX-0 Unicorn Gundam (ユニコーン ガンダム Yunikōn Gandamu?, or Unicorn, Unicorn Gundam 01, Singularity One) is the titular prototype mobile suit of the Mobile Suit Gundam Unicorn novel, its OVA adaptation and the television re-cut. Developed by Anaheim Electronics for the Earth Federation, it concealed a secret that could shake the future of all humanity, for it was the key to opening Laplace's Box. It is piloted by Banagher Links after the head of the Vist Foundation and his father, Cardeas Vist, entrusted it to him at the dawn of the Third Neo Zeon War in U.C. 0096.Produced as the final part of the E.F.S.F's reorganization plan, the "UC Project", the Unicorn Gundam is a revolutionary design meant to be the main symbol of the project's main goal: to destroy any traces of Zeonism in the Earth Sphere. Thus, not only does it feature a Gundam design, but it also incorporates an anti-Newtype system. Two prototype machines were completed at Anaheim Electronics' factory in Granada. However, when the Vist Foundation took control of the project, they installed a special "La+ Program" OS into the Gundam, turning it into a symbol of possibility by making it the key to finding Laplace's Box: the embodied hope of the Universal Century. Featuring the most advanced mobile suit technology of the time, its performance is unmatched.Incorporating test data from the experimental MSN-06S Sinanju Stein, the Unicorn Gundam's entire frame is built with Psycho-Frame material, drastically increasing the unit's responsiveness and allowing it to be piloted like an extension of the pilot's body. While mobile suits used during the Second Neo Zeon War implemented psycho-frame technology on a limited basis, the Unicorn is the first "full psycho-frame" mobile suit. In some cases, this responsiveness is so high that the machine appears to act on its own without any actions from the pilot. In addition, the Unicorn utilizes a special system known as the "NT-D" (or Newtype Destroyer) which activates the suit's psycho-frame and dramatically increases the suit's performance.In its normal form, the "Unicorn Mode", the Unicorn Gundam's head is similar in appearance to those of Londo Bell's mass-produced mobile suits, with the addition of a single, horn-like antenna on its forehead (which gives it the name "Unicorn"). Destroy Mode is the form when Unicorn Gundam's NT-D System is activated. The transformation is marked by an expansion of the suit's frame. The armor seams separate and lock down into various hard-points, while the newly exposed psycho-frame emits a pinkish-red or greenish (Awakened) glow (attributed to the Psycho-Field phenomenon). In this mode, the Unicorn becomes taller, reveal six more thrusters, and its head transforms to one with standard Gundam features, the visor and face guard retracts into the head to reveal the twin eyes and mouth plate, and the antenna splitting into a V-fin. To prevent its transformation being interrupted, the strength of its I-Field will be increased temporarily. Additionally, a pair of sub-sensors are revealed on the shoulders, and two concealed beam sabers extend out of the backpack.In Destroy Mode, the suit's psycho-frame scans the pilot's thoughts and directly transmits them to the suit's drive system; in other words, the Unicorn can be controlled by the pilot's thoughts alone. Additionally, the mode also causes the machine's performance - in thrust, generator output, and sensory radius - to be increased to unmeasurable levels. The NT-D also allows the Unicorn to take control of an enemy's psycommu weapons (also known as "Psycommu Jack") by emitting a Psycho-Field. However, the stress placed on the mind by manipulating an object more than tenfold the size of an average human is extraordinary. Even with the aid of the psycho-frame, the pilot's mind can only endure roughly five minutes of operation before a limiter is activated, deactivating the psycho-frame and returning the mobile suit to its Unicorn Mode.With the performance limiters disengaged, the Unicorn can accelerate up to 20 G's in Destroy Mode; to alleviate such high levels of G forces placed on the pilot, a drug administration system called the "DDS" is fitted on the pilot suit. It suppresses stagnated blood circulation due to high acceleration by administering the drug to the pilot. Furthermore, the DDS activates automatically upon the detection of another Newtype via the "Intention Automatic System".

The GN-0000+GNR-010 00 Raiser (aka 00 Raiser) is the combined form of GN-0000 00 Gundam and GNR-010 0 Raiser in season 2 of Mobile Suit Gundam 00. Setsuna F. Seiei pilots the 00 Gundam and Saji Crossroad pilots the 0 Raiser, however, when combined Setsuna can operate both units himself. Despite its power, the GN-0000 00 Gundam is a highly experimental unit that suffers from power instability issues and so requires constant maintenance and fine-tuning. The Twin Drive System was also a very new technology, requiring the external stabilizing equipment on 00's main support unit, the GNR-010 0 Raiser, to safely execute Trans-Am and fully synchronize the GN Drives. Some data from GN-XXX+GNR-000 Sefer Rasiel was also exploited in its development.When combining is needed, laser guidance sensors would mutually lock onto each other, with a Haro auto-configuring the docking sequence. 0 Raiser's binders detach from the 0 Raiser body and latch onto 00's GN Drives, and its main body combines with the 00 Gundam's backpack, resulting in an angelic-like form. After successful docking, 00 Gundam's system screen(s) reflect the changes to the frame and the Twin Drive's stabilization. Each of 0 Raiser's binders can be mounted with a GN Shield to increase it's defensive capabilities, this form can remain the same even when docked onto 00 Gundam's GN Drive housing units. Without the GN Shields attached, the binders also act as shields themselves, capable of blocking beam shots from GNZ-003 Gadessa's GN Mega Launcher in Trans-Am mode.As the 00 Raiser the Twin Drive reaches 100% synchronization rate, it can achieve GN Particle generation rates far exceeding 300% during Trans-Am(700% during the first dock), and also gains the usage of the Raiser System. These feats allow 00 Raiser to fully harness its massive particle production (too much for the 00's frame to properly handle alone) and perform at peak capacity. While in Trans-Am, 00 Raiser has also been seen utilizing quantum teleportation in a few battles although the specific activation and control mechanism has not been elaborated upon.The Raiser System allows the 00 Raiser to execute powerful attacks such as a massive GN Beam Saber dubbed the "Raiser Sword", allowing for greater close combat abilities, and using Trans-Am mode with even greater power and duration. Originally requiring both of its GN Swords working with the 0 Raiser's binders to produce and control the Raiser Sword, the 00 was later equipped with a GN Sword III. This weapon was capable of harnessing the power of the Raiser System to generate a refined, more controllable version of the Raiser Sword.The power of 00 Raiser is further enhanced with the presence of an Innovator pilot. Once such a being is detected the Twin Drive can execute Trans-Am Burst, a massive flood of purified GN Particles across a massive area. With the Twin Drive's full abilities in constant demand to combat the A-Laws and Innovators, 00 Raiser became the mainstay unit to effectively combat opposing MS. Overall, 00 Raiser is a mobile suit that exceeds the performance of all others, surpassing the very concept of "Gundam".

The GNT-0000 00 Qan[T] (aka 00Q, 00 Qan[T], pronounced "Double-Oh Quanta") is the successor to the GN-0000+GNR-010 00 Raiser in Mobile Suit Gundam 00 The Movie: Awakening of the Trailblazer. It is piloted by Setsuna F. Seiei.A fifth Generation Gundam designed and tuned specifically for Celestial Being's first Innovator, Gundam Meister Setsuna F. Seiei, 00 Qan[T] is the latest mobile suit (MS) designed by Celestial Being. Its blueprints originated from an Innovators draft and were sent over from Veda/Tieria (with level 7 clearance) for Celestial Being engineers to analyze and develop. As the successor to GN-0000+GNR-010 00 Raiser, 00 Qan[T] contains an upgraded and improved Twin Drive System and possesses the new Quantum System. Whereas Zabanya and Harute were developed using parts from their predecessors, 00 Qan[T]'s was made as a new mobile suit. The development resources and focus used on 00 Qan[T] are of a higher level than the other two.The unit possesses two newly created GN Drives specifically made for its Twin Drive System. The drives are located on its back and underneath the shield respectively and were developed by a team led by Linda Vashti at Jupiter. As these newly made solar furnaces are developed with perfect synchronization in mind, no external help with stabilization is required, thus 00 Qan[T] does not need a support unit such as 0 Raiser like 00 Gundam did. They can also be directly connected with each other which would result in a higher sync rate and output, however, when used this way they become extremely hard to control. To prevent unexpected problems, they are usually kept separate.The Quantum System is also the successor to 00 Raiser's Trans-Am Burst System, which allows Setsuna to expand his quantum brainwaves. It creates a massive quantum field that extends an Innovator's consciousness to communicate with sentient minds for advanced communications. To activate the system, the Innovator pilot's quantum brainwaves must be active. Once scanned, the two GN Drives connect. Finally, large portions of Qan[T]'s armor is purged, and the condensers within the limbs and the GN Drive core extend beyond the frame of the suit.Like its predecessors (the Exia and 00), 00 Qan[T] is a close combat-oriented mobile suit. Its primary weapon is the GN Sword V, the latest in the line of dual-functioning weapons that can alternate between sword and rifle modes. A GN Shield is mounted over the left shoulder in a similar fashion to one of the GN-0000 00 Gundam's GN Drives. The shield itself can deploy 6 GN Sword Bits (stored on the sides of the shield) which serve many functions but are primarily remote blades. The Sword Bits can be attached to the GN Sword V to form either a powerful buster sword or a buster rifle for combat. For added defense, 00 Qan[T] can deploy a GN Field by placing the 6 Sword Bits in a closed spherical formation and can activate the Trans-Am System to enhance its overall capabilities.00 Qan[T] can quantize like 00 Raiser, but with improvements over the original, it is now able to execute this function at will. Unlike 00 Raiser, 00 Qan[T] is capable of quantizing not only for short distances, but all the way across the universe, which was shown when it teleported to the ELS homeworld on the far side of another galaxy. 00 Qan[T]'s Sword Bits have the ability to form a portal and aid in the process. This similar function is also present in GNW-100A Sakibure which appeared 50 years after the end of the movie.The headpiece of the 00 Qan[T] acts as a controlling device for the Sword Bits. The particle-controlling capabilities of the antennae have yet again improved, allowing the 00 Qan[T] to communicate using Quantum Brainwave interfacing. Ian Vashti has designed the head of the 00 Qan[T] to resemble Setsuna's previous Gundams, the GN-001 Gundam Exia, and the GN-0000 00 Gundam.The arm parts of the 00 Qan[T] were made to allow the 00 Qan[T] to wield it's close combat weapons to the fullest. The wrist joints were made to be so flexible that they actually could move like a human arm. The GN Condensers located within the arms have been improved, allowing GN Particles to be transferred to the weapons more smoothly and effectively than the 00 Raiser's condensers.The leg parts of the 00 Qan[T] have built-in AMBAC (Active Mass Balance Auto-Control) capabilities to allow it to achieve high maneuverability in zero-G conditions. The knee joints of the 00 Qan[T] were made to be as fluid in motion as a real human knee, with GN condensers located in them, which also improved. Some parts of the legs were developed from the GNZ series, while other parts bore massive improvements to the original parts from the 00. The remaining parts were derived from other GN Drive-equipped mobile suits.Being Celestial Being's most advanced MS to date, the 00 Qan[T] is so powerful that it could possibly have eliminated the entire ELS attack force single-handedly had Setsuna chosen not to communicate with them. However, it should be noted that this is just a hypothetical calculation by Veda. It excludes important factors such as ELS' healing abilities, and the physical impossibility of the pilot fighting without food or rest over a whole week of constant battling, making it a very difficult feat to achieve nevertheless.

The ZGMF-X10A Freedom Gundam (aka Freedom, X10A) is a mobile suit introduced in the anime Mobile Suit Gundam SEED and piloted by Kira Yamato.One of ZAFT's ZGMF-X series of Gundam units build in C.E. 71 using technology derived from the four captured Alliance's Gundam, the Freedom Gundam has Phase Shift Armor and its armaments include CIWS guns, beam sabers, shield, plasma beam cannons, railguns, and a beam rifle. When the latter three weapons are used simultaneously, the Freedom is said to be in 'Full Burst Mode'. The suit has full flight capabilities in the atmosphere and the back-mounted wings can be deployed in "High Mobility Aerial Tactics (HiMAT) Mode" to enhance its mobility in the atmosphere or in space. It also has an advanced targeting system, the Multi Lock-On System, that allows it to target and fire at multiple enemy units simultaneously. Due to its capabilities and loadout, the suit has a reputation as a specialized 'Mobile Suit Killer', but its high performance resulted in a complicated control system that demands extremely fast reaction speed and spatial awareness from its pilot.When required, the Freedom Gundam can dock with a support unit, the METEOR unit, for heavier firepower and greater speed. The Freedom Gundam has virtually unlimited combat endurance as it is equipped with a Neutron Jammer Canceller and powered by a nuclear reactor. Kira describes the suit as having over four times the power of the GAT-X105 Strike Gundam. However, what this exactly means is unclear. The Freedom Gundam is meant to operate alongside the ZGMF-X09A Justice Gundam, and they are often based on the warship, the FFMH-Y101 Eternal, which is designed specifically to maintain them. Even in CE 73, the suit is still considered by some people, such as Shinn Asuka, as the most powerful mobile suit out there. Overall, it is one of Clyne Faction's symbols of power, along with the Eternal, the Archangel, and the Justice.

The GAT-X102 Duel Gundam is a mobile suit introduced in the anime Mobile Suit Gundam SEED. It was piloted by Yzak Joule. The Duel Gundam is the first unit to be developed in the Earth Alliance's G Project series of prototype MS. Equipped with the new Phase Shift armor that makes it nearly impervious to most physical weapons, the Duel is designed as a general-purpose machine that has well-balanced performance, and also serves as a development base for the other MS in the project.The Duel's armament consists of two head-mounted "Igelstellung" 75mm multi-barrel CIWS guns, which later become standard weaponry on most Earth Alliance's suits to intercept incoming missiles and closing in enemy units, two beam sabers stored on the backpack and hand-carried for use in close combat, a 57mm high-energy beam rifle with an attached 175mm grenade launcher for ranged combat, and an anti-beam coated shield for defense. Duel also has a rail bazooka as an optional weapon, but it was taken and used by MBF-P01 Gundam Astray Gold Frame to escape from Heliopolis.After being stolen by ZAFT and damaged in battle with the GAT-X105+AQM/E-X01 Aile Strike Gundam, the suit is upgraded with the Assault Shroud. The Assault Shroud is a set of ejectable armor mounted on the Duel’s body to enhance overall combat performance. It adds a "Shiva" 115mm railgun to the right shoulder and a 220mm 5-barrel missile pod to the left shoulder for additional firepower, as well as various leg and backpack-mounted thrusters for better mobility. Although the equipment worked well in space, it performs poorly under gravity due to its bulk.

The GAT-X105+AQM/E-X01 Aile Strike is a prototype high mobility mobile suit introduced in Mobile Suit Gundam SEED. Its primary pilot was Kira Yamato before it was passed down to ace pilot Mu La Flaga. The AQM/E-X01 Aile Striker is the most commonly equipped Striker pack for the Strike as it provides the greatest versatility. Thanks to the powerful vernier thrusters built into the Aile Striker, the Strike Gundam becomes an all purpose combat mobile suit with enhanced speed and maneuverability compared to its base capabilities.Despite the strength of the thrusters, they do not perform well enough for true flight capabilities inside Earth's atmosphere. However, they do allow the Strike to glide in the air for a short time and enhance its jumping capabilities to the point that it can combat mobile suits on Guuls that are flying low. Besides the standard armament of the GAT-X105 Strike Gundam, the Aile Striker pack adds a pair of beam sabers to the suit's armament.

The GAT-X105E Strike E was a Mobile Suit introduced in the manga Mobile Suit Gundam SEED C.E. 73 Δ Astray.

The GAT-X303 Aegis Gundam is a Mobile Suit introduced in the anime Mobile Suit Gundam SEED. It is piloted by Athrun Zala. Designated as the commander unit of the Alliance's G Project due to its enhanced communication and analysis capabilities, Aegis also has heavy attack power as well as Phase Shift armor and can transform into a mobile armor (MA) due to its X300-series frame. In MA mode, it has two different sub modes, 'Cruise' and 'Attack'. When in 'MA Cruise Mode', Aegis has higher speed and acceleration, while in 'MA Attack Mode', it can destroy enemy ship/mobile suit with its "Scylla" 580mm energy cannon directly or grab onto them with its four limbs first then destroy them using the cannon. Other weaponry includes two head-mounted CIWS, a hand-held beam rifle, a shield and a beam saber in each limb.Aegis also has a large sensor unit at the top of its head and unlike most suits, its main thrusters seem to be located in the side binders on its waist. Due to the transformation system, Aegis's internal structure is more complex and it is for this reason that there are no mass production variants of the suit. The three different modes (MS Mode, MA Cruise Mode and MA Attack Mode) also means that Aegis's pilot needs to have higher skills to be able to use the suit effectively.

The GF13-001NHII Master Gundam is a mobile fighter introduced in the anime Mobile Fighter G Gundam. A state-of-the-art mobile fighter made by Neo Hong Kong, and a developmental improvement of the Kowloon Gundam. Its body is made up of DG cells, allowing it to disguise itself as the Kowloon Gundam. Although its body is made up of DG cells, it is completely controlled by Master Asia's strong mental power, so it does not self-propagate or self-evolve, and uses its abilities only for self-regeneration. This machine has strong characteristics as a dedicated fighting machine developed from the Kowloon Gundam, and its flexible joint structure and thrusters allow it to move in a variety of ways, reproducing many of the techniques of Master Asia. It is a member of the Devil Gundam Legion, and is treated as the leader of the Four Heavenly Kings subgroup that consisted of four Gundams.

The GN-0000/7S 00 Gundam Seven Sword (aka 00 Gundam Seven Sword, 00 Seven Sword), is a weapons pack/equipment variation for the GN-0000 00 Gundam that appeares in the Mobile Suit Gundam 00V side story. It is later given a additional weapon and re-designated as GN-0000GNHW/7SG 00 Gundam Seven Sword/G. With Celestial Being (CB) rebuilding their organization after their defeat in A.D. 2308, they began development of the 3.5 and 4th generation Gundams. The lone 4th generation Gundam, the GN-0000 00 Gundam, had undergone continuous beta testing of its experimental Twin Drive System by members of CB's engineering team and Tieria Erde. The original 00 Gundam was made as a close combat mobile suit, normally equipped with its GN Sword II. However, CB soon realized that the 00's basic arms would not be enough to counter the rapidly advancing mobile suits developed by the Earth Sphere Federation. Taking inspiration from the GN-001 Gundam Exia's diverse Seven Sword System, CB engineers created the Seven Sword package for the 00 Gundam, improving the units effectiveness in close combat while also attempting to stabilize the Twin Drive System.The original Seven Sword System was designed specifically for the Gundam Exia. Armed with one GN Sword, two GN Blades, two GN Beam Sabers and two GN Beam Daggers, the package was meant bring out the full close combat fighting strength of the Exia. Coupled with the close combat fighting style of its Gundam Meister Setsuna F. Seiei, Exia served its role as the close combat Gundam prior to is disappearance after A.D. 2308. Seeking to do the same with the 00 Gundam, CB engineers incorporated a mix of technologies into the 00 Gundam's Seven Sword armament. Befitting its name, the 00 Gundam Seven Sword was armed with 7 close combat weapons; the experimental GN Katars, the standardized GN Beam Sabers, the long and short GN Sword IIs, and the large GN Buster Sword.The 00's GN Beam Sabers were significantly improved from the Exia's. Originally, Exia had a set of four beam blades, a pair of daggers and a pair of normal beam sabers. While they were helpful in a few situations, the sabers' lengths were non-adjustable for differing combat situations. With that in mind, CB engineers created the beam sabers to be adjustable in length, increasing their overall efficiency in combat.The GN Katars are mounted on the sides of the 00 Seven Sword's kneecaps, which must be exchanged with the standard white kneecaps to properly holster the weapons. The design is taken from the famous Indian weapon, as well as the 00's GN Shields. The GN Katars are meant as push daggers for stabbing into an enemy. To enhance their capabilities, CB engineers equipped the katars with GN Particle infused blade edges, consisting of the material used in GN Condensers. While attacking, the particles surrounding the katar are converted to heat, and the heat is transferred to the object the katar comes into contact with. However, the heat generated by the particles can be too much for the katars themselves to tolerate. The experimental weapons inspired a line of other condenser infused weaponry for the next generation of Gundams.Taking a design cue from the Exia's GN Blades, CB engineers created the GN Sword II Long and GN Sword II Short. While both swords are physical exaggerations of the aforementioned blades, they vastly differ in function. The GN Sword II is more of a traditional broadsword, able to switch between rifle and sword mode faster than the original Exia could. The long GN Sword II focuses on ranged combat, the only such weapon in the 00 Seven Sword arsenal to do so. The drawbacks are that the long sword uses more particles and a decreased rapid fire capability. In contrast, the GN Sword II short was developed analogous to the GN Short Blade from the Exia. The shortest sword in the Seven Sword armament, the Short Sword's blade tip is attached to a wire, which can be shot out towards an enemy and retracted quickly. Despite these armaments, the signature weapon of the Seven Sword arsenal is the GN Buster Sword.At nearly the same height as the 00 Gundam, the GN Buster Sword is a massive weapon which serves multiple purposes. CB engineer Ian Vashti analyzed the Buster Sword of a GNX-607T/AC GN-XII Sword captured by Fon Spaak in the sword's development. Normally stored on the left GN Drive mount, the GN Buster Sword can expand its frame to particle vents to create a massive GN Field. The scope of the field is so large that it can protect allied suits. When the sword is actively wielded, it is a top class melee weapon. Though the array of weapons were tailored to suit the fighting style of Setsuna F. Seiei, the Meister as well as his Gundam, had been missing during the Seven Swords' development. On top of that, the pack did not stabilize the highly unstable Twin Drive System, and a separate support unit, the GNR-010 0 Raiser, was given a higher priority than the Seven Swords. However, CB hadn't forgotten about the Seven Swords configuration.After the battle with the Innovators, the 00 Gundam had taken some damage, but the greater concern was the fact that its GN Drives were critically damaged in the duel between the GN-000 0 Gundam and the GN-001REII Gundam Exia Repair II. With the 5th generation Gundams in construction, CB developed a modified version of the 00 Gundam Seven Sword, the GN-0000GNHW/7SG 00 Gundam Seven Sword/G as a test-bed for future weapons and systems.

GN-001/hs-A01 Gundam Avalanche Exia (aka Gundam Avalanche Exia, Avalanche Exia) is a variant of the GN-001 Gundam Exia appearing in the side stories Mobile Suit Gundam 00V and Mobile Suit Gundam 00V: Battlefield Record. The Gundam Avalanche Exia is the Celestial Being's Gundam Exia equipped with additional high mobility unit known as "Avalanche Unit". The Gundams have exceptional flight control capabilities through the use of GN Particles, but their speed in the atmosphere and in space are generally inferior to that of specialized high-speed units such as aircrafts. Celestial Being's general mechanic, Ian Vashti, designed and created the Avalanche Unit to grant Exia a high level of mobility comparable to an aircraft's. This concept of utilizing a mobile suit like an aircraft is very similar to the AEU's, and might have been because Ian was previously the chief mechanic of AEU's armed forces and is highly skilled in such utilization of mobile suit.The multiple parts that make up the Avalanche Unit are equipped with GN Condensers and by discharging all their stored GN Particles through various verniers simultaneously, the Avalanche Exia can achieve a higher level of mobility. Additionally, during high-speed movements, the Avalanche Exia's forearm and shoulder parts are linked together in a quasi-transformation like manner. This reduces air resistance and generates a thin GN Field on the machine's surface to control the airflow on the exterior. The name, Avalanche, carries the meaning of "passing by in an instant, consuming everything in its path" and like its name, the mobile suit can outspeed the latest aerial combat mobile suits such as the SVMS-01 Union Flag, AEU-09 AEU Enact and even its fellow Gundam, the transformable, high-speed GN-003 Gundam Kyrios. The "hs" in its model number stands for "High Speed" and the "A01" means "Avalanche type Unit 1".The drawbacks of the Avalanche Exia are that it takes an hour to fully charge the Avalanche Unit's GN Condensers with GN Particles, which will be completely discharged in 10 minutes, limiting the use of the mobile suit to an extremely brief period of time and restricting its travel range. Even so, the Avalanche Exia still has high utility value as it allows the Exia to reach its combat location swiftly. While the one-hour charging time seems to make the Avalanche Exia unusable for unplanned missions, this issue is resolved to a certain degree as Ian always keeps the Avalanche Unit's GN Condensers fully charged. It is possible to extend the discharge time of the GN Particles and increase the travel range by concentrating the Avalanche Exia's supply of GN Particles to the verniers as well as lighten the Gundam by removing its armaments.The Avalanche Unit's GN Condensers are larger than regular ones and can be charged with more GN Particles. Unlike the regular GN Condensers that can display information about their status on the surface, the Avalanche Unit's GN Condensers are completely internalized and so their status are instead displayed on the Gundam's chest GN Condenser. As the Avalanche Unit's primary purpose is for high-speed movement, it does not come with additional weaponry. All the weapons of the normal Exia remain usable by the Avalanche Exia, but due to its higher speed, the Exia's characteristic seven swords have improved penetration and destructive power. To prevent the seven swords from being a hindrance during high-speed movements, they are all stored on the Avalanche Exia's upper body, with the majority mounted on a pair of weapon holders known as "Weapon Arms".The Avalanche Exia was seen relatively early during Celestial Being's armed interventions, and the Avalanche Unit's weight is kept below 5 tons as that was initially thought to be the maximum possible weight without negatively affecting the Gundam's balance. However, this assumption was later found to be wrong, and additional equipment is developed for the Avalanche Exia, resulting in the GN-001/hs-A01D Gundam Avalanche Exia', which is better adapted for operating in space. To prevent the Avalanche Unit from being a dead weight after use, its parts can be instantaneously purged from the Exia prior to the Gundam engaging in close combat.

The GN-003 Gundam Kyrios (aka Gundam Kyrios, Kyrios) is a mobile suit featured in season one of Mobile Suit Gundam 00 and is piloted by Allelujah Haptism. In AD 2307, the paramilitary organization, Celestial Being, deployed four third-generation Gundams with the objective of eradicating world conflicts through armed interventions. The Gundam Kyrios is one of them and its most prominent feature is a transformation mechanism for switching between MS Form (also known as "MS Mode") and Flight Form (also known as "Flight Mode", "Flight Position") which was tested by its predecessor, the second-generation GNY-003 Gundam Abulhool. The Kyrios' mobility and maneuverability are greatly enhanced in Flight Form, exceeding those of the other Gundams and mobile suits utilized by the three major powers. The transformation mechanism also grants high operability, allowing Kyrios to carry another mobile suit on top during Flight Form and a partial transformation where its upper body turns into that of the MS Form's is also possible. Like its fellow Gundams, Kyrios has a semi-perpetual GN Drive in the center of its body that provides almost limitless energy and produces special, multifunctional GN Particles.Mobile suits capable of switching between MS and Flight Forms are also deployed by two major powers, but they are not designed with mid-air transformation in mind like Kyrios. The old VMS-15 Union Realdo and AEU-05 AEU Hellion (belonging to the Union and AEU respectively) have incomplete transformation mechanisms, requiring parts swapping in designated facilities to operate in the different forms; although their respective successor, the SVMS-01 Union Flag and AEU-09 AEU Enact, can transform in mid-air, this is achieved through a piloting technique known as "Graham Maneuver" (also known as "Graham Special") and not an inherent feature. On the other hand, the Kyrios has a complete transformation mechanism enabled by a control system using the special GN Particles. As a result, not only can Kyrios freely transform within and outside of the atmosphere, it also gains mobility, maneuverability and versatility that greatly surpassed those of other mobile suits with Flight Forms. It should be noted that Kyrios' transformation still requires some degree of piloting skills, but can theoretically be performed by anyone.The Kyrios' cockpit is similar to other Gundams', but the control system differs due to its Flight Form and the pilot seat can rotate to match the different forms. Another feature that takes into account the Flight Form's design is the mounting of Kyrios' main thrusters, a pair of GN Verniers, on the outer side of each leg. Such a layout is rare for Gundams, where the main thrusters are often located on the back and waist, and ensures the verniers face backward to generate high thrust during Kyrios' Flight Form. The GN Verniers create thrust by releasing GN Particles, and have a mechanism whereby their cores are revealed when being activated and when increasing their output. While all Gundams can fly due to the use of GN Particles, only Kyrios can achieve high-speed flight due to its more aerodynamic shape while in Flight Form. Various sensors are built into the Flight Form's nose unit, giving it high detection capabilities. Due to the nose unit and stabilizer being folded onto the back while in MS Form, the conical rear cover of the Kyrios' GN Drive has a flatter end than the other Gundams'.Light purple-colored "GN Cables" in various body locations facilitate the supply of GN Particles to each part of the Kyrios and for attitude control purposes via the particles' mass manipulation ability. These GN Particles are also utilized for beam weaponry, generation of defensive GN Field barrier, and stealth purposes as they can cause electromagnetic interference, leaving conventional communications and radar devices useless. Additionally, by maximizing its particle emission and deploying them in front of itself, Kyrios can conduct atmospheric entry on its own. This is because the emitted particles can shield the Kyrios from the aerodynamic heating caused by the adiabatic compression during the entry process. A pair of torso-mounted clavicle antennas serves as the primary control device for these special particles, and GN Condensers are placed throughout the body to store excess particles, ensuring a reserve that the Kyrios can rely on when its operation consumed more particles than what the GN Drive can produce instantaneously. All these GN Particles related features are also found on the other Gundams.Compared to other Gundams, Kyrios' armament configuration is simple and consisted of GN Beam Submachine Gun, GN Shield, GN Beam Sabers and GN Vulcans, but its high mobility enabled it to display high combat capabilities. It can also mount optional weapons in the form of GN Hand Missile Units, Tail Unit equipped with various missiles and air-to-surface bombs, and Tail Booster with large GN Verniers and GN Cannons. Its MS Form has a balance of ranged and melee combat capabilities, with destructive power comparable to its fellow Gundams, while its Flight Form excels at high-speed hit-and-run attacks. With the Tail Unit attached, the Flight Form can adapt to a variety of missions, and when fitted with the Tail Booster instead, the Flight Form's mobility and firepower are boosted. Like its fellow Gundams, the Kyrios can activate the "Trans-Am System" during an emergency, boosting its thrust and defensive strength, as well as increase its output to three times that of its normal specifications for a limited time period. The Kyrios also glows red as a side-effect, but this system is a double-edged sword as the machine's performance drops dramatically once it ends.Optional add-on equipment was also developed, namely the Gust equipment that changes Kyrios into the GN-003/af-G02 Gundam Kyrios Gust, which has enhanced mobility, long-range attack capabilities and can operate at up to 600km in the thermosphere. Celestial Being was defeated by the UN Forces in AD 2308 and the HRL acquired the wrecked Kyrios, minus its GN Drive that was ejected prior to capture. A reborn Celestial Being then surfaced in AD 2312 with new Gundams including the transformable GN-007 Arios Gundam, Kyrios' successor with superior specifications. Around the same time, the Earth Sphere Federation's autonomous peacekeeping force, the A-Laws, deployed the new GNX-704T Ahead developed by former HRL engineers; these engineers were selected as the developers partly because the HRL seemingly gained an edge in mobile suit development through the tests they conducted on the Kyrios. Feedback from the data of the captured Kyrios was later utilized by former AEU and Union engineers in the development of the transformable GNX-903VS Brave (Standard Test Type) and its commander variant, which were deployed by the Earth Sphere Federation in AD 2314.

GNT-0000/FS 00 Qan[T] Full Saber (aka 00 Qan[T] Full Saber, pronounced "Double-Oh Quanta Full Saber") is a variant of the GNT-0000 00 Qan[T]​ that appeared in Mobile Suit Gundam 00V: Battlefield Record. The 00 Qan[T] Full Saber is the 00 Qan[T] equipped with the GN Sword IV Full Saber equipment, which is supposed to function like the GNR-010 0 Raiser, to adjust the synchronization of GNT-0000 00 Qan[T]​'s twin drive system. However, since tests showed that the Qan[T]'s GN drives can be be fully synchronized without the need of adjustments, the GN Sword IV Full Saber became unnecessary and is not equipped on the suit even though it has been manufactured. Unlike the backpack-like structure used in the normal 00 Qan[T]​, a more traditional cone GN Drive chassis is used on the Full Saber. Both the GN Sword IV Full Saber and the GN Shield are physically connected to this alternate backpack in a style more reminiscent of its predecessor 00 Raiser. As a result, the GN Sword IV Full Saber on the right side can help to balance out the GN Shield on the left and thus maintain the suit's balance during combat. The 00 Qan[T] Full Saber setup is also equipped with two new weapons. First is the GN Sword IV, which can transform into 5 different modes for carrying different kinds of attacks. Second is the GN Gunblades, three dagger-like blades attached to the GN Sword IV which can be used in three different forms.

The Astray Red Frame Kai is the upgraded version of the MBF-P02 Gundam Astray Red Frame developed and piloted by Lowe Guele. It first appeared in the photo series Mobile Suit Gundam SEED VS Astray. An upgraded form of MBF-P02 Astray Red Frame developed by Lowe after his first encounter with LN-GAT-X207 Nebula Blitzs, the major change to the suit is the replacement of the Red Frame's backpack with Tactical Arms IIL and its mount. Besides the two head-mounted "Igelstellung" 75mm multi-barrel CIWS, Tactical Arms IIL and "Gerbera Straight" katana, Red Frame Kai is also equipped with "Tiger Pierce" Katana. It no longer uses the physical shield and the beam torch component of Tactical Arms IIL replaces the Type 71 beam rifle.Like MBF-P03R Gundam Astray Blue Frame 2nd Revise's Tactical Arms II, Tactical Arms IIL can also transform into multiple forms, with each form granting Red Frame Kai unique abilities. Compared to Blue Frame 2nd R's Tactical Arms II, Tactical Arms IIL only retains the Sword form and a slightly altered Flight form. The other 4 forms, Arrow form, Work form, V form, and Delta form are new.Other than these different forms, Tactical Arms IIL can also function as a "Maga no Ikutachi" Energy Absorption Claw and as a DRAGOON. The beam torch component can be detached and used as a welding tool or a beam rifle by adjusting its output. Tactical Arms IIL is a product of all Lowe's knowledge however its multiple forms and functions also increase the chance of it malfunctioning and make its maintenance difficult.