Products

The ZGMF-X09A Justice Gundam is a mobile suit introduced in Mobile Suit Gundam SEED and it is piloted by Athrun Zala. One of ZAFT's five ZGMF-X Gundam units produced in CE 71 using technology derived from the four captured Alliance's Gundam, the Justice Gundam's main feature is the Fatum-00 unit on its back. This complex armament unit normally serves as the main thrusters, granting overwhelming acceleration as well as mobility when deployed horizontally and this configuration is also known as 'High-Mobility Aerial Tactics (HiMAT) Mode'. It also grants flight capabilities in the atmosphere and can be deployed as a separate unmanned unit or a subflight unit. It is armed with beam cannons and machine guns.Other weapons of the Justice included beam sabers, beam rifle, shield, beam boomerangs and head-mounted CIWS guns. In comparison to the other ZGMF-X Gundam units, the Justice's armament is relatively simple and pales in firepower compared to its sibling, the ZGMF-X10A Freedom Gundam. However, the Justice's true value lies in its incredible mobility and the various tactics it can employ using the Fatum-00. It can also dock with a support unit, the METEOR unit, for heavier firepower and greater speed, and has an advanced targeting system, the Multi Lock-On System, which allows it to fire at multiple enemy units simultaneously.Justice also has a tall sensor spine on the top of its head, similar to that of the GAT-X303 Aegis Gundam, and this enhances its ability to collect information in the battlefield. It is designed to be operated alongside the Freedom and for this purpose, the warship Eternal is designed specifically to maintain both suits. Like the four other ZGMF-X Gundam units, Justice is armored with Phase Shift Armor and has virtually unlimited combat endurance as it is powered by a nuclear reactor thanks to the Neutron Jammer Canceller.

The ZGMF-X13A Providence Gundam is a mobile suit introduced in the anime Mobile Suit Gundam SEED and is piloted by Rau Le Creuset. Like the other ZGMF-X series of Gundams created by ZAFT in CE 71, the Providence is equipped with Neutron Jammer Canceller and powered by a nuclear reactor. It is also armored with Phase Shift armor and features armaments reverse engineered from the stolen mobile suits of the Earth Alliance. Initially designed as a close combat unit with large beam sabers, the Providence is later changed into a DRAGOON system equipped unit when Rau Le Creuset is designated as its pilot and because it could be powered by the nuclear reactor, but it still retains the heavy armor of the former's design. As this change is made after the main body's design is completed, some of the new parts could not be integrated into the body. An example is the six quantum communication cables running from the backpack to the chest that are mounted externally due to lack of interior space. Though exposed, these cables still have solid protection as they are covered by Phase Shift armor.The DRAGOON system is the Providence's main weapon and is first tested on the YMF-X000A Dreadnought Gundam. It allows pilot with high spatial awareness, like Rau, to control multiple wireless guided weapon pods through quantum communication, hence enabling a single mobile suit to simultaneously battle with multiple enemies and attack from multiple directions, including its blindspot. The Providence's DRAGOON system is mounted on the large backpack and the hips, and includes 11 weapon pods that mount a total of 43 beam gun. Paired with the Multi Lock-On System, it is virtually impossible for these weapon pods to miss its mark. The suit's backpack has thrusters of different sizes to prevent loss of mobility caused by added weight of the DRAGOON Systems. Other armaments of the suit include four CIWS guns, a shield with two beam guns and a large beam saber, and a hand-carried large beam rifle. It was considered one of the most powerful mobile suits in C.E.71.

The ZGMF-X19A ∞ Justice Gundam (aka Infinite Justice, Justice) is the successor to the ZGMF-X09A Justice Gundam introduced in the anime Mobile Suit Gundam SEED Destiny. It is piloted by Athrun Zala. Developed as a successor to the ZGMF-X09A Justice Gundam, the ZGMF-X19A ∞ Justice Gundam also incorporates technology from ZAFT's Second Stage Series such as the Variable Phase Shift armor. Adjustments were made to reflect Athrun Zala's combat data, practically making the ∞ Justice his dedicated mobile suit. The ∞ Justice's close combat capability is enhanced over its predecessor's and is armed with a number of unique weapons such as leg beam blades and a carrier beam shield that is a combination of a beam shield, a beam boomerang and a grapple stinger.The ∞ Justice carries on its back a flight unit that can be deployed as a separate support unit/subflight unit. This Fatum-01 is an improved version of the original Justice's Fatum-00 with higher overall performance, and is armed with a pair of beam cannons as well as several beam blades. The suit can dock with the METEOR unit for additional firepower as well as speed, and can fire at multiple enemy units simultaneously using the Multi Lock-On System. As with the Justice, ∞ Justice is design to operate alongside another mobile suit, in this case, the ZGMF-X20A Strike Freedom Gundam, and is stationed on board the warship Eternal. Like the Strike Freedom, the ∞ Justice is equipped with Neutron Jammer Canceller, Hyper-Deuterion Engine, and has joints as well as inner frame made of PS armor materials.The Hyper-Deuterion Engine is a new type of nuclear reactor and due to its massive output, the ∞ Justice has extremely high mobility and maneuverability. Meanwhile, the phase-shifting of its joints and inner frame as a result of the PS armor materials give them strength and near human flexibility while also enhancing the suit's combat abilities. Additionally, the ∞ Justice is able to discharge excess residual energy within the body through the joints' glowing effect, which is silver instead of Strike Freedom's gold. The ∞ Justice has a shorter V-fin than its predecessor as the performance of the sensor unit within the head crest has been greatly enhanced.

The ZGMF-X42S Destiny Gundam is the titular mobile suit of Mobile Suit Gundam SEED Destiny and was piloted by Shinn Asuka. A straight-built Gunpla version is piloted by Shimon Izuna in Gundam Build Fighters Try. The ZGMF-X42S Destiny Gundam is a high performance general-purpose MS commissioned by ZAFT Chairman Gilbert Durandal, who ordered it to be incorporated with the most advanced technology of the time, including technologies banned by the Junius Treaty. Based on the ZGMF-X56S Impulse Gundam and Shinn Asuka's combat data, it is designed to handle any combat situations with a single set of varied armament, a concept first tested on the ZGMF-X56S/θ Destiny Impulse. For close combat, it has two beam boomerangs that double as beam sabers, a pair of palm beam cannons, and a large beam sword. For ranged battle, it is equipped with a long-range beam cannon and a beam rifle. For defense, it mounts a small physical shield as well as two beam shield generators. Lastly, the suit has a standard set of CIWS.For the Destiny Gundam to use its variety of weapons effectively and quickly, it needs to have a wider range of body movements as well as be more flexible. To achieve a wider range of body movements, the suit's basic structural components are split into smaller, movable pieces, while its armor is divided into smaller pieces in a manner similar to that of the ZGMF-X20A Strike Freedom Gundam's. The exposed gaps in the armor due to smaller armor pieces are remedied by mapping out the ranges of motion of the frame using Shinn's combat performance to determine the most efficient way to separate the armor parts. This ensures the wider range of body movements do not compromise defensive power. To be more flexible, the Destiny's joints are constructed of the same materials found in Phase Shift armor. This allows the joints to possess near-human flexibility when phase-shifted and a faint metallic glow is produced when discharging excess residual energy within the body through the joints. Through these measures, the suit met its requirements, however, various problems remain to be solved, including maintenance problems and production issues.Other special aspects are the Destiny's use of the new Voiture Lumiere propulsion system and the use of Mirage Colloid to create illusionary copies of itself. Destiny's Voiture Lumiere propulsion system is installed in the wings, which are improved version of the ZGMF-X10A Freedom Gundam's wings, and will produce a special light effect known as Wings of Light during high speed movements. The Voiture Lumiere propulsion system is frequently used alongside the Mirage Colloid to confuse the enemy as the real Destiny sets up for a high-speed attack. Like the ZGMF-X666S Legend Gundam, the Destiny Gundam is powered by the Hyper-Deuterion Engine and armored with Variable Phase Shift armor. Although classified as a "Second Stage Series" mobile suit, as indicated by the "S" in its model code, the Destiny should be a "Third Stage Series" instead based on its performance. This is done to hide the fact that it is a nuclear-powered suit and should have an "A" instead.

The Master Grade (MG) ZGMF-X42S Destiny Gundam is a 1/100 scale kit released in 2007.

The ZGMF-X56S/α Force Impulse Gundam is a Mobile Suit introduced in the anime Mobile Suit Gundam SEED Destiny. It is piloted by Shinn Asuka and later by Lunamaria Hawke. The ZGMF-X56S/α Force Impulse Gundam is the ZGMF-X56S Impulse Gundam equipped with the α Force Silhouette pack. The Force Impulse is a general purpose MS like the original Impulse, but has extremely high mobility under gravity and in zero gravity due to the Force Silhouette's high output thrusters and large wings. This pack also enables atmospheric flight, and adds a pair of beam sabers to the Impulse's standard armaments, granting the Force Impulse high melee and ranged combat capabilities. The Force Impulse is the most commonly used form of the Impulse due to its high versatility, and it is said that its aerial combat capabilities are equivalent to the ZGMF-X10A Freedom Gundam's. The Force Impulse retains the same VPS colors as the original Impulse.

The 侍ノ弐 Sengoku Astray Gundam (戦国アストレイ頑駄無 Sengoku Asutorei Gandamu) is a Gunpla that appears in the anime Gundam Build Fighters. Based on the MBF-P02 Gundam Astray Red Frame it is built and controlled by Nils Nielsen. Based on the MBF-P02 Gundam Astray Red Frame that appeared in the Gundam SEED Astray series, this Gunpla is built by Nils Nielsen and embodies his love of his Japanese heritage. Aesthetically, it greatly resembles a samurai, with an enlarged V-fin that is modeled after the Crest-horn and additional facial scrupling that is modeled after a men. The Red Frame's original faceplate is hidden underneath this extra plating and can be revealed if the extra plate is destroyed. Armed with two swords and a shield, the Sengoku Astray is also uparmored, with the new shoulder armor containing a pair of hidden arms and thrusters at the back. With its swords, the Sengoku Astray can not only launch shock waves, but also cut through beam attacks and particle barrier. The Gunpla has a special melee attack, the ‘Particle Fa Jin', that allows it to destroy an opponent from within.

Total Effect Parts x 54 MG Sazabi Ver.Ka Jet Effect Parts x 6 Launch Effect Parts x 6 RE/100 Nightingale Jet Effect Parts A x 6 Jet Effect Parts B x 6 Launch Effect Parts x 6 General Rail Effect Parts Small x 6 Middle x 6 Large x 6

The System-∀99 ∀ Gundam (pronounced as "Turn A Gundam", aka "∀", "White Doll" or "Mustache") is the titular mobile suit of Turn A Gundam. It is piloted primarily by Loran Cehack. The Turn A Gundam was originally created for interstellar warfare in anticipation of invasion of forces outside the solar system and said to be the culmination of super-advanced technologies from generations past. As opposed to other weapons which were created to meet a specific purpose, the Turn A's design was unusual and built entirely on the premise of "single-machine operation", with the versatility to perform all military operations on its own. Owing to the fear of extrasolar forces, the Turn A was constructed with all restrictions of the development of weapons removed, and as a result no longer fits into the concept of a weapon.Unlike other mobile suits (even those that predate the Turn A itself), the Turn A is powered by a DHGCP (Discontinuous Hyperoscillation Gauge Collapsing Pile) power plant in its abdomen, which is essentially an artificial black hole. This is used in conjunction with an innovative reactionless I-Field Beam Drive system to move the suit's limbs and provide thrust. As a result, the unit's chest is almost entirely hollow and can equip various weapons inside, such as missiles or beam cannons. The legs are also hollow due to the use of the I-Field Beam Drive, and contain an array of thruster vanes which are used to power the suit's jumps and flight. This leaves the back of the unit free to store more weapons and equipment if desired. The Gundam's armor is also covered with self-repairing nanomachines, dubbed "Nanoskin".The Turn A's armaments consisted of a beam rifle, two beam cannons, two beam sabers and a shield. It can also mount various weapons (such as missiles) in the chest to compliment its basic weaponry. It can also use a powerful I-Field capable of covering a large area and affecting matter. To further enhance its combat power, the Turn A has support areas called DOC Bases (Device Operation Control) which hold various armaments, enabling it to adapt to the situation at hand by equipping a variety of weapons. One of these DOC Bases was discovered in C.C. 2345. However, the base had been sealed and not maintained by any nanomachines during the thousands of years the Turn A was buried, so almost all its weapons crumbled upon exposure to air. The only weapon still usable was a hyper hammer that was simple and thick enough to remain intact for a short while without maintenance.The Turn A's on-board nanomachines are capable of a devastating attack known as the "Moonlight Butterfly" (named after the visual appearance of the attack). The Turn A's nanomachines have the ability to disintegrate all matter that includes artificial objects as well as organic materials, and can merge with weather systems to create large ionic storms capable of covering a much wider area. These nanomachines can be used offensively or defensively for all range attack and defense. The nanomachines are capable not only of destroying technology however, but of maintaining and repairing it too. This ability is not instantaneous though, and it requires a considerable amount of time. The back weapon pallet of the Turn A was originally planned to be equipped with weapons based on the Seventh Generation Minovsky Physical Theory (7th-GMPT), a nondestructive MS-incapacitating technology, during the conceptual phase of the "System ∀". However, the development of such weapons was not completed in time for the demonstration test for "System ∀", and so beam sabers were provisionally installed for melee combat.

The RX-0 Unicorn Gundam (ユニコーン ガンダム Yunikōn Gandamu?, or Unicorn, Unicorn Gundam 01, Singularity One) is the titular prototype mobile suit of the Mobile Suit Gundam Unicorn novel, its OVA adaptation and the television re-cut. Developed by Anaheim Electronics for the Earth Federation, it concealed a secret that could shake the future of all humanity, for it was the key to opening Laplace's Box. It is piloted by Banagher Links after the head of the Vist Foundation and his father, Cardeas Vist, entrusted it to him at the dawn of the Third Neo Zeon War in U.C. 0096.Produced as the final part of the E.F.S.F's reorganization plan, the "UC Project", the Unicorn Gundam is a revolutionary design meant to be the main symbol of the project's main goal: to destroy any traces of Zeonism in the Earth Sphere. Thus, not only does it feature a Gundam design, but it also incorporates an anti-Newtype system. Two prototype machines were completed at Anaheim Electronics' factory in Granada. However, when the Vist Foundation took control of the project, they installed a special "La+ Program" OS into the Gundam, turning it into a symbol of possibility by making it the key to finding Laplace's Box: the embodied hope of the Universal Century. Featuring the most advanced mobile suit technology of the time, its performance is unmatched.Incorporating test data from the experimental MSN-06S Sinanju Stein, the Unicorn Gundam's entire frame is built with Psycho-Frame material, drastically increasing the unit's responsiveness and allowing it to be piloted like an extension of the pilot's body. While mobile suits used during the Second Neo Zeon War implemented psycho-frame technology on a limited basis, the Unicorn is the first "full psycho-frame" mobile suit. In some cases, this responsiveness is so high that the machine appears to act on its own without any actions from the pilot. In addition, the Unicorn utilizes a special system known as the "NT-D" (or Newtype Destroyer) which activates the suit's psycho-frame and dramatically increases the suit's performance.In its normal form, the "Unicorn Mode", the Unicorn Gundam's head is similar in appearance to those of Londo Bell's mass-produced mobile suits, with the addition of a single, horn-like antenna on its forehead (which gives it the name "Unicorn"). Destroy Mode is the form when Unicorn Gundam's NT-D System is activated. The transformation is marked by an expansion of the suit's frame. The armor seams separate and lock down into various hard-points, while the newly exposed psycho-frame emits a pinkish-red or greenish (Awakened) glow (attributed to the Psycho-Field phenomenon). In this mode, the Unicorn becomes taller, reveal six more thrusters, and its head transforms to one with standard Gundam features, the visor and face guard retracts into the head to reveal the twin eyes and mouth plate, and the antenna splitting into a V-fin. To prevent its transformation being interrupted, the strength of its I-Field will be increased temporarily. Additionally, a pair of sub-sensors are revealed on the shoulders, and two concealed beam sabers extend out of the backpack.In Destroy Mode, the suit's psycho-frame scans the pilot's thoughts and directly transmits them to the suit's drive system; in other words, the Unicorn can be controlled by the pilot's thoughts alone. Additionally, the mode also causes the machine's performance - in thrust, generator output, and sensory radius - to be increased to unmeasurable levels. The NT-D also allows the Unicorn to take control of an enemy's psycommu weapons (also known as "Psycommu Jack") by emitting a Psycho-Field. However, the stress placed on the mind by manipulating an object more than tenfold the size of an average human is extraordinary. Even with the aid of the psycho-frame, the pilot's mind can only endure roughly five minutes of operation before a limiter is activated, deactivating the psycho-frame and returning the mobile suit to its Unicorn Mode.With the performance limiters disengaged, the Unicorn can accelerate up to 20 G's in Destroy Mode; to alleviate such high levels of G forces placed on the pilot, a drug administration system called the "DDS" is fitted on the pilot suit. It suppresses stagnated blood circulation due to high acceleration by administering the drug to the pilot. Furthermore, the DDS activates automatically upon the detection of another Newtype via the "Intention Automatic System".

The ZGMF-X20A Strike Freedom Gundam (aka Strike Freedom, Freedom) is the successor of the ZGMF-X10A Freedom Gundam introduced in the anime Mobile Suit Gundam SEED Destiny. It is piloted by Kira Yamato. A mobile suit tuned to meet Kira Yamato's needs, the Strike Freedom has Variable Phase Shift armor, and like its predecessor, ZGMF-X10A Freedom Gundam, is primarily armed with powerful ranged weapons. Its armaments include head-mounted CIWS, an abdomen-mounted multi-phase beam cannon, hip-mounted railguns, combine-able beam sabers and beam rifles, DRAGOON pods controlled by the new Super DRAGOON system and beam shields. It is powered by the new Hyper-Deuterion Engine, and is also equipped with the Neutron Jammer Canceller and the Voiture Lumiere propulsion system.Due to Kira's stellar piloting, his mobile suit is rarely hit during combat and thus Strike Freedom's design emphasizes maneuverability over its armor's defensive capabilities, though beam shields were installed as a compensatory defensive measure. As a result, its armor is split into smaller pieces to improve the movement range of the joints (a similar armor-splitting system was also implemented in ZGMF-X42S Destiny Gundam). To compensate for exposing more of its internal parts, the suit's internal skeleton and joints adopted PS armor materials. When these parts phase-shift, they gain strength and near human flexibility. Additionally, excess residual energy within the body can be discharged through the joints' glowing effects.The internal PS armor materials also help to withstand the massive output and Gs caused by the Hyper Deuterion engine and the new propulsion system, playing a role in increasing Strike Freedom's mobility. However, the main contributor to the MS's superior mobility are the mobile weapon wings, which can be deployed in the "High Mobility Aerial Tactics (HiMAT)" Mode to enhance the suit's mobility in the atmosphere or in space. The wings also features a variant of the "Voiture Lumiere" propulsion system, which can generate a visual effect called the "Wings of the Skies" similar to ZGMF-X42S Destiny's Wings of Light and is used as a means of high speed movement.The Strike Freedom's Super DRAGOONs are based on ZAFT's second generation DRAGOON system, with additional unique modifications. Designed for Kira's use, they allow him to hit more targets at once using the Multi Lock-On System and Full Burst Mode as compared to when he was piloting the original Freedom. They also grant Kira the ability to hit the enemy from multiple directions remotely. Like the Freedom, Strike Freedom is designed to operate alongside another mobile suit, in this case, the ZGMF-X19A ∞ Justice Gundam and is stationed on board the warship Eternal. It also has full flight capabilities in the atmosphere and can dock with the METEOR unit to further augment its firepower.

Bandai MGSD Gundam Barbatos The Bandai MGSD Gundam Barbatos brings the ferocity of the ASW-G-08 from Mobile Suit Gundam: Iron-Blooded Orphans into the MGSD line, a premium SD-scale kit that merges Master Grade engineering with Super Deformed styling. At approximately 115 mm tall, this kit features full articulation, metallic gloss injection parts, and sophisticated gimmicks that allow dramatic posing and weapon configuration. Product Highlights MG-level internal Gundam Frame engineered for SD scale Four-axis head and neck movement, torso swing, independent knee and ankle gimmicks :contentReference[oaicite:2]{index=2} Clear molded parts on chest, knees and shoulders for reflective effect, and Real Metallic Gloss injection parts for high-shine detail :contentReference[oaicite:3]{index=3} Includes iconic weapons: 300mm Smoothbore Gun (folding / storage gimmick), Mace with four-blade deploy gimmick, Sword, and full backpack weapon mount :contentReference[oaicite:4]{index=4} No glue required; fully snap-fit construction Description With its compact size and impressive mechanical detail, the MGSD Gundam Barbatos redefines what an SD kit can be. The internal frame supports wide range movement including full split, kneeling poses, and dramatic stances. The included weapons can be mounted or stored, and the clear/metallic parts deliver a premium visual finish straight out of the box. Whether you display it in its standard form or with weapons deployed, this kit stands out on any shelf. It’s perfect for modelers who want high engineering in a smaller footprint, and collectors who appreciate quality articulation and detail in SD form. Box Contents Gundam Barbatos model parts (MGSD series) 300mm Smoothbore Gun ×1 Mace ×1 Sword ×1 Backpack weapon mount parts Decal sheet Instruction manual Specifications Brand Bandai Spirits Series MGSD (Master Grade SD) Mobile Suit ASW-G-08 Gundam Barbatos Scale / Size SD (approx. 115 mm height) Material Injection-molded plastic with metallic/clear parts Release Date 2023-10 (approx.)

Bandai MGSD Gundam Aerial The Bandai MGSD Gundam Aerial blends high-end Master Grade (MG) engineering with the Super Deformed (SD) aesthetic, bringing the hero mobile suit from the Mobile Suit Gundam: The Witch From Mercury series into a premium model kit form. With a detailed internal frame, metallic components, clear shell parts for transformation, and full articulation, this kit offers both aesthetic appeal and dynamic poseability. Product Highlights High-density internal frame using metallic silver parts and multi-colored molding Sliding and moving armor components enable expressive knee bends and aerial poses Clear shell parts included to recreate the “Permet Score Six” blue shell mode Shield unit composed of GUND-Bits with deployable bit and staff formations Includes beam rifle, two beam sabers, shield with GUND-Bits, and effect parts Snap-fit construction, color-separated parts — minimal painting required Description This MGSD kit elevates the SD Gundam experience by integrating advanced MG technology in a compact form. The internal frame supports full articulation, while clear and metallic shell components add layers of visual depth. The “Permet Score Six” mode is achieved by replacing the outer shell, giving a striking alternate appearance. Whether you’re posing it mid-air, in dynamic kneel, or in its bit-staff formation, the Gundam Aerial stands out as a display piece for modelers seeking engineering sophistication in SD scale. Ideal for both experienced builders and those exploring higher-end SD kits, this model offers a rewarding build with standout features — from moving armor and a mechanical lens system to the expressive breakdown of GUND-Bits in the shield unit. It combines charm, detail, and mechanical realism in one package. Box Contents Gundam Aerial model parts (MGSD line) Beam Rifle ×1 Beam Sabers ×2 Shield unit with GUND-Bits Permet Score Six shell unit set Effect parts set Marking sticker sheet Instruction manual Specifications Brand Bandai Spirits Series MGSD (Master Grade SD) Mobile Suit Gundam Aerial (XVX-016) Scale / Size SD (Super Deformed scale) Material Injection-molded plastic with metallic internal frame parts Release Date 2025 (approx.)

The ZGMF-X10A Freedom Gundam (aka Freedom, X10A) is a mobile suit introduced in the anime Mobile Suit Gundam SEED and is piloted by Kira Yamato. One of ZAFT's ZGMF-X series of Gundam units build in C.E. 71 using technology derived from the four captured Alliance's Gundam, the Freedom Gundam has Phase Shift Armor and its armaments include CIWS guns, beam sabers, shield, plasma beam cannons, railguns, and a beam rifle. When the latter three weapons are used simultaneously, the Freedom is said to be in 'Full Burst Mode'. The suit has full flight capabilities in the atmosphere and the back-mounted wings can be deployed in "High Mobility Aerial Tactics (HiMAT) Mode" to enhance its mobility in the atmosphere or in space. It also has an advanced targeting system, the Multi Lock-On System, that allows it to target and fire at multiple enemy units simultaneously. Due to its capabilities and loadout, the suit has a reputation as a specialized 'Mobile Suit Killer', but its high performance resulted in a complicated control system that demands extremely fast reaction speed and spatial awareness from its pilot.When required, the Freedom Gundam can dock with a support unit, the METEOR unit, for heavier firepower and greater speed. The Freedom Gundam has virtually unlimited combat endurance as it is equipped with a Neutron Jammer Canceller and powered by a nuclear reactor. Kira describes the suit as having over four times the power of the GAT-X105 Strike Gundam. However, what this exactly means is unclear. The Freedom Gundam is meant to operate alongside the ZGMF-X09A Justice Gundam, and they are often based on the warship, the FFMH-Y101 Eternal, which is designed specifically to maintain them. Even in CE 73, the suit is still considered by some people, such as Shinn Asuka, as the most powerful mobile suit out there. Overall, it is one of the Clyne Faction's symbols of power, along with the Eternal, the Archangel, and the Justice.

Micro Set is a very versatile decal setting solution that does several things to Microscale Decals to improve the application. Micro Set should be applied to the surface of the model where you will be sliding the decal off the paper backing. Micro Set prepares the surface with special wetting agents that cut the oils into new paint and convert the adhesive on the back of the decal to a stronger and longer-lasting one. In addition, Micro Set slightly softens the decal film to make it more flexible so that it will conform better to the model's surface. Better adhesion of the decal to the model prevents tiny air bubbles from forming and results in an invisible carrier film for the so-called "painted-on look." To apply Micro Set: Use a soft flat artist's brush and apply Micro Set where you are going to apply the decal. Then slide the decal off the backing paper using a small pointed tip synthetic bristle brush to carefully position the decal in its proper position. Blot the decal carefully with a tissue or paper toweling, being careful not to disturb its position. Allow the decal to dry overnight. It will then be ready for a protective coat of Micro Coat Flat, Satin, or Gloss.

Micro Sol setting solution is for the most difficult irregular surfaces to be found on models. It completely softens the Microscale Decal, allowing it to drape down onto the surface of the model, conforming perfectly to surface irregularities without distortion. The most amazing results in seemingly impossible places are possible because Micro Sol actually makes the decal part of the painted surface. For that reason, you should coat Micro Sol on for only a few seconds and then leave it alone. It does the work. Do not touch until the decal has dried, as the decal is very soft at this stage and could be easily damaged. For the best results, first, apply Micro Sol to prepare the surface and enhance the adhesive. Make sure the surface is free of particles that could get under the decal's film and cause a blemish. Then, when everything is dry enough that the decal will not move easily, apply Micro Sol with a small flat brush. Apply with as few strokes as possible so as not to disturb the decal. Then allow the decal to dry without disturbing it. One application is enough in most cases but, if necessary, a second application of Micro Sol can be helpful.

Ming Jiang Legend & Sunday Hobby 1/100 Xiao Yao Zi Model Kit The Ming Jiang Legend & Sunday Hobby 1/100 Xiao Yao Zi is a premium third party Gundam Gunpla-like mecha model kit combining wuxia design inspiration with mecha model engineering. It features Tai Chi motif armor, four-arm structure inspired by immortal cultivator designs, a detailed alloy + POM internal frame, and dynamic display platform accessories. Product Highlights 1/100 scale third party Gundam Gunpla-like mecha model kit Four-arm structure embodying the power of an immortal cultivator Tai Chi mechanical gourd mechanism integrates internal weapons “Heaven, Earth, Man and God” White & gold color scheme with sacred other-worldly aura design Premium display platform with lotus ascension and effect parts included Description Inspired by the immortal path and cultivator mythology, the Xiao Yao Zi model kit merges classical design themes of serenity and power with advanced mecha modeling features. The head design references a bamboo-hat silhouette, the crown echoes cultivator hairstyle, the chest core evokes a Tai Chi symbol, and the distinctive four-arm layout enables unique weapon configurations. With its combination of alloy and POM frame materials, multi-form weapons, and display accessories, this kit targets advanced builders and collectors looking for a high-end release outside the standard Bandai lines. It offers both display quality and build complexity in one elegant package. Box Contents Xiao Yao Zi model kit parts (1/100 scale) Mecha body × 1 Mecha backpack × 1 Finished frame (alloy + POM) × 1 Taiyi mechanical gourd × 1 Hand shapes × 4 pairs Spell-casting hand shapes × 1 pair Wind effect part × 1 Rain effect part × 1 Thunder effect part × 1 Lightning effect part × 1 Special effect swords × 4 Combination weapon “Tao” × 1 Platform with lotus ascension accessories × 1 Platform bracket × 1 Gourd platform bracket × 1 Weapon brackets × 4 Water sticker sheet × 1 Screen background board × 1 Instruction manual × 1 Specifications Brand Ming Jiang Legend & Sunday Hobby Model 1/100 Xiao Yao Zi Scale 1/100 Material Injection-molded plastic with alloy + POM internal frame Height Approx. 22 cm

Product Description Ming Jiang Legend & Sunday Hobby - Tengu Divine Arbitrator Product Information: Height: 1/100 Water slide decals Highly movable full-body skeleton Detailed coloring and parts separation Special Effects parts Additional Information: The product is made of plastic and ABS. It is recommended for ages 14 and up. It is a highly detailed and poseable figure.

Model: OTH-C108 Size: 9cm x 4cm x 1.3cm Polished on both sides. The green side is for fine sanding at #1000 grit and the white side is for polishing/buffing at #4000 grit.

Product Description 星甲魂将传 曹仁 From the Legend of Star General series comes this new 1/72 scale model kit of MNP-XH02A Cao Ren from Motor Nuclear. This model kit features a highly detailed mech design, which comes with a variety of accessories to build to help customize your model. Product Features 7.87 inches (20cm) 1/72 Scale Made of plastic Part of the Legend of Star General series Highly detailed Instructions may or may not include an English translation Box Contents Pieces to build Cao Ren Weapons Accessories 3 Pedestal bases Platform stand Instructions