Products

Official Nuke Matrix Retailer LA Scale Model is an authorized retailer of Nuke Matrix. All Nuke Matrix model kits are 100% genuine and sourced directly from the manufacturer. Overview The Nuke Matrix CF01 F.O.X. Long-Range Striker Unit is a 1/12 scale mecha musume model kit and the debut release in the Cyber Forest (Fantasy Girls) series. It depicts Vivienne Hayha, the Empire's top sniper and a subject of the "Maiden Project," built around a cyborg aesthetic of exposed spinal detailing and prosthetic limb parts, and armed with her signature ZERO System cross unit. Nuke Matrix is a Chinese studio whose Cyber Forest line pairs articulated mecha girl kits with dense weapon and accessory loadouts. Key Features Molded in color: Full character body pre-colored for a display-ready result without painting. Five weapons: Includes the oversized ZERO System giant cross, sniper rifle, assault rifle, dagger, and laser saber. Interchangeable face plates: Three tampo-printed faces plus four blank faces for custom expression painting. Swappable configurations: Changeable armored and standard leg-and-arm part sets for two build looks. Twelve hands: A full set of interchangeable hands for weapon holding and posing. Wide articulation: Broad range of joint motion for dynamic sniper and combat poses. Display base and wire: Dedicated action base plus posing wire included. Builder Context The CF01 is best suited to intermediate builders comfortable with mecha musume kits such as Kotobukiya Megami Device or Bandai 30 Minutes Sisters. It is a snap-fit build that needs no cement, but the small face-plate pegs, hand joints, and heavy under-gating reward patience and careful nub cleanup rather than speed. Why Build This Kit The Nuke Matrix CF01 F.O.X. Long-Range Striker Unit is the debut kit in the Cyber Forest (Fantasy Girls) line and works as the recommended entry point into the series, since it establishes the cyborg sniper aesthetic of exposed spinal detailing and prosthetic limb parts that defines the brand. At 16 cm assembled it sits in the same display class as Bandai 30 Minutes Sisters and Kotobukiya Megami Device kits, so it is a familiar size for builders already collecting mecha musume. The kit is molded in color and snap-fit, meaning no paint or cement is required for a display-ready result, though panel lining improves definition on the armor. Builders should know that Cyber Forest kits use extensive under-gating to hide nub marks, and unlike Bandai RG kits these gate points are not marked in the manual, so each part should be checked before removal. The CF01 is also the most accessory-focused kit a new Cyber Forest builder can start with, bundling five weapons including the oversized ZERO System cross alongside twelve interchangeable hands and seven total face plates. Box Contents Vivienne Hayha body x1 Changeable armored legs and arms x1 set Changeable standard legs and arms x1 set Tampo-printed face plates x3 Blank face plates x4 Interchangeable hands x12 Water decal sheet x1 Sticker sheet x1 Posing wire x1 Display base x1 Giant Cross (ZERO System) x1 Sniper rifle x1 Assault rifle x1 Dagger x1 Laser saber x1 Specifications Brand Nuke Matrix Series Cyber Forest (Fantasy Girls) Kit Number CF01 Character Vivienne Hayha Scale 1/12 Assembled Height Approx. 16 cm (160 mm) Material ABS / PVC Assembly Snap-fit, no cement required Molding Molded in color EAN (2025 re-release) 4573611690046 Backorder Notice:This item is currently on backorder and will be shipped once available. Please be aware that cancelling a backorder will incur a 25% restocking fee. For detailed information on our backorder and cancellation policies, please visit our FAQs page.

Official Nuke Matrix Retailer LA Scale Model is an authorized retailer of Nuke Matrix All Nuke Matrix model kits are 100% genuine and sourced directly from the manufacturer. Nuke Matrix Cyber Forest Cyclone Hopper Model Kit The Nuke Matrix Cyber Forest Cyclone Hopper is a highly articulated original mecha girl kit from Nuke Matrix’s Cyber Forest lineup. This is a Third Party Gundam Gunpla Like Mecha Model Kit and is not affiliated with Bandai or the Gundam franchise. The kit combines a humanoid character body with modular armor systems, a transformable combat motorcycle, and extensive wind-themed effect parts designed for high-mobility action displays. Key Features Dual Body Configuration: Includes both a human body and an armored body, allowing multiple display states. Vehicle Integration: Comes with the Storm Chaser motorcycle, designed to pair directly with the Cyclone Hopper character. Effect Parts: Includes multiple wind-based and attack effect parts such as Spines Cutter, High-pressure Air Cutter, Cyclone Kick, and spiral effects. Pre-painted Runners: Select runners are pre-painted to enhance surface detail straight out of the box. Display Support: Action base included for dynamic airborne and combat poses. Customization: Multiple face plates, hand types, feet options, and armor components included for varied expressions and setups. Compatibility: Includes three different neck joint sizes, compatible with other mecha girl kits on the market. Box Contents Human body x1 Armour body x1 Storm Chaser motorcycle x1 Insect Instrument Unit (helmet) x1 Backpack x1 Strike Trampler x2 Orthoptera Booster x2 Spines Cutter effect parts x2 Spines Cutter Mode II effect parts x2 High-pressure Air Cutter effect parts x2 QianJi Spiral effect part x1 Spiral Cut effect part x1 Cyclone Kick effect part x1 Armour hands x6 pairs Standard hands x7 pairs Pre-printed face plates x5 Blank face plates x5 Sneaker feet x1 pair Naked feet x2 pairs Cloth suit x1 set Matrix Driver - Acrididae Type I x1 Water decals x2 Action base Different size neck joints x3 Instruction manual Specifications Brand Nuke Matrix Line Cyber Forest Model Name Cyclone Hopper Product Type Third Party Gundam Gunpla Like Mecha Model Kit Decals Water decals included Pre-painted Parts Some runners pre-painted Display Base Action base included Compatibility Multiple neck joint sizes included for cross-compatibility Backorder Notice:This item is currently on backorder and will be shipped once available. Please be aware that cancelling a backorder will incur a 25% restocking fee. For detailed information on our backorder and cancellation policies, please visit our FAQs page.

Official Nuke Matrix Retailer LA Scale Model is an authorized retailer of Nuke Matrix All Nuke Matrix model kits are 100% genuine and sourced directly from the manufacturer. Nuke Matrix 1/12 Cyber Forest Fantasy Girls – Mad Wolf: Carolina Rolphe The Nuke Matrix 1/12 Mad Wolf Carolina Rolphe is a third-party mecha-girl model kit blending stylized character design with mechanical build detail. At 1/12 scale and standing approximately 16 cm tall, this kit delivers a striking figure for collectors seeking a compact but detailed build. Product Highlights 1/12 scale mecha-girl model kit from Nuke Matrix’s Cyber Forest Fantasy Girls line Height approx. 16 cm when assembled Constructed from ABS and PVC materials Fully articulated build suitable for dynamic posing and display Color-separated plastic parts for a clean build without painting (optional painting enhances detail) Mecha-girl styling that combines character appeal with mechanical design Box Contents Carolina Rolphe main body parts Accessories and mechanical parts (as per standard Mad Wolf kit configuration) Decal / sticker sheet Instruction manual Description Carolina Rolphe’s Mad Wolf kit captures the feral aesthetic of the “Mad Wolf” archetype while maintaining the flexibility and customization common to third-party mecha-girl model kits. With clean part separation and solid articulation, this kit is suitable both for display and for further customization or painting. Whether built as-is or customized, this kit offers a balance of mecha-girl character styling and mechanical structure, making it a versatile foundation for any collection that includes original-IP or third-party mecha kits. Specifications Brand Nuke Matrix Series Cyber Forest Fantasy Girls Model Mad Wolf: Carolina Rolphe Scale 1/12 Height Approx. 16 cm Material ABS, PVC Kit Type Third-party mecha-girl model kit Backorder Notice:This item is currently on backorder and will be shipped once available. Please be aware that cancelling a backorder will incur a 25% restocking fee. For detailed information on our backorder and cancellation policies, please visit our FAQs page.

Official Nuke Matrix Retailer LA Scale Model is an authorized retailer of Nuke Matrix All Nuke Matrix model kits are 100% genuine and sourced directly from the manufacturer. Nuke Matrix 1/12 Cyber Forest Fantasy Girls Shadow: Yefuna Malkina The Nuke Matrix 1/12 Cyber Forest Fantasy Girls Shadow: Yefuna Malkina is a third-party mecha-girl model kit combining articulated mechanical build with stylized figure design. Once assembled, the kit offers high poseability, multiple accessories, and versatile customization — a standout addition for collectors of original-IP mecha kits. Product Highlights 1/12 scale mecha-girl model kit from Nuke Matrix’s Cyber Forest Fantasy Girls lineup Fully articulated build for dynamic posing and display Includes a variety of weapons and accessories for customization and combat-style display Color-separated plastic parts for clean build appearance Designed for hobby builders and mecha-girl collectors seeking flexibility and style Box Contents Yefuna Malkina main body and mechanical parts Weapon and accessory set (as included in standard Shadow kit) Decal / sticker sheet Instruction manual Description Shadow: Yefuna Malkina merges mechanical aesthetics with a mecha-girl character design. The kit’s articulation and accessory load allow for a wide range of dynamic poses — from relaxed stances to combat-ready configurations. With its balance of character styling, mechanical detail, and build flexibility, this model kit suits both display-oriented collectors and customizers who enjoy customizing loadouts and poses. Specifications Brand Nuke Matrix Series Cyber Forest Fantasy Girls – Shadow Model Yefuna Malkina Scale 1/12 Kit Type Third-party mecha-girl model kit Material Plastic (color-separated runners) Articulation Full articulation (arms, legs, waist, etc.) Backorder Notice:This item is currently on backorder and will be shipped once available. Please be aware that cancelling a backorder will incur a 25% restocking fee. For detailed information on our backorder and cancellation policies, please visit our FAQs page.

Official Nuke Matrix Retailer LA Scale Model is an authorized retailer of Nuke Matrix All Nuke Matrix model kits are 100% genuine and sourced directly from the manufacturer. Nuke Matrix 1/12 Cyber Forest Fantasy Girls - Tanya Charybdis (Storm Interceptor: Royal Enforcer) The Nuke Matrix CF04 Tanya Charybdis "Storm Interceptor: Royal Enforcer" is a 1/12 scale mecha-girl model kit from the Cyber Forest Fantasy Girls series. What sets this kit apart from standard mecha-girl kits is the included S.I.R.E.N. (Storm Interceptor Royal Enforcer) unit - a killer whale-type combat support mechanism that can either operate as a standalone aquatic mecha companion or combine with Tanya's body to form a full mermaid-mode configuration with a long articulated tail. Nuke Matrix is a Chinese manufacturer specializing in original-IP bishoujo mecha model kits, and the Cyber Forest Fantasy Girls line is their flagship series, with Tanya Charybdis being the fourth entry (CF04) following Vivienne, Amelia Hartmann, and Lirly Bell. Key Features S.I.R.E.N. Mecha Companion - Included killer whale-type combat support unit transforms into a mermaid tail when combined with Tanya's body, or displays as a standalone aquatic mecha companion Dual Display Modes - Build and display in standard combat configuration with weapons, or in mermaid mode with the S.I.R.E.N. tail attached Three Painted Face Parts - Pre-painted interchangeable faces for different expressions without requiring any painting Full Weapon Loadout - Trident, arm shield, two speakers, and microphone provide combat and performance display options Cross-Compatible Parts - Select parts are compatible with the previous Cyber Forest Harpy kit (CF03), enabling mix-and-match customization Color-Separated Runners - ABS and PVC construction with clean part separation for a strong out-of-box appearance Builder Context This kit is suited for intermediate builders comfortable with multi-part assembly and small components typical of 1/12 scale figure kits. Construction is snap-fit with no cement required, but the small scale and mecha-girl proportions demand more careful handling than standard mecha kits. The build experience is comparable to Kotobukiya's Megami Device or Frame Arms Girl lines rather than Bandai Gunpla, and builders familiar with those series will find a similar parts-count and complexity level here. Why Build This Kit The Nuke Matrix CF04 Tanya Charybdis is one of the few 1/12 scale mecha-girl kits that includes a full transformable companion unit rather than just swappable accessories, making it a significantly more complex and rewarding build than most kits in the category. The S.I.R.E.N. mermaid tail transformation gives the finished kit two distinct display profiles - a conventional armed mecha-girl and a visually striking aquatic mermaid configuration - which is unusual at any price point in the bishoujo model kit market. At approximately $85, Tanya offers more total plastic and display options than a comparably priced Kotobukiya Megami Device kit, though builders should expect tighter tolerances and smaller parts than Bandai's 30 Minutes Sisters line at this scale. The Cyber Forest Fantasy Girls series uses an original cyberpunk IP rather than licensed characters, so this kit appeals to collectors looking for something outside the Gundam, Frame Arms Girl, or Megami Device ecosystems. Builders new to Nuke Matrix should note that instructions may not include English translation and part fit can vary more than Bandai or Kotobukiya kits, so dry-fitting before final assembly is recommended. Box Contents Tanya Charybdis body parts (snap-fit assembly) S.I.R.E.N. mecha companion / mermaid tail unit Trident Arm shield 2 speakers Microphone 3 pre-painted interchangeable face parts Display stand Decal sheets x 2 Instruction manual Specifications Brand Nuke Matrix Series Cyber Forest Fantasy Girls Character Tanya Charybdis Designation CF04 - Storm Interceptor: Royal Enforcer Scale 1/12 Height (Standing) Approx. 160 mm / 6.3 in Height (Mermaid Mode) Approx. 250 mm / 9.8 in Material ABS, PVC Assembly Snap-fit (no cement required) Facial Options 3 pre-painted face parts Distributor Doyusha SKU NM60052 Backorder Notice:This item is currently on backorder and will be shipped once available. Please be aware that cancelling a backorder will incur a 25% restocking fee. For detailed information on our backorder and cancellation policies, please visit our FAQs page.

Official Nuke Matrix Retailer LA Scale Model is an authorized retailer of Nuke Matrix. All Nuke Matrix model kits are 100% genuine and sourced directly from the manufacturer. Overview The Nuke Matrix 1/12 Cyber Forest Fantasy Girls Vivienne Hayha CF01 F.O.X. Long-Range Striker Unit Ver. Arctic White Fox (極地白狐) is a limited-edition color variant of the CF01 Vivienne Hayha kit from Nuke Matrix's original Cyber Forest Fantasy Girls series. Originally released as a CJ2024 convention exclusive, this version features an arctic white color scheme across the entire runner set, replacing the standard navy and dark tones of the original CF01 with a winter-operations aesthetic. Vivienne Hayha is the Empire's top sniper and leader of Fox Team - the first character released in the Cyber Forest lineup and a successful test subject of the Empire's Maiden Project. Key Features Limited-Edition Arctic White Fox Color Scheme - Convention-exclusive white color variant with arctic-themed runner colors, distinct from the standard CF01 release 1/12 Scale, Approx. 16 cm Assembled Height - Full character body with articulated joints for a wide range of posing options Two Selectable Body Configurations - One complete body per kit with two build options for armored and standard configurations Seven Weapons Included - F.O.X. Type I sniper rifle, F.O.X. Type I assault rifle, F.O.X. Type II sniper rifle, pulse-type magnum, "My Fang" tactical dagger, Apocalyptor light sword, and the large cross unit (ZERO System) Pre-Painted and Blank Face Plates - Three tampo-printed face plates plus four blank face plates for custom painting Thermal Conversion Tactical Scarf - Cloth accessory with Fox Team insignia, designed for Vivienne's cold-environment sniper operative setting Water Decals and Crystal Stickers - Dedicated detail markings for enhanced surface detail Builder Context The Ver. Arctic White Fox shares the same snap-fit construction as the standard CF01 - no painting or cement is required, though the white color scheme particularly benefits from panel lining to bring out detail. Build complexity is comparable to a Bandai RG-grade kit. Builders familiar with Kotobukiya Frame Arms Girl or Bandai 30MS kits will find a similar construction approach. The white plastic can show nub marks more visibly than darker colors, so careful nub cleanup with a hobby knife and sanding sticks is recommended. Why Build This Kit The Nuke Matrix CF01 Vivienne Hayha Ver. Arctic White Fox is a limited-edition convention exclusive that offers a distinct arctic winter-operations color scheme unavailable in the standard CF01 release. With seven individually named weapons - two sniper rifles, an assault rifle, a magnum, a dagger, a beam sword, and the oversized ZERO System cross unit - the CF01 remains the most accessory-dense kit in the entire Cyber Forest Fantasy Girls lineup. The white color variant is especially suited to builders who want a striking shelf display that stands out alongside standard-color Cyber Forest kits, and the lighter plastic makes it an attractive base for custom paint schemes. As a limited release, the Arctic White Fox version is not expected to be restocked once current inventory is sold through, making it a collector-focused purchase. Builders new to Nuke Matrix should know that face plate pegs and hand joints on Cyber Forest kits are smaller and more delicate than Bandai equivalents, so dry-fitting before final assembly is recommended. Box Contents Main body parts in arctic white color scheme (one complete body, two selectable body configurations) Pre-painted face plates x3 Blank face plates x4 Interchangeable hand parts x12 Cable part x1 Large cross unit (ZERO System) x1 F.O.X. Type I sniper rifle x1 F.O.X. Type I assault rifle x1 F.O.X. Type II sniper rifle x1 Pulse-type magnum x1 "My Fang" tactical dagger x1 Apocalyptor light sword x1 Thermal conversion tactical scarf x1 Display base and support arm x1 Water decal sheet x1 Crystal sticker sheet x1 Instruction manual x1 Specifications Brand Nuke Matrix Series Cyber Forest Fantasy Girls Character Vivienne Hayha Unit Designation CF01 F.O.X. Long-Range Striker Unit Version Ver. Arctic White Fox (極地白狐) - Limited Edition Scale 1/12 Assembled Height Approximately 16 cm Materials ABS, PVC Product Type Plastic Model Kit (Assembly Required) Decals Water decals and crystal stickers included Display Base Included Backorder Notice:This item is currently on backorder and will be shipped once available. Please be aware that cancelling a backorder will incur a 25% restocking fee. For detailed information on our backorder and cancellation policies, please visit our FAQs page.

Official Nuke Matrix Retailer LA Scale Model is an authorized retailer of Nuke Matrix All Nuke Matrix model kits are 100% genuine and sourced directly from the manufacturer. Nuke Matrix 1/12 Mad Wolf Night Shadow Demon Wolf The Nuke Matrix 1/12 Mad Wolf Night Shadow Demon Wolf is a limited special edition release in the Cyber Forest Fantasy Girls lineup. This premium third party Gundam Gunpla-like mecha model kit features a dramatic Night Shadow color theme and partial iridescent coating on selected armor sections for a striking display finish. Product Highlights Special Edition: Night Shadow Demon Wolf color variant 1/12 scale third party Gundam Gunpla-like mecha model kit Limited-edition release with exclusive color styling Full color separation for clean visual presentation Partial iridescent spray finish on selected armor pieces Medium panel-line complexity suitable for most hobby builders Includes water-slide decals for enhanced detail Special Edition Features Unique Night Shadow Demon Wolf themed armor and color layout Enhanced iridescent surface finish for premium visual effect Exclusive parts and color palette specific to this limited version Complete color separation for a polished build out of the box Box Contents Mad Wolf Night Shadow Demon Wolf model kit parts (1/12 scale) Special-edition armor parts with iridescent effects Fully color-separated part runners Water-slide decal sheet Instruction manual Description This special edition of the Mad Wolf design introduces a bold Night Shadow-themed appearance, emphasizing darker tones, metallic accents, and iridescent highlights on key armor panels. The kit retains the mechanical styling and articulation seen across the Cyber Forest Fantasy Girls series, providing a versatile build suitable for display or dynamic posing. With its polished finish, distinctive color separation, and limited-edition styling, the Mad Wolf Night Shadow Demon Wolf variant offers a standout presence in any mecha model collection. It's designed for builders who enjoy detailed mechanical kits with unique visual themes. Specifications Brand Nuke Matrix Series Cyber Forest Fantasy Girls Edition Special Edition / Limited Edition Theme Night Shadow Demon Wolf Scale 1/12 Color Separation Complete Panel-line Complexity Medium Surface Finish Partial iridescent coating Includes Decals Water-slide decals included

The Orange Cat Industry Tekkaman Blade D-Boy is a snap-fit plastic model kit of the title hero from the 1992 Tatsunoko Production anime Space Knight Tekkaman Blade, the armored form that protagonist Takaya Aiba (D-Boy) transforms into. Officially licensed by Sotsu and Tatsunoko, the kit reinterprets the originally rounded anime design as a massive, sharp-edged mecha with oversized shoulder armor, slim high-heeled feet, and opening shoulder cannons. Orange Cat Industry is a Chinese model-kit maker known in the third-party scene for character kits outside the Gundam universe, and the D-Boy was among its first officially licensed IP releases. Key Features Standout size - the finished build stands roughly 22 cm (8.6 in), taller than a typical 1/100 Master Grade Gundam. Sharp-edged redesign - the rounded anime silhouette is reworked into an angular, sci-fi mechanical look with enlarged shoulders and high-heeled feet. Tek Lancer - the signature double-bladed lance displays as a single pole-arm or splits into a dual-wield pair. Tek Shield - a removable shield that mounts on the forearm or stows on the rear waist via swap parts. Opening shoulder cannons - both shoulders open to reveal internal clear-green detail for recreating the Voltekka firing pose. Perfect color separation - full color break-up straight from the runners with no correction stickers or decals required. Stand adapter included - a crotch-mounted adapter terminates in an octagonal peg compatible with Bandai 1/100 universal action bases (base not included). Builder Context This is a snap-fit kit with a simple internal structure comparable to a Bandai HG-grade build, completable in roughly 3-4 hours out of the box and approachable for beginners through experienced builders. The soft plastic makes nub removal easy and the keyed, chamfered connectors are forgiving, though painters should note that the slim pegs and recessed panel lines reward some pre-build prep. Why Build This Kit The Orange Cat Industry Tekkaman Blade D-Boy is one of the few officially licensed plastic kits of the Space Knight Tekkaman Blade hero, making it the primary option for builders who want the character as a buildable kit rather than a pre-painted figure. At about 22 cm it finishes taller than an 18 cm 1/100 Master Grade Gundam, giving it strong shelf presence despite an HG-level assembly difficulty of roughly 3-4 hours. Because the kit has complete color separation and no stickers, a straight build looks display-ready, and most builders only add a panel-line wash and a flat topcoat to finish it. Buyers should know the soft plastic trades durability for easy trimming: the red knee armor is loose enough to drop off during handling and benefits from reinforcement, and the slim connector pegs can snap if pressed in misaligned. Articulation is strong in the arms and legs, but the torso has only a single waist joint and the head cannot tilt fully upward, so the kit displays best in grounded action poses rather than extreme dynamic ones. Box Contents Tekkaman Blade (D-Boy) main body Tek Lancer double-bladed lance (single or dual-wield configuration) Tek Shield with forearm and rear-waist mounting swap parts Two pairs of replacement hands Stand adapter (Bandai 1/100 universal base compatible) 14-page instruction manual Specifications Manufacturer Orange Cat Industry Series Space Knight Tekkaman Blade (1992, Tatsunoko Production) Character Tekkaman Blade / D-Boy (Takaya Aiba) License ©Sotsu / Tatsunoko Production Height Approx. 22 cm (8.6 in) Material Multi-color injection-molded runners (ABS-based) with clear green parts; no soft-PVC parts Runners Approx. 16 (per builder reports) Assembly Snap-fit; no adhesive required Color Separation Full; no stickers or decals included Instruction Manual 14 pages Build Time Approx. 3-4 hours (straight build) Backorder Notice:This item is currently on backorder and will be shipped once available. Please be aware that cancelling a backorder will incur a 25% restocking fee. For detailed information on our backorder and cancellation policies, please visit our FAQs page.

Robox Animation RB-P-02 Cantonese Heavy Utility Vehicles Guangdong Cockroach Model Kit The Robox Animation RB-P-02 Guangdong Cockroach is a large-scale, highly articulated original mechanical creature model kit designed as a heavy-duty utility and assault platform. Inspired by industrial machinery and insect-based biomechanics, this kit features a multi-segmented body structure, oversized armor shells, and extensive mechanical detailing throughout the internal and external assemblies. Key Features Oversized Mechanical Insect Design: Cockroach-inspired silhouette with reinforced armor plating and articulated limbs. Large Finished Size: Assembled length exceeds approximately 14 inches, creating a strong visual presence. Multi-Joint Articulation: Segmented legs, body sections, and appendages allow for crawling, climbing, and attack poses. Modular Armor Construction: Layered shell components reveal internal mechanical structures. Transformable Components: Rear shell and body segments support expanded and combat-ready configurations. Industrial Aesthetic: Heavy machinery styling combined with bio-mechanical detailing. Mechanical Systems and Effects LED Lighting Unit: Integrated LED system for the core and sensor areas. Rotating Head Assembly: Head unit supports directional posing and attack orientation. Expandable Wing and Shell Mechanisms: Armor panels deploy to simulate combat and movement states. Rear Exhaust and Thruster Details: Mechanical exhaust structures integrated into the back assembly. Accessories and Included Parts Main cockroach mechanical body components Multi-segment articulated legs Expandable armor shell parts LED lighting unit Internal mechanical frame components Effect and detail parts Instruction manual Specifications Brand Robox Animation Model RB-P-02 Guangdong Cockroach Product Line Cantonese Heavy Utility Vehicles Scale Non-scale Material ABS plastic Lighting LED unit included Assembly Type Plastic model kit Backorder Notice:This item is currently on backorder and will be shipped once available. Please be aware that cancelling a backorder will incur a 25% restocking fee. For detailed information on our backorder and cancellation policies, please visit our FAQs page.

Overview The SNAA 1/100 XH-01 Hunt and Kill Hunting Falcon (Revived Version) is a revised color variant of the first mecha in SNAA's original Star Spirit (星魂系列) series. This version features a reworked white, purple, and blue color scheme developed in response to community feedback on the original release. SNAA (also known as Super Nova) is a Chinese third-party mecha brand recognized for original IP designs with engineering quality comparable to MG-grade Bandai kits. Key Features Revised Color Scheme: Updated white, purple, and blue color separation refined from fan feedback on the original Hunting Falcon release. Fully Articulated Internal Skeleton: Plastic inner frame provides a wide range of dynamic posing options across all major joints. Transformable Floating Cannon: Backpack-mounted floating cannons can combine into a double-headed spear for close-combat configurations. Deployable Claw Shield: Arm-mounted pincer shield unfolds into a laser bow weapon mode. Extensive Effect Parts: Includes booster thrust effects and beam shot effects in multiple sizes for dynamic display. 29 Runners: High part count delivers detailed color separation and mechanical complexity at 1/100 scale. Builder Context This is an intermediate-level snap-fit kit that requires no glue. The 29-runner part count and internal skeleton construction are comparable to Bandai Master Grade kits in complexity and scale. Panel lining and decal application are recommended to bring out the detail in the color-separated armor panels. Box Contents Pieces to build XH-01 Hunting Falcon (Revived Version) Floating cannon assembly Claw shield / laser bow weapon Antenna spear Funnel units (x4) with support rods (x8) Interchangeable hands (x8) Booster effect parts (large x4, small x4) Beam shot effect parts (large x4, medium x2, small x4) Display stand Water-slide decal sheet Assembly instructions Specifications Brand SNAA Series Star Spirit (星魂系列) Model Number XH-01 Scale 1/100 Height Approx. 20 cm / 7.87 in (without antenna or backpack) Material ABS / PS injection plastic Runners 29 Construction Snap-fit (no glue required) Decals Water-slide SKU SNAA-XH-01-Rev Backorder Notice:This item is currently on backorder and will be shipped once available. Please be aware that cancelling a backorder will incur a 25% restocking fee. For detailed information on our backorder and cancellation policies, please visit our FAQs page.

Official SNAA RetailerLA Scale Model is an authorized retailer of SNAA. All SNAA model kits are 100% genuine and sourced directly from the manufacturer. SNAA 1/100 YR-04 Fire Lord – Phantom Flame Soul Ver. Limited Edition The SNAA 1/100 YR-04 Fire Lord Phantom Flame Soul Ver. Limited Edition is a premium third party Gundam Gunpla-like mecha model kit designed for collectors who want a high-impact display piece. This exclusive edition upgrades the Fire Lord platform with iridescent and titanium-silver pre-coated armor, expanded flame weapon forms, and a refined finish only available in the limited release. Product Highlights Limited Edition release with exclusive pre-coated metallic finish 1/100 scale third party Gundam Gunpla-like mecha model kit Iridescent silver and titanium-silver pre-sprayed armor panels Over 800 parts for a deep, detailed build experience Enhanced flame-themed armament with multiple awakening forms Highly articulated internal frame for dynamic display options Pre-Coated Armor Panels Light cyan armor replaced with iridescent silver pre-coat Light gray armor replaced with titanium silver pre-coat Armament Phantom Flame Cloak × 1 Guardian Shield × 1 Awakening: Burning Flight Shield × 1 Phantom Flame Burning Star Spear × 1 Awakening: Phantom Flame Spear × 1 Awakening: Burning Star Spear × 1 Burning Flame Spikes × 2 Awakening: Burning Flame Blades × 2 Burning Heaven Slash × 2 Blazing Flame Fangs × 2 Description This Limited Edition Phantom Flame Soul version enhances the Fire Lord with upgraded metallic finishes and an expansive set of flame-powered weaponry. The layered armor, awakening weapon modes, and dramatic Phantom Flame Cloak combine to create a commanding silhouette on any display shelf. With high articulation, detailed mechanical structure, and broad weapon transformation options, the Fire Lord Phantom Flame Soul Ver. Limited Edition caters to advanced modelers who appreciate expressive posing, premium finishes, and collectible-quality third party Gundam Gunpla-like mecha kits. Box Contents YR-04 Fire Lord Phantom Flame Soul Ver. Limited Edition model kit parts Phantom Flame Cloak Guardian Shield Burning Flight Shield (Awakening) Phantom Flame Burning Star Spear Phantom Flame Spear (Awakening) Burning Star Spear (Awakening) Burning Flame Spikes × 2 Burning Flame Blades (Awakening) × 2 Burning Heaven Slash × 2 Blazing Flame Fangs × 2 Instruction manual Specifications Brand SNAA Model Series Emperor / Royal Series Edition Limited Edition Model YR-04 Fire Lord – Phantom Flame Soul Ver. Scale 1/100 Part Count Over 800 parts Material Injection-molded plastic with pre-coated metallic finishes Backorder Notice:This item is currently on backorder and will be shipped once available. Please be aware that cancelling a backorder will incur a 25% restocking fee. For detailed information on our backorder and cancellation policies, please visit our FAQs page.

Official SNAA Retailer LA Scale Model is an authorized retailer of SNAA. All SNAA model kits are 100% genuine and sourced directly from the manufacturer. SNAA 1/100 YR-05 Nether Emperor A.P. TYPE The SNAA 1/100 YR-05 Nether Emperor A.P. TYPE is the fifth entry in SNAA's Emperor Series of 1/100 scale original mecha model kits. Unlike the Fire Lord (YR-04) and its heavy flame-effect armor loadout, the Nether Emperor takes a stripped-back approach - prioritizing mobility, posability, and a clean silhouette over raw part volume. SNAA is a Chinese manufacturer known for original mecha designs across their Emperor Series (1/100) and Round Table Knights (1/144) lines. Key Features Slim, High-Mobility Design - Breaks from the heavy backpack and multi-layer armor approach of previous Emperor kits in favor of a streamlined, posing-friendly silhouette Full Inner Frame - Complete articulated skeleton with cockpit hatch that slides open, waist rotation of approximately 45 degrees, and hip joints with pull-down extension for expanded leg range of motion Swappable Accent Colors - Includes both green and orange energy-frame accent parts that can be exchanged or mixed across the armor Ghost Mask Faceplate - Alternate head option featuring a spectral mask design, swappable with the standard face Dual Antenna Colors - Yellow and blue antenna options included for head customization Combinable Weapon System - Thunder Pulse laser gun, Instant Flash Broken Blade with extendable tip, and a retractable bayonet that draws from its scabbard - all weapons connect via adapter keys with angled articulation and can mount on the rear waist for storage Pre-Colored Runners and Snap-Fit Assembly - Molded color separation delivers a display-ready build out of the box with over 350 parts across ABS, POM, and PVC materials Builder Context The Nether Emperor is suited for intermediate to advanced builders. The inner frame joints run tight during assembly and require firm pressure to seat properly, though the outer armor panels fit more smoothly. Construction is snap-fit with no cement required, and the pre-colored runners mean no painting is needed for a complete-looking build - comparable in build complexity and scale to a Bandai Master Grade kit. Why Build This Kit The SNAA 1/100 YR-05 Nether Emperor A.P. TYPE is the most posable kit in the Emperor Series and the most affordable at its price point, making it the recommended entry point for builders interested in SNAA's 1/100 line. Where the Fire Lord (YR-04) delivers maximum visual impact through sheer volume of flame-effect parts and a locked-in display pose, the Nether Emperor stays flexible and playable after assembly - a deliberate design tradeoff confirmed by Chinese-language reviews. At 22 cm tall with a full inner frame and 350+ parts, it offers a build experience comparable to a Bandai MG kit but with SNAA's original mechanical aesthetic and a weapon system that emphasizes function over spectacle. Builders should know that SNAA inner frames tend to have tighter joints than Bandai equivalents, so a hobby knife for gate cleanup and patience during skeleton assembly will improve the experience. For builders already familiar with SNAA's 1/144 Round Table Knights, the Nether Emperor is the natural scale-up - similar design philosophy, but with the added complexity and shelf presence of a 1/100 kit. Box Contents YR-05 Nether Emperor A.P. TYPE model kit runners (350+ parts) Thunder Pulse laser gun Instant Flash Broken Blade (extendable tip) Retractable bayonet with scabbard Weapon connector adapters Ghost Mask alternate faceplate Green accent color parts Orange accent color parts Yellow antenna parts Blue antenna parts Interchangeable hand set Water slide decals Instruction manual Specifications Brand SNAA Series Emperor Series (Royal Series) Model Number YR-05 Product Name Nether Emperor A.P. TYPE Scale 1/100 Height Approximately 22 cm (8.66") Materials ABS, POM, PVC Part Count 350+ Assembly Snap-fit, no cement required Backorder Notice:This item is currently on backorder and will be shipped once available. Please be aware that cancelling a backorder will incur a 25% restocking fee. For detailed information on our backorder and cancellation policies, please visit our FAQs page.

Official SNAA RetailerLA Scale Model is an authorized retailer of SNAA. All SNAA model kits are 100% genuine and sourced directly from the manufacturer. SNAA 1/144 BE The Round Table Knights – Achilles Model Kit The SNAA 1/144 Round Table Knights – Achilles is a high-mobility mecha designed for fast assault, precision defense, and adaptable combat performance. Featuring two distinct battle modes and a signature articulated shield system, Achilles delivers an impressive level of versatility within the Round Table Knights lineup. Key Features Dual Combat Modes: Achilles can shift between “Gale Type I” for rapid approach tactics and “Duel Type II” for close-range engagements. Lys Blades: Equipped with two Lys Blades optimized for swift melee strikes. Advanced Shield System: The “Rapid God Shield” mounts on articulated mechanical arms for directional defense. Inside the shield are a concealed Armor-Piercing Claw and the Annihilation Cannon for ranged attacks. Dynamic Articulation: The frame supports a wide range of expressive poses, enabling both defensive formations and high-speed combat stances. High-Detail Engineering: Sharp molding and clean part separation characteristic of SNAA’s 1/144 Round Table Knights series. Description As the speed-oriented member of the Round Table Knights, Achilles excels in both interception and precision assault. The articulated shield system allows for realistic directional blocking, mid-motion transformations, and long-range firing poses based on its built-in weaponry. The included mechanical arms, dual shields, and Lys Blades offer a flexible loadout suitable for various display styles. This model is designed to integrate seamlessly with other members of the Round Table Knights series, complementing units such as Lancelot, Percival, and Gawain through its agility-driven combat role. Box Contents Main body × 1 Replacement hands × 6 Lys Blades × 2 Rapid God Shields × 2 Articulated mechanical arms × 2 Water decal sheet × 1 Specifications Brand SNAA Series Round Table Knights Model Achilles Scale 1/144 Material Plastic Release Window 2024 Backorder Notice:This item is currently on backorder and will be shipped once available. Please be aware that cancelling a backorder will incur a 25% restocking fee. For detailed information on our backorder and cancellation policies, please visit our FAQs page.

Overview The SNAA 1/144 Giant Axe Lancelot is the captain unit of SNAA's BE Round Table Knights line, a small-scale third-party mecha kit themed on the Arthurian knight Lancelot. It converts between a Strong Attack Type and a Speed Attack Type using interchangeable head crests, and carries the most accessory-dense loadout in the series so far, anchored by an oversized champagne-gold pre-painted battle axe. SNAA's Round Table Knights is a 1/144 third-party line known for dense detail and an articulated inner frame that builders frequently compare to Bandai's Real Grade (RG) kits. Key Features Dual combat forms: swaps between Strong Attack Type and Speed Attack Type via two interchangeable head crests (bull-horn and standard antenna). Champagne-gold pre-painting: the first kit in the line to use metallic gold pre-painted parts in place of the bare yellow parts on earlier releases. Oversized battle axe plus twin folding blades: a large pre-painted axe for the Strong Attack form and two folding blades for the Speed Attack form. Clear cape backpack: two large UV-reactive clear cape parts on a backpack with four-stage articulated arms and a universal mount shared across the line. High-articulation inner frame: three-stage waist, 360-degree waist rotation, and pull-out shoulder and hip joints. Convertible thrusters: a pair of thrusters that open into defensive shields and mount to the backpack. Rich color separation: white and purple base with champagne-gold and blue clear accents. Builder Context This is an intermediate-level snap-fit kit that requires no cement but does demand care, as the inner frame is tight, several gates are thick, and the smaller pre-painted parts are easy to lose. In assembly feel and articulation it sits closest to Bandai RG-grade kits despite its lower part count. Why Build This Kit The SNAA 1/144 Giant Axe Lancelot is the captain unit of SNAA's Round Table Knights line and the most accessory-dense release in the series to date, shipping with an oversized champagne-gold pre-painted axe, two folding twin blades, a pair of convertible thrusters, and a clear cape backpack. It converts between a Strong Attack Type and a Speed Attack Type using interchangeable head crests, a feature none of the earlier Round Table Knights kits offered. Its inner frame delivers articulation that draws frequent comparison to Bandai's Real Grade line, including a three-stage waist, 360-degree waist rotation, and pull-out shoulder and hip joints. It is the first kit in the line to use metallic champagne-gold pre-painted parts instead of the bare yellow parts on earlier releases, so the finished build looks more complete straight off the runners. Builders should know the inner frame is tight and the chest-to-hip connection can break under side-to-side force if seated incorrectly, the armored arms have limited horizontal raise despite the strong frame, the gates on the dark blue and black parts are thick and need careful trimming, and the backpack blade-mount stud is loose enough to benefit from a drop of glue or a joint-reinforcing pen. Box Contents Giant Axe Lancelot main kit (articulated inner frame and outer armor) Two head options (bull-horn crest and standard antenna) Multiple interchangeable hand pairs Oversized champagne-gold pre-painted battle axe Two folding twin blades Two convertible thrusters (open into shield mode) Cape backpack with UV-reactive clear parts and four-stage articulated arms Two side external armor pieces Weapon and thruster mounting connectors Waterslide decal sheet Instruction manual Specifications Brand SNAA Series BE Round Table Knights Unit Giant Axe Lancelot (captain unit) Scale 1/144 Forms Strong Attack Type / Speed Attack Type Assembly Snap-fit, no cement required Inner frame Articulated plastic frame (newly tooled legs and waist) Finish Partial pre-painted metallic (champagne gold) Clear parts Blue, including UV-reactive cape Color scheme White, purple, champagne gold, blue clear Skill level Intermediate Backorder Notice:This item is currently on backorder and will be shipped once available. Please be aware that cancelling a backorder will incur a 25% restocking fee. For detailed information on our backorder and cancellation policies, please visit our FAQs page.

Official SNAA RetailerLA Scale Model is an authorized retailer of SNAA. All SNAA model kits are 100% genuine and sourced directly from the manufacturer. About the SNAA SC-009 Divine Invoker Percival Deluxe Edition The SNAA SC-009 Divine Invoker Percival Deluxe Edition is a 1/144 scale model kit from the Beyond Exquisite (BE) Round Table Knights series. Percival belongs to the Sanctuary tier - the highest of three ranks in the Round Table Knights lineup (Gale, Steel Knight, and Sanctuary) - and represents a knight-class mecha designed for both long-range suppression and close-range combat. SNAA is a Chinese original-IP manufacturer known for Western fantasy-themed mecha designs, and the Round Table Knights line is their most popular series among NA builders. The Deluxe Edition represents Percival in its Awakening Sword Formation mode, which adds a complete set of seven individually named relic weapons, four translucent particle cloak panels, a Sword Formation backpack, and a dedicated weapon display base. These Deluxe-exclusive accessories allow the kit to be displayed with all seven weapons floating in a circular formation around the unit - a dramatic shelf configuration that sets this edition apart from the Standard version. Key Features Deluxe "Awakening" Sword Formation Mode: Includes seven named relic swords and blades, four translucent particle cloak panels, and a Sword Formation backpack - exclusive to the Deluxe Edition. Full Inner Skeleton: Fully articulated internal frame with linked joints across head, torso, shoulders, hips, and knees for dynamic posing. Pre-Painted Outer Armor: Select armor panels come pre-painted over multi-color separated parts for a clean finish out of the box. Weapon Display Base: Dedicated display stand allows all seven weapons to be arranged in a floating Sword Array formation around the unit. Approximately 21 Runners: Includes main unit runners, cloak components, sword array base parts, and accessory runners. Waterslide Decals: Full waterslide decal sheet included for markings and fine details. Round Table Knights Compatibility: Frame design allows part-swapping with other kits in the Round Table Knights BE line. Builder Context The Percival Deluxe Edition is recommended for intermediate to advanced builders due to its dense part count and complex weapon configuration options. Construction is snap-fit with no cement required, comparable to an RG-grade Bandai kit in terms of part density and articulation complexity. Builders familiar with Bandai Real Grade kits or other SNAA Round Table Knights entries will find the assembly straightforward, though posing the full sword array requires careful weight distribution across the display base. Why Build This Kit The SNAA SC-009 Divine Invoker Percival Deluxe Edition is the most accessory-heavy entry in the 1/144 Round Table Knights lineup, with seven individually named relic weapons, translucent particle cloaks, and a dedicated weapon display base included in the box. At 17 cm tall, SNAA's 1/144 kits are comparable in size to Bandai 1/100 scale kits, giving Percival significantly more shelf presence than its scale designation suggests. The pre-painted armor panels and snap-fit construction mean the finished build looks display-ready without painting, making it accessible to builders comfortable with RG-grade Bandai kits who want an original design outside the Gundam universe. Builders new to SNAA should be aware that hand joints on Round Table Knights kits tend to be looser than Bandai equivalents - posing the larger swords requires balancing weapon weight across both hands and the display base rather than relying on grip strength alone. At its current price point, the Percival Deluxe Edition offers more accessories and display options per dollar than most Bandai HG or RG kits, which is a consistent pattern across the SNAA BE line. Box Contents SC-009 Divine Invoker Percival main unit runners (approximately 21 runners total) Summoning Scepters x2 Authority Backpack x1 Particle Cloak Panels x4 Sword Formation Backpack x1 Judgement (Greatsword) x1 Eagle Eye (Sword) x1 Windcleaver (Sword) x1 Rockbreaker (Sword) x1 Voidrend (Sword) x1 Shadowedge (Blade) x1 Flashstrike (Blade) x1 Weapon display base Waterslide decal sheet Instruction manual Specifications Brand SNAA Series Beyond Exquisite (BE) - Round Table Knights Model Number SC-009 Product Name Divine Invoker Percival - Awakening / Deluxe Edition Scale 1/144 Height Approx. 17 cm (to head) Materials ABS, Polystyrene Construction Snap-fit assembly, no cement required Decals Waterslide decals included Runner Count Approximately 21 Recommended Age 15+ SKU snaa-be-07 Backorder Notice:This item is currently on backorder and will be shipped once available. Please be aware that cancelling a backorder will incur a 25% restocking fee. For detailed information on our backorder and cancellation policies, please visit our FAQs page.

Official SNAA RetailerLA Scale Model is an authorized retailer of SNAA. All SNAA model kits are 100% genuine and sourced directly from the manufacturer. The Tristan – Titan Greatsword Type from the Round Table Knight Series is a 1/144 scale close-combat mecha model, serving as the commanding unit of the legendary knight squad. Within its ranks are Steel Sickle Kai and two additional knight units, forming an elite melee-focused team. Key Features: Scale and Line: 1/144 scale, part of the SNAA-exclusive Round Table Knight Series. Combat Role: Specializes in close-quarters combat with heavy melee weaponry and high defensive capabilities. Design Details: Features intricately molded golden Celtic battle engravings across its armor surface, evoking an ancient warrior aesthetic. Armaments: Comes equipped with a massive Titan Greatsword, the ceremonial Oathblade, and a Runic Shield which stores the Oathblade within. Release Information: Released as part of SNAA’s high-detail 1/144 model line, the Tristan unit represents a symbolic oathbound knight. Its appearance and accessories reflect a fusion of medieval mythology with futuristic mecha design. “When the wail of the Titan Greatsword resounds across the battlefield, the knight's oath is fulfilled.”The Tristan – Titan Greatsword Type is ideal for builders seeking elegant melee-themed mecha with rich symbolic flair and distinct lore. Backorder Notice:This item is currently on backorder and will be shipped once available. Please be aware that cancelling a backorder will incur a 25% restocking fee. For detailed information on our backorder and cancellation policies, please visit our FAQs page.

Official SNAA Retailer LA Scale Model is an authorized retailer of SNAA. All SNAA model kits are 100% genuine and sourced directly from the manufacturer. SNAA 1/144 BE The Round Table Knights – Thunder Incise Grace Model Kit The SNAA 1/144 BE The Round Table Knights – Thunder Incise Grace is a plastic model kit offering detailed articulation and a balanced weapons loadout for dynamic posing. As part of SNAA’s Beyond Exquisite lineup, this kit delivers a compact 1/144 scale build suitable for both newer builders and seasoned hobbyists who enjoy expressive model displays. Product Highlights 1/144 scale model kit from SNAA’s Round Table Knights series Fully articulated frame for dynamic display poses Includes a set of weapon accessories to equip Thunder Incise Grace for varied engagements Plastic construction with detailed molding Compatible with other Round Table Knights kits for expanded shelf displays Instructions may or may not include English text depending on batch Description Thunder Incise Grace is crafted to offer a solid and poseable build experience in mini-mecha format. Its articulation and proportion allow for expressive stances once complete, and the included weapons help recreate varied combat displays. The model’s design maintains visual coherence with the broader Round Table Knights thematic lineup, blending mechanical form with a stylized silhouette suitable for shelf or diorama presentations. This kit is recommended for hobby builders comfortable with standard model assembly processes including nub removal, fitting, and optional finishes like panel lining or decals. Box Contents Main Thunder Incise Grace unit parts Weapon accessory set Instruction manual Specifications Brand SNAA Series The Round Table Knights (Beyond Exquisite) Model Thunder Incise Grace Scale 1/144 Material Plastic (injection molded) Articulation Full articulation Instructions Included (language varies) Backorder Notice:This item is currently on backorder and will be shipped once available. Please be aware that cancelling a backorder will incur a 25% restocking fee. For detailed information on our backorder and cancellation policies, please visit our FAQs page.

Souling Toys 1/12 Daytime Meteor Mecha Musume White Dragon Model Kit The Souling Toys 1/12 Daytime Meteor Mecha Musume White Dragon Model Kit is a striking third-party figure model that blends mecha styling with “mecha-musume” character design. Featuring articulated build structure and a range of weapons and accessories, this kit delivers character personality with mechanical flair at a 1/12 scale suitable for display collectors and customizers alike. Product Highlights 1/12 scale mecha musume model kit with articulated build White Dragon character styling with mechanical accents Multiple external armor parts and weapons for pose variety Color-separated plastic runners for crisp assembly with minimal paint Designed for display and character interpretation poses Includes decals/stickers for detailed markings Description The White Dragon “Daytime Meteor” merges a stylized female mecha character with detailed mechanical design elements. This model kit embraces both aesthetic personality and functional structure through articulation points at major joints, allowing a wide range of expressive poses. Armor and weapon accessories enhance the theme and add visual interest for display. Ideal for collectors who enjoy original IP mecha musume kits, this build balances character appeal with mechanical complexity, making it a versatile addition to a shelf, diorama, or photography setup. Box Contents White Dragon main body parts Armor and mechanical detail runners Weapon accessories Interchangeable hands Display stand support Decal sheet Assembly manual Specifications Brand Souling Toys Model Daytime Meteor – White Dragon Scale 1/12 Kit Type Third-party mecha musume model kit Articulation Full poseable joints Includes Armor, weapons, decals, display stand Backorder Notice:This item is currently on backorder and will be shipped once available. Please be aware that cancelling a backorder will incur a 25% restocking fee. For detailed information on our backorder and cancellation policies, please visit our FAQs page.

Overview The Special Forces Industry 1/100 Sentinel is a third-party mecha model kit built around a complete prebuilt alloy inner frame. Released in 2024 by Special Forces Industry (特战工业), the same manufacturer behind the Fire Shadow series, the Sentinel represents a sniper-type mecha design with an emphasis on mechanical weight, joint quality, and modular weapon configurations. Special Forces Industry is a Chinese third-party brand known for alloy-integrated mecha kits that prioritize internal frame engineering over external detail density. Key Features Complete Prebuilt Alloy Inner Frame - The entire internal frame is a finished alloy assembly with pre-tuned joint damping, not partial alloy inserts or individual joint upgrades. The 120-part alloy frame ships fully assembled and ready for outer armor attachment. Dual Configuration Build - The kit includes parts for two distinct loadout types, Sniper Type and Heavy Bombardment Type, with two interchangeable head sculpts and double sets of all primary weapons and equipment. One purchase supports two complete display configurations. 702 Total Parts - 120 parts within the prebuilt alloy frame and 582 buildable outer armor and accessory parts in ABS and POM. Pre-Painted Armor Sections - Navy blue, red, antenna, and green visor components are factory pre-sprayed for a near-finished appearance without painting. Modular 24.5 cm Sniper Rifle - The primary weapon can be reconfigured into a compact machine gun by removing the barrel, stock, and optics. Fully Articulated Five-Finger Hands - Individual finger joints require assembly but provide firm weapon grip and natural posing. Multi-Mechanism Articulation - Retractable face mask, extending elbows, three-segment waist bend, linked knee joints, and multi-angle adjustable thrusters. Builder Context The Sentinel is a moderate-difficulty snap-fit kit suited for intermediate to advanced builders. The outer armor is press-fit assembly with no cement required, though builders have noted that some peg tolerances run tighter or looser than typical Bandai kits. The prebuilt alloy frame eliminates the most complex part of the build, so the actual assembly process focuses on attaching outer armor panels and weapons. Builders familiar with MG-grade Bandai kits will find the build format comparable, with the added weight and joint stability of the alloy inner frame. Why Build This Kit The Special Forces Industry 1/100 Sentinel is one of a small number of third-party 1/100 mecha kits that ship with a complete prebuilt alloy inner frame rather than partial alloy joints or plastic-only construction. At 20.7 cm and approximately 702 parts, the finished build has a noticeably heavier, more substantial feel than standard plastic kits at the same scale, including Bandai MG kits. The dual-configuration design, which includes enough parts to build either a Sniper Type or Heavy Bombardment Type loadout with two interchangeable heads, offers display flexibility that most single-configuration kits at this price point do not match. Builders who want alloy frame construction at the 1/100 scale without the price of a high-end diecast figure will find the Sentinel competitive, though peg tolerances across the outer armor can be inconsistent and may require minor fitting adjustments during assembly. The Sentinel is a reasonable entry point into Special Forces Industry kits and third-party alloy-frame mecha in general, particularly for builders who prioritize joint stability and posing weight over surface detail refinement. Box Contents 1x Prebuilt alloy inner frame (120 parts, fully assembled) Outer armor runner sets (582 parts) 2x Interchangeable head sculpts 2x Sniper rifle kit (24.5 cm assembled, modular breakdown to machine gun) 2x Short firearms (side armor stored pistols) 2x Beam sabers 2x UV-reactive pre-painted beam saber effect parts 2x Cannons 2x Shields with articulated mechanical arm mount 2x Robotic sub-arms 2x Leg large thrusters 2x Missile launcher pods 2x Sniper replacement antenna pairs 2x Adaptors/connectors 1x Storage base with compartments 1x Alloy universal support arm stand Assembly instructions Brand Special Forces Industry (特战工业) Product Name Sentinel Model Number TZGY-01 Scale 1/100 Height Approximately 20.7 cm Materials Alloy, POM, ABS Total Parts 702 (120 alloy frame + 582 buildable) Pre-Painted Areas Navy blue, red, antenna, green visor Assembly Type Snap-fit (outer armor); alloy inner frame ships prebuilt Configurations Sniper Type / Heavy Bombardment Type (dual build option) Display Base Included - storage base with alloy universal support arm Backorder Notice:This item is currently on backorder and will be shipped once available. Please be aware that cancelling a backorder will incur a 25% restocking fee. For detailed information on our backorder and cancellation policies, please visit our FAQs page.

Super Evolution 1/100 Eternal-Star Darkness Model Kit The Super Evolution 1/100 Eternal-Star Darkness is a 1/100 scale plastic assembly model kit from the Armament Tactical Series by Super Evolution (Chao Mo Li). This kit is a dark recolor of the Eternal Star Glory, reimagining the Stargazer-inspired mecha in an all-black armor scheme with interchangeable gold and clear red accent parts. The kit includes a backpack halo ring set, effect parts, a display stand, and newly designed water slide decals. Key Features Dark Color Scheme: All-black armor with interchangeable gold and clear red decorative accent parts for the body trimmings, antenna, and inner frame details. Backpack Halo Ring: Large celestial-style backpack ring set with dark-themed effect parts. Full Articulation: Fully poseable joints across the body for dynamic and expressive display poses. Dual Antenna Options: Two types of antenna included, corresponding to the gold and red accent choices. Water Slide Decals: Newly designed water slide decals specific to the Darkness color variant. Display Stand Included: Comes with a dedicated display stand to support the weight of the backpack ring and effect parts. Box Contents Eternal-Star Darkness main body runners Backpack ring set Gold accent parts Clear red accent parts Effect parts Display stand Water slide decals Instruction manual Specifications Brand Super Evolution (Chao Mo Li) Series Armament Tactical Series Model Number ST-00 Scale 1/100 Height Approx. 19–22 cm (depending on configuration) Material ABS, PVC Package Dimensions Approx. 40 × 33 × 10 cm Package Weight Approx. 1 kg Product Type Plastic assembly model kit IP Third-party original design (Stargazer-inspired) Backorder Notice:This item is currently on backorder and will be shipped once available. Please be aware that cancelling a backorder will incur a 25% restocking fee. For detailed information on our backorder and cancellation policies, please visit our FAQs page.