Products

The VF-0S Phoenix is a variable fighter that appears in the Macross Zero OVA. The Northrop Grumman/Bellcom VF-0 Phoenix variable fighter was an advanced prototype for the VF-1 Valkyrie which served as a flight test unit and later in 2008 as a front-line fighter, before the Valkyrie's mass production in November 2008. The fighter was developed with OverTechnology obtained from the massive alien space ship that crashed on Earth in the year 1999.In most respects, the VF-0 resembled the VF-1 Valkyrie, although its legs were longer because the EGF-127 conventional turbofan engines used by the fighter were larger and bulkier than the VF-1's FF-2001 thermonuclear engines/ Numerous fine details also differ, such as head designs. The VF-0D's wings are very different, replacing the variable sweep wings with a canard-delta configuration; although this would perform well, it would ultimately not be adopted for the production series VF-1.

The VF-0S Phoenix is a variable fighter that appears in the Macross Zero OVA. The Northrop Grumman/Bellcom VF-0 Phoenix variable fighter was an advanced prototype for the VF-1 Valkyrie which served as a flight test unit and later in 2008 as a front-line fighter, before the Valkyrie's mass production in November 2008. The fighter was developed with OverTechnology obtained from the massive alien space ship that crashed on Earth in the year 1999.In most respects, the VF-0 resembled the VF-1 Valkyrie, although its legs were longer because the EGF-127 conventional turbofan engines used by the fighter were larger and bulkier than the VF-1's FF-2001 thermonuclear engines/ Numerous fine details also differ, such as head designs. The VF-0D's wings are very different, replacing the variable sweep wings with a canard-delta configuration; although this would perform well, it would ultimately not be adopted for the production series VF-1.

The YF-21 is an experimental variable fighter featured in the Macross Plus OVA and its theatrical adaptation, Macross Plus Movie Edition. It was part of U.N. Spacy's Advanced Variable Fighter initiative under Project Super Nova. The prototype was piloted by Guld Goa Bowman.It ultimately lost to the YF-19, although a handful of its final version were still produced under special circumstances. The YF-21 served as a prototype for the VF-22 Sturmvogel II, which later appeared in Macross 7, often used by ace pilots.

The HG 1/144 #28 Wodom Pod from Gundam Build Divers Re:RISE is a 1/144 scale model kit that faithfully recreates the unique mobile suit piloted by May. Known for its distinctive design and versatility, the Wodom Pod is a standout addition to the series. Key Features: Scale and Materials: 1/144 scale model kit made with high-quality polystyrene for durability and precise detailing. Transformation Capability: Features the ability to transform into a high-velocity flight form, replicating its appearance in the series. Reinforced Parts: Includes second-season reinforcement parts for enhanced customization and improved aesthetics. Accessories: Comes with a display stand, allowing for dynamic poses and engaging displays. Release Information: Released in 2020 as part of the High Grade Build Divers Re:RISE (HGBD:R) series, this kit continues Bandai's tradition of delivering versatile and high-quality Gunpla for fans and collectors. The HG 1/144 #28 Wodom Pod is perfect for Gunpla enthusiasts and collectors, offering a distinctive design, excellent functionality, and dynamic customization possibilities.

The HG 1/144 00 Raiser (Designer’s Color Ver.) is a High Grade model kit from the Mobile Suit Gundam 00 series. This special Designer’s Color version replicates Kanetake Ebikawa’s color scheme, offering enhanced aesthetics and detail. It delivers an engaging build experience while capturing the iconic look of the 00 Raiser in both separate and combined forms. Key Features: Scale and Materials: 1/144 scale model kit crafted from high-quality PS and PE plastic, ensuring durability and precision. Articulation: Includes multiple points of articulation, allowing for dynamic posing that showcases the 00 Raiser’s versatility. Weaponry and Accessories: Comes with: GN Sword II (x2) with beam effects GN Shields (x2) with adapters GN Beam Sabers (x2) 0 Raiser BA-3 Display Stand Design Details: Features clear parts for GN Condensers and a detachable 0 Raiser that docks with the 00 Gundam to form the 00 Raiser. Release Information: Released on February 13, 2009, this model kit was priced at ¥1,800 upon release. It is part of the High Grade lineup and is celebrated for its detailed representation of the 00 Raiser in a unique designer's color scheme. The HG 1/144 00 Raiser (Designer’s Color Ver.) is an excellent addition for fans of Mobile Suit Gundam 00 and model enthusiasts seeking a standout kit with striking color and articulation.

The HG 1/144 Black Knight Squad Cal-re.A is a high-grade model kit representing the formidable mobile suit piloted by Orphee Lam Tao and Ingrid Tradoll in the film Mobile Suit Gundam SEED Freedom. This kit captures the unique design and features of the Cal-re.A, offering builders an engaging assembly experience and dynamic display possibilities. Key Features: Scale and Materials: 1/144 scale model kit crafted from high-quality polystyrene and ABS plastic, ensuring durability and precise detailing. Articulation: Equipped with the "SEED Action System," an internal structure specialized for reproducing impressive action poses as seen in the anime. Accessories: Includes a beam rifle, two anti-ship swords, a PET sheet for Wings of Light effect, backpack deployment parts, and beam parts for DRAGOON units, allowing for versatile display options. Design Details: Faithfully replicates the Cal-re.A's distinctive features, including its unique head and armor configurations, as well as the deployable backpack and DRAGOON units. Release Information: Released in October 2024 as part of Bandai's High Grade Cosmic Era (HGCE) line, this kit brings the Black Knight Squad's Cal-re.A to life with exceptional detail and articulation, making it a must-have for fans of the Gundam SEED series. The HG 1/144 Black Knight Squad Cal-re.A is an excellent addition to any Gunpla collection, offering a rewarding building experience and a striking display piece that embodies the essence of the Mobile Suit Gundam SEED Freedom universe.

The GNT-0000SDV Gundam 00 Command Qan[T] (ガンダムダブルオーコマンドクアンタ Gandamu Daburuō Komando Kuanta?) is a Gunpla that appears in the Gundam Breaker Battlogue ONA. It first debuted in the tie-in mobile game Gundam Breaker Mobile. A custom Gunpla with SD Command Gundam elements added to the 00 Qan[T]​. In addition to improving the defense power with additional armor, it is possible to fight in any situation with a number of new weapons for both close and far. The 00 Command Qan[T] is also equipped with a sub-energy tank for prolonged battles and its combat style is reminiscent of an elite soldier who detaches used-up weaponry to increase mobility and strives to complete a mission even if it only has its Combat Knives left.

The HG 1/144 Core Gundam II (G-3 Color) from Gundam Build Divers Re:RISE is a high-grade model kit that brings the versatile Core Gundam II in a distinctive G-3 color scheme. This model offers exceptional customization options, allowing builders to create unique Gundam configurations by combining it with various armor and weapon sets. Key Features: Scale and Materials: 1/144 scale model kit crafted from high-quality polystyrene and ABS plastic, ensuring durability and precise detailing. Articulation: Features the Core Docking Mechanism, enabling transformation into a Core Flyer and compatibility with multiple armor units for dynamic posing and display options. Accessories: Includes a shield and rifle, providing essential equipment for versatile combat scenarios. Design Details: Showcases the unique G-3 color scheme, offering a fresh take on the Core Gundam II's appearance. Release Information: Released in December 2020 as part of Bandai's High Grade Build Divers Re:RISE (HGBD:R) line, this kit enhances the Core Gundam series with its distinctive color variant and expanded customization potential. The HG 1/144 Core Gundam II (G-3 Color) is an excellent addition for Gunpla enthusiasts seeking to diversify their collection with customizable and uniquely colored models, providing a rewarding building experience and a dynamic display piece.

The HG 1/144 Dragonar-1 Plus Lifter-1 is a High Grade model kit from the classic anime series "Metal Armor Dragonar." This kit features: Articulated joints for dynamic posing capabilities. Weapons including: Hand Railgun Super Hybrid Shield Laser Swords Throwing Bombs Shoulder Bombs Four-shot Missile Pods Additional equipment: LIFTER-1 for enhanced mobility and combat versatility. Snap-fit assembly with color-coded plastic parts, minimizing the need for painting. Once assembled, the model stands approximately 12.5 cm tall, making it a notable addition to any mecha collection.

The GAT-X102 Duel Gundam is a mobile suit introduced in the anime Mobile Suit Gundam SEED. It was piloted by Yzak Joule. The Duel Gundam is the first unit to be developed in the Earth Alliance's G Project series of prototype MS. Equipped with the new Phase Shift armor that makes it nearly impervious to most physical weapons, the Duel is designed as a general-purpose machine that has well-balanced performance, and also serves as a development base for the other MS in the project.The Duel's armament consists of two head-mounted "Igelstellung" 75mm multi-barrel CIWS guns, which later become standard weaponry on most Earth Alliance's suits to intercept incoming missiles and closing in enemy units, two beam sabers stored on the backpack and hand-carried for use in close combat, a 57mm High-energy Beam Rifle with an attached 175mm grenade launcher for ranged combat, and an anti-beam coated shield for defense. Duel also has a Rail Bazooka as an optional weapon, but it was taken and used by MBF-P01 Gundam Astray Gold Frame to escape from Heliopolis.After being stolen by ZAFT and damaged in battle with the GAT-X105+AQM/E-X01 Aile Strike Gundam, the suit is upgraded with the Assault Shroud. The Assault Shroud is a set of ejectable armor mounted on the Duel’s body to enhance overall combat performance. It adds a "Shiva" 115mm railgun to the right shoulder and a 220mm 5-barrel missile pod to the left shoulder for additional firepower, as well as various leg and backpack-mounted thrusters for better mobility. Although the equipment worked well in space, it performs poorly under gravity due to its bulk.

The GAT-X102 Duel Gundam is a mobile suit introduced in the anime Mobile Suit Gundam SEED. It was piloted by Yzak Joule. The Duel Gundam is the first unit to be developed in the Earth Alliance's G Project series of prototype MS. Equipped with the new Phase Shift armor that makes it nearly impervious to most physical weapons, the Duel is designed as a general-purpose machine that has well-balanced performance, and also serves as a development base for the other MS in the project.The Duel's armament consists of two head-mounted "Igelstellung" 75mm multi-barrel CIWS guns, which later become standard weaponry on most Earth Alliance's suits to intercept incoming missiles and closing in enemy units, two beam sabers stored on the backpack and hand-carried for use in close combat, a 57mm High-energy Beam Rifle with an attached 175mm grenade launcher for ranged combat, and an anti-beam coated shield for defense. Duel also has a Rail Bazooka as an optional weapon, but it was taken and used by MBF-P01 Gundam Astray Gold Frame to escape from Heliopolis.After being stolen by ZAFT and damaged in battle with the GAT-X105+AQM/E-X01 Aile Strike Gundam, the suit is upgraded with the Assault Shroud. The Assault Shroud is a set of ejectable armor mounted on the Duel’s body to enhance overall combat performance. It adds a "Shiva" 115mm railgun to the right shoulder and a 220mm 5-barrel missile pod to the left shoulder for additional firepower, as well as various leg and backpack-mounted thrusters for better mobility. Although the equipment worked well in space, it performs poorly under gravity due to its bulk.

The GAT-X105+AQM/E-YM1 Perfect Strike Gundam is a mobile suit introduced in the HD Remaster version of the anime Mobile Suit Gundam SEED. It is the heavy armed variant of the GAT-X105 Strike Gundam and is piloted by Mu La Flaga. The Perfect Strike Gundam is a configuration of the Strike Gundam equipped with the "AQM/E-YM1 Multiple Assault Striker", which integrates the characteristics of the Aile, Sword and Launcher Striker Packs. A modified Aile Striker Pack served as the central unit of the Multiple Assault Striker, its main wings are moved back slightly for mounting the "Schwert Gewehr" Anti-Ship Sword and "Agni" Hyper Impulse Cannon, and four battery packs are attached to the back to deal with the increased energy consumption.Although the Multiple Assault Striker enabled the Perfect Strike to fight in all ranges with powerful weapons, it has two major problems. Firstly, the added weight of the Multiple Assault Striker lead to a decrease in mobility, and secondly, the large variety of weapons make it difficult to operate them efficiently. Due to these issues, the Perfect Strike was only deployed in combat once, but it was able to exhibit high operability due to the skills of its pilot, Mu La Flaga.

The GAT-X207 Blitz Gundam is a prototype stealth Mobile Suit introduced in the anime Mobile Suit Gundam SEED. It is piloted by Nicol Amalfi. The GAT-X207 Blitz Gundam is developed for the purpose of conducting surprise attacks deep behind enemy lines. It is the only unit among the five prototypes created under the Alliance's G Project to use the X200 series frame that is designed to support special systems. In this case, the Mirage Colloid Stealth System that renders Blitz invisible to both sensors and the naked eye. The suit is painted mainly black to enhance the effectiveness of the stealth system and is fitted with other systems to ensure the silent operation of internal mechanisms and systems, as well as to control the heat dissipation while cloaked. Like the other four units, Blitz is also equipped with Phase Shift armor system, but unlike them, it does not have any built-in weaponry like the CIWS. Its armament are all arm-mounted and consists of a grappling claw and an offensive shield system, which mounts both melee and range, beam as well as non-beam weapons.

The GAT-X252 Forbidden Gundam is a Mobile Suit introduced in the anime Mobile Suit Gundam SEED. It is piloted by "Biological CPU" Shani Andras. A second generation GAT-X machine, the Forbidden is designed for infiltrating and raiding enemy bases and to fulfil this role, it can transform into a "High-Speed Assault Form" by flipping its huge backpack unit over its head. Like the other two second generation units, the Forbidden is equipped with Trans-Phase armor (TP armor). Its armaments consists of head-mounted CIWS, forearm-mounted machine guns, a handheld scythe and backpack-mounted railguns and plasma cannon, both of which are usable only in "High-Speed Assault Form".As indicated by its model code, the Forbidden utilizes a X200-series frame like the GAT-X207 Blitz Gundam, and as such it is also equipped with special equipment. One special equipment is the "Geschmeidig Panzer" energy deflection armor installed in its two massive shields. This equipment can deflect any range beam attacks that hits it, making the Forbidden virtually invulnerable to these attacks. Coupled with the fact that the shields themselves also have TP armor, the Forbidden is thus well protected from most beam and physical attacks. In addition, the "Geschmeidig Panzer" also allows the Forbidden to move underwater with ease, even though it is not specifically designed for aquatic use.Another special equipment is the magnetic field generators installed on the railguns, they allow the bending of the plasma cannon's beam, making the attack harder to evade. Due to the powerful thrusters in the backpack, which is actually a specialized flight unit, the Forbidden can fly in the atmosphere and is one of the rare mobile suits to be capable of both aerial and aquatic combat without any additional equipment.

The GAT-X370 Raider Gundam is a transformable Mobile Suit introduced in the anime Mobile Suit Gundam SEED. It is piloted by "Biological CPU" Clotho Buer. The Raider is a transformable mobile suit and the only second generation GAT-X machine to adopt the X300-series frame used by the GAT-X303 Aegis Gundam. Compared to the Aegis, Raider has improved anti-mobile suit capabilities when in MA mode and its transformation system is greatly simplified. It is actually a variant of the GAT-333 Raider Full Spec and maintains some of its predecessor's characteristics, like a MA mode specialized for flight and the two large fighter plane-like main wings that give it full atmospheric flight capabilities. These wings also boost Raider's turning capabilities and acceleration speed on earth and in space, as well as allow it to serve as a subflight lifter unit for carrying other mobile suits (usually the GAT-X131 Calamity Gundam). During battles, Raider often utilizes hit-and-run attacks and has Trans-Phase armor like the other second generation machines. The Raider is armed with both energy and shell-firing weapons (with some of them being usable only in flight mode) and uses the "Mjolnir" Spherical Breaker, a wire tethered mace, as its handheld weapon.

The GN-001 Gundam Exia (aka Exia, Gundam Seven Swords) is a mobile suit featured in season one of Mobile Suit Gundam 00 and is piloted by Setsuna F. Seiei.Specializing in close combat and armed mainly with melee weapons, the Gundam Exia is one of four Gundams deployed in AD 2307 by the paramilitary organization, Celestial Being, to eliminate world conflicts through armed interventions. To fight against the world with their small numbers and win, these Gundams have overwhelming power and equipped with advanced technology a century ahead of its time. Notably, the semi-perpetual GN Drive mounted in the center of the Gundams provide almost limitless energy and generates special, multifunctional GN Particles. The GN Particles grant outstanding mobility, including independent flight capabilities, and are also utilized for beam weaponry, attitude control, and stealth purposes as the discharged particles can cause electromagnetic interference, leaving conventional communication and radar devices useless. The Gundams also share common aspects with conventional mobile suits, such as the use of E-Carbon for its armor material. However, the Gundams' E-Carbon has higher defensive power due to the use of advanced materials.An example of Exia's overwhelming power is that its output was estimated to be about six times that of the SVMS-01 Union Flag, one of the newest conventional mobile suits at the time. The technical hurdles that had to be overcome to create the powerful Gundams and their GN Drives were high, making their production extremely difficult and caused the Gundams' development to occur in phases. The first generation machine, the GN-000 0 Gundam, established the basic system of a mobile suit powered by a GN Drive, and armed with a beam gun and beam saber. Subsequently, four second generation machines were developed with individual capabilities required for armed intervention, and their data served as a basis for the third generation machines, which included Exia and the other three Gundams deployed in the armed interventions. Specifically, Exia was developed from the GNY-001 Gundam Astraea, a general-purpose mobile suit with human-like movability that was used for testing various weapons, and the two machines have a number of similarities in terms of appearance.The Astraea's movability aspect is particularly appropriate for the Exia, which requires the same range of articulations as the human body due to its close combat specialization. Thus, while the Exia is armed mainly with melee weapons, its basic performance remains that of a general-purpose mobile suit. In fact, Exia is the only Gundam deployed for the armed intervention that has a body structure capable of range of articulations like the human body's, and the omission of such a structure in the other three Gundams is simply because they do not require it as their specialization is in other areas. To achieve its wide range of articulations, Exia has the most complex basic frame out of the four Gundams, its armor is also more minutely segmentalized as well. This armor design however causes some internal structures and the joints to be unprotected during certain poses, lowering Exia's defensive capability. On the other hand, this design does provides better mobility, giving Exia the best projectile evasion capability among the four Gundams.The Exia also has finer attitude control capabilities than the other Gundams, which is beneficial for close combat, and this is related to its GN Cables. The GN Cables, also known as “GN Power Lines”, are the light purple-colored cables running through various parts of the Exia's body and also one of its eye-catching visual features. While these cables are also found on other Gundams, the ones extending from the shoulders to the upper arms are unique to Exia. The cables facilitate the supply of tremendous amount of GN Particles, and thus energy, to each part of the Gundam instantaneously. They are also used for attitude control due to the GN Particles' mass reduction effect, and so, the Exia which has more cables on its exterior than the other Gundams is able to achieve finer control. In terms of defense however, such placements are dangerous, and later in GN-001REII Gundam Exia Repair II, the cables become mostly stowed in the armor.The GN Particles' mass reduction effect also lightens the Gundam, and can be used to alter the mass ratio of various body parts. Due to this latter ability, it is possible to freely control the machine's inertia and turning capabilities when in the air, and for Active Mass Balance Auto-Control (AMBAC) when in space. This also eliminates the need for the legs to "walk” when moving. As for the control of GN Particles, it is largely carried out by the two clavicle antennas on the Gundam's torso. A minor role is played by the third generation Gundams' head antenna, which is experimentally equipped with particle control functions. The head antenna also has communications and radar search functions, as well as the black box for quantum communication linkage with Veda (the Celestial Being's quantum computing system). The rest of the Gundams' humanoid head unit also contain systems responsible for controlling the entire body, much like a human's head. On a side note, the Exia's head is designed to look like the helmet of the pilot suit worn by the Gundam Meisters in AD 2307-2308 to express the belief of “Meister = Gundam”.While the GN Drive can produce GN Particles endlessly, even when the Gundams are inactive, there is a limit to the amount that could be instantaneously produced. Thus, continuous or heavy usage of beam weapons and other GN Particles consuming systems might cause the Gundams to run out of particles. To avoid this, the Gundams have GN Condensers in various body parts to store excess GN Particles. For maintenance purposes, the condensers can display the particles' compression rate and the amount stored. During mission, this display function is used for transmitting coded messages to allied units. On the matter of GN Drives, Celestial Being only created five units as that was deemed to be the minimum needed for armed interventions. The low number is not only due to difficulties in manufacturing the GN Drive, which requires Jupiter's high gravity environment, but also because having more GN Drives would increase the risk of them falling into the enemy's hands.The Gundam Exia is nicknamed “Gundam Seven Swords” as its development code was “Seven Swords”, and as indicated by this name, it is equipped with a total of seven blades to meet the needs of the moment during combat. Of these seven, the GN Sword, GN Long Blade, GN Short Blade are physical blades, while the rest are beam-based and consisted of two GN Beam Sabers and two GN Beam Daggers. The GN Sword serves as the primary weapon and due to its low energy consumption, the Exia has an advantage in prolonged combat, which mainly occurs when fighting ace pilots or when subjected to traps such as the three major bloc's joint military exercise. The three physical blades also serve as countermeasures against GN Field, a protective barrier made of GN Particles. In other words, Exia is also intended to fight against Gundam/GN Drive-equipped machine that is piloted by a betrayer or captured by the enemy and used against Celestial Being. Early on, an alternate configuration of the GN-005 Gundam Virtue also had an anti-betrayer role, but its design was dropped and this increased the responsibilities placed on Exia and its Gundam Meister.Other armaments include a GN Shield for defense that also provides protection to the internal structures and joints that might be exposed during movements. The GN Shield is usually in a compact size to maintain Exia's range of articulations, but can expand to increase the defensive area when needed. Similarly, the GN Sword, can fold its blade and has a Rifle Mode for ranged combat. The last of Exia's armament is another ranged weapon in the form of a pair of low-power GN Vulcans mounted in the forearms. During battles, the Exia gloriously sliced through its opponents in close combat, leaving a powerful impression on those who witnessed it and contributing greatly to the instillment of a "fear of Gundams" in the world. This was already anticipated by Celestial Being, and it is because of this that the organization's tactical forecaster, Sumeragi Lee Noriega, selected the Exia to intervene in the AEU-09 AEU Enact's presentation ceremony, which became the unveiling of the paramilitary organization.The Gundam Exia has an "Over Boost Mode" that temporarily boosts its GN Drive's performance and thus increase the mobile suit's capabilities. During an emergency, the Exia can activate a special "Trans-Am System" that enhances its thrust and defensive capabilities, as well as increase its output to three times that of its normal specifications for a limited period of time. This system also causes the Gundam to glow red, but it is a double-edged sword as Exia's performance will drop dramatically once it ends. A number of additional optional equipment was also developed for Exia, such as the high mobility Avalanche Unit and the GNR-001E GN Arms Type-E support machine. When equipped with the Avalanche Unit, the Exia becomes the GN-001/hs-A01 Gundam Avalanche Exia and can speed past specialized high-speed mobile suits, which it normally cannot do despite having remarkable mobility. When docked with the GN Arms Type-E, the Exia becomes the GN-001+GNR-001E GN Armor Type-E, obtaining better mobility, offensive and defensive capabilities.

The GN-001REII Gundam Exia Repair II (aka Gundam Exia Repair II, Exia Repair II, Exia R2) is the repaired and upgraded version of the GN-001RE Gundam Exia Repair. Appearing in Mobile Suit Gundam 00 season 2, it is piloted by Setsuna F. Seiei. For the final battle against the Innovators, the reborn Celestial Being deployed all usable mobile suits they have, including the Exia Repair II (aka Exia R2) that served as a spare machine for Setsuna F. Seiei. Built from the wreckage of the Exia Repair by a team of mechanics led by Ian Vashti, the Exia R2 incorporated the latest technology and is more powerful than its predecessors.The light purple-colored GN Cables on the exterior of the original Exia and Exia Repair are now mostly stowed in the Exia R2's armor. These cables facilitate the supply of GN Particles, and thus energy, to each part of the Gundam instantaneously, and are also used for attitude control due to the particles' mass reduction effect. The internalization of these cables resolves the defensive concerns regarding their previously exposed placements, improving the Exia R2's defensive capability. The Exia R2 also has enhanced mobility as additional thrusters are installed on various parts of its body.Due to the proliferation of GN Drive Taus, it is now much more difficult to overwhelm enemy machines compared to before. To counter this, the Exia R2 has been reworked into a "one-hit-kill" machine. It is armed with a GN Sword Kai, two GN Beam Sabers a pair of GN Vulcans, and a GN Shield. Overall attack power is enhanced thanks to the GN Sword Kai, a powered up version of the original Exia's GN Sword. However, this focus on singular attack power resulted in decreased comprehensive battle strength as the total number of swords is reduced from the original Exia's seven to the current three.Like the original Exia, the Exia R2 has an "Over Boost Mode" that temporarily boosts its capabilities. The Exia R2's primary tactic is to combine a single GN Sword Kai attack with the "Over Boost Mode" to defeat the enemy quickly, and this was successfully employed against the GN-000 0 Gundam. A damaged Exia R2 was recovered after the battle, but its GN Drive was damaged beyond repair by 0 Gundam's attack. It was then repaired into the GN-001REIII Gundam Exia Repair III, powered by a particle storage tank.

The GNT-0000SDV Gundam 00 Command Qan[T] (ガンダムダブルオーコマンドクアンタ Gandamu Daburuō Komando Kuanta?) is a Gunpla that appears in the Gundam Breaker Battlogue ONA. It first debuted in Gundam Breaker Mobile. A custom Gunpla with SD Command Gundam elements was added to the 00 Qan[T]. In addition to improving the defense power with additional armor, it is possible to fight in any situation with a number of new weapons both close and far. The 00 Command Qan[T] is also equipped with a sub-energy tank for prolonged battles and its combat style is reminiscent of an elite soldier who detaches used-up weaponry to increase mobility and strives to complete a mission even if it only has its Combat Knives left.

The HG 1/144 Gundam Barbatos 6th Form from Mobile Suit Gundam: Iron-Blooded Orphans represents the sixth evolution of the formidable Gundam Barbatos, piloted by Mikazuki Augus of Tekkadan. This high-grade model kit faithfully captures the mobile suit's distinctive design and armaments, offering builders an engaging assembly experience. Key Features: Scale and Materials: 1/144 scale model kit crafted from high-quality polystyrene and polyethylene, ensuring durability and precise detailing. Articulation: Features a highly articulated inner frame, allowing for dynamic poses and reenactments of iconic scenes from the series. Weaponry and Accessories: Equipped with the signature Wrench Mace, which can open to reveal a chainsaw, and includes parts to recreate both the 5th and 6th forms of Barbatos, offering versatile display options. Design Details: Accurately reproduces the Gundam Barbatos 6th Form's unique armor and weapon configurations, reflecting its continuous evolution throughout the series. Release Information: Released in February 2016 as part of Bandai's High Grade Iron-Blooded Orphans (HG IBO) line, this kit allows fans to build and display one of the most iconic mobile suits from the series. The HG 1/144 Gundam Barbatos 6th Form is an essential addition for Gundam enthusiasts and model builders, offering a rewarding build and a striking representation of the evolving Gundam Barbatos.

Elevate your model kit collection with the HG 1/144 Gundam GQuuuuuuX, the iconic mobile suit from the upcoming anime series Mobile Suit Gundam GQuuuuuuX. This High Grade (HG) kit from Bandai Spirits combines stunning detail with ease of assembly, making it a must-have for both seasoned modelers and newcomers to the hobby. Key Features: Authentic Design: Experience the cutting-edge collaboration between Sunrise and Khara, with mechanical designs by Ikuto Yamashita (Evangelion series). The model faithfully replicates the unique and futuristic aesthetics of the GQuuuuuuX as seen in the anime. Dynamic Articulation: The advanced articulation system in the torso and hips enables dynamic posing, perfect for recreating dramatic action scenes. Customizable Accessories: Packed with a versatile arsenal, this kit includes: Axe Shield Beam sabers Rifle Optional head parts Additional hand parts Flexible Backpack: The model's movable backpack adds versatility for enhanced display options. Specifications: Scale: 1/144 Series: High Grade (HG) Release Date: January 17, 2025 (Japan) Suitable for: Modelers of all skill levels