Featured

Endless Create SR-01 Shurado Series Byaki MGSD-Style Model Kit The Endless Create SR-01 Shurado Series Byaki is a compact, highly detailed mecha model kit designed in an MGSD-style format. Produced by Endless Create, this kit features super-deformed proportions combined with dense mechanical detailing, layered armor construction, and a display-focused silhouette. Based on preview materials and retailer listings, Byaki emphasizes sharp panel separation, angular armor geometry, and a stylized heroic profile. The design prioritizes visual impact while maintaining a manageable build size compared to full 1/100 releases. Key Features MGSD-Style Design: Super-deformed proportions combined with high mechanical detail density. Original Mecha Design: Not affiliated with Bandai or any Gundam intellectual property. Layered Armor Construction: Multi-panel armor layout with stepped surface depth. High Surface Detail: Panel lines and mechanical features molded directly into parts. Display-Oriented Proportions: Designed for shelf presence and posed presentation. Visible Equipment Byaki main body components Integrated armor-mounted mechanical details Stylized weapon and accessory components as shown in preview materials Specifications Brand Endless Create Series Shurado Series Model SR-01 Byaki Scale / Format MGSD-style (non-scale) Product Type Plastic assembly model kit IP Affiliation Original design (Third Party)

Official Motor Nuclear Retailer LA Scale Model is an authorized retailer of Motor Nuclear. All Motor Nuclear model kits are 100% genuine and sourced directly from the manufacturer. Motor Nuclear Legend of Star General MNPQ-XH04 Gan Jiang SD Version Model Kit Motor Nuclear MNP-CR01 Blazing Stars Yuheng Star 6th Leader Advanced Type Huan Ci Model Kit The Motor Nuclear MNP-CR01 Blazing Stars Yuheng Star 6th Leader Advanced Type Huan Ci is a large-scale original mecha model kit from Motor Nuclear’s Blazing Stars series. Designed as a high-ranking leader unit, Huan Ci features an expansive full-equipment configuration, multi-system weapon loadout, and modular transformation-oriented engineering. Key Features Large Full-Equipment Scale: Fully equipped configuration reaches approximately 35 cm in height and 52 cm in overall length, excluding the display base. Dual-Form Design: The mecha supports two primary configurations, expanding its play and display options. Five Independent Weapon Systems: Equipped with a wide array of weapons, forming a comprehensive combat loadout. Modular Flight Assembly: Cockpit unit, thrusters, and weapon systems can be reconfigured and combined to form a flight-mode craft. Streamlined Mechanical Aesthetics: The entire design emphasizes flowing, aerodynamic lines suited for futuristic space combat. Storage-Integrated Display Base: Includes the updated Blazing Stars “Red Heat Five-Star” base with built-in storage for hand parts and accessories. X Expansion Compatibility: First Blazing Stars unit to include a Motor Nuclear X-series expansion component. X Expansion Component X-01 High-Mobility Foot Propulsion Unit Included Equipment and Components Huan Ci main mecha body components Five independent weapon system assemblies Detachable cockpit unit Thruster and propulsion components Red Heat Five-Star display base with storage functionality X-01 high-mobility foot propulsion unit Instruction manual Specifications Brand Motor Nuclear Series Blazing Stars Model MNP-CR01 Yuheng Star No.6 – Huan Ci (Leader Advanced Type) Primary Height Approx. 22 cm (main body only) Full Equipment Height Approx. 35 cm (excluding base) Full Equipment Length Approx. 52 cm Configuration Dual-form with modular flight assembly Product Type Plastic assembly model kit IP Original third-party mecha design

Robox Animation RB-P-02 Cantonese Heavy Utility Vehicles Guangdong Cockroach Model Kit The Robox Animation RB-P-02 Guangdong Cockroach is a large-scale, highly articulated original mechanical creature model kit designed as a heavy-duty utility and assault platform. Inspired by industrial machinery and insect-based biomechanics, this kit features a multi-segmented body structure, oversized armor shells, and extensive mechanical detailing throughout the internal and external assemblies. Key Features Oversized Mechanical Insect Design: Cockroach-inspired silhouette with reinforced armor plating and articulated limbs. Large Finished Size: Assembled length exceeds approximately 14 inches, creating a strong visual presence. Multi-Joint Articulation: Segmented legs, body sections, and appendages allow for crawling, climbing, and attack poses. Modular Armor Construction: Layered shell components reveal internal mechanical structures. Transformable Components: Rear shell and body segments support expanded and combat-ready configurations. Industrial Aesthetic: Heavy machinery styling combined with bio-mechanical detailing. Mechanical Systems and Effects LED Lighting Unit: Integrated LED system for the core and sensor areas. Rotating Head Assembly: Head unit supports directional posing and attack orientation. Expandable Wing and Shell Mechanisms: Armor panels deploy to simulate combat and movement states. Rear Exhaust and Thruster Details: Mechanical exhaust structures integrated into the back assembly. Accessories and Included Parts Main cockroach mechanical body components Multi-segment articulated legs Expandable armor shell parts LED lighting unit Internal mechanical frame components Effect and detail parts Instruction manual Specifications Brand Robox Animation Model RB-P-02 Guangdong Cockroach Product Line Cantonese Heavy Utility Vehicles Scale Non-scale Material ABS plastic Lighting LED unit included Assembly Type Plastic model kit

KOSMOS LED Light Set for MG 1/100 Gundam Vidar The KOSMOS LED Light Set for MG 1/100 Gundam Vidar is a third-party LED upgrade kit designed specifically for the Bandai MG 1/100 ASW-G-XX Gundam Vidar from Mobile Suit Gundam: Iron-Blooded Orphans. This light set adds multi-point illumination to the MG Vidar, enhancing its display presence with integrated LED modules. The set includes only the LED lighting components — the MG Gundam Vidar model kit and display stand are sold separately. Key Features Designed for MG Vidar: Custom-fit LED modules engineered specifically for the Bandai MG 1/100 ASW-G-XX Gundam Vidar kit. LED Upgrade Only: This product contains only the LED light set. The MG Gundam Vidar model kit, display stand, and any other items shown in promotional images are not included. KOSMOS Brand Quality: Produced by KOSMOS, a third-party manufacturer specializing in LED lighting systems for Gundam and mecha model kits. Box Contents KOSMOS LED light set modules for MG 1/100 Gundam Vidar Installation instructions Specifications Brand KOSMOS Product Type LED Light Set (aftermarket upgrade) Compatibility Bandai MG 1/100 ASW-G-XX Gundam Vidar Scale 1/100 Materials ABS, POM, PVC Series Mobile Suit Gundam: Iron-Blooded Orphans Model Kit Included No — LED light set only Preorder Notice: This item is currently on Preorder and will be shipped once available. Please be aware that cancelling a Preorder will incur a 25% restocking fee. For detailed information on our preorder and cancellation policies, please visit our FAQs page.

Official Infinite Dimension RetailerLA Scale Model is an authorized retailer of Infinite Dimension and Animester. All Infinite Dimension and Animester model kits are 100% genuine and sourced directly from the manufacturer. Honor of Kings Kai Crimson Sky Battle Armor Model Kit The Honor of Kings Kai — Crimson Sky Armor is a posable plastic assembly model kit based on the character Kai from the mobile game Honor of Kings, produced by Animester - Nuclear Gold Reconstruction with bionic skeleton joint design by Infinite Dimension. The frame features a precise bionic design with a wealth of linkage structures. It not only boasts vivid textures sculpted along the muscle groups, but also includes delicate detailing on the arms and wing frames, further enhancing its portrayal as a mechanical life form. Key Features Bionic Skeleton Joint Design by Infinite Dimension: The frame features a precise bionic design with vivid muscle-group textures, delicate arm and wing frame detailing, and a wealth of linkage structures that enhance its portrayal as a mechanical life form. Multi-Layer Bionic Neck Structure: The neck features a multi-layer bionic structure, enabling flexible rotation at a wider angle. Every head turn drives the muscle panels on both sides to rise, fall, stretch, and contract in sync. Core Torso Articulation: The waist and abdomen support left-right bending and forward tilting. Each twist accurately reproduces the core dynamics of the human torso. Dynamic Thigh Linkage: The moment the thigh is lifted outward, the inner muscle panels bulge accordingly, as if a pulsing power lies beneath the cold mechanical armor. Independent Wing Articulation: The giant battle wings' connection points use a new independent linkage structure, and each feather wing's movement is independently custom-designed. Anti-Detachment Joint Design: Ankle joints and upper thigh root joints both use anti-detachment structures. They hold firm when standing still and remain securely locked during wide-range posing, keeping every step and turn clean and precise. Clearance Engineering for Extreme Poses: The rear foot armor and the rear underside of the shoulder armor feature clearance structures that work with the full-body bionic joint rhythm, leaving more room for extreme poses. First Press Bonus: Initial production includes one clear outer armor parts set. Included Contents Kai ×1 Base ×1 Boomerang Blade ×1 Plasma Greatsword ×1 Megaphone ×1 Alternative hand parts ×5 sets (gripping hand, charging hand, fist hand, relaxed hand, open hand) Dedicated water slide decal ×1 Orange-yellow replacement runner for head parts ×1 Specifications Item 「Kai — Crimson Sky Armor」Plastic Kit Brand Animester - Nuclear Gold Reconstruction Joint Design Infinite Dimension Series Title Honor of Kings Main Body Height Approx. 225mm Wingspan Height Approx. 236mm Materials ABS, PC, PVC, POM Product Type Plastic assembly model kit (posable) Estimated Release Q3 2026 Preorder Notice:This item is currently on preorder and will be shipped once available. Please be aware that cancelling a preorder will incur a 25% restocking fee. For detailed information on our preorder and cancellation policies, please visit our FAQs page.

Official Motor Nuclear Retailer LA Scale Model is an authorized retailer of Motor Nuclear. All Motor Nuclear model kits are 100% genuine and sourced directly from the manufacturer. Overview The Motor Nuclear BV-XH01 Xiang Yu is a plastic assembly model kit from Motor Nuclear's Valiant Grade (Xunyong / BV) line, part of the Legend of Star General series. Designated as the Lian Zhen Star Lord of Yu Heng Palace, Xiang Yu is inspired by the historical Hegemon-King of Western Chu and reimagined as an original mecha design featuring an aggressive silhouette with phoenix feather-inspired shoulder armor, bird-head motifs on the front skirt and ankle guards, and integrated clear parts throughout the structure. The Valiant Grade line represents Motor Nuclear's compact, budget-friendly entry tier - smaller in scale and part count than the flagship MNP kits, while retaining the brand's mechanical design language and articulation focus. Key Features Valiant Grade (BV) Line: Motor Nuclear's compact kit tier, delivering the brand's signature mecha aesthetics and articulation at a smaller size and lower price point than the standard MNP series. 14 Runners with Pre-Painted Details: Includes pre-painted gold runners and metallic green painted eye parts for display-ready color accuracy straight from the box. Integrated Clear Parts: Transparent components built into the frame accentuate internal mechanical detail and add visual depth to the finished build. POM Joint Components: Dedicated black POM runner provides durable, stable connection points across the frame's articulation joints. Overlord Spear (Ba Wang Qiang): Xiang Yu's signature polearm weapon features a hybrid spearhead-halberd design rather than a simple spear tip, reflecting the character's origin as a warrior-king. Aluminum Foil Sticker Sheet: Included for shoulder armor color detail, adding metallic accents without the need for paint or aftermarket decals. Four Pairs of Interchangeable Hands: Fists, relaxed hands, gripping hands, and angled gripping hands provide versatile display and weapon-holding options. Builder Context The BV-XH01 Xiang Yu is an entry-level kit with simple structure and smooth assembly flow, suitable for beginners. The 14-runner part count and snap-fit construction make it a quick, satisfying build that experienced builders can finish in a single sitting. Comparable in difficulty and scale to a Bandai HG kit, with no glue or paint required for a complete appearance. Sharp design elements on the armor are chamfered for safe handling. Gate placement is mostly standard and exposed, with a small number of hidden gates. Why Build This Kit The Motor Nuclear BV-XH01 Xiang Yu is the most affordable entry point into the Legend of Star General series currently available, priced well below the standard MNP-line kits like Bai Qi ($75+) or Zhao Yun ($160+) while still carrying Motor Nuclear's original mecha design identity. At 15.5 cm, Xiang Yu falls between 1/144 and 1/100 Gundam scale in height and sits comfortably alongside HG or small MG kits on a shelf, but offers a Chinese mythology-inspired aesthetic - complete with phoenix feather shoulder details and bird-head armor motifs - that is visually distinct from anything in the Gundam catalog. The 14-runner build with pre-painted gold and metallic green parts delivers a display-ready result without painting, making it a practical introduction to the Motor Nuclear brand for builders who do not want to commit to the larger, heavier, multi-session MNP kits. Unlike the SP-XH01 alloy action figure version of Xiang Yu, the BV plastic model kit does not include the greatsword or display base - it ships with the Overlord Spear as the sole weapon, though the stand connector is compatible with the SP version's base. Builders who enjoy the BV-XH01 can scale up to the MNP line with confidence that Motor Nuclear's engineering conventions and design language will carry over. Box Contents 14 runners (including pre-painted gold runners and black POM joint runner) Pre-painted metallic green eye parts Clear parts Overlord Spear (Ba Wang Qiang) weapon Four pairs of interchangeable hands (fists, relaxed hands, gripping hands, angled gripping hands) Aluminum foil sticker sheet (shoulder armor detail) Instruction manual Specifications Brand Motor Nuclear Series Legend of Star General Line Valiant Grade (Xunyong / BV) Model Number BV-XH01 Character Xiang Yu - Hegemon-King of Western Chu Character Designation Lian Zhen Star Lord of Yu Heng Palace Height Approx. 15.5 cm (6.1 in) Runner Count 14 Material ABS, POM Product Type Plastic assembly model kit (snap-fit) IP Original third-party mecha design Country of Origin China JAN 6972147749484 Preorder Notice: This item is currently on preorder and will be shipped once available. Please be aware that cancelling a preorder will incur a 25% restocking fee. For detailed information on our preorder and cancellation policies, please visit our FAQs page.

Hemoxian 1/10 Over Zero UTX-6030 Tastier Model Kit The Hemoxian 1/10 Over Zero UTX-6030 Tastier is a third-party mecha model kit depicting the military cyborg "Tastier" from the original Over Zero universe. Unlike traditional mecha kits, Tastier is designed as a biomechanical power-armor unit with TPE soft-rubber musculature that deforms naturally during posing - simulating hydraulic pistons, spinal flexion, and muscle contraction across the arms, legs, and torso. Hemoxian (also known as NonZero Studio) is a Chinese manufacturer known for integrating functional mechanical gimmicks into snap-fit model kits, and Tastier is the flagship product of their Over Zero original IP line. Key Features TPE Biomimetic Muscle System: Red soft-rubber components across the neck, arms, spine, and legs compress and deform when joints are articulated, simulating functional power cables and musculature. Hydraulic Piston Linkage: Four hydraulic rods in the waist produce mechanical linkage movement during torso rotation, lateral bending, and forward/backward lean. Ankle pistons extend and retract during foot articulation. LED Eye Unit: Built-in LED module with rear-mounted switch illuminates eight interchangeable compound-eye sticker designs. Requires one CR927 3V button cell battery. Modular Mechanical Dog: General-purpose support mecha that functions as a standalone articulated unit, separates into an electromagnetic cannon (hand weapon) and a jet-propulsion backpack that mounts to Tastier's back. Composite Maintenance Base: Display stand with integrated weapon storage featuring dedicated slots for each accessory, diecast flexible snake-bone support arm, and a rotatable weapon-rack display mode. First-Batch Bonus Cloak: Cloth cloak with embedded internal wire for custom shaping and tattered-edge detailing at the hem. Partially Pre-Painted: Silver armor accents and select details are pre-painted. Color-separated plastic molding achieves accurate color layout without painting. Builder Context Tastier is an intermediate-level snap-fit kit that requires no cement or painting for a complete build, though nippers and basic cleanup tools are recommended. Assembly fitment runs slightly tight, and some force is needed during construction. The TPE rubber components and locking clip joints give the finished model a tactile, toy-like solidity that is unusual for a model kit - experienced builders often compare the handling feel to a finished action figure rather than a typical plastic kit. Builders familiar with MG-grade Bandai kits will find the articulation engineering comparable, with the biomimetic muscle system offering a build experience unlike anything in the Gundam ecosystem. Why Build This Kit The Hemoxian UTX-6030 Tastier is the recommended entry point into the Over Zero series due to its complete accessory package - the full set includes the main figure, mechanical dog, and maintenance base, making it the most value-dense offering in Hemoxian's current lineup. The TPE biomimetic muscle system sets Tastier apart from every other third-party mecha kit on the market; no Bandai kit at any grade currently replicates the functional piston-and-muscle deformation gimmick that Tastier uses across its entire body. At 19.5 cm with the mechanical dog and maintenance base included, Tastier offers more display volume and play options than most kits at double its price point. Builders who are comfortable with RG or MG Bandai kits but want something outside the Gundam universe will find Tastier's build complexity and joint engineering familiar, while the power-armor aesthetic and weapon-swapping modularity provide a distinctly different shelf presence. The one known build issue across reviews is that small gray leg-guard attachments can be difficult to fit as shown in the manual - test-fitting before committing is recommended. Box Contents Tastier main figure components (partially pre-painted) General-purpose mechanical dog (partially pre-painted) Composite maintenance base Diecast flexible snake-bone support arm Rifles x2 Pistols x2 (with functioning slide mechanism) Daggers x4 Light blade effect parts (forearm-mounted) Weapon firing effect parts (pistol, rifle, and electromagnetic cannon) Blade swing particle effect part LED eye unit (requires CR927 3V battery) Metal etching sheets x2 Water-slide decal sheets x3 Metal hose First-batch bonus cloth cloak (wire-embedded) Cityscape photo backdrop card Instruction manual Brand Hemoxian (NonZero Studio) Series Over Zero Model UTX-6030 Tastier Scale 1/10 Height (Tastier) Approx. 19.5 cm (7.67 in) Height (Mechanical Dog) Approx. 8.0 cm Height (Maintenance Base) Approx. 3.5 cm Materials ABS, PS, TPE, stainless steel, steel, cotton, PU Assembly Snap-fit (no cement required) Battery CR927 3V button cell (check packaging for inclusion) Release Year 2024 Backorder Notice:This item is currently on backorder and will be shipped once available. Please be aware that cancelling a backorder will incur a 25% restocking fee. For detailed information on our backorder and cancellation policies, please visit our FAQs page.

Official Motor Nuclear Retailer LA Scale Model is an authorized retailer of Motor Nuclear. All Motor Nuclear model kits are 100% genuine and sourced directly from the manufacturer. Motor Nuclear MNP-CR02A Type-65 JiHu-II Assault Ver. Model Kit The Motor Nuclear MNP-CR02A Type-65 JiHu-II (Assault Ver.) is a 1/48 scale mecha model kit from the Blazing Stars sub-line within Motor Nuclear's Legend of Star General series. Built around a full die-cast alloy inner frame, the JiHu-II is a land warfare assault mecha drawing its design language from modern tanks and armored vehicles - riveted armor plates, lifting lugs, tread-equipped feet, and a green military color scheme with gradient depth. Motor Nuclear's Blazing Stars (CR) line focuses on military-styled mecha units distinct from the mythology-driven XH character kits, and the JiHu-II is one of the most anticipated entries in the series. Key Features Full Die-Cast Alloy Inner Frame: Complete metal skeleton comes partially pre-assembled, providing weight, rigidity, and stable posing for an imposing display presence 30+ Point Deployable Armor System: Outer armor panels open independently across the entire body to reveal internal mechanical structures, simulating a maintenance/overhaul mode with linked mechanical movement Massive Weapon Arsenal: Automatic rifle with detachable magazines, concealed forearm grenades, thigh-mounted daggers, two grenade launchers (standard and revolver-type with swing-out cylinder), missile pod with linked deployment, a Chinese-style halberd, shield with sliding armor panels, and two back-mounted mechanical arms for ammunition transfer Dual Interchangeable Heads: Standard twin-eye head and mono-eye head with optional face mask attachment, each with distinct antenna configurations 663 Parts Across 34 Runners: Approximately 600 pre-painted parts with optimized runner layout for an improved build experience over previous Motor Nuclear releases LED-Ready Construction: Pre-cut slots at the chest, eyes, and cockpit for aftermarket LED installation (LEDs not included) 1/48 Scale Pilot Figure and Display Base: Includes a buildable pilot figure with two head options and a standard display base Builder Context The JiHu-II Assault Ver. is an intermediate-level kit suited for builders with at least a few snap-fit kits under their belt. Assembly is snap-fit with pre-colored parts and does not require cement or painting for a complete look, though panel lining and topcoating will bring out the military surface detail. The alloy inner frame arrives partially pre-assembled. At 663 parts across 34 runners, build complexity exceeds most Bandai MG kits and is comparable to a large Real Grade in terms of part density, with the added step of integrating die-cast frame components. Water slide decals are included for final detailing. Why Build This Kit The Motor Nuclear MNP-CR02A JiHu-II Assault Ver. is the most weapon-dense kit in the Blazing Stars line, with over ten distinct armaments that store, mount, and combine across the frame in ways that reward posing experimentation. The 30+ point deployable armor system sets it apart from other kits at this price point - no other sub-$110 mecha kit from any manufacturer currently offers a full-body maintenance mode reveal. At 22.5 cm and 1/48 scale with a full alloy frame, the JiHu-II has noticeably more heft and shelf presence than a Bandai MG of similar height, and the military-realist design language appeals to builders who find Gundam aesthetics too anime-styled. Motor Nuclear's runner layout and undergating have improved significantly with this release compared to earlier Legend of Star General kits, making it a reasonable entry point into the brand for builders comfortable with RG-grade Bandai kits. Builders should note that Motor Nuclear parts are known for sharp edges due to precise mold tolerances - side cutters and light sanding are recommended, and the alloy frame joints may need minor adjustment for optimal tension. Box Contents 34 runners (approximately 600 pre-painted parts, 663 total) Die-cast alloy inner frame components (partially pre-assembled) Standard twin-eye head Mono-eye head with optional face mask Automatic rifle with detachable magazines 2 x concealed forearm grenades 2 x thigh-mounted daggers Standard grenade launcher Revolver-type grenade launcher with swing-out cylinder Missile pod with linked deployment mechanism Chinese-style halberd Shield with sliding armor panels 2 x back-mounted mechanical arms Rear skirt ammo resupply rack with 4 removable magazines Interchangeable hand parts 1/48 scale pilot figure (2 head options) Display base Water slide decals Assembly instructions Specifications Series Legend of Star General - Blazing Stars Manufacturer Motor Nuclear Model Code MNP-CR02A Designation Type-65 JiHu-II (Assault Ver.) Scale 1/48 Height Approx. 22.5 cm (8.9 inches) to head Parts Count 663 parts across 34 runners Materials ABS, POM, PVC, die-cast alloy EAN 6972147749521 Preorder Notice: This item is currently on preorder and will be shipped once available. Please be aware that cancelling a preorder will incur a 25% restocking fee. For detailed information on our preorder and cancellation policies, please visit our FAQs page.

Official SNAA RetailerLA Scale Model is an authorized retailer of SNAA. All SNAA model kits are 100% genuine and sourced directly from the manufacturer. SNAA SC-010 Furious Warhammer Galahad The SNAA SC-010 Furious Warhammer Galahad is a 1/144 scale model kit from the Beyond Exquisite (BE) Round Table Knights series. Galahad is the final unit in the Sanctuary tier - the highest of three ranks in the Round Table Knights lineup (Gale, Steel Knight, and Sanctuary) - and is designed as a heavy assault knight-class mecha built to overwhelm defensive formations through raw power. SNAA is a Chinese original-IP manufacturer known for Western fantasy-themed mecha designs, and the Round Table Knights line is their most popular series among NA builders. Key Features Heavy Assault Design: Galahad has the stockiest, most heavily armored silhouette in the Round Table Knights lineup, with layered shoulder armor, a horned knight helmet, and reinforced leg plating designed for a tank-class battlefield role. Oversized Battle Axe: The primary weapon is a large-format battle axe with a broad crescent blade, giving the kit a distinct melee-focused identity compared to the sword and lance loadouts of other Round Table Knights. Arm-Mounted Shield: An integrated shield unit is built into the left forearm, maintaining Galahad's defensive theme without requiring a separate handheld shield part. Assault Hoverboard Base Unit: Galahad includes a bladed vehicle-style hoverboard that the unit can be mounted on, making it the only Round Table Knight with a dedicated ride-on assault platform. Forearm Blade/Claw: The right forearm features an integrated blade or claw attachment for close-quarters combat options beyond the primary axe. Full Inner Frame: Complete articulated skeleton consistent with all BE-series kits, supporting dynamic posing and cross-unit part compatibility. Pre-Painted Armor Panels: Multi-color separated parts with pre-painted accents for a display-ready finish out of the box. Builder Context Assembly is snap-fit with pre-painted armor. No painting or cement is required for a finished display. Build complexity is comparable to Bandai RG-grade kits, with a similar part count and inner frame structure. Water-slide decals are expected to be included for detail finishing, consistent with all previous BE-series releases. Recommended for intermediate builders or anyone who has completed at least one RG or MG kit. Why Build This Kit The SNAA SC-010 Furious Warhammer Galahad is the heaviest-looking unit in the Round Table Knights series and the only one that includes a dedicated ride-on assault vehicle, making it visually distinct from every other kit in the lineup. Where previous Sanctuary-tier knights like Percival (SC-009) emphasized weapon density and ranged capability, Galahad commits fully to a tank-class melee archetype with its oversized battle axe, integrated arm shield, and reinforced armor plating. At approximately 18 cm tall before mounting on its hoverboard base, Galahad will have the largest combined display footprint of any 1/144 Round Table Knight released to date. The Round Table Knights BE line uses snap-fit construction with pre-painted armor panels and full inner frames at price points that consistently undercut Bandai RG kits, and Galahad continues that value pattern. Builders who already own other Round Table Knights will find the shared inner frame system familiar, while the mounted hoverboard configuration offers a posing option that no other kit in the series provides. Box Contents Furious Warhammer Galahad main body components Battle axe x1 Arm-mounted shield x1 Forearm blade/claw x1 Assault hoverboard base unit x1 Water-slide decal sheet (expected) Instruction manual Specifications Brand SNAA x Starry Craftsman Series The Round Table Knights - Beyond Exquisite (BE) Model SC-010 Furious Warhammer Galahad Tier Sanctuary Scale 1/144 Height Approx. 18 cm Material ABS, POM, PVC Product Type Snap-fit Plastic Model Kit Preorder Notice:This item is currently on preorder and will be shipped once available. Please be aware that cancelling a preorder will incur a 25% restocking fee. For detailed information on our preorder and cancellation policies, please visit our FAQs page.

Overview The Mecha Core Industry 1/100 Oberon Dark Angel Ver. 2.0 is a color variant and partial retool of the original Oberon, rendered in a black, dark gray, red, and gold color scheme inspired by dark angel aesthetics. Beyond the new colorway, this version introduces newly tooled parts - a redesigned head, an alternate chest armor option, and alternate foot armor - making it a structural upgrade rather than a simple repaint. Mecha Core Industry (also known as Nucleus Industrial or Tian Wei) is a Chinese third-party mecha manufacturer whose Oberon is the centerpiece of their Star Guardian line, recognized for its MG-scale engineering and 52 cm wingspan backpack system. Key Features Dark Angel Color Scheme - Black and dark gray outer armor over a gold matte inner frame, with deep red accent parts across shoulders, front skirt, lower legs, and collar New-Tooling Parts (Ver. 2.0) - Redesigned head sculpt with a more angular Gundam-style silhouette, alternate wider chest armor with dark gray heat sinks, and streamlined alternate foot armor Transparent Armor Options - Includes transparent black outer armor runner (swappable with solid black) and transparent red parts (swappable with solid dark red), allowing builders to reveal the gold inner frame beneath 52 cm Wingspan Backpack - Large articulated wing system with internal linkage mechanisms and built-in wing-tip supports for freestanding display Full Weapon Loadout - Energy sword, composite gun-shield, dual close-combat sabers, and dual modular close-combat weapons, all recolored to match the Dark Angel scheme Funnel System with Dedicated Display - Six feather-style remote funnels with individual transparent stands and a ring-shaped display base for floating formation arrangements Gold Matte Inner Frame - Pre-colored internal skeleton with hydraulic rod linkage at the waist and multi-joint articulation throughout the legs Builder Context The Oberon Dark Angel Ver. 2.0 is an intermediate-to-advanced build with 25 runners and snap-fit construction that does not require cement. Builders familiar with MG-grade Bandai kits will find the complexity comparable, though third-party fit tolerances apply - some pegs may need reaming or reinforcement. The wing backpack joints benefit from tightening with a joint reinforcement pen for stable posing, and the front skirt's small red accent parts can come loose during handling. An action base is recommended for display with the full wing system deployed, as the backpack weighs nearly as much as the body. Why Build This Kit The Mecha Core Industry 1/100 Oberon Dark Angel Ver. 2.0 is one of the few third-party 1/100 mecha kits that offers both a dramatic color variant and genuinely new tooling - the redesigned head, wider chest armor, and angular foot plates give the Dark Angel a distinct silhouette rather than just a palette swap. At 23 cm tall with a 52 cm wingspan, the completed build has commanding shelf presence that exceeds most MG Gunpla in sheer footprint, making it a natural display centerpiece. The transparent black and transparent red armor options add visual depth by revealing the gold inner frame, which gives intermediate builders a way to achieve a layered look without painting. Builders who already own the original white Oberon will find the Dark Angel version worth building separately for the new head and chest sculpt alone, while newcomers to Mecha Core Industry should note that the original Oberon's known fit issues - tight wing pivot joints, loose heel armor pegs, and small parts that detach on the front skirt - carry over here and benefit from basic tools like a joint reinforcement pen and nippers. For builders looking at Wing Gundam-inspired third-party kits in the 1/100 range, the Oberon Dark Angel competes directly with kits like the Infinite Dimension Genesis and Motor Nuclear offerings at a similar price point, with the funnel system and dual-option transparent armor giving it an edge in accessory count. Box Contents 25 runners (including transparent black and transparent red runners) Gold matte pre-colored inner frame runners New-tooling head parts New-tooling chest armor parts New-tooling foot armor parts Original head, chest, and foot armor parts (builder's choice) Energy sword Composite gun-shield Close-combat sabers x2 Modular close-combat weapons x2 Feather funnels x6 Dedicated transparent funnel stands x6 Circular funnel display base x1 Optional gold pre-painted armor runner x1 Specialized hands x4 pairs (open, gun grip, sword grip, fist) Display base with wing engraving x1 Display base support arm x1 Water-slide decal sheet x1 Instruction manual x1 Specifications Scale 1/100 Height 23 cm (9.1 in) Wingspan 52 cm (20.5 in) Material ABS Runner Count 25 Assembly Snap-fit, no cement required Manufacturer Mecha Core Industry (机核工业) Series Star Guardian Version Dark Angel Ver. 2.0

Official Motor Nuclear Retailer LA Scale Model is an authorized retailer of Motor Nuclear. All Motor Nuclear model kits are 100% genuine and sourced directly from the manufacturer. Overview The Motor Nuclear BV-XH02 Wen Zhong is a plastic assembly model kit from Motor Nuclear's Valiant Grade (Xunyong / BV) line, part of the Legend of Star General series. Designated as the Tian Li Star - Lei Sheng Pu Hua, Wen Zhong is inspired by Grand Preceptor Wen Zhong from the classic Chinese novel Investiture of the Gods (Fengshen Yanyi), reimagined as an original mecha design with a lightning-elemental theme expressed through blue-green transparent accent parts with metallic backing, spike-style armor geometry, and wide-shouldered aggressive proportions. The Valiant Grade line is Motor Nuclear's compact, budget-friendly entry tier - smaller in scale and part count than the flagship MNP kits, while retaining the brand's mechanical design language and articulation focus. Key Features Valiant Grade (BV) Line: Motor Nuclear's compact kit tier, delivering the brand's signature mecha aesthetics and articulation at a smaller size and lower price point than the standard MNP series. 13 Runners with Pre-Painted Details: Includes pre-painted gold runners and pre-painted metallic blue-green eye parts for display-ready color accuracy straight from the box. Lightning-Themed Transparent Parts: Blue-green transparent components are integrated throughout the shoulders, arm armor, and frame, with silver metallic paint applied to the interior surfaces for enhanced reflectivity and visual depth. Transformable Dual Gold Whips: Two multi-segment gold whips serve as the primary weapons. Each segment rotates independently, allowing the whips to be reconfigured into dual sword mode or combined into a single large weapon. POM Joint Components: Dedicated black POM runner provides durable, stable connection points across the frame's articulation joints - the same frame structure used in the BV-XH01 Xiang Yu. Four Pairs of Interchangeable Hands: Fists, straight grip, and angled grip hands provide versatile display and weapon-holding options. Full Articulation System: Head tilt and 360-degree rotation, pull-out shoulder joints, full arm raise and bend range, waist tilt, pull-down hip joints, and front/rear skirt armor with dedicated clearance mechanisms for leg posing. Builder Context The BV-XH02 Wen Zhong shares the same frame structure as the BV-XH01 Xiang Yu, making it an entry-level kit suitable for beginners. The 13-runner part count and snap-fit construction make it a quick, satisfying build that experienced builders can finish in a single sitting. Comparable in difficulty and scale to a Bandai HG kit, with no glue or paint required for a complete appearance. Some individual part connections may be tight due to POM joint tolerances - standard for this frame system. Why Build This Kit The Motor Nuclear BV-XH02 Wen Zhong is the second release in the Valiant Grade line and offers a meaningful upgrade over the BV-XH01 Xiang Yu in weapon complexity - the transformable dual gold whips that convert between whip, dual sword, and combined modes give it more display versatility than Xiang Yu's single Overlord Spear. At approximately 15 cm, Wen Zhong sits comfortably alongside Bandai HG kits on a shelf but offers a Chinese mythology-inspired spike-style aesthetic with lightning-themed transparent accents that is visually distinct from anything in the Gundam catalog. Builders interested in Motor Nuclear but not ready for the 50+ runner MNP-line kits will find the Valiant Grade Wen Zhong a practical entry point that demonstrates the brand's design language - wide shoulders, narrow waist, aggressive silhouette, integrated clear parts - at a fraction of the build time and cost. The character also previews what to expect from the upcoming full-size MNP-XH11 Wen Zhong and Black Qilin kit, which will include an alloy inner frame and a buildable mount. Box Contents 13 runners (including pre-painted gold runners and black POM joint runner) Pre-painted metallic blue-green eye parts Blue-green transparent parts with silver metallic interior coating Two multi-segment gold whips (transformable to dual swords or combined weapon) Four pairs of interchangeable hands (fists, straight grip, angled grip, default) Instruction manual Specifications Brand Motor Nuclear Series Legend of Star General Line Valiant Grade (Xunyong / BV) Model Number BV-XH02 Character Wen Zhong - Grand Preceptor Character Designation Tian Li Star - Lei Sheng Pu Hua Height Approx. 15 cm (5.9 in) Runner Count 13 Material ABS, POM Product Type Plastic assembly model kit (snap-fit) IP Original third-party mecha design Country of Origin China Preorder Notice: This item is currently on preorder and will be shipped once available. Please be aware that cancelling a preorder will incur a 25% restocking fee. For detailed information on our preorder and cancellation policies, please visit our FAQs page.

Official Infinite Dimension RetailerLA Scale Model is an authorized retailer of Infinite Dimension and Animester. All Infinite Dimension and Animester model kits are 100% genuine and sourced directly from the manufacturer. Overview The Sky Blaze (Unit 03) is a 1/72 scale snap-fit action model kit from the Core Crystallizer series, produced as a joint release between Animester and Infinite Dimension under the Infinite Rank product line. Designed around a heavy-assault concept with a core energy-pulse motif, the kit centers on a sniper-cannon loadout and a fully articulated multi-layer internal frame. It stands roughly 32 cm at the main body and approximately 38 cm in its full-armor configuration, with over 25 pre-painted runners that include metallic-finished armor parts. Key Features Multi-layer internal frame: targeted load-bearing structure with reinforced key joints for stable, high-tension poses. POM gear joint system: gear-driven ratchets at the hips, knees, and ankles produce click-stop positioning, with a high-strength integrated hip axle. Near 80% leg armor articulation: multi-stage linked waist structure allows deep forward-lean and back-bend poses. Pre-painted metallic parts: over 25 pre-sprayed runners, with metallic-color parts finished using a detailed multi-stage coloring process. Five-axis precision tooling: parts cut on five-axis machinery for sharp surface detail. Heavy weapons loadout: two pulse rifles, two heavy sniper cannons, and a tactical backpack. Upgraded exclusive display base: high-strength chassis with multi-position adjustable bracket slots that lock height and angle, plus replaceable bracket heads. Builder Context This is an intermediate to advanced build aimed at experienced hobbyists. It is a snap-fit kit with pre-painted metallic parts, so paint is optional rather than required, and the multi-layer inner frame and gear-joint engineering place it closer to MG-grade Bandai kits than to beginner snap kits in assembly complexity. Why Build This Kit The Animester x Infinite Dimension Sky Blaze (Unit 03) is built for collectors who want a large-format third-party mecha with a display-ready finish out of the box, since it ships with over 25 pre-painted runners and metallic-finished armor that remove the need for painting. In its full-armor configuration it stands roughly 38 cm, giving it a much larger shelf footprint than a standard 1/100 Master Grade kit despite its 1/72 scale, driven by the sniper-cannon and backpack loadout. Its multi-layer internal frame and POM gear joints at the hips, knees, and ankles are engineered to hold large action poses, placing its articulation closer to MG-grade Bandai kits than to entry-level snap kits. Builders should know the load-bearing structure relies on POM ratchet gears that click-stop at each angle, so heavy weapons like the twin sniper cannons are intended to be balanced through the joints and the included display base rather than through hand grip alone. The first-batch release adds two semi-translucent blue ion saber effect parts, which are not guaranteed on later production runs. Box Contents Sky Blaze main body x1 Pulse Rifle x2 Heavy Sniper Cannon x2 Tactical Backpack x1 Posing hands x5 pairs (gripping, charging, fist, relaxed, open) Sky Blaze exclusive display base x1 Three-claw mechanical arm x2 Leg smoked-clear (black translucent) replacement parts x2 First-batch bonus: Ion Saber x2 (semi-translucent blue) Specifications Brand Animester x Infinite Dimension Product Line Infinite Rank Series Core Crystallizer Unit Unit 03 (Sky Blaze) Scale 1/72 Height (Main Body) approx. 32 cm Height (Full-Armor Form) approx. 38 cm Material ABS, POM Assembly Snap-fit, pre-painted Release Q4 2026 Preorder Notice:This item is currently on preorder and will be shipped once available. Please be aware that cancelling a preorder will incur a 25% restocking fee. For detailed information on our preorder and cancellation policies, please visit our FAQs page.