Gundam Gunpla

Evangelion Production Model Custom Type-08α (汎用ヒト型決戦兵器 人造人間エヴァンゲリオン 正規実用型（ヴィレカスタム） 8号機α[?], "Hanyō Hitogata Kessen Heiki Jinzō Ningen Evangerion Seiki Jitsuyōgata (Vire Kasutamu) Hachigōki Arufa", lit. "General-Purpose Humanoid Battle Weapon Android Evangelion Utility Model (WILLE Custom) Unit Eight Alpha") is an Evangelion Unit belonging to the Rebuild of Evangelion movie series. It appears briefly in Evangelion: 3.0 You Can (Not) Redo, the Unit is piloted by Mari Makinami Illustrious and is fighting alongside Evangelion Production Model-02'β, against the Evangelion Mark.04 during the Operation US. Evangelion Production Model Custom Type-08α (汎用ヒト型決戦兵器 人造人間エヴァンゲリオン 正規実用型（ヴィレカスタム） 8号機α[?], "Hanyō Hitogata Kessen Heiki Jinzō Ningen Evangerion Seiki Jitsuyōgata (Vire Kasutamu) Hachigōki Arufa", lit. "General-Purpose Humanoid Battle Weapon Android Evangelion Utility Model (WILLE Custom) Unit Eight Alpha") sports the same basic shape as other production model Evangelions, mainly colored pink with white trim and some yellow details. Its status as a custom type, however, causes it to have some noticeable differences. The helmet of the unit sports three horns aimed slightly backwards, with eight individual eyes colored neon green distributed in the front.

Evangelion Unit-00 (エヴァンゲリオン 零号機[?], "Zerogōki") is the first functional Evangelion unit created, serving as the prototype for the rest of the Evangelion series. It is piloted by Rei Ayanami. Unit-00 is the Prototype, the first successful Evangelion, and is piloted by the First Child, Rei Ayanami. The head design is similar to that of the previous failed attempts, but with only one camera. There are two domes on the top of the head, one white and one transparent green; their function (if any) is never revealed. Unit-00 is the only one of the original Evangelions that is never seen without its armor (Unit-02 was revealed in The End of Evangelion, and Unit-01 on multiple occasions) or opening its mouth; thus the appearance of its organic body is unknown.Unit-00 was initially colored orange like the previous prototypes, but its armor was damaged beyond repair by the Angel Ramiel's particle beam. The subsequent repairs and upgrades included blue armor plating in addition to other alterations made in order to make it more suitable for combat conditions. It was later refered as Evangelion Unit-00' (エヴァンゲリオン 零号機(改)[?], "Evangerion Zerogōki Kai").The upgrades to Unit-00's armor make it look more like the subsequent Evangelions, but there are still several differences or actual limitations. Shoulder pylons are added to the Unit's armor; though similar in appearance to the ones on Units 01 and 02, they are used to hold retro-rockets, as seen in the fight with the ninth Angel, Matarael. Because it is only the prototype, Unit-00 cannot be fitted with D-Type Equipment. The true nature of the soul inside Unit-00 is never specified, but it is implied to be directly connected to Rei in some fashion. Unit-00 was self-destructed by Rei in order to destroy the sixteenth Angel, Armisael.

GN-0000+GNR-010/XN 00 XN Raiser (aka 00 XN Raiser, pronounced Double-Oh Sun Raiser), is the combination of the GN-0000 00 Gundam and the GNR-010/XN XN Raiser. It appears in the Mobile Suit Gundam 00V side story. 00 XN Raiser carries a pair of GN Buster Sword IIIs that can combine into one large sword. The additional pair of manipulator arms on the XN Raiser allows the 00 XN Raiser to carry more weapons, as well as grant it another pair of arms for combat use. XN Raiser's binders do not dock into the 00 Gundam's twin GN Drives; instead, they fold up when the XN Raiser is docked onto the 00 Gundam. The entire system docks onto the 00 Gundam's back as a weapons backpack.

The MBF-02VV Gundam Astray Turn Red is a Mobile Suit appearing in the Mobile Suit Gundam SEED Destiny Astray R photonovel. The Gundam Astray Turn Red is a mobile suit created by Valerio Valeri for his own use. However, since the suit is fully controlled by the combat AI called "80", he does not need to do any actual piloting, although he still sits in the cockpit. The suit has a custom head unit and backpack. Its main body is constructed using MBF-P0X Gundam Astray Noir's spare parts and its body color is basically a reverse of MBF-P02 Gundam Astray Red Frame's (hence the suit's name).The Turn Red is usually armed with a pair of head-mounted CIWS and a pair of Tactical Arms on its back, but it can also be equipped with the same type of beam rifle, beam sabers and shield as the Red Frame. It also carries additional power packs for the Tactical Arms like MBF-P03secondL Gundam Astray Blue Frame Second L. The mobile suit is supposed to be used alongside CAT1-VGR Hyperion GR and CAT1-VGL Hyperion GL, both are commandeered by the Turn Red itself and serve as its protectors during battle. The Turn Red is installed with the Trio System to improve its cooperation with the other two AI-controlled suits.

The WMS-03 Maganac is a mobile suit featured in Mobile Suit Gundam Wing. The WMS-03 Maganac was a mobile suit developed by the countries of the Middle East to counter OZ and the United Earth Sphere Alliance. Intended for operations in the desert, an unusual environment for mobile suits, the Maganac was given high dust-proof capabilities and mobility. Despite being mobile suits with specifications close to local types, they have high versatility and their performance surpassed the OZ-06MS Leo. The Maganac was also developed to be operated in cooperation with the XXXG-01SR Gundam Sandrock. Almost all of the 40 units were individually customized to have different abilities and traits such as enhanced melee combat capabilities and communication functions depending on their pilots' skills and roles, there is also the commander type piloted by Rasid Kurama, the leader of the Corps. They can also be adapted for operations in space.

The MSA-005 Methuss is a mobile suit introduced in the anime Mobile Suit Zeta Gundam. The Methuss was the first true transformable mobile suit produced by Anaheim Electronics for the AEUG under their "Project Zeta". It served as a testbed for the transformation structure and the gathered data was later used in the development of MSZ-006 Zeta Gundam and the MSZ-008 ZII. Like the Zeta Gundam, the Methuss was very fast and agile in mobile armor mode. However as a prototype unit, it was only armed with two arm beam guns and six beam sabers. During combat, the Methuss can also serve as a support machine, acting as a second power generator for the upgraded Mega Bazooka Launcher.

The MSN-04 II Nightingale (MSN-04II ナイチンゲール?) is a mobile suit introduced in Mobile Suit Gundam: Char's Counterattack - Beltorchika's Children. It was piloted by Char Aznable during Char's Rebellion .The MSN-04 II Nightingale was developed exclusively for Char Aznable, the leader of Neo Zeon. its most prominent feature was the incorporation of a Psycho-Frame. As a result, the Nightingale was completed as a Mobile Sit (MS) with capabilities akin to a Mobile Armor (MA). The Nightingale was an MS with exceptional abilities and its silhouette greatly deviated from a human design, with overhanging binders on both shoulders, a large rear armor piece that extended backwards, and front armor as large as the legs. Despite its unconventional design., mobility devices placed on the shoulders and rear armor enabled the MS to gain high mobility and operability, and the five propellant tanks allowed for long combat operations. It was armed with a long-range, high-0power Large Mega Beam File, a Beam Tomahawk equipped with three devices, and 10 funnels. This armament configuration enabled the MS to gain combat abilities that could flexibly adapt to firefights, melee combat, and perform all-range attacks. The Nightingale was deployed during Char's Rebellion and overwhelmed Amuro Ray's RGZ-91 Re-GZ. It was as powerful as the RX-93-ν2 Hi-ν Gundam during the battle over Axis .

The RX-78-2 Gundam is the titular mobile suit of Mobile Suit Gundam television series. Part of the RX-78 Gundam series, it was built in secret on Side 7. The Gundam would turn the tide of war in favor of the Earth Federation during the One Year War against the Principality of Zeon. It was primarily piloted by Amuro Ray.

The MSN-06S Sinanju (aka Sinanju) is a mobile suit featured in the Mobile Suit Gundam Unicorn novel, its OVA adaptation and the television re-cut. A modified version of the MSN-06S Sinanju Stein, it was piloted by Full Frontal.

GN-001/hs-A01 Gundam Avalanche Exia (aka Gundam Avalanche Exia, Avalanche Exia) is a variant of the GN-001 Gundam Exia appearing in the side stories Mobile Suit Gundam 00V and Mobile Suit Gundam 00V: Battlefield Record. The Gundam Avalanche Exia is the Celestial Being's Gundam Exia equipped with additional high mobility unit known as "Avalanche Unit". The Gundams have exceptional flight control capabilities through the use of GN Particles, but their speed in the atmosphere and in space are generally inferior to that of specialized high-speed units such as aircrafts. Celestial Being's general mechanic, Ian Vashti, designed and created the Avalanche Unit to grant Exia a high level of mobility comparable to an aircraft's. This concept of utilizing a mobile suit like an aircraft is very similar to the AEU's, and might have been because Ian was previously the chief mechanic of AEU's armed forces and is highly skilled in such utilization of mobile suit.The multiple parts that make up the Avalanche Unit are equipped with GN Condensers and by discharging all their stored GN Particles through various verniers simultaneously, the Avalanche Exia can achieve a higher level of mobility. Additionally, during high-speed movements, the Avalanche Exia's forearm and shoulder parts are linked together in a quasi-transformation like manner. This reduces air resistance and generates a thin GN Field on the machine's surface to control the airflow on the exterior. The name, Avalanche, carries the meaning of "passing by in an instant, consuming everything in its path" and like its name, the mobile suit can outspeed the latest aerial combat mobile suits such as the SVMS-01 Union Flag, AEU-09 AEU Enact and even its fellow Gundam, the transformable, high-speed GN-003 Gundam Kyrios. The "hs" in its model number stands for "High Speed" and the "A01" means "Avalanche type Unit 1".The drawbacks of the Avalanche Exia are that it takes an hour to fully charge the Avalanche Unit's GN Condensers with GN Particles, which will be completely discharged in 10 minutes, limiting the use of the mobile suit to an extremely brief period of time and restricting its travel range. Even so, the Avalanche Exia still has high utility value as it allows the Exia to reach its combat location swiftly. While the one-hour charging time seems to make the Avalanche Exia unusable for unplanned missions, this issue is resolved to a certain degree as Ian always keeps the Avalanche Unit's GN Condensers fully charged. It is possible to extend the discharge time of the GN Particles and increase the travel range by concentrating the Avalanche Exia's supply of GN Particles to the verniers as well as lighten the Gundam by removing its armaments.The Avalanche Unit's GN Condensers are larger than regular ones and can be charged with more GN Particles. Unlike the regular GN Condensers that can display information about their status on the surface, the Avalanche Unit's GN Condensers are completely internalized and so their status are instead displayed on the Gundam's chest GN Condenser. As the Avalanche Unit's primary purpose is for high-speed movement, it does not come with additional weaponry. All the weapons of the normal Exia remain usable by the Avalanche Exia, but due to its higher speed, the Exia's characteristic seven swords have improved penetration and destructive power. To prevent the seven swords from being a hindrance during high-speed movements, they are all stored on the Avalanche Exia's upper body, with the majority mounted on a pair of weapon holders known as "Weapon Arms".The Avalanche Exia was seen relatively early during Celestial Being's armed interventions, and the Avalanche Unit's weight is kept below 5 tons as that was initially thought to be the maximum possible weight without negatively affecting the Gundam's balance. However, this assumption was later found to be wrong, and additional equipment is developed for the Avalanche Exia, resulting in the GN-001/hs-A01D Gundam Avalanche Exia', which is better adapted for operating in space. To prevent the Avalanche Unit from being a dead weight after use, its parts can be instantaneously purged from the Exia prior to the Gundam engaging in close combat.

The OZ-00MS Tallgeese Flügel is a variation of the OZ-00MS Tallgeese appearing in New Mobile Report Gundam Wing Endless Waltz: The Glory of Losers.The Tallgeese Flugel is a variant of the OZ-00MS Tallgeese created by Mike Howard, who has outfitted it for space use. The original back-mounted thruster units are replaced by four angelic wing binders lined with many thrusters, granting the Tallgeese great speed and manoeuvrability in space. The two larger wings can function as shields when positioned in front of the suit.

The RX-9/C Narrative Gundam C-Packs is a mobile suit appearing in Mobile Suit Gundam Narrative and is piloted by Jona Basta. The C-Packs was the third optional equipment for the RX-9 Narrative Gundam and is embellished with Psycho-Frame as additional armor. It is said that no such equipment plan originally existed for the MS, resulting in minimal conversions being hastily applied to the MS. Despite its unusual origin, the MS did achieve its concept to have an increased amount of Psycho-Frame, proving the high extensibility of the Narrative Gundam. This configuration of the MS is also called the "Psycho Package" and the Psycho-Frame used to create it was independently collected by Luio & Co.

The F91 Gundam F91 (F91 ガンダムF91 Effu Kujūichi Gandamu Fōmyura Nainti Wan?) is a mobile suit introduced in the movie Mobile Suit Gundam F91, in which it was piloted by Seabook Arno.[6][7] Harrison Madin piloted two production type units in custom colors. Based on F90V Gundam F90 VSBR Type, the F91 is a prototype machine created under SNRI’s ‘Formula Project’. The Formula Project, also known as F Project, is a miniaturized MS development program meant to address technological problems such as the upsizing and increasing cost of MS, and to rectify Anaheim Electronics’ monopolization of the MS industry. The F91 was developed to reached the ‘performance limit tidemark of present day MS’, and as such, its capabilities exceed that of contemporary machines. SNRI only referred to it by its model number, F91. It was later given the code name "Gundam F91" by Space Ark captain Leahlee Edaberry as its face resembled the Gundam’s.Befitting its smaller size, the Gundam F91 has a small reactor located in its enlarged backpack, surrounded by high-output thrusters. Despite its reduced size, the reactor has a high output, allowing the suit to drive multiple beam weapons including a beam rifle, two beam sabers, a beam launcher, a beam shield, and a pair of variable speed beam rifles (also known as VSBRs). While the first two beam weapons are common among contemporary mobile suits, the last three are of new designs. The beam launcher is a beam weapon equivalent of a projectile firing bazooka. The beam shield generates a highly defensive energy shield to block beam and projectile attacks. The VSBR is the Gundam F91’s most powerful weaponry, and is capable of firing beams of different speed to achieve either high destructive power or high penetrative power. Other weapons include two Vulcan guns and two mega machine cannons.With its reduced size and the increase in output, the Gundam F91 has a drastically improved power-to-weight ratio, allowing it to attain higher mobility than MS of earlier eras. Its mobility is on par with the miniaturized MS deployed later by the Crossbone Vanguard. It also has special features such as the Bio-Computer, MCA (Multiple Construction Armor) structure, and the MEPE (Metal Peel-off Effect) phenomenon. The Bio-Computer is installed in the suit’s head and feeds battle data directly to the pilot, but only a Newtype pilot can draw out its full potential. Accompanying the installment of the Bio-Computer, a head-mounted coolant and heat discharging system were also implemented, with the face guard opening to discharge heat under certain circumstance.The MCA structure incorporates electrical functions into the suit’s armor, allowing for more efficient use of the F91's limited internal space. The MEPE is a byproduct of the MCA structure. It helps the suit to dissipate excess heat by shedding the outer layers of its armor, and in the process, creates afterimages with mass to confuse enemy pilots, as well as the sensors of enemy machines. However, the MEPE is only activated under specific conditions.The Gundam F91’s high performance is not without drawbacks; its full operating mode is too much for normal pilots to handle. Thus, limiters were installed to make the suit more manageable; only a Newtype pilot can handle the full operating mode. When the Bio-Computer - via the Bio-Sensor in the pilot’s linear seat - determines that a Newtype is at the controls, it will disable the limiters and allow activation of the full operating mode. In this mode, the suit performs at its maximum potential and forced cooling is activated. This results in the suit radiating heat from all over its body: the face guard opens to vent heat, the shoulder-mounted heat radiations fins are deployed, the retractable thruster units on the back of the lower legs and the associated fins are activated, and the MEPE phenomenon occurs. All these are to reduce damage to the machine caused by movement overload during the full operating mode, and to protect the Bio-Computer that is sensitive to high heat. It is also worth noting that the front grill that takes up most of the chest and abdomen is a heat sink.After the war with the Crossbone Vanguard, an unspecified but extremely small numbers of Gundam F91s were manufactured. The MCA, MEPE, and full spec Bio-Computer were omitted from these production type units; inclusion of these technologies in the prototype unit was more for experimental purposes. Despite this, the catalog specifications of these machines are still comparable to the prototype’s. Although the face guard opening mechanism is retained in all production type units, only certain units for ace pilots (such as Harrison Madin’s) can access the full operating mode through improvements in the cooling system and various devices. However, these ace-used units still do not have the MEPE function due to the enhanced cooling system, as well as the change in the materials used in the final layer of armor.

The MSA-003 Nemo is a mobile suit introduced in the anime Mobile Suit Zeta Gundam. Its design was later updated for the light novel/OVA series Mobile Suit Gundam Unicorn. Based on the Earth Federation Forces's RMS-179 GM II, the MSA-003 Nemo is a mass-production general-purpose mobile suit developed by Anaheim Electronics for the AEUG. As Anaheim Electronics had bought over Zeonic Corps that worked for the Principality of Zeon, its mobile suit technology has Zeon influences and as a result, the Nemo has a mixture of both Zeonic and Federation technologies.Like most other mobile suits created during the Gryps War, the Nemo has an internal movable frame. Its movable frame is of a new design and reflects the data gained by Anaheim Electronics from the development of the RMS-099 Rick Dias and the MSN-00100 Hyaku Shiki. Thanks to this movable frame, the Nemo has high versatility and can operate in various environments such as zero-gravity, tropical regions, and cold climates. In addition, its legs' movable frame enables high mobility regardless of the environment, and as a result of considering Earth descent operations, it has a highly flexible structure with excellent drop and impact resistance. The Nemo's thrusters layout is designed using the RGM-79SP GM Sniper II's as a reference and this is due to part of the Nemo's development staff having worked on the latter during the One Year War.Compared to the GM II's titanium alloy ceramic composite, the Nemo has a more durable Gundarium alloy armor. As this armor is produced using the same technology as the RMS-108 Marasai's (another Anaheim Electronics' mobile suit, but provided to the Titans), it has high cost-effectiveness. Most of the Nemo's armaments are the same as those used by existing MS, and it could also use other armaments made by the Federation or Zeon. The Nemo was also relatively easy to pilot even for less skilled recruits, and overall, it was an excellent machine with performance superior to the GM II and RMS-106 Hizack.

The GAT-X105+P202QX Strike Gundam IWSP (aka Strike IWSP) is a prototype mobile suit introduced in Mobile Suit Gundam SEED MSV. The Integrated Weapons Striker Pack (IWSP) combines the primary characteristics of the Aile, Sword and Launcher Striker Packs, allowing the Strike Gundam to handle different combat situations with one set of equipment. It also grants mobile suit the ability to fly within the atmosphere. Although powerful, the IWSP is highly complex and difficult to use.The IWSP was originally developed by PMP Company, but was abandoned due to energy issue. Orb's Morgenroete Inc. later acquired one of the prototypes and solved the energy issue using their superior battery technology. As the Strike IWSP has no ranged beam weapon, it can be equipped with the standard beam rifle if necessary.After the war, the IWSP is revived by Actaeon Industries in the form of AQM/E-M1 IWSP, which is functionally identical to the earlier P202QX IWSP, despite some differences in appearance. Phantom Pain fit this IWSP pack onto their newly built Strike Gundam which has darker phase shift armor colors. Data obtained from this Strike Gundam IWSP was used in the development of Strike Gundam E, as well as the Noir, Jet and Doppelhorn striker packs.

The OZ-13MS Gundam Epyon is a mobile suit introduced in Mobile Suit Gundam Wing. Originally piloted by Heero Yuy, it was later given to Zechs Merquise. Based on data from the OZ-00MS Tallgeese and the other Gundams, the Gundam Epyon was created by Treize Khushrenada while he was placed under confinement by the Romefeller Foundation. In keeping with Treize's philosophy, the Epyon eschews cowardly long-range weapons in favor of chivalrous close combat. However, when the suit becomes a part of White Fang, a pair of Vulcan guns are added to the head.[1] Its main weapons are a segmented, whip-like heat rod mounted on a shield and a powerful beam sword whose energy is supplied by a direct connection to the Epyon's generator. Treize also installed a modified version of the Zero System known as Epyon System in the cockpit, making this suit a powerful opponent. The Epyon can also transform into a "mobile armor" mode for high-speed flight and cruising in space. It resembles a mythological dragon in this mode, however, its primary weapons are inaccessible save for the Epyon Claws which are also used as landing gear in this form.Gundam Epyon EW is Hajime Katoki's redesign of Epyon in a similar fashion to other EW version of the first five Gundams and included in New Mobile Report Gundam Wing: Frozen Teardrop as well as Mobile Suit Gundam Wing Endless Waltz: Glory of the Losers. It is later given additional equipment known as 'Sturm Und Drang' that can be used for both defense and offense.

The GN-0000+GNR-010 00 Raiser (aka 00 Raiser) is the combined form of GN-0000 00 Gundam and GNR-010 0 Raiser in season 2 of Mobile Suit Gundam 00. Setsuna F. Seiei pilots the 00 Gundam and Saji Crossroad pilots the 0 Raiser, however, when combined Setsuna can operate both units himself. Despite its power, the GN-0000 00 Gundam is a highly experimental unit that suffers from power instability issues and so requires constant maintenance and fine-tuning. The Twin Drive System was also a very new technology, requiring the external stabilizing equipment on 00's main support unit, the GNR-010 0 Raiser, to safely execute Trans-Am and fully synchronize the GN Drives. Some data from GN-XXX+GNR-000 Sefer Rasiel was also exploited in its development.When combining is needed, laser guidance sensors would mutually lock onto each other, with a Haro auto-configuring the docking sequence. 0 Raiser's binders detach from the 0 Raiser body and latch onto 00's GN Drives, and its main body combines with the 00 Gundam's backpack, resulting in an angelic-like form. After successful docking, 00 Gundam's system screen(s) reflect the changes to the frame and the Twin Drive's stabilization. Each of 0 Raiser's binders can be mounted with a GN Shield to increase it's defensive capabilities, this form can remain the same even when docked onto 00 Gundam's GN Drive housing units. Without the GN Shields attached, the binders also act as shields themselves, capable of blocking beam shots from GNZ-003 Gadessa's GN Mega Launcher in Trans-Am mode.As the 00 Raiser the Twin Drive reaches 100% synchronization rate, it can achieve GN Particle generation rates far exceeding 300% during Trans-Am(700% during the first dock), and also gains the usage of the Raiser System. These feats allow 00 Raiser to fully harness its massive particle production (too much for the 00's frame to properly handle alone) and perform at peak capacity. While in Trans-Am, 00 Raiser has also been seen utilizing quantum teleportation in a few battles although the specific activation and control mechanism has not been elaborated upon.The Raiser System allows the 00 Raiser to execute powerful attacks such as a massive GN Beam Saber dubbed the "Raiser Sword", allowing for greater close combat abilities, and using Trans-Am mode with even greater power and duration. Originally requiring both of its GN Swords working with the 0 Raiser's binders to produce and control the Raiser Sword, the 00 was later equipped with a GN Sword III. This weapon was capable of harnessing the power of the Raiser System to generate a refined, more controllable version of the Raiser Sword.The power of 00 Raiser is further enhanced with the presence of an Innovator pilot. Once such a being is detected the Twin Drive can execute Trans-Am Burst, a massive flood of purified GN Particles across a massive area. With the Twin Drive's full abilities in constant demand to combat the A-Laws and Innovators, 00 Raiser became the mainstay unit to effectively combat opposing MS. Overall, 00 Raiser is a mobile suit that exceeds the performance of all others, surpassing the very concept of "Gundam".

The XXXG-01D Gundam Deathscythe (aka Deathscythe, Gundam Zero-Two or Deathscythe Ver.Ka.) is the second of five Gundams sent to Earth from the Space Colonies in the manga New Mobile Report Gundam Wing Endless Waltz: The Glory of Losers. It was piloted by Duo Maxwell. The Gundam Deathscythe was the "masterpiece" of Professor G. It has outstanding stealth capabilities, with a pair of Hyper Jammers mounted on its backpack that prevented the Gundam from showing up on radar or visual sensors, rendering it invisible to most electronics. This allowed it to sneak into facilities and even right up to enemy mobile suits without being detected. With the highest speed amongst the original 5 Gundams, the Gundam Deathscythe's battle style revolves around approaching the enemy rapidly, striking and then retreating.The Deathscythe's primary weapon was its namesake beam scythe. The power and reach of the scythe enabled it to destroy most single (and sometimes multiple) targets in one sweep. The Deathscythe also carries a Buster Shield on its left arm, which doubled as launchable scissor katar. Rounding out its arsenal was a set of head-mounted vulcan guns.The suddenness with which this sinister looking Gundam arrive, its invisibility on sensors, and the speed and ferocity of its attacks all strike great fear in its enemies, befitting its grim reaper visage.

The RX-0 Unicorn Gundam (ユニコーン ガンダム Yunikōn Gandamu?, or Unicorn, Unicorn Gundam 01, Singularity One) is the titular prototype mobile suit of the Mobile Suit Gundam Unicorn novel, its OVA adaptation and the television re-cut. Developed by Anaheim Electronics for the Earth Federation, it concealed a secret that could shake the future of all humanity, for it was the key to opening Laplace's Box. It is piloted by Banagher Links after the head of the Vist Foundation and his father, Cardeas Vist, entrusted it to him at the dawn of the Third Neo Zeon War in U.C. 0096.Produced as the final part of the E.F.S.F's reorganization plan, the "UC Project", the Unicorn Gundam is a revolutionary design meant to be the main symbol of the project's main goal: to destroy any traces of Zeonism in the Earth Sphere. Thus, not only does it feature a Gundam design, but it also incorporates an anti-Newtype system. Two prototype machines were completed at Anaheim Electronics' factory in Granada. However, when the Vist Foundation took control of the project, they installed a special "La+ Program" OS into the Gundam, turning it into a symbol of possibility by making it the key to finding Laplace's Box: the embodied hope of the Universal Century. Featuring the most advanced mobile suit technology of the time, its performance is unmatched.Incorporating test data from the experimental MSN-06S Sinanju Stein, the Unicorn Gundam's entire frame is built with Psycho-Frame material, drastically increasing the unit's responsiveness and allowing it to be piloted like an extension of the pilot's body. While mobile suits used during the Second Neo Zeon War implemented psycho-frame technology on a limited basis, the Unicorn is the first "full psycho-frame" mobile suit. In some cases, this responsiveness is so high that the machine appears to act on its own without any actions from the pilot. In addition, the Unicorn utilizes a special system known as the "NT-D" (or Newtype Destroyer) which activates the suit's psycho-frame and dramatically increases the suit's performance.In its normal form, the "Unicorn Mode", the Unicorn Gundam's head is similar in appearance to those of Londo Bell's mass-produced mobile suits, with the addition of a single, horn-like antenna on its forehead (which gives it the name "Unicorn"). Destroy Mode is the form when Unicorn Gundam's NT-D System is activated. The transformation is marked by an expansion of the suit's frame. The armor seams separate and lock down into various hard-points, while the newly exposed psycho-frame emits a pinkish-red or greenish (Awakened) glow (attributed to the Psycho-Field phenomenon). In this mode, the Unicorn becomes taller, reveal six more thrusters, and its head transforms to one with standard Gundam features, the visor and face guard retracts into the head to reveal the twin eyes and mouth plate, and the antenna splitting into a V-fin. To prevent its transformation being interrupted, the strength of its I-Field will be increased temporarily. Additionally, a pair of sub-sensors are revealed on the shoulders, and two concealed beam sabers extend out of the backpack.In Destroy Mode, the suit's psycho-frame scans the pilot's thoughts and directly transmits them to the suit's drive system; in other words, the Unicorn can be controlled by the pilot's thoughts alone. Additionally, the mode also causes the machine's performance - in thrust, generator output, and sensory radius - to be increased to unmeasurable levels. The NT-D also allows the Unicorn to take control of an enemy's psycommu weapons (also known as "Psycommu Jack") by emitting a Psycho-Field. However, the stress placed on the mind by manipulating an object more than tenfold the size of an average human is extraordinary. Even with the aid of the psycho-frame, the pilot's mind can only endure roughly five minutes of operation before a limiter is activated, deactivating the psycho-frame and returning the mobile suit to its Unicorn Mode.With the performance limiters disengaged, the Unicorn can accelerate up to 20 G's in Destroy Mode; to alleviate such high levels of G forces placed on the pilot, a drug administration system called the "DDS" is fitted on the pilot suit. It suppresses stagnated blood circulation due to high acceleration by administering the drug to the pilot. Furthermore, the DDS activates automatically upon the detection of another Newtype via the "Intention Automatic System".

The MBF-P03D Gundam Astray Blue Frame D is a variant of the Gundam Astray Blue Frame Second L/G in the novel Mobile Suit Gundam SEED Destiny Astray B. It is piloted by Gai Murakumo. Produced in the Ame-no-Mihashira's factory by Gai, the Gundam Astray Blue Frame D is a close combat unit created to battle Dante Gordigiani's MBF-P0X Gundam Astray Noir. Although it is a variant of the Blue Frame Second L and Astray Blue Frame Second G, the Gundam Astray Blue Frame D swaps out most of their parts for parts of the original Blue Frame. Newly designed parts are also fitted in some areas and a striker pack connector has been added to the suit's back so that it can mount the Vouivre Striker, a modified AQM/E-X01 Aile Striker. The suit is armed with 10 blades and gives the impression that it is designed to get close to the enemy using the powerful output from the Vouivre Striker and then engaged in close combat. However, these blades are actually DRAGOONs with unique abilities and most of them can also be used as handheld weaponry. Gai later upgrades the suit with a pair of blade guns that are mounted underneath the arms.