Gundam Gunpla

XM-X1 Crossbone Gundam X-1 is a testbed mobile suit developed by the Earth Federation's Strategic Naval Research Institute (SNRI). It was featured in the Mobile Suit Crossbone Gundam manga series.The F97 is specifically designed by the SNRI to be used near Jupiter, where the strong gravitational field creates serious propulsion problems. Units operating on Earth and near Earth's orbit usually achieve high mobility using thrusters distributed across the mobile suit's body. However, under Jupiter's gravitational influence, this would require enlargement of the thrusters, leading to an increase in the mobile suit's size and mass. Larger thrusters would require more powerful reactors, which in turn adds more mass.To resolve this, the F97 is equipped with a set of four movable thrusters in an X-shaped array. Used in tandem with the unit's AMBAC system, these thrusters allow high mobility around Jupiter's orbit without increasing the size and mass of the mobile suit – and when combined into one huge thruster column, they are capable of dramatically increasing the unit's top speed. Of course, there are tradeoffs; a unit designed for these unique conditions like the F97 is difficult to control on or near Earth.Though technically the F97 are general purpose mobile suits, they were designed with extra emphasis on their close range combat abilities. With their high mobility, they easily outmaneuver most enemy mobile suits, allowing them to slip into close range and past the beam shield. Additionally, the Crossbone Vanguard leader, Berah Ronah, sought to fight the war against the Jupiter Empire with as little loss of life as possible. With blades it is easier to take out a mobile suit without destroying the cockpit than it is with a beam rifle.Another notable equipment is the Anti-Beam Coating cloak, which can be stored on the F97's back and unfolded when needed. When unfolded, it covers the mobile suit's entire body, and disperses beam energy over the cloak. It can usually withstand five standard beam shots without spending any energy, with the additional advantage of stealth. Like its predecessor F91 Gundam F91, its "mouth" can be opened as a vent. The F97 is also equipped with a plug-in type core fighter, which mounts the movable thrusters and two standard beam sabers.Four units were made in total and given by SNRI to the Crossbone Vanguard. In order to cover this secret dealing, they were assigned the codes X-0, XM-X1, XM-X2, and XM-X3 and given the name Crossbone Gundam.

The MSΖ-006 Zeta Gundam (MSΖ-006 Ζゼータ ガンダム?) is the titular mobile suit of the Mobile Suit Zeta Gundam television series and also featured in the Mobile Suit Gundam ZZ television series. It was piloted by one of its designers, Kamille Bidan, during the Gryps Conflict , and then Judau Ashta in the First Neo Zeon War.The Zeta Gundam is a high-performance, next-generation MS constructed by Anaheim Electronics in partnership with the AEUG as part of the "Project Zeta". This project aimed to develop a transformable mobile suit capable of operating in space and on earth, but it stagnated due to problems with the strength of the movable frame. Progress was later made when Anaheim Electronics studied the movable frame of the RX-178 Gundam Mk-II units stolen by AEUG from the Titans.The main feature of the Zeta Gundam is its ability to instantly transform into a streamlined Waverider mode, which can fly at high speed in space as well as in the atmosphere. The Zeta Gundam can also function as a sub-flight system in this mode, carrying another mobile suit on its top surface. Furthermore, this mode also allows the Zeta Gundam to ride the shockwaves of atmospheric re-entry, thus it can enter the atmosphere without the use of the Ballute System, a bowl-shaped balloon parachute that protects a mobile suit from the friction heat of atmospheric entry. This atmospheric re-entry capability is thanks to the incorporation of the Flying Armor into the mobile suit's back (bottom in waverider mode), which is developed using the data of the Gundam Mk-II's FXA-00 Flying Armor.The Zeta Gundam is armored with the new lightweight Gundarium Gamma alloy, and has a variety of weaponry that includes two head-mounted vulcan guns, two beam sabers stored in the side armor that function as beam guns in Waverider mode, two forearm-mounted grenade launchers, a beam rifle with retractable barrel, and a shield. When higher firepower is required, it can use the powerful hyper mega launcher. The Zeta Gundam is also one of the first mobile suit to use the Bio-Sensor, a variant of the Psycommu system that allows a Newtype pilot to more easily interface with his mobile suit via mental commands.The Zeta Gundam is said to have received various upgrades from its initial model, such as the Initial Model + Wave Shooter, mid-model (major upgrade done in December UC 0087, most notable change being the rear skirt thrusters and addition of forearm grenade hatches) and the late model (final upgrade made in March UC 0088 consisting of Zeta Plus parts).

The GN-001 Gundam Exia (aka Exia, Gundam Seven Swords) is a mobile suit featured in season one of Mobile Suit Gundam 00 and is piloted by Setsuna F. Seiei. Specializing in close combat and armed mainly with melee weapons, the Gundam Exia is one of four Gundams deployed in AD 2307 by the paramilitary organization, Celestial Being, to eliminate world conflicts through armed interventions. To fight against the world with their small numbers and win, these Gundams have overwhelming power and equipped with advanced technology a century ahead of its time. Notably, the semi-perpetual GN Drive mounted in the center of the Gundams provide almost limitless energy and generates special, multifunctional GN Particles. The GN Particles grant outstanding mobility, including independent flight capabilities, and are also utilized for beam weaponry, attitude control, and stealth purposes as the discharged particles can cause electromagnetic interference, leaving conventional communication and radar devices useless. The Gundams also share common aspects with conventional mobile suits, such as the use of E-Carbon for its armor material. However, the Gundams' E-Carbon has higher defensive power due to the use of advanced materials.An example of Exia's overwhelming power is that its output was estimated to be about six times that of the SVMS-01 Union Flag, one of the newest conventional mobile suits at the time. The technical hurdles that had to be overcome to create the powerful Gundams and their GN Drives were high, making their production extremely difficult and caused the Gundams' development to occur in phases. The first generation machine, the GN-000 0 Gundam, established the basic system of a mobile suit powered by a GN Drive, and armed with a beam gun and beam saber. Subsequently, four second generation machines were developed with individual capabilities required for armed intervention, and their data served as a basis for the third generation machines, which included Exia and the other three Gundams deployed in the armed interventions. Specifically, Exia was developed from the GNY-001 Gundam Astraea, a general-purpose mobile suit with human-like movability that was used for testing various weapons, and the two machines have a number of similarities in terms of appearance.The Astraea's movability aspect is particularly appropriate for the Exia, which requires the same range of articulations as the human body due to its close combat specialization. Thus, while the Exia is armed mainly with melee weapons, its basic performance remains that of a general-purpose mobile suit. In fact, Exia is the only Gundam deployed for the armed intervention that has a body structure capable of range of articulations like the human body's, and the omission of such a structure in the other three Gundams is simply because they do not require it as their specialization is in other areas. To achieve its wide range of articulations, Exia has the most complex basic frame out of the four Gundams, its armor is also more minutely segmentalized as well. This armor design however causes some internal structures and the joints to be unprotected during certain poses, lowering Exia's defensive capability. On the other hand, this design does provides better mobility, giving Exia the best projectile evasion capability among the four Gundams.The Exia also has finer attitude control capabilities than the other Gundams, which is beneficial for close combat, and this is related to its GN Cables. The GN Cables, also known as “GN Power Lines”, are the light purple-colored cables running through various parts of the Exia's body and also one of its eye-catching visual features. While these cables are also found on other Gundams, the ones extending from the shoulders to the upper arms are unique to Exia. The cables facilitate the supply of tremendous amount of GN Particles, and thus energy, to each part of the Gundam instantaneously. They are also used for attitude control due to the GN Particles' mass reduction effect, and so, the Exia which has more cables on its exterior than the other Gundams is able to achieve finer control. In terms of defense however, such placements are dangerous, and later in GN-001REII Gundam Exia Repair II, the cables become mostly stowed in the armor.The GN Particles' mass reduction effect also lightens the Gundam, and can be used to alter the mass ratio of various body parts. Due to this latter ability, it is possible to freely control the machine's inertia and turning capabilities when in the air, and for Active Mass Balance Auto-Control (AMBAC) when in space. This also eliminates the need for the legs to "walk” when moving. As for the control of GN Particles, it is largely carried out by the two clavicle antennas on the Gundam's torso. A minor role is played by the third generation Gundams' head antenna, which is experimentally equipped with particle control functions. The head antenna also has communications and radar search functions, as well as the black box for quantum communication linkage with Veda (the Celestial Being's quantum computing system). The rest of the Gundams' humanoid head unit also contain systems responsible for controlling the entire body, much like a human's head. On a side note, the Exia's head is designed to look like the helmet of the pilot suit worn by the Gundam Meisters in AD 2307-2308 to express the belief of “Meister = Gundam”.While the GN Drive can produce GN Particles endlessly, even when the Gundams are inactive, there is a limit to the amount that could be instantaneously produced. Thus, continuous or heavy usage of beam weapons and other GN Particles consuming systems might cause the Gundams to run out of particles. To avoid this, the Gundams have GN Condensers in various body parts to store excess GN Particles. For maintenance purposes, the condensers can display the particles' compression rate and the amount stored. During mission, this display function is used for transmitting coded messages to allied units. On the matter of GN Drives, Celestial Being only created five units as that was deemed to be the minimum needed for armed interventions. The low number is not only due to difficulties in manufacturing the GN Drive, which requires Jupiter's high gravity environment, but also because having more GN Drives would increase the risk of them falling into the enemy's hands.The Gundam Exia is nicknamed “Gundam Seven Swords” as its development code was “Seven Swords”, and as indicated by this name, it is equipped with a total of seven blades to meet the needs of the moment during combat. Of these seven, the GN Sword, GN Long Blade, GN Short Blade are physical blades, while the rest are beam-based and consisted of two GN Beam Sabers and two GN Beam Daggers. The GN Sword serves as the primary weapon and due to its low energy consumption, the Exia has an advantage in prolonged combat, which mainly occurs when fighting ace pilots or when subjected to traps such as the three major bloc's joint military exercise. The three physical blades also serve as countermeasures against GN Field, a protective barrier made of GN Particles. In other words, Exia is also intended to fight against Gundam/GN Drive-equipped machine that is piloted by a betrayer or captured by the enemy and used against Celestial Being. Early on, an alternate configuration of the GN-005 Gundam Virtue also had an anti-betrayer role, but its design was dropped and this increased the responsibilities placed on Exia and its Gundam Meister.Other armaments include a GN Shield for defense that also provides protection to the internal structures and joints that might be exposed during movements. The GN Shield is usually in a compact size to maintain Exia's range of articulations, but can expand to increase the defensive area when needed. Similarly, the GN Sword, can fold its blade and has a Rifle Mode for ranged combat. The last of Exia's armament is another ranged weapon in the form of a pair of low-power GN Vulcans mounted in the forearms. During battles, the Exia gloriously sliced through its opponents in close combat, leaving a powerful impression on those who witnessed it and contributing greatly to the instillment of a "fear of Gundams" in the world. This was already anticipated by Celestial Being, and it is because of this that the organization's tactical forecaster, Sumeragi Lee Noriega, selected the Exia to intervene in the AEU-09 AEU Enact's presentation ceremony, which became the unveiling of the paramilitary organization.The Gundam Exia has an "Over Boost Mode" that temporarily boosts its GN Drive's performance and thus increase the mobile suit's capabilities. During an emergency, the Exia can activate a special "Trans-Am System" that enhances its thrust and defensive capabilities, as well as increase its output to three times that of its normal specifications for a limited period of time. This system also causes the Gundam to glow red, but it is a double-edged sword as Exia's performance will drop dramatically once it ends. A number of additional optional equipment was also developed for Exia, such as the high mobility Avalanche Unit and the GNR-001E GN Arms Type-E support machine. When equipped with the Avalanche Unit, the Exia becomes the GN-001/hs-A01 Gundam Avalanche Exia and can speed past specialized high-speed mobile suits, which it normally cannot do despite having remarkable mobility. When docked with the GN Arms Type-E, the Exia becomes the GN-001+GNR-001E GN Armor Type-E, obtaining better mobility, offensive and defensive capabilities.

The RX-93 ν Gundam (aka Nu Gundam, Nu) is a mobile suit that appears in Mobile Suit Gundam: Char's Counterattack. It was designed and piloted by Amuro Ray. The ν Gundam is one of the most advanced mobile suits during the Second Neo Zeon War in U.C. 0093, together with Char Aznable's MSN-04 Sazabi, it is used by Amuro Ray who also came up with its basic design. It was manufactured at Anaheim Electronics' Von Braun plant and completed in a short period of time (about three months) under the supervision of chief engineer October Saran. Its design is based on the average specification values of each successive generations of Gundam-type units from the original RX-78-2 Gundam to the MSZ-010 ΖΖ Gundam, and updated with state-of-the-art technologies introduced at the time. Various test data collected from the ARX-014P Silver Bullet (Funnel Test Type), the YRA-90A μ Gundam and the RX-9 Narrative Gundam were also used in its development.The ν Gundam's design focuses on versatility and operational aspects, as well as emphasis on reliability and durability for protracted battles. It adopts unitized parts that are designed according to EFF standards, except for the Psycho-Frame, for easier procurement of parts and materials and reducing special components as much as possible. It can be easily repaired due to maintenance feedback and combat data. In addition, it reflects Amuro Ray's experience as an MS pilot cultivated over the years.Incorporating the Psycho-Frame technology secretly provided to Anaheim Electronics by Char Aznable of Neo Zeon, the ν Gundam was able to utilize Psycommu weapons and channel the emotions and mental energies of a Newtype pilot. It is also the first Gundam-type machine to be equipped with Funnels, and a newly developed MS control program is installed to account for the ν Gundam's center of mass during the separation and movement of the Funnels. Despite its short development time, the ν Gundam proved itself to be a formidable mobile suit and when combined with legendary ace pilot Amuro Ray's immense skill and experience, this powerful, state-of-the-art machine was able to almost single-handedly hold back the whole Neo Zeon force, and its Psycho-Frame was put to the test to determine the history of humanity living on earth.

The MSN-04 Sazabi is a mobile suit introduced in Mobile Suit Gundam: Char's Counterattack. It is piloted by Char Aznable. After Char Aznable returned as the leader of his own Neo Zeon faction in U.C. 0093, he ordered his engineers to create a new mobile suit which would fit his piloting skills and Newtype powers. The result was the MSN-04 Sazabi, which was later built by the Luna-based contractor Anaheim Electronics [1][2]. With an overall height of 25.6 meters, the Sazabi is much bigger than most standard mobile suits, but thanks to the use of lightweight armor materials and a great number of thrusters [3] it is much faster and maneuverable than other suits. The suit is armed with an abdomen-mounted scattering mega particle cannon, a beam shot rifle, a pair of beam sabers stored in the arms and a shield with three missiles as well as a beam tomahawk.Because Char is a Newtype, the Sazabi was also equipped with six funnels which the pilot could control through his psycowaves via a Psycommu system. The Sazabi was also the first MS to be equipped with the revolutionary new psycoframe cockpit. This system featured microscopic psycommu receiver circuits installed throughout a mobile suit's internal frame and cockpit walls. These tiny circuits amplify and transmit a Newtype pilot's psycowaves, enabling the mobile suit to respond instantaneously to mental commands.

The GAT-X105+AQM/E-X01 Aile Strike is a prototype high mobility mobile suit introduced in Mobile Suit Gundam SEED. Its primary pilot was Kira Yamato before it was passed down to ace pilot Mu La Flaga. The AQM/E-X01 Aile Striker is the most commonly equipped Striker pack for the Strike as it provides the greatest versatility. Thanks to the powerful vernier thrusters built into the Aile Striker, the Strike Gundam becomes an all purpose combat mobile suit with enhanced speed and maneuverability compared to its base capabilities.Despite the strength of the thrusters, they do not perform well enough for true flight capabilities inside Earth's atmosphere. However, they do allow the Strike to glide in the air for a short time and enhance its jumping capabilities to the point that it can combat mobile suits on Guuls that are flying low. Besides the standard armament of the GAT-X105 Strike Gundam, the Aile Striker pack adds a pair of beam sabers to the suit's armament.

The SD EX-Standard Wing Gundam Zero EW from Gundam Wing: Endless Waltz is a Super Deformed (SD) model kit that offers a compact and stylized rendition of the iconic mobile suit. This model kit includes: Key Features: Scale and Materials: SD scale model crafted from high-quality plastic, ensuring durability and ease of assembly. Articulation: Despite its SD design, it features enhanced articulation, allowing for dynamic poses, including the iconic Twin Buster Rifle firing stance. Accessories: Equipped with the Twin Buster Rifle, which can separate into two individual rifles, and a beam saber for versatile display options. Design Details: Showcases the distinctive wing units, which can be adjusted for various poses, and is molded in color with foil stickers for added detailing. Release Information: Released in 2015 as part of Bandai's SD EX-Standard line, this kit combines the charm of SD proportions with the intricate design elements of the Wing Gundam Zero EW, making it a delightful addition to any Gunpla collection. The SD EX-Standard Wing Gundam Zero EW is ideal for both beginners and seasoned builders, offering a fun and straightforward assembly process, along with the opportunity to recreate one of the most beloved mobile suits in a unique, stylized form.

The RX-78-02 Gundam (RX-78-02 ガンダム?) is the titular mobile suit of the Mobile Suit Gundam: The Origin manga. It also appears briefly in the Mobile Suit Gundam: The Origin OVA and the Mobile Suit Gundam: The Origin Advent of the Red Comet television series, and again in the Mobile Suit Gundam: Cucuruz Doan's Island movie. It was piloted by Amuro Ray during the One Year War. Its estimate generator output was from 1000kW to 1400kW, its target output was to be at least 150% of the RCX-76.The operation tests of the RX-78-02, a prototype MS of the Earth Federation, were carried out in secret, but civilian Amuro Ray coincidentally became its pilot when Zeon Forces assaulted Side 7.The RX-78-02 utilizes its wide array of portable weapons such as its beam rifle and hyper bazooka. It also has fixed weaponry such as two shoulder magnums on the left shoulder, a gatling gun on the right shoulder, and a forearm gatling gun on its left arm. It's also possible to swap a beam saber with an optional armament known as the shoulder cannon.Furthermore its unable to transform its Beam Sabers to Beam Javelins, its Gundam Hammer doesn't exist, nor does it use the Core Block System until it was upgraded to have one at Jaburo.As the war progressed to its latter stages, the RX-78-02 was reconfigured into its Late Type/Middle Type form. When the fighting was moved into space a majority of its fixed weapons were removed and swapped with extra thrusters for better mobility and gate shaped armor on the shoulders. Several fixed weapons were removed such as the arm vulcan, the two shoulder magnums, shoulder Gatling gun, and the shoulder cannon not being used more often.

Introducing the PG 1/60 Perfect Grade Unleashed RX-78-2 Gundam, a pinnacle of Gunpla engineering that celebrates over four decades of Gundam excellence. This model kit offers an unparalleled building experience, meticulously designed to replicate the iconic RX-78-2 Gundam with exceptional detail and articulation. Key Features: Scale and Detail: At 1/60 scale, this model stands as a testament to precision, featuring intricate internal structures and external armor that mirror the original design. Advanced Articulation: Boasting over 90 points of articulation, including functional pistons and sliding mechanisms, it allows for dynamic and realistic poses. Multi-Material Construction: The kit incorporates diverse materials such as aluminum parts for the head vulcans and backpack verniers, metallic 3D stickers, and photo-etched parts, enhancing both durability and aesthetic appeal. LED Lighting System: Equipped with color-changing LEDs in the head and chest, as well as an LED beam saber, it brings the Gundam to life with various states of combat or maintenance. Note: Requires LR41 batteries (sold separately). Innovative Assembly Process: Designed to emulate the construction of a real robot, the assembly progresses from the internal skeletal frame to the external armor, providing a comprehensive and immersive building experience. Box Contents: RX-78-2 Gundam model parts Shield Two beam sabers Beam rifle LED components Sayla Mass figure Three Amuro Ray figures Magnet set Aluminum parts Stickers Metallic stickers Comprehensive instruction manual This Perfect Grade Unleashed kit is a must-have for both seasoned builders and newcomers, offering a challenging yet rewarding project that culminates in a stunning display piece. Elevate your Gunpla collection with this exceptional model that embodies the spirit and innovation of the Gundam universe.

GN-0000+GNR-010/XN 00 XN Raiser (aka 00 XN Raiser, pronounced Double-Oh Sun Raiser), is the combination of the GN-0000 00 Gundam and the GNR-010/XN XN Raiser. It appears in the Mobile Suit Gundam 00V side story. 00 XN Raiser carries a pair of GN Buster Sword IIIs that can combine into one large sword. The additional pair of manipulator arms on the XN Raiser allows the 00 XN Raiser to carry more weapons, as well as grant it another pair of arms for combat use. XN Raiser's binders do not dock into the 00 Gundam's twin GN Drives; instead, they fold up when the XN Raiser is docked onto the 00 Gundam. The entire system docks onto the 00 Gundam's back as a weapons backpack.

Hello Kitty/MS-06S Char's Zaku II [SD Gundam Cross Silhouette] "Mobile Suit Gundam", Bandai SpiritsSecond round of GUNPLA's collaboration with Hello Kitty!

The MSN-02 Zeong (ジオング Jiongu) is a prototype mobile suit appearing in the anime Mobile Suit Gundam. It was first piloted by the "Red Comet" Char Aznable. Developed by the Principality of Zeon at the A Baoa Qu space fortress during the One Year War, the Zeong was built exclusively for Newtype pilots. It initially had the model number "MS-16X" and was developed based on the data of multiple experimental units. The Zeong was also the first mobile suit to use the Psycommu system, which allowed a Newtype pilot to utilize its wire-guided remote-controlled forearms for all-range attack effectively. Each forearm was built with five mega particle cannons in its fingers. The Zeong also has three more mega particle cannons on its body, two in the waist and one in the head.The Zeong was expected to be around 35m tall when fully completed, making it much larger than most mobile suits of the time. Its large size was attributed to the difficulties in miniaturizing the Psycommu system. Though another account suggested that it was due to the need for larger generators to power its thirteen mega particle cannons. In the end, this mobile suit was only 80% complete when it was deployed, thus its lack of legs and exposed upper arms. Although the legs would aid in the AMBAC System, their omission did not hinder the Zeong from performing at 100% combat capacity, since two rocket thrusters were installed at where the legs were supposed to be.Although the Zeong was developed for Newtypes, it could also be operated by normal pilots. In this situation, the mobile suit would be controlled by a pilot in the torso cockpit and a gunner in the head cockpit. The two cockpits were connected by a traversal tube. In contrast, a single Newtype pilot could fully operate the Zeong from either one of the cockpits, though due to the mobile suit's prototype nature, its activation and initialization could only be done in the torso cockpit. In order to ensure the recovery of its data and pilot, especially if the pilot was a Newtype, the head also doubled as an escape pod and could detach from the main body when necessary.

The XXXG-01W Wing Gundam (aka Gundam 01, Wing Gundam [Early Type] or Wing Gundam [Ver.Ka.]) is the titular mobile suit of the manga Mobile Suit Gundam Wing Endless Waltz: Glory of the Losers. It was primarily piloted by Heero Yuy. Out of the five original Gundams created for Operation Meteor, Wing Gundam is the most well-balanced in terms of abilities and bears the closest resemblance to their common ancestor: the XXXG-00W0 Wing Gundam Proto Zero. Like its predecessor, the Wing Gundam can transform into an alternate flight form known as "Bird Mode" and has a powerful Buster Rifle as part of its armaments. However, the "ZERO System" interface (which had technical problems) and other parts considered to be excessive were not included, and the skills of the pilot are needed to make up for the shortfall.The major contributor to Wing's mobility is the pair of wing units on the backpack. These units not only generate lift, but can also change the aerodynamic characteristics of the mobile suit through the movements of their individual panels, supporting a range of speeds from stall to hypersonic. Even in outer space, the wing units exhibit high attitude control capability using both AMBAC and built-in vernier thrusters. By transforming into Bird Mode, Wing Gundam's mobility and movement range are increased further, allowing it to conduct operations that other Gundams could not.

The RX-78-2 Gundam is the titular mobile suit of Mobile Suit Gundam television series. Part of the RX-78 Gundam series, it was built in secret on Side 7. The Gundam would turn the tide of war in favor of the Earth Federation during the One Year War against the Principality of Zeon. It was primarily piloted by Amuro Ray. The Gundam was incredibly advanced for its time. Built from lightweight Luna Titanium Alloy, its frame was both lighter than that of Zeon's mass-produced mobile suits and much sturdier, able to shrug off a MS-06 Zaku II's machine gun fire with little to no damage. Its offensive power was above and beyond that of the Zakus. The Gundam would engage in most battles with its beam rifle, making it the first mobile suit to have firepower equivalent to a battleship's beam cannons. In addition, it made use of two beam sabers, blades of extremely hot plasma which could cut through any metal with ease. Those beam sabers could be extended into a spear-like beam javelin, which could be used to stab into an enemy from a longer distance.The Gundam also used more conventional weaponry; it could launch rockets with a "Hyper Bazooka", the Federation's answer to the bazookas used by Zeon's Zakus; in addition, its head was outfitted with a pair of small vulcan guns, as a way of attacking light-armored aircraft and vehicles without wasting ammo or energy from its more powerful armaments. It also made use of a very unconventional close-range weapon known as the "Gundam Hammer" - a large weapon similar to a flail which could be swung at enemies to deal crushing damage. The Gundam Hammer was eventually upgraded for use in space and outfitted with a number of verniers on the ball, and renamed to be the "Hyper Hammer". Lastly, it wielded a shield which would offer it a defense against enemy attacks that not even its Luna Titanium body could withstand without damage. Gundam pilot, Amuro Ray, would make use of the shield as a decoy in many battles, taking advantage of its size to fool the enemy into thinking he was charging at them, then attacking the enemy through the shield.In terms of technology, the Gundam was equipped with a sophisticated Learning Computer which would collect pilot and enemy data during skirmishes and allow the Gundam to operate more effectively. The data from the computer was used by the Federation to improve the controls of the Gundam's mass-produced form, the RGM-79 GM. In addition, it was upgraded by Federation technician Mosque Han shortly before the Battle of A Baoa Qu to improve its reaction times, the joints of the Gundam were given a Magnet Coating, based on the experimental procedure performed on the RX-78-3 "G-3" Gundam and later used on Amuro's intended successor unit, the RX-78NT-1 Gundam "Alex".The Gundam makes use of the Core Block System implemented in the other V Project units. The torso of the Gundam is mostly hollow so that a FF-X7 Core Fighter can dock with it. This allows the pilot to jettison the legs and torso of the Gundam should the machine be too heavily damaged and gives the pilot a chance to escape from battle. Later, during Operation Odessa, the Gundam is given a support unit known as the G-Fighter. The two G-Fighters were designed to take advantage of the Gundam's modular system and diversify the Gundam's role in active combat. These modes ranged from the assault bomber G-Armor to the close combat support tank G-Bull. Officially, it is called a prototype, but it is also said to be more of a custom-made machine that is finished with high quality materials and the best technology.

The RGM-89De Jegan [ECOAS Type] (aka Jegan "Four Eyes") is a special operations mobile suit based on the RGM-89D Jegan for use by ECOAS. It first appeared in the OVA series Mobile Suit Gundam Unicorn. The RGM-89De Jegan [ECOAS Type] is a special version of the RGM-89D Jegan D Type used by the Earth Federation's special task group ECOAS, and are deployed in ECOAS missions that are expected to involve direct combat with mobile suits. It has a special visor and extra chest armor for increased survivability. The ECOAS Type features the same armaments as the normal Jegan, consisting of a beam saber, a beam rifle, a three slot hand grenade rack, and a shield that has two two-tube missile launchers built in. It could also be outfitted with a bazooka for increased firepower and custom units with different weaponry also exist.

The ZGMF-X10A Freedom Gundam (aka Freedom, X10A) is a mobile suit introduced in the anime Mobile Suit Gundam SEED and is piloted by Kira Yamato. One of ZAFT's ZGMF-X series of Gundam units build in C.E. 71 using technology derived from the four captured Alliance's Gundam, the Freedom Gundam has Phase Shift Armor and its armaments include CIWS guns, beam sabers, shield, plasma beam cannons, railguns, and a beam rifle. When the latter three weapons are used simultaneously, the Freedom is said to be in 'Full Burst Mode'. The suit has full flight capabilities in the atmosphere and the back-mounted wings can be deployed in "High Mobility Aerial Tactics (HiMAT) Mode" to enhance its mobility in the atmosphere or in space. It also has an advanced targeting system, the Multi Lock-On System, that allows it to target and fire at multiple enemy units simultaneously. Due to its capabilities and loadout, the suit has a reputation as a specialized 'Mobile Suit Killer', but its high performance resulted in a complicated control system that demands extremely fast reaction speed and spatial awareness from its pilot.When required, the Freedom Gundam can dock with a support unit, the METEOR unit, for heavier firepower and greater speed. The Freedom Gundam has virtually unlimited combat endurance as it is equipped with a Neutron Jammer Canceller and powered by a nuclear reactor. Kira describes the suit as having over four times the power of the GAT-X105 Strike Gundam. However, what this exactly means is unclear. The Freedom Gundam is meant to operate alongside the ZGMF-X09A Justice Gundam, and they are often based on the warship, the FFMH-Y101 Eternal, which is designed specifically to maintain them. Even in CE 73, the suit is still considered by some people, such as Shinn Asuka, as the most powerful mobile suit out there. Overall, it is one of the Clyne Faction's symbols of power, along with the Eternal, the Archangel, and the Justice.

The ZGMF-X20A Strike Freedom Gundam (aka Strike Freedom, Freedom) is the successor of the ZGMF-X10A Freedom Gundam. Introduced in Mobile Suit Gundam SEED Destiny, it is piloted by Kira Yamato. A mobile suit tuned to meet Kira Yamato's needs, the Strike Freedom has Variable Phase Shift armor, and like its predecessor, ZGMF-X10A Freedom Gundam, is primarily armed with powerful ranged weapons. Its armaments include head-mounted CIWS, an abdomen-mounted multi-phase beam cannon, hip-mounted railguns, combine-able beam sabers and beam rifles, DRAGOON pods controlled by the new Super DRAGOON system and beam shields. It is powered by the new Hyper-Deuterion Engine, and is also equipped with the Neutron Jammer Canceler and the Voiture Lumiere propulsion system.Due to Kira's stellar piloting, his mobile suit is rarely hit during combat and thus Strike Freedom's design emphasizes maneuverability over its armor's defensive capabilities, though beam shields were installed as a compensatory defensive measure. As a result, its armor is split into smaller pieces to improve the movement range of the joints (a similar armor-splitting system was also implemented in ZGMF-X42S Destiny Gundam). To compensate for exposing more of its internal parts, the suit's internal skeleton and joints adopted PS armor materials. When these parts phase-shift, they gain strength and near human flexibility. Additionally, excess residual energy within the body can be discharged through the joints' glowing effects.The internal PS armor materials also help to withstand the massive output and Gs caused by the Hyper Deuterion engine and the new propulsion system, playing a role in increasing Strike Freedom's mobility. However, the main contributor to the MS's superior mobility are the mobile weapon wings, which can be deployed in the "High Mobility Aerial Tactics (HiMAT)" Mode to enhance the suit's mobility in the atmosphere or in space. The wings also features a variant of the "Voiture Lumiere" propulsion system, which can generate a visual effect called the "Wings of the Skies" similar to ZGMF-X42S Destiny's Wings of Light and is used as a means of high speed movement.The Strike Freedom's Super DRAGOONs are based on ZAFT's second generation DRAGOON system, with additional unique modifications. Designed for Kira's use, they allow him to hit more targets at once using the Multi Lock-On System and Full Burst Mode as compared to when he was piloting the original Freedom. They also grant Kira the ability to hit the enemy from multiple directions remotely. Like the Freedom, Strike Freedom is designed to operate alongside another mobile suit, in this case, the ZGMF-X19A ∞ Justice Gundam and is stationed on board the warship Eternal. It also has full flight capabilities in the atmosphere and can dock with the METEOR unit to further augment its firepower.

The XXXG-01W Wing Gundam (aka Zero-One or Gundam 01) is the titular mobile suit of the anime Mobile Suit Gundam Wing. It was primarily piloted by Heero Yuy. Out of the five original Gundams created for Operation Meteor, Wing Gundam is the most well-balanced in terms of abilities and bears the closest resemblance to their common ancestor: the XXXG-00W0 Wing Gundam Zero. Like Wing Zero, the Wing Gundam can transform into an alternate flight form known as "Bird Mode" and has a powerful Buster Rifle as part of its armaments. However, the "ZERO System" interface (which had technical problems) and other parts considered to be excessive were not included, and the skills of the pilot are needed to make up for the shortfall. Its cockpit is a spherical capsule surrounded by a linear frame, and it swivels in the same direction as the mobile suit's head. Unlike the standard OZ cockpit, it is a floating cockpit with a shock mitigation function.The major contributor to Wing's mobility is the pair of wing units on its backpack. These units not only generate lift, but can also change the aerodynamic characteristics of the mobile suit through the movements of their individual panels, supporting a range of speeds from stall to hypersonic. Even in outer space, these wing units exhibit high attitude control capability using both AMBAC and built-in vernier thrusters. By transforming into Bird Mode, Wing's mobility and movement range are increased further, allowing it to conduct operations that other Gundams could not. The leg thrusters on the back of the knees serve as the main verniers in Bird Mode, and are also used for dashing on the ground in MS mode.

The XXXG-00W0 Wing Gundam Zero (ウイングガンダムゼロ Uingu Gandamu Zero?) (aka Wing Zero, Wing 0, or just Zero) is a mobile suit that appears in Mobile Suit Gundam Wing. Wing Zero was the first Gundam designed by the five engineers who had developed the OZ-00MS Tallgeese. Around A.C. 175, the MS, which was developed as a "weapon" by OZ, began to evolve as an epoch-making mobile weapon based on the Tallgeese (Prototype Leo). Meanwhile, several engineers that were at the core of the Tallgeese development ran away from OZ to develop even higher performance MS. Five of them gathered to develop a MS that would adopt "technology and materials that did not yet exist at that point in time", including "Gundanium", which was a cutting-edge material at that time. Having been developed in light of the Tallgeese's failure, it became a dreadful machine equipped with an interface that transcended the limits of the pilot. That is "Wing Zero", and the material adopted gave it the code name "Gundam". By transforming into Neo Bird Mode, high-speed cruising is possible; in addition, the Twin Buster Rifle has the power to destroy a space colony in a single hit.Wing Zero's head unit is an aggregation of various sensors and head Vulcan Guns are not equipped. Its chest unit is equipped with the main generator and a "ZERO System" built-in type cockpit. The ZERO System also turned out to be what the five engineers feared the most as it forced the pilot to achieve the "perfect victory". The five engineers, harboring a fear of the dimension of Wing Zero's excessive destruction coefficient (in practice, the parts with the required specifications could not have been supplied at that point in time), suspended the machine's development and sealed its design data. In hiding, the five engineers who had returned to their respective base colonies would develop five "Gundams" that could be said to be unique Wing Zero-derived machines. And then in A.C. 195, the seal was broken by Quatre Raberba Winner, one of the five Gundam pilots who had carried out Operation Meteor; and Wing Zero, which had been impossible to build at the time of its design, is born.

The GAT-X105 Strike Gundam is a prototype multi-mode mobile suit introduced in the anime Mobile Suit Gundam SEED. Its primary pilot was Kira Yamato before it was passed down to former mobile armor ace pilot, Mu La Flaga.The Strike Gundam is the most versatile of the five Gundams in the Earth Alliance's G Project and can be easily configured for various types of combat. Using its Striker Packs, it can be outfitted for high mobility combat (Aile Strike), long-range assault (Launcher Strike), or melee combat (Sword Strike). In addition, the Striker packs are also equipped with backup batteries that can extend the Strike's operation time. Built on the X100 series frame first adopted by the GAT-X102 Duel Gundam, the Strike also has the Phase Shift armor system. In terms of armament, the Strike itself is equipped only with two head-mounted CIWS and a pair of combat knives stored in the side skirt armor, but it can also be armed with a bazooka, a shield, and a beam rifle. Later on, the Strike Gundam was equipped with a Natural-use OS to allow its new pilot, Mu La Flaga, to control the suit effectively.