Mobile Suit Gundam

Experience the iconic Mobile Suit Gundam universe with the Bandai High Grade Universal Century (HGUC) #019 MSM-07S Z'Gok Char's Custom Type model kit. This 1/144 scale kit faithfully recreates Char Aznable's custom aquatic mobile suit, known for its distinctive red color scheme and formidable design. Features: Highly Articulated Build: The model boasts posable, multi-segmented arms and legs, allowing for dynamic poses. The claws are designed to open and close, enabling thrusting and lunging stances. Detailed Design: Accurate detailing captures the essence of the Z'Gok as seen in the original Mobile Suit Gundam series. Quality Materials: Constructed from durable PS, PE, and PVC materials, ensuring a sturdy and lasting build. Scale: 1/144 scale, making it a perfect addition to any collection. This kit is suitable for both beginners and seasoned modelers, offering an enjoyable building experience with minimal painting required due to the colored plastic parts. Once assembled, it becomes a fully articulated figure, perfect for display or diorama setups. Note: Assembly is required. Tools such as sprue cutters and finishing tools are recommended to complete the build.

The Mega Size 1/48 MS-06S Char's Zaku II is an impressive model kit representing Char Aznable's iconic mobile suit from the original "Mobile Suit Gundam" series. This kit features: Highly detailed parts capturing the distinct design of Char's custom Zaku II. Articulated joints allowing for dynamic posing options. Accessories including the Zaku Machine Gun, Heat Hawk, and Zaku Bazooka. Snap-fit assembly with molded color parts, eliminating the need for painting. Standing approximately 37.5 cm (14.75 inches) tall when completed, this model offers a commanding presence, making it a standout addition to any Gundam collection.

The MG 1/100 RX-93-ν2 Hi-ν Gundam is a Master Grade model kit representing Amuro Ray's powerful mobile suit from "Mobile Suit Gundam: Char's Counterattack – Beltorchika's Children." This kit features: Articulated joints for superior posing options, allowing dynamic recreation of iconic stances. Weapons including a beam rifle, hyper bazooka, shield, and six fin funnels for enhanced display and playability. Snap-fit assembly with molded color parts for a polished finish without the need for painting. Clear parts and detailed panel lining for an authentic and premium look. Standing approximately 22 cm tall when completed, this kit combines intricate details and exceptional engineering, making it a must-have for Gundam fans and builders alike.

The MG 1/100 RX-78-4 Gundam Unit 4 is a Master Grade model kit representing the RX-78-4 Gundam Unit 4 from Kunio Okawara's M-MSV design series, featured in "Mobile Suit Gundam Side Story: Space, To the End of A Flash." This kit includes: Articulated joints allowing for dynamic poses. Weapons including a mega beam launcher, hyper beam rifle, beam saber, and foldable shield. Snap-fit assembly with molded color parts, minimizing the need for painting. Once assembled, the model stands approximately 18 cm tall, making it a notable addition to any Gundam collection.

The Bandai Mega Size 1/48 MS-06 Zaku II Gunpla Model Kit offers enthusiasts an impressive and highly detailed representation of the iconic mobile suit from the Mobile Suit Gundam series. Standing at approximately 37.5 cm (about 15 inches) tall when assembled, this kit provides a substantial presence, making it a standout piece for any collection. Key Features: Scale and Size: 1/48 scale, resulting in a model that stands about 37.5 cm tall upon completion. Articulation: Designed with multiple points of articulation, allowing for dynamic posing and display options. Accessories: Includes the Zaku's signature weaponry: Zaku Machine Gun Heat Hawk Zaku Bazooka Assembly: Engineered for snap-fit assembly, eliminating the need for glue. The parts are molded in color, reducing or eliminating the need for painting. Details: Features intricate surface detailing, providing an authentic representation of the MS-06 Zaku II. Rel

The RX-78GP01 Gundam "Zephyranthes" (aka Zephyranthes, GP01, Unit 1) is a prototype general-purpose mobile suit introduced in the Mobile Suit Gundam 0083: Stardust Memory OVA. It was piloted by Kou Uraki.  Developed as part of the Gundam Development Project, the GP01 was a ground-use general purpose mobile suit intended to be an improvement of the RX-78-2 Gundam, which achieved exceptional battle results during the One Year War. Being an experimental unit, it was equipped with an increased number of sensors, some of which were exposed due to being temporary. Compared to the RX-78, its sensors and balancer were upgraded or redesigned. Overall, the GP01 was designed to allow movement closer to that of a human (a design concept that would eventually evolve into the Movable Frame). In order to ensure the survival of the pilot and the combat data, the GP01 retained the Core Block System. However, to address the RX-78's structural weakness in the stomach, the GP01 adopted an experimental "horizontal in the body" structure instead of the previously used "vertical in the body" structure. The GP01's main generator, main thrusters, and operation and control instruments were all integrated into its FF-XII Core Fighter II. In addition, when docked, the Core Fighter's beam guns serve as the GP01's beam sabers. Thanks to this design, the Core Fighter's propellant, thrusters, and weapons were no longer dead weight when docked. By switching the Core Fighter, the GP01 could operate both on Earth and in space, though additional readjustment and maintenance was still needed. Thanks to this design, despite being a general-purpose mobile suit, its performance rivaled or exceeded dedicated ground-use and space-use mobile suits in both environments.

RG 1/144 RX-78-2 Gundam Ver. 2.0 – Real Grade Model Kit Experience the ultimate Gunpla build with the RG 1/144 RX-78-2 Gundam Ver. 2.0, a highly detailed Real Grade model kit of the legendary mobile suit from the original Mobile Suit Gundam series. At 1/144 scale, this kit offers advanced articulation, precise detailing, and a rewarding build for fans and collectors alike. Key Features: Realistic Design: Faithfully replicates the RX-78-2 Gundam with intricate panel lines, accurate proportions, and advanced color separation. Buildable Inner Frame: The Real Grade inner frame system ensures dynamic articulation and stability for posing and display. Iconic Accessories: Includes the Beam Rifle, Shield, and Beam Sabers, plus extra hand parts for customization. Marking Stickers Included: Add finishing touches with high-quality marking stickers to complete your build. Perfect for both beginners and experienced modelers, this kit combines engineering precision with aesthetic authenticity. Build and display the Gundam that started it all – order the RG RX-78-2 Gundam Ver. 2.0 today!

The MS-09 Dom (aka MS-09B Dom) is a mass-production ground combat mobile suit introduced in Mobile Suit Gundam. Its most well known pilots are the Black Tri-Stars.

SD BB Senshi #238 Gogg & Acguy & Zock

The MS-06R-1A Zaku II High Mobility Type is a mobile suit first introduced in Mobile Suit Variation. After the successful release of the MS-06R-1 Zaku II High Mobility Test Type the Zeon engineers began to receive feedback from the pilots on ways the mobile suit's design could be improved. The biggest difference from the R-1 is that the fuel tanks on the back and legs have been modified into cartridges to solve the problem of propellant consumption. In particular, those of the legs are changed into cylindrical cartridges. This not only simplifies replenishment in the mother ship, but also allows for replenishment in outer space, and a platoon equipped with this unit is to be accompanied by a Zaku equipped with refill cartridges. As a result of these changes, the MS-06R-1A Zaku II High Mobility Type has a longer operation time. Furthermore, an escape system has been adopted in the cockpit for this machine, and it is possible to eject the seat and base forward in an emergency. The base has a certain degree of propulsion function, and is also equipped with solar cells and life support devices.

The MS-05B Zaku I was a mobile suit introduced in Mobile Suit Gundam. The MS-05B was the late production variant of the Zaku I and the first mobile suit assigned to combat units. An improvement over the MS-05A Zaku I Early Type, the B Type was visually identical to the A Type, but featured an improved cockpit design and better armor material. Like its predecessor, the MS-05B's power transmission pipes were all fixed and contained inside its armor. However, as the B Type saw wider deployment than the A Type, the flaws of this design quickly became apparent: since the power pipes took up most of its internal space, it was very difficult to improve its generator output or swap out parts. The structures of its limbs were also very complex due to the internalized power system. These problems would later be addressed by the MS-06 Zaku II series. Its weapons included a custom machine gun, a 280mm bazooka, and a spike shield. It could also be equipped with the standard weapons used by the MS-06 series, including the 120mm machine gun and the heat hawk.

The RX-78GP01 Gundam "Zephyranthes" (aka Zephyranthes, GP01, Unit 1) is a prototype general-purpose mobile suit introduced in the Mobile Suit Gundam 0083: Stardust Memory OVA. It was piloted by Kou Uraki.  Developed as part of the Gundam Development Project, the GP01 was a ground-use general purpose mobile suit intended to be an improvement of the RX-78-2 Gundam, which achieved exceptional battle results during the One Year War. Being an experimental unit, it was equipped with an increased number of sensors, some of which were exposed due to being temporary. Compared to the RX-78, its sensors and balancer were upgraded or redesigned. Overall, the GP01 was designed to allow movement closer to that of a human (a design concept that would eventually evolve into the Movable Frame). In order to ensure the survival of the pilot and the combat data, the GP01 retained the Core Block System. However, to address the RX-78's structural weakness in the stomach, the GP01 adopted an experimental "horizontal in the body" structure instead of the previously used "vertical in the body" structure. The GP01's main generator, main thrusters, and operation and control instruments were all integrated into its FF-XII Core Fighter II. In addition, when docked, the Core Fighter's beam guns serve as the GP01's beam sabers. Thanks to this design, the Core Fighter's propellant, thrusters, and weapons were no longer dead weight when docked. By switching the Core Fighter, the GP01 could operate both on Earth and in space, though additional readjustment and maintenance was still needed. Thanks to this design, despite being a general-purpose mobile suit, its performance rivaled or exceeded dedicated ground-use and space-use mobile suits in both environments.

The RGM-79 GM (aka GM, pronounced Jim) was the first mass-produced mobile suit of the Earth Federation. It first appears in Mobile Suit Gundam. The RGM-79 GM is a mass-produced mobile suit based on the RX-78-2 Gundam. Its basic frame is easily adaptable to modifications into mission specific GM models, and has a fairly high level of mobility, for the time, both on Earth and in space. It has a maximum acceleration of 0.94 Gs in space, which is better than the Gundam's and roughly twice of the Zaku's. On Earth's surface, the GM is also faster than the Zaku II. The armor of the GM uses Titanium Alloy, a sturdy metal that could be refined more quickly and easily than the Gundam's Luna Titanium Alloy. Although titanium alloy is less durable than Luna Titanium, it is also slightly lighter which reduces the GM's overall mass compared to the Gundam's and is still superior to the Zaku II's super-high tensile steel armor. The GM was primarily armed with a beam spray gun, a less powerful version of the Gundam's beam rifle but could still destroy MS in one shot. Early in production, the beam spray gun had yet to be mass-produced so most GMs were equipped with various machine guns. These machine guns continued to be used by the GMs later, and the machine could also use the Gundam's beam rifle when required. It could also use a mass production version of the Gundam's Hyper Bazooka for heavier firepower. For close combat, the GM has a beam saber, and a shield similar to the one used by the Gundam. Commander units sometimes featured a second beam saber. Lastly, the GM has a pair of head-mounted 60mm vulcan guns for intercepting missiles, small vehicles or to stop enemy MS from closing in. From the GM started the RGM series that remained the mainstay of the Federation's mass production mobile suits until the end of the Federation itself.

The High Grade Universal Century (HGUC) RGM-79D GM Cold Districts Type is a 1/144 scale kit released in 2003.

The RX-78GP02A Gundam GP02A Beam Bazooka Type is a variant of the RX-78GP02A Gundam "Physalis" featured in the original design series Harmony of Gundam by Hajime Katoki.

The MS-06GD Zaku High Mobility Type (Surface Type) are custom mobile suits used by the Southern Cross Corps in Mobile Suit Gundam: Cucuruz Doan's Island.

The RX-78NT-1 Gundam NT-1, nicknamed Alex, was a Newtype-use mobile suit created by the Earth Federation Forces. It was introduced in the OVA Mobile Suit Gundam 0080: War in the Pocket.

The RX-78-2 Gundam is the titular mobile suit of Mobile Suit Gundam television series. Part of the RX-78 Gundam series, it was built in secret on Side 7. The Gundam would turn the tide of war in favor of the Earth Federation during the One Year War against the Principality of Zeon. It was primarily piloted by Amuro Ray. The Gundam was incredibly advanced for its time. Built from lightweight Luna Titanium Alloy, its frame was both lighter than that of Zeon's mass-produced mobile suits and much sturdier, able to shrug off a MS-06 Zaku II's machine gun fire with little to no damage. Its offensive power was above and beyond that of the Zakus. The Gundam would engage in most battles with its beam rifle, making it the first mobile suit to have firepower equivalent to a battleship's beam cannons. In addition, it made use of two beam sabers, blades of extremely hot plasma which could cut through any metal with ease. Those beam sabers could be extended into a spear-like beam javelin, which could be used to stab into an enemy from a longer distance.The Gundam also used more conventional weaponry; it could launch rockets with a "Hyper Bazooka", the Federation's answer to the bazookas used by Zeon's Zakus; in addition, its head was outfitted with a pair of small vulcan guns, as a way of attacking light-armored aircraft and vehicles without wasting ammo or energy from its more powerful armaments. It also made use of a very unconventional close-range weapon known as the "Gundam Hammer" - a large weapon similar to a flail which could be swung at enemies to deal crushing damage. The Gundam Hammer was eventually upgraded for use in space and outfitted with a number of verniers on the ball, and renamed to be the "Hyper Hammer". Lastly, it wielded a shield which would offer it a defense against enemy attacks that not even its Luna Titanium body could withstand without damage. Gundam pilot, Amuro Ray, would make use of the shield as a decoy in many battles, taking advantage of its size to fool the enemy into thinking he was charging at them, then attacking the enemy through the shield.In terms of technology, the Gundam was equipped with a sophisticated Learning Computer which would collect pilot and enemy data during skirmishes and allow the Gundam to operate more effectively. The data from the computer was used by the Federation to improve the controls of the Gundam's mass-produced form, the RGM-79 GM. In addition, it was upgraded by Federation technician Mosque Han shortly before the Battle of A Baoa Qu to improve its reaction times, the joints of the Gundam were given a Magnet Coating, based on the experimental procedure performed on the RX-78-3 "G-3" Gundam and later used on Amuro's intended successor unit, the RX-78NT-1 Gundam "Alex".The Gundam makes use of the Core Block System implemented in the other V Project units. The torso of the Gundam is mostly hollow so that a FF-X7 Core Fighter can dock with it. This allows the pilot to jettison the legs and torso of the Gundam should the machine be too heavily damaged and gives the pilot a chance to escape from battle. Later, during Operation Odessa, the Gundam is given a support unit known as the G-Fighter. The two G-Fighters were designed to take advantage of the Gundam's modular system and diversify the Gundam's role in active combat. These modes ranged from the assault bomber G-Armor to the close combat support tank G-Bull. Officially, it is called a prototype, but it is also said to be more of a custom-made machine that is finished with high quality materials and the best technology.

MS-06S Char's Zaku II is a mobile suit featured in the Mobile Suit Gundam: The Origin manga and its OVA adaptation. It was piloted by Char Aznable during the One Year War. Char's MS-06S Zaku II is a customized version of the standard MS-06S Zaku II Commander Type (an overall improved MS-06F Zaku II) painted in his personal red colors. Being a commander's unit, a horn-like decoration was also attached to its head. Despite the high risks, Char personally ordered the removal of its limiters, allowing it to use its thrusters to the maximum limit. The hit-and-run tactics enabled by the resulting high thrust, and the impression its distinctive colors made on the battlefield, led to Char's nick name, "Red Comet". After the Clash of Loum, Vice Admiral Dozle secretly ordered Char to command the Falmer, a custom Musai-class battleship, and unit emblems and victory markings were applied to his MS-06S. These included bright white lines indicating it as the commander's unit, the unit number "A12" and emblems of the Falmer.

The MS-06F Zaku II is one of many variants of the MS-06 Zaku II series and was introduced in Mobile Suit Gundam television series. The MS-06F Zaku II was the Principality of Zeon's mainstay mobile suit during the One Year War. Compared to the MS-06C Zaku II Early Production Type, the MS-06F removed the heavy anti-nuclear protections, reducing its armor weight and improving its mobility. It was also refitted with a more powerful generator: the MYFG-M-ES series fusion reactor, jointly developed by Zeonic and M&Y Company. Otherwise, it was not significantly different from its predecessors, the MS-06A and the MS-06C. There existed subtle differences among the F-Type, depending on the time of manufacture and the originating factory. Prior to the introduction of the MS-06S Zaku II Commander Type, MS-06F piloted by squadron leaders were equipped with a head-mounted blade antenna.The MS-06F could run at a speed of 85 km/h, leap 100m into the air with the use of its thrusters, and lift around 80-90t of weight with one hand. Its thrusters had a thrust of 45 tons. Though its punch had a force of 560t, doing so risked severely damaging its manipulators. Instead it more frequently used the spike armor on its left shoulder for shoulder tackle, which had a force of 4,500t. The cost of a MS-06F was equivalent to that of five Type 61 Tanks, or 1,500 civilian automobiles from the year U.C. 0078 (each costing 30% of a salaryman's average annual salary).