COLLECTIONS
Active Filters
Availability
Price
Under $25

HG 1/144 HGUC MSM-07E Z'Gok Experiment
Bandai
$15.00The MSM-07E Z'Gok-E (aka MSM-07E Z'Gok Experiment) is an experimental amphibious mobile suit introduced in the Mobile Suit Gundam 0080: War in the Pocket OVA . The Z'Gok E was an experimental improved version of the MSM-07 Z'Gok. Besides improved beam cannons in its arm, allowing for rapid-fire, the original Z'Gok's head-mounted missile launchers were also replaced with torpedo launchers for additional firepower when operating underwater. To allow for better cruising range underwater, the suit's main propulsion systems were relocated from the back to the legs to create a more streamlined body shape. Its limbs were also designed to be retractable for the same reason. The thrusters built into its back were meant for jumping and various ground based movements, and greatly boost the suit's mobility on land. The Z'Gok E used a standardized cockpit with the introduction of the United Maintenance Plan, and was powered by an improved generator which gave the suit ample performance.

HG 1/144 HGUC RGM-79 GM
Bandai
$10.00The RGM-79 GM (aka GM, pronounced Jim) was the first mass-produced mobile suit of the Earth Federation. It first appears in Mobile Suit Gundam. The RGM-79 GM is a mass-produced mobile suit based on the RX-78-2 Gundam. Its basic frame is easily adaptable to modifications into mission specific GM models, and has a fairly high level of mobility, for the time, both on Earth and in space. It has a maximum acceleration of 0.94 Gs in space, which is better than the Gundam's and roughly twice of the Zaku's. On Earth's surface, the GM is also faster than the Zaku II. The armor of the GM uses Titanium Alloy, a sturdy metal that could be refined more quickly and easily than the Gundam's Luna Titanium Alloy. Although titanium alloy is less durable than luna titanium, it is also slightly lighter which reduces the GM's overall mass compared to the Gundam's and is still superior to the Zaku II's super-high tensile steel armor.The GM was primarily armed with a beam spray gun, a less powerful version of the Gundam's beam rifle but could still destroy MS in one shot. Early in production, the beam spray gun had yet to be mass-produced so most GMs were equipped with various machine guns. These machine guns continued to be used by the GMs later, and the machine could also use the Gundam's beam rifle when required. It could also use a mass production version of the Gundam's Hyper Bazooka for heavier firepower. For close combat, the GM has a beam saber, and a shield similar to the one used by the Gundam. Commander units sometimes featured a second beam saber. Lastly, the GM has a pair of head-mounted 60mm vulcan guns for intercepting missiles, small vehicles or to stop enemy MS from closing in. From the GM started the RGM series that remained the mainstay of the Federation's mass production mobile suits until the end of the Federation itself.

DDB Model Gundam Aerial Special Effects Parts HG/FM
DDB
$12.00IMPORTANT: Model Kit and Action Base are not included Gundam Aerial Special Effects Parts Clear Blue Trail Parts Reactive to UV Lights Weapons Display Stand Included

SD Gundam Ex-Standard RX-93 Nu Gundam
Bandai
$12.00The RX-93 ν Gundam (aka Nu Gundam, Nu) is a mobile suit that appears in Mobile Suit Gundam: Char's Counterattack. It was designed and piloted by Amuro Ray. The ν Gundam is one of the most advanced mobile suits during the Second Neo Zeon War in U.C. 0093, together with Char Aznable's MSN-04 Sazabi, it is used by Amuro Ray who also came up with its basic design. It was manufactured at Anaheim Electronics' Von Braun plant and completed in a short period of time (about three months) under the supervision of chief engineer October Saran. Its design is based on the average specification values of each successive generations of Gundam-type units from the original RX-78-2 Gundam to the MSZ-010 ΖΖ Gundam, and updated with state-of-the-art technologies introduced at the time. Various test data collected from the ARX-014P Silver Bullet (Funnel Test Type), the YRA-90A μ Gundam and the RX-9 Narrative Gundam were also used in its development.The ν Gundam's design focuses on versatility and operational aspects, as well as emphasis on reliability and durability for protracted battles. It adopts unitized parts that are designed according to EFF standards, except for the Psycho-Frame, for easier procurement of parts and materials and reducing special components as much as possible. It can be easily repaired due to maintenance feedback and combat data. In addition, it reflects Amuro Ray's experience as an MS pilot cultivated over the years.Incorporating the Psycho-Frame technology secretly provided to Anaheim Electronics by Char Aznable of Neo Zeon, the ν Gundam was able to utilize Psycommu weapons and channel the emotions and mental energies of a Newtype pilot. It is also the first Gundam-type machine to be equipped with Funnels, and a newly developed MS control program is installed to account for the ν Gundam's center of mass during the separation and movement of the Funnels. Despite its short development time, the ν Gundam proved itself to be a formidable mobile suit and when combined with legendary ace pilot Amuro Ray's immense skill and experience, this powerful, state-of-the-art machine was able to almost single-handedly hold back the whole Neo Zeon force, and its Psycho-Frame was put to the test to determine the history of humanity living on earth.

HG 1/144 RGM-79SP GM Sniper II
Bandai
$20.00The RGM-79SP GM Sniper II (ジム・スナイパーII Jimu sunaipā II?) is a variant of the RGM-79G GM Command and first appeared in Mobile Suit Gundam 0080: War in the Pocket. Based on the GM Command series and the concept of the RGM-79SC GM Sniper Custom deployed earlier in the war, the GM Sniper II is a high-performance machine capable of using specialized weaponry at maximum capacity for ultra-long-range engagements. It was the last and most advanced of the Federation's line of GM Sniper mobile suits during the One Year War. It was also one of the last GM-type units to be developed during the war.The GM Sniper II's specialized head visor has built-in compound sensors with specialized laser sensors, powerful zoom cameras, and image stabilizers for precision, and long-range targeting. During operation, goggles cover the main camera and other elements of the head sensor array, and together with head unit coolers, they physically eliminate noise interference and enhance long-range sniping capabilities. The suit is one of the few capable of accurately firing MS-sized sniper rifles that used physical projectiles. Unlike beam weapons, these rifles are not affected by magnetic forces or solar winds, but only a few were made.Operationally, the GM Sniper II was used to eliminate priority targets such as base ships and command machines from beyond the range of conventional weapons. However, the suit is not just a long-range specialist. Like the highly regarded GM Sniper Custom deployed earlier, the GM Sniper II maintains versatility while having enhanced performance. It has sufficient specifications for mid-range support and close combat and can use almost any existing MS armament. In terms of overall performance, it was one of the few machines to match the RX-78-2 Gundam, which was the standard against which other Federation suits were held to. In fact, its specifications on paper were superior to the Gundam's, and it was one of the few Federation production suits that could take on the MS-14A Gelgoog in a one-on-one fight.The armor of the GM Sniper II is reinforced with pieces of Luna Titanium alloy, and mobility is improved via sub-thrusters in various locations and a total of six large vernier thrusters – two in the backpack and four on the legs. The four large vernier thrusters in the legs have high output to make up for the shortfall in the output of the backpack thrusters, which are designed for precision, and boast superb pitching performance (rapid up and down movements). The suit's main verniers are built along the machine's core axis, an arrangement also used in later MS such as the MSA-003 Nemo and RGM-89 Jegan. This is an effective way to boost mobility while maintaining the same basic silhouette. The suit's torso is an upgraded version of the GM Command's and has superior specifications with additional waste heat and electrical noise suppression material. Its arms are constructed with the same parts used in other GM models, but with highly tuned servos and actuators and an updated driver.Only very few GM Sniper II were manufactured due to it being developed late in the war. Production costs were also undeniably higher than standard mass-produced machines, and apart from a few prototypes built for test purposes, the suit did not have any follow-up models. It is believed that the GM Sniper II's development team later worked on the Nemo, but this is unconfirmed. Due to the GM Sniper II's excellent performance and shooting capabilities, it continued to be used for sniping missions long after the war ended. Units deployed by the Titans have a dark blue color scheme and updated features such as a new optical camera system for long-range shooting and improved sensor radius.

HG 1/144 Gundam Gusion AWS-G-11 (Gundam Iron-Blooded Orphans)
Bandai
$15.00The HG 1/144 Gundam Gusion from the acclaimed series Mobile Suit Gundam: Iron-Blooded Orphans is a high-grade model kit that brings the formidable mobile suit to life in stunning detail. Known for its bulky armor and immense power, the Gundam Gusion is a favorite among fans and modelers alike. Key Features: Scale and Materials: 1/144 scale model kit crafted from high-quality polystyrene and polyethylene, ensuring durability and precision in every component. Articulation: Features a double-sided ball-joint neck, pivoting torso, and flexible shoulder joints, allowing for dynamic poses that capture the Gundam's imposing presence. Weaponry: Equipped with the iconic Gusion Hammer and a sub-machine gun, enabling a variety of combat-ready display options. Design Details: The model faithfully replicates the Gundam Gusion's unique design, including its distinctive head and armor configurations. Release Information: Released in December 2015 as part of Bandai's High Grade IRON-BLOODED ORPHANS line, this kit offers an accessible yet detailed build, making it ideal for both newcomers and seasoned builders. The HG 1/144 Gundam Gusion is a must-have addition to any Gundam collection, offering a rewarding building experience and a striking display piece that embodies the raw power of the Iron-Blooded Orphans universe.

HG 1/144 HG00 GN-005 Gundam Virtue
Bandai
$20.00The GN-005 Gundam Virtue (aka Gundam Virtue, Gundam Virtue Particle, Virtue) is a mobile suit featured in season one of Mobile Suit Gundam 00. It is piloted by Tieria Erde. A heavily armed and armored mobile suit, the Gundam Virtue has the highest offensive and defensive power among the third generation Gundams deployed in AD 2307 by the Celestial Being, a paramilitary organization aiming to eliminate world conflicts through armed interventions. Specializing in artillery warfare for fleet battles and assaulting enemy strongholds, the Virtue's firepower is unmatched among contemporaries thanks to heavy beam weaponry, consisting of a GN Bazooka and two GN Cannons. As Virtue is not meant for anti-mobile suit combat, its only melee weapon is a pair of GN Beam Sabers. Due to its large size, Virtue's mobility and evasive capabilities are lower than the other Gundams, but these weakness are mitigated by its high defensive strength in the form of heavy armor and the ability to generate a 360-degree GN Field barrier around itself that can nullify most physical and beam attacks.The Virtue demonstrated impressive propulsion capabilities when it was shown to be capable of overcoming the combined thrust of six MSJ-06II-E Tieren Space Types. Like the other Gundams, Virtue has a semi-perpetual GN Drive in the center of its body that provides almost limitless energy and generates special, multifunctional GN Particles. The GN Particles have a unique mass reduction effect and because of this, the heavily equipped Virtue can operate efficiently and weighs only half as much as the similarly bulky MSJ-06II-A Tieren Ground Type operated by the Human Reform League. This reduction effect remains even when the Virtue is not operating as the GN Drive continues to function. The GN Particles are also utilized for propulsion, beam weaponry, generation of GN Field, attitude control, and for stealth purposes as they can cause electromagnetic interference, leaving conventional communications and radar devices useless.Due to the heavy GN Particle demand of Virtue's beam weaponry and GN Field, large capacity GN Condensers are mounted throughout its body to store excess particles produced by the GN Drive when the Gundam is not operating. The GN Particles are primarily controlled through a pair of torso-mounted clavicle antennas, and light purple-colored "GN Cables" are installed in various locations to facilitate the supply of these particles to each part of the Gundam and for attitude control purposes. In an emergency, the Virtue can activate the special "Trans-Am System" to enhance its thrust and defensive strength, as well as increase its output to three times that of its normal specifications for a limited time period. The Virtue glows red as a side-effect and though Trans-Am boosts the power of its beam weaponry, this system is also a double-edged sword as Virtue's performance will drop dramatically once it ends.Besides the Trans-Am System, which is also utilized by other Gundams, the Virtue has another method of responding to emergency which is more unique, it can purge its armor to reveal the GN-004 Gundam Nadleeh. However, this was not the original intention of the armor purging mechanism, which was meant for the simultaneous switch to Nadleeh while activating the latter's Trial System. The concept of hiding a Gundam within another Gundam can be traced to the common predecessor of Virtue and Nadleeh – the second generation GNY-004 Gundam Plutone, which is fitted with an ejectable flight unit known as the "Core Fighter". The Plutone is also the first Gundam capable of generating a 360-degree GN Field, but its generation system is not as stable as Virtue's. The Nadleeh is concealed to prevent its Trial System, an ability to stop betrayers, from being discovered and for effective utilization of the limited numbers of GN Drives that Celestial Being has.Among the third generation Gundams, Virtue's development was the slowest. At that time, the current form of Virtue was also known as "Gundam Virtue Particle" to differentiate it from an alternate design, the physical projectile-based GN-005/PH Gundam Virtue Physical. Both designs are prepared by Veda, Celestial Being's quantum computing system, based on its predictions about armed intervention missions. Despite their differences, both Virtue Particle and Virtue Physical are designed as artillery units for anti-fleet and anti-stronghold combat, this ensure the Nadleeh is positioned at the rear and could quickly return to the base or mothership to be outfitted with more effective equipment to stop betrayers. In the end, after studying the results of multiple joint exercises involving the four Gundam Meisters, Veda chose Virtue Particle as it displayed better cooperability with the other Gundams.Veda rejected the idea of keeping the Virtue Physical as alternate equipment, because switching equipment mid-mission is expected to be very difficult due to the lean manpower and the design of the mothership. There is also the worry that the enemy might discover the hidden Nadleeh by observing the commonalities between the two equipment sets. The Gundam Virtue is eventually succeeded by the reborn Celestial Being's GN-008 Seravee Gundam, which is also an anti-fleet and anti-stronghold mobile suit equipped with multiple beam cannons and GN Field. Data of the Gundam Virtue is also utilized in the development of the CBY-077 GN Cannon and the GNZ-003 Gadessa, the former is part of Veda's alternate plan for armed intervention and the latter is used by an enemy of the reborn Celestial Being.

【CLEARANCE】HG 1/144 Witch from the Mercury F/D-19 Zowort
Bandai
$22.00 $18.00F/D-19 Zowort (ザウォート Zauōto?) is a mobile suit introduced in Mobile Suit Gundam the Witch from Mercury .An all-purpose mass production unit manufactured by Peil Technologies, known for their prowess at developing airborne mobile suits. Despite its massive upper body, the Zowort could achieve flight without the aid of an additional flight unit thanks to the lightweight chassis, and the triangular thrusters mounted on its back and legs. The Zowort was primarily developed using aeronautics as a basis. It was built with mid to long-range combat in mind. However, it did not have any defensive armaments, which was why pilots assigned to Zoworts were often instructed to engage enemies at a distance and try to evade incoming attacks. Still, there are some pilots who squeeze out all the unit's potential and get in close during combat .

HG 1/144 Witch from the Mercury CFP-010 Heindree
Bandai
$22.00The CFP-010 Heindree (ハインドリー Haindorī?) is a mobile suit introduced in Mobile Suit Gundam the Witch from Mercury. The latest in the all-purpose Grassley Defense Systems' Hein series, based on their standard Hein OS. Designed for coordinated combat just like the rest of the series, this unit's additional capabilities allow for a broader range of applications. It is the successor to the Heingra, a specialized battle unit which dominated against Gundams during the Vanadis Incident, but its more modest armor and internal components make it more suitable for use in the educational and private sectors.

HG 1/144 HGUC MS-06FZ Zaku II Kai
Bandai
$15.00The MS-06FZ Zaku II Kai is a mobile suit introduced in the OVA Mobile Suit Gundam 0080: War in the Pocket. The Zaku II was one of the second-phase production MS that have been improved by the United Maintenance Plan. The performance of the Zaku II itself has begun to deteriorate due to the appearance of Federation MS and the development of new models by its own forces, so it has been tuned up by feeding back data from new models. In addition, based on the results of the renovation of the MS-06F-2 Zaku II F2 Type, the shape and materials of the armor and the balance of the machine were more thoroughly reviewed, resulting in an appearance that is quite different from the previous Zaku II F-Type.The most significant modification was to the cockpit, which is said to have been so good that even new recruits with insufficient training could handle it. In addition, the apogee motors in various parts of the fuselage and the thrusters in the backpack were increased and made larger, and the total thrust was increased by 70 percent compared to the previous F-Type model. On the other hand, the total amount of propellant had not changed, and the time limit at maximum combat thrust has dropped by half. The armor has also been considerably strengthened and the armament has been redesigned, so it does not lag behind the Federation's RGM-79 GM and has achieved considerable high performance. It also had the option of two different "helmet" designs. The "A-Type" helmet, which was the more common design, was similar to the typical helmet of the Zaku II series. The "B-Type" helmet, also known as "Fritz Helm" was modeled after the Stahlhelm helmet used by the German army in World War II. The Fritz helm was designed for pilots of downed machines to be able to remove the helmet dome and make repairs on their own.Rolled out one month before the end of the war, this machine is the final production model of the Zaku in the One Year War, but the number produced was small. It was only used by some units of the Space Fleet (especially the units made up of school soldiers and new recruits), and never landed on Earth, and it participated in few actual battles.

HG 1/144 HGUC MS-05L Zaku I Sniper Type
Bandai
$17.00The MS-05L Zaku I Sniper is a variant of the MS-05B Zaku I. It first appeared as a part of Harmony of Gundam variations design by Hajime Katoki, but was also featured in Mobile Suit Gundam Unicorn and Model Suit Gunpla Builders Beginning G. A retrofitted version of the MS-05 Zaku I, the MS-05L Zaku I Sniper Type's primary weapon was a beam sniper rifle, which was powered by a backpack-mounted sub-generator. Its head unit was fitted with the same type of composite monoeye as the MS-06E Zaku Reconnaissance Type, granting it the necessary sensor range for long-range sniping. It was also equipped with a pair of head-mounted Vulcan guns for defense. A foldable knee pad was installed in its right knee, which can deploy to stabilize the mobile suit during sniping missions. Essentially, the Zaku I Sniper Type was a self-propelled long-range mega particle cannon turret.

HG 1/144 HG00 GN-002 Gundam Dynames
Bandai
$15.00The GN-002 Gundam Dynames (aka Gundam Dynames, Dynames) is a mobile suit introduced in season one of Mobile Suit Gundam 00 and is piloted by Lockon Stratos. The paramilitary organization, Celestial Being, deployed several Gundams in AD 2307 to eliminate world conflicts through armed interventions, and the Gundam Dynames that specialized in long-range shooting is one of them. Like its fellow Gundams, Dynames has a semi-perpetual GN Drive in the center of its body that provides almost limitless energy and produces special, multifunctional GN Particles. The GN Particles grant outstanding mobility and are also utilized for beam weaponry, attitude control, and stealth purposes as they can cause electromagnetic interference, leaving conventional communications and radar devices useless. The Dynames is a third generation unit developed using the operational data from the second generation GNY-002 Gundam Sadalsuud, inheriting the reconnaissance mobile suit's powerful sensing capabilities that are now utilized for long-range shooting.During combat, the Dynames primarily serves as a sniper as well as a fire support unit for its allies. Its main weapon is the extremely long-range and powerful GN Sniper Rifle, and when operating this rifle, Dynames is in "Sniper Mode", whereby the Gun Camera hidden in its head is exposed and a precision shooting scope in the cockpit is deployed. The Dynames is however not just limited to long-range attacks as it has a variety of guns and weapons, allowing it to engage in close to mid-range combat when needed, and adapt to various types of missions (including solo mission) as well as changing battlefield conditions. Other standard armaments of the Dynames included GN Beam Sabers on its rear waist unit for close combat, GN Missiles on its knees and front waist armor that can be used to deter approaching enemies, and a GN Shield on the left shoulder for defense. As for optional armaments, it can equipped GN Beam Pistols for close to mid-range combat, a GN Full Shield for enhanced defensive capabilities, and a Super Substratospheric Altitude Gun to snipe targets outside the atmosphere from the ground.Beside mounting the GN Beam Sabers, the Dynames' rear waist unit can be used to support the Gundam when it is shooting from seated positions and has a pair of propulsion systems, known as GN Verniers, that create thrust by releasing GN Particles. These verniers are also utilized by other Gundams and have a mechanism whereby their cores are revealed when being activated and when increasing their output. Additionally, the verniers can be moved at the point of attachment, allowing their thrust direction to be adjusted. The overall layout of the Dynames' cockpit is similar to other third generation Gundams, except for two differences. The first is the aforementioned precision shooting scope stored in the ceiling that lowers down when in use and retracts when not needed. The second is a dock on the right side for placing the individual support AI, Haro, which serves as a sub-pilot, controlling various aspects of the Dynames so the Gundam Meister, Lockon Stratos, can focus on shooting using the precision shooting scope.The third generation Gundams deployed in AD 2307 has several common equipment, including a pair of clavicle antennas on the torso that serve as the primary control device for the GN Particles, light purple-colored "GN Cables" on various body locations to facilitate the supply of GN Particles to each part of the Gundam and for attitude control purposes, and GN Condensers placed throughout the body to store excess GN Particles, ensuring a reserve of particles that the Gundam can rely on when its operation consumed more than what the GN Drive can produce instantaneously. There is also the special "Trans-Am System" that the Gundams can activate during an emergency to enhance their thrust and defensive capabilities, as well as increase their output to three times that of their normal specifications for a limited time period. This system also causes the Gundams to glow red, and in Dynames' case, its shooting accuracy is improved as well. Unfortunately, this system is a double-edged sword, as the Gundams' performance will drop dramatically once it ends. Additional optional equipment was also developed for the Dynames, such as the set of sub-aquatic sniper rifle and accompanying sensors that change it into the GN-002/DG014 Gundam Dynames Torpedo and the GNR-001D GN Arms Type-D support mecha that it can dock with to form the more powerful GN-002+GNR-001D GN Armor Type-D. A successor machine with all-round improved performance is later developed based on the Dynames' data and it is known as the GN-006 Cherudim Gundam. Additionally, the Dynames that was moderately damaged during the battle with the UN Forces was eventually refurbished into the GN-002RE Gundam Dynames Repair, and deployed on Earth following the defeat of the A-Laws and the Innovators.
![HG 1/144 Build Metaverse Gundam 00 Command Qan[T] (Desert Type)](http://lascalemodel.com/cdn/shop/files/banh666956_0_300x.png?v=1726175232)
HG 1/144 Build Metaverse Gundam 00 Command Qan[T] (Desert Type)
Bandai
$22.00The GNT-0000SDV Gundam 00 Command Qan[T] (ガンダムダブルオーコマンドクアンタ Gandamu Daburuō Komando Kuanta?) is a Gunpla that appears in the Gundam Breaker Battlogue ONA. It first debuted in the tie-in mobile game Gundam Breaker Mobile. A custom Gunpla with SD Command Gundam elements added to the 00 Qan[T]. In addition to improving the defense power with additional armor, it is possible to fight in any situation with a number of new weapons for both close and far. The 00 Command Qan[T] is also equipped with a sub-energy tank for prolonged battles and its combat style is reminiscent of an elite soldier who detaches used-up weaponry to increase mobility and strives to complete a mission even if it only has its Combat Knives left.

30MM 1/144 EXM-A9N Spinatio (Ninja Type)
Bandai
$16.00ExAMACS units with enhanced command communication abilities developed by the Byron Forces around the same time as the Portanova. They are equipped with a multifunctional radar placed on top of their backpacks that allows units to instantly analyze combat situations. They are specifically designed for local battles and have highly expandable forearms and legs with enhanced bulletproof capabilities. The range of power of the standardly equipped handguns can be changed by using expansion modules.

HG 1/144 HGGS MBF-P02 Gundam Astray Red Frame
Bandai
$15.00The MBF-P02 Gundam Astray Red Frame is a Mobile Suit introduced in the manga Mobile Suit Gundam SEED Astray. It is piloted by Junk Guild member Lowe Guele. The MBF-P02 Gundam Astray Red Frame is one of five identical prototype mobile suits developed by Orb using stolen data from the Earth Alliance's G Project. Its original concept was to be a MS that could be piloted by Naturals, and it was eventually loaded with an incomplete Natural-use OS. Most of the technology from the G Project is successfully copied with the exception of Phase Shift armor. In its place, the Gundam Astrays' designers made the machines out of a lighter foam metal compound, with minimal armor over the frame. This made the mobile suits lighter and faster than their G Project counterparts. All five prototype Gundam Astrays are also designed with a backpack that can be lowered to the back skirt armor, allowing the mounting of additional equipment on the back. The Red Frame initially had the same armament as the other prototype Gundam Astrays, consisting of two head-mounted "Igelstellung" 75mm multi-barrel CIWS, two backpack-mounted beam sabers for close combat, a Type 71 beam rifle and a physical shield. Red Frame's pilot, Lowe Guele, eventually acquired another armament - the "Gerbera Straight" katana. To wield this katana effectively, the Red Frame's OS was modified. Lowe also created a 150 meter long version of this sword, however it cannot be carried by the Red Frame in its normal configuration. Lowe also designed a set of upgrades for Red Frame, but they are used to repair Gai's damaged MBF-P03 Gundam Astray Blue Frame instead. When there is a need for flight capability, Red Frame can be fitted with the Flight Unit and when it needs to dive underwater, it can use the Salvage Unit. After his return from Mars, Lowe developed the Caletvwlch and the Ddraig Head. The former is a multifunctional handheld equipment, while the latter is a special head unit designed to complement the former. Like other mobile suits that use beam weapons, the Red Frame is equipped with hand plugs to exchange energy with weapons the suit carries. Although considered a misuse of the system, the energy from the hand plug can be manipulated into an energy ball and discharged. This is often used by Lowe as an emergency weapon, for example to temporarily blind enemies. The mysterious organization, Librarian Works, later created a copy of the Red Frame. Known as Replica Red Frame, it has the same capabilities as the real Red Frame.

HG 1/144 HGIBO ASW-G-01 Gundam Bael
Bandai
$17.00The ASW-G-01 Gundam Bael (ガンダムバエル Gandamu Baeru?) is a mobile suit introduced in the second season of Mobile Suit Gundam IRON-BLOODED ORPHANS anime. It was originally piloted by Agnika Kaieru, and more than 300 years later by McGillis Fareed. During the Calamity War, a quarter of the human population was lost due to the extensive fighting against the mobile armors, which had been developed for the efficient extermination of human beings. To stop these mobile armors, the Alaya-Vijnana System, which establishes compatibility between a person and a machine, was employed. During this process, 72 Gundam Frames were produced, and they came to be perceived as special due to the outstanding military achievement of Agnika Kaieru, who piloted the first Gundam Frame, the Gundam Bael.Compared to subsequent Gundam Frames, the Gundam Bael is a relatively standard unit with little special features. However, it was a key mobile suit in ending the war and became a figurehead of the Gjallarhorn. Thus, Agnika and Gundam Bael were idolized during those times. Gundam Bael's main armaments consisted only of two swords, and this was proof that Agnika was fully compatible with the mobile suit via the Alaya-Vijnana System. For Agnika, who realized superhuman reactions, no other armament was better than these unbreakable swords. Agnika passed away as the Gundam Bael went to sleep, and it was believed his soul resided within the Gundam Bael.The Gundam Bael was stored in the Gjallarhorn's headquarters, Vingolf, until it was awakened by McGillis Fareed. The mobile suit remained unchanged during its long slumber, so its frame structure, as well as its armaments, are as they were when Agnika was the pilot. The emblem on its left shoulder is a symbol of the Gjallarhorn at the time of the organization's formation.

HG 1/144 HGAC OZ-06MS Leo
Bandai
$14.00The OZ-06MS Leo is a mass-produced general purpose mobile suit introduced in the TV anime Mobile Suit Gundam Wing. The OZ-06MS Leo was the first mass-produced MS developed by OZ, based on the blueprints of the first combat MS in A.C. history, the "OZ-00MS Tallgeese". The engineer in charge of the development was OZ's Seis Clark. Unlike the Tallgeese, which was so focused on performance that its design disregarded safety and could not be piloted by ordinary people, the Leo was designed to be piloted by normal soldiers, and focused on ease of production and versatility. This was also due to OZ and the United Earth Sphere Alliance (UESA) being at odds with the space colonies at the time of its development, and priority was placed on production and its role as a threatening machine rather than excessive performance. As a result, it was simplified and downsized to a level where it could be mass-produced. The back, front and rear of both shoulders, and the sides of the thighs have mechanisms for attaching optional equipment, and by changing its equipment, the Leo can respond to a variety of battlefields. In addition, a performance index for mobile suit, the "Ability Level", was established by setting each of the Leo's performance values at 100 and evaluating the performance of other machines against them.

HG 1/144 Witch from the Mercury F/D-20 Zowort Heavy
Bandai
$22.00F/D-20 Zowort Heavy is a mobile suit introduced in Mobile Suit Gundam the Witch from Mercury. The Zowort Heavy is a combat-oriented model of the F/D-19 Zowort with significant upgrades. Its components have been treated to allow sustained use in multitudes of harsh environments in atmospheric conditions. Its stability in flight has also been improved over the basic model giving it a surplus loading capacity enabling large-scale firearms to be mounted on the back which is unrecomended for the Zowort. The left and right sides of the backpack could be outfitted with heavy weaponry depending on the pilot's requirements.

HG 1/144 HGCC WD-M01 ∀ Turn A Gundam
Bandai
$19.00The System-∀99 ∀ Gundam (pronounced as "Turn A Gundam", aka "∀", "White Doll" or "Mustache") is the titular mobile suit of Turn A Gundam. It is piloted primarily by Loran Cehack. The Turn A Gundam was originally created for interstellar warfare in anticipation of invasion of forces outside the solar system and said to be the culmination of super-advanced technologies from generations past. As opposed to other weapons which were created to meet a specific purpose, the Turn A's design was unusual and built entirely on the premise of "single-machine operation", with the versatility to perform all military operations on its own. Owing to the fear of extrasolar forces, the Turn A was constructed with all restrictions of the development of weapons removed, and as a result no longer fits into the concept of a weapon.Unlike other mobile suits (even those that predate the Turn A itself), the Turn A is powered by a DHGCP (Discontinuous Hyperoscillation Gauge Collapsing Pile) power plant in its abdomen, which is essentially an artificial black hole. This is used in conjunction with an innovative reactionless I-Field Beam Drive system to move the suit's limbs and provide thrust. As a result, the unit's chest is almost entirely hollow and can equip various weapons inside, such as missiles or beam cannons. The legs are also hollow due to the use of the I-Field Beam Drive, and contain an array of thruster vanes which are used to power the suit's jumps and flight. This leaves the back of the unit free to store more weapons and equipment if desired. The Gundam's armor is also covered with self-repairing nanomachines, dubbed "Nanoskin".The Turn A's armaments consisted of a beam rifle, two beam cannons, two beam sabers and a shield. It can also mount various weapons (such as missiles) in the chest to compliment its basic weaponry. It can also use a powerful I-Field capable of covering a large area and affecting matter. To further enhance its combat power, the Turn A has support areas called DOC Bases (Device Operation Control) which hold various armaments, enabling it to adapt to the situation at hand by equipping a variety of weapons. One of these DOC Bases was discovered in C.C. 2345. However, the base had been sealed and not maintained by any nanomachines during the thousands of years the Turn A was buried, so almost all its weapons crumbled upon exposure to air. The only weapon still usable was a hyper hammer that was simple and thick enough to remain intact for a short while without maintenance.The Turn A's on-board nanomachines are capable of a devastating attack known as the "Moonlight Butterfly" (named after the visual appearance of the attack). The Turn A's nanomachines have the ability to disintegrate all matter that includes artificial objects as well as organic materials, and can merge with weather systems to create large ionic storms capable of covering a much wider area. These nanomachines can be used offensively or defensively for all range attack and defense. The nanomachines are capable not only of destroying technology however, but of maintaining and repairing it too. This ability is not instantaneous though, and it requires a considerable amount of time. The back weapon pallet of the Turn A was originally planned to be equipped with weapons based on the Seventh Generation Minovsky Physical Theory (7th-GMPT), a nondestructive MS-incapacitating technology, during the conceptual phase of the "System ∀". However, the development of such weapons was not completed in time for the demonstration test for "System ∀", and so beam sabers were provisionally installed for melee combat.

Gundam MG/RG/HG/EG Multipurpose Display Action Base
LA Scale Model
$10.00 $8.00Scale: 1/100 Supported Grade: MG/RG/HG/EG Features: Adjustable angels Adjustable height 4 Colors to choose from