Under $25

The ASW-G-08 Gundam Barbatos is the main mobile suit in the first season of the Mobile Suit Gundam IRON-BLOODED ORPHANS anime and is piloted by Mikazuki Augus. The Gundam Barbatos is one of 72 "Gundam" frames that was produced and used in the Calamity War, roughly 300 years ago. After it was recovered, Chryse Guard Security used it as a power reactor. Aside from the fact that its Ahab Reactors were still functional, this was done mainly because Barbatos' cockpit was missing when it was found. A new cockpit similar to the one used by the CGS mobile workers was installed prior to its redeployment by the 3rd Group. Poor maintenance over the centuries since the Calamity War has degraded the Barbatos' armor and full combat potential. This is later rectified by Teiwaz technicians, who not only restored the Barbatos to its original look but also returned it back to a performance close to its original.Gundam units like the Barbatos are able to achieve a high energy output because they possess two Ahab Reactors. However because it is difficult to run them in parallel operation, only a total of 72 Gundam frames were ever produced. The burden experienced by the pilot is high as a result of the high output and maneuverability; however it's mitigated by the implementation of Inertial Control due to the use of Ahab Particles generated from the reactor when a phase transition occurs inside its vacuum device. The cockpit structure is positioned in front of the reactor to take advantage of this. Among the same frame machines, Barbatos has been adjusted for an emphasis on versatility, it has the potential to adapt to every circumstances by exchanging its equipment. It can also use weapons and armor from defeated enemies to improve its fighting capabilities.

The Tickbalang (ティックバラン Tikkubaran?) is a flight system from Mobile Suit Gundam the Witch from Mercury . It was a flatbed type flight system designed by Peil Technologies to allow mobile suits to cruise for long distances. Grips and footrests on top allowed a mobile suit to latch on. A mobile suit could also hang from the handles stored in the underbelly. Outfitted with 6 vectored nozzles for maximum propulsion, it could transport two standard mobile suits at once, one above and one below .

The MSN-00100 (MSN-100, MSN-001) Hyaku Shiki (百式, "Type 100") is a prototype Mobile Suit introduced in Mobile Suit Zeta Gundam and reappeared in the sequel Mobile Suit Gundam ZZ. It was primarily piloted by Quattro Bajeena during the Gryps Conflict and later by Beecha Oleg in the First Neo Zeon War. The Hyaku Shiki is a mobile suit built by Anaheim Electronics as part of the "Zeta Project". It was originally designed as the prototype transformable mobile suit, MSN-001 Delta Gundam which incorporated Anaheim Electronics' own "movable frame" technology and backpack-mounted wing binders for additional mobility. However, defects in the frame design led to problems in its transformation and the machine's development was soon abandoned.When the AEUG captured the Titans' RX-178 Gundam Mk-II, the movable frame technology of this newly acquired mobile suit assisted greatly in the advancement of the Zeta Project and also led to the redesigning of the Delta Gundam into the high performance, non-transformable Hyaku Shiki. Hyaku Shiki, which means 'Type 100' in Japanese, is named as such by its lead developer, Professor M.Nagano who hoped to create a mobile suit design that would endure for a hundred years. Because of the reliability of each device and its ease of access to the interior, the Hyaku Shiki was also used as a testbed for operational testing of various equipment under development.The Hyaku Shiki's gold colored appearance is due to the application of a beam-resistant coating on its armor, giving it some limited protection against beam attacks. The suit also has a unique sensor called the Image Directive Encode (IDE) system, which emits a red pattern when scanning or during precision aiming. It also retains several design features from the original Delta Gundam design, most notably the legs' front armor and backpack-mounted wing binders. The Delta Gundam's transformation capabilities later resurfaced in the MSN-001A1 Delta Plus.

The MS-04 Bugu (MS-04 ブグ?) is a mobile suit featured in the Mobile Suit Gundam: The Origin and Mobile Suit Gundam: The Origin MSD Cucuruz Doan's Island manga, the Mobile Suit Gundam: The Origin OVA, its television recut, and the Mobile Suit Discovery design series. Developed by Zeonic from the YMS-03 Waff , tests were conducted at the Dark Colony in U.C. 0077 . In U.C. 0078, Ramba Ral's Bugu fought in the Battle of Mare Smythii . The development of the mobile suit took a huge step forward thanks to the compact fusion reactor and fluid pulse system designed by Dr. Torenov Y. Minovsky, resulting in the birth of the prototype YMS-03 Waff. The MS-04 Bugu was completed using data gathered with the Waff, and it was designed with a focus on its mobility, maneuverability, and ease of production as a weapon, making this the first machine capable of handling genuine combat. To improve its mobility, the power pipes that transmitted energy as part of the fluid pulse system were attached to the outside of its armor, and the increased supply of the energy used to drive its limb joints gave it very high maneuverability. However, as is often the case in the development of high-performance prototypes, it was designed with no regard for ease of production. With its high production cost, it was unsuited for mass production, and the role of official mass-produced machine was given to the redesigned MS-05 Zaku I. Though the Bugu never entered mass production, several units were built .

The RGM-79G GM Command is a mobile suit that first appeared in the OVA Mobile Suit Gundam 0080: War in the Pocket. Following the success of the RGM-79D GM Cold Districts Type, a late production type GM deployed in the One Year War, development of new localized warfare machines using the suit as a basis started. The basic concept is to maintain the fundamental design of the GM Cold Districts Type while improving on its output and mobility. Demands of MS pilots who were unsatisfied with the original RGM-79 GM's performance were also taken into account, and with the upcoming counter offensive in space against the Principality of Zeon in mind, a decision was made to simultaneously developed a ground use unit and a space use unit. The end results were the ground use GM Command, and the space use RGM-79GS GM Command Space Type. Both suits were also used to collect data for the development of next generation mass production models.The GM Command is also called the "Colony Type" as it specialized in defending bases in space colonies and surrounding areas. For this reason, its output and weaponry were adjusted to reduce fatal damage to the colony's structure and walls. Specifications wise, the GM Command series is said to be a match for the Zeon's MS-14A Gelgoog, but as many of the machines were deployed to areas outside of the main battlefield that had low urgency, its functions were often suppressed and it could not display its full potential. To improve on the GM Cold Districts Type’s mobility, the GM Command series’ thrusters are distributed all over its body. Furthermore, the backpack, which contains the main propulsion system, was also boldly redesigned and optimized separately for the GM Command and GM Command Space Type. The placements of the thruster verniers on the GM Command's backpack are optimized based on simulations of operation within colonies, and they are pointed downwards for movements under gravity. Various sensors are also added to the backpack, replacing the normal GM's backpack beam saber rack.With the GM Command series use of a generator with higher output, intakes and ducts are also added to enhance cooling functions. This higher output generator is however a double-edged sword. Although it allows for full-scale operation of equipment like beam gun and beam rifle, such generators at that time could only be manufactured in zero gravity facilities, so mass production of the suit then at the Earth Federation Forces’ largest production facility at Jaburo was not possible. This had a negative impact on the suit's production number during the war.Due to the accumulation of manufacturing and designing knowledge, the GM Command series' maintainability and operability was greatly improved compared to the very first mass production models that had inconsistent standards. Unlike the normal GM, the GM Command series has additional sensors in the head such as environment monitoring sensors to thoroughly detect human presence/survivability, and this boosts the suit's anti-personnel and anti-material evasive capabilities. The GM Command series is also the first in the GM series to utilize mono-eye camera in the head to improve producibility. Communication capabilities are enhanced via the shoulder antenna, which also helps to prevent interferences or jamming caused by frequency bands used by civilians inside and outside of colonies. It was relatively easy to change the GM Command series' armor, backpack, and other parts; furthermore, its specifications can also be changed with little modification to the base structures. The suit served as the base for the RGM-79SP GM Sniper II.As the GM Command series was deployed as replenishment units during the war, only a small number were produced. Assignment of the machine to experienced MS pilots was prioritized, and as these pilots were often appointed as commanders of newly formed MS platoon, the GM Command series also gained a reputation as a 'Commander Use Unit' even though it was not specifically built for commanders. There were also cases where the suit was supplied on a platoon scale, leading to a considerable number of operational units in total.

The BB Senshi #390 Full Armor Unicorn Gundam is a Super Deformed (SD) model kit that offers a compact and stylized rendition of the formidable Full Armor Unicorn Gundam from the Mobile Suit Gundam Unicorn series. This kit provides an engaging building experience, capturing the essence of the mobile suit's heavily armed configuration in a charming SD format. Key Features: Scale and Materials: Non-scale model kit crafted from high-quality injection-molded plastic, ensuring durability and ease of assembly. Articulation: Features multiple points of articulation, allowing for expressive poses that showcase its dynamic design. Weaponry and Accessories: Equipped with an array of armaments, including Beam Gatling Guns, Hyper Bazookas, and Shields, providing a comprehensive arsenal for dynamic display options. Design Details: Faithfully reproduces the Full Armor Unicorn Gundam's distinctive features, such as its unique armor and weapon configurations, in a super-deformed style. Release Information: Released in April 2014 as part of Bandai's BB Senshi line, this kit brings the Full Armor Unicorn Gundam to life in a distinctive SD style, appealing to both collectors and builders. The BB Senshi #390 Full Armor Unicorn Gundam is an excellent addition for fans of the Gundam Unicorn series and SD model enthusiasts, offering both a rewarding build and a unique display piece.

ExAMACS units with enhanced command communication abilities developed by the Byron Forces around the same time as the Portanova. They are equipped with a multifunctional radar placed on top of their backpacks that allows units to instantly analyze combat situations. They are specifically designed for local battles and have highly expandable forearms and legs with enhanced bulletproof capabilities. The range of power of the standardly equipped handguns can be changed by using expansion modules.

The MSJ-06II-A Tieren Ground Type (aka Tieren Ground Type, Tieren) is a mobile suit introduced in season one of Mobile Suit Gundam 00.

The CFP-013 Heindree Sturm (ハインドリー・シュトルム Haindorī Shutorumu?) is a mobile suit introduced in Mobile Suit Gundam the Witch from Mercury. Part of the Heindree Series, the latest all-purpose Mobile Suits produced by Grassley Defence Systems based on the Hein OS the Hendree Sturm is optimized for active combat. It is a 4th generation mobile suit and the new flagship model of Grassley having been significantly upgraded based on data and engineering expertise gathered from the production of its predecessor, the Heingra.

The GX-9900 Gundam X (aka Gundam X, GX) is a limited production mobile suit built by the United Nations Earth, and the titular mobile suit of After War Gundam X. Its pilot include Jamil Neate and Garrod Ran. Another slightly different unit appeared in the manga sequel, After War Gundam X: Under the Moonlight, and is piloted by Rick Aller. Built at the height of MS advancement by the UNE, the GX-9900 Gundam X is one of the most advanced MS of its time. It was produced in limited numbers and deployed near the end of the 7th Space War. After the environmental devastation at the end of the war, MS development on Earth became stagnant as humanity recovered; Gundam X and its brethren Gundam series thus remain top-of-the-line after 15 years. Because the UNE no longer existed, there was no regulation over the Gundams and they found new life in the hands of the Vultures.The Gundam X carries a powerful beam cannon known as the Satellite Cannon. The cannon requires power beyond what Gundam X is capable of on its own, so UNE engineers created the D.O.M.E. lunar microwave facility to power it. When the Satellite Cannon is activated, solar power collected at the facility is sent to the Gundam X via a microwave beam and stored in the large reflector panels mounted on the suit's back, enabling the cannon to fire a particle beam powerful enough to destroy a space colony with a single shot. While the Satellite Cannon is indeed powerful, it requires a lengthy time to charge and fire. Enemy units can take this opportunity to attack Gundam X and disrupt its ability to absorb the microwave beam. During the war, several relay satellites were positioned in Earth's orbit that allowed the microwave beam from D.O.M.E. to be transmitted to any location. However, they were all destroyed or damaged in the war, so this resulted in the Satellite Cannon being usable only when there is a clear line-of-sight to the lunar facility.Other weapons on the Gundam X include a large beam sword, four chest mounted vulcan guns, and a shield buster rifle. This allows Gundam X to be adaptable and versatile in most combat situations. Both the large beam sword and the shield buster rifle can utilize the stored microwave energy. The Vultures who have salvaged Gundam X units also gave these machines new weaponry such as shoulder vulcan, torpedo launcher, holster shield, buster sheath rifle, etc. The Gundam X was also designed to exploit the capabilities of its Newtype pilot, but was usable by regular humans as well. A Newtype pilot at the helm can use the Flash System to mentally command remote controlled drone versions of Gundam X, the FX-9900 GX-Bits. These GX-Bits are very similar in design to the Gundam X, and in combat, they are used for coordinated attacks. For regular human pilot, the bits are useless as UNE engineers never created an alternative control system for them to exploit the full potential of Gundam X.The UNE's Gundam series, including Gundam X, has a simple security measure: a G-Controller, a detachable control stick that also serves as the activation key for the mobile suits. However, this is not a strong security measure, as any G-Controller can be used to activate the Gundam. A skilled MS engineer can also hot-wire the system, bypassing the need for a G-Controller to activate the Gundam, and install a new control stick to control the machine.Garrod's unit was defeated by a Newtype pilot utilizing RMSN-008 Bertigo and then upgraded into the GX-9900-DV Gundam X Divider. The New UNE later created the GX-9901-DX Gundam Double X as Gundam X's successor.

The MS-06C-6/R6 Zaku II is a mobile suit featured in the Mobile Suit Gundam: The Origin manga. This variant of the MS-06 Zaku II was used by Char Aznable's crew on the Falmer.The Zaku II units deployed during the first battles of the One Year War, such as the Clash of Loum, were mainly early production models known as the Type C. The Type C units were developed to be utilized in space and were later customized into the Type C-5 and Type C-6. Both Types C-5 and C-6 had cockpit hatches shaped differently from the Type C and Type F (which appeared after Type C-6), and a laser gun was mounted on the left side of the chest.. The Type C-6 also had a Vulcan gun added to the right side of the chest.. Overall, the Type C-6 has enhanced armor and weaponry and is produced in limited numbers.Various armaments were proposed and developed for the Zaku II, such as the optional parts referred to as the R6 kit. The R6 kits were mainly used by the Type C-5, C-6, and F units, and consisted of two weapons: a 20mm machine gun pod that was mounted on the forearm and 30mm Vulcan guns mounted on the left and right sides of the chest. An "/R6" was added to the model numbers of Zaku II units equipped with one or both of the R6 kit weapons.

The RGC-83 GM Cannon II is a mobile suit introduced in the OVA Mobile Suit Gundam 0083: Stardust Memory. The successor of the RGC-80 GM Cannon, a medium-range support mobile suit developed in the late stage of the One Year War, the RGC-83 GM Cannon II was based on the RX-77D Guncannon Mass Production Type and inherited the Chobam Armor concept of the RX-78NT-1 Gundam NT-1. It was the culmination of the Federation's artillery support mobile suit development.Thanks to improvement in technology and productivity, the GM Cannon II was installed with a powerful generator, allowing it to be equipped with two shoulder-mounted beam cannons. This made it the first mass production unit to have high-powered beam cannons. These beam cannons were usually powered by the generator itself, but could also be powered by the two Energy CAP mounted on its backpack. A sighting device located on the pilot seat's headrest can be used to aim the beam cannons. For precision shooting under gravity, the stabilized gear on the waist could be deployed to stabilize the machine.The GM Cannon II's other weapons included a pair of head-mounted 60mm vulcan guns, a shortened beam saber stored in the left forearm, and the same GM Rifle and shield used by the RGM-79N GM Custom. Due to its role as a fire support mobile suit, the beam saber was only meant for close-quarters self-defense and it rarely had the chance to use it. The GM Cannon II also has relatively poor mobility due to the mass of its weapons and armor.The design of the GM Cannon II's basic components prioritized parts interchangeability with GM type mobile suits. Parts of its exterior was covered in composite armor, similar to the Chobam Armor used by the RX-78NT-1 "Alex". This composite armor improved bullet resistance while keeping the mobile suit's weight down. Unlike the Alex's Chobam Armor, the composite armor was built directly onto the frame and could not be purged when damaged. Despite their structural differences to Alex's armor, the composite armor was often referred to as "Chobam Armor" for convenience.Like the GM Custom, there was a plan to mass produce the GM Cannon II, but due to issues such as cost and the fact that the machine was meant to operate alongside the GM Custom, only a few units were actually deployed. After the Delaz Conflict, the project itself, including its development staff, was placed under the control of the Titans. The GM Cannon II's production was halted and a direct successor to it was never developed.

The MSJ-121 Demi Trainer (デミトレーナー Demitorēnā?) is a mobile suit introduced in Mobile Suit Gundam the Witch from Mercury. Demi Trainers were developed for students of the Asticassia School of Technology, a school created for training personnel in the space development industry. The unit's design is stripped of all superfluous components, affording it superb maneuverability and serviceability. The MS can be modified by anyone with basic technical knowledge, giving it excellent potential for customization. In addition to these facets, Demi Trainers are said to be the best choice for those learning to pilot, making them an obvious choice for students at the school. If asked which MS they felt most comfortable with, students are most likely to answer, "Demi Trainer".

The RX-78-2 Gundam is the titular mobile suit of Mobile Suit Gundam television series. Part of the RX-78 Gundam series, it was built in secret on Side 7. The Gundam would turn the tide of war in favor of the Earth Federation during the One Year War against the Principality of Zeon. It was primarily piloted by Amuro Ray.

Entry Grade 1/144 RX093 νGUNDAM The RX-93 ν Gundam (aka Nu Gundam, Nu) is a mobile suit that appears in Mobile Suit Gundam: Char's Counterattack. It was designed and piloted by Amuro Ray.

The EMS-10 Zudah was a prototype Mobile Suit developed by Zimmad for the Principality of Zeon before the One Year War. It appears in the OVA series Mobile Suit Gundam MS IGLOO. During the Principality of Zeon's race to develop a superior fighting machine, four prototype mobile suits were developed from different engineering companies: one of these was Zimmad's EMS-04 Zudah. It had a good power plant with unprecedented thrust and acceleration. It also adopted a prototype engine known as the Jupiter engine which was based on Zimmad's prototype Mercury engine. However, the suit did have limits: if the engines were overexerted, the suit would overload and break apart. Zeonic Company used this information to outdo the Zudah with their well-known YMS-05 Zaku and successfully marketed the Zaku series.This, however, was not the end of the story. The Zudah was resurrected under the model number EMS-10, with some minor improvements and cosmetic differences. Its left shoulder was refitted with a movable shield that could be swung to the back, and it was equipped with spikes for melee combat. The EMS-10 was said to be fitted with the improved "Saturn" engine, previously used on the MS-09R Rick Dom (though whether this is true or merely propaganda is unknown). A number of new weapons were also added, including all of the existing Zaku weapons, as well as a new 135mm anti-ship rifle. However, despite these improvements, the suit was still prone to breaking apart from overexertion.

The RX-75 Guntank, also known as the RX-75-4 Guntank, is a mobile suit from the Mobile Suit Gundam television series.The RX-75 Guntank was the first prototype Earth Federation Forces mobile suit developed by Operation V. However, it was said to be closer to a tank rather than a mobile suit. A number of companies such as Takim and Hervic participated in its development. The Guntank had the torso and arms of a mobile suit, but possessed caterpillar treads for legs. Initially, it was designed to be piloted by a crew of two, with a gunner in the canopy-style cockpit on the head and a driver in another cockpit in the torso. However, it was later changed to be controlled by a single pilot in the canopy-style cockpit. Like all "Operation V" mobile suits, the Guntank used the Core Block System.Its reactor is a hybrid type of nuclear reactors and gas turbines, and its output is insufficient for powering beam weapons. The Guntank's main weapons are twin 120mm cannons, which are effective at long and medium ranges. Its arms have four-barrel missile launchers instead of hands, and they provided good cover fire against enemy tanks and aircraft, but are less effective against enemy mobile suits. A major flaw of the Guntank is its inability to turn its torso, making it difficult to aim the cannons at moving targets, as the Guntank must reposition itself. Another major flaw is that its design was primarily for ground combat, resulting in it having poor maneuverability in space.

CFK-029 Michaelis (ミカエリス Mikaerisu?) is a mobile suit introduced in Mobile Suit Gundam the Witch from Mercury. It is piloted by Shaddiq Zenelli. The Michaelis is a new model MS developed by Grassley Defense Systems that is equipped with the same "Antidote" Anti-GUND Format equipment seen on its predecessor, the CEK-040 Beguir-Beu. The Beam Bracer, a combination armament, replaces the manipulator on its right arm.

The RX-78-2 Gundam is the titular mobile suit of Mobile Suit Gundam television series. Part of the RX-78 Gundam series, it was built in secret on Side 7. The Gundam would turn the tide of war in favor of the Earth Federation during the One Year War against the Principality of Zeon. It was primarily piloted by Amuro Ray.

The RGM-79FP GM Striker is a ground close combat mobile suit and variation of the RGM-79C GM Type C. It was featured in the original design series Harmony of Gundam, the manga series Mobile Suit Gundam - Acguy: 2250 Miles Across North America, as well as the manga series Mobile Suit Gundam: We're Federation Hooligans!! and its sequel manga series Mobile Suit Gundam Katana. From the data collected by the RX-78-2 Gundam and the RX-79［G］ Gundam Ground Type, the Earth Federation Forces recognized the frequent occurrence of close combat during mobile suit battles, as well as the effectiveness of the Principality of Zeon's close combat-specialized mobile suit, the MS-07B Gouf. It was decided that the RGM-79C GM Type C, one of the general performance improvement variants of the RGM-79 GM still in development, would serve as the basis of a specialized close combat GM variant.The GM Striker was equipped with a set of full body additional armor known as Wearable Armor, based on the reactive armor used by the RGM-79F Desert GM as well as existing research on Chobam Armor, designed to protect the mobile suit from the ballistic weapons used by Zeon mobile suits. It was also fitted with a high-thrust backpack and improved leg thrusters. Weapons wise, it is equipped with one to two Beam Sabers, two Vulcan Guns, a 100mm Machine Gun, as well as an experimental Twin Beam Spear, a weapons with twice the firepower and reach of the beam saber. Finally, it has a Spike Shield, which can serve as a striking weapon in addition to defense.